to download this PDF

All-In-One Gas Purification System• One cartridge removes oxygen, water and non-methane hydrocarbons from He, H 2 , N 2and inert gas• Maximum purification in a minimum space• Wall-mount and bench-mount hardware included• Regenerable; saves time and moneyThe All-In-One Gas Purification System removes trace level contaminants in a singlecartridgesystem. The system removes oxygen and water to better than research gradelevels (< 0.2 ppm). The single cartridge format offers low operating costs and is easilyreplaced. The purifier consists of a manifold head and multi-sorbent cartridge for efficientremoval of water, oxygen, sulfur compounds and hydrocarbons. It is shipped fully activatedand filled with high-purity helium. Available with either 1/8” or 1/4” fittings. Regenerationservice is available. Dimensions are 12 cm x 31 cm x 8 cm. Weight is 1.3 kg. Replacementcartridge weighs 0.6 kg.Wall MountBench MountConstructionThe all-welded stainless steel cartridge contains a multiple-layer adsorbent bed to sequentiallyremove contaminants to trace levels. The system comes ready to wall mount, but may be benchmounted by removing the bracket and attaching to a bench mount base which is included.Warning: Becomes hot when exposed to air, use only with inert, non-oxidizing gases!DescriptionItem No.All-In-One Gas Purification System, 1/8” fittings 202890All-In-One Gas Purification System, 1/4” fittings 202892Replacement Cartridge, All-In-One Purifier 202839Regeneration Service, All-In-One Cartridge 202879www.chromres.com 25