12.07.2015 Views

Trapper LTD - Bell Laboratories

Trapper LTD - Bell Laboratories

Trapper LTD - Bell Laboratories

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TRAPPER ® RAT GLUE/TRAPPER ® MOUSE GLUE/TRAPPER ® BULK GLUE/TRAPPER ® PRO PACK MSDSMANUFACTURER'S ADDRESS:BELL LABORATORIES, INC.3699 Kinsman Blvd, Madison, WI 53704PREPARED BY:PSM/CARTELEPHONE NO:(608) 241-0202PRODUCT NAME: TRAPPER ® RAT GLUE/TRAPPER ® MOUSEGLUE/TRAPPER ® BULK GLUE/TRAPPER ® PRO PACKUSE:Rodent Control DeviceCHEMICAL NAME AND SYNONYM:N/ASECTION I. HAZARDOUS INGREDIENTSEMERGENCY PHONENOS:Medical(877) 854-2494Transportation (Spills)(800) 424-9300 CHEMTRECEPA REGISTRATION NO.Not RequiredACTIVE INGREDIENTS: % BY WEIGHT CURRENT TLVNone N/A N/AThis product contains no components subject to the reporting requirements of Section 313 of the SuperfundAmendment and Reauthorization Act (SARA) of 1986SECTION II. PHYSICAL DATAAPPEARANCE:SolidCOLOR:ClearODOR:NoneSPECIFIC GRAVITY:N/AVAPOR DENSITY:N/AMELTING POINT:N/AWATER REACTIVITY:N/AEVAPORATION RATE:N/AVAPOR PRESSURE:N/ABOILING POINT:N/ASOLUBILITY:Soluble in mineral spiritsSECTION III. FIRE AND EXPLOSION DATABULK DENSITY:6.2 lbs/galFLASH POINT (Method Used):N/AFLAMMABLE LIMIT:Upper Limit: N/ALower Limit: N/AAUTOIGNITION TEMP:N/AEXTINGUISHING MEDIA:Extinguish with water, foam or inert gas.SPECIAL FIREFIGHTING PROCEDURES:NoneUNUSUAL FIRE OR EXPLOSION HAZARDS:NoneSECTION IV. REACTIVITY HAZARD DATASTABILITY:StablePOLYMERIZATION:Will not occurCONDITIONS TO AVOID:NoneCONDITIONS TO AVOID:NoneINCOMPATIBILITY (MATERIALS TO AVOID):NoneSECTION V. TOXICITY DATAHAZARDOUS DECOMPOSITION PRODUCTS:NoneLD50, ORAL (INGESTION):N/ADERMAL SENSITIZATION:N/ALD50, DERMAL (SKIN CONTACT):N/ASKIN IRRITATION:N/ALC50, INHALATION:N/AEYE IRRITATION:N/ATrade Name: <strong>Trapper</strong> Glue, <strong>Trapper</strong> <strong>LTD</strong>, <strong>Trapper</strong> Insect Monitor, <strong>Trapper</strong> Max Date Last Updated: February 2008Supplier: <strong>Bell</strong> <strong>Laboratories</strong>, Inc. Page 1 of 2


TRAPPER ® GLUE/TRAPPER ® <strong>LTD</strong>/ TRAPPER ® INSECT MONITOR/TRAPPER ® MAX MSDSSECTION VI. HEALTH HAZARDSPRIMARY ROUTE OF ENTRY:N/ASIGNS & SYMPTOMS OF EXPOSURE:NoneEMERGENCY FIRST AID PROCEDURES:Eyes: Flush with cool water for at least 15 minutes.Skin: Remove glue with mineral spirits. Wash skin with soap and water.Inhalation: Remove person to fresh air.Ingestion: Call physician or emergency phone number immediately, Do not give anything by mouth or induce vomiting unless instructedby physician.NOTE TO PHYSICIAN: NoneSECTION VII. CONTROL & PROTECTIVE MEASURESRESPIRATOR TYPE:Not requiredEYE PROTECTION:Not requiredOTHER PROTECTIVE MEASURES:Not requiredGLOVES (Recommended):Not requiredVENTILATION:Not requiredNATIONAL FIRE PROTECTION ASSOCIATION (NFPA) RATINGS:HEALTH: 0 (Minimal) FIRE: 0 (Will not burn) REACTIVITY: 0 (Stable) SPECIFIC HAZARD: NoneHAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS) RATINGS:HEALTH: 0 (Minimal) FLAMMABILITY: 0 (Minimal) REACTIVITY: 0 (Minimal) PROTECTIVE EQUIPMENT: NoneSECTION VIII. SPILL OR LEAK PROCEDURESSTEPS TO BE TAKEN IN THE EVENT MATERIAL IS RELEASED OR SPILLED:General clean-up. Remove glue by applying mineral spirits to spilled area, follow up by washing area with warm water and detergent.WASTE DISPOSAL METHOD:Wastes resulting from use may be disposed of on-site or at an approved waste disposal facility. Dispose of wastes in accordance with allapplicable Federal, state and local regulations.SECTION IX. SPECIAL PRECAUTIONS & STORAGE DATASTORAGE TEMPERATURE:Room temperatureSPECIAL SENSITIVITY (HEAT, LIGHT, MOISTURE):NoneAVERAGE SHELF LIFE:StablePRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:Store in original container in a cool, dust-free environment. Wash thoroughly with soap and water after handling.SECTION X. SHIPPING DATADOT SHIPPING NAME:None requiredDOT LABELS REQUIRED:None requiredDOT HAZARD CLASSIFICATION:Non-hazardousFREIGHT CLASSIFICATION:LTL Class 60WARRANTY:The information provided in the Material Safety Data Sheet has been obtained from source believed to be reliable. <strong>Bell</strong> <strong>Laboratories</strong>, Inc. provides no warranties, eitherexpressed or implied, and assumes no responsibility for the accuracy or completeness of the data contained herein. This information is offered for your consideration andinvestigation. The user is responsible to ensure that they have all current data relevant to their particular use.Trade Name: <strong>Trapper</strong> Glue, <strong>Trapper</strong> <strong>LTD</strong>, <strong>Trapper</strong> Insect Monitor, <strong>Trapper</strong> Max Date Last Updated: February 2008Supplier: <strong>Bell</strong> <strong>Laboratories</strong>, Inc. Page 2 of 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!