PEC 2010_Umschlag_engl - Palfinger

ManipulatorsA hydraulically operated attachment used for positioning tubes or poles.It is flanged on the boom extension of the crane.Kinshofer• Mobility through three hydraulic functions such as gripping, turning and tilting(three hydraulic circuits are necessary). Unlimited angle of rotation• Heavy loads of 500 kg up to 3000 kg can be handled by the manipulators• Precise positioning guaranteed by the rotator equipped with mechanicallyoperating, hydraulic pilot controlled brake for the rotary motion,to prevent unintentional rotationManipulators PZMLoad capacity Gripping Ø Width Number of Self weight Closing(min./max.) B tines forceType (kg) (mm) (mm) (kg) (kN)PZM0500 500 100 / 300 785 1 235 11PZM1000 1000 100 / 300 1275 2 310 23PZM2000 2000 250 / 600 1365 4 865 25PZM3000 3000 250 / 600 1630 6 1085 39Package consists of: manipulator, rotator, hydraulic pilot controlled brake, non-return valvePlease note:• Tubes or poles always have to be grabbed in the centre of gravity• Special manipulators with different gripper attachments and an additional motion axis available upon requestAccessoriesTypePZMMVDescriptionsolenoid valve adds-on an oil circuit to change over to 3 circuits (for gripping, turning, tilting), when only 2 circuits areavailable (incl. hose guard) – 12 V / 24 V, working pressure max. 25 MPa, oil flow 60 l/min.Requirements of truck craneOperating pressure:20 MPa (200 bar)Pump capacity:20 to 40 l/minTechnical drawingsBBBBPZM0500 PZM1000 PZM2000 PZM300035