PS21k CS-F85-20 - FF Solar
PS21k CS-F85-20 - FF Solar
PS21k CS-F85-20 - FF Solar
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PS21k</strong> <strong>CS</strong>-<strong>F85</strong>-<strong>20</strong><strong>Solar</strong> Surface Pump SystemSystem OverviewHeadFlow rateTechnical Datamax. 50 mmax. 1<strong>20</strong> m³/hController <strong>PS21k</strong>▪ Control inputs for dry running protection, remote control etc.▪ Protected against reverse polarity, overload and overtemperature▪ Integrated MPPT (Maximum Power Point Tracking)Powermax. 19 kWInput voltagemax. 800 VOptimum Vmp*> 575 VMotor currentmax. 27 AEfficiency max. 98 %Ambient temp. -30...50 °CEnclosure classIP41Motor AC DRIVE <strong>CS</strong>-F 15kW▪ Highly efficient 3-phase AC motor▪ Frequency max. 51 HzEfficiency max. 92 %Motor speed1.150...2.905 rpmPower factor 0,87Insulation classFEnclosure classIP55Pump End PE <strong>CS</strong>-<strong>F85</strong>-<strong>20</strong>▪ Premium materialsPump Unit PU <strong>CS</strong>-<strong>F85</strong>-<strong>20</strong> (Motor, Pump End)Water temperature max. 70 °<strong>CS</strong>uction headmax. 3 mStandards<strong>20</strong>06/42/EC, <strong>20</strong>04/108/EC, <strong>20</strong>06/95/ECIEC/EN 61702:1995,IEC/EN 62253 Ed.1The logos shown reflect the approvals that have been granted for thisproduct family. Products are ordered and supplied with the approvalsspecific to the market requirements.*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperatureBERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.deCreated by LORENTZ COMPASS 3.0.10.29All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actualproducts depending on local market requirements and regulations.
<strong>PS21k</strong> <strong>CS</strong>-<strong>F85</strong>-<strong>20</strong><strong>Solar</strong> Surface Pump SystemPump ChartVmp* > 575 VNPSHThe NPSH (Net Positive Suction Head) is NOT the operating suction head. To calculate the operating suction head please refer to theinstallation manual.*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperatureBERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.deCreated by LORENTZ COMPASS 3.0.10.29All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actualproducts depending on local market requirements and regulations.
<strong>PS21k</strong> <strong>CS</strong>-<strong>F85</strong>-<strong>20</strong><strong>Solar</strong> Surface Pump SystemDimensions and WeightsControllerPump Unit [ng]H = 350 mmH1 = 310 mmH2 = 295 mmW1 = 250 mmW2 = 235 mmD1 = <strong>20</strong>0 mmD2 = 167 mmNet weightControllerPump UnitMotorPump End9,0 kg192 kg117 kg75 kgBERNT LORENTZ GmbH & Co. KGKroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany,Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.deCreated by LORENTZ COMPASS 3.0.10.29All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actualproducts depending on local market requirements and regulations.
Change language