Action! - GAMECO

Squeeze Valves, Needle Valves, Ball Valve and HandleV-880 PH-1 – Squeeze Valve with Adjustable Pilot & Torch Handle KitThe Red Dragon V-880 PH-1 allows you to add a squeeze valveand handle to any Red Dragon Vapor Torch Kit. Perfect forthose who use a Red Dragon Torch Kit for spot weeding andinstances where full flame is not continuously required. This kitwill quickly pay for itself in propane savings if this is how youwill primarily use the torch kit. The all-brass squeeze valve hasan adjustable pilot feature. The adjustable pilot is a needle valveassembly similar to the Red Dragon V-334.This is a highpressure valve tested to 350 lbs working pressure.Use Pipe Thread Compound or Teflon® Tape at all connectionsand follow all instructions included with your torch kit.Order SKU # Wt Each Case QtyV-880 PH-1 0.5 lbs 10V-6591 – Squeeze Valve V-314 – Squeeze ValveOrder SKU # Wt Each Case QtyV-6591 0.2 lbs 10V-880 P – Valve Repair Kits & Lever AssemblyTJP-123 – Pilot Valve Repair KitA brass-bodied valve thatprovides positive shut-off for anyof the Red Dragon torches. Thetrigger must be depressed forany fuel to flow. This provides anadded safety feature whereneeded. Inlet and outlet are 1/4”pipe thread. For use on all liquidand vapor Red Dragon torches.TSTE 131-2 – Lever AssemblyTorchHandleCouplerSqueezeValveV-334 – Needle ValveHandleHoseAssemblyA replacement squeeze valve forRed Dragon Jet Torches.Order SKU # Wt Each Case QtyV-314 0.5 lbs 1This heavy-duty needle valve has beentested in excess of 350 lbs. and incorporatesa thumb wheel for easy open or close. Bothinlet (female end) and outlet (male end) are1/4” standard pipe thread.PARTS & ACCESSORIESOrder SKU # Wt Each Case QtyV-334 0.25 lbs 10These three kits will allow you to repair either the pilot valve, themain valve or the lever assembly on any V-880 P Squeeze Valve.Order SKU # Description Wt Each Case QtyTJP-123 Pilot Valve Repair Kit 0.1 lbs 1TC-42-7 Main Valve Repair Kit 0.1 lbs 1TSTE 131-2 Lever Assembly 0.1 lbs 1H-1 – Torch HandleTC-42-7 – Main Valve Repair KitV-3055 – Needle ValveA less expensive needle valve for use withLP-gas, air or water and other fluids. Bothinlet (female end) and outlet (male end) are1/4” standard pipe thread. This replaces theold V-3055 P needle valve with “T” handle.Order SKU # Wt Each Case QtyV-3055 0.2 lbs 10V-326 – 1/4” MPT x 1/4” FPT Inlet Ball ValveA replacement handle for Red Dragon Torches with squeezevalves. A must if you want to add a squeeze valve to atorch. 1/4” male pipe thread x 1/4” female pipe thread.Order SKU # Wt Each Case QtyH-1 0.25 lbs 10This 1/4 turn, single directionflow ball valve has a maximum operatingtemp of 180° F. Features a plated metalhandle and plated brass ball with a Teflonseat and Buna-N seals. Approved forNatural and LP Gas. Used on Red DragonConstruction heaters.Order SKU # Wt Each Case QtyV-326 0.25 lbs 10Questions? Please feel free to contact us at 1-800-255-2469. One of our customerservice representatives will be glad to help you.FLAME ENGINEERING, INC. • P.O. Box 577 • West Highway 4 • LaCrosse, KS 67548800-255-2469 • 785-222-2873 • FAX: 785-222-3619 • www.FlameEngineering.com39