3182 Wall-mounted Room Thermostat with Display RDG400

More documents

Recommendations

Info

Functions• Maintain room temperature via built-in temperature sensor or external roomtemperature / return air temperature sensor• Automatic or manual changeover between heating and cooling mode• Select applications via DIP switches• Select operating mode via the operating mode button on the thermostat• Display current room temperature or setpoint in °C and/or °F• Minimum and maximum setpoint limitation• Keypad lock (automatic and manual)• 3 multifunctional inputs, freely selectable for:– Operating mode switchover contact (key card, window contact etc)– Automatic heating/cooling changeover sensor– External room temperature or return air temperature– Dewpoint sensor– Electric heater enable– Fault input• Minimum and maximum limitation of air flow signal DC 0..10 V• Floor heating temperature limit• Reload factory settings for commissioning and control parametersApplicationsSingle duct• DC 0…10 V damper actuatorV• 3-pos damper actuatorYVThe thermostat supports following applications, which can be configured by DIP-switchon the rear side of the thermostat. The control output for the damper actuator is eitherDC 0…10 V (factory-setting) or 3-position (see parameter P47), and for the auxiliaryheating/cooling output either ON/OFF, PWM, 3-pos or DC 0…10 V respectively.Application DIP-switch Control outputMTB1ONOFF1 2 3 4 5DC 0..10 V3-posSingle duct with auxiliary heater• DC 0…10 V damper actuator and either2-pos, PWM or 3-pos auxiliary heater• 3-pos damper actuator and DC 0…10 Vauxiliary heaterVYVMYETB1ONOFF1 2 3 4 5DC 0..10 VON/OFF, PWM or 3-posSingle duct and radiator / floor heating• DC 0…10 V damper actuator and either2-pos, PWM or 3-pos radiator• 3-pos damper actuator and DC 0…10 VradiatorYVYRTB1ONOFF1 2 3 4 5DC 0..10 VON/OFF, PWM or 3-posSingle duct heating and cooling coil• DC 0…10 V damper actuator and either2-pos, PWM or 3-pos heating and cooling• 3-pos damper actuator and DC 0…10 Vheating and coolingVYVMY1TB2TB1ONOFF1 2 3 4 5DC 0..10 VON/OFF, PWM or 3-pos2/9Siemens RDG400 – Room Thermostat N3182enBuilding Technologies 17 April 2009
Type summaryType reference Operating Voltage Number of control outputsON/OFF PWM 3-pos DC 0..10 VRDG400 AC 24 V 1 1) 1 1) 1 1) 11) Either ON/OFF, 3-pos or PWMEquipment combinationsType of unit Type reference Data SheetCable temperature sensor QAH11.1 1840Room temperature sensor QAA32 1747DC 0..10 V actuatorCondensation detector / Supply unitElectrical actuator, DC 0..10 V(for radiator valve)Electrical actuator, DC 0..10 V(for 2 and 3 port valves / V…P45)Electrical actuator, DC 0..10 V(for small valve 2,5 mm)Electrical actuator, DC 0..10 V(for small valves 5.5 mm)Electromotoric actuator, DC 0..10 V(for valves 5.5 mm)Thermal actuator, DC 0..10 V(for small valves and radiator valves)QXA2000 /AQX20001542SSA61... 4893SSC61… 4895SSP61… 4864SSB61... 4891SQS65… 4573STS61 4880GQD161… 4605GDB161…GLB161…4634DC 0…10 V damper actuatorGMA161… 4614GEB161… 4621GCA161… 4613GBB161…GIB161…4626VAV compact controllerGDB181.1E/3GLB181.1E/33544ON/OFF actuatorsElectromotoric ON/OFF valve andactuator(only available in AP, UAE, SA and IN)MVI…/MXI… 4867Electromotoric ON/OFF actuator SFA21... 4863Thermal actuator (for radiator valve) STA21... 4893Siemens RDG400 – Room Thermostat N3182enBuilding Technologies 17 April 20093/9
Page 1: 3 182Wall-mounted RoomThermostat wi
Page 5 and 6: Display1171615141312112345667 8 9 1
Page 7 and 8: Technical dataPower supplyOutputsIn
Page 9: Connection diagramsApplication: Sin

3182 Wall-mounted Room Thermostat with Display RDG400

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?