3x3 unibox booth standards

2.52.51200x198 visible size3mm black corex facia panelstand number and exhibitor namevinyl cut lettering white2 x 150W Halogen square spotlightsmounted on in line stand side(note that energy effecient lights arebeing phased in as part of ourgreening efforts.)Note: Total stand height 2400mm199432Amp DB1 per four booths15Amp plug(SA)3x2 corner boothinternal stand size2964x196415Amp plug(SA)3x2 in-line boothinternal stand size2964x196415Amp plug(SA)3x2 corner boothinternal stand size2964x19643000 3000 3000Unibox booth sizes980 x 2316 PST 3mmwhite panelno drilling, painting, nailing allowed.self adhesive vinyl allowed500x500 square capet tiles2400wall mounted 32Amp DB1 for every 4 stands2000Unibox booths front elevationprofile size36 36profile size16.52635.5ua46964aluminiumfor exhibition and interior constructionprofiles15216 .5R 200four way profile uprights45 0Can be used to create Ø400mm columns along with UA5579 profileLength: 2400mm upright with 20mm adjustable footLength: 964.5mm wall, 2964.5mm faciaLength: 5.1mFinish: satin silver anodisedua6222Finish: satin silver anodisedaluminium profilesFinish: satin silver anodised16.535.5four way octant profile40050mm extra wide two-way profile beams16.550ua5650 ua484917aluminium profilesUnibox modular system details16.510026152152mm two way ”I“ beam profileØLength: 3964.5mmFinish: satin silver anodised(with feature holes) ua3553-fh5Note:-All lights and plugs are installed in standard positionsas indicated. Any change of position or removal oflights and/or plug points will carry an additional charge.-The electrical regulations stipulate one DB for everyfour stands. The DB will be fitted to the shell wall of oneof the four stands determined by the show layoutdemands. This DB can not be moved or altered.-plug points are centred to the back wall of the booth.-2 x 150W square Halogen lights are fitted to the top ofthe front fascia beam and approximately spaced witheven distribution over the length of the beam. Due togreening demands this will be phased out and bereplaced with low energy consumption fittings. Pleasebe aware that this might be the case with your booth.-the maximum loading per plug point is amp/500Watt.Should additional power be required, this has to beordered as an additional, possibly requiring a dedicatedDB which will be for the exhibitors account.3 x 2 Unibox booth standardspanel size980x2316visible size964x23008mm bleedall round forinsert intosystempanel size980x2316visible size964x23008mm bleedall round forinsert intosystemthese dimensionsindicate artwork sizes20 20980 980 9802980three panel wallpanel size980x2316visible size964x23008mm bleedall round forinsert intosystemNOTE: The dotted line indicates the Aluminium profile edge. The panel is insertedinto the aluminium profile which will cover 8mm from the edge of each panel to thetop, bottom and sides.A graphic layout to a 3 panel wall should be set out to a size of 2980x2316 taking into accountall the areas covered by the profiles as well as the vertical breaks in the panels indicated.A graphic layout to a 2 panel wall should be set out to a size of 1980x2316 taking into accountall the areas covered by the profiles as well as the vertical breaks in the panels indicated.Three and two panel back and side wall layout2316panel size980x2316visible size964x23008mm bleedall round forinsert intosystemthese dimensionsindicate artwork sizes980 980198020two panel wallpanel size980x2316visible size964x23008mm bleedall round forinsert intosystem3x2 Unibox booth standardsdrawn Paul Hugo 23 Oct 2009153.3x2 unibox shell.d1rev:1 Portside Rd Culemborg Cape Town www.scandisplay.co.za tel +27 21 409 1200 fax +27 21 421 4494NOTES: This design is copyright and remains the property of Scan Display. No duplication of this drawing or any part thereof, is allowed in any form, without the written permission of the designer. All dimensions and relevant details to be checked by production and pre-built prior to construction on site. All dimensions are given in mm. Any discrepancies are to be reported to the designer imme diately. No changes are to be made to this design without the approval of the designer. Colours and graphics are represented as close as possible but may differ from the actual finished product.

2.52.51200x198 visible size3mm black corex facia panelstand number and exhibitor namevinyl cut lettering white2 x 150W Halogen square spotlightsmounted on in line stand side(note that energy effecient lights arebeing phased in as part of ourgreening efforts.)Note: Total stand height 2400mm200032Amp DB1 per four booths15Amp plug(SA)2x2 corner boothinternal stand size1964x196415Amp plug(SA)2x2 in-line boothinternal stand size1964x196415Amp plug(SA)2x2 corner boothinternal stand size1964x19642000 2000 2000Unibox booth sizes980 x 2316 PST 3mmwhite panelNo drilling, painting, nailing allowed.Self adhesive vinyl allowed.500x500 square capet tiles2400wall mounted 32Amp DB1 for every 4 stands2000Unibox booths front elevationprofile size3616.52635.5ua46964aluminiumfor exhibition and interior constructionprofiles15216 .5R 20045 016.5four way profile uprightsfour way octant profile50mm extra wide two-way profile beamsCan be used to create Ø400mm columns along with UA5579 profileLength: 2400mm upright with 20mm adjustable footLength: 964.5mm wall, 2964.5mm faciaLength: 5.1mFinish: satin silver anodisedua6222Finish: satin silver anodisedaluminium profilesFinish: satin silver anodised35.540016.550ua5650 ua48491716.526100152aluminium profiles152mm two way ”I“ beam profileØLength: 3964.5mmFinish: satin silver anodised(with feature holes) ua3553-fh5Note:-All lights and plugs are installed in standard positionsas indicated. Any change of position or removal oflights and/or plug points will carry an additional charge.-The electrical regulations stipulate one DB for everyfour stands. The DB will be fitted to the shell wall of oneof the four stands determined by the show layoutdemands. This DB can not be moved or altered.-plug points are centred to the back wall of the booth.-2 x 150W square Halogen lights are fitted to the top ofthe front fascia beam and approximately spaced witheven distribution over the length of the beam. Due togreening demands this will be phased out and bereplaced with low energy consumption fittings. Pleasebe aware that this might be the case with your booth.-the maximum loading per plug point is amp/500Watt.Should additional power be required, this has to beordered as an additional, possibly requiring a dedicatedDB which will be for the exhibitors account.panel size980x2316visible size964x23008mm bleedall round forinsert intosystemthese dimensionsindicate artwork sizes20980 9801980panel size980x2316visible size964x23008mm bleedall round forinsert intosystemNOTE: The dotted line indicates the Aluminium profile edge. The panel is insertedinto the aluminium profile which will cover 8mm from the edge of each panel to thetop, bottom and sides.A graphic layout to a wall should be set out to a size of 1980x2316 taking into accountall the areas covered by the profiles as well as the vertical breaks in the panels indicated.2316Unibox modular system details2 x 2 Unibox booth standards2x2 Unibox booth standardsdrawn Paul Hugo 29 Oct 2009Two panel back and side wall layout153.2x2 unibox shell.d1rev:1 Portside Rd Culemborg Cape Town www.scandisplay.co.za tel +27 21 409 1200 fax +27 21 421 4494NOTES: This design is copyright and remains the property of Scan Display. No duplication of this drawing or any part thereof, is allowed in any form, without the written permission of the designer. All dimensions and relevant details to be checked by production and pre-built prior to construction on site. All dimensions are given in mm. Any discrepancies are to be reported to the designer imme diately. No changes are to be made to this design without the approval of the designer. Colours and graphics are represented as close as possible but may differ from the actual finished product.

2.52.51200x198 visible size3mm black corex facia panelstand number and exhibitor namevinyl cut lettering white2 x 150W Halogen square spotlightsmounted on in line stand side(note that energy effecient lights arebeing phased in as part of ourgreening efforts.)Note: Total stand height 2400mm100032Amp DB1 per four booths15Amp plug(SA)2x1 corner boothinternal stand size1964x96415Amp plug(SA)2x1 in-line boothinternal stand size1964x96415Amp plug(SA)2x1 corner boothinternal stand size1964x9642000 2000 2000Unibox booth sizes20002400500x500 square capet tiles980 x 2316 PST 3mmwhite panelNo drilling, painting, nailing allowed.Self adhesive vinyl allowed.wall mounted 32Amp DB1 for every 4 standsUnibox booths front elevationprofile size3616.52635.5ua46964aluminiumfor exhibition and interior constructionprofiles15216 .5R 20045 016.5four way profile uprightsfour way octant profile50mm extra wide two-way profile beamsCan be used to create Ø400mm columns along with UA5579 profileLength: 2400mm upright with 20mm adjustable footLength: 964.5mm wall, 2964.5mm faciaLength: 5.1mFinish: satin silver anodisedua6222Finish: satin silver anodisedaluminium profilesFinish: satin silver anodised35.540016.550ua5650 ua48491716.526100152aluminium profiles152mm two way ”I“ beam profileØLength: 3964.5mmFinish: satin silver anodised(with feature holes) ua3553-fh5Note:-All lights and plugs are installed in standard positionsas indicated. Any change of position or removal oflights and/or plug points will carry an additional charge.-The electrical regulations stipulate one DB for everyfour stands. The DB will be fitted to the shell wall of oneof the four stands determined by the show layoutdemands. This DB can not be moved or altered.-plug points are centred to the back wall of the booth.-2 x 150W square Halogen lights are fitted to the top ofthe front fascia beam and approximately spaced witheven distribution over the length of the beam. Due togreening demands this will be phased out and bereplaced with low energy consumption fittings. Pleasebe aware that this might be the case with your booth.-the maximum loading per plug point is amp/500Watt.Should additional power be required, this has to beordered as an additional, possibly requiring a dedicatedDB which will be for the exhibitors account.panel size980x2316visible size964x23008mm bleedall round forinsert intosystemthese dimensionsindicate artwork sizes20980 9801980panel size980x2316visible size964x23008mm bleedall round forinsert intosystemNOTE: The dotted line indicates the Aluminium profile edge. The panel is insertedinto the aluminium profile which will cover 8mm from the edge of each panel to thetop, bottom and sides.A graphic layout to a 2 panel wall should be set out to a size of 1980x2316 taking into accountall the areas covered by the profiles as well as the vertical breaks in the panels indicated.2316panel size980x2316visible size964x23008mm bleedall round forinsert intosystem980Unibox modular system details2 x 1 Unibox booth standards2x1 Unibox booth standardsdrawn Paul Hugo 29 Oct 2009Two panel back and one panel side wall layout153.2x1 unibox shell.d1rev:1 Portside Rd Culemborg Cape Town www.scandisplay.co.za tel +27 21 409 1200 fax +27 21 421 4494NOTES: This design is copyright and remains the property of Scan Display. No duplication of this drawing or any part thereof, is allowed in any form, without the written permission of the designer. All dimensions and relevant details to be checked by production and pre-built prior to construction on site. All dimensions are given in mm. Any discrepancies are to be reported to the designer imme diately. No changes are to be made to this design without the approval of the designer. Colours and graphics are represented as close as possible but may differ from the actual finished product.

on a 3m shell wall the Unibox shleves can befitted to these vertical posts as shown belowThe vertical corner posts can notbe used to support shelveson a 2m shell wall only the 800x250 Unibox shelfcan be used as shown below on this vertical post.NOTE:-Panels are finished with White PVA-panels can be painted with PVA-the user will replace at their costany rented panel that has any applicationor alteration to the panel that prevents there-use of such panel.panel size964x230016mm MDF white-no drilling or fixingto this panel deeperthan 12mm allowedpanel size964x230016mm MDF white-no drilling or fixingto this panel deeperthan 12mm allowedpanel size964x230016mm MDF white-no drilling or fixingto this panel deeperthan 12mm allowed2300-max. loading 15Kgwithin a maximumdistance of 100mmfrom the face of thepanel. No object orfixture is allowed toproject further than300mm from the faceof the Mounting panel.-max. loading 15Kgwithin a maximumdistance of 100mmfrom the face of thepanel. No object orfixture is allowed toproject further than300mm from the faceof the Mounting panel.-max. loading 15Kgwithin a maximumdistance of 100mmfrom the face of thepanel. No object orfixture is allowed toproject further than300mm from the faceof the Mounting panel.the vetical end posts to wallscan not be used to supportshelves36 36964 964 964the vetical end posts to wallscan not be used to supportshelvesNOTE: The maximum load per post is 20Kg-this allows only 2 fully loaded shelf bracketsper post. With lower loads more shelves canbe fitted.3m and 2m Unibox Booth walling showing Mounting panels inserted and shelves fitted1964 (2m shell wall layout)2964 (3m shell wall layout)964x2300 16mm MDF panels white - Mounting panels - typical layout for 2m and 3m wallfront elevation800x250 shelf - 16mm MDF white-can be fitted to any vertical post with adjoining panels in the same plane.-can not be fitted to corner post.-can not be fitted to wall end as this will infringe on the isle.-this is a cantilever shelf and max. load can only be placed directly over shelfsupport bracket. All other areas of the shelf will support light weight objects only.-load capacity 10Kg within 50mm from shelf bracket.-price includes fitting to specified height-additional height adjustments will be chargedfront elevation1800x250 shelf - 16mm MDF white-can only be fitted centre to a 3m shell wall and can not be used on a 1m and 2m shell wall.-height adjustable-price includes fitting to specified height-additional height adjustments will be charged-load capacity 10Kg/bracket equaly distributed over shelf.side elevationadjustable angle bracket-used as fixing point-spring loaded nut fits into aluminium profile groove-can be fitted to top groove of aluminium beam abovewall panels or in vertical groove of vertical posts facingthe stand.-no rental option on this item - purchase only- can support 5Kg-max load per beam -10Kg total loading vertical only-max. load per upright - 20Kg total loading vertical only250max. loadarea800 1800plan view800x250 Unibox shelfplan view1800x250 Unibox shelfNote:No custom structure or elements are allowed to be fixed to theUnibox booth walls or fascia beams. All Custom structuresand elements have to be self supportive.Customization of a Unibox booth falls outside the parametersof standard Unibox booth packages and SCAN can provide acustomized option at additional costs.Please contact your nearest scan branch for custom designand services.additionals to Unibox modular boothsUnibox booth additionals standardsdrawn Paul Hugo 29 Oct 2009153.2x2 unibox shell additionals.d1rev:1 Portside Rd Culemborg Cape Town www.scandisplay.co.za tel +27 21 409 1200 fax +27 21 421 4494NOTES: This design is copyright and remains the property of Scan Display. No duplication of this drawing or any part thereof, is allowed in any form, without the written permission of the designer. All dimensions and relevant details to be checked by production and pre-built prior to construction on site. All dimensions are given in mm. Any discrepancies are to be reported to the designer imme diately. No changes are to be made to this design without the approval of the designer. Colours and graphics are represented as close as possible but may differ from the actual finished product.