PKZIP/SecureZIP v9.0 Message and Codes Guide - PKWare

AQZ0162-40Explanation:Error Occurred while copying SFX file &1 to archive file.SELFXTRACT was coded to build an archive with a self extracting preamble. Whiletrying to copy SFX file &1 to the archive, an error occurred. See previous detail joblog for more details on the failure. Contact the Product Services Division at 1-937-847-2687 for assistance.AQZ0163-00Explanation:Self Extracting code was added to archive with &2 bytesSELFXTRACT(&1) was coded to build an archive with a self extracting preamble.This is informational only on the addition of the preamble &1 to the archive.AQZ0164-00Explanation:Removing &1 bytes preamble code from Archive File &2.SELFXTRACT(*REMOVE) was coded to remove the self extracting preamble fromthe archive. This is informational only on the removal of the preamble.AQZ0165-00Explanation:File &1 exceeds 4 Gig and PKZIP is not running with GZIP(*YES).File bypassed.PKZIP is trying to compress file &1 in a standard archive (parameter GZIP is *NO)and the sizes exceed 4 gigabytes. Use GZIP(YES) to compress.AQZ0166-40Explanation:Self Extraction Creation cannot be performed with Encryption.SELFXTRACT was coded to create a self extracting archive with advancedencryption. Advanced encryption is not supported with self extracting archives.AQZ0167-40Explanation:Self Extraction Creation cannot be performed with Large FileSupport.SELFXTRACT was coded to create a self extracting archive and it was determinedthat ZIP64 format will be required for large file support. ZIP64 large file support is notprovided for self extracting archives.AQZ0168-40Explanation:Self Extraction preamble &1 is not supported.SELFXTRACT was coded to create a self extracting archive with &1. It is notavailable on your current environment. The job will be terminated. Contact theProduct Services Division at 1-937-847-2687 for assistance.22