Electronics - Dynacord

DSP 600
26
INPUTS
In the inputs, as well as the routing functions,
extensive editing possibilities are available:
Input Level Signal Generator PEQ GEQ Delay
• pilot-tone detection
• test signal generator
(pink noise, white noise, sine wave)
• VU meter for input signal
• 10-band parametric equalizer
• 31-band graphic equalizer
• delay
• input pad switch (-6 dB)
OUTPUTS
In each of the outputs there are two control areas.
ARRAY CONTROL
PEQ
DELAY PEQ X-OVER FIR
FILTER
ARRAY CONTROL (PER CHANNEL)
• 5-band parametric equalizer
• array delay
SPEAKER PROCESSING (PER CHANNEL)
• 6-band parametric equalizer
• cross-over (high-pass / low-pass filters),
Bessel, Butterworth, Linkwitz-Riley
• FIR-filter with 512 taps (high-pass,
low-pass, band-pass, speaker-specific)
A unique and particularly remarkable feature is
the multi-stage delay concept featuring dedicated
delays for different applications in complex audio
systems: the INPUT DELAY (1.000 ms) for synchronization
of the main PA to delay systems, the ARRAY DELAY
(100 ms) for the synchronization of individual loudspeaker
boxes within a cluster or stack, the X-OVER
DELAY (10 ms) for evening out the run-times of
individual loudspeaker components within a box,
SPEAKER PROCESSING
DELAY POLARITY LEVEL LIMITERS OUTPUT
LEVEL
• delay
• polarity
• look-ahead peak anticipation limiter
• temp limiter for thermal loudspeaker protection
• level & mute
• pilot tone generator
• VU metering
• output assignment display LEDs: Sub, Low, Mid, High
• gain reduction meters
and finally the CHANNEL DELAY (1.000 ms) for
evening out the run-times of e.g. subs and tops.
Its clear structure, its wealth of possibilities, its
exceptional user-friendliness, its outstanding audio
performance – particularly in combination with the
FIR-TUNE settings for all applicable DYNACORD
loudspeaker components – make the DSP 600 the
ideal manager even for complex, modern, high-quality
audio systems.