High Performance Walk Through Metal Detector - Scan-X Security

HI-PE Multi-ZoneHIGH PERFORMANCE WALK-THROUGH METAL DETECTOR• High level of Detection Uniformity• High Immunity to externalinterferences• Highly visible double Displayprovides single or multiple locationof weapons in transit• Very high speed of Detection• High Reliability• Local or Remote Programmingwith networking capabilitiesAVAILABLE INOUTDOOR VERSION(IP65)HIGH DISCRIMINATION AND FLOW RATEThe HI-PE Multi-Zone is a high performance walk-through MetalDetector which exceeds all International Security Standards. A“height on person” display actually indicates, by means of illuminatedLED’s, the position of the weapon on the person.Three operating modes are available: Floating (standard), thelocation zones are not fixed, as in the case of metal detectors withmultiple receiver-transmitter coils, but are variable and continuousso as to achieve optimum resolution; 8-Zones and 4-Zones,the alarm threshold can be adjusted individually for each zone.www.ceia.net

HI-PE Multi-Zone WALK-THROUGH METAL DETECTORMAIN FEATURESIMMEDIATE SELECTION OF INTERNATIONALSECURITY STANDARDSDETECTION OF MAGNETIC, NON-MAGNETIC ANDMIXED ALLOY METAL WEAPONSHIGH DETECTION SPEED: up to 15 m/s (45 ft/s)EXCEPTIONAL IMMUNITY to electromagnetic andmechanical interferencePROGRAMMABLE OPERATION controlled bymicroprocessorPROGRAMMING via built-in keypad and displayor RS-232 serial connection to Remote Control Unit(RCU2), a PC or a computer networkPROGRAMMING ACCESS protected by both amechanical lock and two alphanumeric passwordsMULTIPLE INSTALLATIONS: automaticsynchronisation between two or more metaldetectors with a reciprocal distance of down to 5 cm(2”) without the use of cablesHIGH-INTEGRATION PROFESSIONAL ELECTRONICSand maximum reliabilityCONTROL UNIT incorporated into the detectorNo initial or periodic calibrationEASY MAINTENANCE: modular control unit for arapid replacementColour: light grey RAL 7040INSTALLATION DATAPOWER SUPPLY: 115 / 230 VAC, ±15%, 45 ÷ 65 Hz,30 VA maxEXTERNAL INTERFACE: RS-232C for connection to aRemote Control Unit (RCU2), a terminal, a computer,an external modem or other CEIA Metal DetectorsPROTECTION Indoor Model: IP20 - IEC529DEGREE Outdoor Model: IP65 - IEC529OPERATING TEMPERATURE: -20°C to +70°CSTORAGE TEMPERATURE: -35°C to +70°CRELATIVE HUMIDITY: 0 to 95% (withoutcondensation)ALARM MODESVISIBLESIGNALSAUDIBLESIGNALSMulti-zone display bar for “heighton person” localizationHigh intensity displayGreen and red metering signalsproportional to the mass of theobject detectedHigh acoustic intensity alarm signalVolume and tone of alarm signalcan be programmedThe HI-PE Multi-Zone allows a high levelof discrimination between significant metalmasses, such as the weapons which are tobe detected, and personal metal items.Extremely high levels of immunity toexternal interference, making it easy touse even when external electrical noise isencountered. The sensitivity is independentof the transit speed.The detector’s control unit is incorporatedinto the structure. Access to programmingis protected both by a mechanicallock and by two alphanumeric passwords.The panels are washable and are equippedwith shock absorbent edges to protect themagainst damages.The HI-PE Multi-Zone is manufacturedusing the most advanced electronics technology,conforming to ISO 9001 QualityControl Standard procedures.CERTIFICATION AND CONFORMITYComplies with Regulations relating to pacemakers,defibrillators or other vital support systems,pregnant women and magnetic storage media (floppydisks, audio cassettes, video cassettes and similar)Conforms to the current International SecurityStandards for Walk-Through Metal DetectorsComplies with EC Regulations and InternationalStandards relating to Electrical Safety andElectromagnetic Compatibility (EMC)ACCESSORIES / OPTIONSEMERGENCY BATTERIESRCU2: the consoleprovides complete remotecontrol of CEIA Walk-Through Metal DetectorfunctionsMDNC-1: Ethernetnetwork interface forCEIA Metal DetectorsMBSU-1 Unit is aportable device designedto supply CEIA MetalDetectors in outdoorapplications or insituations where mainspower supply isunavailableMD SCOPE: software for oscilloscope simulation andterminal operation on CEIA MDsMETAL DETECTORDIVESTING TABLE: thisarticle acts both as aspacer between theX-ray unit and theMetal Detector and as atemporary depositoryfor metal personal effectsAPSIM: connectionmodule with Antitamperon/off switch andEthernet interfacePHOTOCELL TRANSITCOUNTER and automaticalarm rate calculationOUTDOOR VERSION,waterproof degree IP65UNDER THE ALARM THRESHOLD* Small metal mass**** Medium metal massOVER THE ALARM THRESHOLD** Medium metal mass**** Large metal massGREEN AND RED METERING SIGNALSPROPORTIONAL TO THE METAL MASS DETECTEDVISUAL ALARM ZONE INDICATIONSINGLE & MULTIPLE LOCATION OF THE METALMASS DETECTEDDIMENSIONS2050 mm720/820* mm835/935 mm* AVAILABLE ON REQUEST660 mm2255 mmCEIA PROVIDES FULLOPERATIONAL ANDTECHNICAL TRAININGSUPPORT; ON SITE ORAT HEADQUARTERSBY CEIA CERTIFIEDPERSONNELZona Industriale 54/G, 52041 Viciomaggio - Arezzo (ITALY)Tel.: +39 0575 4181 Fax: +39 0575 418298 E-mail: infosecurity@ceia-spa.comwww.ceia.netDP019UK60K10v3 - 42354CEIA reserves the right to make changes, at any moment and without notice, to the models (includingprogramming), their accessories and options, to the prices and conditions of sale