Crimping pliers - Ambitex

Accessories for hole punchesISO size step drill Ø 6.5 to 40.5 mm678006• For precision-drilling straight bores in all materials.• No pilot hole required.• Parallel shank with 3 flats for positive rotation.• Diameter identification markings.• 678014 : PG size step drill.• For drilling steel sheet up to 4 mm thick.• Shank diameter 10 mm.Hole punches and accessoriesF678006d min - maxmm6,5-8,5-10,5-12,5-16,5-20,5-25,5-29-32,5-36,5-40,5AmmLmmDg10 96 310PG size step drill Ø 6.5 to 40.5 mm678014• For precision-drilling straight bores in all materials.• No pilot hole required.• Parallel shank with 3 flats for positive rotation.• Diameter identification markings.• 678014 : PG size step drill.• For drilling steel sheet up to 4 mm thick.• Shank diameter 10 mm.F678014d min - maxmm6-9-12,5-15,2-18,6-20,4-22,5-26-28,3-30,5-34-37AmmLmmDg10 100 30011 mm diameter drill bit986051• Drill bit d 11 mm for drilling pilot holes.Lubricating paste986107• For lubricating screws and drive shafts.www.facom.com 647