P-TEST - Tecnoideal Srl

HOLDER FOR BAGSTesting of medical plasticbags requires the use ofdedicated holders to containthe plastic deformationdue to the test pressure.Use of holders is also recommended:DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. CODE 000462 REV. 01 DTD 04_2013• to reduce test volume• to increase test pressurefor easier identificationof the leakHolders are available in two versions (different surface):Flat surface: for testing simple bags. Surface contact is 100%: this is indicated d to test the welding perimeter.Knurled surface: designed to test bags in which a leak on the film can be easily detected because the airescape is not blocked. Surface contact is 25%.ACCESSORIESHolder 300x400mm, flat surface 98085Holder 300x400mm, knurled test surface 98172Holder 400x500mm, flat test surface 98086Holder 400x500mm, knurled test surface 98087Foot Switch for P-TESTUsb cable for P-TEST One/PlusHOW TO ORDERP-TEST One.sys (data extraction software)P-TEST Plus.sys (data extraction software)T70239T19221T78076T78077Marketed in U.S.A., Canada, Mexico, Caribbeans:Mrs. JO ANN PATTITel. 001 910 789 0021e-mail: jpatti@ix.netcom.com - www.tecnoidealsrl.comMarketed in South America by :São Paulo - SP - BrazilTel. 0055 011 37172006www.alvimed.com.br - e-mail: info@alvimed.com.brMarketed in Germany, Poland, Serbia, Austria, Czech Republic,Hungary and Slovakia by:Begonienstraße 1 D-90542Eckental - Brand - DETel. 0049 09126 2948 0 - Fax. 0049 09126 294828www.modenplast.de - e-mail: international@modenplast.deMANUFACTURED BYTecnoidealVia Lea Cazzuoli, 43 - 41037 MIRANDOLA (MO) - ITALY Phone +39 0535 23653 - Fax +39 0535 27443www.tecnoidealsrl.com - e-mail: sales@tecnoidealsrl.com