LinPicco Axxx (PDF 337,0 kB) - IST AG Innovative Sensor Technology

LinPicco Axxx BasicCapacitive Humidity ModuleWith calibrated and linearized analog output signalBenefits & Characteristics••••••••Precise humidity measurementFully calibratedVery low drift due to wide sensor areaVarious analog output signalsEasy to integrateModule with cable and external sensor availablePrint moisture protectedCustomer specific module available upon requestIllustrationTechnical DataDimensions (L x W x T in mm):* 47 x 10 x 2.8Operating humidity range:0 % RH to 100 % RHOperating temperature range:*-25 °C to +85 °C (-50 °C to +150 °C with cable and external sensor elements)Humidity sensor:*P14 SMDTemperature sensor:*Pt1000 or Pt100 (DIN EN 60751, F0.3), loop-throughAccuracy:< +/- 3 % RH (15 % RH to 85 % RH at 23 °C)Response time t 63: < 5 s (50 % RH to 0 % RH) at 23 °CStorage temperature:-40 °C to +80 °C at max. 95 % RH non condensingCable (cable and external sensor version only):* PTFE, 1 mOperating voltage (V CC):Current consumption:A420 A01 A058 to 10 VDC (max.load resistor 300 Ohm)4 mA to 20 mA (twowire operation)7 to 32 VDC (recommended7 V to 9 V)< 3 mA < 3 mAOutput signal (0 % to 100 % RH): 4 mA to 20 mA 0 V to 1 V 0 V to 5 VW5 pin assignment: 1) Pt1000 Pt1000 Pt1000W6 pin assignment: 1) Pt1000 Pt1000 Pt1000W7 pin assignment:Current loop returnW8 pin assignment: GND GND7 to 32 VDC (recommended7 V to 9 V)W9 pin assignment: Analog output Analog outputW10 pin assignment: Current loop V CC+ V CC+ V CC+* Customer specific alternatives available1) Does not apply for module with cable and external sensor1

LinPicco Axxx BasicCapacitive Humidity ModuleWith calibrated and linearized analog output signalPin assignment:Order Information - ModuleA420 A01 A05Nominal resistance: 100 Ohm at 0 °CLinPicco (TM) Basic A420-G LinPicco (TM) Basic A01-G LinPicco (TM) Basic A05-GOrder code 150.00016 150.00029 150.00018Nominal resistance: 1000 Ohm at 0 °CLinPicco (TM) Basic A420-G LinPicco (TM) Basic A01-G LinPicco (TM) Basic A05-GOrder code 150.00010 150.00007 150.00008DHLinPicco_E2.0All mechanical dimensions are valid at 25 °C ambient temperature, if not differently indicated • All data except the mechanical dimensions only have information purposes and are not to be understood as assuredcharacteristics • Technical changes without previous announcement as well as mistakes reserved • The information on this data sheet was examined carefully and will be accepted as correct; No liability in caseof mistakes • Load with extreme values during a longer period can affect the reliability • The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior writtenconsent of the copyright owner • Typing errors and mistakes reserved • Product specifications are subject to change without notice • All rights reserved2