Build Servers

Intel ® Server Chassis SR14751U rack-optimized chassis for high-performance solutions in high-density clustersIntel ® Server ChassisConfigurationChassis Order Code 1Spares Kit Order CodeForm FactorIntel ® Server Board Support 2Drive BaysHot-Swap Disk Drive BayOrder CodeSystem CoolingPower SupplyRedundant-Power CapableTool-less FeaturesDimensions (H x W x D)Bezel FeaturesFront Connectors1. North American power cord included in order codes ending in NA; power cordnot included in all other order codes.2. Visit http://support.intel.com/support/motherboards/server for current detailson server boards supported by each chassis.Not applicableSR1475SR1475NA1U Electrical Spare Kit: ADW1UEESPRKIT1U Mechanical Spare Kit: ADW1UCHSPRKIT1U rackIntel ® Server Board SE7230NH1-EThree hot-swap SATA drivesOptional slimline CD/DVD or floppySATA Backplane Kit: A1475SATAKITFixed Drive Kit: AFIXDRVKITSupports five system fans plus two power-supply fans500 WNoCooling fan replacement, front panel, cable management arm, PCI-X and PCI Express*risers, PCI assembly, PCI retention, CD and floppy, hot-swap disk drives, and rack slide rails1.7" x 16.9" x 26.5" (43 mm x 429 mm x 673 mm)Front Panel: AXXRACKFP2 x USB, 1 x Serial3. The six-drive bay is standard on SC5300BASE and SC5300LX. The four-drive bay isavailable as an optional accessory. Floppy-disk drive installation kit included with chassis.4. Installation of hot-swap drive bay upgrade will decrease the number of fixeddrives supported by this chassis.5. Fully redundant power configuration requires second power module,order code FXX730WPSU.6. Fully redundant power configuration requires second power module,order code ADR700WPSU.84