Canty - Liquidyne

CANTYPROCESS TECHNOLOGYHYL SERIES 50W, 80W Nickel Plated Sanitary Fiber Optic Flex Bundle Lighting SystemsHOW IT WORKSCanty fiber optic lighting systems have been designed toprovide efficient, high output tungsten-halogen light in a costeffective package. Conventional methods of lighting through asightglass are ineffective since a majority of the light is reflectedoff of the sightglass. Canty uses only high quality, flexible fiberoptic light pipes to fiber-optically guide the light from our lightsource through a sightglass or process connection. The light iselliptically focused into the fiber optic light pipe and guidedthrough the sightglass, minimizing losses while maximizing yourtank or vessel lighting!LIGHTING PACKAGESOur flexible bundle lighting systems are available with avariety of high quality Canty lights and process connections. Weoffer both weather proof and explosion proof/flame proof lightswith a variety of power supply options and mounting connectionsto meet all of your process needs.Our flexible bundle lighting systems are designed towork with any sightglass, whether it’s your existing sightglass ora Canty safety Fuseview sightglass. We offer many standardsightglass mounting connections to easily illuminate one, two orthree sightglasses using only one Canty light.Model Recommendation50 W - Typical tank diameter 8 ft. [2.4m], max. depth12 ft.[3.7m]80 W - Typical tank diameter 25 ft. [7.6m], max. depth70 ft.[21.3m]RIGIDSECTION3.27[83 mm]Ø.75[19 mm]4.27[108 mm]CANTYR1.38[35 mm]FLEXIBLE SECTIONØ5.50[140 mm]REMOTE MOUNTEDLIGHTTypical Remote Mounted Light Bundles >= 24”SPECIFICATIONSFiber Optic BundleConstruction: Multi-fiber glass bundleExterior: Crush resistant outer tubingTermination: Stainless steel, .75” diameterConfiguration: Single, two or three leg bundlesare availableLengths: 12” - 108” lengths are available.Consult factory for additional sizes.Lighting Systems• 50W and 80W lights are available to cover all yourprocess requirements• Weather proof, explosion proof, flameproof, and IP66models are available• Various models are FM approved, CSA approved andapproved to CENELEC standards• Canty offers a variety of power supplies to best suit theneeds of your applicationMOUNTING CONNECTIONS• Sightglass mount-universal mounting bracket isdesigned to function with any flange mountedsightglass. Standard brackets are constructed ofaluminum or SS.• NPT mounting connection - flexible bundle may connectto vessel using a 1” NPT threaded connection. Availablein CS, SS or Hastelloy ® or equal or glass wettedmaterials• Tri-Clamp ® -sanitary vessel connection. Ideal forpharmaceutical or food grade applicationsFEATURES• Nickel Plated Aluminum Light Enclosures• Flexible fiber optic light bundle provides a high intensitylight output• NEMA 4, IP66, Explosion proof (Class 1, Div. 1, GroupsB, C & D, Class II, Div. 1, Groups E, F & G) orFlameproof Eex d IIC T6 ratings• Fused glass seal provides a safe, reliable, hermetic sealbetween electronics and the process area• Various models feature FM, CSA, approval to CENELECstandards• Canty lights provide the maximum illumination possible• Cool light output - there is no product bake-onRIGID TUBINGSUPPORTS LIGHT6.88[175 mm]Ø.75[19 mm]4.33[110 mm]R3.00[76 mm]11.86[301 mm]RIGID MOUNTTypical 12” Direct Mount Light Bundle ModelsJM Canty Inc Buffalo, NY USA Ph: (716) 625 4227 Fax: (716) 625 4228JM Canty Intl Ltd Dublin, Ireland Ph: + 353 (01) 882 9621 Fax: +353 (01) 882 9622www.jmcanty.comDocument P/N: TA10836-1 Rev. 09.63[244 mm]

Process LightsWeather Proof / IPNLNRNBN9NMN1- 50 W. Integral 120VTransformer. (WP)- 50 W. Integral 230VTransformer. (IP)- 80 W. Separate PSU. (WP)- 80 W. Separate PSU. (IP)- 80 W Toroidal. Integral120V Transformer. (WP)- 80 W Toroidal. Integral230V Transformer. (IP)Ordering InformationHOW TO ORDER: Select the appropriate symbols and build a part number as shown:EXAMPLE:LIGHT SOURCE SELECTIONExplosion proof / Flame proofNN - 50 W Light. Separate PSU. (EXP)NG - 50 W Light. Separate PSU. (FP)NC - 50 W Light. Integral 120VTransformer (EXP)NT - 50 W Light. Integral 230VTransformer (FP)ND - 80 W. Separate PSU. (EXP)N6 - 80 W. Separate PSU. (FP)HM - 80 W Toroidal. Integral120V Transformer (EXP)EA - 80 W Toroidal. Integral230V Transformer (FP)H M U 7 2 SBUNDLE SHEATHING MATERIALS = 304 SS SheathingP = Polyolefin Sheathing Over 304 SSSee note 4.BUNDLE LENGTH0 - 12” Rigid Bundle1 - 24” Flex Bundle2 - 36” Flex Bundle3 - 48” Flex Bundle4 - 60” Flex Bundle5 - 72” Flex Bundle8 - 96” Flex BundleA - 120” Flex BundleC - 144” Flex BundleBUNDLE SELECTION7 - Single Leg Bundle with one 90° Bend at End.205° C Max at Tip.POWER SUPPLIESWeather proof Light /IP Models(NL/NR) 50 Watt WP/IP Lights with Integral TransformerU - Customer supplies ON/OFF switch.(NB/N9) 80 Watt WP/IP Lights w/Separate PSU8 - Base mounted transformer/timer assembly (120V).Y - Base mounted transformer/timer assembly (230V).9 - Base mounted assembly in WP enclosure with switch.User supplies 120V AC (WP Models) or 230V AC (IP Models).0 - Bare transformer. User supplies 120V AC (WP Models) or 230VAC (IP Models).(NM/N1) 80 Watt Toroidal WP/IP Lights w/ Integral TransformerU - Customer supplies ON/OFF switch.J - Includes switch mounted in WP enclosure (120V).P - Includes switch mounted in IP enclosure (230V).POWER SUPPLIESExplosion proof / Flame proof Light Models(NN/NG) 50 Watt EXP/FP Lights w/ Separate PSUN - Bare transformer. User supplies 120V AC (EXP Models)or 230V AC (FP Models).H - No power supply. User supplies 12V AC or 12V DC,50W (min.) source.(NC/NT) 50 Watt EXP/FP Lights with Integral TransformerU - Customer supplies ON/OFF switch.(ND/N6) 80 Watt EXP/FP Lights w/ Separate PSUJ - PSU in EXP encl. w/switch.User supplies 120V ACM - Base mounted transformer/timer assembly(120V).O - Base mounted transformer/timer assembly(230V).N - Bare transformer. User supplies 120V AC (EXP Models)or 230V AC (FP Models).(HM/EA) 80 Watt Toroidal EXP/FP Lights w/Integral Trans.U - Customer supplies ON/OFF switch.Mounting Brackets - Required to Mount Light to New or Existing Sight Glass.12” Fiber Optic Bundle Bracket OptionsLC4305-33 2” - 8”, 150 # ANSI Sight Glass Mt.24” and Larger Fiber Optic Bundle Bracket OptionsLC4305-60 Universal Flanged Sight Glass Mt. Bkt.LC4305-42 2” - 6” Canty Tri-Clamp ® Sight Glasses,3” - 8” Flush Canty Tri-Clamp ® Sight GlassesConsult factory for additional models.Notes :1) Vessel lighting diameter, depth specifications provided are a general guideline forstainless steel tanks with 30° normal beam conical light output option. For blue glass linedreactors, which will absorb visible wavelengths of light, a derating factor of 0.7 is recommended.2) All Explosion Proof lights are rated for use in Class I, Div. 1, Groups B, C and D, Class II,Div. 1, Groups E, F & G as well as NEMA 4 locations. Power supply ratings vary with model.3) All Flame Proof lights are approved for use in EExd II C T6 and IP 66 locations.4) For all models, bundle end fittings are 304L SS for light collector, emitter.CANTYwww.jmcanty.comDocument P/N: TA10836-1 Rev. 0JM Canty Inc | Buffalo, NY USA | Ph: (716) 625 4227 | Fax: (716) 625 4228JM Canty Intl Ltd | Dublin, Ireland | Ph: + 353 (01) 882 9621 | Fax: +353 (01) 882 9622Tri-clamp ® is a registered trademark of Alfa Laval Inc.