Regloplas- Temperiertechnik

More documents

Recommendations

Info

RT100, RT50 and RT61control systems,controller RT32The RT100 and RT50 control systems ensure an optimalfit for practically every application. The RT61 controlsystem and the RT32 controller are simple, cost-effectivesolutions for a wide variety of applications.All controllers are designed to avoid problems beforethey arise.Modern automatedmanufacturing processesrequire data transferbetween the temperaturecontrol unitand the productionfacility’s central computer– just one ofmany applications forthe RT100, RT50 andRT61 control systemswith data interface.16
Equipment RT100 RT50 RT61 RT32Operation and control3.5" colour TFT display • – – –Selectable language, incl. Chinese • – – –Operate with a sturdy rotary knob RCD (<strong>Regloplas</strong> Control Dial) • – – –Symbol field for displaying active functions and directions • – – –Dual units can be operated only via one display • – – –Logbook for alarms • – – –USB interface (host/device) • – – –Ramp program • – – –Flow-rate deviation monitor° • – –Seven-line clear-text LCD display. Choice of languages – • – –RT100RT50RT61RT32Temperature limit values (+/–) adjustable • • • °Control of the consumer temperature with cascade control for highest temperatureconstancy with 2 control circuits (consumer and fluid) ° ° – –Set-point switch-over (value 1/value 2) • • – –External sensor connection for Pt100, J (Fe-CuNi), K (NiCr-Ni) or T (Cu-CuNi)° ° – –Leak-stop operation° / – ° / – •/– •/ ° / –Drainage of the fluid from the consumer by suction/blow out° / – ° / – •/ ° •/ ° / –Time switch° ° – –Flow rate measurement from 2 to 200 l/min for water and oil up to 350 °C° ° ° °Contactless flow-rate measurement F1000° ° – –Inlet sensor (Pt100)° ° – –External control: set-point switchover, heating/cooling command° ° – –External control: set-point input, switching the unit on/off° ° ° –Data interfaces° ° ° –Scalable recorder outputs° ° ° –Heater-current monitor° – – –SafetyAll disturbances in the unit are indicated on the display • • • –Set-point “blockable” as protection against incorrect adjustment • • – –Monitoring of upper and lower limit values • • • °Unauthorized access to the programming levels prevented by a code • • • –Automatic pump rotation correction • ° • –Sensor-failure monitoring • • • •Automatic switch-over to the internal sensor (fluid) in the eventof external sensor failure • ° – –Units with automatic water refilling: In order to limit the consequences of leakage(i.e. hose burst) the filling time per refill and the number of refills per hour is limited inorder to protect the production installation against damage caused by water• • • –Common acoustic alarm (150 option) • • • •Visual alarm, colour LEDs • – – –ServiceIndication of the service interval • • • –Operating hours meter • • • –Programmed data remains stored during replacement of electronic components • • – –• Standard equipment° Option – Not available •/–; ° /– Unit-specific Further options available upon request17
Page 2 and 3: Regloplas has specializedin buildin
Page 4 and 5: Temperature control unitsfor water
Page 6 and 7: Technical data 90smart 90S 90XL 150
Page 8 and 9: Pressurised-watertemperature contro
Page 10 and 11: Technical data P100M P140smart P160
Page 12 and 13: Temperature control unitsfor therma
Page 14 and 15: Technical data 300smart 300S 300L(D
Page 18 and 19: Mobile high-performancehigh efficie
Page 20 and 21: REG descaling unit anddescaling age
Page 22 and 23: Corrosion inhibitor RK93• Tempera
Page 24 and 25: Regloplas accessoriesRegloplas acce
Page 26 and 27: Hoses1. Fabric-reinforced perbunane
Page 28 and 29: Interconnecting system(insulating c
Page 30 and 31: Fig. 4: Bayonet coupling and drilli
Page 32: RegloplasFlurhofstrasse 158CH-9006

Regloplas- Temperiertechnik

Create successful ePaper yourself

Delete template?

Save as template?