MagicWave 4000 / 5000 TransTig 4000 / 5000 - Ambitex

TECHNICAL DATAMW 4000 MW 5000Power source TT 4000 TT 5000Mains voltage 3 x 400 V 3 x 400 VMains voltage tolerance ± 15 % ± 15 %Mains fuse protection (slow-blow) 35 A 35 APrimary continuous current (100 % d.c.) 15.5 kVA 1 17.9 kVA 2Cos phi 0.99 0.99Welding current range TIG 3 - 400 A 3 - 500 AMMA 10 - 400 A 10 - 500 AWelding current at:10 min/40 °C (104 °F) 40 % d.c. – 500 A10 min/40 °C (104 °F) 45 % d.c. 400 A –10 min/40 °C (104 °F) 60 % d.c. 365 A 440 A 710 min/40 °C (104 °F) 100 % d.c. 310 A 350 AOpen-circuit voltage 86 V 86 VWorking voltage TIG 10.1 - 26.0 V 10.1 - 30.0 VMMA 20.4 - 36.0 V 20.4 - 40.0 VIgnition voltage (Up)* 9.5 kV 9.5 kVDegree of protection IP 23 IP 23Type of cooling AF AFInsulation class F FDimensions LxWxH (with handle) mm 625x290x705 3 625x290x705 3Inches 24.6x11.4x27.8 4 24.6x11.4x27.8 4Gewicht 58.2 kg 5 58.2 kg 5128 lb 6 128 lb 6*The arc ignition feature is suitable for manual operation.1On the TT 4000: 11.8 kVA 5On the TT 4000/5000: 39.8 kg2On the TT 5000: 15.1 kVA 6On the TT 4000/5000: 87.7 lb3On the TT 4000/5000: 625x290x475 mm 7 On the TT 5000: 450 A4On the TT 4000/5000: 24.6x11.4x18.7 inWelding torch TTW 4000 A TTW 5000 AWelding current: AC 350 A 400 ADC 400 A 500 ADuty cycle 60 % 60 %Electrode diameters 1.0 - 4.0 mm 1.6 - 6.4 mmWeight 0.96 kg / 2.1 lb 0.985 kg / 2.2 lbCooling unitFK 4000 RCooling capacity at Q = 1 l/min. +40 °C / 1000 WMax. delivery rate3.5 l/minCoolant volume5.5 lDegree of protection IP 23Dimensions LxWxH mm 700 x 280 x 250Inches 27.6 x 11.0 x 9.8Weight (without coolant)16.3 kg / 35.9 lbCHECKLISTDigital weld-process controlMicroprocessor controlEnergy-saving inverter technologyGenerator-compatibleThermostat-controlled fan / overtemperature protectionEarth leakage monitoringContinuous welding-current adjustment from torchRemote-controllableSwitchover facility between touchdown and HF ignitionAutomatic gas post-flow (dep. on welding current)Gas-test functionAutomatic cooling-unit cut-outAnti-stick functionFreely selectable parameters on the welding torchJob modeAutomatic cap-shaping functionPolarity reversalRPI ignitionKeylock switchRate-of-flow watchdog for torch cooling systemExternal current-flow signalRobot interface, analogue/digitalCold-wire controlOperating modes2-step mode / 4-step modeTAC (programmed tack-welding)AC / DCSpecial 4-step modeTIG-PulsSpot weldingDigital indication ofRun-statusOperating modeWelding voltage, welding amperage (actual value)“Hold” functionOvertemperatureService codeMains voltage monitoringJob numberAdjustable parametersWelding power (continuously adjustable)Electrode diametersGas pre-flow time / gas post-flow timeCrater-fill current / start-arcUpSlope / DownSlopeHot-Start / arc-force dynamicAC balance / AC frequency / AC waveform• as standard o optionalMWMW JobTTTT Job••••••••••••••••••••••••••••••••••••••••••••••••••••• •• •••••••o o o oo o o oo o o oo oo o••••••••••• •• •• •••••••••••••••••••••••••••••• •••••••••••••••••••••••••••Text and illustrations technically correct at time of going to print. We reserve the right to make modifications.This document may not be copied or otherwise reproduced, whether in part or in its entirety, without the express prior written consent of Fronius International GmbH.FRONIUS INTERNATIONAL GMBHBuxbaumstrasse 2, P.O.Box 264, A 4602 WelsTel: +43 7242 241-0, Fax: +43 7242 241-3940E-Mail: sales@fronius.comwww.fronius.comAmbitexRepresentações, Importações eExportações, Lda.Vale de Cambra - PortugalTelefone +351 256 472 352Fax +351 256 425 938geral@ambitex.ptwww.ambitex.pt40,0006,2451 (1/05)