Automax Valve Automation Systems Pneumatic Actuators and ...

flowserve.comControls & AccessoriesControlsS25N Directional Valve*The Automax Directional Valve mountsdirectly to SuperNova series actuatorswhich eliminates the cost of tubingand fittings. The valves are availablefor double acting and spring returnactuators with NEMA 4X, 7 & 9, orintrinsically-safe and low powersolenoid operators. These valveshave been tested and proven reliablefor over 1 million cycles.APS1 Module*The Automax APS1 module workswith the Automax S25N solenoidvalve and diverts exhaust air frombetween the pistons into the springchamber. This prevents corrosiveatmospheres from being pulled intothe spring chamber.APS2 Module*The Automax APS2 module workswith remote/line mounted solenoidvalves and diverts exhaust air frombetween the pistons into the springchamber. This prevents corrosiveatmospheres from being pulled intothe spring chamber.LV1 Lockout & Vent Valve*The LV1 Lockout and Vent Valvemodule provides two primaryfunctions. The LV1 may be used witha manual override to shut off supplyair and vent actuator ports. The LV1may also be used as a pneumaticlockout valve which, when properlyimplemented, will satisfy OSHAStandard 1910.47. The LV1 maybe sandwich mounted with otherAutomax NAMUR accessories ormay be used with the NPT1 adaptor.FC1, FCDA & FCSR*The ‘FC’ Series Flow Control modulesprovide compact flow controls forprecise adjustment of SuperNovaactuator speeds. The Flow ControlModules may be sandwich mountedwith other Automax accessories ormay be used with the NPT1 adaptor.* Consult individual catalogs and IOMs for additional informationAccessories“Pharos” NAMUR Indicator*Provides an economical solution forpositive visual indication of the actuatorposition. Constructed of tough industrialengineered resin, the UltraIndicator canbe used on actuators that utilize aNAMUR mounting interface.UltraSwitch GL/XCL/PL Series RotaryPosition Indicators*The UltraSwitch series of positionindicators provides a compact andeconomical package for both visualand remote electrical indication of valveposition. Models are available in bothdie cast aluminum and non-metallicversions. Suitable for non-hazardous,hazardous and intrinsically-safeapplications.Aviator II and BUSwitch RotaryPosition Indicator with InternalPilot Solenoid*The Aviator rotary position indicatorenclosure with internal pilot solenoidcoil provides a truly integrated package.It can easily be converted to a BUSwitchby simply adding a Fieldbus communicationprinted circuit board.APEX Modular Positioner*Epoxy coated aluminium construction,the Apex positioner combines precisevalve positioning with advanced features.A modular manifold base allows 3-15 psipneumatic control signals, or 4-20 mAsignals with the addition of the I/Pmodule. Models are available forcorrosion resistant applications andhazardous locations as defined by UL,C-UL, ATEX, and SAA.Lockouts*The lockout option permits easy lockoutof automated valves. Lockouts aredesigned to withstand the rated outputtorque of the actuator, with the intentto meet the requirements of OSHAStandard 1910.47 “The Control ofHazardous Energy” (Lockout/Tagout.)Gear Overrides*Declutchable gear overrides are optionswhich allow local manual control ofactuated valves and dampers. The gearoverrides are sized for easy operationand can be combined with other controlaccessories.AutoBrakits*Automax heavy-duty mounting kits aredesigned to close tolerances to assureconsistency and proper alignment,which are essential to ensuremaximum actuator and valvecycle life.11