Application Manual 2013 - Functional Devices, Inc.

More documents

Recommendations

Info

Electronic Air CleanerModels RIBXGHF, RIBXGHTF, RIBXGHA, or RIBXGHTA can be used to control an electronic air cleaner based on whetheror not the blower motor is turned on.LOHIBlowerMotor120Vac SourceCRIBXGHF, RIBXGHTF,RIBXGHA, or RIBXGHTAWhen current drawnby Blower Motorexceeds RIBXGHthreshold, SPSTcontacts connect120Vac source toline input ofAir Cleaner.NeutralElectronic Air CleanerHumidifier ControlSolid and split core current sensors can be used along with a humidistat for control of a humidifier based on whetheror not the blower motor is turned on.BlowerMotor24VacCOMLOHICEnclosed MiniCurrent SensorHumidistatHumidifierEnclosed Mini Current SensorsRIBXKFRIBXKTFRIBXKARIBXKTARIBXGFRIBXGTFRIBXGARIBXGTAOccupancy Sensor on Open Protocol NetworkA LonMark® certified or a BACnet® compatible relay with a digital input can be used with an occupancy sensor in a roomand turn on and off loads based on that status. This saves the cost of buying a LonMark® compatible or BACnet®compatible occupancy sensor by utilizing the digital input on our device.Network24 Vac/dcLonMark® Certifed orBACnet® Compatible RelayClass II Dry Contact InputLonMark® Certified RelaysRIBTW2401B-LNRIBTW2402B-LNRIBTW2401SB-LNRIBTW2402SB-LNOccupancy SensorBACnet® Compatible RelaysRIBTW2401B-BCRIBTW2402B-BCLineNeutralOrgYelLoad800.888.5538 : www.FunctionalDevices.com7
Loop-Powered RIBXK420 Series andRIBXG420 Series (High-Accuracy)Control Optoisolated Relay with4-20mA LoopAdd 250Ω across Optoisolated Relay 5-25 Vdc control input.Relay turns on at approximately 10mA and off at 8mA.Mini Current SensorMini Current SensorDC SupplyLoad WireDC SupplyLoad Wire- +*Add 250 Ohms for1-5 Vdc Analog InRED +BLACK -- +*Add 250 Ohms for1-5 Vdc Analog In250ΩRED +BLACK -- +4-20 mA Analog In*1-5 Vdc Analog InControllerEnclosed Mini Current SensorsRIBXK420-20RIBXK420-50RIBXK420-100RIBXG420-20RIBXG420-50RIBXG420-100Enclosed RelaysRIBTELCRIBTELSRIBTE24BRIBTE24SBRIBTE24PTrack RelaysRIBME2401BRIBME2402BRIBME2401SBRIBME2402SBRIBME2401PRIBME2402PEnclosed MiniCurrent SensorsRIBXK420-20RIBXK420-50RIBXK420-100RIBXG420-20RIBXG420-50RIBXG420-100Self-Calibrating Current SensorsThe self-calibrating current sensor begins its 30 second self calibration process the first time current is applied within the operatingrange. This procedure uses the user selected differential to set the trip threshold at a 15% or 25% level. Selection is completed priorto install using the appropriate DIP switch setting, keeping the installer’s hands away from possible shock hazard, as well as savinginstallation time.( OLD WAY )Danger!!!Line( NEW WAY )SafeLineSelf-Calibrating Current SensorsRIBXGA-SCALRIBXGTA-SCALOldManual SensorNewRIBXGA-SCALOpen CoverMotorStarterClosed CoverMotorStarterLoadScrewdriverLoadHands and tools exposedto high voltage whileadjusting potentiometer ofcurrent sensorHands safely awayfrom high voltage becauseSCAL adjusts itself8 Functional Devices, Inc. : American Made. American Owned.
Page 1 and 2: Application Manual 2013
Page 3 and 4: Panel Mounted Relay and Internal Se
Page 5 and 6: Limit Extra Transformers with Dry C
Page 7: Condense Work Space and Wiring (Pow
Page 11: Time DelayLoad 2 stays on selected

Application Manual 2013 - Functional Devices, Inc.

Create successful ePaper yourself

Delete template?

Save as template?