Korra got cUPC certificate

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or acombination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of thesupplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth inthe characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the productacceptance by Authorities Having Jurisdiction.Effective Date: October 2011 Void After: October 2012Product: Shower Panel Assembly File No. 7637Issued To:Foshan Korra Bath Ware Co., Ltd.No. 5 Xing Ye Dong RoadZone A, Shishan Science &Technology Industry ParkFoshan City, GD 528225ChinaIDENTIFICATION:The shower panel shall bear a permanent, legible marking to identify themanufacturer. The marking shall be the tradename, trademark, or othermark known to identify the manufacturer markings shall be located wherethey can be seen after installation. Individual components produced byother manufacturer shall be so identified.Each shower head shall be marked with ASME A112.18.1-2005/CSAB125.1-2005 to demonstrate compliance with that standard. The markingshall be by means of either a permanent mark on the product , a label onthe product , or tag attached to the product.Each shower head or body spray shall be permanently and legibly markedwith the actual flow rate or the maximum flow rate allowed by ASMEA112.18.1. The flow rate shall be marked in both liters per minute(L/Min) and gallons per minute (GPM).For the most accurate and updated information please visit http://pld.iapmo.org/7637This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence ofnon-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.Any alteration of this certificate could be grounds for revocation of the listing.

Page 2Void After: October 2012Product: Shower Panel Assembly File No. 7637Issued To:Foshan Korra Bath Ware Co., Ltd.Packaging markings shall comply with ASME A112.18.1-2005/CSAB125.1-2005. The Product shall also bear the cUPC® certificationmark.CHARACTERISTICS:Shower panel assemblies for new or retrofit installations, to beinstalled in accordance with the manufacturer's instructions and therequirements of the latest edition of the Uniform Plumbing Code®.Products comply with the applicable sections of the latest edition ofthe Uniform Plumbing Code®. Models listed to the National Plumbing Codeof Canada and Relevant Canadian Standard(s) shall bear the cUPC® mark ofconformity. Manufactured in compliance with IGC 154-2009 & ASMEA112.18.1-2011/CSA B125.1-11.Products listed on this certificate have been tested by an IAPMO R&Trecognized laboratory. This recognition has been granted based upon thelaboratory's compliance to the applicable requirements of ISO/IEC17025.

Page 3Void After: October 2012Product: Shower Panel Assembly File No. 7637Issued To:MODELS:Foshan Korra Bath Ware Co., Ltd.Model No. DescriptionK-J01 920 x 920 x 1930K-J02 814 x 1930K-J03 814 x 1930K-K02 1220 x 870 x 1930K-K04 1220 x 1930K-R01 1066 x 1066 x 1930K-R02 965 x 965 x 1930K-R03 1220 x 875 x 1930K-R05 965 x 965 x 1930K-S02 1220 x 875 x 1930K-S03 1220 x 1930DOC#081A

Page 4Void After: October 2012Product: Shower Panel Assembly File No. 7637Issued To:Foshan Korra Bath Ware Co., Ltd.ADDITIONAL COMPANY INFO:DOC#081A