USER'S MANUAL ED. 06/10 - AEQ

More documents

Recommendations

Info

6.2. Rear connection panel.AEQ OPERABroadcast Audio Mixer30
7. TECHNICAL SPECIFICATIONS.Microphone inputsTransformer balanced.Input impedance:> 3 kΩInput range:- 94 dBv Fader max. Master 0. / - 17 dBvEquivalent noise:< -123 dBv, 200 Ω, 20 Hz-20 kHzFader attenuation:- 00 / +12 dB.Line inputTransformer balanced. Electronic symmetry on OP-22.Input impedance:> 6,5 kΩInput range: -32 dBv Fader max. Master 0. / + 25 dBvFader attenuation:- 00 / +12 dB.Insert input / output on OP-11Output impedance:< 1,8 kΩNominal output level:- 6 dBv Input 0 dBv Fader 0. Master 0. Output master + 4 dBvInput impedance:> 50 ΩInput range: -12 dBv Fader max. Master 0. / +25 dBvInput / output telephone hybrid interface OP-33Output impedance:< 100 ΩOutput level:+2 dBv Output master + 4 dBvMaster fader 0. Channel fader 0.Phone channel send max. gain 533 max.Input impedance:> 8 kΩInput range:-18 dBv Fader channel max. Master 0. / +25 dBvExternal Inputs 1 and 2Electronic symmetry.Input impedance:> 5 kΩInput level:-2 dBv For 0 dBv at monitor output.Send and equalizationAuxiliary send:- 00 / +12 dBv- 00 / 0 dBv on pre-fader.Phone send:- 00 / +12 dBvMaster send:- 00 / +12 dBvEqualization OP-11:Low frequencies: +/- 16 dBvHigh frequencies: +/- 16 dBvMaster and Auxiliary stereo outputsOutput impedance:< 75 ΩNominal output level:+4 dBvMaximum output level:+18 dBv: D < 0.2%, 30 Hz-20 kHz+25 dBv: D < 0.2%, 60 Hz-20 kHz+27 dBv: D < 0.2%, 72 Hz-20 kHz3 dB Bandwidth: 20 Hz-20 kHzAbsolute output noise:< - 70 dBv / 20Hz / 20kHz Fader master Max. All sends muted.< - 80 dBv / 20Hz/ 20kHz Fader master 0. All sends muted.< - 85 dBv / 20Hz/ 20kHz Fader master - 70. All sends muted.Control room / studio room monitor outputsControl room mon. output impedance: < 75 ΩOutput level:+4 dBv Max. monitor level. Master output +4 dBvAbsolute noise:< -72 dBvHeadphones output impedance: < 70 ΩOutput level:+20 dBv H/Phones level max. Master output + 4 dBvIntercomInput impedance:> 4 kΩInput sensitivity:10 dBvOutput impedance:< 75 ΩOutput level:+25 dBv max.Signalling OP-77Power requirements:90 to 240 V AC. 50/60 Hz.Signalling voltage:+24 V DC, 10 VA.Power supplyPower requirements:90 to 240 V AC. 50/60 Hz.DimensionsHeight: 310 mm (12.20").Width: 830 mm. (32.67").Depth: 590 mm. (23.22").WeightWeight:30 kgAEQ OPERABroadcast Audio Mixer31
Page 1 and 2: OperaBroadcast Audio MixerUSER’S
Page 3 and 4: 5.9.1.5. Signalling……….……
Page 5 and 6: The AEQ OPERA Broadcast Mixing Cons
Page 7 and 8: 2. POWER SUPPLY.2.1. General.The de
Page 9 and 10: 4. MIXING CONSOLE DESCRIPTION.4.1.
Page 11 and 12: 5. MIXING MODULES DESCRIPTION.5.1.
Page 13 and 14: 5.2. OP-22.5.2.1. Functions.The dou
Page 15 and 16: 5.3. OP-33.5.3.1. Functions.The tel
Page 17 and 18: 5.3.3. Example of remote connection
Page 19 and 20: 5.4.2. Description of controls and
Page 21 and 22: 5.6. OP-50.5.6.1. Functions.The OP-
Page 23 and 24: 5.8. OP-77.5.8.1. Functions.The OP-
Page 25 and 26: 5.9. OP-78.5.9.1. Functions.The mon
Page 27 and 28: 5.9.1.5. Signalling.Below is shown
Page 29: 6. FIGURES AND DIAGRAMS.6.1. Block
Page 33 and 34: 8.2.2. The connections.Bear in mind
Page 35 and 36: AEQ OPERABroadcast Audio Mixer35
Page 37 and 38: 8.3. Figures 2 and 3.Figure 2, with
Page 39 and 40: AEQ OPERABroadcast Audio Mixer39
Page 41 and 42: 10. DELIVERY PART LIST.10.1. Jumper

USER'S MANUAL ED. 06/10 - AEQ

Create successful ePaper yourself

Delete template?

Save as template?