Torque measurement systems Catalogue (format: pdf ... - techsystem

TRANSDUCERS AND JOINT SIMULATORSSTATIONARYTRANSDUCERSAND JOINTSIMULATORSThe Crane Stationary Transducers and Joint Simulators provide quickand easy torque testing, verifying and calibrating of hand torque toolsand power tools.There are two groups of stationary transducers - Industrial and Metrology.● The Metrology group of transducers have very high accuracy andare used explicitly in torque metrology labs. The metrology transducersare only available as Industry Standard (IS) type and should never beused for testing or verifying power tools.● The Industrial stationary transducers are available in two styles -Industry Standard (IS) and UTA.- Industry Standard style is manufactured with a military typeconnector and the torque signal is 2 mv output per volt of excitation.This style transducer will work with most torque analyzers andreadouts.- UTA style is manufactured with a “smart chip” in the connectorand will automatically identify itself to the Crane family oftorque analyzers and controllers. When using this style the user isnot required to select span, range or mv per volt parameters.The Crane Joint Simulators provide a means of testing power tools ona repeatable, linear and accurate simulated joint. Joint rates can bemodified for a variety of applications. The mechanism is engineered tohave zero backlash and has a common centerline with the axis of thetransducer which provides accurate torque results.Features include:● Transducers featureprecision femalesquare drives tofacilitate testing ofhand and powertools● Transducers areavailable in 1/4”to 1” square drive● Heavy duty stainlesssteel transducerallows 140%overload capacity● Joint Simulators areflanged for easymounting to worksurfaceCRANE