Platelet Depletion Procedures - Terumo BCT

More documents

Recommendations

Info

Platelet Depletions Using Versions 6.1 and 7.0 (cont)4. Change the inlet:AC ratio to 6:1:• To disable custom ratio ramping, press YES inresponse to the message “Disable customInlet:AC ratio protocol for this run only?”5. Increase the target run time to process1 to 1.5 x TBV:• Press the TARGET key and increase time.Note: Inlet volume processed minus ACD-A volumeequals blood volume processed.PN 306670-701 ©2008 CaridianBCT
Platelet Depletions Using Versions 6.1 and 7.0 (cont)6. Determine the target collect flow rate:- Platelet conc. (10 3 /µL) = Collect flow rate (CFR)500- Minimum collect flow rate = 2 mL/min7. Change the target collect volume to achieve CFR:- Desired CFR x target procedure time = target collect volume- Press TARGET key and change collect volumePN 306670-701 ©2008 CaridianBCT
Page 1 and 2: Welcome toeSessionsPresented by Car
Page 3 and 4: Presentation Objectives• Identify
Page 6 and 7: Procedure GoalsReduction of greatly
Page 8 and 9: Procedure Considerations: Fluid Bal
Page 10 and 11: Procedure Considerations: Fluid Bal
Page 12 and 13: Procedure Considerations: Disposabl
Page 14 and 15: Platelet Depletions Using Versions
Page 22: References and Resources1. “Clini

Platelet Depletion Procedures - Terumo BCT

Create successful ePaper yourself

Delete template?

Save as template?