Wrapid Bond⢠- Canusa-CPS
Wrapid Bond⢠- Canusa-CPS
Wrapid Bond⢠- Canusa-CPS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Wrapid</strong> BondA visco-elastic adhesive based system for pipelinecorrosion protectionThe product informationshown here is intended as aguide for standard products.Consult your <strong>Canusa</strong>representative forspecific projects orunique applications.Sleeve Operating Characteristics Test Method Typical ValueMaximum Pipeline Operating Temp.Resistance to Circumferential ForcesResistance to Soil StressResistance to Axial Pipe MovementMain Line Coating CompatibilityUp to 80°C (175°F)Very GoodVery GoodVery GoodPE, PP, FBE, PU, Coal tar, BitumenTypical Product PropertiesThickness Measured > 1.8 mmDensity ASTM D792 1.1 - 1.3 g/cm 3Impact Resistance* EN 12068 15 JIndentation Resistance* EN 12068 0.60 mm remaining (pass)Peel Strength* EN 12068 > 0.5 N/mm Cohesive failureLap Shear Strength EN 12068 0.02 N/mm²Glass Transition Temp. ASTM D3418 < -20°CCathodic Disbondment Resistance* ASTM G8/EN 12068 2 mm @ 23°CCathodic Disbondment Resistance* ASTM G42/ EN 12068 1 mm @ 60°CElectrical Resistance* EN 12068 > 10 15 ohm/cmUnwinding Test @ -30°C EN 12068 No separation, tears or cracksLow Temp. Flexibility @ -30°C EN 12068 No separation, tears or cracksWater Absorption ASTM D570 < 0.05%Drip Resistance EN 12068 Pass at 90°C* When used with <strong>Wrapid</strong> CoatPVC. Refer to the <strong>Wrapid</strong> Coat PVC data sheet for more information.<strong>Canusa</strong>-<strong>CPS</strong>A division of ShawCor Ltd.Head Office25 Bethridge Rd.Toronto, ON M9W 1M7 CanadaTel: +1 416 743 7111Fax: +1 416 743 5927CanadaSuite 3200, 450 - 1st Street S.W.Calgary, AB T2P 5H1 CanadaTel: +1 403 218 8207Fax: +1 403 264 3649Americas2408 Timberloch Place, Building C-8The Woodlands, TX 77380 USATel: +1 281 367 8866Fax: +1 281 367 4304Europe, Middle East, Africa & RussiaUnit 3, Sterling Park,Gatwick Road, Crawley, West SussexRH10 9QT United KingdomTel: +44 1293 541254Fax: +44 1293 541777Asia-Pacific101 Thomson Road,#11-03 United Square307591 SingaporeTel: +65 6749 8918Fax: +65 6749 8919<strong>Canusa</strong>-<strong>CPS</strong> is registeredto ISO 9001:2008Since 1967, <strong>Canusa</strong>-<strong>CPS</strong> has been a leading developer and manufacturer of specialty pipeline coatingsfor the sealing and corrosion protection of pipeline joints and other substrates. <strong>Canusa</strong>-<strong>CPS</strong> highperformance products are manufactured to the highest quality standards and are available in a numberof configurations to accommodate many specific project applications.<strong>Canusa</strong> warrants that the productconforms to its chemical and physicaldescription and is appropriate for the usestated on the product data sheet whenused in compliance with <strong>Canusa</strong>’s writteninstructions. Since many installation factorsare beyond our control, the user shalldetermine the suitability of the productsfor the intended use and assume all risksand liabilities in connection therewith.<strong>Canusa</strong>’s liability is stated in the standardterms and conditions of sale. <strong>Canusa</strong>makes no other warranty either expressedor implied. All information contained inthis data sheet is to be used as a guideand is subject to change without notice.This data sheet supersedes all previousdata sheets on this product. E&OEPDS_<strong>Wrapid</strong> Bond_rev021
Change language