Safety gloves - UVEX SAFETY

Xtra Grip TechnologySecure grip. Excellent flexibility.Whether it’s in sports, in technical environments or behind thewheel, a powerful grip is essential in many applications. Without itthe risk of an accident increases and energy is lost, particularly inwet or oily environments. This applies especially to safety gloves,as a weak grip leads to hand fatigue, increasing the potential riskof injury.With the innovative uvex Profas Xtra grip technology, these problemsare a thing of the past.Multilayer design for greater safetySpecial coating for a moresecure gripDurable nitrile coatingCotton stockinet for realcomfortSurface of skinThe highly absorbent cotton lining of the Xtra grip technology gloves ensuresexceptional comfort, whilst the addition of a nitrile coating provides absoluteimpermeability.uvex Profas RUBIFLEX XG 35Buvex provides maximum chemical protection with thesupported RUBIFLEX XG 35B.Greater resistancetimeTogether with the multilayer design,the advanced surface structure ensuresa greater resistance time.Use in oily and wetenvironmentsThe canal structure of the Xtra griptechnology gloves absorbs liquids,helping maintain a secure grip on toolsand components.112

Greater resistance time. Exceptional comfort.Xtra Grip technology – providing exceptional grip in wet and oily environments.*Product shown in illustration is not available in Australia and New Zealand.113

Mechanical risksKnitted safety glovesUNIGRIP · UNILITE · UNIPURUNILITEKnitted safety glove withmicroporous nitrile foam coating.It fits like a second skin, enablingeven small objects to be handledwith precision.Characteristics• extremely light weight• outstanding dexterity right tothe fingertips• excellent mechanical abrasionresistance• microporous foam coating• excellent grip on dry and(slightly) moist objects dueto nitrile foam• exceptional wearer comfortdue to the airflow allowed bythe foam coatApplications• fine assembly work• sorting• inspection/finishing• light manual handling• maintenancePart no. UL6600EN 388 (4 1 2 1)Sizes 6, 7, 8, 9, 10Length approx. 22 - 27 cmConstruction Five-finger glove,knitted cuff, palm andfingertip with microporousnitrile coatingBase glove Knitted nylonCoating NBR (nitrile rubber), foamedColour white/greyResistance dry and slightly moist areasUNIGRIP · Knitted safety glove with crinkle latex coatingThis high-quality knitted safetyglove features excellent gripcapabilities and is suitablefor general mechanical riskapplications. It offers flexibilityand an excellent fit.Characteristics• outstanding dexterity• Latex coated palm and fingertipsfor excellent grip• mechanical strength• extremely lightweight• flexible• good abrasion resistanceApplications• fine assembly work• precision work• construction industry• warehousing• horticulture industryPart no. UG6629EN 388 (2 1 2 1)Sizes 6, 7, 8, 9, 10Length approx. 22 - 27 cmConstruction 13 gauge knit, palmand fingertip coatedBase glove NylonCoating crinkle latexColour blueEN 3882121UNIPURThese safety gloves are ultra light,flexible and provide outstandingdexterity. The palms and fingertipsare coated with NBR (UP6634) orPolyurethane (UP6631).Applications• fine assembly work• precision work• automotive industry• construction industryCharacteristics• ultra lightweight• outstanding dexterity• good grip in wet conditions• flexible• exceptional abrasion resistance• mechanical strength• silicone free (UP6634)EN 388EN 388Part no. UP6634 UP6631EN 388 (4 1 3 3) 388 (4 1 4 1)Sizes 7, 8, 9, 10 7, 8, 9, 10Length approx. 22 - 27 cm 22 - 27 cmConstruction Five-finger glove, ribbing, palmand fingertip with NBR coatingFive-finger glove, knitted cuff, palmand fingertip with PU coatingBase glove Knitted nylon Knitted nylonCoating NBR (nitrile butadiene rubber) PolyurethaneColour grey/black grey / greyResistance oil and grease resistant dry and slightly moist areas41334141115

helix C3 & C5High performance coating technologiestechnologyuvex PROFAS grip technologiesuvex has developed innovative materials for the newhelix range of cut protection safety gloves.Three unique coating materials are used across thehelix range:High Performance Elastomer (HPE) SoftGrip® FoamThe HPE SoftGrip Foam guarantees a steady grip when used indry and slightly oily conditions. This microporous coating isbreathable, providing a stable internal climate and a high degreeof comfort.• used in helix C3/C5 foamHigh Performance Elastomer (HPE) coatingThe liquid-resistant HPE coating ensures suitability forapplications in very wet or oily environments. With its extendedcoating coverage, the helix wet plus provides increasedliquid protection.They also perform strongly in dry applications due to theirexcellent abrasion resistance.• used in helix C3/C5 wet and wet plus, and helix C3 carbonHigh Performance Vinyl (HPV) micro-nubsThe High Performance Vinyl (HPV) micro-nubs are the latest uvexProfas grip technology in the helix range.An innovative anatomical nub design with flexzones enablesexceptional grip right down to the fingertips, making precisionwork easier than ever.The HPV enables outstanding performance, temperatureregulation, breathability and flexibility in dry applications.• used in helix C3/C5 dry117

Mechanical risksCut protection safety gloves withBamboo TwinFlex ® technology · HELIXhelix C5Characteristics• uvex Profas Bamboo TwinFlex ®technology• innovative SoftGrip coating• exceptional cut protection (Cut 5)• high wearer comfort due touvex climazone• outstanding dexterity• exceptional abrasion resistance• flexible• silicone-free on the basis of thefingerprint test• certified according to Oeko-TexStandard 100Applications• metal industry• automobile industry• transportation work• assembly work• glass industry• maintenance and repair• shipping/logistics• brewery/beverage industry• paper industry• constructionEN 388EN 388EN 388454245424542helix C5 wetPart no. helix C5 wet(HX60492)helix C5 wet plus(HX60496)helix C5 foam(HX60494)EN 388 (4 5 4 2) 388 (4 5 4 2) 388 (4 5 4 2)Sizes 7, 8, 9, 10, 11 7, 8, 9, 10, 11 7, 8, 9, 10, 11Length approx. 27 cm 27 cm 27 cmConstructionBase gloveCoatingFive-finger glove,ribbing, palm andfingertips coatedBamboo-rayon/Dyneema ® /glass/polyamideHigh PerformanceFive-finger knitted glove,partially coated back ofhandBamboo-rayon/Dyneema ® /glass/polyamideHigh PerformanceFive-finger glove,ribbing, palm andfingertips coatedBamboo-rayon/Dyneema ® /glass/polyamideHigh Performance Elastomer(HPE), SoftGrip foamElastomer (HPE) wet Elastomer (HPE) wetColour lime/anthracite lime/anthracite lime/anthraciteResistance oil and grease resistant oil and grease resistant moisture resistantEN 388EN 388254X254X254Xhelix C5 wet plus helix C5 foam helix C5 dryhelix C5 sleevehelix C5 linerPart no. helix C5 dry(HX60499)helix C5 liner(HX60497)helix C5 sleeve(HX60491)EN 388 (2 5 4 X) 388 (2 5 4 X) 388 (2 5 4 X)Sizes 7, 8, 9, 10, 11 7, 8, 9, 10, 11 one size fits allLength approx. 27 cm 27 cm 40 cmConstruction Five-finger knitted glove,grip nubs on palmFive-finger knitted glove Forearm protection withvelcro fasteningBase gloveCoatingBamboo-rayon/Dyneema ® /glass/polyamideHigh-performance vinylBamboo-rayon/Dyneema ® /glass/polyamidenoneBamboo-rayon/Dyneema ® /glass/polyamidenone(HPV), grip nubsColour lime/anthracite lime limeResistance for dry areas underglove for dry areas118Bamboo TwinFlex ® technology is a registered brand of Profas GmbH & Co KG, Germany.Dyneema ® is a registered trademark of Royal DSM N.V.

Mechanical risksCut protection safety gloves withBamboo TwinFlex ® technology · HELIXhelix C3Characteristics• uvex Profas Bamboo TwinFlex ®technology• innovative SoftGrip coatings• extremely comfortable thanks touvex climazone• excellent dexterity• good cut protection (Cut 3)• exceptional abrasion resistance• flexible• silicone-free on the basis of thefingerprint test• certified according to Oeko-TexStandard 100Applications• automotive• engineering• aerospace• metal industry• maintenance• assembly• transport• construction• oil and gasEN 388EN 388EN 388helix C3 wethelix C3 carbonPart no. helix C3 wet(HX60542)helix C3 wet plus(HX60546)helix C3 carbon(HX60545)EN 388 (4 3 4 2) 388 (4 3 4 2) 388 (4 3 4 2)Sizes 7, 8, 9, 10, 11 7, 8, 9, 10, 11 7, 8, 9, 10, 11Length approx. 27 cm 27 cm 27 cmConstructionBase gloveCoating4342Five-finger knittedglove, coated palmand fingertipsBamboo viscose/Dyneema ® /glass/polyamideHigh PerformanceElastomer (HPE)Five-finger knitted glove,partially coated palm andextended on reverseBamboo viscose/ Dyneema ® /glass/polyamideHigh PerformanceElastomer (HPE)Five-finger knittedglove, coated palmand fingertipsBamboo viscose/Dyneema ® /glass/polyamide/CarbonHigh-performance elastomer(HPE) foam withcarbon nanotubes (CNT)Colour anthracite anthracite anthraciteResistance light liquid resistant light liquid resistant moisture resistant43424342EN 388EN 388EN 3884342234X234Xhelix C3 wet plus helix C3 foam helix C3 dryhelix C3 linerPart no. helix C3 foam(HX 60544)helix C3 dry(HX60549)helix C3 liner(HX60547)EN 388 (4 3 4 2) 388 (2 3 4 X)Sizes 7, 8, 9, 10, 11 7, 8, 9, 10, 11 7, 8, 9, 10, 11Length approx. 27 cm 27 cm 27cmConstructionBase gloveCoatingFive-finger knittedglove, coated palmand fingertipsBamboo viscose/Dyneema ® /glass/polyamideHigh PerformanceElastomer (HPE),SoftGrip-FoamFive-finger knittedglove, grip nubs onpalmBamboo viscose/Dyneema ® /glass/polyamideHigh Performance Vinyl(HPV) grip nubsFive-finger knitted gloveBamboo viscose/Dyneema ® /glass/polyamidenoneColour anthracite anthracite anthraciteResistance moisture resistant for use in dry areas undergloveBamboo TwinFlex ® technology is a registered brand of Profas GmbH & Co KG, Germany.Dyneema ® is a registered trademark of Royal DSM N.V.119

Mechanical risksCut protection safety gloves with multi-layer technologyNK rangeNK2724 - for oily applicationsThis high-quality NBR-coated safetyglove is exceptionally comfortableto wear. Thanks to its multilayertechnology cotton/Dyneema®/glass and its dual nitrile coating, itprovides excellent cut protection.The rough surface ensuresexceptional grip.Characteristics• anatomical shape• flexible• excellent cut protection• comfortable fit• excellent grip• good resistance to oilsApplications• sheet fabrication industry• machine and tool construction• all work with oil and high riskof cuts• tasks with extrememechanical stressEN 388NK 2724NBR impregnation forenhanced gripExcellent cut-resistantDyneema ® /glass/polyamideNitrile coating to protectagainst oils and fluidsCotton layer foroutstanding wearer comfortSkin surfaceNK2724B – for chemical applicationsThis high-quality NBR-coatedsafety glove is exceptionallycomfortable to wear. Thanksto cotton/Dyneema ® / glass multilayertechnology and the doublenitrile coating, it offers optimalcut resistance and chemicalresistance plus outstandingendurance. The rough surfaceensures exceptional grip.Characteristics• anatomical shape• flexible• excellent cut protection• comfortable fit• excellent grip• good resistance tomany chemicalsApplications• chemical industry• machine and tool construction• all work with high risk of cuts,or requiring chemical protectionPart no. NK2724EN 388 (3 4 4 2)Sizes 9, 10Length approx. 27 cmConstruction Five-finger glove, seamless coating, cuffBase glove Sandwich liner cotton interlock/Dyneema ® /glass/polyamideCoating Special NBR (nitrile butadiene rubber)Colour orangeResistance for dry applications3442EN 388EN 374Part no. NK2725BEN 388 (3 4 4 2), 374Sizes 9, 10Length approx. 27 cmConstruction Five-finger glove, seamless coating, cuffBase glove Sandwich liner cotton interlock/Dyneema ® /glass/polyamideCoating Special NBR (nitrile butadiene rubber)Colour blueResistance excellent resistance to grease, mineral oils and many chemicals3442A J KNK 2724BNBR impregnation forenhanced gripExcellent cut-resistantDyneema ® /glass/polyamideNitrile coating to protectagainst chemicalsCotton layer foroutstanding wearer comfortSkin surface120Dyneema ® is a registered trademark of Royal DSM N.V.Dyneema ® is a registered trademark of Royal DSM N.V.