Data sheet Hinged Cover KD1 E2 - Electraplan Solutions GmbH

UNDERFLOOR-INSTALLATION TECHNOLOGY
Data sheet Hinged Cover KD1 E2
Description:
Model number Flooring heights Colour Article number
KD1 E2R5 7011 5 mm Iron grey HUF-351 422 010
KD1 E2R5 9005 5 mm Jet black HUF-351 422 090
KD1 E2R8 7011 8 mm Iron grey HUF-351 432 010
KD1 E2R8 9005 8 mm Jet black HUF-351 432 090
Specification:
Hinged cover with carpet protection frame made of polyamide according DIN VDE 0634 part 1, for covering
thickness 5 or 8 mm.
For 4 installation devices in 2 device casings GBS…, GBP…or GBM….
Fixing set for clamp range 5 - 15 mm plus the flooring thickness mentioned at the hinged cover.
For junction boxes, flush floor trunking system, floor-mounted trunking system.
Installation height from 50 mm.
Other fixing sets are available on request.
Version:
Thickness
of flooring material: Maximum 5 mm at the lid of KD1 E2R5 ...
Maximum 8 mm at the lid of KD1 E2R8 ...
Range of application: Dry cleaned floors
Flooring frame: The carpet protective frame overlap the trimmed edge and avoid the fray out of the
carpet. Hinged cover have to be installed after laying of the flooring material.
Electraplan Solutions GmbH
Osterbrooksweg 69
D-22869 Schenefeld
Tel.: +49 (0) 40 83990-0
Fax: +49 (0) 40 83990-109
info@electraplan-solutions.de
www.electraplan-solutions.com
We intend for our printed matter to provide advice to the best of our knowledge.
However, no legally binding effect can be derived from them. We reserve the right
to make changes in the interests of technical advancement. All rights reserved. Copying
in whole or in excepts only with permission in written form.

UNDERFLOOR-INSTALLATION TECHNOLOGY
Technical Data:
Material: Polyamide PA6, halogen free, eroded surface structure
Colour: RAL 7011 (iron grey), RAL 9005 (jet black) or special colour on request
Weight: 0,5 kg
Outside dimension: 161 mm x 262 mm
Installation dimension: 147 mm x 247 mm
Minimum installation height: 50 mm at 5 mm height of flooring material
53 mm at 8 mm height of flooring material
Maximum Load: until 1500 Newton
Flooring material cut-out:
Equipment:
Number of power sockets:
4 units power sockets
in 2 device casing GBSS2
Accessories, optional:
Device casing GBSS2
with twin power socket
Electraplan Solutions GmbH
Osterbrooksweg 69
D-22869 Schenefeld
Tel.: +49 (0) 40 83990-0
Fax: +49 (0) 40 83990-109
info@electraplan-solutions.de
www.electraplan-solutions.com
Model number Colour Articlenumber
Packing
unit
GBSS2 -9010 Pure white HUF-416 101 050 1 pc
GBSS2 -2004 Pure orange HUF-416 101 070 1 pc
GBSS2 -3000 Flame red HUF-416 101 090 1 pc
Device casing for hinged cover KD E2 or KD Q4.
With protective earth-power socket 2pole + E 16A/250 Volt.
Inclusive 2 strain relief.
We intend for our printed matter to provide advice to the best of our knowledge.
However, no legally binding effect can be derived from them. We reserve the right
to make changes in the interests of technical advancement. All rights reserved. Copying
in whole or in excepts only with permission in written form.