OPERATOR'S MANUAL - Furuno

CAUTIONCheck the zinc plate (anticorrosionmeasure) regularly for corrosion andreplace it when the ship is drydocked.Corrosion may occur. As a result thetransducer may fall out, allowing water toleak inside the vessel.Do not use the equipment for other thanits intended purpose.Damage to the equipment or bodilyinjury may result if the equipment ismisused.Do not transmit with the transducer outof water, when drydocked, etc.The transducer may become damaged.Turn off the power at the switchboardimmediately whenever you feel theequipment is abnormal.WARNING LABELA warning label is attached to thetransceiver and monitor units. Do notremove the labels. If a label is missingor damaged, contact a FURUNO agent ordealer about replacement.WARNINGTo avoid electrical shock, do notremove cover. No user-serviceableparts inside.Transceiver UnitName: Warning Label (1)Type: 86-003-1011-1Code No.: 100-236-231Monitor UnitName: Warning Label (2)Type: 03-129-1001-1Code No.: 100-236-741TFT LCDThe high quality TFT LCD displays 99.99%of its pixels. The remaining 0.01% of pixelsmay light or dropout, however this is notan indication of malfuction; it is acharacteristic of the LCD.Turn off the equipment at the switchboardif it becomes warm or is making strangenoises. Contact your dealer at your earliestconvenience.iii