Eopa 3D® artErial CannulaE - Find your ideal - Medtronic

select 3D ® 

EOPA 3D ® 

ArtEriAl CAnnulAE 

Find your ideal.

EOPA 3D ® 


the EOPA 3D® arterial cannulae 

from medtronic feature a unique 

tapered tip configuration that 

diffuses the flow through multiple 

outlets. the elongated wirewound 

body provides versatility for either 

minimally invasive procedures or 

traditional median sternotomy 

approaches. 

EOPA 3D 

without obturator 

EOPA 3D 

with obturator 

Pressure Loss (mm Hg) 

100 

80 

60 

40 

20 

Features Benefits 

■ Obturator ■ maintains hemostasis 

■ Hemostasis 

cap 

■ 3/8 in. vented ■ luer vent facilitates 

or non-vented de-airing after 

connector connection 

■ 13 in. length ■ Enables access to most 

(33.02 cm) areas of the aortic 

arch through median 

sternotomy or peristernotomy 

incisions 

■ thin wall ■ maximizes 

construction flow rates 

■ wirewound ■ Kink resistant, 

body maximizes flexibility 

■ 20 Fr & 22 Fr ■ selection of sizes 

sizes (6.7 mm 

& 7.3 mm) 

■ Adjustable ■ Allows pre-setting of 

radiopaque insertion depth and 

suture ring location for ligiture sutures 

■ Depth marks ■ indicates insertion 

depth at 1 cm intervals 

■ 3D diffusion tip ■ Additional outlets 

for reduced velocity 

diffuse flow 

EOPA 3D Arterial Cannulae 


during insertion and 

cannula priming 

20 FR 

22 FR 

0 

0 1 2 3 4 

Flow Rate (L/min. of water) 

5 6

EOPA 3D ® 


lAsEr DOPPlEr AnEmOmEtry 

(lDA) PErFOrmAnCE †† 

Comparison of flow velocity for 22 Fr EOPA 3D® arterial 

cannulae compared to terumo®-sarns straight tip 

extended body soft-Flow® and Edwards rmi straight 

tip EZ Glide 24 Fr (8 mm). 

EOPA 3D ® – 78222 – 22 Fr 

Terumo ® -Sarns Soft-Flow – 4950 – 24 Fr – 8mm 

Edwards RMI EZ Glide – EZS24A – 24 Fr – 12mm 

†† Data on file at medtronic, inc. 

FlOw PErFOrmAnCE 

vs. COmPEtitOrs 

the EOPA 3D® arterial cannulae exhibit superior flow 

performance. * typically, lower pressure drop is observed 

with larger Fr size cannulae due to larger internal 

diameter and therefore, less flow restriction. However, 

the 3D tip design performs better than traditional open 

tip arterial cannulae and competitive diffuse flow arterial 

cannulae. this improved flow 100 performance is 18 FR achieved 

20 FR 

by the design of the 3D tip 80 providing open central 22 as FR 

well as diverted flow streams. 60 


these flow charts show the improved flow performance 

20 

of the EOPA 3D compared to competitors’ elongated or 

0 

0 1 2 3 4 5 6 

extended body straight tip diffuse Flow flow Rate (L/min. arterial of water) models: 

Both 20 Fr and 22 

Fr EOPA 3D cannulae 

have lower pressure 

drops than 21 Fr and 24 

Fr competitors models.* 

Both 20 Fr and 22 Fr 

EOPA 3D cannulae 

have lower pressure 

drops than 24 Fr Estech 

EasyFlow cannulae.* 

Important Safety Information 

Care and caution should be taken to avoid damage to vessels and cardiac tissue during cannulation or other cardiac surgery 

procedures. For a listing of indications, contraindications, precautions and warnings, please refer to the Instructions for Use. 

Caution: Federal law (USA) restricts this device to sale by or on the order of a physician. 

Pressure Pressure Loss Loss (mm (mm Hg) Hg) 

180 

160 

140 

120 

Estech 

#103-300 

24 FR 

100 

MDT 

#78320 

80 

20 FR 

60 

MDT 

#78322 

40 

20 

0 

22 FR 

0 1 2 3 4 


5 6 


40 

EOPA 3D arterial cannulae vs. 

Estech EasyFlow 

24 FR 


Terumo Sarns Soft-Flow Extended 

100 

180 

18 FR 

20 FR 

160 80 

140 

120 60 

22 FR 

Sarns 

#4949 

7.0mm (21 FR) 

24 FR 

100 

80 40 

60 

20 

40 

MDT 

#78320 

20 FR 

Sarns 

#4950 

8.0mm (24 FR) 

MDT 

#78322 

22 FR 

20 

0 

0 0 

0 

1 

1 

2 3 4 

Flow 2 Rate (L/min. 3 of water) 4 


5 

5 

6 

6 

180 

160 

Edwards 

140 

120 

#EZS21TA 

21 FR 

100 

MDT 

#78320 

20 FR 

80 

60 

40 

20 

0 

Edwards 

#EZS24TA 

24 FR 

MDT 

#78322 

22 FR 

0 1 2 3 4 


5 6 



Edwards RMI EZ Glide Straight Tip 

*Data on file at medtronic, inc.

select 3D ® and select 3D ® ii 


the slight angle of the 3D tip diverted 

flows, along with the open tip flow, 

create a more centralized 

pattern within the aorta. 

the select 3D® and select 3D® ii arterial 

cannulae from medtronic feature a tip 

configuration that diffuses the flow 

through multiple outlets. this unique 

tip design provides reduced velocity 

with one central and three diverted 

flow streams. 

select 

3D 

Cannula 

select 

3D ii 

Cannula 

Features 

■ Peel away cap 

■ 3/8 in. vented 

or non-vented 

connector 

■ thin wall 

construction 

■ wirewound 

body 

■ stop collar 

■ 3D diffusion tip 





Benefits 

■ Allows complete 

priming of 

cannula and 

connector 

■ luer vent 

facilitates 

de-airing after 

connection 

■ maximizes 

flow rates 

■ Kink resistant, 

maximizes flexibility 

■ location for securing 

ligature sutures 

■ Additional outlets 

for reduced velocity 

diffuse flow

select 3D ® and select 3D ® ii 


lAsEr DOPPlEr AnEmOmEtry 

(lDA) PErFOrmAnCE † 

laser doppler anemometry testing demonstrates that 

the select 3D® arterial cannula features significantly 

reduced velocity compared to a standard open 

tip arterial cannula while also maintaining a more 

centralized flow pattern compared to competitive 

diffuse flow arterial cannulae. 

Comparison of flow velocity for 24 Fr arterial cannulae 

at 6 lPm. velocity measurements at 12mm from 

cannula tip for the select 3D (diffuse flow), a standard 

open tip angled (non-diffuse flow), terumo®-sarns 

angled soft-Flow® (diffuse flow). 

Medtronic-DLP 78624 – 24 Fr 

Medtronic-DLP 72524 – 24 Fr 

Terumo ® -Sarns Soft-Flow - 5768 – 24 Fr - 8 mm 

† Data on file at medtronic, inc. 

FlOw PErFOrmAnCE 

COmPArisOn 

Select 3D and Select 3D II Arterial Cannulae 


100 

80 

60 

40 

20 

18 FR 

20 FR 

22 FR 

24 FR 

0 

0 1 2 3 4 


5 6 

the unique design of the 3D arterial cannulae 

tip results in lower arterial line pressures than 

a conventional open tip arterial cannula or 

competitive diffuse flow arterial cannula. 

Line Pressure (mm of Hg) 

Average Line Pressure – 24 Fr Arterial Cannulae 

Average Line Pressure – 24 Fr Arterial Cannula 

(Closed Circuit Using Blood) 

250 

200 

150 

100 

50 

0 

112.20 

Select 3D 

24 Fr Angled 

(Medtronic- 

DLP 78624) 

(Closed Circuit Using Blood) 

127.73 

Open Tip 

24 Fr Curved 

(Medtronic- 

DLP 83024) 

156.47 

Soft-�ow® 

24 Fr Angled 

Terumo®-Sarns 

5768 

laboratory comparison of arterial line pressures at 6 liters 

per minute* 

*Data on file at medtronic, inc.

Ordering information 

Select 3D® Cannulae 

Dip-molded tip and Body 

Vented 

Product Number Description Quantity 

78618 18 Fr w/3/8 in. connector 20/carton 




Select 3D®II Cannulae 

injection-molded tip and Dip-molded Body 

Vented 





EOPA 3D® Cannulae 

Diffusion tip and Elongated Body 

Vented 




Also available with Carmeda® BioActive Surface. Manufactured under license from Carmeda AB, Sweden. Carmeda is a registered trademark of Carmeda AB. 

Carmeda Bonded models may be ordered using “CB” as a prefix to the product number. 

trademarks may be registered and are the property of their respective owners. 

EasyFlow is a trademark of Estech. Edwards and EZ Glide are trademarks of Edwards lifesciences Corporation. 

terumo is a registered trademark of terumo Corporation. sarns is a trademark of terumo Cardiovascular systems Corporation. 

soft-Flow is a registered trademark of terumo Cardiovascular systems Corporation. 

For more information, contact your local medtronic Cannula Products representative. u.s. Customer service: 1-800-328-1357. 

www.medtronic.com 

World Headquarters 

Medtronic, Inc. 

710 Medtronic Parkway 

Minneapolis, MN 55432-5604 

USA 

Tel: (763) 514-4000 

Fax: (763) 514-4879 

Medtronic USA, Inc. 

Toll-free: 1 (800) 328-2518 

Europe 

Medtronic International Trading Sàrl 

Route du Molliau 31 

Case postale 84 

CH-1131 Tolochenaz 

Switzerland 

Tel: 41.21.802.7000 

Fax: 41.21.802.7900 

Canada 

Medtronic of Canada Ltd. 

99 Hereford Street 

Brampton, Ontario L6Y 0R3 

Canada 

Tel: (905) 460-3800 

Fax: (905) 826-6620 

Toll-free: 1 (800) 268-5346 

Non-Vented 






Non-Vented 





Non-Vented 








Asia 

Medtronic International Ltd. 

49 Changi South Avenue 2 

Nasaco Tech Centre 

Singapore 486056 

Singapore 

Tel: (65) 6436 5000 

Fax: (65) 6776 6335 

Latin America 

Medtronic USA, Inc. 

Doral Corporate Center II 

3750 NW 87th Avenue Suite 700 

Miami, FL 33178 

USA 

Tel: (305) 500-9328 

Fax: (786) 709-4244 

LifeLine 

CardioVascular Technical Support 

Tel: (877) 526-7890 

Tel: (763) 526-7890 

Fax: (763) 526-7888 

E-mail: rs.cstechsupport@medtronic.com 

uC20110XXXX uC200701639b En En © © medtronic, 2012 medtronic, inc. 2011. inc. All rights reserved. Printed in usA

Eopa 3D® artErial CannulaE - Find your ideal - Medtronic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?