DoubleWall Containment Pricelist - Bravo

CPTS-334” PVC Viewport& AlcrynBootCOPWQ-37COPWS-33CTS-3332” COVERS WITH SEAL AND LATCHESPart Number Description ListCPTS-33 Cover for Dual Phil-Tite spill buckets for 32” Reducer $ 610CPTDS-33 Cover for Phil-Tite Diesel spill bucket for 32” Reducer 560COPWS-33* (1) Cover for Dual OPW spill buckets for 32” Reducer 510COPWDS-33* (1) Cover for OPW Diesel spill bucket for 32” Reducer 510CCNIS-33* (2) Cover for Dual CNI spill buckets for 32” Reducer 510CCNIDS-33* (2) Cover for CNI Diesel spill bucket for 32” Reducer 510CTS-33* (3) Cover for Turbine for 32” Reducer 430INSPECTION PORT OPTIONSCO-IP4 Optional 4” PVC Inspection port for CL, CTW and CTS covers $ 3036” COVERS WITH SEAL AND LATCHESPart Number Description ListCPTS-37 Cover for Dual Phil-Tite spill buckets for 36” Reducer $ 660CPTDS-37 Cover for Phil-Tite Diesel spill bucket for 36” Reducer 610COPWS-37* (1) Cover for Dual OPW spill buckets for 36” Reducer 590COPWDS-37* (1) Cover for OPW Diesel spill bucket for 36” Reducer 590COPWQS-37 Cover for OPW Quad spill buckets for 36” Reducer 730COPWQDS-37 Cover for OPW Quad Diesel spill buckets for 36” Reducer 730CCNIS-37* (2) Cover for Dual CNI spill buckets for 36” Reducer 590CCNIDS-37* (2) Cover for CNI Diesel spill bucket for 36” Reducer 590CTS-37* (3) Cover for Turbine for 36” Reducer 560DIMENSIONS/ ORDER INFORMATION FOR COVERSManholeReducersPart Number Manuf. Min. O.D. Ht. Spill Bucket Provided ViewportCPTS-33 / 37 Phil T. 36” / 42” 5-1/2” Two, 16” O.C. Yes YesCPTDS-33 / 37 Phil T. 36” / 42” 5-1/2” One, 8” Offset Yes YesCOPWS-33 / 37 OPW 42” 4” Two, 16” O.C. No* (1) YesCOPWDS-33 / 37 OPW 42” 4” One, 8” Offset No* (1) YesCOPWQS-37 OPW 42” 4” Four, 16” O.C. No* (1) YesCCNIS-33 /37 C N I 42” 5-1/2” Two, 16” O.C. CNI* (2) YesCCNIDS-33 / 37 C N I 42” 5-1/2” One, 8” Offset CNI* (2) YesCTS-33 All*(3) - 3” None *(3) NoCTS-37 All*(4) - 3” None *(4) No7*(1) For OPW Manufacture Spill Buckets, each Spill Bucket Requires:OPW Part No: D02575M Shroud BootH15188M Lower Clamp for Shroud BootH15190M Upper Clamp for Shroud Boot*(2) CNI Provides the Spill Bucket Reducer.*(3) For CNI a min. 42” I.D. man hole / For OPW a min. 42” man hole / For PhilTite a 36” man hole. All other Manufacturers must accommodate amin. 38” I.D. man hole Skirt, and 35” Mounting Ring Opening.*(4) All other Manufacturers must accommodate a min. 41” M.H. Skirt,and 39” Mounting Ring Opening.