Crimping pliers - Ambitex

Hole punches and accessoriesISO Plus punches and dies for stainless steel sheet• For cutting circular holes in mild and stainless steel sheet.• New punch geometry for longer life.• Operated by hydraulic driver 643743 (single position) or 986108 (dual position) or hydraulic pump and cylinder 985944.• Cuts holes quickly, and cleanly.• For all ISO diameters from M16 to M63.• Parts must be lubricated for correct operation.SPECIAL FEATURE : the blank is split into three parts and drops automatically at the end of the cutting operation.• Supplied with punch and die.FISO PLUSd ISO/enmmPilot holed/mmActuatingpinMax./thicknessStainlesssheet697469 M16 16,2 11,5 657547 2 mm697477 M20 20,4 11,5 657547 2 mm697506 M25 25,4 11,5 657547 2 mm697514 M32 32,5 22 986065 3 mm697522 M40 40,5 22 986065 3 mm697549 M50 50,5 22 986065 3 mm697531 M63 63,5 22 986065 3 mm Hydraulic hole punch equipment986108Hydraulic punch driverROTATING HEAD HYDRAULIC DRIVER !• Two operating positions.• Fast cutting, short piston stroke.• Demultiplication of effort for fast, easy working.Dual-position hand-operated hydraulic driver and accessories986052• Set supplied in a plastic box, comprising :- 986108 dual-position hand-operated hydraulic driver.- 986110 spacer ring no. 1.- 986111 spacer ring no .2.- 986064 actuating pin 9.5 mm.- 986065 actuating pin 19 mm.- 657539 actuating pin 6 mm.- 986051 drill bit (11 mm).• For cutting holes 12.5 to 63 mm diameter in sheet steel.• Cylinder force 7 kN.• Pressure 700 bars.• Piston stroke 20 mm.• Pressure limiter.D : 2.45 kg.www.facom.com 645