ACE3000 type 100/110 - Itron

Electricity>> Markets of the ACE3000 type100/110Adding ValueThrough the innovative design and use of state-of-the art metering technology the ACE3000 type100/110 meters offer benefits to both utilities and end-users, adding significant value to all stepsof the metering process.>>>>Basic Residential- Active energy measurement- Simple consumption monitoring- Diverse anti-fraud featuresHigh Residential- Optional double tariff system- Wide current range- Data interface for basic loadmanagement- Active export energy(e.g. green energy suppliers)Utility Benefits>> Reduced logistical costThanks to the effective design and low weight of the meter, stock can be reduced to aminimum and transport costs can be kept low. The same meter can be used for single andpolyphase applications.>> Reduced cost of certificationThe certification can be done very efficiently as the calibration links can be opened andclosed without the use of screws.> > Easy installationThe increased opening diameter of the mains terminals, including the neutral, makes theACE3000 type 100/110 meters easy to install. The auxiliary terminals are easily accessibleand allow wire connection even with sleeves. Start-up is supported by indicator LED forphase lost and phase rotation.>> Simple meter readingThe traditional drum register offers excellent readability and reliability and is even suitable forself-reading purposes. As an additional advantage, the register can be read when the meteris de-energised.>> Revenue protectionAnti-fraud features, e.g. the cover extended to the ground plane, protection of the calibrationlinks and the always positive registering mode guard against tampering.>> Resistance to environmental hazardsThe ACE3000 type 100/110 series has been tested to cope with severe environmentalconditions, even exceeding the requirements of relevant standards, such as electromagneticdisturbances, impulse voltages and variations in network conditions (loss of power, underandover-voltage).>> Firmware development of ACE3000type 100/110End-User Benefits>> Visibility of consumptionThe easy-to-read drum register informs the end-user about current energy consumptioneven when the premises are de-energised.>> Registering of export energyEnergy generated and supplied by the end-user can be permanently displayed on the meterby a second register.>> Indication of abnormal conditionsAbnormal operation conditions, such as phase lost, reverse energy flow and reverse phaserotation are indicated by status LEDs.>> System integrationEquipped with 1 or 2 SO pulse outputs the ACE3000 type 100/110 meters can be easilyintegrated into the end-user’s load management system.> > Characteristic load curve at Un Balanced 50Hz and load at 23°C (In = nominal current)2.001.000.00-1.00-2.00PF = 1PF = 0,5Load (% I n )(cos = 1, cos = 0.5)