Bayoumi CV June 1 2004.pdf - Mechanical Engineering - University ...

• V. Giurgiutiu, A.E. Bayoumi, “Mechatronics and Smart Structures: Emerging EngineeringDisciplines for the Next Millennium, Paper # M2000-002, 7 th Mechatronics Forum InternationalConference, Atlanta, GA, September, 2002• M. K. Khraisheh, A. E. Bayoumi and S. Barnwal, “On the Mechanics Hole Making using anEnd-Mill Cutter,” Proceedings of the Society of Engineering Science, September 2001• M. K. Khraisheh and A. E. Bayoumi, “On the Mechanistic Modeling of Cutting Forces of MillingOperations: A Control Algorithm,” NAMR Conference, 2001• X. Deng, C. Shet, and A. E. Bayoumi, "A Finite Element Study of Waterjet Assisted OrthogonalCutting,” Proceedings of the 37 th Society of Engineering Science Annual Technical Meeting(SES 2000), University of South Carolina, Columbia, SC, October 2001.• G. Yucesan, J. Khan, and A. E. Bayoumi, “A Least Square Parameter Estimation Algorithm forInvestigation of the Clearance Rubbing in Helical End Milling,” Proceedings of the 37 th Societyof Engineering Science Annual Technical Meeting (SES 2000), University of South Carolina,Columbia, SC, October 2000.• G. Yucesan, J. Khan, and A. E. Bayoumi, “The Effect of Feed Rate and Rake Angle onClearance Rubbing in Helical End Milling of Ti6Al4V,” Proceedings of the 37 th Society ofEngineering Science Annual Technical Meeting (SES 2000), University of South Carolina,Columbia, SC, October 2000.• M. K. Khraisheh, A. E. Bayoumi, and S. Barnwal, “On the Mechanistic Modeling of CuttingForces of Milling Operations: Hole Making using an End-Mill Cutter,” NAMR 1999• C. H. Hamilton, H. M. Zbib and A. E. Bayoumi, " Mechanical Characterization and ConstitutiveModeling for Superplastic Forming Processes: Theory and Applications," The 1995 NSFDesign and Manufacturing Grantee Conference, January 4-6, 1995• Q. Xie, A. E. Bayoumi and H. M. Zbib, "Characterization of Chip Formation and Shear Bandingin Orthogonal Machining Using Finite Element Analysis," International Mechanical EngineeringCongress and Exposition, Chicago Ill., AMD-Vol. 183, MD – Vol. 50, 1994• K. Zhang, M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton and H. M. Zbib," Anisotropy andTransient Effects in Superplastic Deformation," Proceedings of the ICSAM, Moscow, Russia,May 23-25, 1994• M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton and H. M. Zbib, "Multiaxial Deformation ofSuperplastic Materials," The 1994 NSF Design and Manufacturing Grantee Conference,Cambridge Massachusetts, January 5-7, 1994• K. Zhang, M. K. Khraisheh, A. E. Bayoumi, C. H. Hamilton, A. E. Bayoumi and H. M. Zbib,"Mechanical Characterization of Superplastic Materials using Tension/Torsion Methods, The1994 NSF Design and Manufacturing Grantee Conference, Cambridge Massachusetts,January 5-7, 1994• X. D. Ding, H. M. Zbib, C. H. Hamilton and A. E. Bayoumi, " On the Stability of SuperplasticForming Processes, The 1994 NSF Design and Manufacturing Grantee Conference,Cambridge Massachusetts, January 5-7, 1994• A. E. Bayoumi, "On the Formability/Instability Experimental Mechanics of Sheet MetalForming," The 22nd Midwestern Mechanics Conference, 1991• R. B. Joshi, A. E. Bayoumi, and H. M. Zbib, "An Investigation on the Instability of Plastic Flowusing A Digital Image Processing Technique," The Eleventh U.S. National Congress of AppliedMechanics, 1990• G. L. Sheldon, A. E. Bayoumi and A. R. Brown, "A Parametric Study on Improving Tool Life byElctrospark Deposition," Proc. Intl. Conf. WEAR, 1989• A. E. Bayoumi and Q. Xie, "A Study on Machined Subsurface and Tool Wear," Proc. Intl. Conf.Prod. Research, Nottingham, United Kingdom, 1989• A. E. Bayoumi and S. Wojcicki, "Chemical Furnace Synthesis of Cutting Tool Materials basedon Tungsten Carbide Ceramics," Second Topical Conference on Emerging Technologies inMaterials; Amer. Inst. of Chemical Engineers, San Francisco, 1989A. E. Bayoumi, 6/1/2004, 8