X3PM,X3AM Data sheet

Pre-amplified/3V Excitation/AbsoluteX3PM,X3AM Data sheetFeaturesApplications. 3V excitation, Battery operation available. Volt level output. On-chip amplification and temperature compensations. Pre-calibration of offset voltage and spanPart number for orderingX3AM - 115KP A S RModelX3PMX3AMRated pressure (Pa)Pressure typeA:Absolute. Industrial instrumentation. Medical device. Barometer, Altimeter. Altitude compensationTerminal leads configurationNo mark : DIP(X3PM)S : Surface mount package (X3AM)Terminal leads direction (See Outline Diagram)No mark :R :Pressure typeX3PMAbsolute pressureX3AMModelPackage configuration Dual-In-line-Package (DIP) Surface mount packageMeasurable pressure range (kPa)Part number for ordering15 115 X3PM-115KPA X3PM-115KPAR X3AM-115KPASRModel/Rated pressure 115KPA UnitRecommended operating conditionsPressure typeAbsolute pressureRated pressure 115 kPa.absMeasurable pressure range 15 115 kPa.absPressure mediaNon-corrosive gas onlyExcitation voltage 3.0 0.3 VDCAbsolute maximum ratingMaximum load pressureTwice of rated pressureMaximum excitation voltage 6 VDCOperating temperature 10 80Storage temperature 20 100Operating humidity 30 80 (No dew condensation) RHElectric performances/characteristics (Excitation voltage Vcc=3.0V constant, Ambient temperature Ta=25 )Current consumption less than 6 mAOutput impedance less than 10Source current less than 0.2 mASink current less than 1 mAMechanical response time 2 (For the reference) msecFull scale span voltage 1.5 VOffset voltage 0.5 0.0375 VFull scale span voltage 2.0 0.0375 VAccuracy 2.5 FS/0 50Note ;SpecificationsExcluding input voltage error.1

Pre-amplified/3V Excitation/AbsoluteX3PM,X3AM Data sheetOutline dimensionsX3PM (Absolute pressure)Unit:mm126 545.52.858Pressure port456R1.55143C0.515.24(600mil)1 23Labelled faceplate321600.51.22.54 2.54Recommended footprint for PCB6- 0.9(Diameter of through holes)6- 1.8(Diameter of lands)2.86.815.22.542.54(unit : mm)X3PM-R (Absolute pressure)Unit:mm14126 5 4max.150.255.52.858R1.53C0.5Pressure port15.24(600mil)45651 2 3321Labelled faceplate1.20.5602.542.54Recommended footprint for PCB6- 0.9(Diameter of through holes)6- 1.8(Diameter of lands)2.86.82.5415.22.54(unit : mm)2

7Pre-amplified/3V Excitation/AbsoluteX3PM,X3AM Data sheetOutline dimensionsX3AM2.54 2.541 2 3Unit:mmPressure port6 5 470.8Index30.1510 MAX.0.810.315 MAX.10.253.56 5 4 Labelled faceplateRecommended footprint for PCB1.72.541.42.541 2 3Land-pads9.4(unit : mm)3

Pre-amplified/3V Excitation/AbsoluteX3PM,X3AM Data sheetConnection diagramX3PM (Absolute pressure)Vcc(DC3V)VccVoutVoutGNDRemarks :1) C1 : Connect 680pF capacitor within 2cm distancefrom leads.2) C2 : Connect 0.01 F or more capacitor within 2cmdistance from leads.3) 2 and 3 pins must be No Connection. Open them asfloating ones completely, and do NOT connect toother line or each other.C2GNDC1X3AMVcc(DC3V)GNDVoutVoutVccRemarks :1) C1 : Connect 680pF capacitor within 2cm distance fromleads.2) C2 : Connect 0.01 F or more capacitor within 2cm distancefrom leads.3) 4 and 5 pins must be No Connection. Open them as floatingones completely, and do NOT connect to other line oreach other.C2GNDC1Note ; Please read instruction “Notes” before using the sensor.Fujikura reserves the right to change specifications without notice.If you have any questions regarding technical issues or specifications, please contact us.Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, JapanPhone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538E-mail : sensor@fujikura.co.jp4