ONE WORLD. ONE CLAMP. YOUR WAY

ONE WORLD. ONE CLAMP. YOUR WAY82M-3 Power Clamps

2Pneumatic Power ClampsSeries 82M-3 Product OverviewFeatures:• Modular design• Enclosed body, dirt-resistant• Aluminum body• Toggle-action mechanism• Manual locking/unlockingin case of pressure loss• Adjustable opening angle(without additional parts)Application:• Clamping, holding andpositioning of metalsheets and other parts,mainly in fixtures andhandling systems82M-3 Series40mm, 50mm, 63mm and80mm enclosed, lightweightpower clampsDriveshafts availablefor every arm style[Euro and NAAMS]Opening angleadjustment withinductive sensorManual lock andunlock accessMultiple patentspending82M-3 Technical InformationWithout SensorModelMax.HoldingWith InductiveSensor ConnectorM12x1, FixedTorqueNm [lb ft]ClampingTorque at5 barNm [lb ft]Max.OpeningAngleSideMountingPatternDriveshaft forArm Style82M-303004000 82M-3030040C8 380 120U-Arm120º 35 x 2582M-323004000 82M-3230040C8 [280] [89]Lateral, 16mmCylinder Ømm [in]40mmAirConsumptionper doublestroke at5 bardm3 [ft3]0,9[0.03]82M-303005000 82M-3030050C8800 270 120º 45 x 45 U-Arm 50mm 1,1and82M-323005000 82M-3230050C8 [590] [199]120º[0.04]50 x 45 Lateral, 21mm 50mm82M-303006300 82M-3030063C8120º 50 x 45 U-Arm 63mm82M-323006N00 82M-323006NC8 1000 420120º[738] [310]55 x 45Lateral, 21mm 63mm82M-3D0006G00 82M-3D0006GC8 120º Lateral, 26mm 63mm2,6[0.09]Weightkg [lbs]2[4.40]3,3[7.3]4,2[9.2]82M-323008000 82M-3230080C8 300082M-323008N00 82M-323008NC8 [2214]850[625]135º 70 x 75 Lateral, 32mm 80mm6,0[0.21]9,2[20.24]www.destaco.comDimensions and technical information are subject to change without noticeCLAMPING TECHNOLOGY

B1B23 max.SWPneumatic Power Clamps3Series 82M-3 Standard Clamp DimensionsModel82M-30382M-32382M-3D0SW h9Ø40 Ø50 Ø63 Ø8016 19 22 28Dimensions ofthe driven shaftL17B31B24aPlan viewModel B23 Max. L17Ø40 Ø50 Ø63 Ø80 Ø40 Ø50 Ø63 Ø8082M-303 54 72 78 -- 9 12 12 --82M-323 68 90 96 140 16 21 21 3282M-3D0 -- -- 106 -- -- -- 26 --B1aB7D Automations power clampC Aluminium-light weight Integrated sensing systemB24B30B3B25Pivot point82M-303...82M-323...82M-3D0...Euro MountD Automations (NAAMS 82M-3****50**Mount shown, power left) clampC Aluminium-light weight Integrated sensing systemL2L18B27B6aD1aL7 L6L14L8B5B6B7aL8aB32B33L19B6aL3L9B5bL9aL1L19D4aH7D4H7D1B5aB61/4-18 NPTModelB 1± 0,182M-3****5N**82M-3****6E**82M-3****6N**82M-3****8N**BConnection1/4-18 NPT G1/4Power by compressed air, max. 6 barG1/4Operation with oil-free air is permissible ± 0,02Electrical data for inductive sensors82M-3****50** see "KSED-8EA-___" mP82M-3****55** The connector socket and the ( cable are not supplied ( with the unit. Ø82M-3****63** Clamping arms see separate data sheetsB3482M-3****6G** To complete the model number see model no. code82M-3****80**** Tolerance of the distance between the dowel holes ± 0,02BB BBB± 0,1± 0,1 ± 0,1± 0,1 ± 0,1m H H P ± 0,05B1 B1a B3 B5 B5a B5b B6 B6a B7 1) B7a 1) B24 B24a B25 ( B27 B30 B31 ( B32 ر0,1 ±0,1 ±0,1 - ±0,1 ±0,1 ±0,182M-3****40** G 1/4 50 36 -- 3 3,5 5 10 10 35 35 84 89 12 3,5 60 19 --82M-3****50** G 1/4 48 48 13 9 4,5 5 12 10 30 50 111,5 109-10 3,5 93 26,5 8,582M-3****5N** ¼-18B 1 BNPT 48B48 13 9 4,5B5B12 8 30B45B111,5 109 5 -- 93 26,5 --± 0,1 ± 0,1± 0,1 ± 0,1± 0,1 ± 0,1H H ± 0,0582M-3****63** G 1/4 54 52 13 9 4,5 5 12 10 30 50 111,5 109 10 3,5 93 26,5 --82M-3****6N** ¼-18 NPT 54 52 13 9 4,5 5 12 10 30 - 55 111,5 109 10 3,5 93 26,5 --82M-3****6G** G 1/4 54 52 13 9 4,5 5 12 10 30 55 111,5 109 10 3,5 93 26,5 --82M-3****80** G 1/4 76 72 21 -- 5 5 15 15 50 70 153 136 15 3,5 134 35 --82M-3****8N** ¼-18 NPT 76 72 21 -- 5 5 15 15 50 70 153 136 15 3,5 134 35 --ModelB33 B34 D1 D1a D4 D4a L1 L2 L3 L6 L7 L8 L8a L9 L9a L14 L18 L19H7 H7 ±0,05 +0,1 ±0,1 ±0,1 ±0,1 ±0,1 ±0,1 ±0,1 N982M-3****40** -- 65 M6 M6 6 6 298 159 119 25 40 7,5 38,5 25 25 45 47 882M-3****50** 38 72 M8 M10 8 10 345 193 143 36,5 55 11 55 32 45 63,5 71,5 1282M-3****5N** -- 72 M8 M8 8 8 345 193 143 36,5 55 11 40 32 45 63,5 -- --82M-3****63** -- 100 M8 M10 8 10 354 193 143 36,5 55 11 55 32 45 63,5 71,5 1282M-3****6N** -- 100 M8 M10 8 10 354 193 143 36,5 55 11 55 32 45 63,5 71,5 1282M-3****6G** -- 100 M8 M10 8 10 354 193 143 36,5 55 11 55 32 45 63,5 71,5 1282M-3****80** -- 134 M10 M12 8 12 455 260 190 50 80 15 65 50 75 90 96,5 1282M-3****8N** -- 134 M10 M12 8 12 455 260 190 50 80 15 65 50 75 90 96,5 121) Tolerance of the distance between the dowel holes ±0,02-L+L+CLAMPING TECHNOLOGYDimensions and technical information are subject to change without noticewww.destaco.com

4Pneumatic Power ClampsSeries 82M-3 Ordering Information, Spare Parts82M-3Base Model82M-3 Power ClampHand Lever00 without Hand LeverSensor00 without SensorC8 with SensorD8 with SensorL8 with SensorFor U-ClampDrive ShaftSize 4003 for U-style clamp arms(L17=9mm)23 for lateral/side clamp arms(L17=16mm)Size 5003 for U-Clamp Arms (L17=12mm)23 for Lateral Clamp Arms(L17=21mm)Pneumatic Cylinder40 40mm Cylinder with G Ports50 50mm Cylinder with G Ports, Euro + NAAMS Mount5N 50mm Cylinder with NPT Ports, Euro + NAAMS Mount63 63mm Cylinder with G Ports, Euro Mount6G 63mmCylinder with G Ports, NAAMS Mount6N 63mm Cylinder with NPT Ports, NAAMS Mount80 80mm Cylinder with G Ports8N 80mm Cylinder with NPT PortsFor LateralClampFor LateralSide ArmSize 6303 for U-Clamp Arms (L17=12mm)23 for Lateral Clamp Arms(L17=21mm)D0 for Lateral Clamp Arms(L17=26mm)Size 8023 for lateral/side clamp arms(L17=32mm)L17Spare PartsOrder No. Seal Kit and Piston Complete CylinderComplete SensingC8 Sensor D8 Sensor L8 Sensor82M-3****4** 8PW-046-2-00 8PW-126-1 8EA-127-1 8EA-129-1 8EA-128-182M-3****5** 8PW-036-2-00 8PW-127-1 8EA-127-1 8EA-129-1 8EA-128-182M-3****6** 8PW-037-2-00 8PW-128-1 8EA-127-1 8EA-129-1 8EA-128-182M-3****8** 8PW-133-1-00 8PW-133-1 8EA-132-1 8EA-134-1 8EA-136-1Shims for Clamping ArmModel A1 A2 D2 D3 B9 B10 B12 L1082ZB-SH40010,182ZB-SH4002 0,282ZB-SH4005 0,54282ZB-SH4010 1,06,5 7 6 20 20 1282ZB-SH4020 2,082ZB-SH4050 5,082ZB-SH500182ZB-SH50020,10,282ZB-SH5005 0,56582ZB-SH5010 1,06,5 9 10 30 30 1682ZB-SH5020 2,082ZB-SH5050 5,0www.destaco.comDimensions and technical information are subject to change without noticeCLAMPING TECHNOLOGY

Pneumatic Power Clamps5Diagram of Clamping Force at 5bar (72psi)82M-3...40.. L1=100mm82M-3...5*/6*.. L1=120mm82M-3...80.. L1=195mmMaximum Tooling Weight8Weight [Kg]7654321082M-3....5*..82M-3....40..82M-3....8*..82M-3....6*..75 100 125 150 175 200 225 250 275 300 325 375 400Radius [mm]Note:All values are at 6 bar and 1 secondopening and closing time.For arm offsets (L5) greater than 50mm,reduce values as follows:82M-3**40.. reduce by 85%82M-3**50/63.. reduce by 60%82M-3**80.. reduce by 60%Weight of arm must be includedL5Sensor Wiring Diagram of Electrical SystemSensing system immune tointerference from D.C. arcwelding and A.C. arc weldingInductive design:• C8 Connecting plug M12x1,parallel with cylinder• D8 Connecting plug M12x1,90° swivel• L8 Connecting plug M12x1,parallel with cylinder(DE-STA-CO)Pin Assignment:PlugM12x123 14+brown11greenopenS 0.1black -blue white44yellow33redclosedS 0.222CLAMPING TECHNOLOGYDimensions and technical information are subject to change without noticewww.destaco.com

D36Pneumatic Power ClampsSeries 82M-3 U-Arms Center, Euro-Style90° version L4 L5 180° versionfor dimensioningOpeningArea of interferenceXHold-down piecemust not protrudein the interior areaB2"R1" due to thearea of interferencemax. 0,5°B2SWOpeningL4L5R1for dimensioningXR1max. 0,5°SWPivot pointView X(for dimensioning)D2H7B4B12L10aL10B27L10(B9)B10B26B11ClampModel No.82M-3****40**82M-3****50**82M-3****5N**82M-3****63**82M-3****6N**82M-3****6G**82M-3****80**82M-3****8N**Arm Model No.Max. Opening90º VersionMax. Opening180º VersionWeightB2 B4 B9 B10±0,02■ 8UM401-00-117 120º 105º 0,44 11790■ 8UM401-15-117 120º 120º 0,47 117 9045 7 20■ 8UM401-25-117 120º 120º 0,51 117 9020■ 8UM401-45-107 120º 120º 0,51 107 80■ 8UM501-15-144 120º 105º 1,1■ 8UM501-25-144 120º 105º 1,1 144 64 9 30 105 30■ 8UM501-45-144 120º 120º 1,1■ 8UM631-15-144 120º 105º 1,1 144 64,3105■ 8UM631-25-144 120º 120º 1,2 144 64,3 1059 30■ 8UM631-45-144 120º 120º 1,3 144 64,3 10530■ 8UM631-75-204 120º 120º 1,7 204 82 165■ 8JG-169-2-01 135º 105º 3,5 17914064,5 9 30■ 8UM801-45-204 135º 135º 4,1 204 16530B11+0,1B12±0,2ClampModel No.82M-3****40**82M-3****50**82M-3****5N**82M-3****63**82M-3****6N**82M-3****6G**82M-3****80**82M-3****8N**■ Common in EuropeArm Model No.B26B27+0,2D2H7D3L4±0,1L5(-0,5º Max)■ 8UM401-00-117 820■ 8UM401-15-117 82 1536,1 6 7 22■ 8UM401-25-117 82 25■ 8UM401-45-107 72 45■ 8UM501-15-14415■ 8UM501-25-144 95 48,1 6 9 28 25■ 8UM501-45-144 45■ 8UM631-15-144 9528 15■ 8UM631-25-144 95 28 2554,1 6 9■ 8UM631-45-144 95 28 45■ 8UM631-75-204 107 30 75■ 8JG-169-2-01 1292076,1 6 9 35■ 8UM801-45-204 154 45L10±1,1L10a R1 SWJ7SW+0,02-0,00916 15 70 16 --20 19 75 -- 1920 19 80 -- 2225 23,7 108 28 --www.destaco.comDimensions and technical information are subject to change without noticeCLAMPING TECHNOLOGY

8Pneumatic Power ClampsSeries 82M-3 Lateral (Side), Euro-Style90° versionOpening anglemax. 0,5°L4L5180° versionL4L5B4B2R1R2Area of interferenceHold-down pieceswhich must be fixedon the clamp armmust not exceedthe width "L10" ofthe clamp arm inthe swivelling range"R1" on the innerside of the clamp arm.B2R1B4R2Opening anglemax. 0,5°Pivot pointClamp arm on the rightL10D2 H7(B9)D3B10B12B11B22To complete the model number see model no. code.Clamp arm sets consists of: clamp arm and set screws.Models with 2 lateral clamp arms require 2 clamp arm sets.Clamp arm on the leftClampModel No.Arm Model No.Max. Opening90º VersionMax. Opening180º VersionWeight B2 B4 B9B10±0,02B11+0,182M-3****40** ■ 8S401-15-117 120º 120º 0,5 117 45 7 20 9082M-3****50** ■ 8JG-070-1-01 120º 120º 0,982M-3****5N** ■ 8S501-25-144 120º 120º 1,0144 74 9 30 10582M-3****63** ■ 8JG-080-1-01 120º 120º 0,9 144 7410582M-3****6N** ■ 8S631-25-144 120º 120º 1,0 144 74 9 30 10582M-3****6G** ■ 8S631-75-204 120º 120º 1,5 204 78 16582M-3****80** ■ 8JG-1179-1-01 135º 135º 2,1 179 741409 3082M-3****8N** ■ 8S801-45-204 135º 135º 2,1 204 78 165ClampModel No.■ Common in EuropeArm Model No.B12±0,2 B22 D2H7D3L4±0,1L5(-0,5ºMax)L10 R1 R282M-3****40** ■ 8S401-15-117 20 1 6 7 22 15 16 70 24 1682M-3****50** ■ 8JG-070-1-011530 10 6 9 2882M-3****5N** ■ 8S501-25-144 2520 75 28 1982M-3****63** ■ 8JG-080-1-0128 1582M-3****6N** ■ 8S631-25-144 30 10 6 9 28 25 20 80 28 2282M-3****6G** ■ 8S631-75-204 30 7582M-3****80** ■ 8JG-1179-1-0120 303530 16 6 9 3510882M-3****8N** ■ 8S801-45-204 45 25 3328SWH8www.destaco.comDimensions and technical information are subject to change without noticeCLAMPING TECHNOLOGY

Pneumatic Power Clamps9Series 82M-3 Lateral (Side) Arms, NAAMS-Style, 50mm50 OFFSET SERIESXXX-XXXX-XR 20.0025 OFFSET SERIESXXX-XXXX-X50.0075.000 OFFSET SERIESXXX-XXXX-X25.0015.0015.00A20.00Ø11.00 THRU TYPØ8.00 F7 TYP140.00125.00110.0095.0080.0065.0050.000.00150.00120.0090.0090mm [3.54”] Arm LengthSeries Arm Style Model50 Offset ▲ • 226 B8JG-1226-125 Offset ▲ • 216 B8JG-1216-10 Offset ▲ • 206 B8JG-1206-1▲ Common in North America120mm [4.72”] Arm LengthSeries Arm Style Model50 Offset ▲ • 227 B8JG-1227-125 Offset ▲ • 217 B8JG-1217-10 Offset ▲ • 207 B8JG-1207-1(•) STANDARD ARM OFFERING150mm [5.90”] Arm LengthSeries Arm Style Model50 Offset ▲ • 228 B8JG-1228-125 Offset ▲ • 218 B8JG-1218-10 Offset ▲ • 208 B8JG-1208-1Maximum Opening AngleArm Styles 90A 90B 18A 18B 27A 27B206 - 208 120° 120° 90° 90° N/A N/A216 - 218 120° N/A 30° 120° N/A 30°226 - 228 120° N/A N/A 120° N/A 60°CLAMPING TECHNOLOGYDimensions and technical information are subject to change without noticewww.destaco.com

10Pneumatic Power ClampsSeries 82M-3 Lateral (Side) Arms, NAAMS-Style, 63mm120 OFFSET SERIESXXX-XXXX-X70 OFFSET SERIES25 OFFSET SERIESXXX-XXXX-XXXX-XXXX-X[3.94]100.00[2.76]70.00[4.72]120.00[5.91]150.000 OFFSET SERIESXXX-XXXX-X55.00 [2.17]25.00 [0.98]18.00 [0..71]15.00 [0.59]AR 28.00[1.10][0.98]25.00Ø11.00 [0.43] THRU TYPØ8.00 [0.31] F7 TYP275.00 [10.83]260.00 [10.24]245.00 [9.65]230.00 [9.06]215.00 [8.46]200.00 [7.87]185.00 [7.28]170.00 [6.69]155.00 [6.10]140.00 [5.51]125.00 [4.92]110.00 [4.33]95.00 [3.74]80.00 [3.15]65.00 [2.56]0.00[11.22]285.00[10.04]255.00[8.86]225.00[7.68]195.00[6.50]165.00[5.31]135.00135mm [5.31”] Arm LengthSeries Arm Style Model120 Offset ▲ • 043 B8JG-1043-170 Offset ▲ • 031 B8JG-1031-125 Offset ▲ • 019 B8JG-1019-10 Offset ▲ • 007 B8JG-1007-1165mm [6.50”] Arm LengthSeries Arm Style Model120 Offset ▲ 044 B8JG-1044-170 Offset ▲ • 032 B8JG-1032-125 Offset ▲ • 020 B8JG-1020-10 Offset ▲ • 008 B8JG-1008-1195mm [7.68”] Arm LengthSeries Arm Style Model120 Offset ▲ 045 B8JG-1045-170 Offset ▲ • 033 B8JG-1033-125 Offset ▲ 021 B8JG-1021-10 Offset ▲ • 009 B8JG-1009-1225mm [8.86”] Arm LengthSeries Arm Style Model120 Offset ▲ 046 B8JG-1046-170 Offset ▲ • 034 B8JG-1034-125 Offset ▲ 022 B8JG-1022-10 Offset ▲ 010 B8JG-1010-1255mm [10.04”] Arm LengthSeries Arm Style Model120 Offset ▲ 047 B8JG-1047-170 Offset ▲ • 035 B8JG-1035-125 Offset ▲ 023 B8JG-1023-10 Offset ▲ 011 B8JG-1011-1285mm [11.22”] Arm Length047 8Series •023120011OffsetArm Style▲ 048ModelB8JG-1048-170 Offset ▲ 036 B8JG-1036-125 Offset8▲ 024 B8JG-1024-10 Offset ▲ 012 B8JG-1012-1046•022010▲ Common in North America (•) STANDARD ARM OFFERING NON-STANDARD ARM OFFERING (extended leadtimes apply)Maximum Opening AngleArm Styles 90A 90B 18A 18B 27A 27B007 - 012 120° 120° 90° 90° N/A N/A019 - 024 105° N/A 45° 120° N/A 30°031 - 036 105° N/A N/A 120° N/A 60°043 - 048 105° 120° 120° 120° N/A 75°www.destaco.comDimensions and technical information are subject to change without noticeCLAMPING TECHNOLOGY

Pneumatic Power Clamps11Series 82M-3 Lateral (Side) Arms, NAAMS-Style, 80mm120 OFFSETR35.0070 OFFSET25 OFFSET105.00120.00155.000 OFFSET70.0060.0025.0024.0020.00A32.00Ø11.00 THRU TYPØ8.00 F7 TYP385.00370.00355.00340.00325.00310.00295.00280.00265.00250.00235.00220.00205.00190.00175.00160.00145.00130.00115.00100.0085.000(•) STANDARD ARM OFFERING155.00185.00215.00245.00275.00305.00335.00365.00395.00155mm [4.53”] Arm LengthSeries Arm Style Model120 Offset ▲ 170 B8JG-1170-170 Offset ▲ • 150 B8JG-1150-125 Offset ▲ 130 B8JG-1130-10 Offset ▲ 110 B8JG-1110-1245mm [9.65”] Arm LengthSeries Arm Style Model120 Offset ▲ 173 B8JG-1173-170 Offset ▲ 153 B8JG-1153-125 Offset ▲ 133 B8JG-1133-10 Offset ▲ 113 B8JG-1113-1335mm [13.19”] Arm LengthSeries Arm Style Model120 Offset ▲ 176 B8JG-1176-170 Offset ▲ 156 B8JG-1156-125 Offset ▲ 136 B8JG-1136-10 Offset ▲ 116 B8JG-1116-1185mm [7.28”] Arm LengthSeries Arm Style Model120 Offset ▲ 171 B8JG-1171-170 Offset ▲ 151 B8JG-1151-125 Offset ▲ 131 B8JG-1131-10 Offset ▲ 111 B8JG-1111-1275mm [10.83”] Arm LengthSeries Arm Style Model120 Offset ▲ 174 B8JG-1174-170 Offset ▲ 154 B8JG-1154-125 Offset ▲ • 134 B8JG-1134-10 Offset ▲ 114 B8JG-1114-1365mm [14.37”] Arm LengthSeries Arm Style Model120 Offset ▲ 177 B8JG-1177-170 Offset ▲ 157 B8JG-1157-125 Offset ▲ 137 B8JG-1137-10 Offset ▲ 117 B8JG-1117-1215mm [8.46”] Arm LengthSeries Arm Style Model120 Offset ▲ 172 B8JG-1172-170 Offset ▲ 152 B8JG-1152-125 Offset ▲ 132 B8JG-1132-10 Offset ▲ • 112 B8JG-1112-1305mm [12.00”] Arm LengthSeries Arm Style Model120 Offset ▲ 175 B8JG-1175-170 Offset ▲ • 155 B8JG-1155-125 Offset ▲ 135 B8JG-1135-10 Offset ▲ 115 B8JG-1115-1395mm [15.55”] Arm LengthSeries Arm Style Model120 Offset ▲ 178 B8JG-1178-170 Offset ▲ • 158 B8JG-1158-125 Offset ▲ 138 B8JG-1138-10 Offset ▲ • 118 B 8JG-1118-1▲ Common in North America (•) STANDARD ARM OFFERING NON-STANDARD ARM OFFERING (extended leadtimes apply)Maximum Opening AngleArm Styles 90A 90B 18A 18B 27A 27B100 - 118 135° 135° 105° 105° N/A N/A120 - 138 135° N/A 60° 120° N/A 30°140 - 158 120° N/A 30° 135° N/A 45°160 - 178 105° N/A N/A 135° N/A 75°CLAMPING TECHNOLOGYDimensions and technical information are subject to change without noticewww.destaco.com

Workholding• Widest variety of workholding products• High durability and reliability• Flexible solutions for all applications• Custom products for unique requirementsAutomation• Broad range of engineered automation products• Complementary products for modular integration• Unmatched accuracy, reliability and performance• Unparalleled global sales, service and engineering supportGLOBAL LOCATIONSNORTH AMERICADE-STA-CO HeadquartersAuburn Hills, MichiganTel: 1.248.836.6700Toll Free: 1.888.DESTACOMarketing: marketing@destaco.comCustomer Service: customerservice@destaco.comCharlevoix, MichiganTel: 1.888.DESTACOCustomer Service: customerservice@destaco.comWheeling, IllinoisTel: 1.800.645.5207Customer Service: camco@destaco.comRed Wing, Minnesota (Central Research Laboratories)Tel: 1.651.385.2142Customer Service: sales@centres.comSOUTH AMERICABrazilTel: 0800-124070Customer Service: samerica@destaco.comASIAThailandTel: +66-2-326-0812Customer Service: info@destaco.comChinaTel: +86-21-6081-2888Customer Service: china@destaco.comIndiaTel: +91-80-41123421-426Customer Service: india@destaco.comEUROPEGermanyTel: +49-6171-705-0Customer Service: europe@destaco.comFranceTel: +33-1-3996-5000Customer Service: france@destaco.comUKTel: +44-1902-797980Customer Service: uk@destaco.comSpainTel: +34-936361680Customer Service: spain@destaco.comNetherlandsTel: +31-297285332Customer Service: benelux@destaco.com1025 Doris RoadAuburn Hills, MI 48326 USATel 1.888.DESTACOFax 1.248.836.6901Email customerservice@destaco.comdestaco.com© Copyright, 2012 DE-STA-CO. All rights for layout, photos and text rest with the publisherDE-STA-CO. All photomechanical or other reproductions only with our express permission.All sales are based on our terms and conditions of sale, delivery and payment.DSC_82M3-C_0712_US_XXK SOTAD