FG-1625/1625T, Data Sheet - Intella-Home Inc.

FG-1625/1625TGlassbreak DetectorThe new FG-1625 Glassbreak Detector uses the latest technology to provide faster response and increased falsealarm immunity. The FG-1625 is specifically designed to allow fast, easy installation, while the adjustable sensitivitysettings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701Glassbreak Simulator.FEATURES• FlexCore Signal ProcessorThe FlexCore Signal Processor isan Application-SpecificIntegrated Circuit (ASIC), whichprocesses sound data in parallelrather than sequentially for faster,more accurate detectiondecisions. The combination ofproven FlexGuard® performancewith the speed of FlexCoreprocessing provides unmatchedfalse alarm immunity withoutcompromising detection.• Easy Installation and SetupIntelliSense’s patented technologyallows remote activation of TestMode (with simulator). The FG-1625 has a centered wire entryhole, 45° terminal blocks, andEOL terminals. A hand-clapfeature verifies that the detector isfunctioning.• Selectable SensitivityTwo dip switches on the FG-1625make it easy to set the sensitivityto match the acoustics of theroom. Four different sensitivitylevels are available, ranging fromvery low to high. The range canthen be verified remotely with theFlexGuard FG-701 GlassbreakSimulator.• Mount the Detector AnywhereMounts on any wall, in thewindow frame, or on the ceiling,with no minimum range and amaximum range of 25’ (7.6 m) tothe glass.• Covers All Glass TypesThe FG-1625 works on all glasstypes, including plate, tempered,laminated, wired, film-coated, andsealed insulating glass.• Multiple Domain SignalAnalysisThe FG-1625 performs MultipleDomain Signal Analysis in whichtime, frequency and amplitudecharacteristics are evaluated forsignal qualification. This enablesthe detector to accuratelydiscriminate false alarms fromtrue glassbreak events.• Enclosed PC BoardThe PCB is protected frompotential damage duringinstallation.• Patented Remote Test ModeThe Patented Remote Test Modecan enabled or disable theindicator LEDs using the FG-701Glassbreak Simulator. The unitautomatically resets from TestMode in five minutes.• Mounting LocationsThe FG-1625 can be mounted onthe ceiling, opposite wall,adjoining wall, or the same wallas the glass.

FG-1625/1625TGlassbreak DetectorSPECIFICATIONSPhysical Dimensions• White high impact ABS plastichousing• 3 7/8” H x 2 2/5” W x 7/8” D(98 mm x 62 mm x 21.8 mm)Weight• Product Only: 3.2 oz (90g)• Pkgd Product: 4.1 oz (116g)Range• 25’ (7.6 m) maximum,omnidirectional. Range isadjustable; no minimum rangeAlarm Relay• FG-1625: Form A, 125mA max,25VDC max• FG-1625T: Form C, 125mA max,25VDC maxTamper Switch (FG-1625T only)• Combination cover/wall tamper25mA max, 24VDC maxAlarm Duration• Five seconds (unaffected byalarm LED latching)ESD Immunity• 10kV discharges of either polarityto exposed surfacesPower Requirements• 6 - 18VDC, 12mA typical at12VDC; 22mA max (Latched LED)• AC ripple: 4V peak-to-peak atnominal 12VDCRFI Immunity• 30V/m, 10MHz - 1000MHzOperating Temperature• 14° to 122° F (-10° to 50° C)• Storage: -4° to 122° F (-20° to 50° C)Approvals and Listings• FCC and IC verified• CE• C-Tick• UL Listed• ULC ListedGlass Type/ThicknessType* Minimum MaximumPlate 3a 2.4 mm (3/32”) 10 mm (3/8”)Tempered 3 mm (1/8”) 10 mm (3/8”)Laminated 3 mm (1/8”) 14 mm (9/16”)Wired 6 mm (1/4”) 6 mm (1/4”)Coated 2,3b 3 mm (1/8”) 6.4 mm (1/4”)Sealed 3 mm (1/8”) 6 mm (1/4”)Insulating 1,3b (Maximum overall 7/16”)* Minimum size for all types is 28 cm (11”)square; glass must be framed in the wall ormounted in a barrier at least 0.9 m (36”) wide.1 Protected only if both plates of the unit arebroken.2 Coated glass with security films, includingfilms for solar protection, up to 12 mil. thickmay be used. Film TechnologiesInternational, Inc.’s GLASS-GARD® GGLL1200 has been evaluated with this product byUnderwriters Laboratories, Inc. at the requestof IntelliSense.3 In compliance with Underwriters Laboratoriesof Canada’s Standard for Intrusion DetectionUnits (CAN/ULC-S306-M89):a. Plate glass 3mm to 10mm can be used.b. ULC recognizes a maximum range forprotecting sealed insulated glass andcoated glass of 12.5 ft. (3.8 m).Note: The FG-1625/1625T detectsshattering of framed glass by directimpact. It may not consistentlydetect breakage by blows that onlycrack the glass, by high velocityprojectiles such as bullets, or glassbroken without an impact.Accessories Description• FG-701 P/N 0-000-701-0Glassbreak SimulatorFlexGuard ® GlassbreakSimulator/Tester• The sound of breaking glass isdigitally simulated by the FG-701.The FG-701 is compatible fortesting all IntelliSense glassbreakdetectors. IntelliSense highlyrecommends testing glassbreakdetectors before final installation.ORDERINGFG-1625 Glassbreak DetectorFG-1625T Glassbreak Detector with TamperHoneywell Security GroupIntelliSense1230 S. Hurstbourne Pkwy., Suite 100Louisville, KY 40222www.getintellisense.comCopyright ©2003 Honeywell International Inc. L/FG1625/D 9/03