4TNV84T-BGGE Tier 4.pub - Yanmar

4TNV84T-BGGEIndustrial Diesel EnginePerformance Data_______________________________________________Dimensions_________________________________________Please Contact Yanmar for DetailsLengthWidthHeight27.3 in (694 mm)20.3 in (517 mm)27.9 in (709 mm)Note: Dimensions depend on final specifications.kW to Hp conversion used is expressed as: HP = (kW value) x 1.34Rated Speed (rpm) Net rated kW Net rated HP Max. Torque (ft-lb)1800 26.7 35.9 Call YanmarRatings Definitions and Conditions_____________________________________________________________________________________________________*Rated power listed is NET engine output. The engineoperating environment and driven machine conditionsmust be studied carefully when selecting an engine inorder to ensure correct engine selection, maximizeengine performance, extend engine service life andimprove machine capacity.Consult the TNV Application Manual for additional engineratings and engine application information.Application standards for Yanmar industrial engines: Inletair standard conditions with a total barometric pressure of100kPa (29.5 in. Hg), with a vapor pressure of 1 kPa(.295 in. Hg), and 25°C (77°F)._____________________________________________________________________________________________________Materials and specifications herein are intended to serve as a guide in engine selection and subject to change without notice.The International System of Units (SI) is used in this publication. Yanmar and its logos, as well as corporate identity usedherein, are trademarks of Yanmar and may not be used without permission.Printed in USA© 2008 YanmarAll Rights Reserved