Marley Eternit brochure - Build It Green

PlainThe authentic cross camber design of theMarley Eternit concrete plain tile gives it a lookto match its outstanding versatility.168mm267mmColour availabilityMosborough Red (S)Old English Dark Red (S)Smooth Brown (S)Smooth Grey (S)Anthracite (S)Natural Red (F)Dark Red (G)Antique Brown (G)Greystone (G)Key(G) Granular finish(S) Smooth finish(F) Fine Sanded finishClay plain feature tilesAvailable in a range of colours and shapes.Clay plain feature tiles can be used with concrete plain tiles.For advice on the use of Feature tiles in main roof areascontact the Technical Advisory Service.Technical dataSize of tile 267mm x 168mmMinimum pitch* 35°Maximum pitch 90°Minimum headlap 65mm (Roof)37.5mm (Vertical)Maximum gauge 100mm (Roof)115mm (Vertical)Profile depth d < 5mmCover width (nominal) 168mmCovering capacity 60 tiles/m 2(net)at 100mm gauge (Roof)53 tiles/m 2at 115mm gauge (Vertical)Weight of tiling 73.8kg/m 2 (0.72 kN/m 2 )(approx.)at 100mm gauge (Roof)58kg/m 2 (0.57 kN/m 2 )at 115mm gauge (Vertical)Battens required 10 lin.m/m 2(net)at 100mm gauge (Roof)8.7 lin.m/m 2at 115mm gauge (Vertical)Batten size 38 x 25mm for rafters/recommended supports not exceeding(fixed to BS 5534) 600mm centresTile nails38mm x 2.65mmAuthority BS EN 490* The minimum recommended pitch and lap may be influencedby special circumstances, please contact the TechnicalAdvisory Service.Club Bullnose Fishtail † Hexagonal †† Made to orderBS EN 49010 Concrete plain tiles