You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LEGENDStraight-ThroughSingleShut-OffDoubleShut-OffNon-SpillGeneral Purpose CouplingsPAGE | DESCRIPTION54 NSH: Pressure-balanced non-spill design with 100%metal-free, spring-free flow path.Material: Glass-filled polypropyleneTubing ID Sizes: 3/8" to 3/4" (9.5mm to 19.0mm)TABLE OF CONTENTS5660HFC12: Efficient valve design leads to high flow andexceptionally low spillage; shrouded thumb latch is easy togrip and simple to operate.Material: PolypropyleneTubing ID Sizes: 3/8" to 3/4" (9.5mm to 19.0mm)HFC35 & 57: Withstand harsh environments and offeredwith or without UV-resistant materials to withstand harmfulrays without affecting performance.Material: Polysulfone (white), UV-resistant polysulfone (black)Tubing ID Sizes: 3/8" to 3/4" (9.5mm to 19.0mm)Pictured: HFC5764FFC35: Features non-valved and unobstructed flow path toincrease flow and minimize turbulence.Material: PolysulfoneTubing ID Sizes: 3/4" (19.0mm)6| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Specialty ProductsPAGE | DESCRIPTION66 Tentube: Allows connection and disconnection of upto ten lines with one slide latch; tubing orientation ensured byphysical keying.Material: Nylon, acetal, polypropyleneTubing ID Sizes: 1/16" to 1/8" (1.6mm to 3.2mm)Not to scale68Sixtube: Snap-in panel mount design and flexibilityto connect and disconnect six separate lines with or withoutvalves.Material: Acetal, polypropyleneTubing ID Sizes: 1/16" to 1/8" (1.6mm to 3.2mm)Twin Tube: One easy-to-use quick disconnect for twoseparate non-valved flow paths.Material: Acetal, ABSTubing ID Sizes: 1/16" to 1/8" (1.6mm to 3.2mm)Not to scale70Multi-Mount: Connects three to five lines at once;keyed to prevent mismatched connections.Material: Acetal, chrome-plated brassTubing ID Sizes: 1/8" to 3/8" (3.2mm to 9.5mm)TABLE OF CONTENTS72Hybrid Connector: Eliminates the need for multipleconnections and simplifies the user interface between remotetools and a device.Material: Glass-filled polypropylene.Not to scale73Mini Hybrid Connector: Eliminates the need formultiple connections and simplifies the user interface betweenremote tools and a device.Material: Glass-filled polypropylene.Not to scale| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.7
LEGENDStraight-ThroughSingleShut-OffDoubleShut-OffNon-SpillLife Sciences - Medical & BioprocessingPAGE | DESCRIPTION74 SMC: Twist-to-connect design manufactured and packagedin a cleanroom.Material: Medical-grade polycarbonateTubing ID Sizes: 1/16” to 1/8” (1.6mm to 3.2mm)75 SRC: A unique small bore connector that eliminates thepotential for misconnections with luer fittings.Material: Medical-grade polypropyleneTubing ID Sizes: Sizes: 1/8" to 3/16" (3.2mm to 4.8mm)76MPC: Easy-to-use and secure connection for critical fluidapplications; includes pressure sealing caps and plugs andoptional locking sleeves.Material: Medical-grade ABS, polycarbonate, polysulfoneTubing ID Sizes: 1/8" to 3/8" (3.2mm to 9.5mm)TABLE OF CONTENTS7880MPX: Larger flow easy-to-use and secure connection forcritical fluid applications; includes pressure sealing caps andplugs and optional locking sleeves. Higher flow rate than theMPC.Material: Medical-grade polycarbonate, polysulfoneTubing ID Sizes: 3/8" and 1/2" (9.5mm and 12.7mm)Back-To-Back Body Adapters: Allow end usersto connect off-the-shelf single-use systems that may featureidentical coupling connections at the end of their tubing.Material: Medical-grade polycarbonate and medical-gradepolysulfone81Sanitary: Attaches directly to 3/4", 1"and 1-1/2" sanitaryterminations to provide greater flexibility for integratingcomponents into single-use or hybrid process systems.Material: Medical-grade polysulfoneTermination Sizes: 3/4", 1"and 1-1/2" sanitary82SaniQuik: Integral sanitary termination attaches tohard-plumbed systems with sanitary clamps; permits quickand easy connection to single-use bag systems, manifolds ortube sets with MPC or MPX bodies.Material: 316L stainless steelTermination Sizes: 3/4" and 1-1/2" sanitary8| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Life Sciences - Medical & BioprocessingPAGE | DESCRIPTION83MPU: Larger flow twist-to-connect design featureseasy-to-use locking mechanism that guards against accidentaldisconnects.Material: Medical-grade polysulfoneTubing ID Sizes: 3/4" (19.0mm)84 HFC39: Features aseptic disconnect functionality withautomatic shutoff valves, preventing external organisms fromentering the media flowpath upon disconnection.Material: Medical-grade polysulfoneTubing ID Sizes: 1/4", 3/8" and 1/2" (6.4mm, 9.5mm and12.7mm)Not to scaleNot to scale8688AseptiQuik ® Connector: Provides a quick and easysterile connection, even in non-sterile environments.Material: Medical-grade polycarbonateTermination Sizes: 1/2" (12.7mm) HB, 3/8" (9.5mm) HBand 3/4" sanitaryAseptiQuik DC Connector: All-in-one single-useconnection technology offering both a sterile connection and asterile disconnection.Material: Medical-grade polycarbonateTermination Sizes: 1/4", 3/8" and 1/2" (6.4mm, 9.5mm and12.7mm)TABLE OF CONTENTS90Steam-Thru ® Connections: Allow quick and easysterile connection between biopharmaceutical processingequipment and disposable bag and tube assemblies.Material: Medical-grade polysulfoneTermination Sizes: 1/2" (12.7mm) HB, 3/8" (9.5mm) HBand 3/4" sanitaryNot to scale| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.9
LEGENDStraight-ThroughSingleShut-OffDoubleShut-OffNon-SpillHigh Purity CouplingsPAGE | DESCRIPTION94ChemQuik ® CQH06/CQV06: All plastic design forultra-pure media and high chemical resistance.Material: Natural, virgin polypropylene and PVDFTubing Sizes: 1/4" to 1/2" flare; 3/8" to 3/4" NPTPictured: CQV06TABLE OF CONTENTSShown at 50% scaleNot to scale96 ChemQuik CQGO6: Spring-free and metal-free flowpath for high flow capacity and non-spill, high purity connections.Material: Natural, virgin polypropyleneTubing Sizes: 3/8" to 3/4" flare; 3/8" to 3/4" NPT97ChemQuik Dual Containment System:Flare nuts and panel mount fittings that facilitate doublecontainment of critical chemical lines.Material: Natural, virgin polypropyleneDispensing ConnectorsNot to scale.PAGE | DESCRIPTION98DrumQuik ® PRO & DrumQuik PUR: Closedchemical dispensing system with a reusable coupler and arecyclable dip-tube assembly for chemical extraction fromdrums, jerry cans and IBCs.Material: Food grade, virgin polypropylene and polyethyleneThread Sizes:Drum Inserts: 2" American buttress, BCS 56x4 and 2" NPS (G8)Couplers: 1/2" NPT, 3/4" hose barb and 3/4" BSPP102 DrumQuik Adapters and Accessories: Colderoffers many accessories intended for use with DrumQuik ® PROand DrumQuik PUR systems. These include vent check valves,foot valves, fittings and more.10| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Dispensing ConnectorsPAGE | DESCRIPTIONNot to scaleNot to scale104 DrumQuik ® 3-Port UDA: Used with 3/4" male NPTcoupling terminations to adapt dip-tubes to standard drumclosures for closed system dispensing.Material: Food grade, virgin polypropyleneThread Sizes: UDA 3-Port: 3/4" male NPT; UDA: none105 Bottle Adaptor Kits: Intended for use on reagentbottles with SP400-38mm threads.Material: Natural, virgin polypropyleneThread Sizes: SP400-38mmDrumQuik Asian Drum Adaptors,Plugs and CapsIdentiQuik ® RFID available106 UDC: Provides closed connection to bag-in-box packagingwith 38mm threaded and snap-in necks.Material: Polypropylene and acetalTubing ID Sizes: 3/8" to 3/4" (9.5mm to 19mm)Not to scaleFittingsNot to scale108 Puncture Seal: Provides closed connection to HedwinCubitainer ® bag-in-box container systems and flexible bags orbottles with SP400 38mm threads..Material: Polypropylene (coupling) and polyethylene (cap)Tubing ID Sizes: 1/4" and 3/8" (6.4mm and 9.5mm)PAGE | DESCRIPTION110FitQuik TM Connectors: High quality fittings forleak-free tubing connections. These precision molded fittingsare designed to eliminate tubing leak points in applicationssuch as medical devices, analytical instrumentation or airdrivenequipment.TABLE OF CONTENTSAdditional Products & InformationPAGE | DESCRIPTION128 Custom Capabilities: Colder works directly with ourcustomer’s design engineering team to solve the most difficultfluid and air management problems.130Accessories: Offering includes a variety of ancillarycomponents from fittings and luers to PTF nuts and dust caps.131 Sterilization and Disinfectant Methods132 Coupling Material Descriptions| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.11
SMC SERIESActual sizeSMC SERIES<strong>Specifications</strong>Pressure: Vacuum to 100 psi, 6.9 barTemperature:Acetal, Chrome-Plated Brass:-40°F to 180°F (-40°C to 82°C)Polypropylene:32°F to 180°F (0°C to 82°C)ABS:-40°F to 160°F (-40°C to 71°C)Materials:Main components: ABS, acetal, polypropylene,chrome-plated brassLocking sleeves: AcetalValves: AcetalValve spring: 316 stainless steelO-rings: Buna-N with acetal or chrome-platedbrass, EPDM with polypropyleneColor:Main components: Natural white (acetal andABS), almond (polypropylene), chrome and black(chrome-plated brass)Tubing Sizes:1/16" to 1/8" ID, 1.6mm to 3.2mm and 5.0mmWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions.The SMC & SMF1 are Colder's smallestcouplings. These twist-to-connect couplings providea reliable and more secure alternative to luer-typeconnections. They also allow for the tubing to rotate freelywhen connected. This important feature prevents bothkinked tubing and accidental disconnection during use.The SMC Series is also available with optional RFID (Radio FrequencyIdentification) capability.FeaturesTwist to connectFree coupling rotationQuarter turn latch clickswhen connectedBenefitsPrevents accidental disconnectsEliminates kinked tubingPrevents damage due to over torquingLiquid Flow RatesLiquid Flow RateInformation for CouplingsThe chart below shows the flowrate for Colder couplings. Eachcoupling was tested with waterat 70°F (21°C). To determineflow rates for specific couplingconfigurations use the formulabelow.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for Subminiature CouplingsBODIES SMM01 SMM02 BODIES SMM01 SMM02SMF01 .03 .03 SMFD02 .03 .08SMFD01 .03 .03 SMPT02 .03 .19SMF02 .03 .19 SMPTD02 .03 .0812
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.SMC SERIESRFID<strong>Specifications</strong>RF CommunicationRange:Approximately 1"OperatingVoltage:8-24V standardPowerConsumption:1.2W MaximumCommunication:ASCII RS-232 (DB-9),USBI-Code RFID Tags:13.56 MHzISO-15693 - 112 bytesprogrammableNOTE: RFID tags not approved fore-beam or gamma sterilization.OperatingTemperature:32°F to 150°F (0°C to66°C)Materials are listed onpage 12. Customized parts(materials, voltage,termination, cable length,etc.) available.Call for more information.The IdentiQuik ® Series ofsmart couplings are RFID enabled couplingsused on equipment and in processes. RFIDis an identification method that relies onremotely writing and reading data. Smartcoupling applications include: inventorylevel meters, surgical tool identification,product protection and many more.Coupling InsertsAcetal Locking SleeveAcetal Locking SleevePatentedTERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINEHOSE BARBSMART COUPLINGS WITH RFIDIdentiQuik SMC SeriesIdentify misconnections: eliminate out-of-sequenceconnections or misconnections due to operator errorProtect your brand: prevent out-of-date, incorrect ormisapplied products from being usedProlong equipment life: prevent the accidental orunintentional use of harmful mediaSave time: automatic documentation of package andmedia lot numbers, date codes and moreProduct Dimensions (See drawing on page 14)TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID iSMFT0103 iSMFDT0103 .76 .76/.911/8" ID 3.2mm ID iSMFT0203 iSMFDT0203 .76 .91/.91TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID iSMFT0100 .76 .761/8" ID 3.2mm ID iSMFT0200 .76 .91TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID iSMMT0103 .76 .761/8" ID 3.2mm ID iSMMT0203 .76 .91TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID iSMMT0100 .76 .761/8" ID 3.2mm ID iSMMT0200 .76 .91All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: iSMC Readers are built on a custom basis. I-Code SL1 tags are available for existing applications, contact the factoryfor assistance.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.13
Actual sizePMC SERIES<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:-40°F to 180°F (-40°C to 82°C)Materials:Main components and valves: AcetalThumb latch: Stainless steelValve spring: 316 stainless steelExternal springs and pin: Stainless steelO-rings: Buna-NColor:Natural white, others availableTubing Sizes:1/16" to 1/4" ID, 1.6mm to 6.4mm IDPMC SERIESWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.The 1/8" flow PMC coupling covers a wide variety of generalpurposeapplications. Featuring the Colder thumb latch, the PMC is easier to use thanball-and-sleeve designs. One-hand connection/disconnection and integral terminationsmake the PMC the choice for ease of use and manufacture.This coupling is NuSeal compatible. See page 25 for details.FeaturesHose barb shroudIntegral terminationsCompatibleClicks when connectedBenefitsExtra protection for the 1/16" hose barbFewer leak points, shorter assemblies,faster installationsMates with PMC12 and MC Seriescouplings (see pages 20 and 24)Assurance of a reliable connection16
These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.C VValues for 1/8" Flow PMC CouplingsQ=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidPMC PMCD PMC PMCD PMC PMCD PMC PMCD PMC PMCD PMC PMCD PMC PMC PMC PMCD PMC PMCD PMC PMCDBODIES 2004 2004 2006 2006 2202 2202 2204 2204 2402 2402 2404 2404 2602 2304 2104 2304 2203 2203 2201 2201PMC1002 .40 .18 .50 .19 .25 .16 .50 .19 .50 .20 .51 .19 .50 .50 .38 .24 .30 .17 .03 .03PMCD1002 .27 .18 .31 .18 .24 .16 .28 .20 .26 .20 .29 .18 .26 .26 .27 .24 .25 .17 .03 .03PMC1004 .40 .21 .50 .24 .26 .18 .50 .24 .50 .20 .51 .24 .50 .50 .38 .26 .30 .19 .03 .03PMCD1004 .29 .19 .32 .23 .25 .17 .30 .23 .27 .21 .28 .23 .27 .28 .29 .24 .25 .18 .03 .03PMC1204 .40 .18 .50 .18 .25 .16 .40 .18 .40 .16 .36 .18 .40 .40 .38 .21 .30 .17 .03 .03PMCD1204 .21 .17 .22 .17 .20 .16 .22 .17 .21 .17 .20 .17 .21 .22 .21 .18 .21 .16 .03 .03PMC1602 .23 .15 .28 .18 .19 .14 .27 .15 .27 .15 .28 .18 .27 .27 .23 .16 .20 .14 .03 .03PMCD1602 .19 .15 .19 .15 .17 .14 .19 .15 .18 .15 .18 .15 .18 .19 .19 .15 .18 .14 .03 .03PMC1604 .33 .23 .44 .24 .24 .18 .44 .23 .44 .20 .38 .24 .38 .44 .33 .26 .26 .19 .03 .03PMCD1604 .23 .17 .26 .21 .22 .16 .26 .21 .26 .19 .25 .21 .21 .26 .23 .24 .22 .16 .03 .03PMC1703 .25 .20 .30 .20 .20 .17 .30 .20 .30 .19 .28 .20 .28 .30 .25 .18 .21 .17 .03 .03PMCD1703 .20 .17 .20 .17 .19 .15 .21 .17 .19 .17 .20 .17 .19 .20 .20 .16 .19 .16 .03 .03PMC1701 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .02PMCD1701 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .03 .02 .02PMC SERIESDID YOU KNOW ...CAD models are available for all Colder couplings. These files are availablein many formats including STEP, IGES and native file formats.You can see them online at www.colder.com.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.17
Product DimensionsADA.469"+.010-.000Greenlee ® punchnumber 60077Ø .500"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .05COUPLING INSERTS 1/2 .30 .05BBA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthPANEL PANELNUT HEX NUT THREAD5/8 1/2-24UNFCoupling BodiesPMC SERIESTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT PMC1002 PMCD1002 .79 1.001/8" BSPT PMC1002BSPT PMCD1002BSPT .79 1.001/4" NPT PMC1004 PMCD1004 .79 1.101/4" BSPT PMC1004BSPT PMCD1004BSPT .79 1.10TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B4.0mm OD, 2.0mm ID PMC12M42 PMCD12M42 .77 1.655/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMC12025 PMCD12025 .77 1.701/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC1204 PMCD1204 .77 1.72TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONPANEL MOUNTFEMALE THREADTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC1601 PMCD1601 .77 1.401/8" ID 3.2mm ID PMC1602 PMCD1602 .77 1.653/16" ID 4.8mm ID PMC1603 PMCD1603 .77 1.851/4" ID 6.4mm ID PMC1604 PMCD1604 .77 1.85THREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF PMC181032 PMCD181032 .77 1.25TERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B4.0mm OD, 2.0mm ID PMC13M42 PMCD13M42 .81 1.655/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMC13025 PMCD13025 .81 1.655.0mm OD, 3.0mm ID PMC13M5 PMCD13M5 .81 1.721/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC1304 PMCD1304 .81 1.75TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC1701 PMCD1701 .81 1.411/8" ID 3.2mm ID PMC1702 PMCD1702 .81 1.45/1.653/16" ID 4.8mm ID PMC1703 PMCD1703 .81 1.65/1.851/4" ID 6.4mm ID PMC1704 PMCD1704 .81 1.65/1.85TERMINATIONIN-LINEFEMALE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF PMC191032 PMCD191032 .81 1.25All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do notrequire ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc.18| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT PMC2402 PMCD2402 .58 1.03/1.451/8" BSPT PMC2402BSPT PMCD2402BSPT .58 1.03/1.441/4" NPT PMC2404 PMCD2404 .65 1.13/1.421/4" BSPT PMC2404BSPT PMCD2404BSPT .65 1.13/1.42TERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC4004 PMCD4004 .72 1.70/1.82non-valved shownTERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC4201 PMCD4201 .72 1.38/1.501/8" ID 3.2mm ID PMC4202 PMCD4202 .72 1.63/1.753/16" ID 4.8mm ID PMC4203 PMCD4203 .72 1.83/1.951/4" ID 6.4mm ID PMC4204 PMCD4204 .72 1.83/1.95TERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B4.0mm OD, 2.0mm ID PMC20M42 PMCD20M42 .58 1.08/1.605/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMC20025 PMCD20025 .58 1.13/1.651/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC2004 PMCD2004 .58 1.15/1.573/8" OD, .25" ID 9.5mm OD, 6.4mm ID PMC2006 PMCD2006 .65 1.40/1.52TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC2201 PMCD2201 .50 .80/1.471/8" ID 3.2mm ID PMC2202 PMCD2202 .50 1.00/1.673/16" ID 4.8mm ID PMC2203 PMCD2203 .50 1.20/1.881/4" ID 6.4mm ID PMC2204 PMCD2204 .50 1.22/1.70non-valved shownPMC SERIESTERMINATIONIN-LINEFEMALE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF PMC281032 PMCD281032 .58 .63/1.31TERMINATIONELBOWFERRULELESSPOLYTUBEFITTING, PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D5/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMC21025 .50 1.17 .751/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC2104 PMCD2104 .50 1.17/1.21 .77TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/8" ID 3.2mm ID PMC2302 PMCD2302 .50 .85/1.21 .75/.691/4" ID 6.4mm ID PMC2304 PMCD2304 .50 1.00/1.21 .95/.90non-valved shownAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semirigidtubing, i.e., polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.19
<strong>Specifications</strong>PatentedActual sizePressure: Vacuum to 120 psi, 8.3 barTemperature:32°F to 160°F (0°C to 71°C)Materials:Main components and valves: PolypropyleneThumb latch: Stainless steelValve spring: 316 stainless steelExternal spring and pin: Stainless steelO-rings: EPDMSterilization:Gamma: Up to 50 kGy irradiationColor:AlmondTubing Sizes:Microbore to 1/4" ID, Microbore to 6.4mm IDWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions. Use the graph to the right as a guide.PMC12 SERIESThe 1/8" flow polypropylene PMC12 offers manyof the same configuration options as the PMC. The polypropylenematerial adds greater chemical resistance and is gamma sterilizable. ThePMC12 also mates to small diameter rigid tubing. Available with a 1/4-28flat bottom port and 1/4-28 UNF threads, these couplings eliminate theneed to thread and re-thread common compression nuts each time atubing connection is made.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.FeaturesPolypropylene materialEPDM o-ringColder thumb latchIntegral terminationsBenefitsChemically resistant and gammasterilizableGreater chemical resistanceOne-hand connection anddisconnectionFewer leak points, shorter assemblies,faster installations20
These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for 1/8" Flow PMC12 CouplingsPMC12 PMCD12 PMC12 PMCD12 PMC12 PMCD12 PMC12 PMCD12 PMC12 PMCD12 PMC12 PMCD12 PMC12 PMC12 PMC12 PMCD12 PMC12 PMCD12 PMC12 PMCD12BODIES20042004 2006 2006 2202 2202 2204 2204 2402 2402 2404 2404 2602 2304 2104 2304 2203 2203 2201 2201PMC100212 .40 .18 .50 .19 .25 .16 .50 .19 .50 .20 .51 .19 .50 .50 .38 .24 .30 .17 .03 .03PMCD100212 .27 .18 .31 .18 .24 .16 .28 .20 .26 .20 .29 .18 .26 .26 .27 .24 .25 .17 .03 .03PMC100412 .40 .21 .50 .24 .26 .18 .50 .24 .50 .20 .51 .24 .50 .50 .38 .26 .30 .19 .03 .03PMCD100412 .29 .19 .32 .23 .25 .17 .30 .23 .27 .21 .28 .23 .27 .28 .29 .24 .25 .18 .03 .03PMC120412 .40 .18 .50 .18 .25 .16 .40 .18 .40 .16 .36 .18 .40 .40 .38 .21 .30 .17 .03 .03PMCD120412 .21 .17 .22 .17 .20 .16 .22 .17 .21 .17 .20 .17 .21 .22 .21 .18 .21 .16 .03 .03PMC160212 .23 .15 .28 .18 .19 .14 .27 .15 .27 .15 .28 .18 .27 .27 .23 .16 .20 .14 .03 .03PMCD160212 .19 .15 .19 .15 .17 .14 .19 .15 .18 .15 .18 .15 .18 .19 .19 .15 .18 .14 .03 .03DID YOU KNOW ...You can prevent misconnections and crossed lines to help protect peopleand equipment? One method of preventing tubing or line misconnectionis by combining different sizes of standard couplings to make correct lineconnections obvious to users. The following guidelines can help:PMC12 SERIES Use one APC coupling and one PLC coupling. Use one MC/PMC size and one LC/PLC size. Use one panel mount body and one panel mount insert. Use Multi-Mount couplings (connect 3-5 lines simultaneously).| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.21
Product DimensionsADBABA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthØ .500"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .05COUPLING INSERTS see drawing .30 .06PANEL PANELNUT HEX NUT THREAD5/8 1/2-24UNFCoupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT PMC100212 PMCD100212 .88 1.001/8" BSPT PMC100212BSPT PMCD100212BSPT .88 1.001/4" NPT PMC100412 PMCD100412 .88 1.101/4" BSPT PMC100412BSPT PMCD100412BSPT .88 1.10TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC120412 PMCD120412 .79 1.72PMC12 SERIESTERMINATIONPANEL MOUNTHOSE BARBTERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC160112 PMCD160112 .88 1.401/8" ID 3.2mm ID PMC160212 PMCD160212 .88 1.651/4" ID 6.4mm ID PMC160412 PMCD160412 .88 1.85TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC130412 PMCD130412 .89 1.74TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC170112 PMCD170112 .89 1.421/8" ID 3.2mm ID PMC170212 PMCD170212 .89 1.671/4" ID 6.4mm ID PMC170412 PMCD170412 .89 1.87PMC12 1/4-28 Coupling BodiesTERMINATIONPANEL MOUNTWITH A 1/4-28 FLATBOTTOM PORTTERMINATIONIN-LINEWITH A 1/4-28 FLATBOTTOM PORTSHUTOFF A BPMCD18042812 0.88 1.57SHUTOFF A BPMCD19042812 0.89 1.57All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations donot require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc.22| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT PMC240212 PMCD240212 .58 1.03/1.45TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC200412 PMCD200412 .58 1.15/1.58TERMINATIONIN-LINEHOSE BARBTERMINATIONELBOWFERRULELESSPOLYTUBEFITTING, PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/16" ID 1.6mm ID PMC220112 PMCD220112 .50 .80/1.471/8" ID 3.2mm ID PMC220212 PMCD220212 .50 1.05/1.671/4" ID 6.4mm ID PMC220412 PMCD220412 .50 1.20/1.71TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D5/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMC2102512 PMCD2102512 .50 1.09/1.21 .771/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMC210412 PMCD210412 .50 1.17/1.21 .77non-valved shownTERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/8" ID 3.2mm ID PMC230212 PMCD230212 .50 1.09/1.21 .691/4" ID 6.4mm ID PMC230412 PMCD230412 .50 1.09/1.21 .90PMC12 1/4-28 Coupling InsertsTERMINATIONIN-LINEWITH 1/4-28 UNFTHREADSTERMINATIONPANEL MOUNTWITH A 1/4-28FLAT BOTTOMPORTSTRAIGHT THRU SHUTOFF A BPMC24042812 PMCD24042812 .50 1.48SHUTOFF A BPMCD48042812 .72 1.55NutsPMC12 SERIESTUBING SIZE DESCRIPTION PART NUMBER1/16" and 1.8mm 1/4-28 Polypropylene Nut (natural) 24189001/8" and 3mm 1/4-28 Polypropylene Nut (natural) 24190001/16" and 1.8mm 1/4-28 Acetal Nut (black) 24191991/8" and 3mm 1/4-28 Acetal Nut (black) 2419299FerrulesTUBING SIZE DESCRIPTION PART NUMBER1/16" Ferrule, ETFE (blue) 24193001/8" Ferrule, ETFE (yellow) 24194001.8mm Ferrule, ETFE (green) 24195003.0mm Ferrule, ETFE (orange) 2419600All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semirigidtubing, i.e., polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.23
Actual sizeMC SERIES<strong>Specifications</strong>Pressure: Vacuum to 250 psi, 17.3 barTemperature:-40°F to 180°F (-40°C to 82°C)(High temperature versions available with ratingsto 400°F)Materials:Main components:Chrome-plated brassThumb latch: Stainless steelValves: AcetalValve spring: 316 stainless steelExternal springs and pin: Stainless steelO-rings: Buna-NFinish: ChromeTubing Sizes:1/8" to 1/4" ID, 3.2mm to 6.4mm IDColder’s MC Series chrome-plated brasscouplings are built tough and made to last in the mostdemanding applications. Ideal for use with highertemperatures or pressures, MC Series couplings featureone-hand operation for swift and easy connects anddisconnects. These couplings offer the flexibility of multipleconfigurations and terminations and mate with both PMCacetal and PMC12 polypropylene couplings.WARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder’s products in their own applicationconditions.FeaturesBrass materialHigh temperature capabilityColder thumb latchCompatibleBenefitsDurable and able to withstandhigher pressure and temperatureVersions rated to 400°F (204°C)One-hand connection and disconnectionMC mates with PMC and PMC12 SeriescouplingsLiquid Flow RatesLiquid Flow Rate Information for CouplingsMC SERIESThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.C VValues for 1/8" Flow MC CouplingsQ=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidMC12 MCD12 MC12 MCD12 MC12 MCD12 MC12 MCD12 MC12 MCD12 MC12 MCD12 MC12 MC12 MC12 MCD12 MC12 MCD12BODIES 2004 2004 2006 2006 2202 2202 2204 2204 2402 2402 2404 2404 2602 2304 2104 2304 2203 2203MC100212 .40 .18 .50 .19 .25 .16 .50 .19 .50 .20 .51 .19 .50 .50 .38 .24 .30 .17MCD100212 .27 .18 .31 .18 .24 .16 .28 .20 .26 .20 .29 .18 .26 .26 .27 .24 .25 .17MC100412 .40 .21 .50 .24 .26 .18 .50 .24 .50 .20 .51 .24 .50 .50 .38 .26 .30 .19MCD100412 .29 .19 .32 .23 .25 .17 .30 .23 .27 .21 .28 .23 .27 .28 .29 .24 .25 .183MC120412 .40 .18 .50 .18 .25 .16 .40 .18 .40 .16 .36 .18 .40 .40 .38 .21 .30 .17324MCD120412 .21.17.22.17.20.16.22.17.21.17.20.17.21.22.21.18.21.16MC160212 .23 .15 .28 .18 .19 .14 .27 .15 .27 .15 .28 .18 .27 .27 .23 .16 .20 .14
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.DID YOU KNOW ...Colder’s MC Series couplings are also availablein keyed, color-coded versions? Specificallydesigned for applications requiring foolproofconnections and non-interchangeable lines,these couplings are a durable and attractivesolution for high-volume applications.Contact Colder for more information.Nu-Seal<strong>Specifications</strong>Pressure:Vacuum to 20 psi, 1.4 barMaterials:Main components:Low density polyethyleneColor:TranslucentTubing Size:1/8" ID, 3.2mm IDNu-Seal quick disconnect couplinginserts feature a patented integral seal and are USP ClassVI compliant. These economic inserts are ideal for applicationsthat require limited connect/disconnect cycles.FeaturesPatented integral sealLow density polyethyleneChemically resistantCompatibleBenefitsEconomical, allows for disposabilityand provides leak-free connectionsSterilizable by Et0, E-beam & gammaWorks in many critical USP Class VImaterial applicationsMates with MC, PMC, PMC12 couplingsMC SERIES| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.25
Product DimensionsADBBAØ .500"+.010PANEL MAX. PANEL MIN. PANEL-.000OPENING THICKNESS THICKNESSCOUPLING BODIES(except male thread) see drawing .50 .05MALE THREAD see drawing .21 .05COUPLING INSERTSsee drawing .30 .05A = Height/DiameterB = Total Length (including valve)D =Elbow Radial LengthPANEL PANELNUT HEX NUT THREAD5/8 1/2-24UNFCoupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT MC1002 MCD1002 .76 1.001/8" BSPT MC1002BSPT MCD1002BSPT .76 1.001/4" NPT MC1004 MCD1004 .76 1.101/4" BSPT MC1004BSPT MCD1004BSPT .76 1.10TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B5/32" OD, .10" ID 4.0mm OD, 2.5mm ID MC12025 MCD12025 .76 1.671/4" OD, .17" ID 6.4mm OD, 4.3mm ID MC1204 MCD1204 .76 1.77TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONPANEL MOUNTFEMALE THREADTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID MC1602 MCD1602 .76 1.673/16" ID 4.8mm ID MC1603 MCD1603 .76 1.891/4" ID 6.4mm ID MC1604 MCD1604 .76 1.89THREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF MC181032 MCD181032 .76 1.22TERMINATIONPANEL MOUNTMALE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT MC1502 MCD1502 .76 1.20MC SERIESTERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID MC1304 MCD1304 .76 1.77TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID MC1702 MCD1702 .76 1.673/16" ID 4.8mm ID MC1703 MCD1703 .76 1.891/4" ID 6.4mm ID MC1704 MCD1704 .76 1.89All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do notrequire ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc. NOTE: Elbowconfigurations are available. Contact Colder for more information.26| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT MC2402 MCD2402 .58 1.03/1.431/8" BSPT MC2402BSPT MCD2402BSPT .58/.72 1.03/1.431/4" NPT MC2404 MCD2404 .65 1.08/1.43THREAD SIZE STRAIGHT THRU SHUTOFF A B1/8" NPT Female MC2602 MCD2602 .58 .95/1.651/4" NPT Female MC2604 MCD2604 .72 1.15/1.821/4" BSPP Female MC2604BSPP MCD2604BSPP .72 1.23/1.91non-valved show nTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID MC4004 MCD4004 .72 1.75/1.85TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID MC4202 MCD4202 .72 1.65/1.753/16" ID 4.8mm ID MC4203 MCD4203 .72 1.87/1.971/4" ID 6.4mm ID MC4204 MCD4204 .72 1.87/1.97TERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B5/32" OD, .10" ID 4.0mm OD, 2.5mm ID MC20025 MCD20025 .58 1.13/1.531/4" OD, .17" ID 6.4mm OD, 4.3mm ID MC2004 MCD2004 .58 1.15/1.553/8" OD, .25" ID 9.5mm OD, 6.4mm ID MC2006 MCD2006 .58 1.30/1.50TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID MC2202 MCD2202 .58 1.05/1.653/16" ID 4.8mm ID MC2203 MCD2203 .58 1.25/1.851/4" ID 6.4mm ID MC2204 MCD2204 .58 1.25/1.67TERMINATIONIN-LINEFEMALE THREADTERMINATIONELBOWFERRULELESSPOLYTUBE FITTING,PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF MC281032 MCD281032 .58 .63/1.30TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D5/32" OD, .10" ID 4.0mm OD, 2.5mm ID MC21025 MCD21025 .63 1.18/1.28 .811/4" OD, .17" ID 6.4mm OD, 4.3mm ID MC2104 MCD2104 .63 1.18/1.28 .83TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/8" ID 3.2mm ID MC2302 MCD2302 .62 1.18/1.28 .761/4" ID 6.4mm ID MC2304 MCD2304 .63 1.18/1.28 .76TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. PART NO. A B1/8" ID 3.2 mm ID DSM2202 .50 .98Nu-Seal DisposableCoupling InsertsMC SERIESCoupling bodies must have integral terminations to be compatible.All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTF fittings are designed for semirigidtubing, i.e., polyethylene, nylon, polyurethane, etc. NOTE: Elbow configurations are available. Contact Colder for more information.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.27
NS212 SERIESActual sizePatentedNS212 SERIES<strong>Specifications</strong>Pressure: Vacuum to 45 psi, 3.1 barTemperature: 32°F to 120°F (0°C to 49°C)Materials:Main components and valves:Glass-filled polypropyleneValve spring: 316 stainless steelSeal material: EPDM (FKM/Simriz ® FFKM optional)Color: Gray with black accent standardTubing Sizes:1/8" and 1/4" ID, 3.2mm and 6.4mm IDSpillage:
Product DimensionsAABA = Height/DiameterB = Total LengthBØ .688"+.010PANEL MAX. PANEL MIN. PANEL-.000OPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .30 .050Coupling BodiesNS212 SERIESTERMINATIONIN-LINEPIPE THREADTHREAD SHUTOFF A B1/8" NPT NS2D100212 .71 1.74TERMINATIONIN-LINEFERRULESSPOLYTUBE FITTING,PTF†TUBING SIZE METRIC EQ. SHUTOFF A B1/4" OD, .17 ID 6.4mm OD, 4.3mm ID NS2D130412 .71 1.87TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/8" ID 3.2mm ID NS2D170212 .71 1.871/4" ID 6.4mm ID NS2D170412 .71 2.05TERMINATIONPANEL MOUNTFERRULESSPOLYTUBE FITTING,PTF†TUBING SIZE METRIC EQ. SHUTOFF A B1/4" OD, .17 ID 6.4mm OD, 4.3mm ID NS2D120412 .88 1.87TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/8" ID 3.2mm ID NS2D160212 .88 1.791/4" ID 6.4mm ID NS2D160412 .88 2.05Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEFERRULESSPOLYTUBE FITTING,PTF†THREAD SHUTOFF A B1/8" NPT NS2D240212 .64 1.27TUBING SIZE METRIC EQ. SHUTOFF A B1/4" OD, .17 ID 6.4mm OD, 4.3mm ID NS2D200412 .64 1.39TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/8" ID 3.2mm ID NS2D220212 .64 1.321/4" ID 6.4mm ID NS2D220412 .64 1.52AccessoriesPANEL MOUNTGASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies listed above Buna-N 1830300All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon,polyurethane, etc. †NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.29
Actual sizePLC SERIES<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:-40°F to 180°(-40°C to 82°C)Materials:Main components and valves: AcetalThumb latch: Stainless steelValve spring: 316 stainless steelExternal springs and pin: Stainless steelO-rings: Buna-NColor: Natural white, others availableTubing Sizes:1/4" to 3/8" ID, 6.4mm to 9.5mm IDPLC SERIESThe 1/4" flow PLC Series is provenworldwide in thousands of applications and offers thewidest selection of sizes and configurations. PLC couplingsare injection molded from acetal thermoplastic and areresistant to most mild chemical solutions. One-handconnection/disconnection, plus integral terminations makethe PLC Series the choice for ease of use and manufacture.The PLC Series is also available with optional RFID (RadioFrequency Identification) capability.JG ® Tubing <strong>Specifications</strong>:Tube tolerances: 1/4" OD, +0.001/-0.004 | 3/8" OD, +0.001/-0.004Tube Types: Plastic tube: Polyethylene, nylon, polyurethane. For soft orthin wall tubing with JG ® terminations, tube supports are recommended.Metal tube: Brass, copper and mild steelFeaturesColder thumb latchIntegral terminationsClicks when connectedCompatibleBenefitsOne-hand connection and disconnectionFewer leak points, shorter assemblies,faster installationsAssurance of a reliable connectionMates with LC Series couplingsLiquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for 1/4" Flow PLC CouplingsPLC PLCD PLC PLCD PLC PLCD PLC PLCD PLC PLCD PLC PLCD PLCBODIES 20004 20004 20006 20006 22004 22004 22006 22006 24004 24004 24006 24006 26004PLC10004 .40 .36 1.05 .58 .83 .56 1.40 .82 1.40 .75 1.40 .77 .83PLCD10004 .36 .31 .73 .48 .66 .41 .82 .50 .80 .45 .77 .45 .81PLC10006 .40 .36 1.05 .60 .83 .56 1.40 .81 1.40 .76 1.40 .76 .83PLCD10006 .37 .31 .81 .47 .70 .43 1.02 .51 .98 .46 .99 .48 .98PLC12006 .38 .36 .84 .63 .74 .56 1.14 .75 1.14 .70 1.14 .72 .74PLCD12006 .38 .33 .78 .49 .68 .44 .84 .49 .81 .43 .82 .44 .81PLC16004 .38 .37 .87 .54 .95 .51 1.00 .70 .95 .64 1.00 .66 .95PLCD16004 .37 .31 .61 .44 .57 .41 .78 .44 .78 .43 .75 .46 .78PLC16006 .38 .37 1.00 .57 .95 .53 1.40 .80 1.40 .71 1.40 .73 1.40PLCD16006 .38 .32 .71 .49 .63 .42 .89 .51 .96 .45 .92 .49 .9730
These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.RFID<strong>Specifications</strong>RF CommunicationRange:Approximately 1"OperatingVoltage:8-24V standardPowerConsumption:1.2W MaximumCommunication:ASCII RS-232 (DB-9),USBI-Code RFID Tags:13.56 MHzISO-15693 - 112 bytesprogrammableThe IdentiQuik ® Series ofsmart couplings are RFID enabled couplingsused on equipment and in processes. RFIDis an identification method that relies onremotely writing and reading data. Smartcoupling applications include: inventorylevel meters, surgical tool identification,product protection and many more.NOTE: RFID tags not approved for e-beam or gammasterilization.Operating Temperature:32°F to 150°F (0°C to 66°C)PatentedCoupling ReadersTERMINATIONIN-LINEHOSE BARBCoupling InsertsTERMINATIONIN-LINEHOSE BARBTERMINATIONELBOWHOSE BARBSMART COUPLINGS WITH RFIDIdentiQuik PLC SeriesIdentify misconnections: eliminate out-of-sequenceconnections or misconnections due to operator errorProtect your brand: prevent out-of-date, incorrect ormisapplied products from being usedProlong equipment life: prevent the accidental orunintentional use of harmful mediaSave time: automatic documentation of package andmedia lot numbers, date codes and moreProduct Dimensions (See drawing on page 32)TUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID iPLCDR1700403 1.39 2.773/8" ID 9.5mm ID iPLCDR1700603 1.39 2.76TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID iPLCT2200403 iPLCDT2200403 1.00 1.38/2.053/8" ID 9.5mm ID iPLCT2200603 iPLCDT2200603 1.05 1.73/1.86TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID iPLCT2300403 iPLCDT2300403 1.48 1.27/1.403/8" ID 9.5mm ID iPLCT2300603 iPLCDT2300403 1.48 1.33/1.46All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: I-Code SL1 tags are available for existing applications, contact the factory for assistance.PLC SERIESMaterials are listed on page 30.Customized parts (materials, voltage,termination, cable length, etc.) available.Call for more information.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.31
Product DimensionsADBABA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthØ .688"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .05COUPLING INSERTS see drawing .30 .05PANEL PANELNUT HEX NUT THREAD13/16 11/16-24UNEFCoupling BodiesPLC SERIESTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT PLC10004 PLCD10004 .90 1.171/4" BSPT PLC10004BSPT PLCD10004BSPT .90 1.153/8" NPT PLC10006 PLCD10006 .90 1.153/8" BSPT PLC10006BSPT PLCD10006BSPT .90 1.15TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLC12004 PLCD12004 .88 1.878.0mm OD, 6.0mm ID PLC120M8 PLCD120M8 .88 1.953/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLC12006 PLCD12006 .88 1.9510.0mm OD, 8.0mm ID PLC120M10 PLCD120M10 .88 1.95TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONPANEL MOUNTJG ® PUSH-TO-CONNECTTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC16004 PLCD16004 .88 1.955/16" ID 7.9mm ID PLC16005 PLCD16005 .88 1.953/8" ID 9.5mm ID PLC16006 PLCD16006 .88 1.95TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD 6.4mm OD PLC11004 PLCD11004 .88 1.95TERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLC13004 PLCD13004 .94 1.828.0mm OD, 6.0mm ID PLC130M8 PLCD130M8 .94 1.953/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLC13006 PLCD13006 .94 1.9510.0mm OD, 8.0mm ID PLC130M10 PLCD130M10 .94 1.95TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC17004 PLCD17004 .94 1.80 /1.955/16" ID 7.9mm ID PLC17005 PLCD17005 .94 1.953/8" ID 9.5mm ID PLC17006 PLCD17006 .94 1.80 /1.95TERMINATIONIN-LINEJG ® PUSH-TO-CONNECTTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD 6.4mm OD PLC14004 PLCD14004 .94 1.953/8" OD 9.5mm OD PLC14006 PLCD14006 .94 2.09(See page 130 for JG accessories)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless Polytube Fitting terminations do notrequire ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc. NOTE: JGis a registered trademark of John Guest USA, Inc.32| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT PLC24004 PLCD24004 .72 1.25/1.661/4" BSPT PLC24004BSPT PLCD24004BSPT .72 1.53/1.663/8" NPT PLC24006 PLCD24006 .87 1.25/1.633/8" BSPT PLC24006BSPT PLCD24006BSPT .87 1.51/1.63TERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLC40004 PLCD40004 .94 1.78/1.918.0mm OD, 6.0mm ID PLC400M8 PLCD400M8 .94 1.91/2.033/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLC40006 PLCD40006 .94 1.91/2.0510.0mm OD, 8.0mm ID PLC400M10 PLCD400M10 .94 1.91/2.05TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC42004 PLCD42004 .94 1.91/2.055/16" ID 7.9mm ID PLC42005 PLCD42005 .94 1.91/2.053/8" ID 9.5mm ID PLC42006 PLCD42006 .94 1.91/2.05TERMINATIONPANEL MOUNTJG ® PUSH-TO-CONNECTTERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD 6.4mm OD PLC41004 PLCD41004 .94 1.91/2.05TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLC20004 PLCD20004 .72 1.25/1.888.0mm OD, 6.0mm ID PLC200M8 PLCD200M8 .72 1.38/1.823/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLC20006 PLCD20006 .72 1.38/1.8210.0mm OD, 8.0mm ID PLC200M10 PLCD200M10 .72 1.38/1.82non-valved shownPLC SERIESTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC22004 PLCD22004 .62 1.35/1.995/16" ID 7.9mm ID PLC22005 PLCD22005 .62 1.35/1.993/8" ID 9.5mm ID PLC22006 PLCD22006 .62 1.36/1.81TERMINATIONIN-LINEJG ® PUSH-TO-CONNECTTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD 6.4mm OD PLC29004 PLCD29004 .63 1.35/1.953/8" OD 9.5mm OD PLC29006 PLCD29006 .78 1.51/2.11TERMINATIONELBOWFERRULELESSPOLYTUBEFITTING,PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D3/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLC21006 PLCD21006 .61/.62 1.22/1.35 .85/.96TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" ID 6.4mm ID PLC23004 PLCD23004 .67/.63 1.10/1.28 .85/.963/8" ID 9.5mm ID PLC23006 PLCD23006 .67/.63 1.25/1.28 .90/.96non-valved shownDID YOU KNOW ...Colder couplings are available in CUSTOM colors. Acetal products can be dyed or molded in variouscolors and polypropylene can be molded in the color of your choice. Minimum quantities do apply;please contact Customer Service at 1-800-444-2474 or 651-645-0091 for more information.All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigidtubing, i.e., polyethylene, nylon, polyurethane, etc. NOTE: JG is a registered trademark of John Guest USA, Inc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.33
PatentedActual sizePLC12 SERIES<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:32°F to 160°F (0°C to 71°C)Materials:Main components and valves:PolypropyleneThumb latch: Stainless steelValve spring: 316 stainless steelExternal springs and pin: Stainless steelO-rings: EPDMSterilization:Gamma: Up to 50 kGy irradiationColor:AlmondTubing Sizes:1/4" to 3/8" ID, 6.4mm to 9.5mm IDThe 1/4" flow polypropylene PLC12offers many of the same configuration options as thePLC. The polypropylene material adds greater chemicalresistance for more demanding applications. PLC12couplings are also gamma sterilizable.WARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibility totest the suitability of Colder’s products in their own application conditions.Use the graph at the right as a guide.PLC12 SERIESFeaturesPolypropylene materialEPDM o-ringsColder thumb latchIntegral terminationsBenefitsChemically resistant and gamma sterilizableGreater chemical resistanceOne-hand connection and disconnectionFewer leak points, shorter assemblies, fasterinstallationsLiquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for 1/4" Flow PLC12 CouplingsPLC PLCD PLC PLCD PLC PLCD PLC PLCD PLC PLCD PLC PLCD PLCBODIES 20004 20004 20006 20006 22004 22004 22006 22006 24004 24004 24006 24006 26004PLC1000412 .40 .36 1.05 .58 .83 .56 1.40 .82 1.40 .75 1.40 .77 .83PLCD1000412 .36 .31 .73 .48 .66 .41 .82 .50 .80 .45 .77 .45 .81PLC1000612 .40 .36 1.05 .60 .83 .56 1.40 .81 1.40 .76 1.40 .76 .83PLCD1000612 .37 .31 .81 .47 .70 .43 1.02 .51 .98 .46 .99 .48 .98PLC1200612 .38 .36 .84 .63 .74 .56 1.14 .75 1.14 .70 1.14 .72 .74PLCD1200612 .38 .33 .78 .49 .68 .44 .84 .49 .81 .43 .82 .44 .81PLC1600412 .38 .37 .87 .54 .95 .51 1.00 .70 .95 .64 1.00 .66 .95PLCD1600412 .37 .31 .61 .44 .57 .41 .78 .44 .78 .43 .75 .46 .78PLC1600612 .38 .37 1.00 .57 .95 .53 1.40 .80 1.40 .71 1.40 .73 1.40PLCD1600612 .38 .32 .71 .49 .63 .42 .89 .51 .96 .45 .92 .49 .9734
These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.RFID<strong>Specifications</strong>RF CommunicationRange:Approximately 1"OperatingVoltage:8-24V standardPowerConsumption:1.2W MaximumCommunication:ASCII RS-232 (DB-9),USBI-Code RFID Tags:13.56 MHzISO-15693 - 112 bytesprogrammableNOTE: RFID tags not approved fore-beam or gamma sterilization.The IdentiQuik ® Series ofsmart couplings are RFID enabled couplingsused on equipment and in processes. RFIDis an automatic identification method thatrelies on remotely writing and readingdata. Smart coupling applications include:inventory level meters, medical equipmentcalibration, product protection, and manymore.Operating Temperature:32°F to 150°F (0°C to 65°C)PatentedCoupling ReadersCoupling Insertsnon-valved shownSMART COUPLINGS WITH RFIDIdentiQuik PLC SeriesIdentify misconnections: eliminate out-of-sequenceconnections or misconnections due to operator errorProtect your brand: prevent out-of-date, incorrect ormisapplied products from being usedProlong equipment life: prevent the accidental orunintentional use of harmful mediaSave time: automatic documentation of package andmedia lot numbers, date codes and moreProduct Dimensions(See drawing on page 36)TERMINATION TUBING SIZE METRIC EQ. SHUTOFF A BIN-LINE 1/4" ID 6.4mm ID iPLCDR1700400 1.39 2.78HOSE BARB 3/8" ID 9.5mm ID iPLCDR1700600 1.39 2.78TERMINATION TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A BIN-LINE 1/4" ID 6.4mm ID iPLCT2200400 iPLCDT2200400 1.00 1.38/2.05HOSE BARB 3/8" ID 9.5mm ID iPLCT2200600 iPLCDT2200600 1.05 1.74/1.87TERMINATION TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A BELBOW 1/4" ID 6.4mm ID iPLCT2300400 iPLCDT2300400 1.48 1.27/1.40HOSE BARB 3/8" ID 9.5mm ID iPLCT2300600 iPLCDT2300600 1.48 1.33/1.46All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: I-Code SL1 tags are available for existing applications, contact the factory for assistance.PLC12 SERIESMaterials are listed on page 34.Customized parts (materials, voltage,termination, cable length, etc.)available. Call for more information.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.35
Product DimensionsDABBAØ .688"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .30 .02COUPLING INSERTS see drawing .30 .02A = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthPANEL PANELNUT HEX NUT THREAD13/16 11/16-24UNEFCoupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBEFITTING, PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT PLC1000412 PLCD1000412 1.00 1.151/4” BSPT PLC1000412BSPT PLCD1000412BSPT 1.00 1.153/8" NPT PLC1000612 PLCD1000612 1.00 1.153/8” BSPT PLC1000612BSPT PLCD1000612BSPT 1.00 1.15TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLC1200612 PLCD1200612 1.00 1.95PLC12 SERIESTERMINATIONPANEL MOUNTHOSE BARBTERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINESOFTUBEFITTINGTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC1600412 PLCD1600412 1.00 1.953/8" ID 9.5mm ID PLC1600612 PLCD1600612 1.00 1.95TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLC1300612 PLCD1300612 1.02 1.96TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC1700412 PLCD1700412 1.02 1.963/8" ID 9.5mm ID PLC1700612 PLCD1700612 1.02 1.96TUBING SIZE METRIC EQ. SHUTOFF A B3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLCD17040612 1.02 2.201/2" OD, 3/8" ID 12.7mm OD, 9.5mm ID PLCD17060812 1.02 2.36All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless Polytube Fitting terminations do notrequire ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed d for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc.36| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT PLC2400412 PLCD2400412 .72 1.26/1.67TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC4200412 PLCD4200412 .94 1.91/2.053/8" ID 9.5mm ID PLC4200612 PLCD4200612 .94 1.91/2.05TERMINATIONIN-LINEFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLC2000612 PLCD2000612 .72 1.68/1.82TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID PLC2200412 PLCD2200412 .63 1.35/2.003/8" ID 9.5mm ID PLC2200612 PLCD2200612 .63 1.35/1.82non-valved shownTERMINATIONIN-LINESOFTUBEFITTINGTUBING SIZE METRIC EQ. SHUTOFF A B3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLCD22040612 .72 2.231/2" OD, 3/8" ID 12.7mm OD, 9.5mm ID PLCD22060812 .72 2.18TERMINATIONELBOWFERRULELESSPOLYTUBEFITTING, PTF†TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D3/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID PLC2100612 PLCD2100612 .61/.62 1.29/1.36 .95TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" ID 6.4mm ID PLC2300412 PLCD2300412 .63 1.22/1.36 .963/8" ID 9.5mm ID PLC2300612 PLCD2300612 .63 1.28/1.42 .96PLC12 SERIESDID YOU KNOW ...Many of Colder's general purpose couplings and fittings can be usedacross a wide variety of markets and applications?Quick tip: use the Chemical Compatibility Table at www.colder.com tohelp determine which product is best for your fluid handling application.All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigidtubing, i.e., polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.37
LC SERIES<strong>Specifications</strong>Pressure: Vacuum to 250 psi, 17.3 barTemperature:-40°F to 180°F (-40°C to 82°C)(High temperature versions available with ratingsto 400°F)Materials:Main components: Chrome-plated brassThumb latch: Stainless steelValves: AcetalValve springs: 316 stainless steelExternal springs and pin: Stainless steelO-rings: Buna-NFinish: ChromeTubing Sizes:1/4" to 3/8" ID, 6.4mm to 9.5mm IDActual sizeWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder’s products in their own applicationconditions.LC SERIESColder’s LC Series chrome-plated brass couplings arebuilt tough and made to last in the most demanding applications. Ideal foruse with higher temperature or pressure , the LC Series features a one-handoperation for swift and easy connects and disconnects. These couplings offerthe flexibility of multiple configurations and terminations to mate with both thePLC acetal and PLC12 polypropylene couplings.FeaturesBrass materialChrome platingHigh temperature capabilityColder thumb latchCompatibleBenefitsDurable construction withstandshigher pressure and temperatureAttractive appearanceVersions rated to 400°F (204°C)One-hand connection and disconnectionLC mates with PLC Series couplings38
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for 1/4" Flow LC CouplingsLC LCD LC LCD LC LCD LC LCD LC LCD LC LCD LCBODIES 20004 20004 20006 20006 22004 22004 22006 22006 24004 24004 24006 24006 26004LC10004 .40 .36 1.05 .58 .83 .56 1.40 .82 1.40 .75 1.40 .77 .83LCD10004 .36 .31 .73 .48 .66 .41 .82 .50 .80 .45 .77 .45 .81LC10006 .40 .36 1.05 .60 .83 .56 1.40 .81 1.40 .76 1.40 .76 .83LCD10006 .37 .31 .81 .47 .70 .43 1.02 .51 .98 .46 .99 .48 .98LC12006 .38 .36 .84 .63 .74 .56 1.14 .75 1.14 .70 1.14 .72 .74LCD12006 .38 .33 .78 .49 .68 .44 .84 .49 .81 .43 .82 .44 .81LC16004 .38 .37 .87 .54 .95 .51 1.00 .70 .95 .64 1.00 .66 .95LCD16004 .37 .31 .61 .44 .57 .41 .78 .44 .78 .43 .75 .46 .78LC16006 .38 .37 1.00 .57 .95 .53 1.40 .80 1.40 .71 1.40 .73 1.40LCD16006 .38 .32 .71 .49 .63 .42 .89 .51 .96 .45 .92 .49 .97DID YOU KNOW ...O-ring selection is a key decision when determining which connector will perform best inyour specific application. It’s important that you understand the material characteristicsand how they can be affected by both the media being transferred and the environmentin which the connector is being used:Buna-N is the most common o-ring seal due to itssolvent, oil and water resistance. Temperature rangeof -30°to 250°F.FKM is best suited for applications where chemicalresistance and/or high temperatures are arequirement. The temperature range is -15°to 400°F.EPDM has excellent resistance to polar solvents.This o-ring is not compatible with petroleum. Thetemperature range is -70°to 300°F.Food-grade material is used when food is beingtransferred through the connector.Silicone seals have good temperature resistance. Thetemperature range is -70°to 400°and with specialcompounds can reach 175°to 450°F. Silicone can alsobe supplied with Class VI requirements for medical/bioprocessing applications.LC SERIESFor further information about which o-ring material is best for your application pleasecontact Customer Service at 1-800-444-2474 or 651-645-0091.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.39
Product DimensionsADAØ .688"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .05COUPLING INSERTS see drawing .090 .300BBA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthPANEL PANELNUT HEX NUT THREAD13/16 11/16-24 UNFCoupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT LC10004 LCD10004 .88 1.151/4" BSPT LC10004BSPT LCD10004BSPT .88 1.153/8" NPT LC10006 LCD10006 .88 1.153/8" BSPT LC10006BSPT LCD10006BSPT .88 1.15TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID LC12004 LCD12004 .88 1.873/8" OD, .25" ID 9.5mm OD, 6.4mm ID LC12006 LCD12006 .88 2.00TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONPANEL MOUNTMALE THREADTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID LC16004 LCD16004 .88 2.005/16" ID 7.9mm ID LC16005 LCD16005 .88 2.003/8" ID 9.5mm ID LC16006 LCD16006 .88 2.00THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT LC15004 LCD15004 .88 1.50TERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID LC13004 LCD13004 .88 1.873/8" OD, .25" ID 9.5mm OD, 6.4mm ID LC13006 LCD13006 .88 2.00TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID LC17004 LCD17004 .88 2.005/16" ID 7.9mm ID LC17005 LCD17005 .88 2.003/8" ID 9.5mm ID LC17006 LCD17006 .88 2.00LC SERIESAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless Polytube Fitting terminations do notrequire ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc.40| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT LC24004 LCD24004 .72 1.25/1.681/4" BSPT LC24004BSPT LCD24004BSPT .72 1.25/1.683/8" NPT LC24006 LCD24006 .87 1.25/1.553/8" BSPT LC24006BSPT LCD24006BSPT .87 1.25/1.55THREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT Female LC26004 LCD26004 .72 1.25/1.901/4" BSPP Female LC26004BSPP LCD26004BSPP .72 1.25/1.75TERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID LC40004 LCD40004 .94 1.83/1.983/8" OD, .25" ID 9.5mm OD, 6.4mm ID LC40006 LCD40006 .94 1.96/2.11TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID LC42004 LCD42004 .94 1.96/2.115/16" ID 7.9mm ID LC42005 LCD42005 .94 1.96/2.113/8" ID 9.5mm ID LC42006 LCD42006 .94 1.96/2.11TERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID LC20004 LCD20004 .72 1.25/1.873/8" OD, .25" ID 9.5mm OD, 6.4mm ID LC20006 LCD20006 .72 1.38/1.83TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID LC22004 LCD22004 .63 1.35/2.005/16" ID 7.9mm ID LC22005 LCD22005 .63 1.35/1.853/8" ID 9.5mm ID LC22006 LCD22006 .63 1.35/1.83TERMINATIONELBOWFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" OD, .17" ID 6.4mm OD, 4.3mm ID LC21004 LCD21004 .63 1.28/1.43 .963/8" OD, .25" ID 9.5mm OD, 6.4mm ID LC21006 LCD21006 .63 1.28/1.43 .83TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" ID 6.4mm ID LC23004 LCD23004 .63/.62 1.28/1.43 1.283/8" ID 9.5mm ID LC23006 LCD23006 .63/.62 1.28/1.43 1.28DID YOU KNOW ...LC Series couplings can mate withPLC and PLC12 plastic couplings?See pages 30-37 for moreinformation.LC SERIESAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless l otherwise noted.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigidtubing, i.e., polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.41
APC SERIES<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:-40°F to 180°F (-40°C to 82°C)Materials:Main components and valves: AcetalThumb latch: AcetalValve spring: 316 stainless steelExternal spring: 302 stainless steelO-rings: Buna-NColor:Natural white with light gray latchTubing Sizes:1/4" to 3/8" ID, 6.4mm to 9.5mm IDAPC SERIESActual sizeWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions.The 1/4" flow APC Series couplings feature a plasticthumb latch, fewer moving parts and a smooth contoured design to deliverease-of-use and excellent flow in a compact size. The patented APC Series hasbeen expanded to include couplings with valves and thumb latch shrouds. Amore rugged design on some models adds durability to increase the APC’sapplication range.FeaturesPlastic thumb latchShrouded thumb latchIntegral terminationsCompatibilityBenefitsNo exposed metal partsProtects against accidentaldisconnectsFewer leak points, shorter assemblies,faster installationsMates with most EFC couplings42
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.C VValues for APC CouplingsQ=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidAPC APCD APC APCD APC APCD APC APCD APC APCD APC APCDBODIES 20004 20004 20006 20006 22004 22004 22006 22006 24004 24004 24006 24006APC10004 0.4 0.4 1.2 0.9 1.0 0.9 2.0 0.9 1.9 0.8 1.7 0.8APCD10004 0.4 0.4 1.0 0.7 1.0 0.7 0.8 0.7 1.2 0.6 0.8 0.6APC10006 0.4 0.4 1.2 0.9 1.2 0.7 1.8 0.9 2.0 0.9 1.7 0.8APCD10006 0.4 0.4 1.3 0.8 0.6 0.5 1.1 0.7 1.3 0.7 1.0 0.7APC13004SH 0.6 0.5 0.5 0.4 0.4 0.4 0.5 0.4 0.5 0.4 0.4 0.4APCD13004SH 0.5 0.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4APC13006SH 0.4 0.4 1.0 0.7 0.9 0.6 1.1 0.7 1.1 0.7 1.0 0.7APCD13006SH 0.4 0.4 0.8 0.6 0.7 0.5 0.8 0.6 0.9 0.6 0.8 0.6APC17004SH 0.4 0.4 0.8 0.6 1.0 0.7 0.9 0.7 0.8 0.6 0.7 0.6APCD17004SH 0.4 0.4 0.7 0.5 0.8 0.6 0.7 0.6 0.7 0.5 0.6 0.5APC17006SH 0.4 0.4 1.2 0.9 4.0 0.9 2.4 0.9 2.0 0.9 1.9 0.8APCD17006SH 0.4 0.4 1.2 0.8 1.3 0.8 1.2 0.7 1.2 0.7 1.1 0.7APC SERIESDID YOU KNOW ...The shelf life of a connector is dependent upon the connector materialsand the storage conditions. Colder manufactures quick disconnectcouplings and connections made from a variety of metal, plastic andelastomeric raw materials. In general, it is best to store any Colder productin an environment shielded from light at a temperature between 50 ºFand 90 ºF.The shelf life of Colder couplings and connections is estimated to be 3years minimum if the storage conditions comply with those shown above.NOTE: For product containing lubricated o-rings, the lubricant will dry out over time. Prior to use, itmay be advisable to re-lubricate external o-rings. For product containing silicone o-rings, if lube isallowable, use of a synthetic lube is recommended.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.43
Product DimensionsADA.657"+.010-.000Ø .688"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .02BBA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthPANEL PANELNUT HEX NUT THREAD13/16 11/16-24UNFCoupling BodiesAPC SERIESTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT APC10004 APCD10004 .93 1.401/4" BSPT APC10004BSPT APCD10004BSPT .93 1.403/8" NPT APC10006 APCD10006 .93 1.403/8" BSPT APC10006BSPT APCD10006BSPT .93 1.40TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/4" ID 6.4mm ID APC17004 .93 1.353/8" ID 9.5mm ID APC17006 .93 1.35TERMINATIONIN-LINE WITHSHROUDFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID APC13004SH APCD13004SH 1.30 1.948.0mm OD, 6.0mm ID APC130M8SH APCD130M8SH 1.30 2.073/8" OD, .25" ID 9.5mm OD, 6.4mm ID APC13006SH APCD13006SH 1.30 2.0710.0mm OD, 8.0mm ID APC130M10SH APCD130M10SH 1.30 2.07TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID APC17004SH APCD17004SH 1.30 2.073/8" ID 9.5mm ID APC17006SH APCD17006SH 1.30 2.07TERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID APC12004 APCD12004 1.03 1.978.0mm OD, 6.0mm ID APC120M8 APCD120M8 1.03 2.103/8" OD, .25" ID 9.5mm OD, 6.4mm ID APC12006 APCD12006 1.03 2.1010.0mm OD, 8.0mm ID APC120M10 APCD120M10 1.03 2.10TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID APC16004 APCD16004 1.03 2.105/16" ID 7.9mm ID APC16005 APCD16005 1.03 2.103/8" ID 9.5mm ID APC16006 APCD16006 1.03 2.10AccessoriesPANEL MOUNTGASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies listed above Buna-N 1830300All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. †NOTE: Colder’s Ferruleless Polytube Fitting terminations do notrequire ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc.44| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTHREAD SIZE STRAIGHT THRU SHUTOFF A B1/4" NPT APC24004 APCD24004 .72 1.43/1.771/4" BSPT APC24004BSPT APCD24004BSPT .72 1.63/1.773/8" NPT APC24006 APCD24006 .72 1.50/1.643/8" BSPT APC24006BSPT APCD24006BSPT .72 1.51/1.65non-valved shownTERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID APC20004 APCD20004 .72 1.86/1.998.0mm OD, 6.0mm ID APC200M8 APCD200M8 .72 1.79/1.933/8" OD, .25" ID 9.5mm OD, 6.4mm ID APC20006 APCD20006 .72 1.78/1.9110.0mm OD, 8.0mm ID APC200M10 APCD200M10 .72 1.79/1.93TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID APC22004 APCD22004 .60/.72 1.40/2.103/8" ID 9.5mm ID APC22006 APCD22006 .63/.72 1.40/1.92non-valved shownTERMINATIONELBOWFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" OD, .17" ID 6.4mm OD, 4.3mm ID APC21004 APCD21004 1.22 1.32/1.45 .913/8" OD, .25" ID 9.5mm OD, 6.4mm ID APC21006 APCD21006 1.27 1.33/1.46 .96TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" ID 6.4mm ID APC23004 APCD23004 .63 1.20/1.45 .963/8" ID 9.5mm ID APC23006 APCD23006 .63 1.20/1.50 .96non-valved shownAPC SERIESDID YOU KNOW ...One of the most versatile coupling series, the APC can be found insuch diverse applications as hospital beds and support surfaces, sportshydration equipment, cold and compression therapy and many more!This product platform is also frequently used to develop custom designs.Contact Customer Service at 1-800-444-2474 or 651-645-0091 to learnhow we can adapt the APC coupling to your specific requirements.Quick Tip: These cost-effective, high-value connectors are also availablein NSF listed versions for food and beverage dispensing. Visitwww.colder.com for equivalent NSF part numbers.All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigidtubing, i.e., polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.45
<strong>Specifications</strong>Pressure: 0 to 20 psi, 1.4 barActual sizeTemperature: 0° F to 150° F (-18° C to 66° C)Materials:Main components and valves: AcetalValve springs: 316 stainless steelO-rings: Buna-NRetention ring: PPSColor: White or blackTubing Sizes:1/4" and 3/8" ID, 6.4mm and 9.5mm IDWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder’s products in their own applicationconditions.BREAKAWAY SERIESColder’s BreakAway Series couplingsprovide safe and easy fluid transfer with protection from costly productloss and equipment damage. These high quality, leak-free connectors aredesigned to disconnect when pull force is applied without depressing alatching mechanism, allowing users to make a clean, fast and easy break atcritical moments.FeaturesReliable break-away designAutomatic dual shutoff valvesStreamlined, flush finishBenefitsRapid, automatic disconnectionSafe and clean fluid handlingEasy-to-use for maximum productivityBreakAway Disconnect ForceBreakAway Pressure RangeBreakAway Water Flow46These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of thegraphs represent the operating range of the product family, i.e., upper and lower values are shown. Therefore, depending on theexact coupling configurations selected, you can reasonably expect values to fall within the shaded area.Force to disconnect is approximately 11 pounds pull force at 0 psi line pressure and 8 pounds pull force at 20 psi. In some applicationsand with certain types of tubing, a hose clamp may be required.
Product DimensionsAABA = Height/DiameterB = Total Length (including valve)BØ .688"+.010-.000 PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .02Coupling BodiesTERMINATIONIN-LINEHOSE BARBTERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID BACD17004 0.92 2.293/8" ID 9.5mm ID BACD17006 0.92 2.29TUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID BACD16004 0.92 2.293/8" ID 9.5mm ID BACD16006 0.92 2.29TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID BACD17004MBLK 0.92 2.293/8" ID 9.5mm ID BACD17006MBLK 0.92 2.29TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID BACD16004MBLK 0.92 2.293/8" ID 9.5mm ID BACD16006MBLK 0.92 2.29TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID BAC22004 BACD22004 0.58/0.69 1.58/2.103/8" ID 9.5mm ID BACD22006 0.69 2.10Coupling InsertsBREAKAWAY SERIESTERMINATIONIN-LINEHOSE BARBMBLK = molded black material.TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID BAC22004MBLK BACD22004MBLK 0.58/0.69 1.58/2.103/8" ID 9.5mm ID BACD22006MBLK 0.69 2.10DID YOU KNOW ...BreakAway couplings can prevent costly equipment damage? Rapiddisconnection from personal cooling systems, medical therapy devicesand other equipment prevents breakage and messy spills.Visit us at www.colder.comor call 651-645-0091to get a free catalog CD or tofind your local distributor.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.47
The 9/32" flowEFC12 Seriescouplings feature a highefficiency valve design that providesa greater flow capability than any othercoupling its size. Chemically resistant polypropylenematerial makes it ideal for harsh environments.The EFC12 Series adds a bulkhead panel mount option fortight seals against tank walls and drums.Actual sizeEFC12 SERIES<strong>Specifications</strong>Pressure: Vacuum to 105 psi, 7.2 barTemperature:32°F to 160°F (0°C to 71°C)Materials:Main components and valves: PolypropyleneThumb latch: PolypropyleneValve spring: 316 stainless steelPanel mount gasket: EPDMExternal springs: 302 stainless steelO-rings: EPDMColor:Gray with dark gray latchTubing Sizes:1/4" and 3/8" ID, 6.4mm and 9.5mm IDFeaturesHigh efficiency valvePlastic thumb latchPolypropylene materialCompatibleBenefitsMore flow in a compact sizeFewer moving partsChemically resistant and gamma sterilizableMates with most APC couplingsEFC12 SERIESThese graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph representsthe operating range of the product family, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurationsselected, you can reasonably expect values to fall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling was tested with water at 70°F(21°C). To determine flow rates for specific coupling configurations use the formula below.C VValues for EFC12 CouplingsEFC EFCD EFC EFCD EFC EFCD EFC EFCD EFCD EFCDBODIES 22412 22412 22612 22612 23412 23412 23612 23612 24412 24612EFCD10412 0.51 0.51 0.51 0.51 0.50 0.45 0.50 0.50 0.51 0.51EFCD10612 0.61 0.51 1.13 0.72 0.50 0.45 0.81 0.69 0.51 0.72EFCD16412 0.51 0.51 0.51 0.51 0.50 0.45 0.50 0.50 0.51 0.51EFCD16612 0.61 0.51 1.13 0.72 0.50 0.45 0.81 0.69 0.51 0.72EFCD17412 0.51 0.51 0.51 0.51 0.50 0.45 0.50 0.50 0.51 0.51EFCD17612 0.61 0.51 1.13 0.72 0.50 0.45 0.81 0.69 0.51 0.72Q = Flow rate in gallons per minuteC V= Average coefficient across variousflow rates (see chart)P = Pressure drop across coupling (psi)S = Specific gravity of liquid48
.14".78"EFC SeriesGasket Thickness: .06"Mounting Hole: .720" diameterCoupling Spacing: 1.25" min.Greenlee ® 720 Keyway Punch and730BB-3/4 Hole Punch.AProduct DimensionsAØ .72"PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03DBBPANEL PANELNUT HEX NUT THREAD13/16 11/16-24UNFA = Height/DiameterB = Total Length (including valve)D =Elbow Radial LengthCoupling BodiesTERMINATIONIN-LINEPIPE THREADTHREAD SIZE SHUTOFF A B1/4" NPT EFCD10412 .93 2.293/8" NPT EFCD10612 .93 2.29TERMINATIONBULKHEADPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID EFCD16412 .93 2.233/8" ID 9.5mm ID EFCD16612 .93 2.23TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B1/4" ID 6.4mm ID EFCD17412 .93 2.233/8" ID 9.5mm ID EFCD17612 .93 2.23TERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEHOSE BARBTHREAD SIZE SHUTOFF A B1/4" NPT EFCD24412 .72 1.773/8" NPT EFCD24612 .72 1.77TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID EFC22412 EFCD22412 .60/.72 1.33/2.083/8" ID 9.5mm ID EFC22612 EFCD22612 .60/.72 1.33/1.90Coupling InsertsEFC12 SERIESTERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" ID 6.4mm ID EFC23412 EFCD23412 .63 1.32/1.45 .963/8" ID 9.5mm ID EFC23612 EFCD23612 .63 1.32/1.45 .96AccessoriesPANEL MOUNTGASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies listed above EPDM 668400All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted. Straightthru dimension is listed first when two measurements are provided.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.49
Actual SizeFeaturesNon-spill designColor codingGlass-filled polypropyleneMedical-grade ABSBenefitsNS4 SERIESNS4 Series couplings feature non-spill valves in a compactsize, at a great price. Use the NS4 when even a few drops pose problemsregarding safety, media cost or environmental regulations. These innovativecouplings are lightweight, chemically resistant and easy to use. The nonspilldesign effectively eliminates spills, minimizes downtime and enhancesoperator safety.PatentedDisconnect under pressure with no spillsInstant visual differentiation of media linesDurable and compatible with manychemicalsGamma sterilizable<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:32 F°to 160°F (0°C to 71°C)Materials:Main components and valves:Glass-filled polypropylene with TPV* overmold,ABS with TPE* soft-touch overmoldThumb latch: Glass-filled polypropylene, ABSValve spring: 316 stainless steelExternal spring: 316 stainless steelO-rings: EPDMColor:Polypropylene: Gray with darkgray overmold standard; gray with redor blue overmold available†ABS: White with teal overmoldTubing Sizes:1/8" to 3/8" ID, 3.2mm to 9.5mm IDLubricants: Krytox ® PFPE (inert)Spillage:
Coupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEFERRULESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBPOLYPROPYLENE ABSTHREAD SIZE SHUTOFF SHUTOFF A B1/4" NPT NS4D10004 NS4D1000406 1.05 2.311/4" BSPT NS4D10004BSPT NS4D10004BSPT06 1.05 2.29POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID NS4D13004 1.05 2.323/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID NS4D13006 NS4D1300606 1.05 2.45POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/8" ID* 3.2mm ID* NS4D17002 NS4D1700206 1.05 2.091/4" ID 6.4mm ID NS4D17004 NS4D1700406 1.05 2.343/8" ID 9.5mm ID NS4D17006 NS4D1700606 1.05 2.34Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEFERRULESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTERMINATIONPANEL MOUNTFERRULESSPOLYTUBE FITTING,PTF†TERMINATIONPANEL MOUNTHOSE BARBPOLYPROPYLENE ABSTHREAD SIZE SHUTOFF SHUTOFF A B1/4" NPT NS4D24004 NS4D2400406 .96 1.951/4" BSPT NS4D24004BSPT NS4D24004BSPT06 .96 1.95POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID NS4D20004 .96 1.953/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID NS4D20006 NS4D2000606 .96 2.09POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/8" ID* 3.2mm ID* NS4D22002 NS4D2200206 .96 1.731/4" ID 6.4mm ID NS4D22004 NS4D2200406 .96 1.983/8" ID 9.5mm ID NS4D22006 NS4D2200606 .96 1.98POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID NS4D40004 1.17 2.303/8" OD, 1/4" ID 9.5mm OD, 6.4mm ID NS4D40006 NS4D4000606 1.17 2.43POLYPROPYLENE ABSTUBING SIZE METRIC EQ. SHUTOFF SHUTOFF A B1/8" ID* 3.2mm ID* NS4D42002 NS4D4200206 1.17 2.071/4" ID 6.4mm ID NS4D42004 NS4D4200406 1.17 2.323/8" ID 9.5mm ID NS4D42006 NS4D4200606 1.17 2.32PANEL MOUNTGASKETAccessoriesMATERIALPART NO.For sealing panel mount inserts listed above EPDM 1879800FKM 1889500SMART COUPLINGS WITH RFIDCoupling ReaderCoupling InsertsTERMINATION TUBING SIZE METRIC EQ. SHUTOFFIN-LINE 1/8"ID 3.2mm iNS4DR1700200HOSE BARB 1/4"ID 6.4mm iNS4DR17004003/8"ID 9.5mm iNS4DR1700600NOTE: RFID specifications are located on page 35.TERMINATION TUBING SIZE METRIC EQ. SHUTOFFIN-LINE 1/8"ID 3.2mm iNS4DR2200200HOSE BARB 1/4"ID 6.4mm iNS4DR22004003/8"ID 9.5mm iNS4DR2200600For Product Dimensions Visit www.colder.comAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. PTF fittings are designed for semi-rigid tubing, i.e., polyethylene,nylon, polyurethane, etc. †NOTE: Colder’s Ferruleless PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse.*NOTE: Patented 1/8" ID (3.2mm) hose barb connection has a support shroud allowing a maximum tube OD of 1/4" (6.4mm).| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.51NS4 SERIES
NS6 SERIESActual SizePatentedNS6 SERIES<strong>Specifications</strong>Pressure:Vacuum to 120 psi, 8.3 bar (see graph)Temperature:32°F to 160°F (0°C to 71°C) (see graph)Materials:Main components:Glass-filled polypropylene with TPV* soft touchovermoldThumb latch: Glass-filled polypropyleneValve spring (wetted): 316 stainless steelExternal spring: 316 stainless steelO-rings: EPDMColor:Gray with dark gray overmold standard;gray with red or blue overmold available†Tubing Sizes:3/8" and 1/2" ID, 9.5mm and 12.7mm IDLubricants: Krytox ® PFPE (inert)NS6 Series couplings feature non-spill valvesat a great price. Use the NS6 when even a few dropsof spillage pose problems regarding safety, media costor environmental regulations. These innovative couplingsare lightweight, chemically resistant and easy to use. Thenon-spill design virtually eliminates spills, minimizes downtimeand enhances operator safety. Soft touch overmold makes themcomfortable in the hand and very attractive.FeaturesNon-spill designColor codingGlass-filled polypropyleneColder thumb latchBenefitsDisconnect under pressure with no spillsInstant visual differentiation of media linesDurable and compatible with manychemicalsOne-hand connection and disconnectionSpillage: ~0.03 cc per disconnect @ 0 psi,~0.30 cc/disconnect @ 120 psiInclusion: 0.42 cc per connect*The overmold material is a TPV. (thermoplasticvulcanizate) This TPV is an alloy of polypropylenethermoplastic and fully vulcanized EPDM rubber.The material is typically resistant to water, acidsand bases.†NOTE: Standard product is gray; color optionsrequire a set-up charge and minimum quantities.Please contact Colder for details.These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graphrepresents the operating range of the product family, i.e., upper and lower values are shown. Therefore, depending on the exact couplingconfigurations selected, you can reasonably expect values to fall within the shaded area.52
Product DimensionsAAØ 1.250"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING INSERTS see drawing .25 .03BA = Height/DiameterBB = Total LengthCoupling BodiesNS6 SERIESTERMINATIONIN-LINEPIPE THREADTHREAD SIZE SHUTOFF A B1/2" NPT NS6D10008 1.31 3.011/2" BSPT NS6D10008BSPT 1.31 3.01TERMINATIONIN-LINECOMPRESSIONTUBING SIZE METRIC EQ. SHUTOFF A B1/2" OD 12.7mm OD NS6D13008 1.31 3.53TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID NS6D17006 1.31 3.161/2" ID 12.7mm ID NS6D17008 1.31 3.16Coupling InsertsTERMINATIONIN-LINEPIPE THREADTHREAD SIZE SHUTOFF A B1/2" NPT NS6D24008 1.31 2.441/2" BSPT NS6D24008BSPT 1.31 2.44TERMINATIONIN-LINECOMPRESSIONTUBING SIZE METRIC EQ. SHUTOFF A B1/2" OD 12.7mm OD NS6D20008 1.31 3.01TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID NS6D22006 1.31 2.591/2" ID 12.7mm ID NS6D22008 1.31 2.59TERMINATIONPANEL MOUNTCOMPRESSIONTUBING SIZE METRIC EQ. SHUTOFF A B1/2" OD 12.7mm OD NS6D40008 1.50 3.32TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID NS6D42006 1.50 2.851/2" ID 12.7mm ID NS6D42008 1.50 2.85AccessoriesPANEL MOUNTGASKETMATERIALPART NO.For sealing panel mount inserts listed above EPDM 1884300FKM 1889600All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.53
NSH SERIESPatentedNSH Series couplings are general purpose versionsof our pressure-balanced, non-spill, ChemQuik ® CQG06couplings. Molded polypropylene, EPDM seals and a 100%springless and metal-free flow path provide broad chemicalresistance and exceptionally high flow capacity, allowinginstant disconnects (and reconnects), even under pressure.Their non-spill design virtually eliminates spills, minimizesdowntime and enhances operator safety in a very low costpackage.Actual sizeNSH SERIES<strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 barTemperature:32°F to 120°F (0°C to 49°C)Materials:Main components: Glass-filled polypropyleneThumb latch:Glass-filled polypropyleneO-rings: EPDMSprings (non-wetted): 316 stainless steelCompression nuts: White polypropyleneColor:Gray with dark gray accent standard;red or blue thumb latch and insert tip available.Tubing Sizes:3/8" to 3/4" ID, 9.5mm to 19.0mm IDLubricants: Krytox ® PFPE (inert)Spillage:
Product DimensionsAANot to scale.Ø 2.000"+.010-.000BA = Height/DiameterB = Total LengthBPANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .12OR INSERTSCoupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINECOMPRESSIONTHREAD SIZE SHUTOFF A B3/8" FEMALE NPT NSHD19006 2.0 3.703/8" BSPT NSHD10006BSPT 2.0 3.671/2" NPT NSHD10008 2.0 3.813/4" NPT NSHD10012 2.0 4.01TUBING SIZE METRIC EQ. SHUTOFF A B3/8" OD 9.5mm OD NSHD13006 2.0 3.971/2" OD 12.7mm OD NSHD13008 2.0 4.10NSH SERIESTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID NSHD17006 2.0 3.731/2" ID 12.7mm ID NSHD17008 2.0 3.735/8" ID 15.9mm ID NSHD17010 2.0 3.883/4" ID 19.0mm ID NSHD17012 2.0 3.88Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINECOMPRESSIONTHREAD SIZE SHUTOFF A B3/8" FEMALE NPT NSHD26006 1.64 3.873/8" BSPT NSHD24006BSPT 1.64 3.841/2" NPT NSHD24008 1.64 3.983/4" NPT NSHD24012 1.64 3.98TUBING SIZE METRIC EQ. SHUTOFF A B3/8" OD 9.5mm OD NSHD20006 1.64 4.141/2" OD 12.7mm OD NSHD20008 1.64 4.27TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID NSHD22006 1.64 3.901/2" ID 12.7mm ID NSHD22008 1.64 3.905/8" ID 15.9mm ID NSHD22010 1.64 4.053/4" ID 19.0mm ID NSHD22012 1.64 4.05AccessoriesDESCRIPTIONPanel mount kit with panel sealDust plug/cap for body or insert*PART NO.NSHPMKIT121800700 (not shown)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. *Panel mount kit can be used with body for front mount or insert forfront or rear mount.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.55
HFC12 SERIES<strong>Specifications</strong>Pressure: Vacuum to 60 psi, 4.2 barTemperature:32°F to 160°F (0°C to 71°C)Materials:Main components and valves: PolypropyleneThumb latch: PolypropyleneValve spring (wetted):316 stainless steelExternal springs: 316 stainless steelO-rings: EPDMPanel mount gasket: EPDMCompression nut, gripper, ferrule: PolypropyleneColor:Gray with dark gray latchTubing Sizes:3/8" to 3/4" ID, 9.5mm to 19.0mm IDActual sizeFor compression termination specifications:3/8" OD or 1/2" OD, +0.010/-0.000WARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions. Use the graphs on the following page as a guide.HFC12 SERIESPatented HFC12 Series couplings have flow comparable tomany 1/2" flow couplings in a 3/8" body size. Compact and lightweight, HFCcouplings replace bulky and heavy brass ball-and-sleeve couplings in a widerange of applications. An ergonomic design and a large, shrouded thumb latchpad produce a coupling that is easy to grip and simple to operate. An efficientvalve design leads to high flow and low spillage.FeaturesHigh efficiency valveErgonomic designPolypropylene materialCompatibleBenefitsMore flow in a compact sizeEasy to grip, simple to operateChemically resistant and gamma sterilizableMates with HFC35 and HFC57 couplings56
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.DID YOU KNOW ...Colder offers over 7,500 couplingsfor a wide variety of applicationssuch as low-pressure air and fluidline connections, high-puritychemical management andbioprocessing connectors. Contactus at 1-800-444-2474 or 651-645-0091to learn how Colder can make yourconnections cleaner, faster, safer andsmarter!HFC12 SERIESLiquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Each coupling wastested with water at 70°F (21°C). To determine flow rates for specific couplingconfigurations use the formula to the right.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidC VValues for High Flow Couplings (HFC12)HFC HFCD HFC HFCD HFC HFCD HFC HFCD HFC HFCD HFC HFCD HFC HFCDBODIES 22612 22612 22812 22812 23612 23612 23812 23812 24612 24612 24812 24812 221212 221212HFCD10612 1.27 1.27 1.62 1.51 1.14 1.14 1.46 1.36 1.80 1.58 1.70 1.65 - -HFCD10812 1.28 1.34 1.62 1.51 1.15 1.24 1.46 1.36 1.81 1.54 1.72 1.56 - -HFCD16612 1.07 1.00 1.17 1.14 0.96 0.90 1.05 1.03 1.33 1.26 1.30 1.24 - -HFCD16812 1.25 1.23 1.61 1.52 1.13 1.11 1.45 1.37 1.79 1.60 1.68 1.56 - -HFCD17612 1.07 1.00 1.17 1.14 0.96 0.90 1.05 1.03 1.33 1.26 1.30 1.24 - -HFCD17812 1.25 1.23 1.61 1.52 1.13 1.11 1.45 1.37 1.79 1.60 1.68 1.56 - -HFC171212 - - - - - - - - - - - - 3.94 -HFCD171212 - - - - - - - - - - - - - 2.04| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.57
Product Dimensions.17"AA1.30"Gasket Thickness: .06"Mounting Hole: 1.21" diameterCoupling Spacing: 1.92" minimumDBBØ 1.21"A = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthPANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03Coupling BodiesHFC12 SERIESTERMINATIONIN-LINEPIPE THREADTERMINATIONBULKHEAD PANELMOUNTHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" NPT HFC10612 HFCD10612 1.44 2.693/8" BSPT HFC10612BSPT HFCD10612BSPT 1.44 2.721/2" NPT HFC10812 HFCD10812 1.44 2.883/4" NPT HFC101212 HFCD101212 1.44 3.07TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC16612 HFCD16612 1.82 2.821/2" ID 12.7mm ID HFC16812 HFCD16812 1.82 2.825/8" ID 15.9mm ID HFC161012 HFCD161012 1.82 2.943/4" ID 19.0mm ID HFC161212 HFCD161212 1.82 2.94TERMINATIONBULKHEADPANEL MOUNTCOMPRESSIONTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD 9.5mm OD HFC12612 HFCD12612 1.82 2.961/2" OD 12.7mm OD HFC12812 HFCD12812 1.82 3.11TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC17612 HFCD17612 1.44 2.791/2" ID 12.7mm ID HFC17812 HFCD17812 1.44 2.795/8" ID 15.9mm ID HFC171012 HFCD171012 1.44 2.943/4" ID 19.0mm ID HFC171212 HFCD171212 1.44 2.94TERMINATIONIN-LINECOMPRESSIONTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD 9.5mm OD HFC13612 HFCD13612 1.44 2.961/2" OD 12.7mm OD HFC13812 HFCD13812 1.44 3.11AccessoriesPANEL MOUNTGASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies EPDM 621200listed aboveAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.58| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" NPT HFC24612 HFCD24612 1.16 1.77/1.893/8" BSPT HFC24612BSPT HFCD24612BSPT 1.16 1.80/1.921/2" NPT HFC24812 HFCD24812 1.16 1.95/2.073/4" NPT HFC241212 HFCD241212 1.23 2.14/2.26TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC22612 HFCD22612 1.00 1.97/2.091/2" ID 12.7mm ID HFC22812 HFCD22812 1.00 1.97/2.095/8" ID 15.9mm ID HFC221012 HFCD221012 1.00 2.01/2.133/4" ID 19.0mm ID HFC221212 HFCD221212 1.00 2.14/2.26non-valved shownTERMINATIONIN-LINECOMPRESSIONTERMINATIONELBOWHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" OD 9.5mm OD HFC20612 HFCD20612 1.00 2.14/2.261/2" OD 12.7mm OD HFC20812 HFCD20812 1.00 2.29/2.41TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D3/8" ID 9.5mm ID HFC23612 HFCD23612 1.00 1.93/2.05 .931/2" ID 12.7mm ID HFC23812 HFCD23812 1.00 1.97/2.09 .933/4" ID 19.0mm ID HFC231212 HFCD231212 1.00 1.95/2.07 .93non-valved shownnon-valved shownHFC12 SERIESWhen selecting a valved coupling for your application, make sure toorder a part number with a D just before the numeric portion of thepart number. For example, HFC101212 does not have a shut-off valve;HFCD101212 would be the correct part number to order for a valvedcoupling.To visually identify a part to determine whether or not it is valved,disconnect the coupling body and insert, and then look through thepart. If you can see light all the way through, your part is non-valved. Ifthere is anything obstructing the light, you probably have a valved part.Please contact Customer Service at 1-800-444-2474 or 651-645-0091 ifyou need further assistance.HFC12 SERIESAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.59
Actual sizeHFC SERIES<strong>Specifications</strong>Pressure:Vacuum to 125 psi, 8.6 barTemperature:-40°F to 280°F (-40°C to 138°C)Materials:Main components and valves:HFC35 - PolysulfoneHFC57 - UV-resistant polysulfoneThumb latch:HFC35 - PolysulfoneHFC57 - UV-resistant polysulfoneValve spring: 316 stainless steelExternal springs: 316 stainless steelO-rings: EPDMPanel mount gasket: EPDMFemale GHT gasket: FDA EPDMColors:HCF35 - Natural white, dark gray latchHCF57 - Black, black latchTubing Sizes:3/8" to 3/4" ID, 9.5mm to 19.0mm IDWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions. Use the graphs on the following page as a guide.HFC35 Series polysulfone couplings are able to withstand demanding ngapplications and feature physical strength, chemical resistance andautoclavability.HFC57 Series polysulfone couplings are UV resistant and able towithstand continued exposure to harmful UV rays without affectingperformance.HFC35 & HFC57 SERIESBoth can operate in harsh environments in temperatures from -40°F to 280°F(-40°C to 138°C) and pressures from vacuum to 125 psi (8.6 bar). An ergonomicdesign and a large, shrouded thumb latch pad produce a coupling that is easyto grip and simple to operate. An efficient valve design leads to high flow andexceptionally low spillage. Both series also add bulkhead panel mount, garden hosethread and Hastelloy ® C spring options.FeaturesPolysulfone (HFC35)UV Polysulfone (HFC57)High efficiency valveErgonomic designCompatibleBenefitsPhysically strong and autoclavablePhysically strong and UV resistantMore flow and less spillage in a compact sizeEasy to grip, simple to operateMates with HFC12 couplings60
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.DID YOU KNOW ...When specifying products withpipe thread terminations, don'tforget to consult Colder's whitepaper on NPT pipe threads.Visit the TECHNICAL section ofwww.colder.com.DID YOU KNOW ...the HFC57 Series polysulfone couplings are UV-resistant and ableto withstand continued exposure to harmful rays without affectingperformance?These couplings offer all the same features as our HFC12 and HFC35 Series with the added advantage ofUV-resistance to protect the strength and durability of your fluid connections. Use the HFC57 couplings inoutdoor applications such as watercraft, lawn irrigation systems and solar heating on roofs and decks wherea connector is subjected to the harsh rays of the sun.HFC35 & HFC57 SERIES| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.61
HFC35 Coupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)TERMINATIONBULKHEADPANEL MOUNTHOSE BARBTERMINATIONIN-LINEHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" NPT HFC10635 HFCD10635 1.44 2.733/8" BSPT HFC10635BSPT HFCD10635BSPT 1.44 2.731/2" NPT HFC10835 HFCD10835 1.44 2.881/2" BSPT HFC10835BSPT HFCD10835BSPT 1.44 2.883/4" NPT HFC101235 HFCD101235 1.44 3.123/4" BSPT HFC101235BSPT HFCD101235BSPT 1.44 3.123/4" GHT HFC101235GHT HFCD101235GHT 1.44 2.94THREAD SIZE STRAIGHT THRU SHUTOFF A B3/4" GHT HFC191235GHT HFCD191235GHT 1.44 2.703/4" BSPP HFC191235BSPP HFCD191235BSPP 1.44 2.70TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC16635 HFCD16635 1.44 2.821/2" ID 12.7mm ID HFC16835 HFCD16835 1.44 2.825/8" ID 15.9mm ID HFC161035 HFCD161035 1.44 2.943/4" ID 19.0mm ID HFC161235 HFCD161235 1.44 2.94TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC17635 HFCD17635 1.44 2.821/2" ID 12.7mm ID HFC17835 HFCD17835 1.44 2.825/8" ID 15.9mm ID HFC171035 HFCD171035 1.44 2.943/4" ID 19.0mm ID HFC171235 HFCD171235 1.44 2.94AccessoriesPANEL MOUNTGASKETREPLACEMENTGHT GASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies listed above EPDM 621200MATERIALPART NO.For sealing female threads FDA EPDM 2339400HFC35 Coupling InsertsHFC35 & HFC57 SERIESnon-valvednon-valvedshownshownnon-valved shownnon-valved shownTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)TERMINATIONIN-LINEHOSE BARBTERMINATIONELBOWHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" NPT HFC24635 HFCD24635 1.16 1.82/1.943/8" BSPT HFC24635BSPT HFCD24635BSPT 1.16 1.97/2.091/2" NPT HFC24835 HFCD24835 1.16 1.97/2.091/2" BSPT HFC24835BSPT HFCD24835BSPT 1.16 1.17/2.093/4" NPT HFC241235 HFCD241235 1.23 2.22/2.343/4" BSPT HFC241235BSPT HFCD241235BSPT 1.23 2.21/2.333/4" GHT HFC241235GHT HFCD241235GHT 1.23 2.03/2.15THREAD SIZE STRAIGHT THRU SHUTOFF A B3/4" GHT HFC261235GHT HFCD261235GHT 1.37 1.79/1.913/4" BSPP HFC261235BSPP HFCD261235BSPP 1.37 1.79/1.91TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC22635 HFCD22635 1.00 1.91/2.031/2" ID 12.7mm ID HFC22835 HFCD22835 1.00 1.91/2.035/8" ID 15.9mm ID HFC221035 HFCD221035 1.00 2.03/2.153/4" ID 19.0mm ID HFC221235 HFCD221235 1.00 2.03/2.15TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D3/8" ID 9.5mm ID HFC23635 HFCD23635 1.00 1.92/2.04 .931/2" ID 12.7mm ID HFC23835 HFCD23835 1.00 1.96/2.08 .93All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.62| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
.17"Product DimensionsADBBA1.30"Gasket Thickness: .06"Mounting Hole: 1.21" diameterCoupling Spacing: 1.92" minimumA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthØ 1.21"PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03HFC57 Coupling BodiesTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)TERMINATIONBULKHEADPANEL MOUNTHOSE BARBTERMINATIONIN-LINEHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" BSPT HFC10657BSPT HFCD10657BSPT 1.44 2.731/2" NPT HFC10857 HFCD10857 1.44 2.881/2" BSPT HFC10857BSPT HFCD10857BSPT 1.44 2.883/4" BSPT HFC101257BSPT HFCD101257BSPT 1.44 3.123/4" GHT HFC101257GHT HFCD101257GHT 1.44 2.94THREAD SIZE STRAIGHT THRU SHUTOFF A B3/4" GHT HFC191257GHT HFCD191257GHT 1.44 2.703/4" BSPP HFC191257BSPP HFCD191257BSPP 1.44 2.70TUBING SIZE METRIC EQ. SHUTOFF A B3/8" ID 9.5mm ID HFCD16657 1.82 2.821/2" ID 12.7mm ID HFCD16857 1.82 2.825/8" ID 15.9mm ID HFCD161057 1.82 2.943/4" ID 19.0mm ID HFCD161257 1.82 2.94TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC17657 HFCD17657 1.44 2.821/2" ID 12.7mm ID HFC17857 HFCD17857 1.44 2.825/8" ID 15.9mm ID HFC171057 HFCD171057 1.44 2.943/4" ID 19.0mm ID HFC171257 HFCD171257 1.44 2.94AccessoriesPANEL MOUNTGASKETREPLACEMENTGHT GASKETREPLACEMENTMATERIALPART NO.For sealing panel mount bodies listed above EPDM 621200MATERIALPART NO.For sealing female threads FDA EPDM 2339400HFC57 Coupling InsertsTERMINATIONIN-LINEPIPE THREADTERMINATIONIN-LINEPIPE THREAD(FEMALE)TERMINATIONIN-LINEHOSE BARBTHREAD SIZE STRAIGHT THRU SHUTOFF A B3/8" BSPT HFC24657BSPT HFCD24657BSPT 1.16 1.84/1.961/2" BSPT HFC24857BSPT HFCD24857BSPT 1.16 1.99/2.071/2" NPT HFC24857 HFCD24857 1.16 1.95/2.113/4" BSPT HFC241257BSPT HFCD241257BSPT 1.23 2.19/2.313/4" GHT HFC241257GHT HFCD241257GHT 1.16 2.15/2.27THREAD SIZE STRAIGHT THRU SHUTOFF A B3/4" GHT HFC261257GHT HFCD261257GHT 1.37 1.79/1.913/4" BSPP HFC261257BSPP HFCD261257BSPP 1.37 1.79/1.91TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B3/8" ID 9.5mm ID HFC22657 HFCD22657 1.00 1.91/2.031/2" ID 12.7mm ID HFC22857 HFCD22857 1.00 1.91/2.035/8" ID 15.9mm ID HFC221057 HFCD221057 1.00 2.03/2.153/4" ID 19.0mm ID HFC221257 HFCD221257 1.00 2.03/2.15non-valved shownnon-valved shownnon-valved shownHFC35 & HFC57 SERIESAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.63
FFC35 SERIESActual sizeFFC35 SERIES<strong>Specifications</strong>Pressure: Vacuum to 125 psi, 8.6 barTemperature:-40°F to 280°F (-40°C to 138°C)Materials:Main components: PolysulfoneThumb latch: PolysulfoneExternal spring: 316 stainless steelO-rings: FDA Buna-NPanel mount gasket: EPDMFemale GHT gasket: FDA EPDMColor:Natural white with dark gray latchTubing Sizes: 3/4" ID, 19.0mm IDWARNING: Pressure, temperature, chemicals, and operatingenvironment can affect the performance of couplings. It is thecustomer’s responsibility to test the suitability of Colder productsin their own application conditions. Use the graphs on thefollowing page as a guide.FFC35 Series1/2" flow couplingsfeature double the flow ofthe HFC Series couplings.The FFC Series has a nonvalvedbore that increases flowand minimizes turbulence. Thepolysulfone material is able towithstand demanding applications andfeatures physical strength, chemical resistance and autoclavability.An ergonomic design and a large, shrouded thumb latch padproduce a coupling that is easy to grip and simple to operate.FeaturesNo valvesPolysulfone materialErgonomic designBenefitsExceptional flowPhysically strong and autoclavableEasy to grip, simple to operateThese graphs are intended to give you a general idea ofthe performance capabilities of each product line.Panel Mount DimensionsPANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03Gasket Thickness: .06"Mounting Hole: 1.21" diameterCoupling Spacing: 1.92" minimum.17"1.30"Non-ValvedColder's FFC35 Series couplingsfeature a wide open, straight-thruflow path.Ø 1.2164
Product Dimensions (cont.)AATERMINATIONIN-LINEPIPE THREADBBA = Height/DiameterB = Total LengthTHREAD SIZE STRAIGHT THRU A B1/2" NPT FFC10835 1.44 2.881/2" BSPT FFC10835BSPT 1.44 2.883/4" NPT FFC101235 1.44 3.123/4" BSPT FFC101235BSPT 1.44 3.123/4" GHT FFC101235GHT 1.44 2.94Coupling BodiesFFC35 SERIESTERMINATIONIN-LINEPIPE THREAD(FEMALE)THREAD SIZE STRAIGHT THRU A B3/4" GHT FFC191235GHT 1.44 2.703/4" BSPP FFC191235BSPP 1.44 2.70TERMINATIONBULKHEADPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B3/4" ID 19.0mm ID FFC161235 1.82 2.94TERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B3/4" ID 19.0mm ID FFC171235 1.44 2.94TERMINATIONPANEL MOUNTGASKETREPLACEMENTMATERIAL PART NO.For sealing panel mount bodies listed above EPDM 621200AccessoriesTERMINATIONGHT GASKETREPLACEMENTMATERIAL PART NO.For sealing female threads FDA EPDM 2339400Coupling InsertsTERMINATIONIN-LINEPIPE THREADTHREAD SIZE STRAIGHT THRU A B1/2" NPT FFC24835 1.16 1.951/2" BSPT FFC24835BSPT 1.16 1.953/4" NPT FFC241235 1.23 2.143/4" BSPT FFC241235BSPT 1.23 2.143/4" GHT FFC241235GHT 1.16 2.01non-valved shownTERMINATIONIN-LINEPIPE THREAD(FEMALE)THREAD SIZE STRAIGHT THRU A B3/4" GHT FFC261235GHT 1.37 1.773/4" BSPP FFC261235BSPP 1.37 1.77non-valved shownTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B3/4" ID 19.0mm ID FFC221235 1.00 2.02non-valved shownAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.65
TENTUBE SERIESActual sizeCONNECT UP TO 10 TUBES IN ONE EASY MOTION!<strong>Specifications</strong>Pressure:Vacuum to 100 psi, 6.9 bar per lineTemperature:Acetal fitting inserts:-40°F to 180°F (-40°C to 82°C)Polypropylene fitting inserts:32°F to 180°F (0°C to 82°C)Materials:Main components: NylonValves: AcetalValve springs: 316 stainless steelFitting inserts: Acetal or polypropyleneO-rings: Buna-N with acetalor EPDM with polypropylenePanel mount adapter: AcetalTube shroud: AcetalColor:Main components:Black with red locking latchTube shroud: BlackPanel mount adapter: BlackTubing Sizes:1/16" to 1/8" ID, 1.6mm to 3.2mm IDThe Tentube coupling provides one easy-to-use quickdisconnect for up to ten separate fluid lines. The Tentube is available with valveson the body side in panel mount or in-line configurations for maximum designflexibility. The Tentube can connect and disconnect up to ten lines with the useof a simple slide latch. Tubing orientation is ensured by keying the couplingbody and insert. Different fluids and tubing sizes can be accommodated byusing acetal or polypropylene inserts in three popular sizes.FeaturesTen line connectionSeparate flow pathsInsert is keyed to bodyAcetal or polypropyleneinsertsBenefitsFast, efficient operationPressure and/or vacuum in one couplingEnsures correct line orientationMaximize design flexibility.13"Panel Mount DimensionsPANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .44 .061.92"Ø 1.8866
These graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Don’t forget: you can alwaysvisit www.colder.com for moreproduct information.Tentube CompleteTERMINATIONSCOMPLETECOUPLING SETTERMINATIONSCOUPLING BODYWITH FEMALEFITTING BODIESACETAL ACETAL POLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF STRAIGHT THRU1/16" ID 1.6mm ID TT1001 TTD1001 TT1001123.0mm ID TT10M3 TTD10M31/8" ID 3.2mm ID TT1002 TTD1002 TT100212ACETAL ACETAL POLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF STRAIGHT THRU1/16" ID 1.6mm ID TFB1001 TFBD1001 TFB1001123.0mm ID TFB10M3 TFBD10M31/8" ID 3.2mm ID TFB1002 TFBD1002 TFB100212Without fitting bodiesTFB10TENTUBE SERIESTERMINATIONSCOUPLING INSERTWITH MALEFITTING INSERTSACETALPOLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU STRAIGHT THRU1/16" ID 1.6mm ID TMB1001 TMB1001123.0mm IDTMB10M31/8" ID 3.2mm ID TMB1002 TMB100212Without fitting insertsTMB10Inserts & BodiesTERMINATIONSFITTING INSERTS(SEE NOTE ONPAGE 66)TERMINATIONSFITTING BODIES(SEE NOTE ONPAGE 66)ACETALPOLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU STRAIGHT THRU1/16" ID 1.6mm ID TMF01 TMF01123.0mm IDTMFM31/8" ID 3.2mm ID TMF02 TMF0212ACETAL ACETAL POLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF STRAIGHT THRU1/16" ID 1.6mm ID TFF01 TFFD01 TFF01123.0mm ID TFFM3 TFFDM31/8" ID 3.2mm ID TFF02 TFFD02 TFF0212Note: Acetal bodies and inserts are also available in white. To order, add MWHT to the end of the part number.AccessoriesDESCRIPTIONTube shroud - snaps into either halfPanel mount adapter & nut - 7/16" max. panel thickness;requires 1.875" diameter holePART NO.TS10TPM10All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.67
PatentedSIXTUBESixtube <strong>Specifications</strong>Pressure: Vacuum to 100 psi, 6.9 bar per lineTemperature:Acetal fitting inserts:-40°F to 180°F (-40°C to 82°C)Polypropylene fitting inserts:32°F to 180°F (0°C to 82°C)Materials:Main component: AcetalValves: AcetalFitting inserts: Acetal, polypropyleneThumb latch: AcetalValve spring: 316 stainless steelO-rings: Buna-N with acetal or EPDM withpolypropyleneThe Sixtube coupling provides one easy-to-usequick disconnect for up to six separate fluid lines. The Sixtubeis available with valves on either side for maximum designflexibility. Featuring the Colder thumb latch, the Sixtube candisconnect up to six lines with the push of a button. The snap-inpanel mount design keeps a low profile on the front of theequipment panel.Color: Natural white with aqua latchTubing Sizes:1/16" to 1/8" ID, 1.6mm to 3.2mm IDNOTE: Caution must be observed when ordering Sixtube assemblies.Body and insert halves which both contain female or male fittings will notcouple. Contact Colder for questions and ordering assistance.SIXTUBE & TWIN TUBEThe Twin Tube coupling provides one easy-tousequick disconnect for two separate fluid lines. The non-valvedTwin Tube maintains two individual flow paths in one coupling.Featuring the Colder thumb latch, the Twin Tube can disconnecttwo lines with the push of a button. The panel mount designkeeps a low profile on the front of the equipment panel.FeaturesSix/two line connectionSeparate flow pathsSixtube insert is keyedto bodyFree coupling rotation(Twin Tube)Colder thumb latchBenefitsFast, efficient operationPressure and/or vacuumin one couplingEnsures correct line orientationEliminates kinked tubingOne-hand connection anddisconnectionTWIN TUBETwin Tube <strong>Specifications</strong>Pressure: Vacuum to 120 psi, 8.3 bar per lineTemperature: -40°F to 180°F (-40°C to 82°C)Materials:Main components: Acetal, ABSThumb latch: Stainless steelExternal springs and pin: Stainless steelO-rings: Buna-NColor: Natural white (acetal), white (ABS)Tubing Sizes:1/16" to 1/8" ID, 1.6mm to 3.2mm IDThese graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area of each graph represents the operating range of the productfamily, i.e., upper and lower values are shown. Therefore, depending on the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.68
.13"1.27"SixtubeInsertPanel MountDimensionsTwin Tube Body Panel MountDimensionsØ 1.20"Panel Thickness: 1/8"PANEL PANELNUT HEX NUT THREAD13/16 11/16-24UNEFØ .688"+.010-.000Maximum Panel Thickness: 1/2"Minimum Panel Thickness: 0.02"Sixtube Coupling BodiesTERMINATIONWITH MALE FITTINGINSERTSWITH FEMALEFITTING BODIESTERMINATIONWITHOUT FITTINGSACETAL ACETAL POLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF STRAIGHT THRU1/16" ID 1.6mm ID SXM1701 SXM1701123.0mm IDSXM17M31/8" ID 3.2mm ID SXM1702 SXM1702121/16" ID 1.6mm ID SXF1701 SXFD1701 SXF1701123.0mm ID SXF17M3 SXFD17M31/8" ID 3.2mm ID SXF1702 SXFD1702 SXF170212SX17Acetal part shownSixtube Coupling InsertsTERMINATIONWITH MALE FITTINGINSERTSWITH FEMALEFITTING BODIESTERMINATIONWITHOUT FITTINGSACETAL ACETAL POLYPROPYLENETUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF STRAIGHT THRU1/16" ID 1.6mm ID SXM4201 SXM4201123.0mm IDSXM42M31/8" ID 3.2mm ID SXM4202 SXM4202121/16" ID 1.6mm ID SXF4201 SXFD4201 SXF4201123.0mm ID SXF42M3 SXFD42M31/8" ID 3.2mm ID SXF4202 SXFD4202 SXF420212DESCRIPTIONSixtube pressure plugs(For fitting bodies or inserts, see page 67)SX42PART NO.TMPMWHTAcetal part shownAccessoriesSIXTUBE & TWIN TUBETwin Tube Coupling BodiesTERMINATIONPANEL MOUNTHOSE BARBACETALABSTUBING SIZE METRIC EQ. STRAIGHT THRU STRAIGHT THRU1/16" ID 1.6mm ID PTC160101/8" ID 3.2mm ID PTC16020 PTC1602096ABS part show nTwin Tube Coupling InsertsTERMINATIONIN-LINEHOSE BARBACETALABSTUBING SIZE METRIC EQ. STRAIGHT THRU STRAIGHT THRU1/16" ID 1.6mm ID PTC220101/8" ID 3.2mm ID PTC22020 PTC2202096Acetal part shown| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.69
Actual sizeMulti-Mount couplings provide one easy-tousecoupling for connecting from three to five lines at once.Multi-mount couplings are available in a wide variety ofmaterials including acetal and chrome-plated brass. Multimountsare keyed to prevent mismatched connections andcan be configured with or without valves for maximum designflexibility.FeaturesThree to five line connectionSeparate flow pathsInsert is keyed to bodyAcetal or chrome-platedbrassBenefitsMULTI-MOUNTSERIESFast, efficient operationPressure and/or vacuum in one couplingEnsures correct line orientationMaximize design flexibility<strong>Specifications</strong>Pressure:Minimum: VacuumMaximum: Brass = 500 psi / no. of stationsor Acetal = 240 psi / no. of stationsTemperature:-40°F to 180°F (-40°C to 82°C)Materials:Main components: Acetal orchrome-plated brassThumb latch: Stainless steelMounting Plate: Black anodized aluminumValves: AcetalValve spring: 316 stainless steelExternal springs and pin: Stainless steelO-ring: Buna-NTubing Sizes:1/8" to 3/8" ID, 3.2mm to 9.5mm IDFour-Step Multi-MountOrdering ProcessStep 1: Determine flow sizeand termination type.Step 2: Order two "multiplemount plates" (one for thecoupling bodies and one forthe coupling inserts) withthe appropriate number ofconnection stations for yourspecific application (availablein 3, 4, or 5 connections, orconstruct your own). Refer topage 73.MULTI-MOUNT MO SERIESStep 3Multiple mount couplingbodies for interior stationsStep 1Multiple mount platesStep 2Standard panelmount coupling bodieswith thumb latch forexterior stationsStep 3: Order two "standardpanel mount coupling bodieswith thumb latches" for theexterior stations.Step 4: Order an appropriatenumber of "multiple mountcoupling bodies without thumblatches" to accommodate theremaining interior stations.Step 5: Order an appropriatenumber of "multiple mountinserts" to connect with standardand multiple mount bodies.Step 4Multiple mount couplinginserts70
MM SERIES 1/8" Flow.750" .850"LM SERIES 1/4" Flow.950" 1.050"1/2" Hole+.010-.00011/16" Hole+.010-.000Multiple mountplates are keyedto preventmisconnections.Multiple mountminimum couplingspacing: Colderoffsets the lasthole on themounting platesso they cannot bemisconnected.ADBProduct DimensionsABA = Height/DiameterB = Total Length (including valve)D = Elbow Radial LengthRetaining RingsCOUPLING PART NO.SERIES (replacements)MC/PMC 101700LC/PLC 278100Multiple Mount PlatesNUMBER OFSTATIONS 1/8" FLOW SIZE LENGTH 1/4" FLOW SIZE LENGTH3 CP103 2.60 LCP103 3.004 CP104 3.35 LCP104 3.355 CP105 4.10 LCP105 4.90Turquoise shading indicates 1/8" flow couplings. These are notcompatible with 1/4" flow couplings in non-shaded sections.Coupling BodiesTERMINATIONPANEL MOUNTFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONPANEL MOUNTHOSE BARBTERMINATIONPANEL MOUNTFEMALE THREADTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMM1204 PMMD1204 .72 1.721/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLM12004 PLMD12004 .94 1.823/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLM12006 PLMD12006 .94 1.95TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID PMM1602 PMMD1602 .72 1.653/16" ID 4.8mm ID PMM1603 PMMD1603 .72 1.851/4" ID 6.4mm ID PMM1604 PMMD1604 .72 1.851/4" ID 6.4mm ID PLM16004 PLMD16004 .94 1.955/16" ID 7.9mm ID PLM16005 PLMD16005 .94 1.953/8" ID 9.5mm ID PLM16006 PLMD16006 .94 1.95THREAD SIZE STRAIGHT THRU SHUTOFF A B10-32 UNF PMM181032 PMMD181032 .72 1.25Coupling InsertsTERMINATIONIN-LINEFERRULELESSPOLYTUBE FITTING,PTF†TERMINATIONIN-LINEHOSE BARBTERMINATIONELBOWFERRULELESSPOLYTUBE FITTING,PTF†TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B5/32" OD, .10" ID 4.0mm OD, 2.5mm ID PMM20025 PMMD20025 .58 1.86/1.961/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMM2004 PMMD2004 .58 1.77/1.871/4" OD, .17" ID 6.4mm OD, 4.3mm ID PLM20004 PLMD20004 .72 2.10/2.233/8" OD, .25" ID 9.5mm OD, 6.4mm ID PLM20006 PLMD20006 .72 2.02/2.15TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B1/8" ID 3.2mm ID PMM2202 PMMD2202 .56 1.87/1.973/16" ID 4.8mm ID PMM2203 PMMD2203 .58 2.08/2.181/4" ID 6.4mm ID PMM2204 PMMD2204 .58 1.83/1.931/4" ID 6.4mm ID PLM22004 PLMD22004 .72 2.20/2.335/16" ID 7.9mm ID PLM22005 PLMD22005 .72 2.20/2.333/8" ID 9.5mm ID PLM22006 PLMD22006 .72 2.03/2.16TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF A B D1/4" OD, .17" ID 6.4mm OD, 4.3mm ID PMM2104 PMMD2104 .53 1.41/1.51 .77MULTI-MOUNT SERIESAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semi-rigid tubing, i.e.,polyethylene, nylon, polyurethane, etc.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.71
HYBRID CONNECTORPatent PendingActual sizeHybrid Connectors integrate air lines, electronics and fluidinto a compact, single connection point for remote tools on medicaldevices and equipment. This groundbreaking connector technologyeliminates the need for multiple connections and allows clinicians ortherapy patients to quickly and easily change or replace modular tools,umbilicals or hand pieces that require power, signal and gases.Large Format Hybrid Connector Featuresmultiple dry-break couplings and an easy-to-use twist latch forsecure connection of multiple linesFeaturesEasy quarter turn latchTurnkey solutionOff-the-shelf assemblyCustom options availableProduct DimensionsBenefitsSecure reliable connectionAccelerate productdevelopmentMinimizes engineering designand manufacturing effortDesign a connector for yourunique requirementsHYBRIDCONNECTORHybrid Connector <strong>Specifications</strong>Pressure: Vacuum to 45 psi, 3.1 barTemperature: 40°F to 100°F (4°C to 38°C)Materials:Non-wetted coupler components: Glass-filledpolypropylene and acetalWetted coupler components: Glass-filled polypropyleneSprings: Stainless steelElectrical contacts: Gold-plated brassO-rings: EPDMTubing: PVCColor: BlackTerminations:Panel: Two 1/8" (3.2mm) hose barbs on panel andfour 20 ga wires with 12" (304.3mm) pigtailHose: 8' (2.44M) umbilical with one 1/8" (3.2mm)ID & one 1/16" (1.6mm) ID PVC tube and four 20gawires with 3" (76.2mm) pigtailNumber of fluid lines: 2Electrical <strong>Specifications</strong>Voltage: Up to 24VDC Current: Up to 3 AmpsWire gauge: 20AWG Number of contacts: 4Ø 2.48"Ø .125"AA1.75"A= Height/DiameterB = Total LengthBBCoupling HoseØ 2.00"+.010-.000CONFIGURATIONHOSEFLOW PATH 1 FLOW PATH 2 PART NO. A B1/8" ID (3.2mm) 1/16" (1.6mm) HQC17000 2.00 2.80Visit us at www.colder.comor call 651-645-0091to get a free catalog CD or tofind your local distributor.Coupling PanelCONFIGURATIONPANEL MOUNTFLOW PATH 1 FLOW PATH 2 PART NO. A B1/8" ID (3.2mm) 1/8" ID (3.2mm) HQC42000 1.96 1.1272
Mini Hybrid Connector <strong>Specifications</strong>Pressure: Vacuum to 25 psi, 1.7 barTemperature: 40°F to 80°F (4°C to 27°C)Materials:External coupler components: PETAir coupler components: AcetalSprings: Stainless steelPanel Mount Nut: Zinc-plated steelElectrical contacts: Gold-plated brassO-rings: Buna-NAir line: PVCColor: Gray with gray hoseExternal umbilical hose: 4 feet(1219.2mm) PVCWire: 22AWG PVC jacketTerminations:Panel: 1/16" hose barb and two 22AWG wires with11" pigtailUmbilical: 1/16" ID PVC tube and two 22AWG wireswith 6" pigtailNumber of air lines: 1Electrical <strong>Specifications</strong>Voltage: Up to 24VDCCurrent: Up to 3 AmpsWire: 22AWG with PVC jacketNumber of contacts: 2MINI HYBRIDCONNECTORFeaturesEasy-to-use breakaway designSmall package designStreamlined exteriorProven designProduct DimensionsAA = Height/DiameterB = Total LengthMini HybridConnector – A compact,single connection point with a smallerform factor that is ideal for use inlow-pressure applications where easeof use and ergonomics are important.This valved connector makes it easyto connect power, signal and gases inone simple motion.BBenefitsActual sizeQuick, automatic disconnectMinimize device sizeClean, attractive appearanceAccelerate productdevelopmentBAMINI HYBRID CONNECTORØ .825"Coupling HoseCONFIGURATIONHOSEFLOW PATH PART NO. A B1/16" ID (1.6mm) MHQC17000 .62 2.00.71"Coupling PanelCONFIGURATIONPANEL MOUNTFLOW PATH PART NO. A B1/16" ID (1.6mm) MHQC42000 .825 .60| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.73
SMC SERIESActual sizeThe SMC is a twist-to-connect coupling thatprovides a reliable and more secure alternative toluer-type connections. It also allows for the tubing torotate freely when connected. This important featureprevents both kinked tubing and accidental disconnectionduring use.SMC SERIES<strong>Specifications</strong>Pressure: Vacuum to 100 psi, 6.9 barTemperature:-40°F to 250°F (-40°C to 121°C)Materials:Main components: Polycarbonate, USP Class VI, ADCFLocking sleeves: Polycarbonate, USP Class VI , ADCFO-rings: Buna-N, USP Class V, ADCFColor:Main components: Purple tintSterilization:Gamma: Up to 50 kGy irradiationTubing Sizes:1/16" to 1/8" ID, 1.6mm to 3.2mm IDWARNING: Pressure, temperature, chemicals, and operating environment canaffect the performance of couplings. It is the customer’s responsibility to testthe suitability of Colder products in their own application conditions.FeaturesTwist to connectFree coupling rotationSafer; preventsmisconnectionsBenefitsPrevents accidental disconnectsEliminates kinked tubingDoes not mate to luersQ=Flow rate in gallons per minuteC V=Average coefficient across variousflow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidLiquid Flow RatesLiquid Flow Rate Information forCouplingsThe chart below shows the flow rate for Coldercouplings. Each coupling was tested with waterat 70°F (21°C). To determine flow rates forspecific coupling configurations use the formulato the right.C VValues for Subminiature CouplingsBODIES SMM01 SMM02SMF01 .03 .03SMF02 .03 .19Coupling BodyTERMINATIONIN-LINEHOSE BARBCoupling InsertProduct Dimensions(See drawing on page 14)TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID SMF0191 .48 .75/.901/8" ID 3.2mm ID SMF0291 .48 .90These graphs are intended to give you a generalidea of the performance capabilities of eachproduct line. The shaded area of the graphrepresents the operating range of the productfamily, i.e. upper and lower values are shown.Therefore, depending on the exact couplingconfigurations selected, you can reasonablyexpect values to fall within the shaded area.Coupling SetTERMINATIONIN-LINEHOSE BARBTERMINATIONHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID SMM0191 .48 .751/8" ID 3.2mm ID SMM0291 .48 .90TUBING SIZE METRIC EQ. STRAIGHT THRU A B1/16" ID 1.6mm ID SMC0191 .48 1.321/8" ID 3.2mm ID SMC0291 .48 1.6174
PatentedThe new SRC connectoris a small bore connector thateliminates the potential formisconnections with luer fittings. Theintuitive design is simple for end usersto operate and provides an audible “click”for added assurance and a secure, leak-freeconnection. This new connector features aunique elastomeric seal with a smooth, gap-freeflow path that provides better flow characteristicsand eliminates stagnant flow areas.Actual size<strong>Specifications</strong>Pressure: Vacuum to 25 psi, 1.7 barTemperature: 32° to 110° F (0° to 43° C)(rated for shipment uncoupled up to 160° F)Materials:Main components: Polypropylene with overmoldedTPE* pads, USP Class VI, ADCFIntegral seals: Overmolded TPE*, USP Class VI, ADCFColor: White with blue padsSterilization: EtO, e-beam or gammaTubing Sizes:1/8" to 3/16" ID, 3.2mm to 4.8mm IDAdd "CL" to the end of the plastic SRCpart numbers below for cleanroommanufactured versions.FeaturesPrevents misconnectionsReliable elastomeric sealsAudible “click” andpositive feelAllows tubing rotationABenefitsWon't connect to IV linesand other non-compatibleapplicationsLeak-free connectionsOperators know when a secure,reliable connection is madePrevents accidental disconnector kinked tubingProduct DimensionsA = Height/DiameterB = Total LengthBBACoupling BodiesThis graph isintended to giveyou a general ideaof the performancecapabilities of theproduct.PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES 7/16 .21 .03AND INSERTSPANEL PANELNUT HEX NUT THREAD1/2 7/16-24UNSSRC SERIESTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B1/8" ID 3.2mm ID SRC1702 .62 1.183/16" ID 4.8mm ID SRC1703 .62 1.18Coupling InsertsTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B1/8" ID 3.2mm ID SRC2202 .38 1.193/16" ID 4.8mm ID SRC2203 .38 1.19TERMINATIONPANEL MOUNTHOSE BARBTUBING SIZE METRIC EQ. STRAIGHT THRU A B1/8" ID 3.2mm ID SRC4202CB .57 1.663/16" ID 4.8mm ID SRC4203CB .57 1.66AccessoriesPART NO. DESCRIPTION MATERIALSSRC3L Tethered cap and plug White medical-grade TPEfor SRC body and insert| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.75
MPC MPC SERIES SERIESPatent PendingFeaturesErgonomic thumb latchUSP Class VI materialsSterilizable by autoclave, Et0,e-beam, or gammaParting line-free hose barbBSE/TSE free materialsActual sizeMPC Series couplings add ease of use and security toyour most critical fluid handling applications. Choose from a fullline of connectors and configurations, including pressure sealingcaps and plugs, in sizes to fit 1/8" to 3/8" tubing. MPC couplingsoffer optional locking sleeves to further guard against accidentaldisconnects. In addition, coupling halves can be rotated whenconnected to reduce tube kinks.BenefitsValidated aseptic disconnectfor pre-sterilized systemsMeet biocompatibilityrequirementsReusable, yet economicalenough to allow disposabilityEliminates potential leak pathMeet ADCF requirementsMPC SERIES<strong>Specifications</strong>Pressure:Vacuum to 60 psi, 4.14 barTemperature:ABS: -40°F to 160°F (-40°C to 71°C)Polycarbonate: -40°F to 250°F (-40°C to 121°C)Polysulfone: -40°F to 300°F (-40°C to 149°C)Materials:Main components:ABS (white), USP Class VI, ADCFPolycarbonate (purple tint), USP Class VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFLocking sleeves:Polysulfone (white), USP Class VI , ADCFThumb Latches:Polycarbonate (white), USP Class VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFO-rings: Silicone (clear), platinum-cured, USP ClassVI, ADCF and Buna-N (black), USP Class VSterilization:Gamma: Up to 50 kGy irradiationAutoclave:Polycarbonate: Up to 250°F (121°C), 30 minutes,up to 10 repetitions. Sterilize uncoupled only.Polysulfone: Up to 270°F (132°C) for 60 minutes,up to 25 repetitions. Sterilize uncoupled only.Tubing Sizes: 1/8" to 3/8" ID, 3.2mm to 9.5mm IDWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibility totest the suitability of Colder’s products in their own application conditions.76Product DimensionsABA = Height/DiameterB = Total LengthC VValues| Call toll free 1-800-444-2474 or visit us at www.colder.com for MPCCouplingsCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.BAThis graph is intended to give you a general idea of the performancecapabilities of each product line. The shaded area of the graph representsthe operating range of the product family, i.e. upper and lower valuesare shown. Therefore, depending on the exact coupling configurationsselected, you can reasonably expect values to fall within the shaded area.Liquid Flow RatesLiquid Flow Rate Information for CouplingsThe chart below shows the flow rate for Colder couplings. Eachcoupling was tested with water at 70°F (21°C). To determine flowrates for specific coupling configurations use the formula below.Q=Flow rate in gallons per minuteC V=Average coefficient across various flow rates (see chart)P=Pressure drop across coupling (psi)S=Specific gravity of liquidMPC MPC MPCBODIES 22002T03 22004T03 22006T03MPC17002T03 0.11 - 0.21MPC17004T03 - 2.8 2.8MPC17006T03 0.14 2.8 5.5
Coupling BodiesTERMINATIONIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU A B1/4" ID 6.4mm ID .210" MPC17004T .96 (24.4) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC17006T .96 (24.4) 1.30 (33.0)TERMINATIONIN-LINEHOSE BARBIN-LINE HOSE BARBWITH LOCKTUBING METRIC EQ. FLOW STRAIGHT THRU A B1/8" ID 3.2mm ID .09" MPC17002T03 .96 (24.4) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPC17004T03 .96 (24.4) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC17006T03 .96 (24.4) 1.30 (33.0)1/8" ID 3.2mm ID .09" MPCK17002T03 .99 (25.2) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPCK17004T03 .99 (25.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPCK17006T03 .99 (25.2) 1.30 (33.0)TERMINATIONIN-LINEHOSE BARBIN-LINE HOSE BARBWITH LOCKTUBING METRIC EQ. FLOW STRAIGHT THRU A B1/8" ID 3.2mm ID .09" MPC17002T39 .96 (24.4) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPC17004T39 .96 (24.4) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC17006T39 .96 (24.4) 1.30 (33.0)1/8" ID 3.2mm ID .09" MPCK17002T39 .99 (25.2) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPCK17004T39 .99 (25.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPCK17006T39 .99 (25.2) 1.30 (33.0)Coupling InsertsMPC SERIESTERMINATIONIN-LINEHOSE BARBIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU O-RING A B1/4" ID 6.4mm ID .210" MPC22004TM Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC22006TM Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)1/4" ID 6.4mm ID .210" MPC22004T Buna-N Seal USP Class V .60 (15.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC22006T Buna-N Seal USP Class V .60 (15.2) 1.30 (33.0)TERMINATIONIN-LINEHOSE BARBIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU O-RING A B1/8" ID 3.2mm ID .09" MPC22002T03M Silicone Seal USP Class VI .60 (15.2) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPC22004T03M Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC22006T03M Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)1/8" ID 3.2mm ID .09" MPC22002T03 Buna-N Seal USP Class V .60 (15.2) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPC22004T03 Buna-N Seal USP Class V .60 (15.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC22006T03 Buna-N Seal USP Class V .60 (15.2) 1.30 (33.0)TERMINATIONIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU O-RING A B1/8" ID 3.2mm ID .09" MPC22002T39M Silicone Seal USP Class VI .60 (15.2) 1.10 (27.9)1/4" ID 6.4mm ID .210" MPC22004T39M Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)3/8" ID 9.5mm ID .290" MPC22006T39M Silicone Seal USP Class VI .60 (15.2) 1.30 (33.0)Mating PartsSEALING CAP SEALING CAP W/LOCK MATERIAL A BMPC32003 MPCK32003 Polycarbonate .93 (23.6) 1.30 (33.0)MPC32039 MPCK32039 Polysulfone .99 (25.2) 1.30 (33.0)SEALING PLUG O-RING MATERIAL A BMPC30003M Silicone Seal USP Class VI Polycarbonate .75 (19.1) 1.24 (31.5)MPC30039M Silicone Seal USP Class VI Polysulfone .75 (19.1) 1.24 (31.5)PART NO. DESCRIPTION MATERIALSMPC30L Leash plug for MPC body Soft, flexible, medical-grade PVCMPC32L Leash cap for MPC insert Soft, flexible, medical-grade PVCAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.Accessories| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.77
Patent PendingMPX SERIESMPX <strong>Specifications</strong>Pressure: Vacuum to 60 psi, 4.14 barTemperature:Polycarbonate:-40°F to 250°F (-40°C to 121°C)Polysulfone:-40°F to 300°F (-40°C to 149°C)Materials:Main components:Polycarbonate (purple tint), USPClass VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFLocking sleeves: Polysulfone (white), USP Class VI,ADCFThumb Latches:Polycarbonate (white), USP Class VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFO-rings:Silicone (clear), platinum-cured, USP Class VI, ADCFSterilization:Gamma: Up to 50 kGy irradiationAutoclave:Polycarbonate: Up to 250°F (121°C), 30 minutes,up to 10 repetitions. Sterilize uncoupled only.Polysulfone: Up to 270°F (132°C) for 60 minutes,up to 25 repetitions. Sterilize uncoupled only.Tubing Sizes:3/8" and 1/2" ID, 9.5mm and 12.7mm IDMPX SERIESActual sizeWARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder’s products in their own applicationconditions.MPX Series couplings add ease of use andsecurity to your most critical fluid handling applications.Choose from a full line of connectors and configurations,including pressure sealing caps and plugs in sizes to fit 3/8"and 1/2" tubing. MPX couplings offer optional locking sleevesto further guard against accidental disconnects. In addition,coupling halves can be rotated when connected reducingtube kinks.This graph is intended to give you a general idea of the performancecapabilities of each product line. The shaded area of each graph representsthe operating range of the product family, i.e., upper and lower valuesare shown. Therefore, depending on the exact coupling configurationsselected, you can reasonably expect values to fall within the shaded area.FeaturesErgonomic thumb latchUSP Class VI materialsSterilizable by autoclave, Et0,e-beam, or gammaParting line-free hose barbBSE/TSE free materialsBenefitsEasy to operate – even with gloved handsMeet biocompatibility requirementsReusable, yet economical enough toallow disposabilityEliminates potential leak pathMeet ADCF requirements78
Product DimensionsAAA = Height/DiameterB = Total LengthBBCoupling BodiesTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. FLOW STRAIGHT THRU A B1/2" ID 12.7mm ID .500" MPX17803 1.28 (32.5) 1.96 (49.8)TERMINATIONIN-LINEHOSE BARB WITHLOCKTUBING SIZE METRIC EQ. FLOW STRAIGHT THRU A B1/2" ID 12.7mm ID .500" MPXK17803 1.28 (32.5) 1.96 (49.8)TERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINEHOSE BARB WITHLOCKTUBING SIZE METRIC EQ. FLOW STRAIGHT THRU A B1/2" ID 12.7mm ID .500" MPX17839 1.28 (32.5) 1.96 (49.8)TUBING SIZE METRIC EQ. FLOW STRAIGHT THRU A B1/2" ID 12.7mm ID .500" MPXK17839 1.28 (32.5) 1.96 (49.8)Coupling InsertsTERMINATIONIN-LINEHOSE BARBTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. FLOW STRAIGHT THRU O-RING A B3/8" ID 9.5mm ID .375" MPX22603M Silicone Seal USP Class VI .85 (21.6) 1.90 (48.3)1/2" ID 12.7mm ID .500" MPX22803M Silicone Seal USP Class VI .85 (21.6) 1.90 (48.3)TUBING SIZE METRIC EQ. FLOW STRAIGHT THRU O-RING A B3/8" ID 9.5mm ID .375" MPX22639M Silicone Seal USP Class VI .85 (21.6) 1.90 (48.3)1/2" ID 12.7mm ID .500" MPX22839M Silicone Seal USP Class VI .85 (21.6) 1.90 (48.3)MPX SERIESSEALING CAP SEALING CAP W/LOCK A BMPX32003 MPXK32003 1.28 (32.5) 1.67 (42.4)Mating PartsSEALING CAP SEALING CAP W/LOCK A BMPX32039 MPXK32039 1.28 (32.5) 1.67 (42.4)SEALING PLUG O-RING A BMPX30003M Silicone Seal USP Class VI 1.10 (27.9) 1.66 (42.2)Mating PartsSEALING PLUG O-RING A BMPX30039M Silicone Seal USP Class VI 1.10 (27.9) 1.66 (42.2)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.79
BACK-TO-BACKMPC/MPX Back-to-Back Body Adaptersallow end users the flexibility of connecting off-the-shelf singleusesystems that may feature identical coupling connections atthe end of their tubing. A version with both MPC and a largerformat MPX body will essentially provide a reducing option forusers who need to transition from larger-sized tubing to smallersizedtubing on two different single-use systems.Actual sizeBACK-TO-BACK<strong>Specifications</strong>Pressure: Vacuum to 60 psi, 4.14 barTemperature:-40°F to 300°F (-40°C to 149°C)Materials:Main Components:Polycarbonate (purple tint), USP Class VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFThumb Latches:Polycarbonate (white), USP Class VI, ADCFPolysulfone (amber tint), USP Class VI, ADCFSterilization:Gamma: Up to 50 kGy irradiation.Autoclave:Polycarbonate: Up to 250°F (121°C) for 30 minutes,up to 10 repetitions. Sterlize uncoupled only.Polysulfone: Up to 270°F (132°C) for 60 minutes,up to 25 repetitions. Sterlize uncoupled only.Termination Sizes:1/2" ID hose barb (12.7mm), 3/8" hose barb(9.5mm) and 3/4" sanitaryAFeaturesCompatible with MPC and MPXSeries insertsTubing Reduction OptionErgonomic thumb latchesBSE/TSE free materialsBenefitsEasy conversion to industry standardconnections or single-use systemsAllows easy transition between multiplesize tubing from 1/8" to 1/2" IDEasy to operate - even with gloved handsMeet ADCF requirementsBA = Height/DiameterB = Total LengthBack-To-Back Body AdaptersPART NUMBER TYPE A BMPC17C1703 MPC to MPC .96 (24.5) 1.81 (46.0)MPX17X1703 MPX to MPX 1.28 (32.5) 2.13 (54.1)MPC17X1703 MPC to MPX 1.28 (32.5) 2.44 (62.0)Back-To-Back Body AdaptersPART NUMBER TYPE A BMPC17C1739 MPC to MPC .96 (24.5) 1.81 (46.0)MPX17X1739 MPX to MPX 1.28 (32.5) 2.13 (54.1)MPC17X1739 MPC to MPX 1.28 (32.5) 2.44 (62.0)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.80
FeaturesBenefitsSANITARYSERIESSanitary couplings attach directly to 3/4", 1" and1-1/2" sanitary terminations to provide greater flexibility forintegrating components into single-use or hybrid processsystems. Standard bag systems with quick couplings can be easily connected toequipment with sanitary terminations, while single-use cartridge filters can beconverted to incorporate quick couplings for greater system modularity.3/4", 1" and 1-1/2" sanitary Install to equipment with sanitaryterminationsgaskets and sanitary clampsCompatible with MPC and MPXSeries couplingsIntegral coupling adaptorBSE/TSE free materialsActual sizeQuick and easy connections toindustry standard plastic couplingson single-use bags and tube setsProvides flexibility to easily convertsanitary terminations on filtercartridge or equipmentMeet ADCF Requirements<strong>Specifications</strong>Pressure:Vacuum to 60 psi, 4.14 barTemperature:-40°F to 300°F (-40°C to 149°C)Materials:Main components:Polysulfone (amber tint), USP Class VI, ADCFO-rings (mating insert): Silicone (clear),platinum-cured, USP Class VI, ADCFSterilization:Gamma: Up to 50 kGy irradiationAutoclave: Up to 270°F (132°C) for 60 minutes,up to 25 repetitions. Sterilize uncoupled only.Termination Sizes:3/4", 1" and 1-1/2" sanitaryAABBESANITARY SERIESCoupling BodiesA = Height/DiameterB = Total Length (including valve)E = Outside DiameterCoupling InsertsPART NO. SIZE A B EMPC3301239 3/4" .98 (24.9) 1.40 (35.6) 1.0 (25.4)MPX3301239 3/4" 1.28 (32.5) 1.70 (43.2) 1.0 (25.4)MPC3301639 1" 1.50 (38.1) 1.40 (35.6) 1.50 (38.1)PART NO. SIZE O-RING A BMPC44012T39M 3/4" Silicone Seal USP Class VI .98 (24.9) 1.40 (35.6)MPC44024T39M 1-1/2" Silicone Seal USP Class VI 1.98 (50.3) 1.40 (35.6)MPX44012T39M 3/4" Silicone Seal USP Class VI .98 (24.9) 1.71 (43.4)MPX44024T39M 1-1/2" Silicone Seal USP Class VI 1.98 (50.3) 1.71 (43.4)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: QD sanitary couplings are compatible with both stainless steel and plastic clamps. Clamps and gaskets arereferenced for illustration and are not available through Colder.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.81
Actual sizeSANIQUIKSERIES<strong>Specifications</strong>Pressure:Vacuum to 60 psi, 4.14 barTemperature:-40° F to 300° F (-40° C to 149° C)Materials:Main component: 316L stainless steelO-rings: Silicone (clear), platinum-cured, USP Class VI,ADCFSterilization: AutoclaveTermination Sizes:3/4", 1" and 1-1/2" sanitaryColder’s SaniQuik connection answers the question of how to integrate single-usecomponents with your existing stainless processing equipment. This integral sanitary terminationattaches to hard-plumbed systems with tri-clover clamps. Once attached it permits quick andeasy connection to single-use bag systems, manifolds or tube sets with Colder disposablecoupling bodies. SaniQuik connections reduce sanitary gasket replacement, enabling costeffectivemedia transfer solutions for feeding, harvesting or sampling applications.FeaturesBenefits3/4" and 1-1/2" sanitary Connect to hard plumbed systems with sanitarystandard terminations gaskets and sanitary clampsCompatible withMPC & MPX SeriesIntegral coupling adaptorBSE/TSE free materialsQuick and easy connections to industrystandard plastic couplings on single-usebag and tube setsDisconnecting coupling reduces sanitary gasketreplacementMeet ADCF requirementsBA = Height/DiameterB = Total LengthAConnectionsSANIQUIK SERIESAccessoriesDESCRIPTIONSILICONE SEALUSP CLASS VIDESCRIPTIONPLATINUM-CUREDUSP CLASS VIREPLACEMENTSEALSMATING SANITARY SANITARYPART NO. COUPLING SIZE BORE A BSQCC221212M MPC Series 3/4" 3/4" .98" (24.9) 1.39" (35.3)SQCC222424M MPC Series 1-1/2" 1-1/2" 1.98" (50.3) 1.50" (38.1)SQCX221212M MPX Series 3/4" 3/4" .98" (24.9) 1.43" (39.1)SQCX222416M MPX Series 1-1/2" 1" 1.98" (50.3) 1.50" (38.1)SQCX222424M MPX Series 1-1/2" 1-1/2" 1.98" (50.3) 1.50" (38.1)PART NO. MATING SANIQUIK2260100 SQCC221212M, SQCC222424M2260200 SQCX221212M, SQCX222416M, SQCX222424MAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.82
The MPU’s twist-to-connectdesign features an easy-to-use lockingmechanism that guards against accidentaldisconnects and provides a reliable, secureconnection. A 3/4" hose barb providessmooth, rapid media transfer.Actual sizeMPU SERIES<strong>Specifications</strong>Pressure: Vacuum to 35 psi, 2.41 barTemperature:-40°F to 300°F (-40°C to 149°C)Materials:Main components:Polysulfone (amber tint), USP Class VI, ADCFO-rings: Silicone (clear), platinum-cured, USP Class VI,ADCFSterilization:Gamma: Up to 50 kGy irradiationAutoclave: Up to 270°F (132°C) for 60 minutes, up to25 repetitions. Sterilize uncoupled only.Tubing Sizes: 3/4" ID, 19.0mm IDFeaturesBenefits3/4" hose barb Facilitates rapid filland empty ofbioprocessing bagsLocking featureGuards againstaccidental disconnectsSharp barb endMinimizes fluid turbulence anddead spaceShrouded, leak-free Protect valuable fluids andseal & smooth,eliminate potential to contaminateinternal flow path fluid pathBSE/TSE free materials Meet ADCF requirementsProduct DimensionsABBCoupling BodiesA = Height/DiameterB =Total Length (including valve)TERMINATIONIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU A B3/4’’ ID 19.1mm ID .710" MPU171239 1.75 (44.5) 2.37 (60.2)Coupling InsertsTERMINATIONIN-LINEHOSE BARBTUBING METRIC EQ. FLOW STRAIGHT THRU O-RING A B3/4’’ ID 19.1mm ID .710" MPU221239M Silicone Seal 1.56 (39.6) 2.88 (73.2)USP Class VIMating Parts SEALING CAP MATERIAL A BMPU32039 Polysulfone 1.75 (44.5) .79 (20.1)MPU SERIESSEALING PLUG O-RING MATERIAL A BMPU30039M Silicone Seal Polysulfone 1.56 (39.6) 1.38 (35.1)USP Class VIAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.83
HFC39 SERIESActual sizeHFC39 SERIES<strong>Specifications</strong>Pressure: Vacuum to 125 psi, 8.62 barTemperature:-40°F to 280°F (-40°C to 138°C)Materials:Main components:Polysulfone (amber tint), USP Class VI, ADCFO-rings: Silicone (clear), platinum-cured,USP Class VI, ADCFSprings: 316 stainless steelSterilization:Gamma: Up to 50 kGy gamma irradiation. Sterilizecoupled or uncoupled.Autoclave: Up to 270°F (132°C) for 60 minutes.Up to 25 repetitions for uncoupled units and up toone repetition for coupled units.Tubing Sizes:1/4", 3/8" and 1/2" ID6.4mm, 9.5mm and 12.7mm IDHFC39 Series aseptic disconnect couplingsprevent external organisms from entering into the media flow pathupon disconnection. Automatic shutoff valves close off the flow pathaseptically protecting valuable media while also eliminating the needfor pinch clamps and tube welders. The easy-to-use thumb latchdesign provides a secure, leak-free connection and enables one-handdisconnects.FeaturesSimple One-StepDisconnectionAutomatic shutoff valvesAudible “click”LightweightBSE/TSE free materialsBenefitsMaintains media sterility in eachhalf by preventing externalorganisms from entering theflow pathStop flow and eliminate needfor pinch clampsProvides confidence of a secureconnectionEasy integration with single-useassembliesMeet ADCF requirements84
AProduct DimensionsBBA = Height/DiameterB = Total Length (including valve)Coupling BodiesTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. FLOW SHUTOFF A B1/4" ID 6.4mm ID 1/4" HFCD17439M 1.44 (36.6) 2.82 (71.6)3/8" ID 9.5mm ID 3/8" HFCD17639M 1.44 (36.6) 2.82 (71.6)1/2" ID 12.5mm ID 3/8" HFCD17839M 1.44 (36.6) 2.82 (71.6)Coupling InsertsTERMINATIONIN-LINEHOSE BARBTUBING SIZE METRIC EQ. FLOW STRAIGHT THRU SHUTOFF A B1/4" ID 6.4mm ID 1/4" HFC22439M HFCD22439M 1.00 (25.4) 2.02 (51.3)3/8" ID 9.5mm ID 3/8" HFC22639M HFCD22639M 1.00 (25.4) 2.02 (51.3)1/2" ID 12.5mm ID 3/8" HFC22839M HFCD22839M 1.00 (25.4) 2.02 (51.3)SEALING CAP MATERIAL A BHFC32039 Polysulfone 1.44 (36.6) 2.73 (69.3)Mating PartsHFC39 SERIESSEALING PLUG O-RING MATERIAL A BHFC30039M Silicone Seal Polysulfone 1.00 (25.4) 1.81 (46.0)USP Class VIAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.DID YOU KNOW... We offer a full line of single-use products? Biopharmaceuticalmanufacturers now have an extensive range of options for sterile connecting and steriledisconnecting single-use systems without the need for a laminar flow hood.AseptiQuik ® Connectors enable operatorsto make a quick and easy sterile connectionbetween two single-use systems, even in nonsterileenvironments.HFC39 sterile disconnect couplings feature quickconnect functionality with sterile disconnectcapability by preventing external organismsfrom entering into the media flow path upondisconnection.AseptiQuik DC Connectors enable operatorsto make both a sterile connection and a steriledisconnection, all in one connector.Steam-Thru ® and Steam-Thru II Connectors allowquick and easy sterile connections betweenstainless steel biopharmaceutical processingequipment and single-use bag and tube systems.AseptiQuik STC Connectors allow operators touse a Steam-In-Place (SIP) process to connectan AseptiQuik Sterile Connector to stainlessprocessing equipment.All of our bioprocessing connections are manufactured in an ISO Class 7 certifiedcleanroom and meet USP Class VI and ADCF requirements. Contact us for validationreports, biocompatibility and extractables data.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.85
ASEPTIQUIK CONNECTORPatent PendingActual sizeAseptiQuik Connectors provide quick andeasy sterile connections, even in non-sterile environments.AseptiQuik’s “CLICK-PULL-TWIST” design enables users totransfer media easily with less risk of operator error. Theconnector’s robust design provides reliable performancewithout the need for clamps, fixtures or tube welders.Biopharmaceutical manufacturers can make sterileconnections with the quality and market availability theyexpect from the leader in single-use connection technology.ASEPTIQUIKCONNECTORAseptiQuik <strong>Specifications</strong>Pressure: Up to 60 psi, 4.1 barTemperature:39°F to 104°F (4°C to 40°C)Typical Flow Rate:C V= 14.4 maxSterilization:Gamma: Up to 50kGy irradiationAutoclave:High Temp (HT) Version:Up to 266°F (130°C) for 30 minutesTermination Sizes:1/2" ID hose barb (12.7mm), 3/8" hose barb(9.5mm) and 3/4" sanitaryMaterials:Main Components:Polycarbonate (white), USP Class VI, ADCFLock Ring:Polycarbonate (blue), USP Class VI, ADCFPull Tabs:Polycarbonate (blue, standard version),USP Class VI, ADCFPolycarbonate (white, HT version),USP Class VI, ADCFCaps:Polypropylene (clear), USP Class VI, ADCFSeals:Silicone (clear), platinum-cured, USP Class VI,ADCFMembrane:Polyethylene (standard version)Hydrophobic polyethersulfone (HT version)FeaturesCLICK-PULL-TWIST DesignMembrane pull tabsRobust ConstructionIntegrated Lock RingColder ClickMarket AvailabilityBenefitsIntuitive three-step connection processreduces risk of operator errorEnsure simultaneous and secure removalof both membranesRepeatable and reliable performance withno additional hardware requiredSecures final connection preventingdisassemblyAudible confirmation of completedassembly stepsOpen access through multiple supplychain partnersThis graph is intended to give you a general idea of theperformance of the product.Visit us atwww.colder.com/aseptiquik or call651-645-0091 for more information.86
CCProduct DimensionsAAA = Height/DiameterB = Total LengthC = Hose Barb LengthBBTERMINATION1/2" HOSE BARB3/8" HOSE BARB3/4" SANITARYPART NO. A B CAQC17008 2.36 (59.9) 2.95 (74.9) 0.89 (22.6)AQC17006 2.36 (59.9) 2.74 (69.6) 0.65 (16.5)AQC33012 2.36 (59.9) 2.73 (69.3) 0.70 (17.8)with Blue Pull TabsCoupling BodiesTERMINATION1/2" HOSE BARB3/8" HOSE BARB3/4" SANITARYTERMINATION1/2" HOSE BARB3/8" HOSE BARB3/4" SANITARYPART NO. A B CAQC17008HT 2.36 (59.9) 2.95 (74.9) 0.89 (22.6)AQC17006HT 2.36 (59.9) 2.74 (69.6) 0.65 (16.5)AQC33012HT 2.36 (59.9) 2.73 (69.3) 0.70 (17.8)PART NO. A B CAQC22008 2.50 (63.5) 2.99 (75.9) 0.89 (22.6)AQC22006 2.50 (63.5) 2.90 (73.7) 0.65 (16.5)AQC44012 2.50 (63.5) 2.80 (71.1) 0.70 (17.8)Coupling Bodies - High Temperaturewith White Pull Tabswith Blue Pull TabsCoupling InsertsASEPTIQUIK CONNECTORCoupling Inserts - High TemperatureTERMINATION1/2" HOSE BARB3/8" HOSE BARB3/4" SANITARYPART NO. A B CAQC22008HT 2.50 (63.5) 2.99 (75.9) 0.89 (22.6)AQC22006HT 2.50 (63.5) 2.90 (73.7) 0.65 (16.5)AQC44012HT 2.50 (63.5) 2.80 (71.1) 0.70 (17.8)with White Pull TabsCLICK-PULL-TWIST Assembly Procedure1 2 3Align maleand femalecouplings, pushtogether until“Colder Click”confirmation.Slight rotationof lock ring maybe requiredfor properalignment prior toconnection.Snap membrane, pulltabs together and pullfrom connector.Twist the blue lock ringclock-wise until “ColderClick” and rib to arrowalignment confirms securefinal connection.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.87
ASEPTIQUIK DC CONNECTORPatent PendingActual sizeAseptiQuik DC Connectors are the firstall-in-one single-use connection technology to offer both asterile connection and a sterile disconnection. With theAseptiQuik DC Connector, manufacturers can make a quickand easy sterile connection and disconnection, even innon-sterile environments.ASEPTIQUIK DCCONNECTORAseptiQuik DC’s intuitive “CLICK-PULL-TWIST” design enablesusers to transfer media easily with less risk of operator error.After transfer is complete, the connector features a simple one-stepdisconnection that maintains media sterility by preventing external organismsfrom entering into the media flow path. The connector’s robust design andautomatic shutoff valves provide reliable performance without the need forsanitary clamps, fixtures or tube welders.AseptiQuik DC <strong>Specifications</strong>Pressure: Up to 60 psi, 4.1 barTemperature:39°F to 104°F (4°C to 40°C)Sterilization:Gamma: Up to 50kGy irradiationAutoclave:High Temp (HT) Version:Up to 266°F (130°C) for 30 minutesTermination Sizes:1/4", 3/8" and 1/2" (6.4mm, 9.5mm and 12.7)Materials:Main Components:Polycarbonate (white), USP Class VI, ADCFLock Ring:Polycarbonate (blue), USP Class VI, ADCFPull Tabs:Polycarbonate (blue, standard version),USP Class VI, ADCFPolycarbonate (white, HT version),USP Class VI, ADCFCaps:Polypropylene (clear), USP Class VI, ADCFSeals:Silicone (clear), platinum-cured, USP Class VI,ADCFMembrane:Polyethylene (standard version)Hydrophobic polyethersulfone (HT version)Springs:316 stainless steelFeaturesCLICK-PULL-TWIST DesignSimple One-Step DisconnectionMembrane Pull TabsRobust ConstructionColder ClickMarket AvailabilityBenefitsIntuitive three-step connection processreduces risk of operator errorMaintains media sterility in each half bypreventing external organisms fromentering the flow pathEnsure simultaneous and secure removalof both membranesRepeatable and reliable performance withno additional hardware requiredAudible confirmation of completedassembly stepsOpen access through multiple supplychain partnersThis graph is intended to give you a general idea of theperformance of the product.88
CProduct DimensionsAA =B =C =Height/Diameter (With cap)Total Length (With cap)Hose Barb LengthBTERMINATION1/4" HOSE BARB3/8" HOSE BARB1/2" HOSE BARBPART NO. A B CAQCDC17004 2.36 (59.9) 5.33 (135.4) 0.60 (15.2)AQCDC17006 2.36 (59.9) 5.33 (135.4) 0.60 (15.2)AQCDC17008 2.36 (59.9) 5.62 (142.7) 0.89 (22.6)with Blue Pull TabsCoupling BodiesTERMINATION1/4" HOSE BARB3/8" HOSE BARB1/2" HOSE BARBTERMINATION1/4" HOSE BARB3/8" HOSE BARB1/2" HOSE BARBPART NO. A B CAQCDC17004HT 2.36 (59.9) 5.33 (135.4) 0.60 (15.2)AQCDC17006HT 2.36 (59.9) 5.33 (135.4) 0.60 (15.2)AQCDC17008HT 2.36 (59.9) 5.62 (142.7) 0.89 (22.6)PART NO. A B CAQCDC22004 2.50 (63.5) 5.41 (137.4) 0.60 (15.2)AQCDC22006 2.50 (63.5) 5.41 (137.4) 0.60 (15.2)AQCDC22008 2.50 (63.5) 5.70 (144.8) 0.89 (22.6)Coupling Bodies - High Temperaturewith White Pull Tabswith Blue Pull TabsCoupling InsertsCoupling Inserts - High TemperatureASEPTIQUIK DC CONNECTORTERMINATION1/4" HOSE BARB3/8" HOSE BARB1/2" HOSE BARBPART NO. A B CAQCDC22004HT 2.50 (63.5) 5.41 (137.4) 0.60 (15.2)AQCDC22006HT 2.50 (63.5) 5.41 (137.4) 0.60 (15.2)AQCDC22008HT 2.50 (63.5) 5.70 (144.8) 0.89 (22.6)with White Pull TabsCLICK-PULL-TWIST Assembly Procedure123DisconnectAlign male and female couplings,push together until audible“Colder Click” confirmation.Slight rotation of lock ring maybe required for proper alignmentprior to connection.Snap membrane, pull tabstogether and pull fromconnector.Twist the blue lock ring clockwiseuntil “Colder Click”and rib to arrow alignmentconfirms secure finalconnection.When fluid transfer isfinished, press the thumblatch down to complete thesterile disconnection. Bothhalves will remain sterile.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.89
STEAM-THRU CONNECTIONSActual sizePatentedSTEAM-THRU CONNECTIONSSteam-Thru ® Connections allow a quickand easy sterile connection between biopharmaceuticalprocessing equipment and disposable bag and tube assemblies. The single-usedesign saves time and money by eliminating unnecessary cleaning proceduresand reducing validation burden associated with reusable components.<strong>Specifications</strong>Pressure:Steam position:Up to 30 psi, 2.07 bar (Steam-Thru) up to35 psi, 2.41 bar (Steam-Thru II)Flow position: Vacuum to 20 psi, 1.38 barTemperature:Steam position:Up to 266°F (130°C) for 60 minutes (Steam-Thru)Up to 275°F (135°C) for 60 minutes (Steam-Thru II)Flow position: 39°F to 104°F (4°C to 40°C)Materials:Connection: Polysulfone, USP Class VI, ADCFO-rings: Silicone (clear), platinum-cured, USP Class VI,ADCFTear-away sleeve: Polyethylene or polycarbonate(Steam-Thru only), USP Class VI, ADCFTypical Flow Rate:C V= 4.2 - 4.6 (Steam-Thru)C V= 5.2 - 8.0 (Steam-Thru II)Sterilization:Gamma: Up to 50 kGy gamma irradiationAutoclave: Up to 265°F (129°C) for 60 minutes,up to two cycles (applies only to part numbersSTC1700500-STC1700800 and STC2020000-STC2021000)SIP process:Up to 266°F (130°C) for 60 minutes (Steam-Thru)Up to 275°F (135°C) for 60 minutes (Steam-Thru II)Termination Sizes:3/8" to 1/2" ID, 9.5mm to 12.7mm ID hose barb(Steam-Thru)3/8" to 1/2" ID, 9.5mm to 12.7mm ID hose barband 3/4" sanitary (Steam-Thru II)FeaturesInnovative three-portdesignPatented valvedesignThumb latch/ Tear-awaysleeveIndustry standardterminationsBSE/TSE free materialsBenefitsAllows a true steam-through SIP process whicheliminates "dead legs" and the need for laminarflow hoodsAllows sterile connection and disconnectionand permits high media flow rateSecures valve position, provides visual indicatorof process stageSpeed connect to the process equipmentand connect to popular sizes of flexible tubingMeet ADCF requirements90
DESCRIPTIONWITHPOLYETHYLENESLEEVEDESCRIPTIONWITHAUTOCLAVABLEPOLYCARBONATESLEEVESteam-Thru ® ConfigurationsSteam-Thru ® Connection’s patented three-portdesign allows steam to pass directly through thelower ports to "steam on" to stainless equipment.After the SIP cycle is completed, the connector’svalve is actuated, creating a sterile flow path tosingle-use systems.AHBF = Actuated LengthPART NO. TERMINATIONS A B F G HSTC1700000 3/4" x 3/4" sanitary x 1/2" HB 1.20 (30.5) 5.09 (129.3) 4.44 (112.8) 2.00 (50.8) 0.89 (22.6)STC1700100 3/4" x 3/4" sanitary x 3/8" HB 1.20 (30.5) 4.80 (121.9) 4.15 (105.4) 2.00 (50.8) 0.60 (15.2)STC1700200 3/4" x 1-1/2" sanitary x 1/2" HB 1.20 (30.5) 5.09 (129.3) 4.44 (112.8) 2.00 (50.8) 0.89 (22.6)STC1700300 3/4" x 1-1/2" sanitary x 3/8" HB 1.20 (30.5) 4.80 (121.9) 4.15 (105.4) 2.00 (50.8) 0.60 (15.2)PART NO. TERMINATIONS A B F G HSTC1700500 3/4" x 3/4" sanitary x 1/2" HB 1.20 (30.5) 5.09 (129.3) 4.44 (112.8) 2.00 (50.8) 0.89 (22.6)STC1700600 3/4" x 3/4" sanitary x 3/8" HB 1.20 (30.5) 4.80 (121.9) 4.15 (105.4) 2.00 (50.8) 0.60 (15.2)STC1700700 3/4" x 1-1/2" sanitary x 1/2" HB 1.20 (30.5) 5.09 (129.3) 4.44 (112.8) 2.00 (50.8) 0.89 (22.6)STC1700800 3/4" x 1-1/2" sanitary x 3/8" HB 1.20 (30.5) 4.80 (121.9) 4.15 (105.4) 2.00 (50.8) 0.60 (15.2)GSTEAM-THRU CONNECTIONSThese graphs are intended to give youa general idea of the performancecapabilities of each product line. Theshaded area of each graph representsthe operating range of the productfamily, i.e., upper and lower values areshown. Therefore, depending on theexact coupling configurations selected,you can reasonably expect values tofall within the shaded area.Steam-Thru IIConfigurationsBSteam-Thru II Connections offerthe flexibility of "steam on"and "steam off" functionality.The innovative design allowsthe valve to be returned tothe steam position enablinga second SIP cycle followingmedia transfer. The "steam off" disconnection ofsingle-use systems minimizes cross-contaminationrisks associated with reusable components.AF = Actuated LengthHGTERMINATIONPART NO. TERMINATIONS A B F G HSTC2020000 3/4" x 3/4" sanitary x 1/2" HB 1.42 (36.1) 6.84 (173.7) 5.93 (150.6) 2.40 (61.0) .88 (22.4)STC2020100 3/4" x 3/4" sanitary x 3/8” HB 1.42 (36.1) 6.76 (171.7) 5.93 (150.6) 2.40 (61.0) .80 (20.3)STC2020200 3/4" x 1-1/2" sanitary x 1/2" HB 1.42 (36.1) 6.84 (173.7) 5.93 (150.6) 2.40 (61.0) .88 (22.4)STC2020300 3/4" x 1-1/2" sanitary x 3/8" HB 1.42 (36.1) 6.76 (171.7) 5.93 (150.6) 2.40 (61.0) .80 (20.3)STC2020900 3/4" x 3/4" sanitary x 3/4" sanitary 1.42 (36.1) 6.60 (167.6) 5.93 (150.6) 2.40 (61.0) .62 (15.7)STC2021000 3/4" x 1-1/2" sanitary x 3/4" sanitary 1.42 (36.1) 6.60 (167.6) 5.93 (150.6) 2.40 (61.0) .62 (15.7)All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.91
STEAM-THRU CONNECTIONSSTEAM POSITIONTear-awaysleaveSteam flowSteam-Thru ProcessProcessEquipmentSingle-use bag ortubing assemblyFLOW POSITIONMedia flowFROM or TOProcessEquipmentTo steam trapSteam flows from the process equipmentthrough the Steam-Thru to sterilize theconnection. With the tear-away sleeve inplace, the transfer of fluid to or from thebioreactor is prevented.When the tear-away sleeve is removed,the Steam-Thru is actuated, theconnection to the steam trap is disabledand a sterile flow path is establishedbetween the process equipment and thedisposable system.DID YOU KNOW ... there are many advantages of single-use systems?Increase ProductivityThe reliability of single-use systems results inincreased productivity through the reduction ofsystem downtime associated with cleaning andcleaning validation.Add FlexibilitySingle-use systems can be easily modified foralternative media handling.Minimize RiskThe integration of single-use systems can helpminimize the risk of media contamination inmulti-product manufacturing.Reduce CostCost savings include the reduced chemical andutility expenses of cleaning and labor.Don’t forget: you can access manyfeature articles on Single-Usetechnology at www.colder.com.92| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Steam-Thru II Process: An audible "click" and the visual indicator of the raised thumb latchprovide assurance that the valve is locked in the flow or steam position.STEAM ON POSITIONSteam flowProcessEquipmentSingle-use bag ortubing assemblyFLOW POSITIONMedia flowFROM or TOProcessEquipmentSTEAM OFF POSITIONSteam flowProcessEquipmentSTEAM-THRU CONNECTIONSTo steam trapTo steam trapSteam flows from the processequipment through the Steam-Thru II creating a "steam on" sterileconnection.Once the valve is locked in the flowposition a sterile flow path has beencreated allowing media transfer.Once the valve is locked in the steamposition, complete a second SIP cycleto "steam off" the connection.TRANSITIONTO FLOWOnce the "steam on"cycle is complete andthe steam trap hasbeen closed, simplypress the thumblatch to allow thevalve to be moveddown tothe flowposition.ThumblatchrecessedduringvalvetransitionTRANSITIONTO STEAMOnce media transferis complete, simplypress the thumblatch to allow thevalve to be movedback up to the steamposition.Thumblatchrecessedduringvalvetransition| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.93
CQH/CQV SERIESThe CQH and CQV Series are designed forhigh-purity use and feature all plastic construction. Molded,virgin materials and lubricant-free design enable use in the mostdemanding applications. Broad chemical compatibility andcleanroom manufacturing make them ideal for use in critical wetprocesses.FeaturesBenefits100% metal free No risk of metal contaminantsor corrosionHigh flow valve design High flow in a compact packageDisconnect under Speeds servicing and reducespressurerisk of injuryPolypropylene and PVDF Broad chemical compatibilityVisit www.colder.com for informationabout CQH and CQV modified product options.CQH/CQV SERIES<strong>Specifications</strong>CQH Pressure: 0 - 80 psig (0 - 5.5 bar)CQH Temperature: 32°F to 225°F (0°C to 107°C)CQH Materials:Main components:Natural, virgin polypropyleneValve o-rings:Viton ® FKM (black)External insert o-ring:Simriz ® FFKM perfluoro (black)Valve (wetted) and thumb latch spring: PEEK ®Flare nuts: PVDFLubricants: None usedCQV Pressure: 0 - 80 psig (0 - 5.5 bar)CQV Temperature: 0°F to 225°F (-18°C to 107°C)CQV Materials:Main components:Natural, virgin PVDFValve o-rings:Chemraz FFKM perfluoro (white)External insert o-ring:Chemraz FFKM perfluoro (white)Valve (wetted) and thumb latch spring: PEEKFlare nuts: PVDFLubricants: None usedSpillage/air inclusion:~1.5 cc (ml)/disconnect (reconnect)Tubing Sizes:1/4" to 1/2" flare; 3/8" to 3/4" NPTActual sizeNOTE: CQH & CQV are also available with optional PPS springs and ChemrazFFKM or EPDM seals.94These graphs are intended to give you a general idea of the performance capabilities of each product line. The shaded area ofeach graph represents the operating range of the product family, i.e., upper and lower values are shown. Therefore, dependingon the exact coupling configurations selected, you can reasonably expect values to fall within the shaded area.
CC.17"Product DimensionsBABA = Height/DiameterB = Total Length (including valve)C = Hex Size on Main ComponentØ .1.21"1.30"Gasket Thickness: .06"Mounting Hole: 1.21" diameterCoupling Spacing: 1.92" minimumPanel Thickness: .25"PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .25 .03CQH/CQV SERIESCQH Coupling BodiesTERMINATIONT IN-LINETERMINATIONPANEL MOUNTTUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4"ODFlare compression CQHD06100104 1.44 3.323/8" OD Flare compression CQHD06100106 1.44 3.381/2" OD Flare compression CQHD06100108 1.44 3.383/8" Taper Male NPT CQHD06100206 1.44 2.73 .995TUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4" OD Flare compression CQHD06110104 1.82 3.323/8" OD Flare compression CQHD06110106 1.82 3.381/2" OD Flare compression CQHD06110108 1.82 3.373/8" Taper Male NPT CQHD06110206 1.82 2.73 .995CQH Coupling InsertsTERMINATIONIN-LINETUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4" OD Flare compression CQHD06200104 1.00 2.493/8" OD Flare compression CQHD06200106 1.00 2.551/2" OD Flare compression CQHD06200108 1.00 2.563/8" Taper Male NPT CQHD06200206 1.16 1.90 .9953/4" Taper Male NPT CQHD06200212 1.16 2.26 1.05CQV Coupling BodiesTERMINATIONIN-LINETERMINATIONPANEL MOUNTTUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4" OD Flare compression CQVD06100104 1.44 3.313/8" OD Flare compression CQVD06100106 1.44 3.381/2" OD Flare compression CQVD06100108 1.44 3.373/8" Taper Male NPT CQVD06100206 1.44 2.70 1.00TUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4" OD Flare compression CQVD06110104 1.82 3.243/8" OD Flare compression CQVD06110106 1.82 3.381/2" OD Flare compression CQVD06110108 1.82 3.373/8" Taper Male NPT CQVD06110206 1.82 2.70 1.00CQV Coupling InsertsTERMINATIONIN-LINETUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C1/4" OD Flare compression CQVD06200104 1.00 2.413/8" OD Flare compression CQVD06200106 1.00 2.571/2" OD Flare compression CQVD06200108 1.00 2.573/8" Taper Male NPT CQVD06200206 1.16 1.89 1.00All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.95
CQG SERIESCQG SERIES<strong>Specifications</strong>Pressure: 0 - 80 psig (0 - 5.5 bar)Temperature: 32°F to 150°F (0°C to 66°C)Materials:Main components:Natural, virgin polypropyleneSeals: Viton ® FKM (Simriz FFKM optional)Springs (non-wetted): Hastelloy ® CFlare nuts: PVDFLubricants: None usedDual Containment Nutand Panel Mount Fitting:Virgin, natural polypropyleneFlare nuts: PVDFPanel nuts: HDPEPanel mount o-rings: Viton FKMSpillage/air inclusion:
CProduct DimensionsCAABA = Height/DiameterB = Total LengthC =BHex Size on Main ComponentØ 2.000"+.010-.000PANEL MAX. PANEL MIN. PANELOPENING THICKNESS THICKNESSCOUPLING BODIES see drawing .50 .12OR INSERTSTERMINATIONIN-LINEBODIESTERMINATIONIN-LINEINSERTSTUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C3/8" OD Flare compression CQGD06100106 1.96 4.211/2" OD Flare compression CQGD06100108 1.96 4.423/4" OD Flare compression CQGD06100112 1.96 4.491/2" Taper Male NPT CQGD06100208 1.96 3.81 1.00TUBING/THREAD SIZE TERMINATION TYPE SHUTOFF A B C3/8" OD Flare compression CQGD06200106 1.62 4.351/2" OD Flare compression CQGD06200108 1.62 4.453/4" OD Flare compression CQGD06200112 1.62 4.633/8" Taper Male NPT CQGD06200206‡ 1.62 3.81 1.001/2" Taper Male NPT CQGD06200208 1.62 3.95 1.003/4" Taper Male NPT CQGD06200212‡ 1.62 4.15 1.00Coupling BodiesCoupling InsertsCQG SERIES & ACCESSORIESAll measurements are in inches (millimeters) unless otherwise noted.Tubing must meet stated inside and outside diameters.Panel Mount AdaptorDESCRIPTIONPanel mount adapter kit (fits both bodies & inserts)PART NO.CQG06PMKIT01The ChemQuik ® Dual Containment System is an easy way to "double contain" critical chemicallines, protecting plant and personnel in case a primary process line ruptures or "sweats". Thesystem provides a protective secondary line to catch any fluid and routes it to a safe location.ChemQuik ® DualContainment Flare NutsThese fittings work with any ChemQuik coupling with fine thread flare terminations or a common flare style fitting. In addition, thepanel mount version can be mounted into a pump cabinet or other panel mount connection point. The primary linecan then be routed from the coupling directly to a pump, connected to a ChemQuik coupling or to afitting at the panel mount fitting.The “weep port" serves to vent the area between the primary and secondary lines so that pressure cannotbuild up in case of a primary line rupture. The leaking fluid can then be routed to acontainment vessel or to a leak detector.FLARE NUTCQDCNUT0408CQDCNUT0612CQDCNUT0812CQDCNUT1216DESCRIPTIONDual containment nut, 1/4" OD process line x1/2" OD secondary containment line.Dual containment nut, 3/8" OD process line x3/4" OD secondary containment line.Dual containment nut, 1/2" OD process line x3/4" OD secondary containment line.Dual containment nut, 3/4" OD process line x1" OD secondary containment line.FLARE FITTINGCQPMDCNUT0408CQPMDCNUT0612CQPMDCNUT0812CQPMDCNUT1216DESCRIPTIONPanel mount dual containment nut, 1/4" OD Processline x 1/2" OD secondary containment line.Panel mount dual containment nut, 3/8" OD Processline x 3/4" OD secondary containment line.Panel mount dual containment nut, 1/2" OD Processline x 3/4" OD secondary containment line.Panel mount dual containment nut, 3/4" OD Processline x 1" OD secondary containment line.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.97
DRUMQUIK PRO / DRUMQUIK PURPatent PendingDrumQuik ® PRO and DrumQuik ® PURdispensing systems are used with common pumps to createa closed transfer system for both general and high puritychemicals. These easy-to-use products meet the strict safetyrequirements of chemical handling applications as well asthe demands of harsh operating environments. DrumQuik ®dispensing systems minimize chemical exposure and facilitatethe delivery of chemicals from bulk transfer containers to enduse applications.For general chemical dispensing DrumQuik PRO offers a ruggedand cost-effective solution. DrumQuik PUR is a 100% metal free,cleanroom packaged, PVDF product designed specifically forapplications demanding the highest level of purity. All materialsare compliant with FDA standards for food and consumablesapplications.DRUMQUIK PRO / DRUMQUIK PUR<strong>Specifications</strong>Pressure:Uncoupled: Vacuum to 45 psig (3.1 bar)Coupled: Vacuum to drum ratingTemperature:Drum insert: -20°to 120°F (-29°to 49°C)Coupler: HDPE, 32° to 120°F (0° to 49°C)PVDF, 0° to 120°F (-18° to 49°C)Materials:Drum insert & dip-tube:Virgin polyethylene (HDPE)Shipping plug:Virgin polyethylene (HDPE)Coupler:Virgin polypropylene (DrumQuik PRO)Virgin PVDF (DrumQuik PUR)Spring (coupler only):316 stainless steel, Hastelloy ® C, virgin PEEK UHP,PPS or Teflon ® encapsulated 316 stainless steel (TESS)Seals:Coupler seals: EPDM, FKM, Simriz ® UHP FFKMPerfluoroelastomerBung seal: Polyolefin, EPDM, FKMShipping plug seal: EPDM, FKMTorque specifications:2" Buttress - 20ft-lbs (27 N m)BCS 56x4 - 20ft-lbs (27 N m)2" NPS (plastic drum) - 20ft-lbs (27 N m)2" NPS (steel drum) - 15ft-lbs (20 N m)Shipping plug - hand tightNOTE: The torque specifications listed above are generalrecommendations which may need to be adjusted + or – depending onspecific application.The graph above characterizes the flow of the DrumQuik PRO with thecoupler vent port open to the atmosphere and a pump drawing liquid out.Visit www.colder.com/dqpro and click onFlow Performance Graphs for flow performancewith other possible plumbing configurations.98
DRUMQUIK PUR DRUMQUIK PRO & PUR DRUMQUIK PRO & DRUMQUIK PURDRUMQUIK PUR DRUMQUIK PROCouplers: PolypropylenePART NUMBERDQPRO120312DQPRO120208DQPRO120208202DQPRO120208206DQPRO120208207DQPRO120712DQPRO120712202DQPRO120712206DQPRO120712207Couplers: PVDFPART NUMBERDQPUR120112DQPUR120112203DQPUR120112208DQPUR120112209DQPUR120112210DQPUR120112211DESCRIPTION3/4" Hose barb (EPDM seals, 316 SST spring)1/2" Male NPT (EPDM seals, 316 SST spring)1/2" Male NPT (FKM seals, 316 SST spring)1/2" Male NPT (EPDM seals, Hastelloy C spring)1/2" Male NPT (FKM seals, Hastelloy C spring)3/4" Male BSPP (EPDM seals, 316 SST spring)3/4" Male BSPP (FKM seals, 316 SST spring)3/4" Male BSPP (EPDM seals, Hastelloy C spring)3/4" Male BSPP (FKM seals, Hastelloy C spring)3/4" Flare TerminationDESCRIPTIONFKM liquid contact seals, FKM vent seal, PEEK plastic springSimriz ® FFKM liquid contact seals, FKM vent seal,PEEK plastic springFKM liquid contact seals, FKM vent seal, PPS plastic springSimriz FFKM liquid contact seals, FKM vent seal,PPS plastic springFKM liquid contact seals, FKM vent seal, Teflonencapsulated 316 stainless steel (TESS) springSimriz FFKM liquid contact seals, FKM vent seal, Teflonencapsulated 316 stainless steel (TESS) springDrum Inserts: Polyethylene (HDPE)PART NUMBER DESCRIPTIONDQPRO202BUT 2" American buttress thread, EPDM seals (NA plastic drums)DQPRO202BUT202 2" American buttress thread, FKM seals (NA plastic drums)DQPRO2056X4 BCS 56x4 thread, EPDM seals (European plastic drums)DQPRO2056X4202 BCS 56x4 thread, FKM seals (European plastic drums)DQPRO20G2NPSST 2" NPS (ISO G2) thread, EPDM seals(steel drums and IBC caps)DQPRO20G2NPSST202 2" NPS (ISO G2) thread, FKM seals(steel drums and IBC caps)DQPRO20G2NPSPL 2” NPS (ISO G2) thread, EPDM flat bung seal(plastic drums and IBC caps)DQPRO20G2NPSPL202 2” NPS (ISO G2) thread, FKM flat bung seal(plastic drums and IBC caps)DQPUR202BUT 2” American buttress thread, Polyolefin (POE) bung seal,EPDM shipping plug sealDQPUR202BUT202 2” American buttress thread, Polyolefin (POE) bung seal,FKM shipping plug sealDip-Tubes: Polyethylene (HDPE)PART NUMBER DESCRIPTIONDQPRODT0410 13.0" (330mm) long for 5 gal/25L jerry cansDQPRODT0985 35.5" (905mm) long for 55 gal/200L drumsDQPRODT1070 39.0" (990mm) long for 275 gal/1040L IBCsDQPRODT1274 47.0" (1194mm) long for 330 gal/1250L IBCsDQPURDT0410 13.0" (330mm) long for 5 gal/25L jerry cansDQPURDT0985 35.5" (905mm) long for 55 gal/200L drumsDQPURDT1070 39.0" (990mm) long for 275 gal/1040L IBCsDQPURDT1274 47.0” (1194mm) long for 330 gal/1250L IBCsNote: Length indicated in part number is total length when assembled with insert, which is 80mm longerthan the actual length of the dip-tube itself. Additional dip-tube lengths are available by custom order.Assembled Drum Inserts & Dip-TubesPART NUMBER DESCRIPTIONDQPUR2BUT0410 Drum insert assembly, NAMPAC square jerry can, 20L,330mm long (from sealing surface)DQPUR2BUT0985 Drum insert assembly with universal dip-tube (drum),905mm long (from sealing surface)DQPUR2BUT1070 Drum insert assembly with universal dip-tube (drum),990mm long (from sealing surface)DQPUR2BUT1274 Drum insert assembly with universal dip-tube(IBC), 1194mm long (from sealing surface)Note: Drum insert and dip-tube have been assembled in a cleanroom. Length indicated in part numberis total length as measured from the sealing surface of the container to the end of the dip-tube. This is ~80mm longer than the actual length of the dip-tube itself.DrumQuik ® PRO & PURDispensing Connector SystemLocking RingColored CapCouplerCouplerKey RingDrum InsertKey RingLiquidPortBackflowCheck ValveVent Port (1/4" NPT)Shipping Plug(sold assembledwith drum insert)Colored PlugDrum InsertVentCheck ValveFoot Valve(press into bottom of dip-tube)Dip-tubeVapor Management Options:1. OPEN: Vent port left open to atmosphere2. REMOTE: Vent port routed to fume hood,scrubber or vapor recovery system3. CHECKED: Connect vent check valve to allowmake-up air in without allowing fumes to escape4. BLANKET GAS: Connect a Colder quickdisconnect coupling for blanket gas (N 2, CO 2)5. FILTERED: Connect vent filterTo PumpDRUMQUIK PRO / DRUMQUIK PUR| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.99
DRUMQUIK PRO / DRUMQUIK PURDrumQuik ® PRO and DrumQuik PURare changing the world of chemical management with theirunique closed-system design. Innovative DrumQuik systemshelp companies reduce costs, increase worker safety andprotect the environment. From basic chemical handlingto specialty high purity and pharmaceutical applications,DrumQuik dispensing systems make chemical managementcleaner, faster, safer and smarter.DrumQuik PROFeaturesQuick connect/disconnectAutomatic shutoff valveDisposable drum insertPorted vent system forvapor managementMultiple standardthread sizesBenefitsAllows faster drum change-outsStops flow when disconnectedReduces messy handling andchemical exposureAllows make-up air into drumor connection of blanket gas(N 2,CO 2)Can be used with manycommon steel andplastic containersDRUMQUIK PRO / DRUMQUIK PURDrumQuik ® Dispensing Systems forSafer Chemical ManagementWhether you’re dispensing edible oils, condiments,detergents, Diesel Exhaust Fluid (DEF), or industrialchemicals, acids, caustics or solvents, DrumQuik PROand the high purity DrumQuik PUR can make yourprocess cleaner, faster, safer and smarter.Provide the critical connection betweenyour chemical container and the end use processCreate a closed transfer system to protectworkers and keep a cleaner work environmentDrumQuik solutions are available for a variety of containertypes providing interchangeable, reusable connectionsfor:DrumQuik PURFeaturesQuick connect/disconnectAll plastic constructionAutomatic shutoff valveCleanroom manufacturedDisposable drum insertPlastic or steel drumsChemical packsIBCs or totesFor high purity applications DrumQuik PURprovides the assurance of compatibilitywith chemicals used in semiconductor andflat panel production, pharmaceutical andphotovoltaic or solar cell manufacturing.BenefitsAllows faster drum change-outsNo metallic corrosion/contaminationStops flow when disconnectedAssures high level of purityMinimizes chemical exposure &contamination100
ACCESSORIESColor Coding and Keying OptionsColored Key Kits for Physical Coding: PolyethyleneDQPRO PART NUMBER DQPUR PART NUMBER DESCRIPTIONDQPROKEYCPGRY00 DQPURKEYCPGRY00 Key kit for coupler, grayDQPROKEYCPRED01 DQPURKEYCPRED01 Key kit for coupler, redDQPROKEYCPYEL02 DQPURKEYCPYEL02 Key kit for coupler, yellowDQPROKEYCPGRN03 DQPURKEYCPGRN03 Key kit for coupler, greenDQPROKEYCPBRN04 DQPURKEYCPBRN04 Key kit for coupler, brownDQPROKEYCPBLU05 DQPURKEYCPBLU05 Key kit for coupler, blueDQPROKEYCPBLK99 DQPURKEYCPBLK99 Key kit for coupler, blackDQPROKEYCPCOMBO DQPURKEYCPCOMBO One of every coupler key ringand capCouplerDrumQuik ® PRO & PURKey KitsColored CapKeyInstallationToolKey kits for coupler include coupler key ring and cap.DQPROKEYDIRED01 DQPURKEYDIRED01 Key kit for drum insert, redDQPROKEYDIYEL02 DQPURKEYDIYEL02 Key kit for drum insert, yellowDQPROKEYDIGRN03 DQPURKEYDIGRN03 key kit for drum insert, greenDQPROKEYDIBRN04 DQPURKEYDIBRN04 Key kit for drum insert, brownDQPROKEYDIBLU05 DQPURKEYDIBLU05 Key kit for drum insert, blueDQPROKEYDIBLK99 DQPURKEYDIBLK99 Key kit for drum insert, blackDQPROKEYDICOMBO DQPURKEYDICOMBO One of every drum insert key ringand button plugKey kits for drum insert include drum insert key ring and button plug.Color Coded PartsColored Caps & Button Plugs for Visual Coding: PolyethyleneCouplerKey RingDrum insertKey RingColoredButtonPlugShippingPlugPART NUMBERDESCRIPTIONDQPROCAPGRY00Colored cap for coupler, grayDQPROCAPRED01Colored cap for coupler, redDQPROCAPYEL02Colored cap for coupler, yellowDQPROCAPGRN03Colored cap for coupler, greenDQPROCAPBRN04Colored cap for coupler, brownDQPROCAPBLU05Colored cap for coupler, blueDQPROCAPBLK99Colored cap for coupler, blackDQPROCAPCOMBOOne each of every color capDQPROPLUGGRY00Colored button plug for drum insert, grayDQPROPLUGRED01Colored button plug for drum insert, redDQPROPLUGYEL02Colored button plug for drum insert, yellowDQPROPLUGGRN03Colored button plug for drum insert, greenDQPROPLUGBRN04Colored button plug for drum insert, brownDQPROPLUGBLU05Colored button plug for drum insert, blueDQPROPLUGBLK99Colored button plug for drum insert, blackDQPROPLUGCOMBOOne each of every color plug* Colored caps and button plugs can be used with both DrumQuik PRO and DrumQuik PUR.ACCESSORIESColor Coding| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.101
ACCESSORIES1234Easy Installation andDispensingFully press diptubeinto druminsert socket.Place the druminsert assemblyin drum.Turn shippingplug counterclockwisetoremove. (Use alarge, flat bladeor #4 Phillipsscrewdriver.)Insert couplerinto drum insertassembly.ToolsPART NUMBERDESCRIPTION2408900 Torque socket tool (blue, glass-filled nylon)2479100 Bung wrench (aluminum)2375600* Key installation tool (for key kits)*Shipping plug may also be used to install keysDQPURFT08Flaring Tool, 1/2" tubingDQPURFT12Flaring Tool, 3/4" tubingSample Kits(Includes one coupler, one insert and one dip-tube)PART NUMBERDQPRONASAMPDQPRONASAMP207DQPROEUSAMPDQPROEUSAMP207DQPRONPSSTSAMPDQPRONPSSTSAMP207DESCRIPTION2” Buttress drum insert, 905mm dip-tube, 1/2 NPTcoupler (EPDM O-rings, 316 SST spring in coupler)2” Buttress drum insert, 905mm dip-tube, 1/2 NPTcoupler (FKM seals & Hastelloy C spring in coupler)BSC 56x4 drum insert, 905mm dip-tube, 3/4 BSPPcoupler (EPDM seals, 316 SST spring in coupler)BSC 56x4 drum insert, 905mm dip-tube, 3/4 BSPPcoupler (FKM seals & Hastelloy C spring in coupler)2” NPS (ISO G2) drum insert, 905mm dip-tube, 1/2 NPTcoupler (EPDM Bung O-rings, 316 SST spring in coupler)2” NPS (ISO G2) drum insert, 905mm dip-tube, 1/2 NPTcoupler (FKM seals & Hastelloy C spring in coupler)DQPRONPSPLSAMP 2” NPS (ISO G2) drum insert, 905mm dip-tube, 1/2NPT coupler (EPDM Flat Gasket, 316 SST Spring)DQPRONPSPLSAMP207 2” NPS (ISO G2) drum insert, 905mm dip-tube, 1/2NPT coupler (FKM seals & Hastelloy C spring in coupler)DQPURSAMP202DQPURSAMP209Shipping PlugsKit includes 1 Coupler (DQPUR 12 0112 (PEEK & FKM)& 1 assembled Dip-tube (DQPUR 2BUT 0985 202)Kit includes 1 Coupler (DQPUR 12 0112 209 (PPS & SIMRIZ)& 1 Dip-tube assy. (DQPUR 2BUT 0985 202)PART NUMBERDESCRIPTIONDQPROPUMPADInternal 3/4 NPT Thread pump adaptor shipping plug(HDPE, EPDM)DQPROPUMPAD202Internal 3/4 NPT Thread pump adaptor shipping plug(HDPE, FKM)DQPRPUMPAD202Extended shipping plug for venting internal pressure fromDQPROSHPLUGEXdrum (HDPE, EPDM)DQPROSHIPLUGEX202Extended shipping plug for venting internal pressure fromdrum (HDPE, FKM)2007900 Shipping plug for drum insert (Does not include shipping plug o-ring)2290100 Shipping plug o-ring, EPDM2307200 Shipping plug o-ring, FKMDQPURSPShipping Plug with EPDM sealDQPURSP202Shipping Plug with FKM seal5Turn the couplerlocking ringclockwiseuntilstop is reached(approximately 2full turns); valveis opened duringthis process.Visit www.colder.com/dqpro and click onInstallation Guide for more information.Replacement PartsPART NUMBERDESCRIPTIONDQPURDISEALPOEDrum insert POE bung sealDQPURDISEALFEPDrum insert FEP encapsulated silicone bung sealDQPURCPSEALFKMCoupler seal kit (2 seals), FKMDQPURCPSEALSMZCoupler seal kit (2 seals), Simriz2423400 Coupler o-ring kit, EPDM (Includes 2 o-rings)2423500 Coupler o-ring kit, FKM (Includes 2 o-rings)2166000 Drum insert flat gasket, 2" buttress, FDA EPDM2166100 Drum insert flat gasket, 2" buttress, FKM2165800 Drum insert o-ring, 2" NPS (ISO G2) EPDM for steel drums2165900 Drum insert o-ring, 2" NPS (ISO G2) FKM for steel drums2165800 Drum insert o-ring, BCS 56x4, EPDM (same as ISO G2 for steel)2165900 Drum insert o-ring, BCS 56x4, FKM (same as ISO G2 for steel)2525200 Drum insert flat gasket, 2" NPS (ISO G2) EPDM for plastic drums2525300 Drum insert flat gasket, 2" NPS (ISO G2) FKM for plastic drums2594900 Replacement Drum Insert Seal, 2" Buttress, FDAEPDMDQPRO70X6AD70 X 6 Adaptor with EPDM O-RingDQPRO70X6AD20270 X 6 Adaptor with FKM (Viton ® ) O-Rings102| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
AccessoriesPART NUMBERTether/Dust CapDQPROTETHERDESCRIPTIONTether/Dust Cap for use with DrumQuik PRO shipping plugsand couplers (PVC, Vinyl)Torque ToolCoupler Vent Port Options2879800 Vent check valve, 1/2" ID x 1/4" male NPT(316 SST, Santoprene)2879801 Vent check valve, 1/2" ID x 1/4" male NPT(Hastelloy® C, FKM)DQPROFIL01Air filter, coupler vent port, 1/4" male NPT(polypropylene, 70 micron)APCD24004Vent coupling insert, 1/4" male NPT(Acetal, 316 SST, Buna-N)APCD17004SHVent coupling body with shroud, 1/4" hose barb(Acetal, 316 SST, Buna-N)APCD17006SHVent coupling body with shroud, 3/8" hose barb(Acetal, 316 SST, Buna-N)EFCD24412Vent coupling insert, 1/4" male NPT(Polypropylene, 316 SST, EPDM)EFCD17412Vent coupling body, 1/4" hose barb(Polypropylene, 316 SST, EPDM)EFCD17612Vent coupling body, 3/8" hose barb(Polypropylene, 316 SST, EPDM)NOTE: Parts listed above are suggested for use in the vent port, but any 1/4" NPT Colder coupling can be used forblanket gas applications (see page 97.)Bung WrenchAir FilterRefer tospecificationsfor torquerequirementsBackflow Prevention Options | Material: Polypropylene2478900 Check valve for couplers,1/2" female NPT x 1/2" male NPT (EPDM, 302 SST)2478901 Check valve for couplers,1/2" female NPT x 1/2" male NPT (FKM, 302 SST)2478902 Check valve for couplers,1/2" female NPT x 1/2" male NPT (EPDM, Hastelloy C)2478903 Check valve for couplers,1/2" female NPT x 1/2" male NPT (FKM, Hastelloy C)2479000 Foot valve for dip-tube, 1/2" hose barb (EPDM, 316 SST)2479001 Foot valve for dip-tube, 1/2" hose barb (FKM, 316 SST)2479002 Foot valve for dip-tube, 1/2" hose barb (EPDM, Hastelloy C)2479003 Foot valve for dip-tube, 1/2" hose barb (FKM, Hastelloy C)NOTE: Colder Products Company distributes the above check valves and foot valves. These valves are not producedby Colder and Colder makes no claims or warranty regarding suitability for use in specific applications.Coupler Liquid Port Fittings | Material: Polypropylene2402600 1/2" female NPT x 3/8" OD compression2402700 1/2" female NPT x 1/2" OD compression2402800 1/2" female NPT x 5/8" OD compression2402900 1/2" female NPT x 3/8" ID hose barb2403000 1/2" female NPT x 1/2" ID hose barb2403100 1/2" female NPT x 3/4" ID hose barbVent Check ValveBackflow Check and Foot Valves(Prevents liquid from draining back into drumwhen pump is off)ACCESSORIESDQPUR Accessory FittingsDQPUR MC0404DQPUR MC0604DQPUR MC0804DQPUR FR1208DQPUR FI1216DQPUR TFMC1208DQPUR SE0808DQPURSE1212DQPURDCPM0812DQPURDCPM1216DQPURDCN0812DQPURDCN1216Male Connector, PVDF, 1/4" Flare x 1/4" NPTMale Connector, PVDF, 3/8" Flare x 1/4" NPTMale Connector, PVDF, 1/2" Flare x1/4" NPTFlare Reducer, PFA, 3/4" Female Flare x 1/2" Male FlareFlare Increaser, PFA, 3/4" Female Flare x 1" Male FlareFemale flare x male connector, PFA, 3/4" Female Flare x 1/2" Male NPTSweep Elbow, PFA, 1/2" Female Flare x 1/2" Male FlareSweep Elbow, PFA, 3/4" Female Flare x 3/4" Male FlareDouble Containment Panel Mount Fitting, PFA,1/2" process line x 3/4" secondary containment lineDouble Containment Panel Mount Fitting, PFA,3/4" process line x 1" secondary containment lineDouble Containment Adapter, PFA,1/2" process line x 3/4" secondary containment lineDouble Containment Adapter, PFA,3/4" process line x 1" secondary containment lineCoupler LiquidPort FittingsShippingPlugKeyinstallationTool| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.103
DrumQuik ® 3-Port UDA KitPolypropyleneThe 3-Port UDA features a 3/4" male NPT thread that mates with common containers,bung plugs and caps. The adaptor ports enable simultaneous chemical extraction,venting or application of blanket gas. In addition, the third port can be used torecirculate priming chemical to the container in metering pump applications.Optional system components including foot valves, air filters and vent check valves arealso available. For your convenience, Colder offers a variety of drum adaptor plugs tofacilitate easy drum connections. (See plugs and caps on page 103.)PART NO.DQUDA3PKITDQUDA3PKIT202DESCRIPTION3-port adaptor, EPDM seal, locking nut, 35.5" (905mm) dip-tube, 1/2" x 3/8" &1/2" x 1/4" reducer bushings and 1/4" & 3/8" NPT plugs3-port adaptor, FKM seal, locking nut, 35.5" (905mm) dip-tube, 1/2" x 3/8" &1/2" x 1/4" reducer bushings and 1/4" & 3/8" NPT plugsDRUMQUIK ADAPTORSUniversal 3-Port Drum Adaptor Kit(shown with HFC12 and NS4)DQUDA3P 3-port adaptor bulk packaged (1/2" female NPT liquid outlet port, 3/8" & 1/4"NPT vent/recirculation ports)DQUDA3PNUTLocking nut for the 3-port adaptor2717000 EPDM seal for the 3-port adaptor2717100 FKM seal for the 3-port adaptor2621100 Reducer bushing, black polypropylene, 1/2" male NPT x 3/8" female NPT2621200 Reducer bushing, black polypropylene, 1/2" male NPT x 1/4" female NPT2621300 Pipe plug, black polypropylene, 1/4" male NPT2621400 Pipe plug, black polypropylene, 3/8" male NPTUse with PLC, Non-Spill, EFC and ChemQuik Series couplings.NOTE: DrumQuik ® UDA 3-Port uses DrumQuik PRO dip-tubes and accessories.DrumQuik UDA KitPolypropyleneThe DrumQuik ® UDA Kit turns ChemQuik ® or general purpose (HFC or NSH) couplingsinto a dip-tube that can easily be threaded into the 3/4" female NPS port of commondrum closures. It provides a simple and inexpensive way to dispense chemicals inpumped systems. For your convenience, Colder offers a variety of drum adaptor plugsto facilitate easy drum connections. (See plugs and caps on page 103.)Press together to assembleDip-tubeBushingCoupling InsertCoupling BodyPART NO.DESCRIPTIONDQUDAKITPP35 Adaptor & dip-tube, 37" (889mm) long from o-ring surface (approx.), Viton ®FKM sealDQUDAKITPP55 Adaptor & dip-tube, 55" (1397mm) long, Viton FKM o-ringUse with HFC, NSH and ChemQuik Series couplings.DrumQuik UDA Foot ValvePART NO.DQMFVPP0708DESCRIPTIONFoot valve for use with DrumQuik UDA dip-tubes, fits 1/2" ODtubing, PTFE sealUniversal Drum Adaptor Kit(shown with NSH Series)104| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
BottleQuik ® UBA 2-Port KitPolypropyleneThe BottleQuik ® is intended for use on reagent bottles with SP400-38mm threads. It canbe used in either the upright position or inverted and has two 3/8" female NPT ports forliquid and vent ports.PART NO.DQUDACAP2PKITPPDESCRIPTION2-Port adaptor CAP for 38mm SP400 bottles & dip-tubes, 17.75" (451mm)long, Viton FKM o-ring. 3/8" female NPT liquid port, 3/8" female NPT ventport, 3/8" female NPT vent port.Use above kits with CQG, CQH and CQV Series couplings.DrumQuik ® Asian Drum AdaptorsPolypropyleneThe DrumQuik ® Asian drum adaptors allow ChemQuik ® or general purpose (HFC orNSH) couplings to be easily connected to the unique threads common in many drumclosures (with integral dip-tubes) manufactured in Asia, e.g., Kodama, Accelo, Stella,Dung Woo, etc. A 3/4" female NPT inner thread can accept any coupling or fittingwith a 3/4" male NPT termination.PART NO.DQADAPP0212TYPE ADESCRIPTIONAdaptor, Viton ® FKM seals, 3/4" female NPT inner port x 3/4" NPSmale thread to fit drum plug.DQADAPP0622 Adaptor, Viton FKM seals, 3/4" female NPT inner port x 1-3/8"TYPE Bmale buttress thread to fit drum plug.BottleQuik UBA 2-Port Bottle Adaptor Kit(shown with CQG and CQH)Type AFor use with closureplugs with a 3/4" NPScenter port.Type BFor use with closureplugs with a 1-3/8"buttress center port.DRUMQUIK ACCESSORIESDrumQuik Plugs and CapsFor your convenience, Colder offers several sizes of common bung plugs and caps thathave the internal 3/4" female NPS thread, into which the DrumQuik Universal DrumAdaptors/ChemQuik couplings are threaded.PART NO.DQMBUNGPP2BUT12DESCRIPTIONBung closure, polypropylene, EPDM o-ring, 2" buttress x 3/4" female NPS3/4" NPT inner port incorporates a face seal toassure a leak-free connection.DQMBUNGPP2NPS12DQMBUNGPP56X412DQMBUNGPP70X612DQMCAPPP70MMDQMCAPPP63MMBung closure, polypropylene, EPDM o-ring, 2" NPS x 3/4" female NPSBung closure, polypropylene, EPDM o-ring, BCS56x4 x 3/4" female NPSBung closure, polypropylene, EPDM o-ring, BCS70x6, 3/4" female NPSCap closure, polypropylene, EPDM o-ring, 70mm x 3/4" female NPSCap closure, polypropylene, EPDM o-ring, 63mm, 3/4" female NPSAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.NOTE: The DQ UDA kits are designed to work with Colder couplings that have 3/4" NPT male terminations. The DQ UDA 3-Portkits are designed to work with a 1/2" NPT male on the liquid port and a 1/4" NPT male on the vent port. A 1/2" male NPT to 1/4"female NPT reducer bushing may be required to accommodate smaller NS4, PLC and PMC Series couplings. BottleQuik featurestwo 3/8" female NPT ports. NOTE: DrumQuik Adaptors are intended for end-use applications not requiring compliance with UN/DOT standards for use in transportation of hazardous materials.DQ UDA kits can be used with a widerange of closures.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.105
PatentedActual size<strong>Specifications</strong>Pressure:20" Hg vacuum to 15 psi, 1 bar(body only)Temperature:32°F to 160°F (0°C to 71°C)Materials:Main body components and valves:PolypropyleneSprings:Body: 316 stainless steelCap: 302 stainless steelUDC caps: Acetal, polypropyleneO-rings (food grade):UDC: EPDM, silicone, Buna-NiUDC: EPDM, siliconeCIP adapter: AcetalColor: Light gray with dark gray latchThe patented 3/8" flow Universal DispensingCoupler (UDC) provides a universal connection to a 38mmthreaded or snap-in fitment neck. Make instant connectionsto bulk packaging systems including bag-in-box (BIB),flexible and rigid packaging styles. Automatic flush facevalves minimize costly or dangerous spillage. An ergonomicdesign and a large, shrouded thumb latch pad produce acoupling that is easy to grip and simple to operate.Closure Size: SP-400 thread/38mm snap-inTubing Sizes:3/8" to 3/4" ID, 9.5mm to 19.0mm IDThe UDC Series is also available with optional RFID (Radio FrequencyIdentification) capability.FeaturesUniversal 38mm capFlush face/non-spill valvesIntegral terminationsShrouded thumb latchRFID technology(iUDC only)BenefitsFits industry standard fitment necksMinimize spillageFewer leak points, shorter assemblies,faster installationsProtects against accidental disconnectsHelps maintain warranty, integrity,brand protectionAProduct DimensionsBA = Height/DiameterB = Total LengthD = Elbow Radial LengthBDAUDC SERIESCoupling BodiesTERMINATIONIN-LINEHOSE BARBTUBING SIZE SILICONE O-RING BUNA-N O-RING EPDM O-RING A B3/8" ID 99000 98400 98500 1.73 3.061/2" ID 95600 97600 95300 1.73 3.065/8" ID 99100 97900 98100 1.73 3.203/4" ID 99200 98600 98700 1.73 3.21TERMINATIONELBOWHOSE BARBTUBING SIZE SILICONE O-RING BUNA-N O-RING EPDM O-RING A B D3/8" ID 99300 97800 99400 1.73 3.25 .931/2" ID 95400 97700 95100 1.73 3.25 .93All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.106
TERMINATIONTHREAD-ON,38MM, VALVEDCapsDESCRIPTION SILICONE O-RING BUNA-N O-RING EPDM O-RING A BWithout thread seal 95800 96400 97400 1.70 1.47With thread seal 95801 96401 97401 1.70 1.47TERMINATIONSNAP-IN 38MMVALVEDDESCRIPTION SILICONE O-RING EPDM O-RING A B9461300 9500000 1.15 1.77THREAD-ON,38MM, VALVEDTERMINATIONIN-LINEWith thread seal 9462000 1.70 1.48NOTE: Snap-in closure designed to fit Scholle 900 bag necks.Clean-in-Place (CIP) AdapterDESCRIPTION PART NO. A B1/2" HB (no o-ring) 96000 1.15 1.56All measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters. Couplings are pictured with valves unless otherwise noted.The IdentiQuik ® Series ofsmart couplings are RFID enabled couplingsused on equipment and in processes. RFIDis an identification method that relies onremotely writing and reading data. Smartcoupling applications include: inventorylevel meters, surgical tool identification,product protection and many more.RFID <strong>Specifications</strong>RF CommunicationRange: Approximately 1"Operating voltage:8-24 V standardPower Consumption:1.2W MaximumCommunications:ASCII RS-232 (DB-9),USBRFID Tag:13.56 MHzISO 15693 - 112 bytesprogrammableTemperature:32°F to 150°F(0 C to 66 C)Coupling ReadersCapsSMART COUPLINGS WITH RFIDIdentiQuik UDC SeriesIdentify misconnections: eliminate out-of-sequence connections ormisconnections due to operator errorProtect your brand: prevent out-of-date, incorrect or misapplied products frombeing usedProlong equipment life: prevent the accidental or unintentional use of harmfulmediaSave time: automatic documentation of package and media lot numbers, datecodes and moreProduct Dimensions(See drawing on page 106)TERMINATION TUBING SIZE METRIC EQ. SHUTOFF A BIN-LINE 1/4" ID 6.4mm ID iUDCDR1700400 2.00 3.49HOSE BARB 3/8" ID 9.5mm ID iUDCDR1700600 2.00 3.491/2" ID 12.7mm ID iUDCDR1700800 2.00 3.495/8" ID 15.9mm ID iUDCDR1701000 2.00 3.493/4" ID 19mm ID iUDCDR1701200 2.00 3.49PANEL MOUNT 1/4" ID 6.4mm ID iUDCDR1600400 VisitHOSE BARB 3/8" ID 9.5mm ID iUDCDR1600600 www.colder.com1/2" ID 12.7mm ID iUDCDR1600800TERMINATION DESCRIPTION METRIC EQ. SHUTOFF A BTHREAD-ON, Without thread seal 38mm iUDCDTCN3803 1.70 1.4738MM, VALVED With thread seal 38mm iUDCDTCS3803 1.70 1.47TERMINATION DESCRIPTION METRIC EQ. SHUTOFF A BTHREAD-ON, Without thread seal 38mm iUDCDTCN3800 1.70 1.4838MM, VALVED With thread seal 38mm iUDCDTCS3800 1.70 1.48UDC SERIESPatentedTERMINATION METRIC EQ. SHUTOFF A BSNAP-IN 38mm iUDCDTSN0000 1.62 1.7638MM, VALVEDAll measurements are in inches (millimeters) unless otherwise noted. Tubing must meet stated inside and outside diameters.Materials are listed on page 106. Customized parts (materials, voltage, termination, cable length, etc.) available. Call for more information.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.107
PUNCTURE SEALPUNCTURE SEAL<strong>Specifications</strong>Pressure: 120 psi, 8.3 bar (coupling body)Temperature:32°F to 160°F (0°C to 71°C)Materials:Main components and valves: Polypropylene38mm closure: Polyethylene (LDPE)Thumb latch: Stainless steelValve spring: 316 stainless steelExternal spring and pin: Stainless steelO-rings: EPDMClosure Size: SP-400 38mmTubing Sizes:1/4" and 3/8" ID, 6.4mm and 9.5mm IDPatentedActual sizeThe 1/4" flow Puncture Seal dispensing system provides cleanand safe liquid dispensing from bag-in-box (BIB) or other types of flexiblepackaging. The system consists of a Puncture Seal closure cap and a speciallydesigned quick disconnect coupling body. The closure makes a positive threador snap-in seal with a 38mm fitment neck. The Puncture Seal coupling bodyautomatically breaks the membrane seal on the closure cap when connected. Toswitch to a new container, simply depress the Colder thumb latch to disconnectthe system and then connect the Puncture Seal coupling body to a freshcontainer.FeaturesPuncture Seal couplingPolypropylene andpolyethylene materialsPuncture Seal membraneColder thumb latchBenefitsEasily breaks the Puncture SealmembraneGreater chemical resistanceEliminates shipping caps and o-ringsOne-hand connection and disconnection108
Coupling BodyTERMINATIONIN-LINEHOSE BARBTERMINATIONTHREAD-ON,38MMTUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF LENGTH1/4" ID 6.4mm ID PS1700412 PSD1700412 1.953/8" ID 9.5 mm ID PS1700612 PSD1700612 1.95PART NO. LENGTH HEIGHTPSC38mm 1.7 1.12ClosurePUNCTURE SEALTERMINATIONSNAP-IN38MMPART NO. LENGTH HEIGHT496200 1.88 1.62NOTE: Part #496200 is designed to mate with the Hedwin Cubitainer ® snap joint.Puncture SealmembraneTwo moldedseal ringsLockinggrooveDID YOU KNOW ...Colder’s Puncture Seal closures can be used to dispensevirtually any liquid from flexible packages? The PunctureSeal makes transporting and dispensing cleaningconcentrates, dry cleaning chemicals and soaps cleanerand safer. Printing inks, photo developers and dyingagents can also be dispensed quickly and easily, withoutmessy drips or spills. The Puncture Seal can also be usedwith beverage and condiment dispensing systems, justlook for the NSF-listed part numbers.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.109
FitQuik ConnectorsFitQuik Connectors from Colder ProductsCompany are high quality fittings for leak-freetubing connections. These precision moldedfittings are designed to eliminate tubingleak points in applications such as medicaldevices, analytical instrumentation or air-drivenequipment.Cost-competitive FitQuik Connectors are offeredin many standard configurations or in customdesigns to meet unique customer specifications.Feature Single, sharp hose barbs Parting line-free hose barbs Instrumentation grade materialsBenefit Won’t disconnect from tubing Eliminates potential leak point Reduced breakage in demanding applicationsMaterials available: Black and white nylon, polypropylene110 Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Designed to FitQuality FitQuik Connectors are instrumentationgrade fittings that ensure a secure fit in even the mostdemanding applications. These fittings feature precisehose barbs and thread forms to ensure the right fit,every time.Precision molded hose barbdesigned for maximum holdingpower. No tube clamps required.CPC® logo lets youknow you have a genuineColder FitQuik Connector.Parting line-free hose barbensures a leak-free connection.Precision molded threadsfor a secure connection into avariety of threaded ports.111111
TUBE TO TUBETUBE TO TUBE FITTINGS - STRAIGHTPART NO.DESCRIPTIONHS2Polypropylene Straight Fitting with 1/16" Hose BarbsHS230White Nylon Straight Fitting with 1/16" Hose BarbsHS231Black Nylon Straight Fitting with 1/16" Hose BarbsHS291Purple Tint Polycarbonate Straight Fitting with 1/16" Hose BarbsHS3Polypropylene Straight Fitting with 3/32" Hose BarbsHS330White Nylon Straight Fitting with 3/32" Hose BarbsHS331Black Nylon Straight Fitting with 3/32" Hose BarbsHS391Purple Tint Polycarbonate Straight Fitting with 3/32" Hose BarbsHS4Polypropylene Straight Fitting with 1/8" Hose BarbsHS430White Nylon Straight Fitting with 1/8" Hose BarbsHS431Black Nylon Straight Fitting with 1/8" Hose BarbsHS491Purple Tint Polycarbonate Straight Fitting with 3/32" Hose BarbsHS5Polypropylene Straight Fitting with 5/32" Hose BarbsHS530White Nylon Straight Fitting with 5/32" Hose BarbsHS531Black Nylon Straight Fitting with 5/32" Hose BarbsHS591Purple Tint Polycarbonate Straight Fitting with 3/32" Hose BarbsHS6Polypropylene Straight Fitting with 3/16" Hose BarbsHS630White Nylon Straight Fitting with 3/16" Hose BarbsHS631Black Nylon Straight Fitting with 3/16" Hose BarbsHS691Purple Tint Polycarbonate Straight Fitting with 3/32" Hose BarbsHS8Polypropylene Straight Fitting with 1/4" Hose BarbsHS830White Nylon Straight Fitting with 1/4" Hose BarbsHS831Black Nylon Straight Fitting with 1/4" Hose BarbsHS891Purple Tint Polycarbonate Straight Fitting with 3/32" Hose BarbsHS12Polypropylene Straight Fitting with 3/8" Hose BarbsHS1230White Nylon Straight Fitting with 3/8" Hose BarbsHS1231Black Nylon Straight Fitting with 3/8" Hose BarbsTUBE TO TUBE FITTINGS - ELBOWPART NO.HE2HE230HE231HE291DESCRIPTIONPolypropylene Elbow Fitting with 1/16" Hose BarbsWhite Nylon Elbow Fitting with 1/16" Hose BarbsBlack Nylon Elbow Fitting with 1/16" Hose BarbsPurple Tint Polycarbonate Elbow Fitting with 1/16" Hose BarbsHE3Polypropylene Elbow Fitting with 3/32" Hose BarbsHE330White Nylon Elbow Fitting with 3/32" Hose BarbsHE331Black Nylon Elbow Fitting with 3/32" Hose BarbsHE391Purple Tint Polycarbonate Elbow Fitting with 3/32" Hose BarbsNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com112112Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
TUBE TO TUBEPART NO.HE4HE430HE431HE491HE5HE530HE531HE591HE6HE630HE631HE691HE8HE830HE831HE891HE12HE1230HE1231DESCRIPTIONPolypropylene Elbow Fitting with 1/8" Hose BarbsWhite Nylon Elbow Fitting with 1/8" Hose BarbsBlack Nylon Elbow Fitting with 1/8" Hose BarbsPurple Tint Polycarbonate Elbow Fitting with 1/8" Hose BarbsPolypropylene Elbow Fitting with 5/32" Hose BarbsWhite Nylon Elbow Fitting with 5/32" Hose BarbsBlack Nylon Elbow Fitting with 5/32" Hose BarbsPurple Tint Polycarbonate Elbow Fitting with 5/32" Hose BarbsPolypropylene Elbow Fitting with 3/16" Hose BarbsWhite Nylon Elbow Fitting with 3/16" Hose BarbsBlack Nylon Elbow Fitting with 3/16" Hose BarbsPurple Tint Polycarbonate Elbow Fitting with 3/16" Hose BarbsPolypropylene Elbow Fitting with 1/4" Hose BarbsWhite Nylon Elbow Fitting with 1/4" Hose BarbsBlack Nylon Elbow Fitting with 1/4" Hose BarbsPurple Tint Polycarbonate Elbow Fitting with 1/4" Hose BarbsPolypropylene Elbow Fitting with 3/8" Hose BarbsWhite Nylon Elbow Fitting with 3/8" Hose BarbsBlack Nylon Elbow Fitting with 3/8" Hose BarbsTUBE TO TUBE FITTINGS - ELBOWPART NO.HT2HT230HT231HT291HT3HT330HT331HT391HT4HT430HT431HT491HT5HT530HT531HT591DESCRIPTIONPolypropylene Tee Fitting with 1/16" Hose BarbsWhite Nylon Tee Fitting with 1/16" Hose BarbsBlack Nylon Tee Fitting with 1/16" Hose BarbsPurple Tint Polycarbonate Tee Fitting with 1/16" Hose BarbsPolypropylene Tee Fitting with 3/32" Hose BarbsWhite Nylon Tee Fitting with 3/32" Hose BarbsBlack Nylon Tee Fitting with 3/32" Hose BarbsPurple Tint Polycarbonate Tee Fitting with 3/32" Hose BarbsPolypropylene Tee Fitting with 1/8" Hose BarbsWhite Nylon Tee Fitting with 1/8" Hose BarbsBlack Nylon Tee Fitting with 1/8" Hose BarbsPurple Tint Polycarbonate Tee Fitting with 1/8" Hose BarbsPolypropylene Tee Fitting with 5/32" Hose BarbsWhite Nylon Tee Fitting with 5/32" Hose BarbsBlack Nylon Tee Fitting with 5/32" Hose BarbsPurple Tint Polycarbonate Tee Fitting with 5/32" Hose BarbsTUBE TO TUBE FITTINGS - TEENote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com113113
TUBE TO TUBETUBE TO TUBE FITTINGS - TEEPART NO.DESCRIPTIONHT6Polypropylene Tee Fitting with 3/16" Hose BarbsHT630White Nylon Tee Fitting with 3/16" Hose BarbsHT631Black Nylon Tee Fitting with 3/16" Hose BarbsHT691Purple Tint Polycarbonate Tee Fitting with 3/16" Hose BarbsHT8Polypropylene Tee Fitting with 1/4" Hose BarbsHT830White Nylon Tee Fitting with 1/4" Hose BarbsHT831Black Nylon Tee Fitting with 1/4" Hose BarbsHT891Purple Tint Polycarbonate Tee Fitting with 1/4" Hose BarbsHT12Polypropylene Tee Fitting with 3/8" Hose BarbsHT1230White Nylon Tee Fitting with 3/8" Hose BarbsHT1231Black Nylon Tee Fitting with 3/8" Hose BarbsTUBE TO TUBE FITTINGS - YPART NO.DESCRIPTIONHY2Polypropylene Y Fitting with 1/16" Hose BarbsHY230White Nylon Y Fitting with 1/16" Hose BarbsHY231Black Nylon Y Fitting with 1/16" Hose BarbsHY291Purple Tint Polycarbonate Y Fitting with 1/16" Hose BarbsHY3Polypropylene Y Fitting with 3/32" Hose BarbsHY330White Nylon Y Fitting with 3/32" Hose BarbsHY331Black Nylon Y Fitting with 3/32" Hose BarbsHY391Purple Tint Polycarbonate Y Fitting with 3/32" Hose BarbsHY4Polypropylene Y Fitting with 1/8" Hose BarbsHY430White Nylon Y Fitting with 1/8" Hose BarbsHY431Black Nylon Y Fitting with 1/8" Hose BarbsHY491Purple Tint Polycarbonate Y Fitting with 1/8" Hose BarbsHY5Polypropylene Y Fitting with 5/32" Hose BarbsHY530White Nylon Y Fitting with 5/32" Hose BarbsHY531Black Nylon Y Fitting with 5/32" Hose BarbsHY591Purple Tint Polycarbonate Y Fitting with 5/32" Hose BarbsHY6Polypropylene Y Fitting with 3/16" Hose BarbsHY630White Nylon Y Fitting with 3/16" Hose BarbsHY631Black Nylon Y Fitting with 3/16" Hose BarbsHY691Purple Tint Polycarbonate Y Fitting with 13/16" Hose BarbsHY8Polypropylene Y Fitting with 1/4" Hose BarbsHY830White Nylon Y Fitting with 1/4" Hose BarbsHY831Black Nylon Y Fitting with 1/4" Hose BarbsHY891Purple Tint Polycarbonate Y Fitting with 1/4" Hose BarbsNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com114114Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
TUBE TO TUBEPART NO.DESCRIPTIONHY12Polypropylene Y Fitting with 3/8" Hose BarbsHY1230White Nylon Y Fitting with 3/8" Hose BarbsHY1231Black Nylon Y Fitting with 3/8" Hose BarbsTUBE TO TUBE FITTINGS - YPART NO.HSR32HSR3230HSR3231HSR3291HSR42HSR4230HSR4231HSR4291HSR43HSR4330HSR4331HSR4391HSR52HSR5230HSR5231HSR5291HSR53HSR5330HSR5331HSR5391HSR54HSR5430HSR5431HSR5491HSR62HSR6230HSR6231HSR6291HSR63HSR6330HSR6331HSR6391TUBE TO TUBE FITTINGS - STRAIGHT REDUCERDESCRIPTIONPolypropylene Reducer Fitting, 3/32" to 1/16" Hose BarbWhite Nylon Reducer Fitting, 3/32" to 1/16" Hose BarbBlack Nylon Reducer Fitting, 3/32" to 1/16" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 3/32" to 1/16" Hose BarbPolypropylene Reducer Fitting, 1/8" to 1/16" Hose BarbWhite Nylon Reducer Fitting, 1/8" to 1/16" Hose BarbBlack Nylon Reducer Fitting, 1/8" to 1/16" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 1/8" to 1/16" Hose BarbPolypropylene Reducer Fitting, 1/8" to 3/32" Hose BarbWhite Nylon Reducer Fitting, 1/8" to 3/32" Hose BarbBlack Nylon Reducer Fitting, 1/8" to 3/32" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 1/8" to 3/32" Hose BarbPolypropylene Reducer Fitting, 5/32" to 1/16" Hose BarbWhite Nylon Reducer Fitting, 5/32" to 1/16" Hose BarbBlack Nylon Reducer Fitting, 5/32" to 1/16" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 5/32" to 1/16" Hose BarbPolypropylene Reducer Fitting, 5/32" to 3/32" Hose BarbWhite Nylon Reducer Fitting, 5/32" to 3/32" Hose BarbBlack Nylon Reducer Fitting, 5/32" to 3/32" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 5/32" to 3/32" Hose BarbPolypropylene Reducer Fitting, 5/32" to 1/8" Hose BarbWhite Nylon Reducer Fitting, 5/32" to 1/8" Hose BarbBlack Nylon Reducer Fitting, 5/32" to 1/8" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 5/32" to 1/8" Hose BarbPolypropylene Reducer Fitting, 3/16" to 1/16" Hose BarbWhite Nylon Reducer Fitting, 3/16" to 1/16" Hose BarbBlack Nylon Reducer Fitting, 3/16" to 1/16" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 3/16" to 1/16" Hose BarbPolypropylene Reducer Fitting 3/16" to 3/32" Hose BarbWhite Nylon Reducer Fitting 3/16" to 3/32" Hose BarbBlack Nylon Reducer Fitting 3/16" to 3/32" Hose BarbPurple Tint Polycarbonate Reducer Fitting, 3/16" to 3/32" Hose BarbNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com115115
TUBE TO TUBETUBE TO TUBE FITTINGS - STRAIGHT REDUCERPART NO.DESCRIPTIONHSR64Polypropylene Reducer Fitting, 3/16" to 1/8" Hose BarbHSR6430White Nylon Reducer Fitting, 3/16" to 1/8" Hose BarbHSR6431Black Nylon Reducer Fitting, 3/16" to 1/8" Hose BarbHSR6491Purple Tint Polycarbonate Reducer Fittings, 3/16" to 1/8" Hose BarbHSR65Polypropylene Reducer Fitting, 3/16" to 5/32" Hose BarbHSR6530White Nylon Reducer Fitting, 3/16" to 5/32" Hose BarbHSR6531Black Nylon Reducer Fitting, 3/16" to 5/32" Hose BarbHSR6591Purple Tint Polycarbonate Reducer Fittings, 3/16" to 5/32" Hose BarbHSR84Polypropylene Reducer Fitting, 1/4" to 1/8" Hose BarbHSR8430White Nylon Reducer Fitting, 1/4" to 1/8" Hose BarbHSR8431Black Nylon Reducer Fitting, 1/4" to 1/8" Hose BarbHSR8491Purple Tint Polycarbonate Reducer Fittings, 1/4" to 1/8" Hose BarbHSR85Polypropylene Reducer Fitting, 1/4" to 5/32" Hose BarbHSR8530White Nylon Reducer Fitting, 1/4" to 5/32" Hose BarbHSR8531Black Nylon Reducer Fitting, 1/4" to 5/32" Hose BarbHSR8591Purple Tint Polycarbonate Reducer Fittings, 1/4" to 5/32" Hose BarbHSR86Polypropylene Reducer Fitting, 1/4" to 3/16" Hose BarbHSR8630White Nylon Reducer Fitting, 1/4" to 3/16" Hose BarbHSR8631Black Nylon Reducer Fitting, 1/4" to 3/16" Hose BarbHSR8691Purple Tint Polycarbonate Reducer Fittings, 1/4" to 3/16" Hose BarbHSR128Polypropylene Reducer Fitting, 3/8" to 1/4" Hose BarbHSR12830White Nylon Reducer Fitting, 3/8" to 1/4" Hose BarbHSR12831Black Nylon Reducer Fitting, 3/8" to 1/4" Hose BarbContact us for information on our new lineof PVDF fittings!Note: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com116116Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
THREAD TO TUBEPART NO.KS2KS230KS231DESCRIPTIONPolypropylene Straight Fitting, 1/4-28 UNF to 1/16" Hose BarbWhite Nylon Straight Fitting, 1/4-28 UNF to 1/16" Hose BarbBlack Nylon Straight Fitting, 1/4-28 UNF to 1/16" Hose BarbFor FitQuik Connectors sterilization informationplease contact info@colder.comTHREAD TO TUBE FITTINGS - STRAIGHTKS3KS330KS331Polypropylene Straight Fitting, 1/4-28 UNF to 3/32" Hose BarbWhite Nylon Straight Fitting, 1/4-28 UNF to 3/32" Hose BarbBlack Nylon Straight Fitting, 1/4-28 UNF to 3/32" Hose BarbKS4KS430KS431Polypropylene Straight Fitting, 1/4-28 UNF to 1/8" Hose BarbWhite Nylon Straight Fitting, 1/4-28 UNF to 1/8" Hose BarbBlack Nylon Straight Fitting, 1/4-28 UNF to 1/8" Hose BarbKS5KS530KS531Polypropylene Straight Fitting, 1/4-28 UNF to 5/32" Hose BarbWhite Nylon Straight Fitting, 1/4-28 UNF to 5/32" Hose BarbBlack Nylon Straight Fitting, 1/4-28 UNF to 5/32" Hose BarbMS2MS230MS231Polypropylene Straight Fitting, Tapered 10-32 to 1/16" Hose BarbWhite Nylon Straight Fitting, Tapered 10-32 to 1/16" Hose BarbBlack Nylon Straight Fitting, Tapered 10-32 to 1/16" Hose BarbMS3MS330MS331Polypropylene Straight Fitting, Tapered 10-32 to 3/32" Hose BarbWhite Nylon Straight Fitting, Tapered 10-32 to 3/32" Hose BarbBlack Nylon Straight Fitting, Tapered 10-32 to 3/32" Hose BarbMS4MS430MS431Polypropylene Straight Fitting, Tapered 10-32 to 1/8" Hose BarbWhite Nylon Straight Fitting, Tapered 10-32 to 1/8" Hose BarbBlack Nylon Straight Fitting, Tapered 10-32 to 1/8" Hose BarbMS5MS530MS531Polypropylene Straight Fitting, Tapered 10-32 to 5/32" Hose BarbWhite Nylon Straight Fitting, Tapered 10-32 to 5/32" Hose BarbBlack Nylon Straight Fitting, Tapered 10-32 to 5/32" Hose BarbN2S2N2S230N2S231Polypropylene Straight Fitting, 1/16" NPT to 1/16" Hose BarbWhite Nylon Straight Fitting, 1/16" NPT to 1/16" Hose BarbBlack Nylon Straight Fitting, 1/16" NPT to 1/16" Hose BarbN2S3N2S330N2S331Polypropylene Straight Fitting, 1/16" NPT to 3/32" Hose BarbWhite Nylon Straight Fitting, 1/16" NPT to 3/32" Hose BarbBlack Nylon Straight Fitting, 1/16" NPT to 3/32" Hose BarbNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com117117
THREAD TO TUBETHREAD TO TUBE FITTINGS - STRAIGHTPART NO.N2S4N2S430N2S431DESCRIPTIONPolypropylene Straight Fitting, 1/16" NPT to 1/8" Hose BarbWhite Nylon Straight Fitting, 1/16" NPT to 1/8" Hose BarbBlack Nylon Straight Fitting, 1/16" NPT to 1/8" Hose BarbN2S5N2S530N2S531Polypropylene Straight Fitting, 1/16" NPT to 5/32" Hose BarbWhite Nylon Straight Fitting, 1/16" NPT to 5/32" Hose BarbBlack Nylon Straight Fitting, 1/16" NPT to 5/32" Hose BarbN4S2N4S230N4S231Polypropylene Straight Fitting, 1/8" NPT to 1/16" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 1/16" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 1/16" Hose BarbN4S3N4S330N4S331Polypropylene Straight Fitting, 1/8" NPT to 3/32" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 3/32" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 3/32" Hose BarbN4S4N4S430N4S431Polypropylene Straight Fitting, 1/8" NPT to 1/8" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 1/8" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 1/8" Hose BarbN4S5N4S530N4S531Polypropylene Straight Fitting, 1/8" NPT to 5/32" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 5/32" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 5/32" Hose BarbN4S6N4S630N4S631Polypropylene Straight Fitting, 1/8" NPT to 3/16" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 3/16" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 3/16" Hose BarbN4S8N4S830N4S831Polypropylene Straight Fitting, 1/8" NPT to 1/4" Hose BarbWhite Nylon Straight Fitting, 1/8" NPT to 1/4" Hose BarbBlack Nylon Straight Fitting, 1/8" NPT to 1/4" Hose BarbN8S4N8S430N8S431Polypropylene Straight Fitting, 1/4" NPT to 1/8" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 1/8" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 1/8" Hose BarbN8S5N8S530N8S531Polypropylene Straight Fitting, 1/4" NPT to 5/32" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 5/32" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 5/32" Hose BarbNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com118118Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
THREAD TO TUBEPART NO.N8S6N8S630N8S631THREAD TO TUBE FITTINGS - STRAIGHTDESCRIPTIONPolypropylene Straight Fitting, 1/4" NPT to 3/16" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 3/16" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 3/16" Hose BarbN8S8N8S830N8S831Polypropylene Straight Fitting, 1/4" NPT to 1/4" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 1/4" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 1/4" Hose BarbN8S10N8S1030N8S1031Polypropylene Straight Fitting, 1/4" NPT to 5/16" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 5/16" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 5/16" Hose BarbN8S12N8S1230N8S1231Polypropylene Straight Fitting, 1/4" NPT to 3/8" Hose BarbWhite Nylon Straight Fitting, 1/4" NPT to 3/8" Hose BarbBlack Nylon Straight Fitting, 1/4" NPT to 3/8" Hose BarbPART NO.ME2ME230ME231THREAD TO TUBE FITTINGS - ELBOWDESCRIPTIONPolypropylene Elbow Fitting, Tapered 10-32 to 1/16" Hose BarbWhite Nylon Elbow Fitting, Tapered 10-32 to 1/16" Hose BarbBlack Nylon Elbow Fitting, Tapered 10-32 to 1/16" Hose BarbME3ME330ME331Polypropylene Elbow Fitting, Tapered 10-32 to 3/32" Hose BarbWhite Nylon Elbow Fitting, Tapered 10-32 to 3/32" Hose BarbBlack Nylon Elbow Fitting, Tapered 10-32 to 3/32" Hose BarbME4ME430ME431Polypropylene Elbow Fitting, Tapered 10-32 to 1/8" Hose BarbWhite Nylon Elbow Fitting, Tapered 10-32 to 1/8" Hose BarbBlack Nylon Elbow Fitting, Tapered 10-32 to 1/8" Hose BarbME5ME530ME531Polypropylene Elbow Fitting, Tapered 10-32 to 5/32" Hose BarbWhite Nylon Elbow Fitting, Tapered 10-32 to 5/32" Hose BarbBlack Nylon Elbow Fitting, Tapered 10-32 to 5/32" Hose BarbThe unique shrouded hose barb on our 1/16" fittings providesadditional stability to prevent breakage in applications where smalltubing connections may be pulled or twisted during use.Note: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com119119
THREAD TO TUBETHREAD TO TUBE FITTINGS - ELBOWPART NO.N4E4N4E430N4E431Buy Online! FitQuik Connectors are available for fastdelivery from colder.com or visit colder.com to findyour local distributor.DESCRIPTIONPolypropylene Elbow Fitting, 1/8" NPT to 1/8" Hose BarbWhite Nylon Elbow Fitting, 1/8" NPT to 1/8" Hose BarbBlack Nylon Elbow Fitting, 1/8" NPT to 1/8" Hose BarbN4E6N4E630N4E631Polypropylene Elbow Fitting, 1/8" NPT to 3/16" Hose BarbWhite Nylon Elbow Fitting, 1/8" NPT to 3/16" Hose BarbBlack Nylon Elbow Fitting, 1/8" NPT to 3/16" Hose BarbN4E8N4E830N4E831Polypropylene Elbow Fitting, 1/8" NPT to 1/4" Hose BarbWhite Nylon Elbow Fitting, 1/8" NPT to 1/4" Hose BarbBlack Nylon Elbow Fitting, 1/8" NPT to 1/4" Hose BarbN8E8N8E830N8E831Polypropylene Elbow Fitting, 1/4" NPT to 1/4" Hose BarbWhite Nylon Elbow Fitting, 1/4" NPT to 1/4" Hose BarbBlack Nylon Elbow Fitting, 1/4" NPT to 1/4" Hose BarbN8E12N8E1230N8E1231Polypropylene Elbow Fitting, 1/4" NPT to 3/8" Hose BarbWhite Nylon Elbow Fitting, 1/4" NPT to 3/8" Hose BarbBlack Nylon Elbow Fitting, 1/4" NPT to 3/8" Hose BarbTHREAD TO TUBE FITTINGS - TEEPART NO.DESCRIPTIONMT2Polypropylene Tee Fitting, Tapered 10-32 to 1/16" Hose BarbsMT230White Nylon Tee Fitting, Tapered 10-32 to 1/16" Hose BarbsMT231Black Nylon Tee Fitting, Tapered 10-32 to 1/16" Hose BarbsMT3MT330MT331Polypropylene Tee Fitting, Tapered 10-32 to 3/32" Hose BarbsWhite Nylon Tee Fitting, Tapered 10-32 to 3/32" Hose BarbsBlack Nylon Tee Fitting, Tapered 10-32 to 3/32" Hose BarbsMT4MT430MT431Polypropylene Tee Fitting, Tapered 10-32 to 1/8" Hose BarbsWhite Nylon Tee Fitting, Tapered 10-32 to 1/8" Hose BarbsBlack Nylon Tee Fitting, Tapered 10-32 to 1/8" Hose BarbsMT5MT530MT531Polypropylene Tee Fitting, Tapered 10-32 to 5/32" Hose BarbsWhite Nylon Tee Fitting, Tapered 10-32 to 5/32" Hose BarbsBlack Nylon Tee Fitting, Tapered 10-32 to 5/32" Hose BarbsNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com120120Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
PLUGS & THREAD TO THREADPART NO.DESCRIPTIONMP Polypropylene Threaded Plug, Tapered 10-32MP30 White Nylon Threaded Plug, Tapered 10-32MP31 Black Nylon Threaded Plug, Tapered 10-32N2PN2P30N2P31N4PN4P30N4P31N8PN8P30N8P31Polypropylene Threaded Plug, 1/16" NPTWhite Nylon Threaded Plug, 1/16" NPTBlack Nylon Threaded Plug, 1/16" NPTPolypropylene Threaded Plug, 1/8" NPTWhite Nylon Threaded Plug, 1/8" NPTBlack Nylon Threaded Plug, 1/8" NPTPolypropylene Threaded Plug, 1/4" NPTWhite Nylon Threaded Plug, 1/4" NPTBlack Nylon Threaded Plug, 1/4" NPTTHREADED PLUGSPART NO.N32N3230N3231DESCRIPTIONPolypropylene Straight Fitting, Tapered 10-32 ThreadsWhite Nylon Straight Fitting, Tapered 10-32 ThreadsBlack Nylon Straight Fitting, Tapered 10-32 ThreadsTHREAD TO THREAD -STRAIGHTBLOOD PRESSUREBLOOD PRESSURE FITTINGS - MALE BAYONETPART NO.BC330BC331BC430BC431DESCRIPTIONWhite Nylon Male Bayonet Fitting to 3/32" Hose BarbBlack Nylon Male Bayonet Fitting to 3/32" Hose BarbWhite Nylon Male Bayonet Fitting to 1/8" Hose BarbBlack Nylon Male Bayonet Fitting to 1/8" Hose BarbBC530BC531BC630BC631PART NO.GS320GS420GS520GS620White Nylon Male Bayonet Fitting to 5/32" Hose BarbBlack Nylon Male Bayonet Fitting to 5/32" Hose BarbWhite Nylon Male Bayonet Fitting to 3/16" Hose BarbBlack Nylon Male Bayonet Fitting to 3/16" Hose BarbBLOOD PRESSURE FITTINGS - SCREW-TYPEDESCRIPTIONWhite Acetal Screw-type Fitting, 5/16" UNF to 3/32" Hose BarbWhite Acetal Screw-type Fitting, 5/16" UNF to 1/8" Hose BarbWhite Acetal Screw-type Fitting, 5/16" UNF to 5/32" Hose BarbWhite Acetal Screw-type Fitting, 5/16" UNF to 3/16" Hose BarbNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com121121
LUERSMALE LUERSPART NO.LM21LM2130LM2131LM2191LM31LM3130LM3131LM3191LM41LM4130LM4131LM4191LM51LM5130LM5131LM5191LM61LM6130LM6131LM6191Male luers feature an integrallocking ring!DESCRIPTIONPolypropylene Male Luer to 1/16" Hose BarbWhite Nylon Male Luer to 1/16" Hose BarbBlack Nylon Male Luer to 1/16" Hose BarbPurple Tint Polycarbonate Male Luer to 1/16" Hose BarbPolypropylene Male Luer to 3/32" Hose BarbWhite Nylon Male Luer to 3/32" Hose BarbBlack Nylon Male Luer to 3/32" Hose BarbPurple Tint Polycarbonate Male Luer to 3/32" Hose BarbPolypropylene Male Luer to 1/8" Hose BarbWhite Nylon Male Luer to 1/8" Hose BarbBlack Nylon Male Luer to 1/8" Hose BarbPurple Tint Polycarbonate Male Luer to 1/8" Hose BarbPolypropylene Male Luer to 5/32" Hose BarbWhite Nylon Male Luer to 5/32" Hose BarbBlack Nylon Male Luer to 5/32" Hose BarbPurple Tint Polycarbonate Male Luer to 5/32" Hose BarbPolypropylene Male Luer to 3/16" Hose BarbWhite Nylon Male Luer to 3/16" Hose BarbBlack Nylon Male Luer to 3/16" Hose BarbPurple Tint Polycarbonate Male Luer to 3/16" Hose BarbFEMALE LUERSPART NO.LF21LF2130LF2131LF2191LF31LF3130LF3131LF3191LF41LF4130LF4131LF4191LF51LF5130LF5131LF5191DESCRIPTIONPolypropylene Female Luer to 1/16" Hose BarbWhite Nylon Female Luer to 1/16" Hose BarbBlack Nylon Female Luer to 1/16" Hose BarbPurple Tint Polycarbonate Female Luer to 1/16" Hose BarbPolypropylene Female Luer to 3/32" Hose BarbWhite Nylon Female Luer to 3/32" Hose BarbBlack Nylon Female Luer to 3/32" Hose BarbPurple Tint Polycarbonate Female Luer to 3/32" Hose BarbPolypropylene Female Luer to 1/8" Hose BarbWhite Nylon Female Luer to 1/8" Hose BarbBlack Nylon Female Luer to 1/8" Hose BarbPurple Tint Polycarbonate Female Luer to 1/8" Hose BarbPolypropylene Female Luer to 5/32" Hose BarbWhite Nylon Female Luer to 5/32" Hose BarbBlack Nylon Female Luer to 5/32" Hose BarbPurple Tint Polycarbonate Female Luer to 5/32" Hose BarbNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com122122Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
LUERSPART NO.LF61LF6130LF6131LF6191LF8191DESCRIPTIONPolypropylene Female Luer to 3/16" Hose BarbWhite Nylon Female Luer to 3/16" Hose BarbBlack Nylon Female Luer to 3/16" Hose BarbPurple Tint Polycarbonate Female Luer to 3/16" Hose BarbPurple Tint Polycarbonate Female Luer to 1/4" Hose BarbFEMALE LUERSPART NO.PMLM21PMLM2130PMLM2131DESCRIPTIONPolypropylene Panel Mount Male Luer to 1/16" Hose BarbWhite Nylon Panel Mount Male Luer to 1/16" Hose BarbBlack Nylon Panel Mount Male Luer to 1/16" Hose BarbPANEL MOUNT MALE LUERSPMLM31PMLM3130PMLM3131Polypropylene Panel Mount Male Luer to 3/32" Hose BarbWhite Nylon Panel Mount Male Luer to 3/32" Hose BarbBlack Nylon Panel Mount Male Luer to 3/32" Hose BarbPMLM41PMLM4130PMLM4131Polypropylene Panel Mount Male Luer to 1/8" Hose BarbWhite Nylon Panel Mount Male Luer to 1/8" Hose BarbBlack Nylon Panel Mount Male Luer to 1/8" Hose BarbPMNUTSSTPMNUT30Stainless Steel 1/4-28 UNF NutWhite Nylon Panel Mount 1/4-28 UNF NutNote: Panel mount luers require a ¼" diameter panel openingPART NO.PMLF21PMLF2130PMLF2131DESCRIPTIONPolypropylene Panel Mount Female Luer to 1/16" Hose BarbWhite Nylon Panel Mount Female Luer to 1/16" Hose BarbBlack Nylon Panel Mount Female Luer to 1/16" Hose BarbSee page 125 for compatible rotatingand stationary locking rings. Colorcodedrings also available.PANEL MOUNT FEMALE LUERSPMLF31PMLF3130PMLF3131Polypropylene Panel Mount Female Luer to 3/32" Hose BarbWhite Nylon Panel Mount Female Luer to 3/32" Hose BarbBlack Nylon Panel Mount Female Luer to 3/32" Hose BarbPMLF41PMLF4130PMLF4131Polypropylene Panel Mount Female Luer to 1/8" Hose BarbWhite Nylon Panel Mount Female Luer to 1/8" Hose BarbBlack Nylon Panel Mount Female Luer to 1/8" Hose BarbPMNUTSSTPMNUT30Stainless Steel 1/4-28 UNF NutWhite Nylon Panel Mount 1/4-28 UNF NutNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.comNote: Panel mount luers require a ¼" diameter panel openingSee page 125 for compatiblecolor-coded rings.123123
LUERSMALE SLIP LUERSPART NO.SLM21SLM2130SLM2131SLM2191SLM31SLM3130SLM3131SLM3191SLM41SLM4130SLM4131SLM4191SLM51SLM5130SLM5131SLM5191SLM61SLM6130SLM6131SLM6191See page 125 for compatible rotatingand stationary locking rings.DESCRIPTIONPolypropylene Male Slip Luer to 1/16" Hose BarbWhite Nylon Male Slip Luer to 1/16" Hose BarbBlack Nylon Male Slip Luer to 1/16" Hose BarbPurple Tint Polycarbonate Male Slip Luer to 1/16" Hose BarbPolypropylene Male Slip Luer to 3/32" Hose BarbWhite Nylon Male Slip Luer to 3/32" Hose BarbBlack Nylon Male Slip Luer to 3/32" Hose BarbPurple Tint Polycarbonate Male Slip Luer to 3/32" Hose BarbPolypropylene Male Slip Luer to 1/8" Hose BarbWhite Nylon Male Slip Luer to 1/8" Hose BarbBlack Nylon Male Slip Luer to 1/8" Hose BarbPurple Tint Polycarbonate Male Slip Luer to 1/8" Hose BarbPolypropylene Male Slip Luer to 5/32" Hose BarbWhite Nylon Male Slip Luer to 5/32" Hose BarbBlack Nylon Male Slip Luer to 5/32" Hose BarbPurple Tint Polycarbonate Male Slip Luer to 5/32" Hose BarbPolypropylene Male Slip Luer to 3/16" Hose BarbWhite Nylon Male Slip Luer to 3/16" Hose BarbBlack Nylon Male Slip Luer to 3/16" Hose BarbPurple Tint Polycarbonate Male Slip Luer to 3/16" Hose BarbLUER CAPS AND PLUGSPART NO.LCAPLCAP30LCAP31DESCRIPTIONPolypropylene Luer CapWhite Nylon Luer CapBlack Nylon Luer CapLPLUGLPLUG30LPLUG31Polypropylene Luer PlugWhite Nylon Luer PlugBlack Nylon Luer PlugBuy Online! FitQuik Connectors are available for fastdelivery from colder.com or visit colder.com to findyour local distributor.Note: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com124124Copyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
LUERSPART NO.LMSLLMSL30LMSL31LMSL32LMSL33LMSL34LMSL35LMSL36LMSL91DESCRIPTIONPolypropylene Stationary Luer Lock RingWhite Nylon Stationary Luer Lock RingBlack Nylon Stationary Luer Lock RingYellow Nylon Stationary Luer Lock RingBlue Nylon Stationary Luer Lock RingRed Nylon Stationary Luer Lock RingGreen Nylon Stationary Luer Lock RingOrange Nylon Stationary Luer Lock RingPurple Tint Polycarbonate Stationary Luer Lock RingColor-coded rings can be used for visual line identificationor to prevent connector rotation in panel mountapplications.LUER ACCESSORIESPART NO.LMSRLMSR30LMSR31LMSR32LMSR33LMSR34LMSR35LMSR36LMSLR91DESCRIPTIONPolypropylene Rotating Luer Lock RingWhite Nylon Rotating Luer Lock RingBlack Nylon Rotating Luer Lock RingYellow Nylon Rotating Luer Lock RingBlue Nylon Rotating Luer Lock RingRed Nylon Rotating Luer Lock RingGreen Nylon Rotating Luer Lock RingOrange Nylon Rotating Luer Lock RingPurple Tint Polycarbonate Rotating Luer Lock RingPART NO.PMRLPMRL30PMRL31PMRL32PMRL33PMRL34PMRL35PMRL36DESCRIPTIONPolypropylene Luer Color Coded RingWhite Nylon Luer Color Coded RingBlack Nylon Luer Color Coded RingYellow Nylon Luer Color Coded RingBlue Nylon Luer Color Coded RingRed Nylon Luer Color Coded RingGreen Nylon Luer Color Coded RingOrange Nylon Luer Color Coded RingPART NO.PMNUTSSTDESCRIPTIONStainless Steel 1/4-28 UNF NutNote: Parts not shown to scale. For customer drawings and technical specifications please visit www.colder.com125125
Custom CapabilitiesConnector solutions from Colder add value to your product by making your fluid and air connections easy to use and morereliable, increasing your product’s modularity and serviceability and providing an overall cleaner, faster, safer and smarterway to make a connection. If you can’t find the perfect solution from one of our thousands of standard products or you’d liketo simply off-load the connector portion of your project to allow you to focus on your core technologies, Colder EngineeredSolutions can help.Multi-Tube CouplingsConnect multiple lines with one easy connectionCUSTOM CAPABILITIESCustom Tube ConnectionsConnect to a wide variety of types and sizes of tubingManifoldPackaged bottle capdip-tube assemblyPolycarbonateelbowMetal non-spillwithout thumb latchCap with ventIndustrialDesign126|Calltollfree1800 1-800-444-2474 4442474orvisitus satwwwcoldercomwww.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Mounting OptionsApplication specific connections including threads, caps, snap-fits and moreCONSIDER ACUSTOM-DESIGNEDCONNECTOR WHEN:A quick disconnect will add value toyour product, make it easier to useand more reliableYour specifications cannot be metby an existing standard ColderproductUnique requirements, budgets ortiming warrant your designer’scollaboration with Colder’sEngineered Solutions TeamCUSTOM CAPABILITIES2-way valve Dual-line connector Air/fluid/electronictube setRFID weight scaleconnectorRFID panelIn-line filter|Calltollfree1800 1-800-444-2474 4442474orvisitus satwwwcoldercomwww.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.127
Hybrid CouplingsConnect both fluid and electronics – at thesametimetimeTECHNICAL CUSTOM CAPABILITIESINFORMATIONSmart Connections with RFID - Exclusive!Identify misconnections, automatically identify fluidcharacteristics, capture connection usage data - thepossibilities sibilities are endless!128| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Metal Non-Spill CouplingsRobust housing with high flow plastic valvesCustom MaterialsA wide range of materials are available to meet application needsCUSTOM CAPABILITIES| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company, CColder Products and CPC are registered trademarks with the US Patent & Trademark Office.129
AccessoriesTERMINATIONFERRULELESSPOLYTUBE FITTING,PTF†PIPE THREAD TUBING TUBING DIMENSION PART NO. LENGTH10-32* 1/8" .07" ID .125 OD TF1002 .6410-32* 1/4" .17" ID .250 OD TF1004 .861/8" NPT 1/8" .07" ID .125 OD TF2002 .981/8" NPT 1/4" .17" ID .250 OD TF2004 1.101/8" NPT 3/8" .25" ID .375 OD TF2006 1.241/4" NPT 1/4" .17" ID .250 OD TF4004 1.201/4" NPT 3/8" .25" ID .375 OD TF4006 1.34TERMINATIONFERRULELESSPOLYTUBE FITTINGNUTS, PTF†REPLACEMENTPARTSTUBING PART NO. TUBING PART NO.1/8" OD 153600 4.0mm OD 2697005/32" OD 269700 8.0mm OD 3395001/4" OD 100800 10.0mm OD 3584003/8" OD 108900DESCRIPTIONINSERT SEALSREPLACEMENTPARTSCOUPLING SERIES BUNA-N FLUOROCARBON EPDMMC, PMC, PMC12, PLC12 730800 730804 730803LC, PLC, EFC, APC, Twin Tube, ZLC 731100 731104 731103SMC, Twin Tube small o-ring 730600 730604 730603HFC/FFC, NS6, NSH, BreakAway 731600 731604 731603ACCESSORIESSealingDESCRIPTIONPANEL MOUNTNUTSDESCRIPTIONDUST CAPS & PLUGSNon-sealingPOLYPROPYLENE (PP)COUPLING SERIES NUTS NICKEL BRASS ACETAL 316 STAINLESS POLYSULFONE (PSF)MC, PMC, PMC12 100900 664400 100901 —LC, PLC, EFC, PLC12, APC 120700 520300 120701 —HFC, ZLC, BreakAway — — — 621300 (PP)694300 (PSF)SRC, SMF 404300 — — —NS4 ABS 2137600 — — —NS6 — — — 1884400COUPLING SERIES BODY PLUG INSERT CAPMC, PMC non-sealing PMC31 PMC32LC, PLC non-sealing PLC310 PLC320APC, EFC non-sealing — PLC320PMC pressure-sealing PMC30 —PLC pressure-sealing PLC300 —HFC/FFC non-sealing (not shown) HFC312 L (with leash)HFC312 (no leash)Manifolds<strong>Specifications</strong> | Material: Aluminum | Finish: Black anodizedDESCRIPTION10-32 PortedManifold with 1/8"NPT End PortPART NO. SIDE PORTS END PORTS LENGTH32M3 3 1 2.30"32M4 4 1 2.80"32M5 5 1 3.30"DESCRIPTION1/8" NPT PortedManifold with 1/8"NPT End PortPART NO. SIDE PORTS END PORTS LENGTH2M3 3 1 3.10"2M4 4 1 4.00"2M5 5 1 4.90"DESCRIPTION1/4" NPT PortedManifold with 1/4"NPT End PortPART NO. SIDE PORTS END PORTS LENGTH4M3 3 2 3.80"4M4 4 2 4.80"4M5 5 2 5.80"JG ® Push-To-Connect AccessoriesDESCRIPTION TUBING PART NO. DESCRIPTION TUBING PART NO.IN-LINE LOCKING CLIPS, RED 1/4" Tube OD 1011900 IN-LINE COLLET COVERS, 1/4" Tube OD 1012101 to 063/8" Tube OD 1012000 COLOR CODED 3/8" Tube OD 1012201 to 06Colors available, shown right. Please indicate color using the following suffix codes: 01=Black, 02=Red, 03=Yellow, 04=Gray, 05=Blue, 06=Green(Example: 1012101 is the code for a 1/4" collet cover in black.) NOTE: See pages 32 and 33 for JG couplings.†NOTE: Colder’s Ferruleless Polytube Fitting terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed forsemi-rigid tubing, i.e., polyethylene, nylon, polyurethane, etc. *NOTE: Gaskets are not included with 10-32 PTF style fittings. To prevent leakage with these fittings, we recommend using LOCTITE ®Removable Threadlocker 242 or Permanent Threadlocker 262.130| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Sterilization and Disinfectant MethodsMATERIAL KEYY= Excellent,recommendedmaterial for thissterilizationmethodN= No,not recommendedN/A = Not ApplicableDISINFECTANTSFORMALINISOPROPYL ALCOHOLETHYL ALCOHOLETHYLENEOXIDEMETHODAUTOCLAVE E-BEAMIRRADIATION50 KILOGRAYSGAMMAIRRADIATIONMETALS302 STAINLESS STEEL Y Y Y Y Y Y Y Y316 STAINLESS STEEL Y Y Y Y Y Y Y YCHROME-PLATEDBRASS-CDA 360 N Y Y Y Y Y Y YPOLYMERSABS N N/A Y Y N Y Y NACETAL Y Y Y Y Y N N NLDPE Y Y Y Y N Y Y NNYLON* Y N N Y N N N NPOLYCARBONATE Y Y Y Y Y Y Y YPOLYPROPYLENE* Y Y Y Y N Y Y NPOLYSULFONE Y Y Y Y Y Y Y YELASTOMERSNITRILE/BUNA-N Y Y Y N N Y Y YSILICONE Y Y Y Y Y Y Y YKALREZ ® Y Y Y Y Y N N YEPR/EPDM Y Y Y Y Y Y Y YFKM/VITON ® Y Y Y N N N N YSterilization MethodsDISINFECTANTS: 70°F (20°C), Formalin, ethyl alcohol, etc.Sterilize coupled or uncoupled.ETHYLENE OXIDE, EtO: Four hours, 100% EtO @ 110°F(43°C), up to five repetitions, coupled or uncoupled.AUTOCLAVE:Polycarbonate: 250°F (121°C), 30 minutes, up to 10repetitions. Sterilize uncoupled only.Polysulfone: 270°F (132°C) for 60 minutes, up to 25repetitions. Sterilize uncoupled only.Steam-Thru Connection: 265°F (129°C) for 30 minutes, up totwo cycles. (part number specific)HFC39: 270°F (132°C) for 60 minutes, up to 25 repetitions foruncoupled units and up to one repetition for coupled units.ELECTRON BEAM (E-BEAM): Maximum cumulative exposureof 50 kilograys. Sterilize coupled or uncoupled.GAMMA: Maximum cumulative exposure of 50 kilograys.Sterilize coupled or uncoupled.DRY HEAT: 250°F (121°C), 12 hours, no pressure. Sterilizeuncoupled only.SIP PROCESS:Up to 266°F (130°C) for 60 minutes (Steam-Thru Connection)Up to 275°F (135°C) for 60 minutes (Steam-Thru II Connection)*For FitQuik Connectors sterilization information please contact info@FittingsExpress.com.| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.50 KILOGRAYSRegulatory and ComplianceDRYHEATFDA and USDAThe U.S. Food and Drug Administration publishes, through theCode of Federal Regulations, standardized criteria which govern theacceptability of materials used in food contact. The U.S. Departmentof Agriculture publishes similar standards that mirror FDA criteria.Neither agency approves or disapproves products for particularapplications. Most of Colder’s products are made using resins thatcomply with applicable FDA or USDA standards. When necessary, thestandard o-ring seals are replaced with specific, recognized materials.NSFNSF International, based in Ann Arbor, Michigan, develops andpublishes consensual criteria that govern the acceptability ofmaterials and equipment used in food and beverage processing.They also do testing to verify the performance of materials or devicesto their published criteria. Colder lists many of its product lines underthe criteria of NSF/ANSI Standard 169 (formerly C-2), which governscomponents used in food and beverage contact applications.ISO 9001:2008 CertificationISO 9001:2008 is a standard which assures consistency of a productordered by customers. Organizations having ISO 9001:2008certification have demonstrated compliance to the ISO 9001:2008requirements by an independent registration authority. ColderProducts Company’s Quality Management System has beenapproved and certified under the ISO 9001:2008 standard.Regulation of Hazardous SubstancesThe RoHS Directive stands for "the restriction of the use of certainhazardous substances in electrical and electronic equipment". ThisDirective bans the placing on the EU market of new electrical andelectronic equipment containing more than agreed levels of lead,cadmium, mercury, hexavalent chromium, polybrominated biphenyl(PBB) and polybrominated diphenyl ether (PBDE) flame retardants.Cleanroom ManufacturingColder Products Company manufactures certain Life Sciences andChemical Management product lines in a cleanroom certified byan external testing service to meet or exceed ISO Class 7 (10,000)at 0.5 mm per ISO 14644 and the former Federal Standard 209E.Certification data can be provided upon request.250°F131TECHNICAL INFORMATION
TECHNICAL INFORMATIONCoupling Material DescriptionsThermoplasticsABSEconomical medical-grade thermoplastic that withstands gamma ande-beam sterilization. It is commonly used in medical devices. ABS is anamorphous material with good physical properties and high resistanceto chemical attack.AcetalStrong, lightweight and economical used for a wide variety ofchemical and mechanical components. Acetal offers high strengthand rigidity over a broad temperature range, low wear, toughness andresistance to repeated use.Polyamide (Nylon)Very resistant to wear and abrasion, good mechanical propertieseven at elevated temperatures, low permeability to gases and goodchemical resistance.PEEK (Polyetheretherketone)Highly temperature resistant, engineered thermoplastic with excellentchemical and fatigue resistance. It exhibits superior mechanical andelectrical properties.PolycarbonateResistant to some chemicals, withstands sterilization and istransparent. It is commonly used in medical devices and offersimpact resistance, outstanding dimensional stability and good opticalproperties.PolyethyleneLow-cost, chemically resistant thermoplastic. It is opaque andcan withstand reasonably high temperature. Polyethylene, unlikepolypropylene, cannot withstand normally required autoclavingconditions.PolypropyleneExcellent general purpose resin that is highly resistant to chemicalattack from solvents and chemicals in harsh environments. In general,polypropylene is resistant to environmental stress cracking and it canbe exposed to challenging environments.PolysulfoneRigid material with excellent strength, good chemical resistance,withstands repeated sterilization and higher temperatures than otherthermoplastics. Its high hydrolytic stability allows its use in medicalapplications requiring autoclave and steam sterilization.PPS (Polyphenylene Sulfide)Broadest resistance to chemicals for its market as an advancedengineering plastic. (PEEK and PTFE have better resistance, but are notconsidered engineering resins.)FluoropolymersPTFEChemically resistant to all chemicals and solvents with the exceptionof some molten metals, molten sodium hydroxide, elemental fluorine,and certain fluorinating agents. PTFE offers chemical resistance andstability at high temperature.PVDFTough engineering thermoplastic with a balance of physical andchemical properties that qualify it for high performance in a widerange of applications. It is mechanically strong and tough, has goodductility and has a broad, useful temperature range.AlloysAluminumLightweight metal with an available hard anodized finish for durability.Aluminum is non-toxic, non-magnetic and non-sparking and is knownfor its high strength to weight ratio.Chrome-plated BrassRugged metallic material with an attractive appearance, chromeplatedbrass is excellent for higher pressure and temperature.Die-cast ZincDurable and lightweight (about 20% less than comparable brass)material that withstands high pressure and temperature.O-RingsBuna-NThe most common o-ring material is Buna-N due to its solvent, oil andwater resistance. It has a temperature range of -30° to 250° F.EPDMEthylene-propylene-diene rubber (EPDM, also sometimes referred toas EPR) is a chemically resistant family of compounds. Colder uses highquality peroxide cured EPDMs that provide exceptional resistance totemperatures with a wide range of chemicals.FFKM (Chemraz ® , Simriz ® , Kalrez ® )Broadest range of chemical resistance of any elastomeric material,combining the resilience and sealing force of an elastomer withchemical resistance approaching that of PTFE.FKMWell known for its outstanding resistance to heat, oxidation,weathering and ozone. The temperature range is -15°to 400°F.Food-gradeCommonly used when food, beverages or potable water is goingthrough the coupling.PFA & FEP Encapsulated SealsEncapsulated seals combine the resiliency of the elastomer with thesuperior chemical resistance of the fluoropolymer to achieve a sealthat is lower cost than a pure fluoroelastomer FFKM seal.SiliconeSeals have good temperature resistance. The temperature range is-70°to 400°with special compounds that can reach 175°to 450°F.Silicone can also be supplied with Class VI requirements for lifesciences applications.ElastomersTPEThermoplastic Elastomer (TPE) is a blend of additives and copolymersin a special formulation that forms extremely durable bonds to asubstrate, while offering the traditional properties of soft-touchovermold.TPVThermoplastic Vulcanizate (TPV) is an alloy of polypropylenethermoplastic and fully vulcanized EPDM rubber. TPV is typicallyresistant to water, acids and bases.Don’t forget: you can alwaysvisit www.colder.com for part-specificchemical compatibility information.132| Call toll free 1-800-444-2474 or visit us at www.colder.comCopyright © 2011 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.
Colder Products Company1001 Westgate DriveSt. Paul, Minnesota 55114U.S.A.Phone: 651-645-0091Fax: 651-645-5404Toll Free: 800-444-2474info@colder.comwww.colder.comColder Products Company GmbHSchmalweg 50D-55252 Mainz-KastelGermanyPhone: +49-6134-2878-0Fax: +49-6134-287828cpcgmbh@colder.comwww.colder.comColder Products Company LimitedRoom 1503, 15/F, SBI Center54 – 58 Des Voeux Road CentralHong KongPhone: 852-2987-5272Fax: 852-2987-2509asiapacific@colder.comwww.colder.comDistributed BY:Colder Patent Statement: Colder Products Company takes pride in its innovative quick disconnect coupling and fittings solutions, many of which have beenawarded United States and International patents. Colder Products Company has a strong tradition of leadership in the quick disconnect market, and aggressivelypursues and protects its proprietary information and intellectual property. In cases where it is practical and as a benefit to its customers, Colder ProductsCompany has licensed its proprietary technology. Please contact Colder Products to discuss your unique needs.CPC Warranty Statement: Colder Products Company warrants its products against defects in workmanship and materials for a period of 12 months from thedate of sale by Colder Products Company to its initial customer (regardless of any subsequent sale of the products). This warranty is void if the product is misused,altered, tampered with or is installed or used in a manner that is inconsistent with Colder Product Company’s written recommendations, specifications and/orinstructions, or fails to perform due to normal wear and tear. Colder Products Company does not warrant the suitability of the product for any particular application.Determining product application suitability is solely the customer’s responsibility. Colder Products Company is not liable for special, indirect, incidental, consequentialor other damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly arising from the use of or inability to useits products either separately or in combination with other products. ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WHETHER ORAL, WRITTEN OR IN ANY OTHERFORM, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED.The sole and exclusive remedy under this warranty is limited, at the option of Colder Products Company, to replacement of the defective product or an account creditin the amount of the original selling price. All allegedly defective Colder Products Company products must be returned prepaid transportation to Colder ProductsCompany, together with information describing the product’s application and performance, unless otherwise authorized in writing by Colder Products Company.Colder Trademark Statement: AseptiQuik ® , ChemQuik ® , DrumQuik ® , IdentiQuik ® , Steam-Thru ® , and Softube ® are registered trademarks with the U.S. Patent &Trademark office. BreakAway, Twin Tube, Sixtube, Tentube and SaniQuik are registered trademarks with the U.S. Patent & Trademark Office. All othertrademarks or service marks are property of their respective owners.WARNING: Due to the wide variety of possible fluid media and operating conditions, unintended consequences may result from the use of this product, all ofwhich are beyond the control of Colder. It is the user’s responsibility to carefully determine and test for compatibility for use with their application. All such risksshall be assumed by the buyer.CAT2020 12/11 GLS/15k Printed in U.S.A.
Change language