Action! - GAMECO

LP Hose Assemblies, P.O.L. Fittings & Cylinder ConnectorsHP-Series LP-Gas Hose – Liquid or VaporHP-series hose is U.L. Listed foruse with either vapor or liquid LPgasand is available in 5’, 10’, 25’and 50’ lengths. Each hose isU.L. Listedcoupled with 1/4” male pipe threadfittings on both ends*. Maximumworking pressure of this hose is350 PSI with a burst test of 1750PSI. Hose I.D. is 1/4”. A 1/4”female brass coupling is includedwith each hose.*HP-10 C comes with one female end and one male end.Order SKU # Description Wt Each Case QtyHP-5 5’ Hose w/1/4” MPT on both ends 1.0 lbs 10HP-5C 5’ Hose w/1/4” MPT & 1/4”FPT 1.0 lbs 10HP-10 10’ Hose w/1/4” MPT on both ends 1.5 lbs 10HP-10 C 10’ Hose w/1/4” MPT & 1/4”FPT 1.5 lbs 10HP-25 25’ Hose w/1/4” MPT on both ends 4.0 lbs 6HP-50 50’ Hose w/1/4” MPT on both ends 6.1 lbs 4SL-1C – Propane Hook-up Kit - Vapor OnlyThis kit provides the connecting link between LP cylinder and a lowpressure appliance such as a stock tank heater, gas grill, Patio Light, RVand more. Not for use on torches or any high pressure equipment.SL-1C Hook-up Kit Includes:Part No. DescriptionP-3200W Excess Flow P.O.L. Attaches kit to LP cylinderRSL-1 11” WC (Approx 1/2 PSI) Regulator. Maintains constant, correct pressureSL-1C* 10’ Hose 3/8” Flare swivel end attaches to most grills and otherappliances designed to operate at 11” WC.Pipe Thread SealantOrder SKU # Wt Each Case QtySL-1C 2.2 lbs 10SL-32C – Propane Hook-up Kit - Vapor OnlyUse the SL-32C Hose Kitto connect the MiniDragon Torch Kit to alarger, refillable cylinder.Works great with anyother appliances such aslanterns, camp stovesetc, that normally usestandard 1 lb. cylinders.SL-1C Hook-up Kit Includes:Part No. DescriptionP-3200W U.L. Listed Excess Flow P.O.L. Attaches kit to LP cylinderF-140 Cylinder Adaptor attaches to applianceHP-10T 10’ U.L. Listed LP Gas HoseP-1685 – Standard P.O.LThe fitting that adapts most LP cylindersto regulators and other fittings. The P.O.L.nut is the left hand fitting that threads intonearly all butane/propane cylinders andthe other end of this connection is standard 1/4” male pipethread.This is a straight through flow design - No excess flowsafety device installed in this P.O.L.Order SKU # Wt Each Case QtyP-1685 0.2 lbs 10P-3200 W – Excess Flow P.O.L.A soft-nose P.O.L. connector incorporatingan excess flow safety device and hex nutfor positive tightening. The outlet on thisfitting is 1/4” male pipe thread. Flow rate is1.8 gallons per minute.Order SKU # Wt Each Case QtyP-3200 W 0.2 lbs 10P-W 795 – Hand Tighten Excess Flow P.O.L.No wrenches needed with this softnose P.O.L. This all-brass P.O.L. can behand-tightened for easy connection toany LP-gas cylinder. Includes excessflow device for added safety. Outlet is1/4” male pipe thread. Flow rate is 1.8gallons per minute.Order SKU # Wt Each Case QtyP-W 795 0.3 lbs 10Replacement O Rings for P.O.L. FittingsReplacement O ring seals for P-1685, P-3200 W and P-W 795 P.O.L.fittings shown above.Order SKU # Case Wt Case Qty100-303-080 0.2 lbs 100TYPE1-GR – Cylinder ConnectorThis TYPE I ACME appliance fitting (1-5/16 ACME X 1/4 MPT) is a wrenchless,user friendly, right hand connector.Features a thermally sensitive sleeve andexcess flow device. 200,000 BTU/HRmax output.Order SKU # Wt Each Case QtyTYPE1-GR 0.3 lbs 10TYPE1-BL – Cylinder ConnectorThis TYPE 1 ACME appliance fitting is awrenchless, user friendly, right hand connector.Features a thermally sensitivesleeve and excess flow device. Max outputis 70,000 BTU/hr. Use to connect LP-Cylinders to regulators, hoses and otherfittings. Perfect for use with gas grills andother low pressure devices.U.L. ListedU.L. ListedU.L. ListedU.L. ListedU.L. ListedPARTS & ACCESSORIESOrder SKU # Wt Each Case QtySL-32C 2.0 lbs 10Order SKU # Wt Each Case QtyTYPE1-BL 0.3 lbs 10FLAME ENGINEERING, INC. • P.O. Box 577 • West Highway 4 • LaCrosse, KS 67548800-255-2469 • 785-222-2873 • FAX: 785-222-3619 • www.FlameEngineering.com41