Sonus SBC 1000 / SBC 2000 Configuration Guide - Sonus Networks

4.1.6 UX Installation of Root Certificate 15 4.1.7 UX Requesting Signed Certificate from CA 16 4.1.8 UX SIP Signaling Endpoints 20 4.1.9 UX Public Ethernet Port and IP Addressing 22 4.1.10 UX Configuring Ethernet Port 23 4.1.11 UX Configuring the IP Default Route 25 4.1.12 UX Configure Internal Private IP Static Route 26 4.1.13 UX Configuring SIP Server Tables 27 4.1.14 UX Configuring Transformation Tables 29 4.1.15 UX Media Configuration 31 4.1.16 UX Call Routing Process 33 4.1.17 UX Configuring Signaling Groups 34 4.1.18 UX Call Routing Table Configuration 36 4.1.19 Configuring UX to Force Transcoding to G729 38 4.1.20 Configuring UX for Analog Tenor Support (FAX) 39 4.1.21 Configuring UX for Calling Number Privacy 44 4.2 Microsoft Lync 2010 Configuration 45 4.2.1 Adding the UX into Lync Server Routing 47 4.2.2 Configuring AT&T Telephone Numbers to Lync Users 49 4.2.3 Microsoft Lync for Analog FAX 50 4.3 NET Tenor Configuration 54 4.4 Using TCP instead of TLS between UX and Lync 56 4.5 Configuration for Enhanced IP Flexible Reach Service 60 4.5.1 MS Lync Configuration for Enhanced IP Flexible Reach Service 61 4.5.2 NET UX Configuration for Enhanced IP Flexible Reach Service 64 5 UX TROUBLESHOOTING 65 5.1 Visual Analysis 65 5.1.1 Current SG Status and Call Activity 65 5.1.2 Current Alarms 66 5.2 Viewing UX2000 Debug Logs 67 5.3 Sending UX Debug Logs to a Syslog Collector 67 Network Equipment Technologies UX Configuration Guidefor AT&T IP Flexible Reach (MIS/PNT/AVPN) and Microsoft Lync 20104