Lounge Chairs - Knoll

Table of Contents
KnollStudio
Introduction Designer Index 3
Visual Index 5
Using the KnollStudio Price List 18
Spinneybeck Leather Grades 19
Upholstery Notes 20
f California Technical Bulletin 133 21
Knoll and Sustainable Design 23
GREENGUARD Certified KnollStudio Products 24
KnollStudio Finish Code Chart: Compatibility with Knoll Office Systems 25
Materials and Finishes 26
Product Maintenance 27
KnollStudio 20-Day Program 29
KnollStudio 20-Day Program Upholstery Scope 29
Items Available on KnollStudio 20-Day Program 30
Placing Your KnollStudio Order 32
Side Chairs and Lounge Seating Amat-3 : Twist Barstool 34
Harry Bertoia : Side Chair 36
Harry Bertoia : Barstools 38
Harry Bertoia : Diamond Lounge Seating 42
Harry Bertoia : Bird Lounge Chair and Ottoman 44
Harry Bertoia : Asymmetric Chaise 46
Harry Bertoia : Bench 48
Cini Boeri : Lounge Collection 50
Marcel Breuer : Cesca Chair 52
Marcel Breuer : Wassily Chair 54
Don Chadwick : Spark Series 56
Pepe Cortés : Jamaica Barstool 58
Jonathan Crinion : Crinion Chair 60
Joseph Paul D’Urso : Contract Lounge Seating 62
Joseph Paul D’Urso : Residential Lounge Seating 64
Joseph Paul D’Urso : Swivel Lounge Seating 66
Raul de Armas : de Armas Chair 68
Raul de Armas : Vertical de Armas Chair 70
Frank Gehry : Side and Dining Chairs 72
Frank Gehry : Lounge Seating 74
Markus Jehs and Jürgen Laub : Jehs+Laub Lounge Collection, pedestal base 76
Markus Jehs and Jürgen Laub : Jehs+Laub Lounge Collection, wire base 78
Florence Knoll : Lounge Seating 80
Antti Kotilainen : CHIP Chair and Barstool 82
Maya Lin : Stones 84
Piero Lissoni : Divina� Lounge Seating 86
Ross Lovegrove : Sprite Armless Chair 88
Ross Lovegrove : Sprite Arm Chair 90
Vico Magistretti : Cirene Stacking Chair 92
Marco Maran : Gigi� Arm and Armless Chair 94
Marco Maran : Gigi� Barstool and Swivel Chair 96
Marco Maran : X3 Chair and Barstool 98
Ludwig Mies van der Rohe : Tubular Brno Chair 100
Ludwig Mies van der Rohe : Flat Bar Brno Chair 102
Ludwig Mies van der Rohe : Four Seasons Stool 104
Ludwig Mies van der Rohe : MR Lounge Seating 106
Ludwig Mies van der Rohe : MR Chair 108
Ludwig Mies van der Rohe : Barcelona� Lounge Seating 110
Ludwig Mies van der Rohe : Krefeld Collection 112
George Nakashima : Straight Chair 116
Jorge Pensi : Toledo Stacking Chair 118
Charles Pfister : Petite Lounge Seating 120
Copyright � 2010 Knoll, Inc.
All rights reserved.
All prices effective 2/15/2010.
1
PLKS0210

Side Chairs and Lounge Seating
(cont’d.)
KnollStudio
Charles Pfister : Lounge Seating 122
Charles Pfister : Sofa System 124
Warren Platner : Seating Collection 126
Charles Pollock : Executive Conference Arm and Armless Chairs 128
Joe Ricchio : Joe Chair 130
Joe and Linda Ricchio : JR� and Ricchio Chair with Upholstered Seat 132
Joe and Linda Ricchio : Fully Upholstered Ricchio and JR� Chairs 134
Joe and Linda Ricchio : Ricchio Barstool 136
Jens Risom : Side Chairs and Stool 138
Jens Risom : Child’s Side Chairs and Stool 140
Jens Risom : Lounge Chairs 142
Eero Saarinen : Tulip Chairs 144
Eero Saarinen : Executive Arm Chairs 146
Eero Saarinen : Executive Armless Chairs 148
Eero Saarinen : Womb Chair and Ottoman 150
Shelton Mindel : Shelton Mindel Side Chair 152
Shelton Mindel : SM1 Lounge Collection 154
Shelton Mindel : SM2 Lounge Collection 156
Stamberg Aferiat : Salsa� Lounge Seating 158
Stamberg Aferiat : Salsa� Lounge Seating Shelf and Side Cushion Options 160
Stamberg Aferiat : Salsa� Lounge Seating Specification Form 162
Kazuhide Takahama : Suzanne Lounge Seating 164
Ufficio Tecnico : Spoleto Chair 166
Vignelli Associates : Handkerchief Armless Chair 168
Vignelli Associates : Handkerchief Arm Chair 170
KnollStudio : Throw Pillows 172
Tables/Executive Office Franco Albini : Albini Desk 174
Marcel Breuer : Laccio Tables 176
Joseph Paul D’Urso : Square Work and Low Tables 178
Joseph Paul D’Urso : Round Work and Low Tables 180
Joseph Paul D’Urso : Racetrack Work Tables 184
Frank Gehry : Face Off Cafe Table 186
Alexander Girard : Girard Table 188
Florence Knoll : Oval Table Desks 190
Florence Knoll : Round Table Desk 192
Florence Knoll : Credenzas 194
Florence Knoll : Coffee Tables 198
Florence Knoll : End Tables 200
Ross Lovegrove : Table Desks 202
Ross Lovegrove : Round Tables 204
Ross Lovegrove : Tri-Oval Tables 206
Ross Lovegrove : Credenzas and Mobile Pedestal 208
Ludwig Mies van der Rohe : Barcelona� Table, MR Table 210
Ludwig Mies van der Rohe : Krefeld Side and Coffee Table 212
Pascal Mourgue : Square and Rectangular Conference Tables 214
Pascal Mourgue : Round and Racetrack Conference Tables 216
Pascal Mourgue : Bullet Conference Tables 218
George Nakashima : Splay-Leg Table and Tray 220
Isamu Noguchi : Cyclone Dining and Side Tables 222
Jorge Pensi : Pensi Tables 224
Piiroinen : Arena Cafe Tables 228
Warren Platner : Dining and Side Tables 230
Warren Platner : Coffee Tables 232
Jens Risom : Dining and Side Tables 234
Jens Risom : Child’s Amoeba Table 236
Eero Saarinen : Round Dining Tables 238
Eero Saarinen : Oval Dining Tables 242
Eero Saarinen : Round End and Coffee Tables 244
Eero Saarinen : Oval End and Coffee Tables 248
Shelton Mindel : SM Tables 250
Vignelli Associates : PaperClip Cafe Tables 252
2

KnollStudio
Propeller Collection Emanuela Frattini : Propeller� Training Table Series 254
Emanuela Frattini : Propeller� Column Base Tables 276
Emanuela Frattini : Propeller� Conference Table Series 278
Emanuela Frattini : Propeller� Accessories 326
Emanuela Frattini : Propeller� Electrical 344
Alpha-Numeric Index 398
Selling Policy 404
General Ordering Information 406
3

Designer Index
KnollStudio
Franco Albini .....................................................................................174-175
Amat-3 ............................................................................................34-35
Harry Bertoia .......................................................................................36-49
Cini Boeri ..........................................................................................50-51
Marcel Breuer ...............................................................................52-55, 176-177
Don Chadwick ......................................................................................56-57
Pepe Cortés.........................................................................................58-59
Jonathan Crinion. ....................................................................................60-61
Raul de Armas ......................................................................................68-71
Joseph Paul D’Urso ...........................................................................62-67, 178-185
Emanuela Frattini ...................................................256-277, 280-303, 306-343, 346-355, 360-367
Frank Gehry ................................................................................72-75, 186-187
Alexander Girard ..................................................................................188-189
Markus Jehs and Jürgen Laub. ..........................................................................76-79
Florence Knoll. ..............................................................................80-81, 190-201
Antti Kotilainen .....................................................................................82-83
Maya Lin. ..........................................................................................84-85
Piero Lissoni. .......................................................................................86-87
Ross Lovegrove ..............................................................................88-91, 202-209
Vico Magistretti .....................................................................................92-93
Marco Maran. .......................................................................................94-99
Ludwig Mies van der Rohe ...................................................................100-115, 210-213
Pascal Mourgue ...................................................................................214-219
George Nakashima. .........................................................................116-117, 220-221
Isamu Noguchi ....................................................................................222-223
Jorge Pensi ...............................................................................118-119, 224-227
Charles Pfister ....................................................................................120-125
Piiroinen. ........................................................................................228-229
Warren Platner. ............................................................................126-127, 230-233
Charles Pollock. ...................................................................................128-129
Joseph Ricchio ....................................................................................130-137
Linda Ricchio .....................................................................................132-137
Jens Risom ...............................................................................138-143, 234-237
Eero Saarinen .............................................................................144-151, 238-249
Peter Shelton & Lee Mindel. ..................................................................152-157, 250-251
Peter Stamberg & Paul Aferiat ........................................................................158-161
Kazuhide Takahama ................................................................................164-165
Ufficio Tecnico ....................................................................................166-167
Vignelli Associates. ....................................................................................168
Vignelli Associates: David Law, Lella Vignelli & Massimo Vignelli ............................................252-253
4

Visual Index
Page SIDE CHAIRS AND LOUNGE SEATING
34 AMAT-3 Twist Barstools
36
|
45
BERTOIA Side chair Barstools Diamond chair Child’s Diamond chair
Large Diamond chair Bird high back chair Ottoman Bench
Asymmetric Lounge
50 BOERI Lounge chair Sofa
52
|
55
Ottoman Large pillow Small pillow
BREUER Cesca chair Cesca chair, cane Wassily chair
56 CHADWICK Spark side chair Spark lounge chair
58 CORTÉS Jamaica Barstools Jamaica low stool
60
|
61
CRINION Crinion arm chair Crinion armless chair
5
KnollStudio

Visual Index
Page SIDE CHAIR AND LOUNGE SEATING, continued
62
|
65
D’URSO Contract Lounge chair Small Sofa Ottoman
66 D’URSO Swivel Lounge chair
68
|
71
72
|
75
76
|
79
Residential Lounge chair Sofa Ottoman
DE ARMAS de Armas arm chairs de Armas armless chairs
Vertical de Armas arm chairs Vertical de Armas armless chairs
GEHRY Hat Trick arm chair Hat Trick armless chair High Sticking chair Cross Check chair
Power Play chair Offside ottoman
JEHS+LAUB Lounge chair, pedestal base Ottoman, pedestal base
Lounge chair, wire base Ottoman, wire base
80 KNOLL Lounge chair Settee Sofa
Two seater bench Three seater bench
6
KnollStudio

Visual Index
Page SIDE CHAIR AND LOUNGE SEATING, continued
82 KOTILAINEN CHIP armless chair CHIP arm chair CHIP barstools Dolly
Ganging mechanism
84 LIN Adult stones Child stones Stones Coffee table
86 LISSONI Divina Lounge chair Petite Lounge chair Settee Sofa
Ottoman
88 LOVEGROVE Sprite armless chair Sprite arm chair Sprite Dolly
92 MAGISTRETTI Cirene arm stacking chair Cirene armless stacking chair Cirene Dolly
98 MARAN Gigi armless chair Gigi arm chair Gigi Barstools Gigi Swivel chair
100
|
109
MIES
VAN DER ROHE
X3 Stacking chair X3 Barstools
Tubular Brno chair Flat Bar Brno chair Four Seasons stool
MR Chaise lounge MR adjustable chaise lounge MR arm lounge chair MR armless lounge chair
MR arm chair MR armless chair
7
KnollStudio

Visual Index
Page SIDE CHAIRS AND LOUNGE SEATING, continued
110
|
115
MIES
VAN DER ROHE
Barcelona chair Child’s Barcelona chair Barcelona stool Child’s Barcelona stool
Barcelona stool
with cowhide sling
116 NAKASHIMA Straight chair
Barcelona couch
Krefeld Lounge chair Krefeld Settee Krefeld Sofa
Krefeld medium and large benches Ottoman
118 PENSI Toledo chair Toledo chair seat cushion
120
|
125
PFISTER Petite Lounge chair Petite Lounge chair
with tablet arm
Petite Settee Petite Sofa
Petite Ottoman Lounge chair Settee Sofa
Ottoman Modular Sofa System
Center module
126 PLATNER Lounge chair Arm chair Stool
128 POLLOCK Executive Conference arm chair Executive Conference armless chair
8
End modules Corner module
KnollStudio

Visual Index
Page SIDE CHAIRS AND LOUNGE SEATING, continued
130
|
137
RICCHIO Joe arm chair JR chair Ricchio arm chair Ricchio armless chair
Ricchio Fully upholstered chair JR Fully upholstered chair Ricchio barstools
138 RISOM Lounge chairs Side chairs
Sitting stool Child’s Side chairs Child’s Sitting stool
144 SAARINEN Tulip arm chair Tulip armless chair Stool
146
|
149
SAARINEN Executive arm chair Executive armless chair Arm chair Armless chair
150 SAARINEN Womb chair Ottoman Medium Womb chair Medium Ottoman
152
|
157
SHELTON &
MINDEL
Child’s Womb chair
SM side chair SM side chair, fully upholstered
SM1 Lounge chair SM1 Settee SM1 Sofa
SM2 Lounge chair SM2 Settee SM2 Sofa
9
KnollStudio

Visual Index
Page SIDE CHAIRS AND LOUNGE SEATING, continued
158
|
163
STAMBERG
AFERIAT
Salsa Lounge chair Salsa Settee
Salsa Sofa Salsa Shelves
164 TAKAHAMA Suzanne lounge chair Double lounge chair Settee Sofa
166 TECHNICO Spoleto chair
168
|
171
VIGNELLI
ASSOCIATES
Handkerchief arm chair Handkerchief armless chair
172 KNOLLSTUDIO Lumbar pillow Throw pillow Large throw pillow
10
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE
174 ALBINI Pedestal desk
176 BREUER Laccio tables
178
|
185
D’URSO Work and low tables - Square Work and low tables - Round Work tables - Racetrack
186 GEHRY Face Off café tables
188 GIRARD Girard table
190
|
197
KNOLL Oval and Round table desks Two Position Credenza Four Position Credenza
198 KNOLL Coffee and end tables
202
|
209
LOVEGROVE Rectangular tables Round tables Tri-Oval tables
210 MIES
VAN DER ROHE
Credenzas Mobile Pedestal
Barcelona table MR table Krefeld side table Krefeld coffee table
11
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
214
|
219
MOURGUE Pascal square table Pascal rectangular table Pascal round table Pascal racetrack table
Pascal bullet table
220 NAKASHIMA Splay-leg table Tray
222 NOGUCHI Cyclone dining table Cyclone side table
224
|
227
PENSI Pensi tables Pensi high table
228 PIIROINEN Arena tables Arena high tables
230 PLATNER Dining table Side table Coffee tables
234 RISOM Dining table Side tables Amoeba coffee table Child’s Amoeba coffee table
238
|
249
SAARINEN Dining tables Side tables Coffee tables
250 SHELTON &
MINDEL
252
|
253
VIGNELLI
ASSOCIATES
SM side table SM small coffee table SM large coffee table SM square coffee table
PaperClip tables
12
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
256 FRATTINI Propeller training trapezoid tables, bridges and segments
258 Propeller training rectangular, square and bullet tables
260 Propeller training rectangular and bullet desks, returns and end tables
262 Propeller training semi-circular tables, bridge tops and segments
264 Propeller training rectangular and bullet tables with C-legs/T-legs
266 Propeller training returns with C-legs and T-legs
268 Propeller training flip-top tables with C-legs and T-legs
270 Propeller training adjustable height tables
272 Propeller training rectangular folding tables and dolly
274 Propeller standing height tables and shelves
13
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
276 FRATTINI Propeller training column base tables
280 Propeller conference round and rounded tables with standard legs
282 Propeller conference rounded table with T-legs
284 Propeller conference bullet table with standard legs
286 Propeller conference bullet table with T-legs
288 Propeller conference square and rectangular conference tables with standard legs
290 Propeller conference rectangular table with T-legs
292
|
303
Propeller conference segmented rounded and rectangular tables
306 Propeller conference tables with drum base
14
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
308
|
313
FRATTINI Propeller segmented conference tables with drum base
314 Propeller conference tables with peanut base
316
|
325
326
|
329
Propeller segmented conference tables with peanut base
Propeller accessories - fabric and tackable modesty and privacy screens
330 Propeller accessories - attachment clamps for modesty and privacy screens
332 Propeller accessories - tackable modesty screens for flip-top tables
334 Propeller accessories - shelves
336 Propeller accessories - rolling cart and easel
15
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
338 FRATTINI Propeller accessories - credenzas and sideboards
340 Propeller accessories - replacement parts
342 Propeller accessories - Peanut and Drum base conference tables
346 Propeller electrical - Plexus boxes with cordset
350 Propeller electrical - Empty Plexus boxes
352 Propeller electrical - Pre-wired Plexus boxes
354 Propeller electrical - Quadruplex, and wire management
356 Propeller electrical - Sequence, duplex receptacle
360 Propeller electrical - 2+2 Raceway components
16
KnollStudio

Visual Index
Page TABLES / EXECUTIVE OFFICE, continued
362 FRATTINI Propeller electrical - Jumper and infeed cables
364 Propeller electrical - Leg options for Prewired Plexus boxes
366 Propeller electrical - Leg options for Empty Plexus boxes
368
|
393
Propeller electrical - Plexus Communication and Data Faceplates
17
KnollStudio

Using the KnollStudio Price List
A Price List Overview
Where do I send my order? How
should I maintain my marble table?
From textile options to wood
polishes, the KnollStudio price list is
designed to provide you with
everything you need to know in order
to understand, specify, and care for
furniture in the KnollStudio
Collection.
This book is divided into three
easy-to-use sections.
• Side Chairs and Lounge Seating
• Tables and Executive Office
• Propeller Table Series
For a quick overview of the
collection’s scope, review the Visual
Index on pages 5-17. If you’re
looking for pieces by a specific
designer, try the Designer Index on
page 4.
Need furniture in a hurry?
KnollStudio 20-day on pages 29-30
highlights KnollStudio pieces
available in only twenty days.
Leathers, Textiles, and Finishes
If you’re confused about which
leather to select, pages 19-20
explains the broad selection of
Spinneybeck leathers available
for KnollStudio furniture.
Additional upholstery notes and
Customer’s Own Material (COM)
information are available on page 20.
For detailed explanations of the
many materials used in constructing
KnollStudio furniture,
consult page 26. A cross-reference of
KnollStudio veneer or lumber
finishes with standard Knoll Office
veneers is provided on page 25.
Easy-care maintenance information
is also provided on pages 27-28.
Placing Your KnollStudio Order
For information about where to send
your order and key terms and
conditions, see page 32.
The complete Knoll Selling Policy is
available on pages 404-405.
General Ordering Information and
Knoll’s Sustainability Statement is
available on page 406
18
Product Information On Each Page
On each page, the following features
will assist you:
Description provides both the pattern
number and a basic description of
the product.
Dimensions provide the overall space
the product will require. Statistics
are based on the maximum width,
depth, and
height of the product.
Weight is based on the product itself.
It does not include packaging.
Weights are rounded to the nearest
pound.
Weights of upholstered items do not
include weight of textile/leather. To
calculate total weight, multiply
covering requirements by
textile/leather weight, and add to
product weight.
Pattern Number provides both the
product identification number and
all additional selections required for
ordering. Finish options are enclosed
in parentheses. Finish suffix
descriptions are found under
Finishes on the bottom portion of the
page.
Order Code/Ordering Information
outlines exactly how to specify
KnollStudio product and the full
scope of finishes and other options.
The Order Code provides an example
of how one pattern number on the
page is specified.
20-Day pieces available in 20
days ex-factory are noted with
helicopters next to the items.
Additional information is provided
under Ordering Information and in
the 20-Day section of this book.
Construction provides specific
materials and finishes employed, as
well as specific construction details.
Textiles and Leather Grades list by
price group all KnollTextiles and
Spinneybeck Leathers approved for
each seating piece. This list is
derived through careful examination
of the textile or leather’s distinctive
upholstery characteristics and the
form and structure of each piece of
furniture. KnollTextiles or
KnollStudio
Spinneybeck leathers that are not
listed have been rejected because
Knoll cannot ensure their
performance on that product. To view
the full range of colorways available
for each fabric or leather, consult any
Knoll or Spinneybeck representative.
Cal 133 Technical Bulletin
Many KnollStudio products meet
California Technical Bulletin 133.
Information for specifying these
items is on page 21. Items available
are indicated with a flame f.
Applicable upcharge will be listed
on the respective price list page.
Greenguard
Many KnollStudio products meet
Greenguard environmental
standards. Please see page 24 for a
complete listing of products.
CPSIA Testing
Many knoll kids products meet the
consumer Product Safety
Improvement Act of 2008 for
Children’s Products, 16 C.F.R. 1303
CPSIA Title 1 Section 101 for Total
Lead in Substrates and Surface
Coatings. For a complete listing of
approved products, please refer to
individual price list pages.
For More Information
For more information, contact
your KnollStudio representative,
a Knoll Space reailer or e-tailer, or
telephone Customer Services at
800 343-KNOLL. To find the retailer
or showroom nearest you, visit
www.knoll.com.

For the ultimate in comfort, durability,
and prestige, many KnollStudio
products can be upholstered in
Spinneybeck leathers.
Spinneybeck leathers are made from
the top 2% of the world’s finest hides,
inspected numerous times during
production to ensure evenness of grain,
surface, color and
the absence of scars.
After tanning, all Spinneybeck leathers
are drum-dyed, a time-consuming
procedure which ensures color
penetration throughout the hide. Each
hide is then finished in the manner
which will best bring
out its individual character.
Spinneybeck leathers are all full-grain
aniline drum-dyed products imported
from Italy.
The following Spinneybeck leathers are
approved for application on
KnollStudio products. Leathers are
grouped into five price categories
referred to as ‘‘grades.’’ The selection of
approved leathers varies by product.
Please refer to the pricing page of each
product line for more information.
Square footage requirements for
Customer’s Own Leather (COL) are
listed on the left side of the pricing
page. Please refer to Upholstery Notes
on page 20 and The Knoll Selling
Policy on pages 404-405 for further
information regarding COL.
For further information call
Spinneybeck at 1-800-482-7777.
Spinneybeck Leather Grades
Grades Characteristics
U
Vicenza Heavily finished cowhide, corrected grain, slightly raised grain texture; 26 colorways.
Volo Heavily finished cowhide, corrected grain, slightly raised grain texture; 56 colorways.
V
Acqua Heavy water-repellent finished kip, corrected grain, slightly raised grain texture; 66 colorways.
Andes Slightly pronounced grain cowhide with a medium finish, and enhanced grain; 59 colorways.
España Smooth, tight grain cowhide; breathable, protective medium finish, enhanced grain; 75 colorways.
Hand Tipped Two-toned leather, lightly finished cowhide, pronounced pebble grain texture; 34 colorways.
Maremma Full grain textured suede with impregnated soil-resistant treatment; 17 colorways.
Montalcino Heavily finished cowhide, smooth grain; 50 colorways.
Velluto Pelle Slightly pronounced grain cowhide with a medium finish, enhanced grain; 99 colorways.
W
Alaska Pearlized-iridescent protective finish cowhide, full grain with smooth texture; 52 colorways.
Amazon Mid-weight, full grain cowhide; colors of the Amazonian jungle, raised grain texture; 22 colorways.
Antique Smooth tight grain cowhide, lightly antiqued to produce an elegant patina, enhanced grain;
7 colorways.
Arizona Full grain, lightly finished kip; ironed for tight, smooth texture, glove-like hand; 42 colorways.
Derby Combination-tanned cowhide; full grain, medium finish and raised grain texture; 26 colorways.
Forte High performance, full grain leather with slightly pronounced grain texture. 81 colorways.
Lucente Smooth, very tight grain cowhide; subtle sheen; light casein finish; 17 colorways.
Sabrina Smooth, tight and full grain kip with a breathable protective finish; 114 colorways.
X
Ducale Embossed shrunken grain cowhide, medium protective finish, full grain; 13 colorways.
Ducale Full grain-sueded cowhide, embossed shrunken grain, scotch-guarded; 36 colorways.
Velour
KnollStudio
Y
Capri Chrome-free, light protective finish, full grain cowhide; 10 colorways.
Cervo Full aniline, pronounced grain texture, soft luxurious hand; 13 colorways.
Copenhagen Full aniline, 100% vegetable tanned leather, full grain; 14 colorways.
Cordovan Aniline-dyed cowhide, light waxy finish, supple hand, full grain; 18 colorways.
Distressed Aniline-dyed, paraffin wax final ironing process with a smooth finish, and full grain; 4 colorways.
Marissa Grain-sueded cowhide, scotch-guarded smooth suede grain; 19 colorways.
Portofino Full grain, lightly finished cowhide, with a pronounced raised texture; 21 colorways.
Prima Full aniline, special oils provide a very elegant and supple hand; 8 colorways.
Riva Slightly pronounced grain texture, water-repellent, full grain; 16 colorways.
Saddle Full aniline, smooth very tight grain surface takes on a rich patina over time; 23 colorways.
Salon Full aniline cowhide, ironing process provides a lustrous sheen of traditional leathers; 8 colorways.
19

Textile and Leather Notes
All seating in this price list includes
the cost of applied fabric or leather.
To simplify ordering, the seating is
arranged into specific upholstery
grades and priced accordingly.
Samples and prices of cut textiles are
available on request. For a full list of
the Spinneybeck leathers available,
see page 19.
Leather
The Natural Qualities of Leather
Natural leather is unique. Because
every animal is different, each hide
has its own individual color, texture,
and life-marks. In fact, our leathers
are painstakingly treated to retain
their natural appearance and hand.
Range marks are not camouflaged.
Colors and texture vary, and will do
so more with age as the leather
mellows and takes on a rich patina.
Spinneybeck Leathers
Spinneybeck offers full-grain Italian
leathers.
Spinneybeck features three different
tanning processes which preserve the
leather. The first is mineral tannage,
in which chromium salts are used;
the second is vegetable tannage, in
which bark tanning is used; and the
third is a combination of the first two
processes. Each leather is tanned in
the manner which will best
accentuate its unique characteristics.
Spinneybeck leathers are drum-dyed
which tumbles the leather over and
over for smooth, even coloring
absorbed directly into the leather.
This aniline-dying process enhances
the natural qualities of leather grain.
Many competitors use vat-dying.
This does not dye the leather in an
even manner.
If you have further questions on
Spinneybeck leathers, contact your
Knoll representative or telephone
Spinneybeck Customer Service at
1-800 482-7777.
Below are additional details on the
three major types of Spinneybeck
leathers.
Naked Leather (Capri, Copenhagen,
Cordovan, Distressed, Maremma,
Prima, Saddle) Naked leather
contains no foreign substances which
would affect the superbly soft,
mellow hand of this most luxurious of
upholstery leathers. Natural
markings are
Upholstery Notes
accentuated. Since there are
no barriers against spillage or
staining, naked leathers should be
carefully specified. However,
scratches and marks will dissipate in
time as the leather develops a
beautiful patina.
Leathers with Protective Finishes:
(Acqua, Alaska, Amazon, Andes,
Antique, Arizona, Derby, Ducale,
España, Forte, Hand Tipped, Lucente,
Montalcino, Portofino, Riva, Sabrina,
Salon, Velluto Pelle, Volo)
For high traffic areas, protective
finishes allow leather to be not only
practical, but easy to maintain.
Grain Sueded Leathers (Ducale
Velour, Marissa)
Full grain leathers that have been
lightly buffed to raise the nap of the
surface are referred to as ‘‘grain
sueded’’ leathers. This produces the
soft hand of sueded leathers. For
maximum soil resistance and
durability, these leathers have
received an impregnated soil
resistance treatment during the
drum-dye process which permeates
the leather, making it repellent to
liquid and dirt.
Knoll Upholstery Restrictions
Every Knoll leather and fabric is
exhaustively tested on each Knoll
upholstered item. This is done in
addition to the most extensive
program of independent fabric
testing in the industry. On furniture,
testing ensures precise fit and
appearance, without stretch,
puddling, telegraphing or other
common problems frequently
experienced when careful factory
pre-qualification is eliminated.
When Knoll suggests that a
particular leather or fabric not be
used on an object, this does not mean
the material is defective in any way;
it only implies less than perfect
performance with the form and
structure of a specific item on
furniture.
20
Instructions for Ordering Nano-Tex
As of 6/15/2007, the minimum for
Nano-Tex on KnollStudio orders is
40 yards. The Nano-Tex finish is
$2.50/yard. Additional leadtime
required.
Dealer instructions for ordering
Nano-Tex:
1) Visit knolltextiles.com/technical
documents and open the Nano-Tex
specifications to see if the fabric is
approved with the finish.
2) If approved, check the seating
matrix at knolltextiles.com to see if
the fabric alone is approved on the
chair. (If yes, proceed to #3).
3) Contact your account manager
with the fabric name, treatment
required, and name and pattern
number of desired chair. They will
see if Knoll has tested this fabric
with finish/treatment on said chair.
In most cases, application testing has
not been done and they will contact
the appropriate parties to initiate
approval and determine leadtime for
testing.
4) If approved, book order with a
suffix of N (for Nano-Tex) after the
fabric pattern number.
5) The fabric grade will remain the
same. Add line item for
finish/treatment required and
multiply the finish cost by the
number of yards required.
Customer’s Own Material (COM)
Customer’s Own Leather (COL)
While Knoll is pleased to cooperate
with COM/COL selections, an extra
charge is required to help offset
receiving and handling costs. Such
charges are included under the
COM/COL title of the price columns
in this price list. Prior to order
placement, a sample cutting of actual
COM/COL must be submitted to
Knoll in East Greenville or through
your regional Knoll office for
preliminary approval of intended
item (8� x8� minimum memo sample
if solid; if COM has a repeat, the
sample must be large enough to show
the repeat).
KnollStudio
Even after such preliminary
approval, Knoll reserves the right to
reject COM/COL, including, if
necessary, the item intended for use
with COM/COL, if Knoll considers
the customer-supplied material
inadequate for any reason. When
COM/COL is accepted, KnollStudio
assumes no responsibility for its
appearance, durability, color fastness
or any other quality after upholstered
on a Knoll product.
Published yardage requirements are
based upon Knoll 52� width material
unless specified otherwise. Leather
requirements are based on whole
hides with a minimum of 50 square
feet per hide. However, in some
cases, the nature or pattern of
COM/COL will require additional
yardage/square feet and/or additional
labor charges. When this is
necessary, the customer will be
notified at the same time that the
preliminary sample is approved.
If your COM/COL is approved, you
may send the required amount for the
product to:
Knoll, Inc.
1235 Water St
East Greenville, PA 18041
Attn: Customer Resources
COM/COL must be marked with
designated approval number and
customer’s name.
For additional information,
see Customer’s Own Material (COM)
under Selling Policy on pages
404-405.

Test Objective
California Technical Bulletin 133
(Cal 133) is a full-scale seating test,
not a component test. Testing must
be performed on the designated
seating unit and textile together.
Component data alone cannot be
used to certify compliance with the
regulation. Under Cal 133 you
cannot assume that seating or textiles
that have passed individually will
pass together.
Test Procedure
The seating unit is exposed to a
square open flame gas burner for 80
seconds, positioned at the center of
the seating unit, two inches from the
back and one inch from the seat.
f California Technical Bulletin 133
Scope
Cal 133 only applies to seating units.
The bulletin is designed for high risk
public areas:
Nursing homes
Health care facilities
Public auditoriums
Hotels (more than 10 seating units
in one room)
Motels (more than 10 seating units
in one room)
Jails and prisons
Tables and desks are not covered by
the bulletin. Variations may occur in
individual states with regards to
specific application. In California
only, compliance is at the discretion
of the fire marshall in any building
which is fully sprinklered.
KnollStudio Approvals
Tested seating units have been tested
in a worst case scenario thus
covering other fabrics of lighter
weight and same construction. When
specifying Cal 133, the seating unit
may be constructed with a fire
resistant foam and a fire blocker will
be laminated to the textile.
How To Specify
It is easy to specify Cal 133 on
KnollStudio seating. Simply add the
suffix ‘‘C’’ to the end of the pattern
number prior to the textile selection.
Approved textile selections must
have the suffix 133 added to the end
of the pattern number.
Example: Bertoia side chair, chrome,
seat pad in Common Ground/Basalt
420C-C-K-C-K448/12-133
KnollStudio
Testing Additional Product
If you would like to test a specific
product:
Specify chair and textile desired -
adding appropriate C and 133 codes
as explained.
Testing lead time will be the
standard lead time of the chair plus
4 - 6 weeks for testing procedure.
Test cost will be the regular price of
the chair plus $500 for the testing
procedures.
Cal 133 tested and approved fabrics
and seating units are indicated with a
flame f. All prices below are list.
KnollStudio CAL 133 Approved Products
Designer Product Pattern #
Unupholstered,
no upcharge
Knoll Textiles,
upcharge
Spinneybeck leather,
upcharge
Amat-3 Twist Barstool 31CK approved
Bertoia Side Chair, seat cushion 420K approved approved, no upcharge approved, no upcharge
Bertoia Barstools, Bar Height, seat cushion 427K approved approved, no upcharge approved, no upcharge
Bertoia Barstools, Counter Height, seat cushion 428K approved approved, no upcharge approved, no upcharge
Bertoia Diamond Lounge Chair 421K approved approved, no upcharge approved, no upcharge
Bertoia Diamond Lounge Chair 421F approved approved, no upcharge
Bertoia Child’s Diamond Lounge Chair 421LS-K approved, no upcharge approved, no upcharge
Bertoia Child’s Diamond Lounge Chair 421LS-U approved, no upcharge
Bertoia Large Diamond Chair 422F approved, no upcharge
Bertoia Bird Lounge Chair and Ottoman 423LU, 424YU approved, no upcharge
Bertoia Asymmetric Chaise 422F approved, no upcharge
Boeri Lounge Chair CB1 $512.00 $679.00
Boeri Sofa CB2 $700.00 $967.00
Boeri Ottoman CB3 $298.00 $543.00
Breuer Cesca Chair 50A, 50C $76.00
Breuer Wassily Chair 50L approved approved
Chadwick Spark Series
4-C-SD-S,
4-C-LG-S
$50.00
Cortes Jamaica Barstool 30C approved
Crinion Crinion Chair 58A, 58C $48.00
D’Urso Lounge Chair 2160, 2160R $510.00 $595.00
D’Urso Lounge Chair, split upholstery 2160S, 2160RS $775.00 $775.00
D’Urso Small Sofa 2161 $910.00 $995.00
D’Urso Small Sofa, split upholstery 2161S $1,195.00 $1,195.00
D’Urso Residential Sofa 2162R $1,110.00 $1,195.00
D’Urso Residential Sofa, split upholstery 2162RS $1,395.00 $1,395.00
D’Urso Ottoman 2163, 2163R $275.00 $365.00
D’Urso Ottoman, split upholstery 2163S, 2163RS
38A, 38AW,
$465.00 $465.00
de Armas de Armas Chair Collection
38C, 28CW,
41A, 41AW,
41C, 41CW
$48.00 $48.00
de Armas de Armas Chair Collection
38AW-U, 38CW-U,
41AW-U, 41CW-U
$86.00 $86.00
Knoll Lounge Chair 1205S1 $470.00 $554.00
Knoll Settee 1205S2 $820.00 $969.00
Knoll Sofa 1205S3 $1,097.00 $1,295.00
21

f California Technical Bulletin 133
KnollStudio
KnollStudio CAL 133 Approved Products (continued)
Designer Product Pattern #
Unupholstered,
no upcharge
Knoll Textiles,
upcharge
Spinneybeck leather,
upcharge
Knoll Small Bench 2530Y2C $109.00 $294.00
Knoll Large Bench 2530Y3C $169.00 $415.00
Kotilainen CHIP Chair 23C, 23A approved
Lissoni Divina Petite Lounge Chair 67S $317.00 $595.00
Lissoni Divina Standard Lounge Chair 67, 67R $509.00 $743.00
Lissoni Divina Settee 68, 68R $783.00 $1,177.00
Lissoni Divina Optional Side Cushion 68C $71.00
Lissoni Divina Sofa 69, 69R $1,175.00 $1,515.00
Lissoni Divina Ottoman 73, 73R $279.00 $509.00
Lovegrove Sprite Arm and Armless Chair 27C, 27A approved $48.00 $48.00
Mies van der Rohe Tubular Brno Chair 245AT, 245AB $517.00 $517.00
Mies van der Rohe Flat Bar Brno Chair 255AS, 255CS $517.00 $517.00
Mies van der Rohe Barcelona Lounge Chair 250LS, 250LC $422.00
Mies van der Rohe Child’s Barcelona Chair 250LC-S $371.00
Mies van der Rohe Barcelona Ottoman 251YS, 251YC $213.00
Mies van der Rohe Child’s Barcelona Ottoman 251YC-S $184.00
Mies van der Rohe Krefeld Lounge Chair 751 $451.00 $714.00
Mies van der Rohe Krefeld Settee 752 $556.00 $995.00
Mies van der Rohe Krefeld Sofa 753 $765.00 $1,368.00
Mies van der Rohe Krefeld Ottoman 754 $209.00 $373.00
Mies van der Rohe Krefeld Medium Bench 755 $348.00 $585.00
Mies van der Rohe Krefeld Large Bench 756 $382.00 $789.00
Pensi Toledo Stacking Chair 29C approved
Pfister
Standard Lounge Chair,
Petite Lounge Chair
1051C, 1051C-S $521.00 $785.00
Pfister Standard Settee 1052C $888.00 $1,359.00
Pfister Standard Sofa 1053C $1,256.00 $1,924.00
Pfister Corner Module 1050C-3 $494.00 $797.00
Pfister End Module, left panel and right panel 1050C-1, 1050C-2 $435.00 $681.00
Pfister Center Module 1050C $357.00 $562.00
Pfister Standard Ottoman 1059C $273.00 $376.00
Pollock
Executive/Conference Arm and
Armless Chairs
12A, 12C $89.00 $89.00
Ricchio Joe Chair 48A $48.00 $48.00
Ricchio Ricchio Chair 37A, 37C $48.00 $48.00
Ricchio JR Chair 44A $48.00 $48.00
Ricchio Fully Upholstered Ricchio Chair
37A-U, 37C-U,
44A-U
$136.00 $136.00
Ricchio Fully Upholstered Ricchio Chair 37A-UP $159.00 $159.00
Ricchio Ricchio Barstool 37CH, 37CM $48.00 $48.00
Saarinen Executive Arm Chairs 71A $217.00
Saarinen Executive Armless Chairs 72C $150.00
Saarinen Womb Chair 70L $527.00
Saarinen Medium Womb Chair 70LM $366.00
Saarinen Womb Ottoman 74Y $160.00
Saarinen Medium Womb Ottoman 74YM $125.00
Shelton Mindel Side Chair SM8A $48.00 $48.00
Shelton Mindel Side Chair Fully Upholstered SM8A-U $136.00 $136.00
Shelton Mindel SM1 Lounge Chair SM1-1 $450.00 $564.00
Shelton Mindel SM1 Settee SM1-2 $625.00 $805.00
Shelton Mindel SM1 Sofa SM1-3 $785.00 $1,066.00
Shelton Mindel SM2 Lounge Chair SM2-1 $576.00 $625.00
Shelton Mindel SM2 Lounge Chair- combination SM2S-1 $1,014.00 $1,014.00
Shelton Mindel SM2 Settee SM2-2 $920.00 $955.00
Shelton Mindel SM2 Settee- combination SM2S-2 $1,504.00 $1,504.00
Shelton Mindel SM2 Sofa SM2-3 $1,353.00 $1,473.00
Shelton Mindel SM2 Sofa- combination SM2S-3 $2,134.00 $2,134.00
Vignelli Associates Handkerchief Arm and Armless Chair 4901K, 4902K approved $48.00
22

Knoll and Sustainable Design
Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted a
scientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,
verifiable, sustainability standards for our industry.
Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wide
environmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the same
high standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-party
partners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;
GREENGUARD� Environmental Institute; and Chicago Climate Exchange (CCX�).
In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educational
institutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.
1. Global Climate Change
• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement
solutions to some of the world’s most pressing challenges, including environmental change.
• Knoll is a member of the Chicago Climate Exchange, which promotes greenhouse gas reduction through the trading of credits earned
for reducing emissions.
• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.
2. Life Cycle Assessment (LCA) Tool
• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw
materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation of
sustainable practices.
• Knoll has partnered with The Green Standard.org to develop an affordable, universal ISO-compliant computer-based LCA tool that
can be used by the entire contract furniture industry and is partnering on the development of an Environmental Product Declaration
System (EPDs) for Knoll products. EPDs are verified documents containing LCA results and additional environmental performance
information about a product.
3. Setting Industry Standards
• Knoll partners with MTS (The Institue for Market Transformation to Sustainability) to develop the SMaRT © Consensus Sustainable
Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,
fabric, apparel, flooring and carpet. MTS, the developer of SMaRT © , is an accredited American National Standards Institute (ANSI)
standard developer.
• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,
casegoods and tables.
• Knoll also participates in an ongoing BIFMA (Business and Institutional Furniture Manufacturers Association) initiative to establish
level sustainability standards for the contract furniture industry.
• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead to
sustainable products and practices.
For more information about Knoll and sustainable design, visit knoll.com/environment.
23
KnollStudio

GREENGUARD�
GREENGUARD Certified KnollStudio Products
• The most respected independent testing program for low-emitting products.
• GREENGUARD – certified products help reduce indoor air pollution and create healthier interior environments.
• Knoll GREENGUARD – certified products help achieve points for the U.S. Green Building Council’s LEED – CI (Commercial Interiors) Program.
• GREENGUARD – tested and certified office furniture is required for Credit 4.5 in the LEED – CI Indoor Environmental Quality section.
GREENGUARD provides the only guide to certified low-emitting interior products and building materials. Its goal is to help building owners and managers,
architects, interior designers and product specifiers build and furnish healthier offices, hospitals, schools and homes by providing a register of tested and
certified low-emitting products and materials. GREENGUARD certification is recognized by LEED. Air Quality Science, an Independent indoor air quality
laboratory, tests products submitted for GREENGUARD certification using stringent environmental chamber testing protocols and current indoor air quality
standards. Certification is administered by the GREENGUARD Environmental Institute.
Designer Product
Side Chairs and Lounge Seating
Paul Aferiat and Peter Stamberg Salsa Lounge Seating
Amat-3 Twist barstool
Harry Bertoia Side Chair, Barstools, Diamond Chairs, Bird Lounge Chair, Asymmetric Chaise
Cini Boeri Lounge Collection
Marcel Breuer Cesca Chair, Wassily Chair
Don Chadwick Spark Series
Pepe Cortes Jamica Barstool
Jonathan Crinion Crinion Side Chair
Raul de Armas de Armas Chair, Vertical de Armas Chair
Markus Jehs and Jürgen Laub Jehs+Laub Lounge Collection
Antti Kotilainen Chip Chair and Barstool
Florence Knoll Lounge Seating
Piero Lissoni Divina Lounge Collection
Ross Lovegrove Sprite Chair in Maple, Exotic Alpi and Veneer finishes
Maya Lin Seats and Coffee Table
Vico Magistretti Cirene Chair
Marco Maran Gigi Chair, Gigi Swivel, Gigi Barstool, X3 Chair, X3 Barstool
Ludwig Mies van der Rohe Brno Chairs, Four Seasons Stool, MR Chair, MR Lounge Chair, Barcelona Lounge Seating, Krefeld Lounge
Seating
George Nakashima Straight Chair
Jorge Pensi Toledo Chair
Charles Pfister Petite Lounge Seating, Lounge Seating, Sofa System
Warren Platner Lounge Seating
Charles Pollock Executive/ Conference Arm and Armless Chairs
Joe Ricchio Joe Chair
Joe and Linda Ricchio JR Chair, Ricchio Chair, Ricchio Barstool
Jens Risom Side and Lounge Chairs
Eero Saarinen Tulip Chairs, Executive Arm and Armless Chairs, Womb Chair and Ottoman
Peter Shelton and Lee Mindel Shelton Mindel Wood Side Chair
Kazhide Takahama Suzanne Lounge Seating
Massimo and Lella Vignelli Handkerchief Arm and Armless Chairs
Tables
Joseph D’Urso D’Urso Tables with Laminate Top and PVC Edge; Granite Tops; Veneer Tops
Emanuela Frattini Propeller Laminate Tables with Urethane, PVC and 3mm Edgeband Options
Florence Knoll Coffee and End Tables with Marble, Granite, Glass and Veneer Tops
Florence Knoll Table Desks
Ross Lovegrove Rectangular, Round and Tri-Oval Tables; Credenzas and Mobile Pedestal
Ludwig Mies van der Rohe Barcelona Table, MR Table
Pascal Mourgue Tables with laminate Tops and PVC Edge
George Nakashima Splay-Leg Table
Isamu Noguchi Cyclone Table
Jorge Pensi Pensi Tables
Piiroinen Arena Café Tables
Warren Platner Platner Tables with Glass, Natural Marble and Veneer Tops
Jens Risom Dining Table, Side Tables, Amoeba Coffee Table
Eero Saarinen Saarinen Tables with Laminate, Natural Marble, Veneer or Granite Tops
Peter Shelton and Lee Mindel Shelton Mindel Side and Coffee Tables
Massimo and Lella Vignelli PaperClip Café Tables
24
KnollStudio

KnollStudio Finish Code Chart
Compatibility with Knoll Office Systems
KnollStudio
Wood Compatibility Matrix
To match KnollStudio wood side chairs with Knoll Office or KnollStudio veneer finishes, please specify the appropriate Standard Special code. Finishes are
matched on either maple or beech basewood depending on depth of color.
Please note: this match is complimentary in color only. Perception can be affected by the variation in the grain of the basewood.
Example: 37A-BQV436-K784/74
37A, Ricchio Side Chair
BQV436, V2 Natural Veneer - Medium Brown Cherry
K784/74, Knoll Velvet/Moss
STUDIO WOOD SIDE CHAIR FINISHES
Knoll Office Veneers
V1 Engineered Techwoods
CUT Office Finish Code Studio Finish Code
Standard Special Code -
Maple Basewood
Standard Special Code -
Beech Basewood
Maple * FC Y316 Not possible Not possible
Cherry * FC Y319 BQY319
Medium Walnut* FC Y323 B323
Dark Mahogany* FC Y326 BQY326
Light Oak* RC Y327 QY327
Medium Oak* RC Y329 Not possible Not possible
Wenge QC Y341 BQY341
Medium Teak QC Y342 BQY342
Dark Grey Oak RC Y343 BQY343
Espresso QC Y344 BQY344
Natural** QC Y811 (T) Not possible Not possible
Blond Maple (Maple)** QC Y821 (4) KC
Light Cherry (Cherry)** QC Y831 (6) QE6 Not possible
Medium Brown Mahogany QC C6F3 (7) QE7 BQE7
Black Oak RC Y851 BQY851
Medium Red Mahogany QC C6F4 (8) QE8 BQE8
* = previously Reff Techwoods, ** = previously, Morrison Techgrain. Names and codes in parenthesis ( ) are names prior to 2009.
V2 Natural Veneers
Beech FC V311 B311
Bronzed Cherry FC V312 B312
Maple (Light Maple) FC V316 Not possible Not possible
Mahogany on Beech FC V317 BQV317
Medium Cherry on Beech FC V321 BQV321
Medium Walnut on Beech FC V322 BQV322
Light Walnut FC V411 BQV411
Peacock Green Walnut FC V415 BQV415
Old English Walnut FC V417 BQV417
Smoked Walnut FC V418 BQV418
Chalk Oak RC V421 BQV421
Light Oak RC V423 BQV423
Amber Oak RC V425 BQV425
Brown Oak RC V427 BQV427
Light Fawn Cherry FC V433 BQV433
Medium Brown Cherry FC V436 BQV436
Straight Anigre
V3 Natural Exotic Veneers
QC V439 QV439
Figured Anigre QC V512 QV512
Graphite Oak RC V513 BQV513
Makore QC V514 BQV514
Figured Sycamore QC V515 Not Possible Not Possible
Sapele
Studio Veneers, Propeller
QC V517 BQV517
American Cherry FC QEX BQEX
Warm Brown Walnut FC QEJ BQEJ
Ebonized Walnut FC KE/BE
FC= Flat Cut Veneer, exhibits cathedral pattern
RC= Rift Cut Veneer, Straight Grain
QC = Quarter Cut Veneer, Straight Grain
25

KnollStudio Natural Materials
Wood, marble, granite and slate are
natural materials that vary. Use
material samples and printed sample
materials as reference only.
KnollStudio printed and finish
samples offer an example of what an
‘‘average’’ natural material may look
like, within a range of acceptance
carefully delineated by Knoll.
Because of the breadth of variations
possible with any natural material,
Knoll specialists select these
materials with stringent criteria,
accepting only the top3-5%ofwhat
is available.
Wood
Knoll Natural Veneers
All natural finishes are selected from
the finest hardwoods available around
the world. Veneers are flat cut and
carefully matched so that cathedral or
heart patterns are perfectly balanced.
Natural veneers also are cut to allow a
generous margin of quarter-grain
figuring ensuring invisible splicing.
Quarter Cathedral
Pattern Pattern
Knoll Techgrain ®
Knoll Techgrain is a veneer product
that eliminates the inherent
disparities in pattern, color and
texture that characterize natural wood
veneers. The consistency of Techgrain
is important for uniformity. All
KnollStudio Techgrains are
non-figured and feature a regular,
homogenous pattern.
The Techgrain process begins with
wood veneers vat-dyed in natural
vegetable mineral soilines to create a
perfectly clear, integrated color
throughout. The veneer is finish
coated with a clear water-white
catalyzed varnish, a polymer finish
which helps resist staining and
marring. The result is a handsome
surface with the appearance of a
hand-rubbed oil finish.
Finishes
Most finishes are designed to
coordinate with standard Morrison,
Reff and Equity. For reference,
consult the matrix on page 25.
Materials and Finishes
Laminated Plywood (Cirene)
ē De Padova laminated plywood
shells are made of the world’s top
3-5% veneers available. The unique
lamination process allows for an
extremely thin yet sturdy shell
with unmatched flexibility and
dimensionality. Shells are finished in
natural veneer or lacquer.
Marble, Granite and Slate
Knoll selects the highest quality,
structurally sound marble, granite
and slate available, through a host of
quarries in Africa, South America,
Greece, Spain and Italy. Because
each mountain range and quarry
have their own signature, every
marble piece - even within a single
quarry - is unique. Hues, veins,
crystals, fossils, clouds, and
distinctive marks will vary from
piece to piece. This is the
extraordinary character of stone
as a material. Below are the marbles,
granites and slates that KnollStudio
offers:
Coated Marbles
Coated marbles have transparent
polyester coating to prevent
use-associated stains. Even with this
protection, marble should not be left
outdoors. Stains should be wiped
immediately. Coating will yellow over
time.
Arabescato
Ivory white with dark grey veining.
May contain random green veins.
Calacatta
Ivory white. Gold and beige random
veins with additional veins varying
from cream to green and grey.
Carrara
White background with grey veining.
Emperador Dark
Dark Brown with light brown and
white veining. Natural finished
stones will contain open fissures and
pin-holes, which is considered a
natural desirable trait.
Empire Beige
Yellowish-cream with yellow and
rose colored veining and fissures.
Nero Marquina
Rich black with random veins that
can vary from white to gold.
26
Verde Alpi
Green. Black and white veins. Hues
vary in tone and intensity.
White Extra
Light pearl white with grey shading,
random pale to dark grey markings.
Marble may exhibit point inclusions
of dark grey or black.
Natural Marbles
Natural marbles have a protective
sealer to protect the stone from aging
and staining. Sealer has to be
renewed periodically (see product
maintenance on page 27). Natural
marbles are not suitable for outdoor
use.
Carrara
White background with grey veining.
Calacatta
Ivory white. Gold and beige random
veins with additional veins varying
from cream to green and grey.
Emperador Dark
Dark Brown with light brown and
white veining. Natural finished
stones will contain open fissures and
pin-holes, which is considered a
natural desirable trait.
Natural Granites
Natural granites have a sealer to
protect the stone from aging and
staining. Sealer has to be renewed
periodically (see product maintenance
on page 28). Because of its
non-porous density, granite does not
require protective polyester coatings.
Black Andes Granite
Black with reflective mica
crystallines.
Slate
Natural cleft slate is available on
Vignelli PaperClip Tables and SM
Tables.
In combination with a weatherresistant
base, PaperClip tables with
slate tops are suitable for outdoor
use. Please refer to respective
product pages for recommended
finish combinations.
Cane
A natural material, hand-woven for
impeccable finish and smooth
surface. Cane on Cesca chair has a
light polyurethane coating for stain
resistance.
KnollStudio
Man-Made Materials & Finishes
Stainless Steel
Completely rust-proof, highly
durable, and resistant to bending
stress. Light scratching blends with
time.
Polished Chrome
Several-step plating process that
includes a heavy layer of nickel for
added rust protection and a bright
mirror finish.
Satin Chrome
Chrome plating applied for a soft
satinized chrome finish with a higher
nickel content.
Nickel Finish
A warm, lustrous finish of nickel
electroplate. Yellowish in color.
Coated with clear lacquer to prevent
oxidation.
Polished Aluminum
A shiny, polished finish.
Clear Anodized Aluminum
A light grey satin finish.
Fused Nylon Rilsan
A very durable and adhesive fused
nylon-dipped finish. Scratch, chip,
and chemical resistant. Appropriate
for outdoor use.
Laminate
An exceptionally durable plastic
surface. Highly resistant to most
chemicals and extensive wear.
Cotton Webbing
100% cotton unfinished webbing.
Cotton/Nylon Webbing
60% nylon, 40% cotton mixed yarns
with silicone water-based protective
coating.
Porcelain
An oven-baked finish on steel
support with high durability.
Outdoor Powder Coat:
Durable outdoor powder finish that
will provide excellent color and gloss
retention with limited exposure to
outdoor elements.
Painted, acid etched glass:
Clear glass with an acid etched top
and painted underside. Polished and
beveled edges surround.
Panelite:
Translucent cast polymer panel with
a clear structural honeycomb core
and an integral cast resin edge.

With proper care, your KnollStudio
furniture should last for years to
come. To help ensure the longevity of
your purchase, below are helpful hints
on routine cleaning for your
KnollStudio piece. Most basic
maintenance can be performed with
common household cleaning
products.
Textiles
Optional Scotchgard treatment
protects fibers from dirt and staining.
Wipe all spills immediately. Brush
and vacuum every three to four
months. Use a foam upholstery
cleaner as directed semi-annually, or
more frequently if necessary. Try a
hidden area to test for color fastness.
Spinneybeck Leathers
Leather is hardy and will adjust to its
environment. It mellows gracefully
with age. Leather is expected to
change; even the oils from our hands
help to develop the patina.
Full grain, aniline leather is
undemanding. It breathes, has a life
of its own, and requires little care.
It should not be abused by harsh
cleaners, or substances such as wax
or mink oils which will clog the
pores. A periodic wipe with a damp
cloth is a sufficient means of
cleaning under normal conditions.
Spinneybeck now offers a leather
maintenance kit specifically
designed for the 28 qualities offered.
The kit includes a cleaner,
conditioner and ink-remover and can
be ordered by calling 1 800
482-7777. There are three types
of kits:
- finished products
- full aniline products
- brush-sueded products
The following guidelines will help
you to maintain the beauty of the
leather without destroying any of its
natural characteristics.
Product Maintenance
Naked Leather
(Capri, Cervo, Copenhagen,
Cordovan, Distressed, Prima,
Saddle)
Naked leathers contain no foreign
substances that act as a barrier
against spillage or staining.
They should be selected with this in
mind.
The only recommended cleaning
method for naked leather is to wipe
the entire surface with a soft woolen
cloth and water. Do not spot rub for it
will darken only that area. The idea
is to even out any abrasions or stains.
With use, naked leather develops
a beautiful patina that removes many
small scratches and abrasions as
body oils moisturize and revitalize
the leather. Substantial body oil
marks will also dissipate over time,
particularly if rubbed down with cool
water.
Protective Finished Leathers
(Acqua, Alaska, Amazon, Andes,
Antique, Arizona, Derby, Ducale,
España, Forte, Hand Tipped,
Portofino, Riva, Sabrina, Salon,
Velluto Pelle, Vicenza, Volo)
For high traffic use, breathable
protective finish allows leather not
only to be practical but also easy to
maintain. It can be cleaned by
wiping the entire surface with a soft
cloth and a very mild solution of
Ivory Flakes and cold water, followed
by wiping the entire surface with
water alone.
Grain Sueded Leather (Ducale
Velour, Marissa)
For maximum soil resistance and
durability these leathers have
received an impregnated soil
resistant treatment in the drum
which permeates the leather making
it repellent to liquid and dirt.
Grain sueded leather can be
maintained with moderate care
because spillage will bead and roll
off. However, spillage should not be
allowed to puddle, and should be
blotted dry immediately. For normal
care, leather should be brushed
occasionally, with a sueded cleaning
block to help remove general soilage.
If you have further questions about
the care and maintenance
of Spinneybeck leather, call
Spinneybeck Customer Service
at 800 482-7777.
27
Cowhide Slings, Belting Leather
(Spoleto, MR Side Chair, Wassily,
Bertoia cowhide pads)
For normal cleaning, use a soft cloth
dampened with a solution
of mild soap or detergent (Ivory
Flakes) well dissolved in water. Rub
very lightly, never pressing hard. Do
not use solvents because dye may
run. For scratches, use liquid shoe
polish and buff when dry. Any
liquids spilled on leather should be
mopped up as soon as possible in
order to avoid being absorbed by the
leather.
Natural Caning (Cesca Chair)
Use water and glycerin every
three months to keep cane from
drying out.
Vinyl
Clean frequently with a mild
detergent and water. Use leather or
plastic cleaners for unusually heavy
use. Do not use solvents such as
gasoline because plastic surface will
gum and deteriorate.
Wood
Clean with a commercial brand
of liquid furniture polish twice
a month. For stubborn dirt or light
scratches, rub lightly with very fine
steel wool before using furniture
polish. To rejuvenate luster, apply a
furniture cream as a last step. Do not
use water or household solvents: they
will destroy the protective finish.
Lacquer Finishes on Wood
(Florence Knoll credenza)
Frequent cleaning recommended:
once per week with heavy use or
once per month with light use. Clean
with ordinary household soaps or
detergents, well dissolved in water.
Polish with lemon oil using a very
soft cloth. For stubborn dirt or light
scratches, uniformly apply
Cleanbright Liquid Ebony or
Guardsman liquid furniture polish
with cheesecloth. Allow ten minutes
to dry and wipe with a clean, dry
cloth. For nicks, chips, and deep
scratches, contact a professional
refinisher. Never use abrasives.
Wood Frame Chairs
Clean with dry and soft cloth. Rub
smoothly with damp, lukewarm cloth.
Treat sturdy stains with household
soap solution or a solution with
dishwashing liquid. Wipe off with
clean, dry cloth. Do not use acid or
abrasive detergents.
KnollStudio
Marble with Polyester Coating
Wash with lukewarm water. Wash
more thoroughly with Windex,
Fantastik, Ivory Flakes in warm
water, or other non-abrasive
solutions. Rinse with warm water and
dry with a soft cloth.
Natural Marbles/Marbles without
Polyester Coating
Cleaning: Wipe off stains and liquid
spills immediately with water and
soft cloth. Never use steel wool or
other abrasives on marble.
Maintenance: The mineral surface of
marble is very porous and easily
absorbs moisture and fluids causing
corrosion, staining and discoloring. If
applied on a yearly basis,
impregnators or penetrating sealers
protect the interior of the stone,
inhibit discoloration and allow the
stone to breathe and release water
vapor.
To restore a uniform luster, clean
surface from any grit or debris, then
remove all topical coatings
with Stoneguard Stripper. Use
Marbalex to rinse surface, then let
top dry for twelve hours before
applying stone impregnator. Apply
SCI Impregnator using a clean and
dry applicator brush. After five
minutes, wipe off the excess
with soft, white terry cloth. If
impregnator is absorbed within five
minutes apply second coat at least
twelve hours later.
Never use steel wool or other
abrasives on marble.
Slate (PaperClip, SM Tables)
Apply a generous amount of soap
solution (1:5) to the table top with a
hard brush. Wipe off the top with a
clean, damp cloth. Repeat as often as
required. Apply mineral oil or lemon
oil as needed to protect surface.
Granite
Clean with Windex, Fantastik, or
other non-abrasive solutions on a
regular basis. Apply a marble wax to
improve luster and protect finish.
Routine maintenance will prevent
the stone from darkening with use
from body oils, and will help
maintain an evenness of color.

Glass/Acrylic Polycarbonate
(Platner, Gehry, Mies van der Rohe,
Florence Knoll, X3, Lovegrove
Tables and Storage)
Clean with Windex, Fantastik
or other non-abrasive cleaning
solutions. Wipe dry with a
clean cloth.
Laminate/Melamine
Scrub with Windex, Fantastik, Mr.
Clean, or other household soaps or
detergents well dissolved in water, or
with a very soft cloth dampened with
alcohol or a synthetic thinner. For a
dull finish, rub with jeweler’s rouge
as a polishing agent and finish with
paste wax. Never use abrasives.
Remove stubborn stains with Soft
Scrub.
Stainless Steel
Use Windex, Fantastik, or other
non-abrasive household cleaners.
For small scratches, rub with Comet,
Ajax, or other mild abrasives in the
direction of the grain. Apply a coat of
auto wax to maintain beauty.
Chrome/Satin Chrome
Clean with Windex or an automotive
chrome cleaner such as
Semi-Chrome twice a month. Apply a
coat of hard paste wax to protect
against moisture.
Nickel (Platner)
Clean with Windex, Fantastik,
or other non-abrasive cleaning
solutions. If discoloration occurs, rub
lightly with a fine steel wool to
restore luster. Touch-up with a clear
lacquer to prevent oxidation.
Product Maintenance
Polished Aluminum (Pascal Leg)
Clean with Windex, Fantastik, or
other non-abrasive cleaning
solutions. Coat with a hard paste wax
semi-annually to maintain luster and
prevent discoloration.
Anodized Aluminum
(Toledo/Jamaica/Propeller)
Clean with mild soaps, detergents, or
other non-abrasive cleaning agents.
Apply paste wax or DuPont
non-abrasive car polish #7 twice a
year to prevent oxidation.
For stubborn stains or discolorations,
apply navel jelly aluminum
cleaner.
Urethane Edge (Vignelli PaperClip,
Propeller Tables)
Clean with household soaps and
detergents well dissolved in water.
Do not use abrasive cleaning
solutions.
Epoxy (Pollock and Saarinen
Executive Seating Bases, and
Black Pascal Leg)
Clean with Windex, Fantastik,
or other ordinary non-abrasive
household soaps, detergents, or
ammonia at least once a month to
prevent yellowing. For scratches and
chips, rub with Comet, Ajax, or other
mild abrasives. For deeper scratches,
contact Knoll for touch-up paint.
Shine with a high grade auto polish.
Never use harsh abrasives or steel
wool.
Rilsan (Saarinen, Bertoia, and
PaperClip Base)
Clean with Windex, Fantastik,
or other ordinary non-abrasive
household soaps or detergents.
For ink stains on white surfaces, use
Soft Scrub. For scratches and chips,
rub with Comet, Ajax, or other mild
abrasives. For deeper scratches, use
a good grade automotive
acrylic-lacquer touch-up paint.
Shine with a high grade auto polish.
Never use harsh abrasives or steel
wool.
28
Porcelain Base (Noguchi):
Clean with damp cloth using water or
Windex. Do not use any abrasive
detergent.
Powder Coat Paint (Handkerchief
Base, D’Urso Work Table Base,
Salsa Leg and Brackets, Propeller,
Bertoia side chair)
Clean with Windex or Endust using a
soft cloth. Remove stubborn stains
with Soft Scrub.
Polyester Shell
(Handkerchief chair)
Clean with Windex or soap and
water. Do not use any abrasive
detergent.
Plastic Seat Shells (Gigi):
Clean with damp cloth with diluted
soap. Wipe dry with clean cloth. Do
not use any abrasive or acid
detergents.
Cotton Webbing (Risom Chairs)
Use damp cloth to clean. Do not use
detergent or soap or any abrasive
detergent.
Cotton/Nylon Webbing
(Risom Chairs)
Use damp cloth to wipe off stains.
Moving Parts (Pollock and
Saarinen Executive Collections)
Lubricate moving parts every
six months.
Swivel Mechanism
(Saarinen Tulip Chairs)
Apply a paste-type grease to swivel
mechanism once a year.
Plastic/Polyethelene/Panelite�
(Saarinen Executive Seating, Maya
Lin, Spark Series, Lovegrove
Tables)
Clean using a soft rag, either dry or
wet. When needed, use mild
pH-balanced soap diluted in water.
Do not use abrasives sponges, acidic
products or solvents containing
ammonia.
To remove scuff marks, lightly rub
scuff mark with a dry, non-scratch
scour pad, like Scotch-Brite.
KnollStudio

KnollStudio 20-Day Program
An assortment of our most popular products are available to ship in twenty working days:
Scope:
The KnollStudio 20-Day program
offers a selection of products,
finishes and upholstery materials for
KnollStudio products only. 20-Day
products and finishes are denoted by
a helicopter ( ) on the relevant
page of the price list. See page 30 for
a list of products and finishes, and
maximum order quantities that are
available within the 20-Day program.
Knoll will upholster 20-Day pieces
in any approved KnollTextile or
Spinneybeck leather that is in stock
in sufficient quantity at time of order
entry if not denoted otherwise. To
check availability, call
1-800-523-0346 for KnollTextiles
and 1-800-482-7777 for
Spinneybeck leathers or contact your
KnollStudio sales representative.
The upholstery scope listed below
represents KnollTextiles and
Spinneybeck leathers that are
guaranteed to be in stock to support
upholstered pieces on the 20-Day
program unless noted otherwise in
the upholstery column on page 30.
Availability:
20-Day orders can be fulfilled
pending availability. Before
specifying a 20-Day order, please
check the lead time sheet on Knoll
Exchange or contact your
KnollStudio sales or customer
resources representative to ensure
availability.
Maximum order quantities are listed
on page 30. Please check with your
customer resources representative for
availability of larger quantities.
For specific terms and conditions,
consult the Knoll Group Selling
Policy on pages 404-405.
KnollStudio 20-Day Program Upholstery Scope
KnollStudio
Specification Guidelines:
20-Day orders should contain the
following:
• Orders should be specified
separately from standard lead time
orders. Separate delivery charges
may apply.
• A special prefix is required for
20-Day items. Please make sure all
20-Day items are marked with a
‘‘KS’’ prefix, as outlined on page 30.
• Full payment is required,
including applicable tax and delivery
fees.
• No changes or cancellations are
allowed.
• 20-Day products are only
available in the continental United
States and Canada.
Knoll will upholster 20-day pieces in any approved KnollTextile or Spinneybeck leather that is in stock at the time of
order entry. To check availability, call 1-800-523-0346 for KnollTextiles or 1-800-482-7777 for Spinneybeck leathers,
or contact your KnollStudio customer resources representative. The textile and leather selection listed below are
reserved for the 20-day quickship program and are most likely to be instock at time of order entry.
KnollTextiles Spinneybeck Leather
Grade A:
Grade B:
Grade G:
Grade U:
Common Ground K448 Classic Boucle K162 Ultrasuede K1021 Volo
15 colorways, Teflon soil 13 colorways, 48% nylon, 21 colorways, high Black (BLK)
and stain repellant, 100% 52% wool content performance, stain Toast(903)
nylon content
Mariner K642
Vinyl K242
10 colorways, outdoor
resistant, 100% Polyester
Ultra Microfiber content
8 colorways, 100% nylon approved, 100% vinyl
content
face, backing 6%
polyester, 91% vinyl, 3%
cotton content
29

Items Available on KnollStudio 20-Day Program
KnollStudio
Product
Side Chairs, Barstools and Lounge Seating
Code Finish Upholstery
Max. qty.
per order Page
Twist barstool, bar height KS-31C-A Aluminum 4 34
Twist barstool, counter height KS-31C-2-A Aluminum 4 34
Bertoia side chair KS-420C-C Chrome unupholstered 10 36
Bertoia side chair KS-420C-C-K Chrome In stock upholstery 10 36
Bertoia counter height stool KS-427C-C Chrome unupholstered 5 40
Bertoia counter height stool KS-427C-C-K Chrome In stock upholstery 5 40
Bertoia bar height stool KS-428C-C Chrome unupholstered 5 38
Bertoia bar height stool KS-428C-C-K Chrome In stock upholstery 5 38
Bertoia Diamond chair KS-421L-C-K Chrome In stock upholstery 5 42
Bertoia Seat cushions KS-420K, KS-427K,
KS-428K
In stock upholstery 5 36
Wassily chair KS-50L-L80
Black or
2 54
KS-50L-BL1905 Red Spinneybeck Belting Leather
Spark side chair KS-4-C-SD-N Red, Blue, Citron, Light Grey, Dark
Grey, Recycled Black
unupholstered 25 56
Spark lounge chair KS-4-C-LG-N Red, Blue, Citron, Light Grey, Dark
Grey, Recycled Black
unupholstered 25 56
Jamaica bar height stool KS-30C-A Aluminum top 10 58
Jamaica counter height stool KS-30C2-A Aluminum top 10 58
Chip armless chair KS-23C Chrome Base, White, Birch, Grey 10 82
Sprite armless chair KS-27C Chrome base, Black, White, Maple,
solid front and back only
10 88
Gigi armless chair KS-87C White, Graphite, Black, Red, Navy 25 94
Gigi arm chair KS-87A White, Graphite, Black, Red, Navy 10 94
Gigi barstool, counter height KS-87CM White, Graphite, Black, Red, Navy 10 96
Gigi barstool, bar height KS-87CH White, Graphite, Black, Red, Navy 10 96
Barcelona chair KS-250LC Chrome Volo Black (VO BLK) 2 110
Barcelona ottoman KS-251YC Chrome Volo Black (VO BLK) 2 110
Toledo chair KS-29C 10 118
Spoleto chair KS-50CS-L80 Black belting leather 2 166
Womb chair KS-70L-C Chrome Base Classic Boucle/Pearl
Classic Boucle/Cayenne
2 150
Womb ottoman KS-74Y-C Chrome Base Classic Boucle/Pearl
Classic Boucle/Cayenne
2 150
Tables
Albini desk KS-80D-E Ebonized 1 174
Laccio side table KS-50T1 Black, white 2 176
Laccio coffee table KS-50T2 Black, white 2 176
D’Urso square work table KS-6348 In stock laminate, black legs, glides 10 178
D’Urso round work table KS-6242 In stock laminate, black legs, glides 10 180
D’Urso racetrack work table KS-6472 In stock laminate, black legs, glides 10 184
Florence Knoll tables KS-2510T-C-G2
KS-2511T-C-G2
Chrome base, glass top 2 198
Pensi bar height table KS-29TR-H-23-CC Concentric circles 3 224
Pensi café table KS-29TS-35-DE
KS-29TR27-DE
KS-29TR-39-DE
Disks 3 224
Arena round café table KS-23TR36-C-W Chrome base, white top 3 228
Barcelona table KS-252C Chrome base 1 210
MR table KS-259TS-G 2 210
Cyclone dining table KS-311-F2 White top 1 222
Platner side and coffee tables KS-3710T-N-G2 Nickel base, clear glass top 2 230
KS-3710T-BRM-G2
KS-3712T-BRM-G2
KS-3714-BRM-G2
Bronze base, clear glass top 2 230
KS-3710T-BRM-BRG
KS-3712T-BRM-BRG
KS-3714T-BRM-BRG
Bronze base, bronze glass top 2 230
30

Items Available on KnollStudio 20-Day Program
Product
Tables, continued
Code Finish Upholstery
Max. qty.
per order Page
Saarinen dining tables KS-173TR-F2-2
KS-176TR-F2-2
KS-164TR-F2-2
Laminate top, white base 2 238
Saarinen side and coffee tables KS-169TR-LO-2 Light oak top, white base
1 244
KS-169TR-F2-2 White laminate top, white base
KS-163TR-F2-2 White laminate top, white base
Please see pages 29 and 32 for more information on placing a KnollStudio 20-Day order.
31
KnollStudio

Use the Following Address:
If you would like to send an order
directly to our order entry
departments, please use the
following address:
Knoll, Inc.
P.O. Box 157
East Greenville, PA 18041
Attn: Order Entry
Fax: 215 679-1570
Tel: 800 343-KNOLL
Placing Your KnollStudio Order
When Placing Your Order, Include:
• All information requested on the
order form.
• Local taxes for the ‘‘delivered to’’
address.
• For orders $2,000 or under
(including applicable taxes and
delivery/installation fees, if any),
full payment must be made when
order is placed.
• For orders over $2,000, a deposit
equal to one-half of the complete
order value is required at order
placement. Balance must be
settled before shipment.
• For 20-day orders, please adhere
to the specification guidelines on
page 29.
32
Key Points to Remember:
All accepted orders will be
confirmed in writing on the Knoll
standard acknowledgement form. A
copy of the acknowledgement will be
mailed to the customer prior to
production.
Freight within the 48 contiguous
United States and Canada, excluding
the Yukon, Northwest Territories and
Newfoundland, is prepaid and
included in the price of all orders.
For residential orders, Knoll strongly
recommends White
Glove delivery service to most
locations in the Continental United
States and Canada. White Glove
service includes inside delivery,
unpacking, furniture installation and
removing cartons and crates. The fee
for this service will be quoted at the
point of purchase.
KnollStudio’s limited warranty covers
all furniture against manufacturing
defects in this price list for a period
of five years after delivery to the
customer.
All pricing is in U.S. dollars.
For More Information:
For complete Knoll Selling Policy
and warranty information, please
refer to pages 404-405 in the back of
this price list.
For additional information
on KnollStudio, contact your
KnollStudio representative, a Knoll
Space retailer or e-tailer, or
telephone Customer Services at
800 343-KNOLL. To find the retailer
or showroom nearest you, visit
www.knoll.com.
KnollStudio

Designer(s):
Amat-3
Order Code
Example: 31C-A
31C Twist Barstool, bar height
A Aluminum finish
Example: 31CK-K715/10
31CK Twist seat cover
K715/10 Abacus, Sand Dollar
Note:
Twist barstool can be used with Pensi bar
height tables on page 224.
Available in the United States only.
Specify:
1. Pattern number
2. Finish selection
For seat cover, specify:
1. Pattern number
2. Textile selection
Amat-3
Twist Barstool
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
31C Twist Barstool, bar height 30 1 /2� 20� 20� 30 1 /2� 14 lbs.
31C2 Twist Barstool, counter height 26� 20� 20� 26� 14 lbs.
31CK Twist barstool seat cover 0.5 9
Ordering Information
Finishes:
Aluminum (suffix A)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Outdoor use:
With proper preventative maintenance,
the Twist barstool without pad is
appropriate for outdoor environments.
Aluminum will not reflect extreme
outdoor temperatures.
34
KnollStudio 20 Day Program:
The Twist bar and counter height stools
without a seat cover are available on the
20-day program. For specific
information, consult pages 29 - 32.
Cal 133 Fire Codef:
The Amat-3 Twist barstool without
upholstery complies with California
Technical Bulletin 133. See page 18.
The Twist Barstool is Greenguard
certified.
Maintenance:
See pages 27-28.
Construction
Seat and frame and footrest:
Constructed of polished, anodized cast
aluminum. The Twist Barstool is 100%
recyclable.
Twist seat cover:
The seat cover can be slipped over the
seat. It is held in place with an elastic
wrap. Seat cover is unpadded.
Twist Barstool is manufactured in Spain
by Amat-3.

pattern no.
31C-A $992.
31C2-A 992.
grades
A
COM
B C D E F G H I
COL
U V W X Y
31CK -( ) 132. 150. 167. 183. 199. 211. 228. 264. 287. 369. 432. 556. 585. 616.
Approved KnollTextiles Grades/Fabric
A
Bocce
Cat’s Cradle
Common Ground
Mariner
Monarch
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Classic Boucle
Close Knit
Digit
Dovetail
Fairway
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Mini Stitch
Night Life
Paradigm
Pogo
Pop
B continued
Ricochet
Spark
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
C
Atlas
Biota
Charm
Circa
Cricket
Earthwork
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
C continued
Hula Hoop
Kaleidoscope CR
Legend CR
Lore CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Smart
Spectator
Star Struck
Swing
Transition
Treble CR
Vibe
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
Masquerade
Obi
Plain Linen
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
35
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Maremma
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Harry Bertoia, 1952
Award(s):
‘‘Designer of the Year’’ 1955,
USA; Certificate of Merit,
American Institute of Architects
Order Code
Example: 420C-C-K-K242/13
420C Side chair
C Polished Chrome
K Seat cushion
K242/13 Vinyl, White
Specify:
1. Pattern number
2. Finish selection
3. Upholstery option
4. Cal 133 Fire Code option
5. Textile selection
For cushion replacement specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Side Chair
description seat h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
420CU Side chair, full cover 17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 1.8 n/a 14 lbs.
17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 1.8 n/a 14 lbs.
420F Full cover replacement 1.8 n/a
420C Side chair, back pad and seat cushion 17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 1.5 n/a 14 lbs.
17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 1.5 n/a 14 lbs.
420P Back Pad Replacement 0.7 n/a
420KP Back pad and seat cushion
replacement
420C Side chair, seat cushion or
unupholstered
1.5 n/a
17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 0.8 14 14 lbs.
17 3 /4� 21 3 /4� 19 3 /4� 28 3 /4� 0.8 14 14 lbs.
420K Seat cushion replacement 0.8 14
Ordering Information
Frame finishes:
Black (suffix BL)
Blue (suffix BU)
Green (suffix GE)
Polished Chrome (suffix C)
Red (suffix RD)
Satin Chrome (suffix CO)
White (suffix W)
Yellow (suffix YL)
Upholstery options:
Full cover (suffix U)
Seat cushion only (suffix K)
Back pad and seat cushion combination
(suffix KP)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
36
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio 20 Day Program:
The Bertoia 420 Side Chair is available
in polished chrome finish on the 20-day
program unupholstered or with a seat
cushion upholstered with in-stock
KnollTextile. Replacement seat cushions
are also available with in-stock
KnollTextiles. For specific information,
consult pages 29 - 32.
Outdoor use:
With proper care and limited exposure to
the elements, the Bertoia Collection is
appropriate for outdoor environments.
Specify outdoor powder coat (red, yellow,
green, blue, black, white). Consult a
Knoll representative for appropriate
upholstery options.
Cal 133 Fire Codef:
The Bertoia Chairs with seat cushion
attached comply with California
Technical Bulletin 133 in all
upholstery. All textiles marked with a
flame are also Cal 133 approved for
full cover or seat and back pad
upholstery. Specify suffix -C at end of
pattern number and suffix -133 at end of
textile selection.
Note:
The Knoll logo is stamped into the base
of the chair.
The Bertoia Side Chair is Greenguard
certified.
Maintenance:
See pages 27-28.

pattern no.
unuph.
(remove
suffix -K)
grades
A
COM
B C D E F G H I
420C-( )-U $1,315. $1,385. $1,447. $1,525. $1,583. $1,628. $1,697. $1,840. $1,943.
420C-CO-U 1,535. 1,605. 1,668. 1,745. 1,804. 1,849. 1,918. 2,061. 2,163.
420F-( ) 585. 648. 706. 775. 831. 870. 935. 1,065. 1,159.
420C-( )-KP 1,412. 1,447. 1,482. 1,519. 1,551. 1,574. 1,611. 1,683. 1,797.
420C-CO-KP 1,641. 1,676. 1,711. 1,748. 1,780. 1,803. 1,840. 1,912. 2,026.
420P-( ) 390. 405. 420. 436. 449. 459. 475. 506. 529.
420KP-( ) 621. 653. 684. 719. 747. 768. 803. 868. 916.
COL
U V W X Y
420C-( )-K 740. 930. 959. 990. 1,024. 1,051. 1,074. 1,106. 1,170. 1,220. 1,402. 1,516. 1,747. 1,794. 1,851.
420C-CO-K 969. 1,159. 1,188. 1,218. 1,253. 1,280. 1,303. 1,334. 1,399. 1,448. 1,631. 1,745. 1,976. 2,023. 2,080.
420K-( ) 222. 248. 276. 307. 331. 349. 378. 435. 478. 640. 739. 942. 981. 1,028.
Construction
Base and basket:
Welded steel with rods in polished or
satin chrome, or highly durable outdoor
power coat (red, yellow, green, blue,
white, black). The diameter of the base
rods are 11mm. The diameter of the edge
rods is 4.5 mm and the interlacements
measure 4mm. The chair features
stainless steel connections and plastic
glides.
Upholstery:
Cushion and back pad secured to chair
with domed metal lock snaps. Seat
cushions and back pads have fabric
edges. Full covers are stretched over
wire seat basket and attach to seat basket
with hooks. Back pad is not available
with leather upholstery.
Approved KnollTextiles Grades/Fabric
A
Bocce
Common Ground *
Mariner *
Presto *
Stacks
B
Abacus
Bank Shot *f
Belize
Classic Boucle *f
Digit
Field Day *
Forza
Grande
Knoll Felt *f
Knoll Hopsack *f
Night Life
Nonchalant CR
B continued
Pop
Ricochet
Spotlight
Starry Night
Utmost *
Vinyl
Wide Angle
C
Biota
Earthwork
English Accent
Entourage *
Hula Hoop
Moto CR
Quark
Rio
Roundtrip
Smart
Spectator
Swing *
Transition *
Vibe
37
D
Cavalierf
Harrison *f
Hologram
Masquerade
Obi
Plain Linen
Zoom
E
Kimono
Luberon
Plus
Whip
F
Calais Cotton
Velvet
Cornaro *
Cuddle Cloth *
Eclipse
Groove Line
Icon
Tweed Frieze
Una *
G
Haze *
Ultrasuede *
H
Arno *f
Bavaria *
Lyonese Velvet
I
Byron
Cato *
Cummings
Knoll Velvet *
North Island *f
Stirling *
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Lucente
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
* Approved for fully upholstered
versions.
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Harry Bertoia, 1952
Award(s):
‘‘Designer of the Year’’ 1955,
USA; Certificate of Merit,
American Institute of Architects
Order Code
Example: 428C-C-KP-K1021/8
428C Barstool, bar height
C Polished Chrome
KP Back and seat pad
K1021/8 Ultrasuede, Poppy
Specify:
1. Pattern number
2. Finish selection
3. Upholstery option
4. Cal 133 Fire Code option
5. Textile selection
For cushion replacement, specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Barstools
Bar Height Stools
description seat h w d h
textile
fabric yds.
req. leather
sq. ft. weight
428CU Barstool, full cover, bar height 29 1 /4� 21 3 /4� 22� 41 1 /4� 1.8 n/a 22 lbs.
29 1 /4� 21 3 /4� 22� 41 1 /4� 1.8 n/a 22 lbs.
428F Full cover replacement for 428C 1.8 n/a
428C-KP Barstool, back pad and seat
cushion, bar height
29 1 /4� 21 3 /4� 22� 41 1 /4� 1.5 n/a 22 lbs.
29 1 /4� 21 3 /4� 22� 41 1 /4� 1.5 n/a 22 lbs.
428P Back pad replacement 0.7 n/a
428KP Back pad and seat cushion
replacement
428C Barstool, seat cushion or
unupholstered, bar height
1.5 n/a
29 1 /4� 21 3 /4� 22� 41 1 /4� 0.8 14 21 lbs.
29 1 /4� 21 3 /4� 22� 41 1 /4� 0.8 14 21 lbs.
428K Seat cushion replacement for 428C 0.8 14
Ordering Information
Frame finishes:
Black (suffix 1)
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
White (suffix 2)
Upholstery options:
Full cover (suffix U)
Seat cushion only (suffix K)
Back pad and seat cushion combination
(suffix KP)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leather may be
ordered.
38
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information, please see
page 20.
KnollStudio 20-Day Program:
The Bertoia 428 barstool is available in a
polished chrome finish on the 20-Day
Program unupholstered or with seat
cushion upholstered with any in-stock
KnollTextile. Seat cushion only is
available on the 20-day program with any
in-stock KnollTextile. For specific
information, consult pages 29-32.
Outdoor use:
With proper care and limited exposure to
the elements, the Bertoia Collection is
appropriate for outdoor environments.
Specify rilsan finish and vinyl seat
cushion only. Consult a Knoll
representative for appropriate upholstery
options.
Cal 133 Fire Code f:
The Bertoia Barstools with seat cushion
attached comply with California
Technical Bulletin 133 in all upholstery.
All textiles marked with a flame are
also Cal 133 approved for full cover
or seat and back pad upholstery.
Specify suffix -C at end of pattern
number and suffix -133 at end of textile
selection.
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the barstool.
The Bertoia Bar Height stool is
Greenguard certified.

pattern no.
unuph.
(remove
suffix -K)
grades
A
COM
B C D E F G H I
428C-( )-U $1,784. $1,843. $1,901. $1,964. $2,017. $2,056. $2,117. $2,237. $2,327.
428C-CO-U 2,161. 2,221. 2,278. 2,341. 2,394. 2,433. 2,494. 2,615. 2,704.
428F-( ) 585. 648. 706. 775. 831. 870. 935. 1,065. 1,159.
428C-( )-KP 1,988. 2,023. 2,058. 2,095. 2,127. 2,149. 2,187. 2,259. 2,312.
428C-CO-KP 2,381. 2,416. 2,451. 2,488. 2,519. 2,541. 2,580. 2,652. 2,704.
428P-( ) 390. 405. 420. 436. 449. 459. 475. 506. 529.
428KP-( ) 621. 653. 684. 719. 747. 768. 803. 868. 916.
COL
U V W X Y
428C-( )-K 1,316. 1,477. 1,505. 1,530. 1,561. 1,585. 1,602. 1,629. 1,688. 1,729. 1,888. 1,986. 2,185. 2,226. 2,273.
428C-CO-K 1,709. 1,870. 1,898. 1,923. 1,954. 1,978. 1,995. 2,022. 2,081. 2,122. 2,281. 2,378. 2,578. 2,619. 2,666.
428K-( ) 222. 248. 276. 307. 331. 349. 378. 435. 478. 640. 739. 942. 981. 1,028.
Construction
Base and basket:
Welded steel with rods in polished or
satin chrome or highly durable bonded
rilsan (white and black). Stainless steel
connections. Holes pre-drilled for easy
snap-in installation. 1 1 /4� wide round
articulated glides on barstool. Black
plastic glide with metal cover. Barstool
base wire diameter measures 14mm,
basket edge measures 7mm and
interlacements measure 5 mm.
Upholstery:
Cushion and back pad secured to chair
with domed metal lock snaps. Seat
cushions and back pads have fabric
edges. Full covers are stretched over
wire seat basket and attach to seat basket
with hooks. Back pad is not available
with leather upholstery.
Approved KnollTextiles Grades/Fabric
A
Bocce
Common Ground *
Mariner *
Presto *
Stacks
B
Abacus
Bank Shot *f
Belize
Classic Boucle *f
Digit
Field Day *
Forza
Grande
Knoll Felt *f
Knoll Hopsack *f
Night Life
Nonchalant CR
Pop
Ricochet
Spotlight
B continued
Starry Night
Utmost *
Vinyl
Wide Angle
C
Biota
Earthwork
English Accent
Entourage *
Hula Hoop
Moto CR
Quark
Rio
Roadtrip
Smart
Spectator
Swing *
Transition *
Vibe
39
D
Cavalierf
Harrison *f
Hologram
Masquerade
Obi
Plain Linen
Zoom
E
Kimono
Luberon
Plus
Whip
F
Calais Cotton
Velvet
Cornaro *
Cuddle Cloth *
Eclipse
Groove Line
Icon
Tweed Frieze
Una *
G
Haze *
Ultrasuede *
H
Arno *f
Bavaria *
Lyonese Velvet
I
Byron
Cato *
Cummings
Knoll Velvet *
North Island *f
Stirling *
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
KnollStudio
W continued
Lucente
Sabrina
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
* Approved for fully upholstered
versions.
f Available for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Harry Bertoia, 1952
Award(s):
‘‘Designer of the Year’’ 1955,
USA; Certificate of Merit,
American Institute of Architects
Order Code
Example: 427C-C-U-K1207/2
427C Barstool, counter height
C Polished Chrome
U Fully upholstered
K1207/2 Knoll Felt, Tan
Specify:
1. Pattern number
2. Finish selection
3. Upholstery option
4. Cal 133 Fire Code option
5. Textile selection
For cushion replacement, specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Barstools
Counter Height Stools
description seat h w d h
textile
fabric yds.
req. leather
sq. ft. weight
427CU Barstool, full cover, counter height 27 1 /2� 21 3 /4� 22� 39 1 /2� 1.8 n/a 20 lbs.
27 1 /2� 21 3 /4� 22� 39 1 /2� 1.8 n/a 20 lbs.
427F Full cover replacement for 427C 1.8 n/a
427C-KP Barstool, back pad and seat
cushion, counter height
27 1 /2� 21 3 /4� 22� 39 1 /2� 1.5 n/a 20 lbs.
27 1 /2� 21 3 /4� 22� 39 1 /2� 1.5 n/a 20 lbs.
427P Back pad replacement 0.7 n/a
427KP Back pad and seat cushion
replacement
427C Barstool, seat cushion or
unupholstered, counter height
1.5 n/a
27 1 /2� 21 3 /4� 22� 39 1 /2� 0.8 14 20 lbs.
27 1 /2� 21 3 /4� 22� 39 1 /2� 0.8 14 20 lbs.
427K Seat cushion replacement for 427C 0.8 14
Ordering Information
Frame finishes:
Black (suffix 1)
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
White (suffix 2)
Upholstery options:
Full cover (suffix U)
Seat cushion only (suffix K)
Back pad and seat cushion combination
(suffix KP)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
40
Customer’s Own Material is available
pending approval for approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio 20-Day Program:
The Bertoia 427 barstool is available in a
polished chrome finish unupholstered or
with a seat pad on the 20-day program.
Replacement seat cushion is also
available. Seat cushion must be
upholstered with an in-stock
KnollTextile. For specific information,
consult pages 29-32.
Outdoor use:
With proper care and limited exposure to
the elements, the Bertoia Collection is
appropriate for outdoor environments.
Specify rilsan finish and vinyl seat
cushion only. Consult a Knoll
representative for appropriate upholstery
options.
Cal 133 Fire Code f:
The Bertoia Barstools with seat cushion
attached comply with California
Technical Bulletin 133 in all upholstery.
All textiles marked with a flame are
also Cal 133 approved for full cover
or seat and back pad upholstery.
Specify suffix -C at end of pattern
number and suffix -133 at end of textile
selection.
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the barstool.
The Bertoia Counter Height stool is
Greenguard certified

pattern no.
unuph.
(remove
suffix -K)
grades
A
COM
B C D E F G H I
427C-( )-U $1,784. $1,843. $1,901. $1,964. $2,017. $2,056. $2,117. $2,237. $2,327.
427C-CO-U 2,161. 2,221. 2,278. 2,341. 2,394. 2,433. 2,494. 2,615. 2,704.
427F-( ) 585. 648. 706. 775. 831. 870. 935. 1,065. 1,159.
427C-( )-KP 1,988. 2,023. 2,058. 2,095. 2,127. 2,149. 2,187. 2,259. 2,312.
427C-CO-KP 2,381. 2,416. 2,451. 2,488. 2,519. 2,541. 2,580. 2,652. 2,704.
427P-( ) 390. 405. 420. 436. 449. 459. 475. 506. 529.
427KP-( ) 621. 653. 684. 719. 747. 768. 803. 868. 916.
COL
U V W X Y
427C-( )-K 1,316. 1,477. 1,505. 1,530. 1,561. 1,585. 1,602. 1,629. 1,688. 1,729. 1,888. 1,986. 2,185. 2,226. 2,273.
427C-CO-K 1,709. 1,870. 1,898. 1,923. 1,954. 1,978. 1,995. 2,022. 2,081. 2,122. 2,281. 2,378. 2,578. 2,619. 2,666.
427K-( ) 222. 248. 276. 307. 331. 349. 378. 435. 478. 640. 739. 942. 981. 1,028.
Construction
Base and basket:
Welded steel with rods in polished or
satin chrome or highly durable bonded
rilsan (white and black). Stainless steel
connections. Holes pre-drilled for easy
snap-in installation. 1 1 /4� wide round
articulated glides on barstool. Black
plastic glide with metal cover. Barstool
base wire diameter measures 14mm,
basket edge measures 7mm and
interlacements measure 5 mm.
Upholstery:
Cushion and back pad secured to chair
with domed metal lock snaps. Seat
cushions and back pads have fabric
edges. Full covers are stretched over
wire seat basket and attach to seat basket
with hooks. Back pad is not available
with leather upholstery.
Approved KnollTextiles Grades/Fabric
A
Bocce
Common Ground *
Mariner *
Presto *
Stacks
B
Abacus
Bank Shot *f
Belize
Classic Boucle *f
Digit
Field Day *
Forza
Grande
Knoll Felt *f
Knoll Hopsack *f
Night Life
Nonchalant CR
Pop
Ricochet
Spotlight
B continued
Starry Night
Utmost *
Vinyl
Wide Angle
C
Biota
Earthwork
English Accent
Entourage *
Hula Hoop
Moto CR
Quark
Rio
Roundtrip
Smart
Spectator
Swing *
Transition *
Vibe
41
D
Cavalierf
Harrison *f
Hologram
Masquerade
Obi
Plain Linen
Zoom
E
Kimono
Luberon
Plus
Whip
F
Calais Cotton
Velvet
Cornaro *
Cuddle Cloth *
Eclipse
Groove Line
Icon
Tweed Frieze
Una *
G
Haze *
Ultrasuede *
H
Arno *f
Bavaria *
Lyonese Velvet
I
Byron
Cato *
Cummings
Knoll Velvet *
North Island *f
Stirling *
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
KnollStudio
W continued
Lucente
Sabrina
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
* Approved for fully upholstered
versions.
f Available for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Harry Bertoia, 1952
Award(s):
‘‘Designer of the Year’’ 1955,
USA; Certificate of Merit,
American Institute of Architects
Order Code
Example: 421L-CO-U-K231/1
421L Diamond chair
CO Satin Chrome
U Fully upholstered
K231/1 Cuddle Cloth, Neutral
Specify:
1 Pattern number
2. Finish selection
3. Upholstery option
4. Cal 133 Fire Code Option
5. Textile selection
For cushion replacement, specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Diamond Lounge Seating
description seat h w d h
421L Diamond chair, seat cushion with
glides
textile
fabric yds.
req. leather
sq. ft. weight
16 1 /2� 33 1 /2� 28 1 /4� 30� 0.7 14 16 lbs.
16 1 /2� 33 1 /2� 28 1 /4� 30� 0.7 14 16 lbs.
421K Seat cushion replacement 0.7 14
421LU Diamond chair, full cover with glides 16 1 /2� 33 1 /2� 28 1 /4� 30� 3.0 n/a 16 lbs.
16 1 /2� 33 1 /2� 28 1 /4� 30� 3.0 n/a 16 lbs.
421F Full cover replacement 3.0 n/a
421LS Child’s Diamond chair, seat cushion
with glides
11 3 /4� 24 1 /2� 22 3 /4� 24� 0.7 11 9 lbs.
421KS Child’s Diamond, seat cushion
replacement
421LS Child’s Diamond chair, full cover
with glides
421FS Child’s Diamond, full cover
replacement
422LU Large diamond chair, full cover with
glides
0.7 11
11 3 /4� 24 1 /2� 22 3 /4� 24� 2.5 n/a 10 lbs.
2.5 n/a
15 1 /4� 45� 31 1 /2� 28 1 /4� 3.8 n/a 24 lbs.
422F Full cover replacement 3.8 n/a
Ordering Information
Frame finishes:
Black (suffix 1)
Polished Chrome (suffix C)
Satin Chrome (suffix CO)�
White (suffix 2)
Upholstery options:
Full cover (suffix U)
Seat cushion only (suffix K)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
42
KnollStudio 20-Day Program:
The Diamond chair in a polished chrome
finish is available on the KnollStudio
20-Day program with seat cushion
upholstered with any in-stock
KnollTextile. For specific information,
consult pages 30 -32.
Outdoor use:
With proper care and limited exposure to
the elements, the 421 Bertoia Diamond
Chair is appropriate for outdoor
environments. Specify rilsan finish and
vinyl seat cushion only. Consult a Knoll
representative for appropriate upholstery
options.
Cal 133 Fire Code f:
Bertoia 421 chair with seat pad attached
is approved for Cal 133 on all upholstery.
Cal 133 is approved for selected fabrics
marked with a flame for fully upholstered
versions. Specify suffix -C at end of
pattern number.
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the chair.
The Bertoia Diamond Lounge Seating is
Greenguard certified.
The Child’s Diamond Chair is compliant
to the Consumer Product Safety
Improvement Act of 2008 for Children’s
Products, 16 C.F.R. 1303, CPSIA Title 1
Section 101 for Total Lead in Substrates
and Surface Coatings.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
421L-K $1,462. $1,494. $1,526. $1,555. $1,583. $1,601. $1,635. $1,696. $1,739. $2,062. $2,183. $2,435. $2,487. $2,548.
421LCO-K 1,778. 1,810. 1,841. 1,871. 1,899. 1,917. 1,951. 2,012. 2,054. 2,377. 2,499. 2,750. 2,803. 2,863.
421K-( ) 369. 399. 425. 454. 478. 496. 523. 579. 620. 909. 1,021. 1,245. 1,292. 1,346.
421L-U 2,309. 2,440. 2,559. 2,691. 2,799. 2,878. 3,009. 3,264. 3,450.
421LCO-U 2,611. 2,742. 2,861. 2,993. 3,101. 3,180. 3,311. 3,566. 3,752.
421F-( ) 903. 1,018. 1,124. 1,243. 1,339. 1,409. 1,529. 1,752. 1,919.
421LS-C-K 853. 866. 879. 891. 903. 911. 926. 951. 975. 1,054. 1,106. 1,211. 1,234. 1,259.
421KS-( ) 219. 235. 250. 265. 279. 288. 305. 335. 358. 457. 517. 642. 668. 698.
421LS-C-U 1,109. 1,155. 1,200. 1,248. 1,288. 1,318. 1,366. 1,460. 1,528.
421FS-( ) 557. 611. 664. 721. 768. 803. 860. 970. 1,050.
422L-U 3,084. 3,222. 3,348. 3,490. 3,605. 3,689. 3,832. 4,101. 4,299.
422F-( ) 937. 1,056. 1,167. 1,290. 1,389. 1,462. 1,585. 1,819. 1,992.
Construction
Frame:
Welded steel with rods in polished or
satin (421L only) chrome finish or
bonded rilsan, a very durable and
adhesive fused nylon-dipped finish.
Scratch, chip, and chemical resistant.
Stainless steel connections. Four plastic
glides. On all Diamond chairs, the base
wire diameter measures 11mm. The
frame edge wire diameter measures
4.5mm, the interlacements measure 4mm
in diameter.
Upholstery:
Cushion secured to chair with
lock-snaps. Full covers are stretched
over wire frame and attach to seat basket
with hooks. Cushions and covers fit all
Bertoia Diamond Chairs manufactured
since 1952 within a limited range of
tolerance.
422L is not available with seat pad
option.
Child’s Diamond Chair:
The Child’s Diamond Chair is 75% scale
of the standard size and is only available
with polished chrome frame.
Approved KnollTextiles Grades/Fabric
A
Common Groundf
Mariner
Presto
Stacks *
B
Abacus *
Bank Shotf
Classic Bouclef
Digit *
Field Day
Forza *
Grande *
Knoll Felt
Knoll Hopsack
Night Life *
Nonchalant CR *
B continued
Ricochet *
Spotlight *
Starry Night *
Utmost
Vinyl *
C
English Accent *
Entourage
Hula Hoop *
Moto CR *
Quark *
Swing
Transition
Vibe *
43
D
Cavalier *
Harrisonf
Hologram *
Masquerade *
Satellite *
Zoom *
E
Luberon *
Plus *
F
Calais Cotton
Velvet *
Cornaro
Cuddle Cloth
Eclipse *
Groove Line *
Icon *
Tweed Frieze *
Una *
G
Haze
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet *
I
Cato
Knoll Velvet
North Island
Stirling
Spinneybeck Leather
U
Vicenza *
Volo *
V
Acqua *
Andes *
Hand Tipped *
Velluto Pelle *
W
Alaska *
Amazon *
Antique *
Arizona *
Derby *
Forte *
Sabrina *
KnollStudio
X
Ducale *
Ducale Velours *
Y
Capri *
Cervo *
Copenhagen *
Cordovan *
Distressed *
Marissa *
Portofino *
Prima *
Riva *
Saddle *
Salon *
* Available on 421K and 421KS seat
cushion only.
f Available for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Harry Bertoia, 1952
Award(s):
‘‘Designer of the Year,’’ USA,
1955; Certificate of Merit,
American Institute of Architects;
Design Center Stuttgart Award, W.
Germany, 1962
Order Code
Example: 423L-C-U-K1084/9
423L Bird high back chair
C Polished Chrome
U Full cover
K1084/9 Harrison, Dunbar
Specify:
1. Pattern number
2. Finish selection
3. Upholstery option
4. Textile selection
For cushion replacement, specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Bird Lounge Chair and Ottoman
description seat h w d h
423LU Bird high back chair, full cover with
glides
textile
fabric yds.
req. leather
sq. ft. weight
14 1 /2� 38 1 /2� 33� 40 1 /4� 3.8 n/a 21 lbs.
423F Full cover replacement 3.8 n/a
424YU Ottoman, full cover with glides 14 1 /2� 23 1 /2� 17 1 /4� 14 1 /2� 1.3 n/a 9 lbs.
424F Full cover replacement 1.3 n/a
Ordering Information
Frame finishes:
Black (suffix 1)
Polished Chrome (suffix C)
White (suffix 2)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
44
Cal 133 Fire Code f:
The Bird chair and ottoman complies
with California Technical Bulletin 133
with select KnollTextiles. Specify suffix
-C at end of pattern number and suffix
-133 at end of textile selection.
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the chair and bench.
The Bertoia Bird Lounge Seating is
Greenguard certified.
Construction
Frame:
Welded steel with rods in polished
chrome or bonded rilsan, a very durable
and adhesive fused nylon-dipped finish.
Scratch, chip, and chemical resistant.
Stainless steel connections. Four plastic
glides. Frame wire diameter measures
4.5mm. Interlacement wire diameter
measures 4mm.
Upholstery:
High back chairs only available with full
cover. Full covers are stretched over wire
frame and attach to seat basket with
hooks. Full cover replacement for High
Back Chairs fit all Bertoia High Back
Chairs manufactured since 1952 within a
limited range of tolerance.

pattern no.
grades
A
COM
B C D E F G H I
423L-U $3,689. $3,836. $3,973. $4,126. $4,248. $4,338. $4,490. $4,782. $4,993.
423F-( ) 1,142. 1,274. 1,402. 1,540. 1,651. 1,735. 1,870. 2,138. 2,329.
424Y-U 1,202. 1,250. 1,294. 1,348. 1,390. 1,423. 1,469. 1,572. 1,644.
424F-( ) 481. 526. 566. 612. 653. 682. 725. 818. 884.
Approved KnollTextiles Grades/Fabric
A
Common Ground
Mariner
Presto
B
Abacus
Bank Shotf
Classic Bouclef
Field Day
Knoll Felt
Knoll Hopsack
Utmost
C
Entourage
Swing
Transition
D
Harrisonf
F
Cornaro
Cuddle Cloth
G
Haze
Ultrasuede
H
Arno
Bavaria
I
Cato
Knoll Velvet
North Island
Stirling
Check with your KnollTextiles
Representative for changes or additions.
45
KnollStudio

Designer(s):
Harry Bertoia, 1952
Award(s):
Honorable Mention, Annual
Design Awards, ID Magazine
2006
Order Code
Example: 429L-C-U-K1152/8
429L Asymmetric chaise
C Polished Chrome
U Fully upholstered
K1152/8 Stirling, Cobble
Specify:
1. Pattern number
2. Frame finish
3. Upholstery option
4. Textile selection
For seat cushion replacement specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Asymmetric Chaise
description seat h w d h
429L Asymmetric Chaise, unupholstered,
with glides
429L Asymmetric Chaise, seat pad, with
glides
textile fabric
yds. weight
52� 38 1 /2� 40 1 /4� 23 lbs.
52� 38 1 /2� 40 1 /4� 2.5 24 lbs.
429K Seat cushion replacement 2.5
429L Asymmetric Chaise, fully upholstered,
with glides
52� 38 1 /2� 40 1 /4� 4.5 22 lbs.
429F Full cover replacement 4.5
Ordering Information
Frame finishes:
Chrome (suffix C)
White (suffix 2)
Upholstery options:
Fully upholstered (suffix U)
Seat cushion only (suffix K)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
46
Outdoor Use:
With proper care and limited exposure to
the elements, the 429 Bertoia
Asymmetric chaise is appropriate for
outdoor environments. Specify rilsan
finish and vinyl seat cushion only.
Consult a Knoll representative for
appropriate upholstery options.
Cal 133 Fire Code f:
The Asymmetric chaise complies with
California Technical Bulletin 133 with
select KnollTextiles. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection.
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the Chaise.
The Bertoia Asymmetric Chaise is
Greenguard certified.
Construction
Frame:
Welded steel rods in polished chrome or
bonded white rilsan, a very durable and
adhesive fused nylon-dipped finish.
Scratch, chip and chemical resistant.
Chrome chair features chrome
connections. White rilsan chair features
stainless steel connections suitable for
outdoor use. Holes are drilled for the
glides, and are included with the Chaise.
Upholstery:
Seat cushion secured to chair with
lock-snaps. Full covers are stretched
over wire frame and attach with hooks.
Seat cushions and full covers will ship
already attached to the chaise. If
ordering a full cover replacement,
installation must be performed by Knoll
Field Services.

pattern no.
429L-( ) $8,494.
grades
A
COM
B C D E F G H I
429L-K 9,120. 9,183. 9,245. 9,312. 9,368. 9,410. 9,476. 9,607. 9,701.
429K-( ) 666. 727. 786. 850. 902. 939. 1,004. 1,125. 1,215.
429L-U 9,732. 9,847. 9,959. 10,081. 10,180. 10,254. 10,376. 10,609. 10,780.
429F-( ) 1,588. 1,698. 1,803. 1,918. 2,013. 2,081. 2,196. 2,416. 2,577.
Approved KnollTextiles Grades/Fabric
A
Mariner
Presto *
B
Bank Shotf
Classic Bouclef
Field Day *
Knoll Felt
Knoll Hopsack
Utmost
Vinyl *
C
Entourage
Swing *
Transition *
D
Harrisonf
F
Cornaro
Cuddle Cloth
Una *
G
Haze *
Ultrasuede *
H
Arno *
Bavaria
I
Knoll Velvet *
North Island
Stirling
* Available on seat cushion only.
Check with your KnollTextiles
Representative for changes or additions.
47
KnollStudio

Designer(s):
Harry Bertoia, 1952
Order Code
Example: 400Y-C1-400K-H800/24
400Y Bench
C1 Chrome frame with black
slats
400K Seat cushion
H800/24 Cato, Stone
Example: 400K-H800/19
400K Seat cushion
H800/19 Cato, Fire Red
Specify:
1. Pattern number
2. Slat finish selection
3. Seat cushion option
4. Textile selection
For seat cushion only, specify:
1. Pattern number
2. Textile selection
Harry Bertoia
Bench
description seat h w d h
textile
fabric
yds.
req.leather
sq. ft. weight
400Y Bench 15 1 /4� 72� 19� 15 1 /4� 32 lbs.
400K Seat cushion (one of maximum three) 19� 19� 2 1 /8� 1.2 15 2 lbs.
Ordering Information
Bench frame/slat finish combinations:
Chrome/black (suffix C1)
Chrome/white (suffix C2)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
48
Maintenance:
See pages 27-28.
Note:
The Knoll logo is stamped into the base
of the bench.
Construction
Bench platform:
Solid wood horizontal slats pre-treated to
help prevent sagging or warping. Slats in
black or white painted finish. Base wire
diameter measures 12mm.
Platform bench cushion available
separately: firm foam cushions
upholstered with welt detail. Three
cushions maximum per bench.

pattern no.
400Y-( ) $5,325.
grades
A
COM
B C D E F G H I
COL
U V W X Y
400K-( ) 395. 435. 473. 516. 551. 577. 618. 699. 760. 835. 937. 1,139. 1,184. 1,232.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cat’s Cradle
Common Ground
Dristi
Foil Rap
Heavy Metal
Mariner
Monarch
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Classic Boucle
Close Knit
Digit
Dovetail
Fairway
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
B continued
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Autobahn
Biota
Charm
Circa
Decade
Earthwork
Echo
Empire Stripe
English Accent
C continued
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
49
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Espana
Hand Tipped
Maremma
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Saddle
Salon
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Cini Boeri, 2008
Order Code
Example: CB2-L-K1152/1
CB2 Cini Boeri sofa
L Four standard legs
K1152/1 Stirling, Gable
Specify:
1. Pattern number
2. Leg selection
3. Textile selection
Cini Boeri
Lounge Collection
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
CB1-C Lounge chair 16 3 /8� 22 5 /16� 53 5 /8� 43 5 /8� 30 7 /16� 6.2 145 113 lbs.
CB1-L Lounge chair with four standard legs 16 3 /8� 22 5 /16� 53 5 /8� 43 5 /8� 30 7 /16� 6.2 145 113 lbs.
CB2-C Sofa 16 3 /8� 22 15 /16� 83� 43 5 /8� 30 7 /16� 7.8 200 142 lbs.
CB2-L Sofa with four standard legs 16 3 /8� 22 15 /16� 83� 43 5 /8� 30 7 /16� 7.8 200 142 lbs.
CB3 Ottoman 33� 33� 13 1 /2� 3.6 50 50 lbs.
CBP1 Large throw pillow 31� 24� 2 n/a
CBP2 Small throw pillow 24� 18� 1.6 n/a
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material in textile
appilcations is limited and no COL
leather applications are approved.
For approval requirements, processing
instructions and ordering information,
please see page 20.
Pillow:
Throw pillows for the Cini Boeri Lounge
Collection are available in two sizes.
Pillows are composed of a 50/50 blend of
recycled polyester and bamboo fiber.
Since pillow is not fitted it is available in
fabric only.
50
Maintenance:
See pages 27-28.
Note:
The Cini Boeri Lounge Collection is
Greenguard certified.
Construction
Frame:
Formed steel tubing with powder coat
finish. Finish color is Dark Grey paint
(113).
Legs:
Available with four legs or a combination
of legs and casters. Fixed locking
casters are standard on Lounge Chair
and Sofa. Swivel casters on ottoman do
not lock.
Seat Cushion:
Seat cushion is made of highly-resilient
polyurethane open-cell Cal 117 foam.
Cushion is not reversible.
Upholstery:
Textile application must be
railroaded. Textile applications
are standard with single needle top
stitch. Leather applications are standard
with double needle top stitch. Please
note that ottoman stitch detail is
applicable to top seams only; side seams
for both textile and leather are single
blind seams.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
CB1-C $6,323. $6,459. $6,608. $6,757. $6,887. $6,971. $7,126. $7,411. $7,625. $10,034. $10,792. $12,155. $12,458. $12,762.
CB1-L 6,323. 6,459. 6,608. 6,757. 6,887. 6,971. 7,126. 7,411. 7,625. 10,034. 10,792. 12,155. 12,458. 12,762.
CB2-C 8,148. 8,334. 8,539. 8,742. 8,920. 9,036. 9,249. 9,640. 9,933. 13,376. 14,421. 16,302. 16,720. 17,138.
CB2-L 8,148. 8,334. 8,539. 8,742. 8,920. 9,036. 9,249. 9,640. 9,933. 13,376. 14,421. 16,302. 16,720. 17,138.
CB3-( ) 2,278. 2,356. 2,443. 2,530. 2,605. 2,654. 2,744. 2,909. 3,034. 3,115. 3,350. 3,773. 3,868. 3,962.
CBP1-( ) 398. 438. 481. 524. 561. 586. 631. 714. 776.
CBP2-( ) 340. 379. 422. 466. 504. 528. 573. 655. 718.
Approved KnollTextiles Grade/Fabric
A
Alignment *
Bocce
Cat’s Cradle *
Common Ground
Dristi
Heavy Metal *
Mariner
Metaphor * *
Monarch *
Prep *
Presto *
Stacks *
B
Abacus *
Bank Shot
Belize *
Betwixt *
Bifold CR *
Chroma
Classic Boucle
Close Knit *
Digit *
Dovetail *
Fairway
Field Dayf
Grande *
Gusto CR *
Knoll Feltf
Knoll Hopsackf
B continued
Lyric *
Mini Stitch *
Nonchalant CR *
Paradigm *
Pogo *
Pop
Ricochetf
Spark *
Spotlight *
Starry Nightf
Triple Lace *
Utmost
Wide Angle *
Zephyr *
C
Autobahn *
Biota *
Charm *
Circa *
Cricket
Decade *
Earthworkf
Echo *
Empire Stripe *
Enmesh *
Entourage
Fable CR *
Fibra *
Fox Trot CR *
Gala *
Highline CR *
C continued
Hula Hoop *
Kaleidoscope *
Kora CR *
Legend CR *
Lore CR *
Metro *
Moto CR *
Panache CR *
Parasol *
Quark *
Regard CR *
Rio *
Roundtrip *
Sahara
Sandpiper *
Spectator *
Star Struck *
Swing
Transition *
Treble CR *
Vibe
Zari CR *
D
Cavalierf
Eclat Weave *
Harrison *
Hologram *
Masquerade *
Plain Linen
Satelite *
Satin Chisel *
Zoom *
E
Cross Stitch *
Kimono *
Luberon * *
Madison * *
Mamba *
Plus *
Whip
F
Calais Cotton
Velvet *
Century *
Coco *
Cornaro
Eclipse *
Groove Line *
Icon *
Rivington *
Topography *
Una**
51
G
Brugge *
Garden City *
Gibson *
Hampshire *
Haze
Lyon *
Spencer *
Ultrasuedef
H
Arno
Lyonese Velvet *
I
Byron * *
Cato
Galloway *
Gates
Jaipur * *
Knoll Velvet
Sandis *
Stirling
Walker *
Worth * *
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Espana
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velour
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
Saddle
Salon
* Approved for CB3 ottoman, CBP1 and
CBP2 throw pillows only.
* * Approved for CBP1 and CBP2 throw
pillows only.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Marcel Breuer, 1928
Order Code
Example: 50A-5-BE
50A-5 Cesca arm chair, cane seat
BE Ebonized frame
Example: 50C-2-K1106/8
50C-2 Cesca armless chair, fully
upholstered
K1106/8 Spencer, Apricot
Note:
Cesca chairs are part of a collection.
Please refer to the Wassily lounge chair
and Laccio tables on pages 54 and 176.
Specify:
1. Pattern number
2. Seat/back frame finish suffix
For fully upholstered specify:
1. Pattern number
2. Seat/back frame finish suffix
3. Textile selection
Marcel Breuer
Cesca Chair
description seat h arm h w d h
50A-7Arm chair, fully upholstered seat and
back
50AR-7 Replacement seat, back and arms
for 50A-7
50C-2 Armless chair, fully upholstered seat
and back
50CR-2 Replacement seat, back and arms
for 50C-2
50A-5 Arm chair, wood frame, handwoven
cane inset seat and back
50AR-5 Replacement seat, back, arms for
50A-5
50CR-1 Replacement seat and back for
50C-1
50C-1 Armless chair, wood frame
handwoven cane inset seat and back
Ordering Information
Seat and back finishes:
Clear (suffix B)
Ebonized (suffix BE)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
textile
fabric
yds.
req.
leather
sq. ft. weight
17 3 /4� 27� 23 1 /2� 23 1 /2� 31 1 /2� 1.1 20 17 lbs.
1.1 20
17 3 /4� 18 1 /2� 23 1 /2� 31 1 /2� 1.1 20 14 lbs.
1.1 20
17 3 /4� 27� 23 1 /2� 23 1 /2� 31 1 /2� 16 lbs.
17 3 /4� 18 1 /2� 23 1 /2� 31 1 /2� 11 lbs.
52
Cal 133 Fire Code f:
The Cesca chair complies with California
Technical Bulltin 133 with select
KnollTextiles. Upcharge applies, see
page 18.
Note:
The KnollStudio logo and signature of
Marcel Breuer are stamped into the base
of the chair.
The Cesca Chair is Greenguard certified.
Maintenance:
See pages 27-28.
Construction
Fully upholstered chairs:
Urethane foam over molded plywood seat
and back. Solid hardwood arms. Arms
are upholstered.
Cane inset chairs:
Hardwood beech seat/back frames and
arms with natural clear lacquer or matte
ebonized finish. Handwoven cane insets.
Frame:
1� diameter round steel tube with
chrome-plated and polished finish.
Glides:
Opaque plastic; snap-in place design.
Glides shipped with each chair for
optional in-field insertion.
Replacement seat baskets:
Cesca seat baskets can be replaced in
the field by field services or a furniture
repair specialist. Seat basket
replacements do not ship with hardware
and are not pre-drilled. They consist of
seat and back for armless chairs; seat,
back and arms for arm chair.

pattern no.
cane
seat
grades
A
COM
B C D E F G H I
COL
U V W X Y
50A-7 $1,194. $1,234. $1,270. $1,295. $1,320. $1,340. $1,364. $1,421. $1,531. $1,866. $1,995. $2,257. $2,324. $2,376.
50AR-7 698. 732. 766. 790. 814. 835. 855. 910. 1,013. 1,334. 1,459. 1,710. 1,772. 1,822.
50C-2 956. 995. 1,031. 1,055. 1,081. 1,099. 1,124. 1,183. 1,290. 1,627. 1,754. 2,018. 2,084. 2,136.
50CR-2 469. 504. 537. 562. 585. 606. 627. 682. 786. 1,106. 1,229. 1,480. 1,541. 1,594.
50A-5-B 1,852.
50A-5-BE 2,064.
50AR-5-B 1,271.
50AR-5-BE 1,481.
50CR-1-B 1,112.
50CR-1-BE 1,323.
50C-1-B 1,698.
50C-1-BE 1,904.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Common Ground
Dristi
Mariner
Prep
Presto
Stacks
B
Abacus
Bank Shot
Betwixt
Bifold CR
Chroma
Classic Boucle
Close Knit
Digit
Digital Tape
Dovetail
B continued
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Atlas
Autobahn
Biota
Charm
Circa
Cricket
Decade
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kora CR
Metro
Moto CR
Panache CR
Quark
C continued
Roundtrip
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Plain Linen
Satellite
Satin Chisel
Zoom
53
E
Cross Stitch
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Haze
Lyon
Rattan
Spencerf
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Galloway
Gates
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
f Approved for Cal 133 upholstery
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Marcel Breuer, 1925
Award(s):
The Museum of Modern Art, New
York, USA, 1968; Recognition as
‘‘Piece of Art,’’ W. Germany, 1982
Order Code
Example: 50L-3COLHH
50L Wassily chair
3COLHH Haired Hide, Tri-Colored
Note:
The Wassily Chair is part of a collection.
Please refer to Cesca side chairs and
Laccio tables on pages 52 and 176.
Specify:
1. Pattern number
2. Sling material and color selection
Marcel Breuer
Wassily Chair
description seat h arm h w d h weight
50L Wassily chair 16 1 /2� 23� 31� 27� 28 3 /4� 25 lbs.
Ordering Information
Spinneybeck Belting Leather:
Black (suffix BLBLCK)
Chocolate (suffix BL1902)
Cinammon (suffix BL1904)
Dark Mustard (suffix BL1903)
Dark Salmon (suffix BL1906)
Deep Blue (suffix BL1912)
Deep Green (suffix BL1911)
Deep Purple (suffix BL1913)
Fudge (suffix BL1901)
Key Lime (suffix BL1910)
Lemon Meringue (suffix BL1909)
Simply Red (suffix BL1905)
Sunshine (suffix BL1908)
Sweet Potato (suffix BL1907)
White (suffix BL1914)
Cowhide leather colors:
Black (suffix L80)
Light Brown (suffix L82)
White Beige (suffix L84)
54
Haired Hide:
Black (suffix BLCKHH)
Black and White (suffix BKWHHH)
Chestnut (suffix OA12HH)
Coffee (suffix O18HH)
Gold (suffix OCP5HH)
Mahogany (suffix OA19HH)
Tan (suffix OCP3HH)
Tri-Color (suffix 3COLHH)
Upholstery note:
No Customer’s Own Materials can
be used.
Replacement slings:
Knoll does not recommend replacement
slings. This procedure requires the chair
to be disassembled and rebuilt, a
complex and time consuming process.
KnollStudio 20-Day Program:
The Wassily Chair is available on the
KnollStudio 20-Day program
in Black and Simply Red Spinneybeck
belting leather. For specific information,
consult pages 29-32.

pattern no.
50L-( ) $3,108.
Cal 133 Fire Codef:
The Wassily chair complies with
California Technical Bulltin 133, see
page 18.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Marcel Breuer is stamped into the base
of the chair.
The Wassily Chair is Greenguard
certified.
Please ask your Spinneybeck
Representative for samples of the belting
leather and haired hide.
Construction
Frame:
Seamless tubular steel with a polished
chrome finish
Upholstery:
Cowhide Slings:
Thick cowhide leather slings in three
colors. Edges dyed to match for Black
and Light Brown colors. White Beige
will have edges matching Light Brown
cowhide color.
Belting Leather:
Highly durable Spinneybeck belting
leather in sixteen colors. Belting leather
edges will always match specified color.
55
Haired Hide:
Spinneybeck haired hide in eight colors.
Haired Hide is a natural material,
markings are one-of-a-kind and will vary
from piece to piece.
Glides:
Four, molded clear plastic glides with
twin-pin snap-in construction included
with each chair.
KnollStudio

Designer(s):
Don Chadwick, 2009
Award(s):
Editors’ Choice Award, Best of
NeoCon, June 2009, USA
GOOD DESIGN Award, Chicago
Athenaeum, 2009, USA
Order Code
Example: 4-C-SD-S-04-K1000/11
4-C-SD Spark stacking side chair
S Seat pad
04 Light Grey
K1000/11 Presto, Navy Blue
Specify:
1. Pattern number
2. Finish selection
3. Cal 133 Fire Code option
4. Textile selection
Finishes:
Blue (suffix 02)
Citron (suffix 03)
Dark Grey (suffix 05)
Light Grey (suffix 04)
Recycled Black (suffix 06)
Red (suffix 01)
Note:
Spark colors Red, Blue and Citron
coordinate with KnollStudio Maya Lin
Stones in Warm Red, Blue and
Chartreuse finishes.
Don Chadwick
Spark Series
description seat h w d h
textile fabric
yds. weight
4-C-SD-N Spark stacking side chair 18� 20 1 /2� 22� 31� 0.75 10 lbs.
4-C-SD-S Spark stacking side chair, with
seat pad
4SDSEAT Seat pad replacement for
4-C-SD-S
17� 20 1 /2� 22� 31� 0.75 10 lbs.
4-C-LG-N Spark stacking lounge chair 17� 25 1 /2� 25 1 /2� 30 1 /2� 0.80 14 lbs.
4-C-LG-S Spark stacking lounge chair, with
seat pad
4LGSEAT Seat pad replacement for
4-C-LG-S
17� 25 1 /2� 25 1 /2� 30 1 /2� 0.80 14 lbs.
4DOLLY Spark stacking dolly 25� 43� 30 1 /4� 19 lbs.
4GA Spark ganging mechanism for side
chair
Ordering Information
Maintenance:
See pages 27-28.
Cal 133 Fire Code f:
The Spark stacking side and lounge chair
complies with Cal 133 fire code in
selected upholstery. Unupholstered
chairs are not Cal 133 approved. Specify
suffix -C at end of pattern number and
suffix -133 at end of textile selection.
Upcharge applies, see page 21.
KnollStudio 20-Day Program:
Spark side and lounge chairs with no
upholstery is available on the 20-day
program in all finishes. For specific
ordering information consult pages
29-29.
56
Note:
The Spark Series is Greenguard
certified. The Spark Series is
Greenguard Children & Schools
certified.
Upholstery/COM information:
Prices shown include fabric upholstery.
Contact your Knoll representative for
colors. Only approved KnollTextiles may
be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Recycled Content:
The Recycled Black color of both the
non-upholstered side chair and the
non-upholstered lounge chair contain
40% post-industrial recycled content.
Recycled content percentages for the
Reycled Black chairs with seat pads will
vary depending on the fabric used. All
other finishes do not contain recycled
content.
Construction
Frame:
Integrally colored, textured, glass
reinforced polyproylene; approved for
indoor and out door use.
Seat Pad:
Molded highly-resilient polyurethane
foam with textile cover and steel fastners;
approved for indoor use only.
Stacking:
Spark side and lounge chairs stack up to
6 units high on the floor and 10 units
high on the Spark dolly, which can
accomodate the side or lounge chair.
The dolly stacked with 10 side chairs
measures 54� high and with 10 lounge
chairs measures 53� high.
Dolly:
Tubular metal frame with textured
powder coat finish, four handles made of
black thermoplastic elastomer (TPE) that
ast as bumpers to cushion the chairs, and
four locking casters.

pattern no. unuphol.
4-C-SD-N $245.
base
grade
grades
A
COM
B C D E F G H I
4-C-SD-S-( ) 340. 362. 378. 393. 406. 423. 435. 450. 483. 509.
4SDSEAT 135. 157. 173. 188. 201. 218. 230. 245. 278. 304.
4-C-LG-N 380.
4-C-LG-S-( ) 475. 497. 513. 528. 541. 558. 570. 585. 618. 644.
4LGSEAT 145. 167. 183. 198. 211. 228. 240. 255. 288. 314.
4DOLLY 350.
4GA 7.
Ganging Device:
Semi-translucent TPE. The Spark
ganging device adjoins the Spark side
chairs’ back legs. Position the ganging
device so the raised surface in the
middle of the device faces toward the
front of the chair. The angle of the
device should mirror the angle of the
chair’s back legs.
Presto- Base Grade Fabric
Seat pad fabric colors:
K1000/1 Presto, Winter White
K1000/2 Presto, Sand
K1000/3 Presto, Stone
K1000/4 Presto, Saffron
K1000/5 Presto, Spring Green
K1000/6 Presto, Blue Chip
K1000/7 Presto, Scarlet
K1000/8 Presto, Red Carpet
K1000/9 Presto, Beige Taupe
K1000/10 Presto, Olive
K1000/11 Presto, Navy Blue
K1000/12 Presto, Clear Gray
K1000/13 Presto, Charcoal Gray
K1000/14 Presto, Black Tie
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Cat’s Cradlef
Common Groundf
Dristi
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shotf
Belize
Betwixtf
Chromaf
Close Knit
Digit
Dovetailf
Fast Forward
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
Mini Stitchf
B continued
Night Life
Paradigm
Pogof
Pop
Ransom
Ricochetf
Sparkf
Spotlight
Starry Nightf
Utmost
Zephyr
C
Atlas
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
English Accent
Enmeshf
Entouragef
Fable CR
Fibra
Fox Trot CR
57
C continued
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Panache CR
Parasol
Pony Up
Quarkf
Rio
Roundtripf
Sandpipier
Sequin CR
Smart
Spectatorf
Spot On
Star Struck
Stepping Stones
Swing
Transitionf
Trable CR
Vibe *
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerede
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitchf
Kimono
Luberon
Mamba
Plus
Whip
F
Century
Coco
Cornaro
Cuddle Cloth
Groove Line
Icon
Rivington
Topography
Una
G
Gibson
Haze
Rattan
Ultrasuedef
H
Arnof
Lyonese Velvet
KnollStudio
f Approved for Cal 133 upholstery.
* Approved for Spark side chair only
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Pepe Cortés, 1993
Order Code
Example: 30C-A
30C Jamaica barstool, bar height
A Aluminum
Specify:
1. Pattern number
2. Finish selection
Pepe Cortés
Jamaica Barstool
description seat h w d h type weight
30C Jamaica Barstool, bar height 30� 20� 20� 32� aluminum
seat
11 lbs.
30� 20� 20� 32� nylon seat 10 lbs.
11 lbs.
26� 17
seat
1 /2� 17 1 /2� 28 1 /4� nylon seat 9 lbs.
30C2 Jamaica Barstool, counter height 26� 17 1 /2� 17 1 /2� 28 1 /4� aluminum
30C3 Jamaica Barstool, low, on casters 19� 19� 17 3 /4� 10 lbs.
Ordering Information
Finishes:
Aluminum (suffix A)
Black nylon (suffix BKN)
White nylon (suffix WTN)
Note:
Available in the United States only.
KnollStudio 20-Day Program:
The Jamaica bar and counter height
stools in aluminum finish are available
on the 20-day program. For specific
information, consult pages 29-32.
58
Outdoor use:
The Jamaica Stool is approved for indoor
use only.
Cal 133 Fire Codef:
The Jamaica Stool in aluminum finish
comply with California Technical
Bulletin 133. See page 18.
Maintenance:
See pages 27-28.
Note:
The Jamaica Barstool is Greenguard
certified.

pattern no.
30C-A $1,137.
30C-(BKN, WTN) 870.
30C2-A 1,137.
30C2-(BKN, WTN) 870.
30C3-A 1,106.
Construction
Seat and Frame
Contoured seat swivels 360°.
Constructed of anodized aluminum or
impact modified nylon. Base is chrome
plated steel with plastic glides.
The Jamaica aluminum stools on glides
are 100% recyclable.
Jamaica Barstool is manufactured in
Spain by Amat-3.
59
KnollStudio

Designer(s):
Jonathan Crinion, 1999
Award(s):
FX International Interior Design
Award, 1999
Order Code
Example: 58A-BB-K715/3
58A Crinion arm chair
B323 Medium Walnut
K715/3 Abacus, Gold Coin
Specify:
1. Pattern number
2. Finish selection
3. Textile selection
Jonathan Crinion
Crinion Chair
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
58A Arm chair, upholstered seat 17 1 /2� 26 1 /2� 23 1 /4� 19 1 /2� 30 3 /4� 0.7 13 18 lbs. beech
stains
17 1 /2� 26 1 /2� 23 1 /4� 19 1 /2� 30 3 /4� 0.7 13 17 lbs. maple
58C Armless chair, upholstered seat 17 1 /2� 20 1 /2� 19 1 /2� 30 1 /4� 0.7 13 16 lbs. beech
stains
17 1 /2� 20 1 /2� 19 1 /2� 30 1 /4� 0.7 13 15 lbs. maple
58A-R Seat pad replacement, for arm chair
with upholstered seat 58A
58C-R Seat pad replacement, for armless
chair with upholstered seat 58C
Ordering Information
Clear Maple finish:
European Maple (suffix EKC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
60
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. Complementary finishes are
available at no upcharge. If no
complementary standard finish is
available, please refer to custom finish
policy below.
Custom finishes:
To complement non-Knoll wood veneer
or lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Cal 133 Fire Codef:
Crinion Chairs with upholstered seat
comply with California Technical
Bulletin 133 in selected upholstery.
Specify suffix -C at end of pattern
number and suffix -133 at end of textile
selection. Upcharge applies, see page
18.
Maintenance:
See pages 27-28.
Note:
The Crinion Chair is Greenguard
certified.
0.7 13
0.7 13
Construction
Frame:
Clear Maple Chair: Select clear
European maple hardwood frame with
maple plywood back panel in clear
finish. Dowel, mortise and tenon
construction. Arm supported by metal
cross dowel.
Maple option on the Crinion chair is
manufactured in Europe using European
maple. European Maple (EKC) has more
white/yellow tones than the North
American Maple which tends to be more
pink.
Beech Chair: Select beech hardwood
frame with plywood back panel in clear
or stained finishes. Arm supported by
metal cross dowel.
Seat pad:
Upholstered, high-density polyurethane
foam seat pad on a plywood seat basket
with Dymetrol� suspension. Seat pad
reaches to the seat frame edge, surrounds
arm.
Seat pad replacement:
Seat pad can be replaced in the field.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
High Traffic Areas:
When specifying armless chair in high
use or high traffic areas, we recommend
the use of a stretcher for added strength.
Contact CPD or your KnollStudio sales
representative for more information.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
58A-( ) $1,348. $1,374. $1,397. $1,425. $1,446. $1,462. $1,491. $1,539. $1,581. $1,711. $1,806. $1,998. $2,037. $2,084.
58A-(EKC) 1,651. 1,677. 1,700. 1,728. 1,749. 1,765. 1,794. 1,842. 1,884. 2,014. 2,109. 2,301. 2,340. 2,387.
58C-( ) 1,148. 1,175. 1,200. 1,224. 1,250. 1,263. 1,288. 1,342. 1,380. 1,511. 1,604. 1,796. 1,838. 1,881.
58C-(EKC) 1,366. 1,392. 1,417. 1,441. 1,467. 1,481. 1,506. 1,559. 1,598. 1,728. 1,821. 2,014. 2,056. 2,098.
58A-R-( ) 224. 251. 271. 297. 318. 331. 359. 407. 442. 564. 655. 837. 876. 918.
58C-R-( ) 224. 251. 271. 297. 318. 331. 359. 407. 442. 564. 655. 837. 876. 918.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Common Groundf
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Bifold CR
Chromaf
Classic Boucle
Close Knit
Digit
Digital Tape
Dovetailf
Fast Forward
Field Dayf
B continued
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
C continued
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Posh
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
Smart
Star Struck
Stepping Stones
Spectator
Swing
Transitionf
C continued
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Luberon
Madison
Mamba
Plus
Whip
61
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Fortef
Sabrinaf
X
Ducalef
Ducale Veloursf
KnollStudio
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressed
Marissaf
Portofino
Primaf
Rivaf
f Available for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Joseph Paul D’Urso, 2008
Order Code
Example: 2160-C-H800/40
2160 D’Urso Contract Lounge
Collection, lounge chair
C Polished Chrome legs
H800/40 Cato, Orange
Example: 2161-C-S-HT1502-
K1206/6
2161 D’Urso Contract Lounge
Collection, small sofa
C Polished Chrome legs
S Split upholstery
HT1502 Surround in Hand Tipped,
Mesa Verde
K1206/6 Cushions in Knoll Hopsack,
Gold
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Specify with split upholstery:
1. Pattern number
2. Leg finish
3. Split upholstery option
4. Textile selection, Surround
5. Textile selection, Cushions
Joseph Paul D’Urso
Contract Lounge Seating
description w d h seat h arm h type
2160 Contract Lounge chair, same
upholstery, frame and cushions
2160 Contract Lounge chair, combination
upholstery, frame and cushions
2161 Contract Small Sofa, same upholstery,
frame and cushions
2161 Contract Small Sofa, combination
upholstery, frame and cushions
2163 Contract Ottoman, same upholstery,
frame and cushions
2163 Contract Ottoman, combination
upholstery, frame and cushions
textile
fabric
yds.
leather
sq ft weight
34� 36 1 /2� 30 1 /2� 17 3 /8� 22 5 /8� 7.6 105 70 lbs.
34� 36 1 /2� 30 1 /2� 17 3 /8� frame
uph.
4.6 60
upchg,
cushions
3.2 50
77� 36 1 /2� 30 1 /2� 17 3 /8� 22 5 /8� 13.5 215 135 lbs.
77� 36 1 /2� 30 1 /2� 17 3 /8� frame
uph.
6.5 95
upchg,
cushions
7 120
28 1 /2� 28 1 /2� 16� 16� 3.5 45 29 lbs.
28 1 /2� 28 1 /2� 16� 16� frame
uph.
upchg.
cushions
1.4 15
2.8 30
2161P Optional side cushion for small sofa 17� 3� 11� 1 n/a 5 lbs.
Ordering Information
Leg finishes:
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown includes fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
62
Construction
Frame:
Constructed of plywood with sinuous
spring seat suspension and matrix back
suspension. Standard lounge chair and
small sofa depth if 36�; residential sofa is
40� deep.
Upholstery:
One seat and back cushion for the
Lounge Chair, two seat and back
cushions for the Small Sofa, one
semi-attached cushion for Ottoman. For
units with combination upholstery, add
list price of surround in appropriate
grade with the list price of cushions to
obtain total list price for item.
Railroad upholstery application is
standard for all non-directional textiles.
Please see ’Stitching’ for seam details.
Cushions:
Seat cushions constructed of highly
resilient polyurethane foam and
polyester fiber, wrapped in polyester
fiber batting. Back cushion constructed
with a soft polyurethane foam core and
polyester fiber fill. A firmer contract
seat cushion provides more support,
whereas the residential seat cushion
provides a more relaxed, softer seat.
Side cushion constructed of 10/90 down
with a down proof ticking.
Leather cushions feature a perforated
zipper breather panel.
Stitching:
Non-directional textiles with railroad
application, single needle topstitch for
arms, double needle topstitch for seat
and back cushions; directional textiles,
single needle topstitch for arms, double
needle topstitch for seat and back
cushions, single blind stitch for vertical
seams of seat cushion, a vertical single
blind center seam joins inside and
outside back panels of the sofa; leather,
single needle topstitch for arms, double
needle topstitch for seat and back
cushions, single blind stitch for vertical
seams of seat cushion, a vertical double
needle topstitch seam joins inside and
outside back panels of sofa. Ottoman; all
applications, double needle topstitch for
horizontal cushion seams, single blind
seam for vertical seams of seat cushion.
Legs:
6� Cold rolled steel leg, 1 1 /4� diameter,
available in polished chrome with black
nylon glides.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
2160-C-( ) $3,590. $3,750. $3,902. $4,069. $4,206. $4,305. $4,472. $4,791. $5,027. $6,083. $6,522. $7,414. $7,600. $7,816.
2160S-C-( )-( ) 2,739. 2,861. 2,977. 3,105. 3,209. 3,285. 3,412. 3,656. 3,835. 4,365. 4,695. 5,366. 5,505. 5,668.
upchg,
cushions
1,174. 1,226. 1,276. 1,331. 1,375. 1,408. 1,462. 1,567. 1,644. 1,871. 2,012. 2,300. 2,359. 2,429.
2161-C-( ) 5,667. 5,950. 6,220. 6,517. 6,760. 6,936. 7,233. 7,800. 8,218. 10,713. 11,612. 13,439. 13,820. 14,263.
2161S-C-( )-( ) 4,324. 4,540. 4,746. 4,972. 5,158. 5,292. 5,518. 5,951. 6,270. 7,687. 8,331. 9,643. 9,916. 10,233.
upchg,
cushions
1,853. 1,946. 2,034. 2,131. 2,211. 2,268. 2,365. 2,550. 2,687. 3,294. 3,571. 4,133. 4,250. 4,386.
2163-C-( ) 2,162. 2,250. 2,334. 2,426. 2,502. 2,557. 2,649. 2,825. 2,956. 3,357. 3,545. 3,927. 4,007. 4,100.
2163S-C-( )-( ) 1,649. 1,717. 1,781. 1,851. 1,909. 1,951. 2,021. 2,156. 2,255. 2,409. 2,544. 2,818. 2,875. 2,942.
upchg,
cushions
707. 736. 763. 793. 818. 836. 866. 924. 966. 1,032. 1,090. 1,208. 1,232. 1,261.
2161P-( ) 399. 420. 440. 462. 480. 493. 515. 557. 588.
Approved KnollTextiles Grades/Fabrics
A
Alignmentf
Bocce
Cat’s Cradle
Common Ground
Dristi
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shotf
Belize
Betwixtf
Bifold CR
Chroma
Classic Bouclef
Digit
Fairway
Field Dayf
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochetf
B continued
Sparkf
Spotlight
Starry Nightf
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworksf
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
C continued
Lore CR
Metro
Moto CR
Panache CR
Parasol
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Spectator *
Star Struck
Stepping Stones
Swing
Transitionf
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerade
Obi
Plain Linen
Satelite
Satin Chisel
Zoom
E
Cross Stitchf
Kimono
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuedef
63
H
Arnof
Lyonese Velvet
I
Byron
Cato
Galloway
Gates
Knoll Velvet
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Espanaf
Hand Tippedf
W
Alaskaf
Amazonf
Antiquef
Arizona
Derbyf
Fortef
Sabrinaf
* Approved for 2161P only.
KnollStudio
X
Ducale
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
Check with your KnollTextiles or
Spinneybeck Representative for additions
or changes.

Designer(s):
Joseph Paul D’Urso, 2008
Order Code
Example: 2160R-OE-K162/25
2160R D’Urso Residential Lounge
Collection, lounge chair
OE Ebonized legs
K162/25 Classic Boucle, Aegean
Example: 21623R-0313-S-K1152/8-
K1024/3
2163R D’Urso Residential Lounge
Collection, ottoman
0313 Burnt Walnut legs
S Split upholstery
K1152/8 Surround in Stirling, Cobble
K1024/3 Cushions in Coco, Ciel
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Specify with split upholstery:
1. Pattern number
2. Leg finish
3. Split upholstery option
4. Textile selection, Surround
5. Textile selection, Cushions
Joseph Paul D’Urso
Residential Lounge Seating
description w d h seat h arm h type
2160R Residential Lounge chair, same
upholstery, frame and cushions
2160R Residential Lounge chair,
combination upholstery, frame and cushions
2162R Residential Sofa, same upholstery,
frame and cushions
2162R Residential Sofa, combination
upholstery, frame and cushions
2163R Residential Ottoman, same
upholstery, frame and cushions
2163R Residential Ottoman, combination
upholstery, frame and cushions
2162P Optional side cushion for residential
sofa
Ordering Information
Leg finishes:
Burnt Walnut on Oak (suffix 0313)
Clear Oak (suffix OC)
Ebonized on Oak (suffix OE)
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown includes fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTexyiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
textile
fabric
yds.
leather
sq ft. weight
34� 36 1 /2� 28 1 /2� 15 3 /8� 20 5 /8� 7.6 105 67 lbs.
34� 36 1 /2� 28 1 /2� 15 3 /8� frame
uph.
4.6 60
upchg,
cushions
3.2 50
90� 40 1 /2� 28 1 /2� 15 3 /8� 20 5 /8� 14 250 151 lbs.
90� 40 1 /2� 28 1 /2� 15 3 /8� frame
uph.
6.7 110
upchg,
cushions
7.7 145
28 1 /2� 28 1 /2� 14� 14� 3.5 45 26 lbs.
28 1 /2� 28 1 /2� 14� 14� frame
uph.
1.4 15
upchg,
cushions
2.8 30
21� 5� 11� 1 n/a 6 lbs.
64
Construction
Frame:
Constructed of plywood with sinuous
spring seat suspension and matrix back
suspension. Standard lounge chair and
sofa depth if 36�; residential sofa is 40�
deep.
Upholstery:
One seat and back cushion for the
Lounge Chair, two seat and back
cushions for the Sofa, one semi-attached
cushion for Ottoman. For units with
combination upholstery, add list price of
surround in appropriate grade with the
list price of cushions to obtain total list
price for item.
Railroad upholstery application is
standard for all non-directional textiles.
Please see ’Stitching’ for seam details.
Cushions:
Seat cushions constructed of highly
resilient polyurethane foam and
polyester fiber, wrapped in polyester
fiber batting. Back cushion constructed
with a soft polyurethane foam core and
polyester fiber fill. A firmer contract
seat cushion provides more support,
whereas the residential seat cushion
provides a more relaxed, softer seat.
Side cushion constructed of 10/90 down
with a down proof ticking.
Leather cushions feature a perforated
zipper breather panel.
Stitching:
Non-directional textiles with railroad
application, single needle topstitch for
arms, double needle topstitch for seat
and back cushions; directional textiles,
single needle topstitch for arms, double
needle topstitch for seat and back
cushions, single blind stitch for vertical
seams of seat cushion, a vertical single
blind center seam joins inside and
outside back panels of the sofa; leather,
single needle topstitch for arms, double
needle topstitch for seat and back
cushions, single blind stitch for vertical
seams of seat cushion, a vertical double
needle topstitch seam joins inside and
outside back panels of sofa. Ottoman; all
applications, double needle topstitch for
horizontal cushion seams, single blind
seam for vertical seams of seat cushion.
Legs:
4� Cold rolled steel leg, 1 1 /4� diameter,
available in polished chrome with black
nylon glides, or 4� turned solid oak leg
available in natural oak, medium walnut
on oak and ebonized oak with white
nylon glides.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
2160R-( )-( ) $3,590. $3,750. $3,902. $4,069. $4,206. $4,305. $4,472. $4,791. $5,027. $6,083. $6,522. $7,414. $7,600. $7,816.
2160RS-( )-( )-( ) 2,739. 2,861. 2,977. 3,105. 3,209. 3,285. 3,412. 3,656. 3,835. 4,365. 4,695. 5,366. 5,505. 5,668.
upchg,
cushions
1,174. 1,226. 1,276. 1,331. 1,375. 1,408. 1,462. 1,567. 1,644. 1,871. 2,012. 2,300. 2,359. 2,429.
2162R-( )-( ) 6,948. 7,250. 7,538. 7,855. 8,114. 8,301. 8,618. 9,223. 9,669. 12,830. 13,875. 16,000. 16,442. 16,957.
2162RS-( )-( )-( ) 5,301. 5,532. 5,751. 5,993. 6,191. 6,334. 6,576. 7,037. 7,378. 9,205. 9,955. 11,480. 11,797. 12,167.
upchg,
cushions
2,272. 2,371. 2,465. 2,569. 2,653. 2,714. 2,818. 3,016. 3,162. 3,945. 4,266. 4,920. 5,056. 5,214.
2163R-( )-( ) 2,162. 2,250. 2,334. 2,426. 2,502. 2,557. 2,649. 2,825. 2,956. 3,357. 3,545. 3,927. 4,007. 4,100.
2163RS-( )-( )-( ) 1,649. 1,717. 1,781. 1,851. 1,909. 1,951. 2,021. 2,156. 2,255. 2,409. 2,544. 2,818. 2,875. 2,942.
upchg,
cushions
707. 736. 763. 793. 818. 836. 866. 924. 966. 1,032. 1,090. 1,208. 1,232. 1,261.
2162P-( ) 399. 420. 440. 462. 480. 493. 515. 557. 588.
Approved KnollTextiles Grade/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Ground
Dristi
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shotf
Belize
Betwixtf
Bifold CR
Chroma
Classic Bouclef
Digit
Fairway
Field Dayf
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochetf
B continued
Sparkf
Spotlight
Starry Nightf
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworksf
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
C continued
Lore CR
Metro
Moto CR
Panache CR
Parasol
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Spectator *
Star Struck
Stepping Stones
Swing
Transitionf
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerade
Obi
Plain Linen
Satelite
Satin Chisel
Zoom
E
Cross Stitchf
Kimono
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuedef
65
H
Arnof
Lyonese Velvet
I
Byron
Cato
Galloway
Gates
Knoll Velvet
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Espanaf
Hand Tippedf
W
Alaskaf
Amazonf
Antiquef
Arizona
Derbyf
Fortef
Sabrinaf
* Approved for 2162P only.
KnollStudio
X
Ducale
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
Check with your KnollTextiles and
Spinneybeck Representative for additions or
changes.

Designer(s):
Joseph Paul D’Urso, 2008
Order Code
Example: 2165-AP-K1320/4
2165 Joseph Paul D’Urso Swivel
lounge
AP Polished Aluminum
K1320/4 Cornaro, Tabasco
Note:
The Joseph Paul D’Urso Swivel lounge
chair is part of a collection. Please refer
to the Joseph Paul D’Urso Lounge and
Table Collections on pages 62, 64, 178,
180 and 184.
Specify:
1. Pattern number
2. Frame finish
3. Textile selection
Joseph Paul D’Urso
Swivel Lounge Seating
description
seat h,
min
seat h,
max w d h, min h, max
textile
fabric
yds.
req.
leather
sq. ft. weight
2165 Swivel Lounge chair 17� 20� 32� 30� 25 3 /4� 28 3 /4� 4.25 n/a 52 lbs.
Ordering Information
Frame finish:
Polished Aluminum (suffix AP)
Textured Black (suffix TB)
Warm White (suffix WW)
Upholstery/COM information:
Prices shown include fabric upholstery.
Contact your Knoll representative for
colors. Only approved KnollTextiles may
be ordered.
Customer’s Own Material in textile
applications is limited.
For approval requirements, processing
instructions and ordering information
please see page 20.
66
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Joseph Paul D’Urso are located on the
underside of chair.
Construction
Frame:
Inner frame of solid wood and bent
laminate plywood.
Base:
Die cast aluminum base available in
polished aluminum or powder coat paint
finish.
Upholstery:
Textile application must be railroaded.
Urethane foam with polyester top layer
wraps interior frame and a fully
upholstered panel surrounds chair.
Cushion:
Urethane foam with polyester fiber wrap.
Case with a single needle-top stitch
detail.
Control:
360° Swivel mechanism with pneumatic
seat height adjustment, cable operated
with a low profile lever, flush mounted on
the underside of the chair.

pattern no.
grades
A
COM
B C D E F G H I
2165-( )-( ) $2,626. $2,715. $2,800. $2,894. $2,970. $3,025. $3,119. $3,297. $3,429.
67
Approved KnollTextiles Grades/Fabrics
A
Mariner
B
Bankshot
Classic Boucle
Field Day
Knoll Felt
Knoll Hopsack
F
Coco
Cornaro
Cuddle Cloth
Rivington
H
Arno
Bavaria
I
Cato
North Island
Stirling
KnollStudio
Check with your KnollTextiles
Representative for changes or additions.

Designer(s):
Raul de Armas, 1991
Order Code
Example: 38A-B319-K787/174
38A de Armas arm chair,
upholstered seat
B319 Medium Cherry
K787/174 Calais Cotton Velvet, Black
Plum
Specify:
1. Pattern number
2. Finish selection
3. Cal 133 Fire Code option
4. Textile selection
Ordering Information:
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Raul de Armas
de Armas Chair
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
38A Arm chair, upholstered seat, no welt
38AW Arm chair, upholstered seat, with welt
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 0.7 13 16 lbs. maple
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 17 lbs. other
finishes
38AW-U Arm chair, fully upholstered, with
welt
38C Armless chair, upholstered seat, no welt
38CW Armless chair, upholstered seat, with
welt
38CW-U Armless chair, fully upholstered,
with welt
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 17 lbs. maple
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 18 lbs. other
finishes
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 0.7 13 15 lbs. maple
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 15 lbs. other
finishes
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 16 lbs. maple
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 16 lbs. other
finishes
38R Seat basket replacement 0.7 13
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. Complimentary finishes are
available at no upcharge. If no
complementary standard finish is
available, please refer to custom finish
policy below.
Custom finishes:
To complement non-Knoll wood veneer
or lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
68
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Cal 133 Fire Code f:
The de Armas Chairs comply with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.
Maintenance:
See pages 27-28.
Note:
The de Armas Chair is Greenguard
certified.
Construction
Frame:
Select clear maple hardwood in clear
finish or select beech hardwood in
stained finish.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
Seat:
Highly elastic woven membrane
suspension with polyurethane foam
insert.
Upholstery:
Inset seat available with optional welt
detail. Fully upholstered features inset
back with welt detail.
Glides:
Recessed plastic glides.
High Traffic Areas:
When specifying armless chair in high
use or high traffic areas, we recommend
the use of a stretcher for added strength.
Contact CPD or your KnollStudio sales
representative for more information.

pattern no.
38A-KC or
38AW-KC
38A-( ) or
38AW-( )
grades
A
COM
B C D E F G H I
COL
U V W X Y
$1,248. $1,268. $1,291. $1,305. $1,319. $1,333. $1,347. $1,383. $1,444. $1,585. $1,669. $1,834. $1,871. $1,909.
1,137. 1,157. 1,180. 1,194. 1,208. 1,223. 1,236. 1,272. 1,333. 1,474. 1,558. 1,723. 1,760. 1,798.
38AW-U-KC 1,866. 1,902. 1,936. 1,975. 2,004. 2,027. 2,065. 2,137. 2,190. 2,396. 2,524. 2,786. 2,841. 2,903.
38AW-U-( ) 1,702. 1,738. 1,772. 1,811. 1,840. 1,863. 1,901. 1,973. 2,026. 2,232. 2,360. 2,622. 2,677. 2,739.
38C-KC or
38CW-KC
38C-( ) or
38CW-( )
1,181. 1,203. 1,227. 1,240. 1,255. 1,268. 1,284. 1,318. 1,380. 1,523. 1,605. 1,770. 1,804. 1,844.
1,074. 1,096. 1,120. 1,134. 1,148. 1,161. 1,178. 1,211. 1,274. 1,416. 1,499. 1,664. 1,697. 1,738.
38CW-U-KC 1,679. 1,714. 1,748. 1,786. 1,817. 1,839. 1,878. 1,948. 2,003. 2,214. 2,342. 2,592. 2,660. 2,721.
38CW-U-( ) 1,532. 1,566. 1,601. 1,639. 1,670. 1,692. 1,731. 1,801. 1,856. 2,067. 2,195. 2,444. 2,512. 2,574.
38R-( ) 348. 368. 392. 405. 421. 433. 447. 483. 543. 688. 770. 935. 971. 1,009.
Approved KnollTextiles Grades/Fabric
A
Alignment *f
Analogy *
Bocce *
Cat’s Cradle *
Common
Ground *f
Dristi *
Foil Rap *
Heavy Metal *
Mariner *
Metaphor *
Monarch *
Prep *f
Presto *f
Stacks *
B
Abacus *f
Backdrop * *
Bank Shot *
Belize *
Betwixt *f
Bifold CR *
Chroma *f
Classic Boucle *
Close Knit *
B continued
Digit *
Dovetail *f
Fairway *
Fast Forward * *
Field Day *f
Forza *
Grande *
Gusto CR * *
Knoll Felt *
Knoll Hopsack *
Lyric *
Mini Stitch *f
Night Life *
Nonchalant CR *
Paradigm *
Pogo *f
Pop *
Ricochet *f
Spark *f
Spotlight *
Starry Night *f
Techno Tweed *
B continued
Triple Lace *
Utmost *
Vinyl *
Wide Angle *f
Zephyr *
C
Atlas *
Autobahn *
Biota *
Charm *
Circa *
Cricket *
Decade *
Earthwork *
Echo *
Empire Stripe *
English Accent *
Enmesh *f
Entourage *
Fable CR *
Fibra *
Fox Trot CR *
Gala *f
Highline CR *
Hula Hoop *
Kaleidoscope CR *
C continued
Kora CR *
Legend CR *
Lore CR *
Metro *
Moto CR *
Panache CR *
Parasol * *
Posh *
Quark *
Regard CR *
Rio *
Roundtrip *
Sahara *
Sandpiper * *
Sequin CR *
Smart *
Spectator *
Star Struck *
Stepping Stones *
Swing *
Transition *f
Treble CR *
Vibe *
Zari CR *
D
Cavalier *
Compass CR *
Eclat Weave *
Harrison *
Hologram *
In The Loop * *
69
D continued
Masquerade *
Obi *
Plain Linen *
Satellite *
Satin Chisel *
Zoom *f
E
Cross Stitch *
Kimono *
Luberon *
Madison *
Mamba *
Plus *
Whip *
F
Calais Cotton
Velvet *
Century *
Coco * *
Cornaro *
Cuddle Cloth *
Eclipse *
Groove Line *
Icon *
Rivington *
Topography *
Tweed Frieze *
Una *
G
Brugge * *
Garden City *
Gibson *
Hampshire * *
Haze *
Lyon *
Rattan *
Spencer *f
Ultrasuede *f
H
Arno *
Bavaria * *
Lyonese Velvet *
I
Byron *
Canaan *
Cato * *
Cummings *
Galloway *
Gates *
Jaipur *
Knoll Velvet *f
Mepal *
North Island * *
Sandis *
Stirling *
Walker *
Worth * *
Spinneybeck Leather
U
Vicenza *f
Volo *f
V
Acqua *f
Andes *f
España*f
Hand Tipped
Velluto Pelle *f
W
Alaska *f
Amazon *f
Antique *f
Arizona *f
Derbyf
Forte *f
Sabrina *f
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Capri *f
Cervo *
Copenhagen *f
Cordovan *f
Distressed *f
Marissaf
Portofino
Prima *f
Riva *f
Saddlef
Salonf
* Approved for fully upholstered
versions.
* * Approved for seat pad with no
welting only.
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Raul de Armas, 2000
Order Code
Example: 41A-B319-K787/174
41A de Armas arm chair
B319 Medium Cherry
K787/174 Calais Cotton Velvet, Black
Plum
Specify:
1. Pattern number
2. Finish selection
3. Cal 133 Fire Code option
4. Textile selection
Ordering Information:
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Raul de Armas
Vertical de Armas Chair
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
41A Arm chair, upholstered seat, no welt
41AW Arm chair, upholstered seat, with welt
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 0.7 13 16 lbs. maple
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 17 lbs. other
finishes
41AW-U Arm chair, fully upholstered, with
welt
41C Armless chair, upholstered seat, no welt
41CW Armless chair, upholstered seat, with
welt
41CW-U Armless chair, fully upholstered,
with welt
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 17 lbs. maple
17 1 /2� 25 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 18 lbs. other
finishes
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 0.7 13 16 lbs. maple
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 15 lbs. other
finishes
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 17 lbs. maple
17 1 /2� 21 1 /4� 22 1 /2� 33 1 /2� 1.25 22.5 16 lbs. other
finishes
41R Seat basket replacement 0.7 13
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. Complementary finishes are
available at no upcharge. If no
complementary standard finish is
available, please refer to custom finish
policy below.
Custom finishes:
To complement non-Knoll wood veneer
or lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
70
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Cal 133 Fire Code f:
The de Armas Chairs comply with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.
Maintenance:
See pages 27-28.
Note:
The Vertical de Armas Chair is
Greenguard certified.
Construction
Frame:
Select clear maple hardwood in clear
finish or select beech hardwood in
stained finish.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
Seat:
Highly elastic woven membrane
suspension with polyurethane foam
insert.
Upholstery:
Inset seat available with optional welt
detail. Fully upholstered features inset
back with welt detail.
Glides:
Recessed plastic glides.
High Traffic Areas:
When specifying armless chair in high
use or high traffic areas, we recommend
the use of a stretcher for added strength.
Contact CPD or your KnollStudio sales
representative for more information.

pattern no.
41A-KC or
41AW-KC
41A-( ) or
41AW-( )
grades
A
COM
B C D E F G H I
COL
U V W X Y
$1,248. $1,268. $1,291. $1,305. $1,319. $1,333. $1,347. $1,383. $1,444. $1,585. $1,669. $1,834. $1,871. $1,909.
1,137. 1,157. 1,180. 1,194. 1,208. 1,223. 1,236. 1,272. 1,333. 1,474. 1,558. 1,723. 1,760. 1,798.
41AW-U-KC 1,866. 1,902. 1,936. 1,975. 2,004. 2,027. 2,065. 2,137. 2,190. 2,396. 2,524. 2,786. 2,841. 2,903.
41AW-U-( ) 1,702. 1,738. 1,772. 1,811. 1,840. 1,863. 1,901. 1,973. 2,026. 2,232. 2,360. 2,622. 2,677. 2,739.
41C-KC or
41CW-KC
41C-( ) or
41CW-( )
1,181. 1,203. 1,227. 1,240. 1,255. 1,268. 1,284. 1,318. 1,380. 1,523. 1,605. 1,770. 1,804. 1,844.
1,074. 1,096. 1,120. 1,134. 1,148. 1,161. 1,178. 1,211. 1,274. 1,416. 1,499. 1,664. 1,697. 1,738.
41CW-U-KC 1,679. 1,714. 1,748. 1,786. 1,817. 1,839. 1,878. 1,948. 2,003. 2,214. 2,342. 2,592. 2,660. 2,721.
41CW-U-( ) 1,532. 1,566. 1,601. 1,639. 1,670. 1,692. 1,731. 1,801. 1,856. 2,067. 2,195. 2,444. 2,512. 2,574.
41R-( ) 348. 368. 392. 405. 421. 433. 447. 483. 543. 688. 770. 935. 971. 1,009.
Approved KnollTextiles Grades/Fabric
A
Alignment *f
Analogy *
Bocce *
Cat’s Cradle *
Common
Ground *f
Dristi *
Foil Rap *
Heavy Metal *
Mariner *
Metaphor *
Monarch *
Prep *f
Presto *f
Stacks *
B
Abacus *f
Backdrop * *
Bank Shot *
Belize *
Betwixt *f
Bifold CR *
Chroma *f
Classic Boucle *
Close Knit *
B continued
Digit *
Dovetail *f
Fairway *
Fast Forward * *
Field Day *f
Forza *
Grande *
Gusto CR * *
Knoll Felt *
Knoll Hopsack *
Lyric *
Mini Stitch *f
Night Life *
Nonchalant CR *
Odeon *
Paradigm *
Pogo *f
Pop *
Ricochet *f
Spark *f
Spotlight *
Starry Night *f
Techno Tweed *
B continued
Triple Lace *
Utmost *
Vinyl *
Wide Angle *f
Zephyr *
C
Atlas *
Autobahn *
Biota *
Charm *
Circa *
Cricket *
Decade *
Earthwork *
Echo *
Empire Stripe *
English Accent *
Enmesh *f
Entourage *
Fable CR *
Fibra *
Fox Trot CR *
Gala *f
Highline CR *
Hula Hoop *
Kaleidoscope CR *
C continued
Kora CR *
Legend CR *
Lore CR *
Metro *
Moto CR *
Panache CR *
Parasol * *
Posh *
Quark *
Regard CR *
Rio *
Roundtrip *
Sahara *
Sandpiper * *
Sequin CR *
Smart *
Spectator *
Star Struck *
Stepping Stones *
Swing *
Transition *f
Treble CR *
Vibe *
Zari CR *
D
Cavalier *
Compass CR *
Eclat Weave *
Harrison *
Hologram *
In The Loop * *
71
D continued
Masquerade *
Obi *
Plain Linen *
Satellite *
Satin Chisel *
Zoom *f
E
Cross Stitch *
Kimono *
Luberon *
Madison *
Mamba *
Plus *
Whip *
F
Calais Cotton
Velvet *
Century *
Coco * *
Cornaro *
Cuddle Cloth *
Eclipse *
Groove Line *
Icon *
Rivington *
Topography *
Tweed Frieze *
Una *
G
Brugge * *
Garden City *
Gibson *
Hampshire * *
Haze *
Lyon *
Rattan *
Spencer *f
Ultrasuede *f
H
Arno *
Bavaria * *
Lyonese Velvet *
I
Byron *
Canaan *
Cato * *
Cummings *
Galloway *
Gates *
Jaipur *
Knoll Velvet *f
Mepal *
North Island * *
Sandis *
Stirling *
Walker *
Worth * *
Spinneybeck Leather
U
Vicenza *f
Volo *f
V
Acqua *f
Andes *f
España*f
Hand Tipped
Velluto Pelle *f
W
Alaska *f
Amazon *f
Antique *f
Arizona *f
Derbyf
Forte *f
Sabrina *f
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Capri *f
Cervo *
Copenhagenf
Cordovan *f
Distressed *f
Marissaf
Portofino
Prima *f
Riva *f
Saddlef
Salonf
* Approved for fully upholstered
versions.
* * Approved for seat pad with no
welting only.
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Frank Gehry, 1990
Award(s):
ASID Award, 1992; ROSCOE
Award, 1992; ID Magazine Gold
Award, 1992; ICFE Award for
Excellence, 1992; IBD Award
(Silver), 1992; Premium Imperiale
Award (Prince Takamatsu World
Culture Award), 1992; Time
Magazine, Best Design of 1992
Order Code
Example: 91A-GC-K-SA783
91A Hat Trick arm chair
GC Clear Maple
K Seat cushion
SA783 Sabrina, Carmen
Example: 92K-K1320/4
92K High sticking seat cushion
replacement
K1320/4 Cornaro, Tabasco
Note:
The Gehry chairs are part of a collection.
Please refer to Gehry tables on page 186.
Specify:
1. Pattern number
2. Finish selection
3. Textile selection
Seat cushion replacement, specify:
1. Pattern number
2. Textile selection
Frank Gehry
Side and Dining Chairs
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
91A-GC Hat Trick arm chair 18� 25 7 /8� 23 3 /8� 22 1 /4� 33 1 /2� 14 lbs.
18� 25 7 /8� 23 3 /8� 22 1 /4� 33 1 /2� 0.8 15 14 lbs.
91C-GC Hat Trick armless chair 18� 20� 22 1 /4� 33 1 /2� 11 lbs.
18� 20� 22 1 /4� 33 1 /2� 0.8 15 11 lbs.
91K Seat cushion replacement for Hat Trick
arm and armless chair
0.8 15
92C-GC High Sticking high back chair 17 7 /8� 20 1 /8� 23 7 /8� 43 3 /8� 12 lbs.
17 7 /8� 20 1 /8� 23 7 /8� 43 3 /8� 0.7 14 12 lbs.
92K Seat cushion replacement 0.7 14
Ordering Information
Finishes:
Clear Maple (suffix GC)
Seat cushion option:
To specify seat cushion, add ‘‘K’’ to end
of pattern number and then list
textile/leather pattern number.
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
72
Hat Trick note:
Hat Trick arms are 9-ply and arm
supports are a total of 26-ply for added
strength. Arms may be retrofitted on
armless Hat Trick chair, or removed from
arm version. Easily added or removed
with bolts. Contoured seat constructed of
cross-ply maple for rigidity.
High Sticking note:
Built-in lumbar curve for enhanced back
support. To maximize tension
compression, limited assembly glue is
used in woven seat: weaves flex in unison
for spring-like comfort.
Note:
The underside of each piece is embossed
with the Knoll logo and Frank Gehry’s
signature.
Maintenance:
See pages 27-28.
Construction
Frame:
Constructed of hard white maple veneers
in 2� wide, 1 /34� thick strips on Hat Trick
and High Sticking chair, laminated to 7
to 9-ply thickness with high-bonding
urea glue. All wood grains run in same
direction for resilience. Thermo-set
assembly glue provides structural
rigidity without the need for metal
connectors, while allowing for ergonomic
movement and flexibility. Backs on all
chairs flex for added comfort.
Cushions:
1
/2� thick high resiliency foam on Hat
Trick. 3 /4� thick high resiliency foam on
High Sticking. Hat Trick cushion
‘‘shower cap’’ design envelopes entire
seat. Square High Sticking cushion
snap-locks underneath chair.
Glides:
Clear plastic with matte frost finish.

pattern no. unuphol.
grades
A
COM
B C D E F G H I
COL
U V W X Y
91A-GC $3,065.
91A-GC-K 3,354. 3,371. 3,388. 3,407. 3,421. 3,433. 3,451. 3,486. 3,512. 3,605. 3,671. 3,805. 3,832. 3,864.
91C-GC 2,331.
91C-GC-K 2,620. 2,638. 2,654. 2,673. 2,688. 2,698. 2,717. 2,753. 2,778. 2,872. 2,937. 3,070. 3,098. 3,131.
91K-( ) 346. 364. 380. 399. 414. 424. 443. 479. 504. 598. 664. 796. 825. 857.
92C-GC 4,007.
92C-GC-K 4,296. 4,314. 4,330. 4,349. 4,364. 4,374. 4,393. 4,429. 4,454. 4,529. 4,590. 4,714. 4,740. 4,770.
92K-( ) 372. 390. 407. 425. 440. 450. 469. 505. 530. 605. 666. 790. 816. 846.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Common Ground
Dristi
Mariner
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Close Knit
Digit
Dovetail
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
B continued
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Autobahn
Biota
Charm
Circa
Decade
C continued
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Quark
Regard CR
Rio
Roadtrip
Sequin CR
Smart
Star Struck
Stepping Stones
C continued
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
Masquerade
Obi
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
73
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Forte
Sabrina
X
Ducale
Ducale Velours
KnollStudio
Y
Capri
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Frank Gehry, 1990
Award(s):
ASID Award, 1992; ROSCOE
Award, 1992; ID Magazine Gold
Award, 1992; ICFE Award for
Excellence, 1992; IBD Award
(Silver), 1992; Premium Imperiale
Award (Prince Takamatsu World
Culture Award), 1992; Time
Magazine, Best Design of 1992
Order Code
Example: 93A-GC-K-K124/14
93A Cross Check arm chair
GC Clear Maple
K Seat cushion
K124/14 Field Day, Indigo
Example: 93K-K1175/3
93K Cross Check chair seat
cushion replacement
K1175/3 Obi, Geta
Note:
The Gehry chairs are part of a collection.
Please refer to Gehry tables on page 186.
Specify:
1. Pattern number
2. Seat cushion option
3. Textile selection
Seat cushion replacement, specify:
1. Pattern number
2. Textile selection
Frank Gehry
Lounge Seating
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
93A-GC Cross Check arm chair 18 1 /8� 28 3 /4� 28 1 /2� 24 7 /8� 33 5 /8� 12 lbs.
18 1 /8� 28 3 /4� 28 1 /2� 24 7 /8� 33 5 /8� 0.8 15 12 lbs.
93K Seat cushion replacement 0.8 15
94L-GC Power Play club chair 16� 23 1 /2� 31 3 /8� 30 1 /8� 32 7 /8� 26 lbs.
16� 23 1 /2� 31 3 /8� 30 1 /8� 32 7 /8� 0.7 14 26 lbs.
94K Seat cushion replacement 0.7 14
94LY-GC Off Side ottoman 23 3 /8� 23 3 /8� 8 1 /8�-
13 7 23
/8�
3 /8� 23 3 /8� 8 1 /8�-
13 7 /8�
94YK Seat cushion replacement 0.7 14
Ordering Information
Finishes:
Clear Maple (suffix GC)
Seat cushion option:
To specify seat cushion, add ‘‘K’’ to end
of pattern number and then list
textile/leather pattern number.
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
18.
74
Power Play note:
Power Play slats flex individually for
added comfort. Recessed screws connect
seat and arm.
Off Side note:
Ottoman has one pair of legs that, locked
in upright position, create a slanted leg
and foot rest (metal fasteners). Legs fold
underneath for low foot rest or floor
cushion.
Note:
The underside of each piece is embossed
with the Knoll logo and Frank Gehry’s
signature.
Maintenance:
See pages 27-28.
6 lbs.
0.7 14 6 lbs.
Construction
Frame:
Constructed of hard white maple veneers
in 2� wide, 1 /34� thick strips. Laminated to
6 to 9-ply thickness with high-bonding
urea glue. All wood grains run in same
direction for resilience. Thermoset
assembly glue provides structural
rigidity minimizing the need for metal
connectors, while allowing for ergonomic
movement and flexibility. Backs on all
chairs flex for added comfort.
To maximize tension compression, no
assembly glues are used in woven seat:
weaves flex in unison for spring-like
comfort.
Cushions:
1� thick high resiliency foam for
fish-shaped Cross Check cushion. 3 /4�
thick high resiliency foam for square
Power Play and Off Side cushions.
Cushions snap-lock underneath chair.
Glides:
Clear plastic with a matte frost finish.

pattern no. unuphol.
grades
A
COM
B C D E F G H I
COL
U V W X Y
93A-GC $4,956.
93A-GC-K 5,421. 5,464. 5,505. 5,552. 5,588. 5,613. 5,662. 5,745. 5,809. 6,117. 6,283. 6,610. 6,678. 6,757.
93K-( ) 544. 588. 630. 676. 713. 737. 784. 869. 933. 1,240. 1,404. 1,732. 1,803. 1,881.
94L-GC 10,228.
94L-GC-K 10,662. 10,702. 10,736. 10,779. 10,813. 10,836. 10,877. 10,957. 11,014. 11,341. 11,496. 11,810. 11,876. 11,957.
94K-( ) 512. 548. 587. 628. 661. 686. 726. 806. 862. 1,192. 1,347. 1,662. 1,728. 1,806.
94LY-GC 3,065.
94LY-GC-K 3,478. 3,515. 3,551. 3,591. 3,620. 3,643. 3,683. 3,759. 3,815. 4,127. 4,276. 4,575. 4,641. 4,712.
94YK-( ) 489. 524. 561. 599. 630. 654. 694. 770. 826. 1,137. 1,285. 1,586. 1,650. 1,723.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Common Ground
Dristi
Mariner
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Close Knit
Digit
Dovetail
Field Day
Forza
Grande
Gusto CR
Knoll Felt
B continued
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Autobahn
Biota
Charm
Circa
Decade
C continued
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Quark
Regard CR
Rio
Roadtrip
Sequin CR
Smart
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
Masquerade
Obi
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
75
F continued
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Forte
Sabrina
X
Ducale
Ducale Velours
KnollStudio
Y
Capri
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Markus Jehs and Jürgen Laub,
2008
Order Code
Example: JL2-PLT-AP-K1080/8-
VO939
JL2 Jehs+Laub Lounge chair,
articulating back
PLT Pedestal base with contrast
leather trim
AP Polished Aluminum
K1080/8 Rivington, Parchment
VO939 Volo, Talc
Specify:
1. Pattern number
2. Base finish selection
3. Textile selection
4. Contrast leather trim selection,
upcharge applies
Markus Jehs and Jürgen Laub
Jehs+Laub Lounge Collection, pedestal base
description seat h w d h weight type
JL1-P Jehs+Laub Lounge chair, fixed back,
pedestal base
JL1-PLT Jehs+Laub Lounge chair,
fixed back, pedestal base,
contrast leather welt option
JL2-P Jehs+Laub Lounge chair,
articulating back, pedestal base
JL2-PLT Jehs+Laub Lounge chair,
articulating back, pedestal base,
contrast leather welt option
JL3-P Jehs+Laub Ottoman,
pedestal base
JL3-PLT Jehs+Laub Ottoman,
pedestal base, contrast leather welt option
Ordering Information
Base finishes:
Polished Aluminum (suffix AP)
Textured Black paint (suffix TB)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
textile
fabric
yds.
15� 33 1 /4� 30 1 /2� 38 1 /2� 48 lbs. 3.1 50
15� 33 1 /4� 30 1 /2� 38 1 /2� 48 lbs. uphol. 3.1 50
welt 4
15� 33 1 /4� 30 1 /2� 38 1 /2� 47 lbs. 3.1 50
15� 33 1 /4� 30 1 /2� 38 1 /2� 47 lbs. uphol. 3.1 50
welt 4
76
31� 22 1 /2� 17 1 /4� 27 lbs. 1.2 20
31� 22 1 /2� 17 1 /4� 27 lbs. uphol. 1.2 20
welt 3
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Markus Jehs and Jurgen Laub are
located on the underside of the chair and
ottoman.
The Jehs+Laub Lounge Collection with
pedestal base is Greenguard certified.
Construction
Shell:
Molded and reinforced urethane.
req.
leather
sq. ft.
Base:
Pedestal base is available with polished
aluminum finish and wire base is
available with polished chrome finish,
both bases are also available with
textured black paint finish.
Upholstery:
Polyurethane foam with polyester-fiber
backing. Hidden seam tufting eliminates
the need for traditional pulls or
buttons. A perimeter welt is standard on
both chair and ottoman and is available
as a self welt (same material) or as a
contrasting leather welt. Please specify
pattern number with LT suffix, for
contrasting welt, and add appropriate
leather upcharge for total list price of the
piece. Leather welt option is available
on textile and leather upholstery.
Glides:
Nylon glides, natural.
Control:
360° swivel mechanism.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
JL1-P-( )-( ) $3,885. $3,950. $4,012. $4,080. $4,136. $4,176. $4,245. $4,375. $4,471. $5,485. $5,694. $6,119. $6,207. $6,310.
JL1-PLT-( )-( )-( ) 3,885. 3,950. 4,012. 4,080. 4,136. 4,176. 4,245. 4,375. 4,471. 5,485. 5,694. 6,119. 6,207. 6,310.
upchg, welt 665. 770. 982. 1,027. 1,078.
JL2-P-( )-( ) 4,730. 4,795. 4,857. 4,925. 4,981. 5,021. 5,090. 5,220. 5,316. 6,545. 6,754. 7,179. 7,267. 7,370.
JL2-PLT-( )-( )-( ) 4,730. 4,795. 4,857. 4,925. 4,981. 5,021. 5,090. 5,220. 5,316. 6,545. 6,754. 7,179. 7,267. 7,370.
upchg, welt 665. 770. 982. 1,027. 1,078.
JL3-P-( )-( ) 2,266. 2,291. 2,315. 2,341. 2,363. 2,379. 2,405. 2,455. 2,493. 2,690. 2,773. 2,943. 2,979. 3,020.
JL3-PLT-( )-( )-( ) 2,266. 2,291. 2,315. 2,341. 2,363. 2,379. 2,405. 2,455. 2,493. 2,690. 2,773. 2,943. 2,979. 3,020.
upchg, welt 540. 645. 857. 902. 953.
Approved KnollTextiles Grade/Fabric
A
Analogy
Common Ground
Dristi
Mariner
Presto
B
Bank Shot
Chroma
Classic Boucle
Field Day
Forza
Gusto CR
Knoll Felt
Knoll Hopsack
Nonchalant CR
Pop
B cont.
Ricochet
Spark
Starry Night
Utmost
Vinyl
C
Atlas
Biota
Circa
English Accent
Enmesh
Regard
Sahara
Sequin CR
Star Struck
Swing
Transition
Vibe
77
D
Cavalier
Harrison
Plain Linen
Satellite
F
Calais Cotton
Velvet
Coco
Cornaro
Rivington
Tweed Frieze
Una
G
Haze
Ultrasuede
H
Arno
I
Gates
Knoll Velvet
Stirling
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Espana
Maremma
Velluto Pelle
W
Alaska
Antique
Arizona
Forte
Sabrina
KnollStudio
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
Saddle
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Markus Jehs and Jürgen Laub,
2008
Order Code
Example: JL1-W-TB-CO2206
JL1 Jehs+Laub Lounge chair,
fixed back
W Wire base
TB Textured Black
CO2206 Copenhagen, Amaliehaven
Specify:
1. Pattern number
2. Base finish selection
3. Textile selection
4. Contrast leather trim selection,
upcharge applies
Markus Jehs and Jürgen Laub
Jehs+Laub Lounge Collection, wire base
description seat h w d h weight type
JL1-W Jehs+Laub Lounge chair, fixed back,
wire base
JL1-WLT Jehs+Laub Lounge chair,
fixed back, wire base,
contrast leather welt option
JL2-W Jehs+Laub Lounge chair,
articulating back, wire base
JL2-WLT Jehs+Laub Lounge chair,
articulating back, wire base,
contrast leather welt option
JL3-W Jehs+Laub Ottoman,
wire base
JL3-WLT Jehs+Laub Ottoman,
wire base, contrast leather welt option
Ordering Information
Base finishes:
Polished Chrome (suffix C)
Textured Black paint (suffix TB)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
textile
fabric
yds.
14 1 /2� 33 1 /4� 30 1 /2� 38� 43 lbs. 3.1 50
14 1 /2� 33 1 /4� 30 1 /2� 38� 43 lbs. uphol. 3.1 50
welt 4
14 1 /2� 33 1 /4� 30 1 /2� 38� 42 lbs. 3.1 50
14 1 /2� 33 1 /4� 30 1 /2� 38� 42 lbs. uphol. 3.1 50
welt 4
78
31� 22 1 /2� 16 3 /4� 22 lbs. 1.2 20
31� 22 1 /2� 16 3 /4� 22 lbs. uphol. 1.2 20
welt 3
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Markus Jehs and Jurgen Laub are
located on the underside of the chair and
ottoman.
The Jehs+Laub Lounge Collection with
wire base is Greenguard certified.
Construction
Shell:
Molded and reinforced urethane.
req.
leather
sq. ft.
Base:
Pedestal base is available with polished
aluminum finish and wire base is
available with polished chrome finish,
both bases are also available with
textured black paint finish.
Upholstery:
Polyurethane foam with polyester-fiber
backing. Hidden seam tufting eliminates
the need for traditional pulls or
buttons. A perimeter welt is standard on
both chair and ottoman and is available
as a self welt (same material) or as a
contrasting leather welt. Please specify
pattern number with LT suffix, for
contrasting welt, and add appropriate
leather upcharge for total list price of the
piece. Leather welt option is available
on textile and leather upholstery.
Glides:
Nylon glides, natural.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
JL1-W-( )-( ) $3,885. $3,950. $4,012. $4,080. $4,136. $4,176. $4,245. $4,375. $4,471. $5,485. $5,694. $6,119. $6,207. $6,310.
JL1-WLT-( )-( )-( ) 3,885. 3,950. 4,012. 4,080. 4,136. 4,176. 4,245. 4,375. 4,471. 5,485. 5,694. 6,119. 6,207. 6,310.
upchg, welt 665. 770. 982. 1,027. 1,078.
JL2-W-( )-( ) 4,730. 4,795. 4,857. 4,925. 4,981. 5,021. 5,090. 5,220. 5,316. 6,545. 6,754. 7,179. 7,267. 7,370.
JL2-WLT-( )-( )-( ) 4,730. 4,795. 4,857. 4,925. 4,981. 5,021. 5,090. 5,220. 5,316. 6,545. 6,754. 7,179. 7,267. 7,370.
upchg, welt 665. 770. 982. 1,027. 1,078.
JL3-W-( )-( ) 2,266. 2,291. 2,315. 2,341. 2,363. 2,379. 2,405. 2,455. 2,493. 2,690. 2,773. 2,943. 2,979. 3,020.
JL3-WLT-( )-( )-( ) 2,266. 2,291. 2,315. 2,341. 2,363. 2,379. 2,405. 2,455. 2,493. 2,690. 2,773. 2,943. 2,979. 3,020.
upchg, welt 540. 645. 857. 902. 953.
Approved KnollTextiles Grade/Fabric
A
Analogy
Common Ground
Dristi
Mariner
Presto
B
Bank Shot
Chroma
Classic Boucle
Field Day
Forza
Gusto CR
Knoll Felt
Knoll Hopsack
Nonchalant CR
Pop
B cont.
Ricochet
Spark
Starry Night
Utmost
Vinyl
C
Atlas
Biota
Circa
English Accent
Enmesh
Regard
Sahara
Sequin CR
Star Struck
Swing
Transition
Vibe
79
D
Cavalier
Harrison
Plain Linen
Satellite
F
Calais Cotton
Velvet
Coco
Cornaro
Rivington
Tweed Frieze
Una
G
Haze
Ultrasuede
H
Arno
I
Gates
Knoll Velvet
Stirling
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
Espana
Maremma
Velluto Pelle
W
Alaska
Antique
Arizona
Forte
Sabrina
KnollStudio
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
Saddle
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Florence Knoll, 1954
Order Code
Example: 1205-CO-S3-K349/4
1205 Florence Knoll lounge
CO Satin Chrome
S3 Sofa
K349/4 Alignment, Paprika
Note:
Florence Knoll lounge seating is part of a
collection. Please refer to Florence Knoll
executive collection, conference and low
tables beginning on page 190.
Specify:
1. Pattern number
2. Base finish selection (chair, settee
and sofa only)
3. Textile selection
Florence Knoll
Lounge Seating
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
1205S1 Lounge chair 18 1 /4� 23 1 /2� 32 1 /4� 32 1 /4� 31 1 /4� 6.75 97 70 lbs.
18 1 /4� 23 1 /2� 32 1 /2� 32 1 /4� 31 1 /4� 6.75 97 70 lbs.
1205S2 Settee 18 1 /4� 23 1 /2� 62 1 /2� 32 1 /4� 31 1 /4� 11.8 145 101 lbs.
18 1 /4� 23 1 /2� 62 1 /2� 32 1 /4� 31 1 /4� 11.8 145 101 lbs.
1205S3 Sofa 18 1 /4� 23 1 /2� 90 1 /2� 32 1 /4� 31 1 /4� 15.7 193 166 lbs.
18 1 /4� 23 1 /2� 90 1 /2� 32 1 /4� 31 1 /4� 15.7 193 166 lbs.
2530Y2C Two Seater Bench 36 1 /4� 19 1 /2� 16 3 /4� 1.6 20 29 lbs.
2530Y3C Three Seater Bench 60 1 /4� 19 1 /2� 16 3 /4� 2.5 32 47 lbs.
Ordering Information
Base finish options:
Polished Chrome (suffix C)
Satin Chrome (suffix CO) Not available
on bench
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
80
Note:
Designer signature and KnollStudio logo
are stamped into the base of the frame.
Cal 133 Fire Codef:
The Florence Knoll Lounge collection
complies with California Technical
Bulletin 133 in selected upholstery.
Specify suffix -C at end of pattern
number and suffix -133 at end of textile
selection. Upcharge applies, see page
18.
Maintenance:
See pages 27-28.
Note:
The Florence Knoll Lounge Collection is
Greenguard certified.
Construction
Chair, Settee and Sofa:
Inner frame solid wood. Exposed metal
frame and legs heavy gauge tubular steel
in polished or satin chrome finish.
Bench:
Upholstered seat attached to exposed
metal frame. Heavy gauge steel in a
polished chrome finish. Seat cushion is
permanently attached to frame. Large
bench consists of 2 separate 30�
cushions. Frame only available in
polished chrome.
Upholstery:
Seat suspension with No-Sag springs.
Arm, seat and back cushions variable
density foam. Seat and back covering is
fully welted and tufted. Pieces
upholstered in leather have matching
buttons, pieces upholstered in fabric do
not have buttons.
Glides:
Bench and lounge collection have
chrome-plated adjustable glides used for
levelling.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
1205-C-S1 $6,014. $6,155. $6,288. $6,435. $6,554. $6,639. $6,787. $7,067. $7,274. $8,793. $9,336. $10,442. $10,672. $10,939.
1205-CO-S1 6,131. 6,272. 6,405. 6,552. 6,671. 6,756. 6,904. 7,184. 7,391. 8,910. 9,453. 10,559. 10,789. 11,056.
1205-C-S2 9,612. 9,829. 10,040. 10,268. 10,456. 10,591. 10,821. 11,259. 11,583. 13,687. 14,503. 16,156. 16,498. 16,900.
1205-CO-S2 9,789. 10,006. 10,217. 10,445. 10,633. 10,768. 10,998. 11,435. 11,759. 13,864. 14,679. 16,332. 16,675. 17,076.
1205-C-S3 13,297. 13,575. 13,840. 14,129. 14,368. 14,540. 14,832. 15,384. 15,797. 18,841. 19,924. 22,128. 22,583. 23,117.
1205-CO-S3 13,535. 13,813. 14,078. 14,368. 14,606. 14,778. 15,070. 15,623. 16,036. 19,080. 20,162. 22,366. 22,822. 23,356.
2530Y2C 2,952. 2,991. 3,026. 3,067. 3,101. 3,125. 3,167. 3,244. 3,302. 3,481. 3,619. 3,900. 3,961. 4,027.
2530Y3C 4,877. 4,948. 5,014. 5,088. 5,146. 5,189. 5,263. 5,403. 5,504. 5,709. 5,931. 6,383. 6,476. 6,588.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Common Ground
Cotton Duck
Dristi
Mariner
Metaphor
Monarchf
Prestof **
B
Abacusf
Bank Shot
Bifold CR
Chroma
Classic Boucle
Digit
Fairway * *
Field Dayf
B continued
Grande
Gusto CR * *
Knoll Feltf
Knoll Hopsackf
Lyric
Night Life
Nonchalant CR
Pop**
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Techno Tweed
Utmost
Zephyr
C
Atlas
Autobahn
Biotaf
Circa
Cricket
Entourage
Gala * *
Hula Hoop
Lore CR
Sahara
Sequin CR
C continued
Stepping Stones
Swing * *
Transitionf
D
Cavalierf
Eclat Weave
Harrison
Hologram
Masquerade
Plain Linen * *
Satellite
Satin Chisel
Zoom
81
E
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Coco * *
Cornaro * *
Eclipse
Groove Line
Rivington
Topography
Una *
G
Haze
Rattan
Spencer
Ultrasuede
H
Arno
Lyonese Velvet
I
Cato
Gates
Knoll Velvet
Stirling
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Fortef
Sabrinaf
KnollStudio
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
f Available for Cal 133 upholstery.
* Will be produced with matching
buttons rather than tufted
* *Fabric will be railroaded
Check with your KnollTextiles or
Spinnybeck Representative for changes or
additions.

Designer(s):
Antti Kotilainen, 2002
Award(s):
Good Design Award, 2002
Order Code
Example: 23CK-N-WV-C-D893
23CK-N Chip armless non-stacking
chair
WV White shell
C Chrome base
D893 Divina 893 fabric
Example: 23CH-BU-C
23CH Chip barstool
BU Blue shell
C Chrome base
Specify:
1. Pattern number
2. Shell finish
3. Frame finish
4. Textile selection
Antti Kotilainen
CHIP Chair and Barstool
description seat h arm h, max w d h weight
23C CHIP armless chair 17 3 /4� 20� 19 3 /4� 31� 7 lbs.
17 3 /4� 20� 19 3 /4� 31� 7 lbs.
23CK CHIP armless chair, seat pad 17 3 /4� 20� 19 3 /4� 31� 8 lbs.
17 3 /4� 20� 19 3 /4� 31� 8 lbs.
23A CHIP arm chair 17 3 /4� 26 1 /4� 21 1 /2� 19 3 /4� 31� 10 lbs.
17 3 /4� 26 1 /4� 21 1 /2� 19 3 /4� 31� 10 lbs.
23AK CHIP arm chair, seat pad 17 3 /4� 26 1 /4� 21 1 /2� 19 3 /4� 31� 10 lbs.
17 3 /4� 26 2 /4� 21 1 /2� 19 3 /4� 31� 10 lbs.
23CH-C CHIP Barstool, bar height, chrome
base
29 1 /2� 19 1 /2� 17 1 /2� 33 3 /4� 10 lbs.
23DOLLY Dolly for 20 chairs 23 5 /8� 32 1 /4� 34 5 /8� 24 lbs.
23GA Ganging mechanism
Ordering Information
Frame Finishes:
Silver grey paint (suffix S)
Chrome (suffix C)
Shell Finishes:
Birch (suffix FMB)
Blue (suffix BU)
Black (suffix BL)
Oak (suffix FMO)
Orange (suffix OR)
Red (suffix RD)
Grey (suffix SL)
Yellow (suffix YL)
White (suffix WV)
82
KnollStudio 20-Day Program:
The Chip armless chair with a chrome
base and white, birch or grey shells are
available on the 20-day program. For
more specific information, please consult
pages 29-32.
Maintenance:
See pages 27-28.
Cal 133 Fire Codef:
The Chip chair and Barstool
unupholstered passes Cal 133.
Note:
The CHIP chair and stool are
Greenguard certified.
Construction
Chair:
Constructed of melamine covered
molded birch on a chrome plated or
powder coated base.
Note: The backrest mounts will always be
in the silver grey powder paint, even on a
chair with chrome frame.
Seat pad:
CHIP chair with seat pad does not stack.
Seat pad is a dacron covered piece of
plywood attached to the chair seat. Seat
pad is permanently attached to seat by
discrete screws not visible from top of
chair. Upholstery available in Kvadrat
Divina and Gabriel Nova fabrics. Please
contact your KnollStudio sales
representative for samples.

pattern no. unuphol. seat pad
23C-( )-C $680.
23C-( )-S 634.
23CK-N-( )-C-( ) 1,095.
23CK-N-( )-S-( ) 1,052.
23A-( )-C 975.
23A-( )-S 883.
23AK-N-( )-S-( ) 1,338.
23AK-N-( )-C-( ) 1,433.
23CH-( )-C 718.
23DOLLY 1,424.
23GA 60.
Barstool:
Constructed of melamine covered
molded birch on a chrome plated base.
Foot rest is 11 1 /2� from the floor.
* Painted base (S) is available through
Custom Product Development.
Stackability:
Chair
CHIP stacks 12 on the floor.
Height of 12 CHIP chairs measures 46�
high.
Barstool
CHIP Barstool stacks 6 high on the floor.
Transportation Dolly:
Zinc coated dolly allows CHIP arm and
armless chairs to stack 20 high. Height
of dolly with 20 CHIP chairs, fully
loaded is 63�. Empty dollies can be
stacked 5 high.
Ganging Mechanism:
The easy to attach and detach
mechanism links the back of the chair
frames. The mechanism is composed of
translucent polypropylene. Can be used
for both arm and armless chairs.
83
KnollStudio
Approved Textiles
Divina (D):
Plain weave, 100% wool fabric. Piece
dyed. Color differences may occur.
Novo (N):
Elastic fabric in wool with a
non-directional woven design. Only
environmentally correct products are
used in dying and after-treatment, and
the colors are completely free of heavy
metals.
Please contact your KnollStudio
representative for colorways, color codes
and samples.

Designer(s):
Maya Lin, 1998
Award(s):
Best of Neocon Silver Award,
1998; Good Design Award,
Chicago Athenaeum, 1998; Good
Design Award, 2006
Order Code
Example: 84YM-W-KHRC-K642/5
84YM Stones child seat
W With weight
KHRC Khaki
K642/5 Mariner, Steel
Specify:
1. Pattern number
2. Weight option
3. Finish option
4. Textile selection
Ordering Information:
Molded Polyethylene finish:
White (suffix WV)
Molded Polyethylene finishes with 100%
recycled content:
Blue (suffix BLRC)
Chartreuse (CHRC)
Khaki (suffix KHRC)
Platinum (suffix PLRC)
Poppy (suffix PORC)
Silver (suffix SPRC)
Tarmac (suffix TARC)
Warm Red (suffix WRRC)
Maya Lin
Stones
Seats and Coffee Table
description w d h material
83Y Stones adult seat 27� 19� 15� molded
polyethylene
no weight
27� 19� 15� molded
polyethylene
with weight
textile
fabric yds.
83Y-K Seat cushion for adult seat 1.3 30
84Y Stones child seat 16� 12� 10� molded
polyethylene
no weight
16� 12� 10� molded
polyethylene
with weight
84Y-K Seat cushion for child seat 1.0 25
85T42 Stones coffee table 42� 29 1 /2� 11� molded
polyethylene
no weight
83ANCHOR Stone Security Kit
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
18.
Seats and Table:
Stones are available in molded
polyethylene in virgin or recyled
material. Both versions are fully finished
and are enclosed on top, bottom and
sides. Seat tops are slightly concave and
table top is slightly convex.
Outdoor application note:
With proper care and limited exposure to
the elements, Stones tables and seats
without seat pads are suitable for outdoor
use. Polyethylene stones in all colors can
be used outdoors. Remove water in the
concave seats to avoid permanent stains.
White patina may appear on surface.
During cool or inclement weather, it is
recommended to bring Stones inside.
Child seat application note:
Child seat is for child use only and not
sized to be used by adults. Do not use as
stepping stool.
84
Security Kit:
Security kit hooks onto latch on
underside of polyethylene Stone directly
into the ground for permanent
applications. Due to variations in
flooring, kit does not include hardware.
UV Testing:
Maya Lin Stones in polyethylene in all
colors have passed UV testing standards
including 100 hours under intense UV
radiation to test for colorfastness.
Cal 133:
For polyethylene Maya Lin Stones in a
Cal 133 finish please request through
CPD. Please note, specifying the Maya
Lin Stone seat pad in a Cal 133 textile
does not make the polyethylene Stone
Cal 133 approved.
Maintenance:
See pages 27-28.
Note:
The Maya Lin Seat and Coffee Table is
Greenguard approved.
The Child’s Maya Lin Stone is compliant
to the Consumer Product Safety
Improvement Act of 2008 for Children’s
Products, 16 C.F.R. 1303, CPSIA Title 1
Section 101 for Total Lead in Substrates
and Surface Coatings.
req. leather
sq. ft. weight
13 lbs.
32 lbs.
6 lbs.
17 lbs.
38 lbs.
Construction
Molded Polyethylene Stones:
Polyethylene stones have integral color
with a light texture and a low gloss finish,
available in one color.
Recycled Molded Polyethylene Stones:
Recylced polyethylene stones are
composed of 100% recycled
polyethylene in eight colors. Black specs
will appear randomly on the surface of
the stone. Color will vary slightly from
stone to stone. Warranty claims for color
variations will not be honored.
Weighted Polyethylene Stones:
Adult and child stones in molded
poyethylene can be specified with or
without weight. For stones with weight,
sand is added at the factory. Weight can
be adjusted in the field through access
on underside of the stones. There is no
option for a sand kit if the Stones are
ordered without weight. The coffee table
can only be specified without weight.
Seat cushions (seats only):
Seat cushions are 2 1 /4� thick, solid foam
piece with tapered edge and fabric or
leather zip-lock cover. Seat cushions are
fully upholstered on top and bottom.
Seat cushions are not attached to Stone.

pattern no. unuphol.
83YM-( ) $513.
83YMW-( ) 607.
grades
A
COM
B C D E F G H I
COL
U V W X Y
83Y-K-( ) 533. 561. 588. 617. 642. 660. 689. 746. 787. 1,092. 1,233. 1,520. 1,579. 1,650.
84YM-( ) 353.
84YMW-( ) 408.
84Y-K-( ) 389. 418. 442. 469. 492. 506. 533. 588. 625. 968. 1,098. 1,362. 1,418. 1,481.
85T42M-( ) 923.
83ANCHOR 121.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Marinerf
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixt
Chromaf
Classic Boucle
Close Knitf
Digit
Dovetailf
Fairway
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Mini Stitchf
B continued
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Biotaf
Charm
Circa
Cricket
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
Fibra
Fox Trot CR
C continued
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transitionf
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
85
F continued
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Piero Lissoni, 2001
Order Code
Example: 69R-K1052/7
69R Divina sofa, dual density
K1052/7 Topography, Canyon
Example: 68C-K1052/7
68C Divina side cushion
K1052/7 Topography, Canyon
Specify:
1. Pattern number
2. R for dual density cushions
3. Textile selection
Side cushion, specify:
1. Pattern number
2. Textile selection
Piero Lissoni
Divina� Lounge Seating
description seat h arm h w d h
foam
type
textile
fabric
yds.
req.
leather
sq. ft. weight
67S Petite lounge chair 16 3 /4� 24 1 /2� 30 1 /2� 31 1 /4� 32 1 /2� standard 4.5 72 42 lbs.
67 Standard lounge chair 16 1 /4� 24 1 /4� 37� 35 1 /2� 31 1 /4� standard 7.5 108 59 lbs.
16 1 /4� 24 1 /2� 37� 35 1 /2� 31 1 /4� dual
density
7.5 108 59 lbs.
68 Settee 16 1 /4� 25 1 /4� 66� 35 1 /2� 31 1 /4� standard 11.3 163 83 lbs.
16 1 /4� 25 1 /4� 66� 35 1 /2� 31 1 /4� dual
density
11.3 163 83 lbs.
69 Sofa 16 1 /4� 24 1 /4� 91� 35 1 /2� 31 1 /4� standard 13.3 192 130 lbs.
68C Optional side cushion for standard
chair, settee and sofa
16 1 /4� 24 1 /4� 91� 35 1 /2� 31 1 /4� dual
density
13.3 192 130 lbs.
26� 4� 9 1 /2� standard 1 n/a 5 lbs.
73 Ottoman 29 1 /2� 29 1 /2� 16� standard 4.1 43 27 lbs.
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Optional Side Cushion:
One or two cushions can be specified for
the standard lounge chair, settee and
sofa. Side cushion is composed of
polyurethane with polyester wrap. Since
cushion is not fitted, it is available in
fabric only.
86
29 1 /2� 29 1 /2� 16� dual
density
Cal 133 Fire Codef:
The Divina Lounge collection complies
with California Technical Bulletin 133 in
selected fabrics and all leather
upholstery. Specify suffix -C at end of
pattern number and suffix -133 at end of
textile or leather selection. For Cal 133
approval, leather units must be double
upholstered: in the F187 fabric barrier
and then in leather. Upcharge applies,
see page 18.
Maintenance:
See pages 27-28.
Note:
The Divina Lounge Collection is
Greenguard certified.
4.1 43 27 lbs.
Construction
Frame:
Inner frame solid wood. Exposed metal
frame and legs in heavy gauge tubular
steel in polished chrome finish.
Feet:
Chrome-plated feet with polyurethane
glides measuring 5.75� high.
Standard Cushions:
Seat cushion in polyurethane with
polyester fiber wrap. Back cushion in
polyurethane. Cushions are not
reversible.
Dual Density Cushions:
Back cushion is polyurethane. Seat
cushion is dual density foam: a soft foam
core with a memory topper. Cushions are
not reversible.
Upholstery:
Double-needled stitching on leather
upholstery. Double-needled stitching on
thin solid textiles, single-needled
stitching on heavily ribbed fabrics and
multicolor prints.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
67S-( ) $4,149. $4,301. $4,448. $4,609. $4,740. $4,835. $4,997. $5,302. $5,530. $6,699. $7,249. $8,365. $8,598. $8,868.
67-( ) 4,781. 4,985. 5,181. 5,396. 5,573. 5,699. 5,916. 6,326. 6,629. 8,101. 8,841. 10,341. 10,655. 11,018.
67R-( ) 5,020. 5,234. 5,440. 5,666. 5,852. 5,984. 6,212. 6,642. 6,960. 8,506. 9,283. 10,858. 11,188. 11,569.
68-( ) 7,247. 7,561. 7,862. 8,193. 8,462. 8,658. 8,991. 9,621. 10,086. 12,365. 13,499. 15,810. 16,291. 16,850.
68R-( ) 7,609. 7,939. 8,255. 8,603. 8,885. 9,091. 9,441. 10,102. 10,590. 12,983. 14,174. 16,601. 17,106. 17,693.
69-( ) 8,197. 8,607. 8,995. 9,423. 9,772. 10,025. 10,452. 11,265. 11,869. 15,700. 17,165. 20,143. 20,766. 21,487.
69R-( ) 8,607. 9,037. 9,445. 9,894. 10,261. 10,526. 10,975. 11,828. 12,462. 16,485. 18,023. 21,150. 21,804. 22,561.
68C-( ) 497. 525. 553. 583. 607. 626. 656. 715. 756.
73-( ) 2,475. 2,582. 2,683. 2,793. 2,884. 2,951. 3,063. 3,274. 3,311. 3,432. 3,532. 3,984. 4,077. 4,187.
73R-( ) 2,599. 2,711. 2,817. 2,933. 3,028. 3,099. 3,216. 3,438. 3,477. 3,604. 3,709. 4,183. 4,281. 4,396.
Approved KnollTextiles Grade/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shotf
Belize
Betwixt
Bifold CR
Chroma
Classic Bouclef
Digit
Fairway
Field Dayf
Gusto CR
B continued
Knoll Felt
Knoll Hopsack
Lyric
Nonchalant CR
Paradigm
Pogo
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Biotaf
Charm
Circa
Cricket
Earthworkf
Echo
Empire Stripe
English Accent
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
C continued
Quark
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Star Struck
Stepping Stones
Swing
Transitionf
Zari CR
D
Cavalier
Eclat Weave
Harrison
Hologram
Masquerade
Plain Linen
Satellite
Satin Chisel
Zoom
87
E
Cross Stitchf
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
G
Brugge
Garden City
Hampshire
Haze
Lyon
Spencer
Ultrasuede
H
Arnof
Lyonese Velvet
I
Byron
Cato
Galloway
Gates
Knoll Velvet
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Ross Lovegrove, 2004
Order Code
Example: 27CTR-KC-BL-C-K(VP-
BLK)
27C Armless chair
TR Tablet Arm ($394 list
upcharge)
KC Rotary Maple face
BL Black painted back
C Chrome legs
K Seat cushion
VP-BLK Velluto Pelle, Black
Specify:
1. Pattern number
2. Optional tablet arm ($394 list
upcharge)
3. Finish selection, face
4. Finish selection, back
5. Leg finish (chrome only)
6. Seat cushion option
7. Textile selection
Ordering Information:
Maple finish:
Rotary Maple (suffix KC)
Exotic Alpi and Veneer finishes:
Beech (suffix BN)
Cherry (suffix CY)
Walnut (suffix WA)
Zebra (suffix ZE)
Macasser Ebony (suffix ME)
Black and White Woodgrain
(suffix WB)
Ross Lovegrove
Sprite Armless Chair
description face/back seat h w d h
textile
fabric
yds.
leather
sq
ft. weight
27C Same finish, face and back maple/maple 17� 22� 22� 32� 0.5 10 10 lbs.
27C Combination face and back maple/paint or
paint/maple
paint A/paint B or
paint B/Paint A
veneer/paint or
paint/veneer
paint A/paint A 17� 22� 22� 32� 0.5 10 10 lbs.
veneer/veneer 17� 22� 22� 32� 0.5 10 10 lbs.
17� 22� 22� 32� 0.5 10 10 lbs.
17� 22� 22� 32� 0.5 10 10 lbs.
17� 22� 22� 32� 0.5 10 10 lbs.
Sprite Dolly 14.5� 31� 26.5� 10 lbs.
27CGA Sprite Ganging Mechanism,
Armless
TR Sprite Tablet Arm 9 3 /4� 13�
Paint finishes:
Black (suffix BL)
Grey (suffix SL)
Lime (suffix LI)
Navy (suffix NA)
Red (suffix RD)
White (suffix WV)
Leg finish:
Chrome (suffix C)
KnollStudio 20-Day Program:
The Sprite armless chair with a chrome
base and white, black or rotary maple
shells are available on the 20-day
program. For more specific information,
please consult pages 29-32.
Maintenance:
See pages 27-28.
Cal 133 Fire Code f:
The Sprite chair complies with Cal 133
fire code unupholstered and with
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Note:
The Sprite Chair in Maple, Exotic Alpi
and Veneer finishes are Greenguard
certified.
88
Construction
Shell:
Molded plywood shell made of six layers
of maple and three layers of adhesive.
Alpi Veneers:
Reconstituted veneers made of both
plantation poplar and Obece/Ayous, a
bland African wood from well-managed
sources with a long term forestry
management plan.
Paint:
Smooth highly durable paint.
Edge finish:
On chairs painted one color, edge will be
painted. For chairs in two-tone
combination or with veneer option, edges
are natural maple. For chairs in exotic
Alpi veneer finish, edges are natural
maple. For high use applications, maple
or veneer options are recommended.
Base:
5 /8� tubular steel with mirror chrome
finish. Shell connected to the seat with
four screws. Four rubber bumpers assure
proper stacking.
Upholstery:
Seat pad, upholstered in fabric or leather
with urethane foam. Water based glue
used for upholstery. Seat pad is attached
to chair by four screws.
Stacking:
Armless Sprite chairs without seatpad
can stack 8-10 high, with seatpad, 4-6.
Transportation Dolly:
Chrome plated steel frame with rubber
wheels, 10-12 Sprite armless chairs can
stack on a dolly. Dolly with 10 armless
chairs measures: 53� hx40� wx22� d
Ganging Mechanism:
Armless mechanism measures 7.4�.
Device is constructed of a low durometer
thermoplastic elastomer with a
neodymium magnet. When not in use,
the mechanism is easily stored
(magnetized) to the underside of the
chair.
Tablet Arm:
Tablet is right-handed with a fixed,
chrome-plated arm. Integral to the frame,
the tablet is black laminate with a 1 /2�
beveled birch edge. Tablet is factory
installed and cannot be retrofitted in the
field. For left handed version, please
contact CPD. Sprite tablet arm passes
BIFMA standards. Sprite chairs with
tablet arm stack 4 high.

pattern no.
unuphol.
(remove
suffix -k)
grades
A
COM
B C D E F G H I
COL
U V W X Y
27C-(KC)-(KC)
-C-K
$508. $635. $649. $661. $675. $687. $696. $710. $737. $756. $841. $893. $1,002. $1,025. $1,051.
27C-( )-( )
-C-K
610. 738. 751. 764. 777. 789. 798. 812. 839. 858. 944. 996. 1,105. 1,128. 1,154.
27C-( )-( )-C-K 852. 979. 993. 1,005. 1,019. 1,030. 1,040. 1,053. 1,081. 1,099. 1,185. 1,237. 1,346. 1,369. 1,395.
27C-( )-( )-C-K 635. 763. 776. 789. 803. 814. 823. 837. 864. 883. 969. 1,021. 1,130. 1,153. 1,179.
27C-( )-( )-C-K 682. 810. 823. 836. 850. 861. 870. 884. 911. 930. 1,016. 1,068. 1,177. 1,200. 1,226.
27C-( )-( )-C-K 891. 1,019. 1,032. 1,045. 1,059. 1,070. 1,079. 1,093. 1,120. 1,139. 1,225. 1,277. 1,386. 1,409. 1,435.
27DOLLY 560.
27CGA 21.
TR 394.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Chroma
Classic Boucle
Close Knit
Digit
Digital Tape
Dovetailf
Fairway
Fast Forward
B continued
Field Dayf
Forza
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
Mini Stitchf
Night Life
Paradigm
Pogo
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
C continued
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Legend CR
Lore CR
Metro
Moto CR
Posh
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Smart
Spectator
Star Struck
Stepping Stones
C continued
Transitionf
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
89
F
Calais Cotton
Velvet
Century
Coco
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acqua
Andes
España
Hand Tipped
Maremma
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Lucente
Sabrina
X
Ducale
Ducale Velours
KnollStudio
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Saddle
Salon
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Ross Lovegrove, 2004
Order Code
Example: 27C-KC-BL-C-KC-K(VP-
BLK)
27C Armless chair
KC Rotary Maple face
BL Black painted back
C Chrome legs
KC Rotary Maple arms
K Seat cushion
VP-BLK Velluto Pelle, Black
Specify:
1. Pattern number
2. Finish selection, face
3. Finish selection, back
4. Leg finish (chrome only)
5. Arm finish
6. Seat cushion option
7. Textile selection
Ordering Information:
Maple finish:
Rotary Maple (suffix KC)
Exotic Alpi and Veneer finishes:
Beech (suffix BN)
Cherry (suffix CY)
Walnut (suffix WA)
Zebra (suffix ZE)
Macasser Ebony (suffix ME)
Black and White Woodgrain
(suffix WB)
Ross Lovegrove
Sprite Arm Chair
description face/back/arm arm h seat h w d h
27A Same finish, face and back maple/maple/
maple arms
maple/maple/
urethane arms
paint A/paint A/
urethane arms
veneer/veneer/
urethane arms
veneer/veneer
veneer arms
27A Combination, face and back maple/paint or
paint/maple
maple arms
maple/paint or
paint/maple
urethane arms
paint A/paint B or
paint B/paint A
urethane arms
veneer/paint or
paint/veneer
veneer arms
veneer/paint or
paint/veneer
urethane arms
textile
fabric
yds.
leather
sq
ft. weight
25.25� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
25.25� 17� 29� 22� 32� 0.5 10 13 lbs.
25.25� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
25.25� 17� 29� 22� 32� 0.5 10 13 lbs.
25.5� 17� 29� 22� 32� 0.5 10 13 lbs.
Sprite Dolly 14.5� 31� 26.5� 10 lbs.
27AGA Sprite Ganging Mechanism, Arm
Paint finishes:
Black (suffix BL)
Grey (suffix SL)
Lime (suffix LI)
Navy (suffix NA)
Red (suffix RD)
White (suffix WV)
Leg finish:
Chrome (suffix C)
Note:
Arm and shell finishes have the same
finish codes.
Maintenance:
See pages 27-28.
Cal 133 Fire Code f:
The Sprite chair complies with Cal 133
fire code unupholstered and with
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Note:
The Sprite Chair in Maple, Exotic Alpi
and Veneer finishes are Greenguard
certified.
90
Construction
Shell:
Molded plywood shell made of six layers
of maple and three layers of adhesive.
Alpi Veneers:
Reconstituted veneers made of both
plantation poplar and Obece/Ayous, a
bland African wood from a well managed
source with a long term forestry
management plan.
Paint:
Smooth highly durable paint.
Edge finish:
On chairs painted one color, edge will be
painted. For chairs in two-tone
combination or with veneer option, edge
will be natural maple. For chairs in
exotic Alpi veneer finishes, edges are
natural maple. For high use applications,
maple or veneer options are
recommended.
Base:
5 /8� tubular steel with mirror chrome
finish. Shell connected to the seat with
four screws. Four rubber bumpers assure
proper stacking.
Upholstery:
Seat pad, upholstered in fabric or leather
with urethane foam. Water based glue
used for upholstery. Seat pad is attached
to chair by four screws.
Armpads:
Available in two versions: black self
skinning polyurethane pads (available on
painted or maple/veneer chairs) or
molded plywood (available on veneer or
maple chairs only)
Stacking:
Arm Sprite chairs with or without
seatpad can stack 4-6 high.
Transportation Dolly:
Chrome-plated steel frame with rubber
wheels. 4-6 Sprite arm chairs stack on a
dolly. Dolly with 10 armless chairs
measures:
53� hx40� wx29� d
Ganging Mechanism
Arm mechanism measures 10�. Device is
constructed of a low durometer
thermoplastic elastomer with a
neodymium magnet. When not in use,
the mechanism is easily stored
(magnetized) to the underside of the
chair.

Designer(s):
Vico Magistretti, 1999
Order Code
Example: 46C-W-L
46C Cirene armless stacking
chair
W White shell
L With ganging mechanism
Example: 46A-U-MA
46A-U Cirene arm chair,
upholstered
MA Brown Leather
Specify:
1. Pattern number
2. Shell color
3. Ganging option (suffix L)
For leather option, specify:
1. Pattern number
2. Textile selection
Vico Magistretti
Cirene Stacking Chair
description seat h arm h w d h weight
46A Arm chair, unupholstered 18� 24 3 /8� 22 5 /8� 20 1 /2� 29 1 /2� 14 lbs.
18� 24 3 /8� 22 5 /8� 20 1 /2� 29 1 /2� 14 lbs.
46A-U Arm chair, upholstered 18� 24 3 /8� 22 5 /8� 20 1 /2� 29 1 /2� 15 lbs.
46C Armless chair, unupholstered 18� 21� 21 1 /4� 29 1 /2� 11 lbs.
18� 21� 21 1 /4� 29 1 /2� 11 lbs.
46C-U Armless chair, upholstered 18� 21� 21 1 /4� 29 1 /2� 13 lbs.
59Dolly Dolly for 8 Cirene chairs,
unupholstered
L Arm / Armless chair with ganging
mechanism, installed, stored under seat
Ordering Information
Melamine Shell Finishes:
White (suffix W)
Paint Shell Finishes:
Charcoal (suffix CG)
Veneer Shell Finishes:
Maple (suffix KC)
Wengè-stained oak (suffix WE)
92
Transportation Dolly:
Aluminum frame with rubber wheels. Up
to 8 Cirene chairs can be loaded on the
dolly. Dolly with 6 chairs measures 39�
high, 8 chairs measures 43� high.
Stackability:
The Cirene unupholstered chair and
armchair stack 10 high. The upholstered
versions do not stack.
Ganging Mechanism:
Mechanism ships installed underneath
the seat. Composed of chrome-plated
steel, the hook stores underneath the seat
and pulls out for ganging. Chairs stack
with ganging mechanism installed. Add
suffix L to pattern number.
15 3 /4� 27 1 /2� 43 1 /8� 7 lbs.
Note:
For high use and high traffic areas, the
Cirene chairs with veneer or melamine
shell is recommended.
The Cirene Stacking Chair is Greenguard
certified.
Maintenance:
See pages 27-28.

pattern no. unuphol. fabric leather
46A(CG,W) $1,063.
46A-(KC,WE) 1,119.
46A-U( ) 1,441. 2,012.
46C-(CG,W) 883.
46C-(KC,WE) 936.
46C-U( ) 1,340. 1,917.
59Dolly 1,043.
L 112.
Construction
Description:
Molded plywood shell in natural veneer
finish (maple, wengè); smooth paint
finish (charcoal); melamine finish with
plywood edge (white). Frame is
chrome-plated tubular steel. Arm chair
features black polypropylene molded
armpads. Armpads are not removable
and cannot be retrofitted.
Fabric & Leather cover:
Cirene can be ordered with full cover.
Plywood-shell is covered with pad and
fabric/leather is attached with velcro on
the underside of the chair. Cover is not
removable.
Approved Textiles
Trevira textile colors:
Plain weave cross-dye fabrics:
Blue (F941741)
Orange (F941511)
Red (F941521)
Basket weave cross-dye fabrics:
Navy (F941796)
Ash (F941396)
Tweed (F941106)
Black (F941198)
93
Leather colors:
Brown (MA)
Black (NE)
White (BI)
For samples of leathers and fabrics,
please contact your KnollStudio sales
representative.
KnollStudio

Designer(s):
Marco Maran, 2000
Order Code
Example: 87C-014
87C Gigi armless stacking chair
014 Black shell
Specify:
1. Pattern number
2. Shell finish
3. Textile selection
Marco Maran
Gigi� Arm and Armless Chair
description seat h arm h w d h
textile
fabric yds. weight
87A Arm chair, stacking 18� 26 1 /2� 22� 20� 34 1 /4� 14 lbs.
87C Armless chair, stacking 18� 19 3 /4� 20� 34 1 /4� 11 lbs.
87C-K-N Armless chair with seat pad,
non-stacking
87C-K-S Armless chair with seat pad,
stacking
18� 19 3 /4� 20� 34 1 /4� 0.7 12 lbs.
18� 19 3 /4� 20� 34 1 /4� 0.7 13 lbs.
87Dolly Dolly for 10 Gigi chairs 19.2� 31� 26 1 /2� 11 lbs.
87Tablet Folding tablet arm, right for
armless chair
87GA Gigi ganging mechanism
Ordering Information
Shell finishes:
Black (suffix 014)
Graphite (suffix 003)
Mango (suffix 006)
Navy (suffix 012)
Red (suffix 007)
White (suffix 001)
KnollStudio 20-Day Program:
Gigi arm and armless chair is available
on the 20-day program in white, graphite,
black, red and navy. For specific
ordering information consult pages
27-28.
Upholstery/Com information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information, please see
page 20.
94
Maintenance:
See pages 27-28.
Stacking feature:
Gigi armless unupholstered chairs stack
4 high.
Gigi armless chairs with seat pad and
bumper stack 4 high.
Gigi with seat pad and stacking bumper
stack 8-10 high on a dolly.
Gigi with seatpad without bumper
(87CK-N) does not stack.
Gigi arm chair stacks 4 high on floor and
dolly.
Note:
The Gigi Chair is Greenguard certified.
9 3 /4� 12�
Construction
Description:
Coloured polypropylene shell on a
chrome-plated base. Arm chairs have
black polypropylene molded arm pads.
Chair back flexes for comfort. Gigi chairs
are easily cleaned in food areas and work
with a booster seat.
Seat Pad:
Seat pad is permanently attached to the
seat with bolts in the factory. Seat pad is
not retrofittable in the field. Constructed
of ABS with high resilient foam.
Stacking bumper:
Black flexible urethane stacking pad
secured between base and shell.
Transportation Dolly:
Chrome plated steel frame with rubber
wheels. 10 Gigi chairs can be stacked on
the dolly. Dollies can stack three high for
compact storage. Dolly with 10 chairs
will measure 56.3� h, 19.75� w, 41� d.

pattern no. unuphol. A
87A-( ) $579.
87C-( ) 367.
COM
B C D E F G H I
87C-K-N-( )-( ) 734. 758. 782. 804. 825. 840. 864. 913. 947.
87C-K-S-( )-( ) 775. 798. 821. 844. 867. 882. 906. 951. 989.
87Dolly 612.
87TABLET 250.
87GA 31.
Tablet Arm:
The tablet attaches to the chair frame
underneath the seat. It is aligned with
the front leg and has a flip up
mechanism. Tablet is black melamine.
Steel support with chrome finish. Tablet
arm can be used with armless chair only.
Gigi with tablet can be stacked 4 high on
the floor and on the dolly.
Note:
Tablet arm option is not offered with
stacking bumper.
Ganging Mechanism:
The easy-to-detach ganging mechanism
links two adjoining frames at the front
legs or rear legs. Ganging mechanism
consists of black molded polypropylene.
Chairs with ganging mechanism can be
stacked. Tablet arm ships seperate from
the chair and can be retrofitted in the
field. Arm chairs can not be ganged with
armless chairs.
Approved KnollTextiles Grades/Fabric
A
Alignment
Analogy
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarch
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Close Knit
Digit
Dovetail
Fast Forward
Field Day
B continued
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Utmost
Wide Angle
Zephyr
C
Atlas
Autobahn
Biota
Charm
Circa
95
C continued
Decade
Earthwork
Echo
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
C continued
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Ultrasuede
KnollStudio
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Gates
Galloway
Jaipur
Mepal
Sandis
Stirling
Walker
Worth
Check with your KnollTextiles
representative for changes or additions.

Designer(s):
Marco Maran, 2002
Order Code
Example: 87AS-006
87AS Gigi arm swivel chair
006 Mango shell
Specify:
1. Pattern number
2. Shell finish
Marco Maran
Gigi� Barstool and Swivel Chair
description
seat h,
min
seat h,
max
arm h,
min
arm h,
max w d h, min h, max weight
87CS Gigi armless swivel chair 17 1 /4� 22 1 /2� 22 8 /10� 25� 33 1 /2� 38 1 /4� 17 lbs.
87AS Gigi arm swivel chair 17 1 /4� 22 1 /2� 24 3 /4� 29 1 /4� 22 8 /10� 25� 33 1 /2� 38 1 /4� 21 lbs.
87CM Gigi barstool, counter-height 24� 19 3 /4� 20� 40 1 /2� 14 lbs.
87CH Gigi barstool, bar-height 29 1 /2� 19 3 /4� 20� 46� 15 lbs.
Ordering Information
Shell Finishes:
Black (suffix 014)
Graphite (suffix 003)
Mango (suffix 006)
Navy (suffix 012)
Red (suffix 007)
White (suffix 001)
96
KnollStudio 20-Day Program:
Gigi counter and bar height barstool is
available on the 20-day program in
white, graphite, black, red and navy. For
specific ordering information consult
pages 27-28.
Maintenance:
See pages 27-28.
Note:
The Gigi Stool and Swivel Chair are
Greenguard certified.
Construction
Description:
Coloured polypropylene and 15%
fiberglass shell on a chrome-plated base.
Arm chairs have black polypropylene
molded arm pads. Chair back flexes for
comfort. Gigi chairs are easily cleaned in
food service areas.
Swivel:
Swivel mechanism with pneumatic seat
height adjustment T-section polished
aluminum base, with hard black casters.
Colored polypropylene shell on a
chrome-plated base. Armchairs have
black polypropylene molded armpads.

pattern no.
KnollStudio
87CS-( ) $996.
87AS-( ) 1,155.
87CM-( ) 705.
87CH-( ) 705.
97

Designer(s):
Marco Maran, 2005
Order Code
Example: 78-OR-C
78 X3 Stacking chair
OR Tangerine shell
C Chrome base
Specify:
1. Pattern number
2. Finish option
3. Chrome base
Marco Maran
X3 Chair and Barstool
description seat h w d h weight
78 X3 Stacking chair 17 1 /4� 21� 18 1 /2� 30 1 /4� 16 lbs.
78CM X3 Barstool, counter-height 24 1 /2� 19 1 /2� 15� 37 1 /2� 19 lbs.
78CH X3 Barstool, bar-height 29 1 /2� 19 1 /2� 15� 42 1 /2� 20 lbs.
X3Dolly Dolly for 15 X3 chairs 19.2� 31� 26 1 /2� 10 lbs.
Ordering Information
Finishes:
Clear, Silver (suffix CS)
Clear, Gold (suffix CG)
Lime (suffix GE)
Sapphire (suffix BU)
Smoke (suffix SU)
Tangerine (suffix OR)
98
Maintenance:
See pages 27-28.
Note:
The X3 Collection is Greenguard
certified.
Construction
Frame:
Sled base constructed of chrome-plated
steel. Base is polished chrome finish.
Shell:
One piece seat shell, constructed by the
bi-injection of transparent polycarbonate
and a Desmopan lattice.

pattern no.
78-( )-C $697.
78CM-( )-C 1,145.
78CH-( )-C 1,145.
87DOLLY 612.
Stackability:
Chair stacks 15 on the floor. Barstool
does not stack.
Glides:
4 white nylon glides included with the
chair.
Transportation Dolly:
Dolly is chrome plated steel with rubber
wheels. 15 chairs stack on the dolly.
99
KnollStudio

Designer(s):
Ludwig Mies van der Rohe, 1930
Design from the Mies van der
Rohe Archive of The Museum of
Modern Art
Award(s):
The Museum of Modern Art, New
York, USA, 1977
Order Code
Example: 245A-S-P-VO906-PERF
245A Tubular Tugendhat arm
chair, thin seat
S Stainless Steel
P Perforated leather
VO906- Volo, Navy, perforated
PERF
Note:
The Tubular and Flat Bar Brno chairs are
part of a collection. Please refer to Mies
side chairs and lounge seating beginning
on page 100 and tables, beginning on
page 210.
Specify:
1. Pattern number
2. Glide option
3. Cal 133 Fire Code option
4. Perforated leather option
5. Textile selection
Ludwig Mies van der Rohe
Tubular Brno Chair
description frame
245A Brno Tugendhat arm chair - tubular
frame, with thin seat and back
245AT Brno Classic arm chair - tubular
frame, with thick seat and back
G Glides (add -G to end of pattern number)
P Perforated leather option (add P to end of
pattern number and suffix -PERF to leather
selection)
Ordering Information
Finishes:
Polished Chrome (suffix C)
Stainless Steel (suffix S)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Woven leather option:
The Tubular Brno Chairs can be
upholstered in woven leather as a COL.
30 sq. ft. of woven leather required.
Specify suffix -W after pattern number.
seat
h
arm
h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
polished chrome 17 1 /4� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 20 lbs.
stainless steel 17 1 /4� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 20 lbs.
polished chrome 17 1 /4� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 22 lbs.
stainless steel 17 1 /4� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 22 lbs.
100
Perforated leather option:
The Tubular Brno Chairs are available in
perforated leather upholstery. Specify
suffix -P at end of pattern number and
suffix -PERF at end of leather selection.
30 sq. ft. of leather required.
Cal 133 Fire Code f:
The Tubular Brno Chairs comply with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe are stamped
into the frame of the chair under the arm.
The Tubular Bar Brno Chair is
Greenguard certified.
30
Construction
Frame:
Stainless steel:
Tubular pre-stressed, pre-buffed 14
gauge stainless steel. Clean, seamless
joints and hidden drilled or countersunk
holes (as opposed to punched) render the
chair free of deformation.
Polished chrome:
11 gauge steel. The mirror
chrome-plating process includes lengthy
nickel and silicone coatings for rust
protection and increased durability. All
chairs are polished to a mirror finish.
Clean, seamless joints and hidden drilled
or countersunk holes (as opposed to
punched) render the chair free of
deformation.
Upholstery:
Inner hardwood frame cushioned with
variable density foam. Dymetrol seat
suspension enhances comfort level.
Replacement seat and backs are not
available on Brno chairs. Tubular Brno
with thin seat (245A, 245AS) has no welt
detail. Tubular Brno with thick seat
(245AT, 245AB) has welt detail on
underside of seat.
Optional glides:
Six clear plastic glides in specially
drilled holes.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
245A-C $1,828. $1,884. $1,938. $1,979. $2,016. $2,049. $2,086. $2,178. $2,341. $2,530. $2,714. $3,080. $3,169. $3,249.
245A-S 2,364. 2,420. 2,475. 2,515. 2,552. 2,585. 2,622. 2,714. 2,877. 3,066. 3,250. 3,616. 3,706. 3,785.
245AT-C 2,092. 2,147. 2,203. 2,245. 2,279. 2,313. 2,349. 2,440. 2,605. 2,793. 2,976. 3,345. 3,435. 3,512.
245AT-S 2,618. 2,673. 2,728. 2,770. 2,805. 2,838. 2,875. 2,966. 3,131. 3,319. 3,502. 3,871. 3,961. 4,038.
G 23.
P 740.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chromaf
Classic Boucle
Close Knit
B continued
Digit
Digital Tape
Dovetailf
Fairway
Fast Forward
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
C continued
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
101
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressed
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Ludwig Mies van der Rohe, 1930
Award(s):
The Museum of Modern Art, New
York, USA, 1977
Order Code
Example: 255A-S-DL301
255A Flat bar arm chair, with
armpads
S Stainless Steel
DL301 Ducale, Aqua
Note:
The Tubular and Flat Bar Brno chairs are
part of a collection. Please refer to Mies
side chairs and lounge seating, beginning
on page 100 and tables, beginning on
page 210.
Specify:
1. Pattern number
2. Glide option
3. Cal 133 Fire Code option
4. Textile selection
Ludwig Mies van der Rohe
Flat Bar Brno Chair
description frame
255A Brno arm chair, flat bar frame, with
armpads
255C Brno arm chair, flat bar frame, without
armpads
P Perforated leather option (add P to end of
pattern number and suffix -PERF to leather
selection)
G Glides (add -G to end of pattern number)
Ordering Information
Finishes:
Polished Chrome (suffix C)
Stainless Steel (suffix S)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Woven leather option:
The 255CS Flat Bar Brno Chair without
armpads can be upholstered in woven
leather COL. 30 sq. ft. of woven leather
required. Specify suffix -W after pattern
number.
Perforated leather option:
The Flat Bar Brno Chairs without pads
are available in perforated leather
upholstery. Specify suffix -P at end of
pattern number and suffix -PERF at end
of leather selection. 30 sq. ft. of leather
required.
seat
h
arm
h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
polished chrome 17 1 /2� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 47 lbs.
stainless steel 17 1 /2� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 36 lbs.
polished chrome 17 1 /2� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 43 lbs.
stainless steel 17 1 /2� 25 3 /4� 22 3 /4� 22 1 /2� 31 1 /2� 1.7 28 36 lbs.
102
Cal 133 Fire Code f:
The Brno chair 255 complies with
California Technical Bulletin 133 in
selected upholstery in all versions.
Specify suffix -C at end of pattern
number. Upcharge applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe are stamped
into the frame under the arm of the chair.
The Flat Bar Brno Chair is Greenguard
certified.
30
Construction
Frame:
Stainless steel:
Stainless steel frame is 304 bar stock
stainless steel. Frame is hand-grained
and hand-buffed to mirror finish. No
visible connections between seat and
frame. Seat and back constructed of
durable hardwood.
Polished chrome:
Frame is chrome-plated on steel frame.
Available with or without arm pads.
Upholstery:
Inner hardwood frame cushioned with
variable density foam. Dymetrol seat
suspension enhances comfort level.
Replacement seat and backs are not
available on Brno chairs. Flat Bar Brno
Chair with and without armpads has welt
detail on underside of seat and outside of
back. Optional armpads have welt
around perimeter.
Optional glides:
Four charcoal-colored nylon glides
recessed in base of frame.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
255A-C $2,605. $2,665. $2,721. $2,763. $2,800. $2,834. $2,871. $2,964. $3,133. $3,324. $3,509. $3,886. $3,976. $4,057.
255A-S 3,900. 3,960. 4,016. 4,058. 4,094. 4,129. 4,165. 4,258. 4,428. 4,619. 4,804. 5,181. 5,271. 5,351.
255C-C 2,349. 2,406. 2,460. 2,503. 2,541. 2,573. 2,608. 2,698. 2,866. 3,055. 3,236. 3,605. 3,694. 3,770.
255C-S 3,625. 3,682. 3,736. 3,779. 3,817. 3,849. 3,884. 3,974. 4,142. 4,330. 4,512. 4,881. 4,970. 5,046.
P 740.
G 23.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chromaf
Classic Boucle
Close Knit
B continued
Digit
Digital Tape
Dovetail *f
Fairway
Fast Forward
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR *
Lore CR
Metro
Moto CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
C continued
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
103
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire *
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal *
North Island *
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped *
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derby *f
Fortef
Sabrinaf
X
Ducale *f
Ducale Velours *f
KnollStudio
Y
Caprif
Cervo
Copenhagen *
Cordovanf
Distressed *
Marissaf
Portofino *
Primaf
Rivaf
Saddle *f
Salon *f
f Approved for Cal 133 upholstery.
* Not approved for 255AS armpad
version
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Ludwig Mies van der Rohe, 1958
Order Code
Example: 257C-DV116
257C Four Seasons Stool
DV116 Ducale Velour, Lava
Specify:
1. Pattern number
2. Textile selection
Ludwig Mies van der Rohe
Four Seasons Stool
description w d seat h
textile fabric
yds.
req. leather
sq. ft. weight
257C Four Seasons Stool 17� 17� 30� 0.8 15 24 lbs.
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe are stamped
into the base of the stool.
The Four Season Stool is Greenguard
certified.
104
Construction
Frame:
Bent steel frame with chrome plating.
Upholstery:
Seat upholstered in leather or fabric over
foam cushion reinforced with a plywood
form.
Stitching:
Stitching detail is found on the rear left
hand corner of the stool.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
257C-( ) $2,780. $2,799. $2,816. $2,836. $2,851. $2,862. $2,882. $2,920. $2,947. $3,046. $3,116. $3,256. $3,287. $3,321.
Approved KnollTextiles Grades/Fabrics
A
Alignment
Analogy
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarch
Prep
Presto
Stacks
B
Abacus
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chroma
Classic Boucle
Close Knit
B continued
Digit
Digital Tape
Dovetail
Fairway
Fast Forward
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Atlas
Autobahn
Biota
Charm
Circa
Cricket
Decade
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Posh
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
C continued
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
105
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Cato
Galloway
Jaipur
Knoll Velvet
North Island
Stirling
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
X
Ducale
Ducale Velours
KnollStudio
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Saddle
Salon
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Mies van der Rohe, 1929 Design
from the Mies van der Rohe
Archive of The Museum of
Modern Art
Award(s):
The Museum of Modern Art, New
York, USA; Design Center
Stuttgart Award, W. Germany,
1978
Order Code
Example: 241LS-H01-VP03
241LS Chaise lounge
H01 Black cowhide straps
VP03 Velluto Pelle, Espresso
Example: 242LS-DE221-DE221
242LS Chaise lounge
DE221 Sandwiched Derby straps,
Brick
DE221 Derby, Brick
Note:
The Mies lounge chairs are part of a
collection. Please refer to Mies side
chairs and lounge seating beginning on
page 100, and tables, beginning on page
210.
Specify:
1. Pattern number
2. Strap selection
3. Textile selection
Ludwig Mies van der Rohe
MR Lounge Seating
description frame seat h arm h w d h
req.
leather
sq. ft. weight
241LS MR chaise lounge Cowhide straps 23 1 /2� 47 1 /4� 37 1 /2� 72 39 lbs.
Sandwiched straps 23 1 /2� 47 1 /4� 37 1 /2� 106 39 lbs.
242LS MR adjustable chaise lounge Cowhide straps 19 1 /2� 25 1 /2� 70 1 /4� 31 3 /4� 91 43 lbs.
Sandwiched straps 19 1 /2� 25 1 /2� 70 1 /4� 31 3 /4� 133 43 lbs.
247LS MR armless lounge chair Cowhide straps 15 3 /4� 23 1 /2� 34 3 /4� 33� 50 24 lbs.
Sandwiched straps 15 3 /4� 23 1 /2� 34 3 /4� 33� 75 24 lbs.
248LS MR lounge chair with arms Cowhide straps 15 3 /4� 23� 25 1 /2� 36 1 /4� 33� 50 32 lbs.
Sandwiched straps 15 3 /4� 23� 25 1 /2� 36 1 /4� 33� 75 32 lbs.
Ordering Information
Strap selection:
Cowhide belting frame supports to match
the following colors:
Black (suffix H01)
For colors other than black, leather
selected is sandwiched to belting
thickness on cowhide backing. Select
any approved Spinneybeck leather and
color.
Upholstery note:
Prices shown include leather upholstery
and strap selection. No Customer’s
Own Material can be used.
Note:
The MR Lounge Seating is Greenguard
certified.
106
Construction
Frame:
Seamless tubular stainless steel with a
polished finish. Glides not included.
Upholstery straps:
Black cowhide belting straps with front,
back, and sides all stained. For all other
colors, upholstery is sandwiched to
belting thickness on both front and back,
with sides left natural. Cowhide backing.
241LS contains 12 belting support
straps; 242LS contains 15 straps; 247LS
and 248LS contain 9 straps each.
Upholstery:
Leather is crafted in a series of quilted
and seamed cushion sections.

pattern no. U V W X Y
241LS-(H01) $11,149. $11,618. $12,571. $12,770. $13,001.
241LS-( ) 12,112. 12,800. 14,201. 14,494. 14,835.
242LS-(H01) 13,648. 14,241. 15,447. 15,695. 15,987.
242LS-( ) 14,836. 15,699. 17,459. 17,825. 18,253.
247LS-(H01) 7,382. 7,709. 8,370. 8,506. 8,668.
247LS-( ) 8,088. 8,575. 9,567. 9,775. 10,015.
248LS-(H01) 8,613. 8,939. 9,599. 9,737. 9,897.
248LS-( ) 9,319. 9,805. 10,797. 11,007. 11,246.
107
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Lucente
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Saddle
Salon
Check with your Spinneybeck
Representative for changes or additions.

Designer(s):
Ludwig Mies van der Rohe, 1927
Award(s):
The Museum of Modern Art, New
York, USA, 1977; Design Center
Stuttgart Award,
W.Germany, 1978
Order Code
Example: 256AS-L82
256AS MR side chair with arms
L82 Light Brown cowhide
Note:
The MR chairs are part of a collection.
Please refer to Mies side chairs and
lounge seating beginning on page 100
and tables, beginning on page 210.
Specify:
1. Pattern number
2. Cowhide selection
Ludwig Mies van der Rohe
MR Chair
description seat h arm h w d h weight
256AS MR side chair with arms 18� 27� 21� 32 1 /2� 31� 24 lbs.
256CS MR side chair, armless 18� 19 1 /4� 27 1 /4� 31� 17 lbs.
256AKIT Replacement sling kit with laces
for arm chair
256CKIT Replacement sling kit with laces
for armless chair
256LACE Replacement leather laces for
arm/armless chair
Ordering Information
Cowhide Selection:
Black(suffix L80)
Light Brown (suffix L82)
White Beige (suffix L84)
Upholstery/COM information:
Prices shown include leather upholstery.
No Customer’s Own Material is
available.
108
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe is stamped
into the base of the MR chair. Every
piece of furniture has an individual
production number of identification and
authenticity.
The MR Chair is Greenguard certified.
Maintenance:
See pages 27-28.
Construction
MR CHAIR
Frame:
Tubular stainless steel in polished finish.
Upholstery:
Thick cowhide sling with leather laces.
Glides:
Four molded clear plastic glides with
twin-pin snap-in construction included
with all MR chairs.
Replacement Slings:
Slings can be replaced in the field by
field services or a furniture repair
specialist. Kit includes back and seat
replacement slings with laces. Slings
should be fitted by field services or by a
professional reupholsterer.

pattern no.
KnollStudio
256AS-L( ) $3,046.
256CS-L( ) 1,942.
256AKIT-L( ) 933.
256CKIT-L( ) 933.
256LACE-L( ) 72.
109

Designer(s):
Mies van der Rohe, 1929
Award(s):
The Museum of Modern Art, New
York, USA, 1977
Order Code
Example: 250LS-DV116
250LS Barcelona chair
DV116 Ducale Velour, Lava
Note:
Barcelona lounge seating and couch are
part of a collection. Please refer to Mies
side chairs and lounge seating beginning
on page 100 and tables, beginning on
page 210.
Specify:
1. Pattern number
2. Cal 133 Fire Code option (chair and
stool only)
3. Leather selection
Ludwig Mies van der Rohe
Barcelona� Lounge Seating
description frame straps seat h
bolster
h w d h
req.
leather
sq. ft. weight
250L Barcelona chair chrome 17� 29 1 /2� 30� 30 1 /4� 50 47 lbs.
stainless 17� 29 1 /2� 30� 30 1 /4� 50 53 lbs.
251Y Barcelona stool chrome 14 3 /4� 25� 23 1 /4� 14 3 /4� 25 28 lbs.
stainless 14 3 /4� 25� 23 1 /4� 14 3 /4� 25 31 lbs.
251YC-L80 Barcelona stool with cowhide
sling
chrome 12 1 /4� 21 1 /2� 23� 12 1 /4� n/a 26 lbs.
250LC-S Child’s Barcelona chair chrome 14� 24� 24� 25� 32 41 lbs.
251YC-S Child’s Barcelona stool chrome 12� 19� 18� 12� 15 25 lbs.
258L Barcelona couch stainless black 15.35� 25� 39� 78� 25� 110 84 lbs.
stainless colors 15.35� 25� 39� 78� 25� 110 84 lbs.
Ordering Information
Upholstery note:
Prices shown include leather upholstery
and strap selection. No Customer’s
Own Material can be used.
KnollStudio 20-day Program:
The Barcelona chair and stool are
available on the KnollStudio 20-day
program with black volo leather and a
chrome base. For specific information,
consult pages 29-32.
110
Cal 133 Fire Code f:
The Barcelona Lounge Chair and Stool
comply with California Technical
Bulletin 133. Specify suffix -C after
pattern number. Upcharge applies, see
page 18.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe is stamped on
each piece.
The Barcelona Lounge Seating
Collection is Greenguard certified.
The Child’s Barcelona chair and stool are
compliant to the Consumer Product
Safety Improvement Act of 2008 for
Children’s Products, 16 C.F.R. 1303,
CPSIA Title 1 Section 101 for Total Lead
in Substrates and Surface Coatings.
Construction
BARCELONA CHAIR AND STOOL
Stainless Steel Frame:
Premium grade 304 bar stock stainless
steel. Single piece construction ensures
long-term durability. Frame is shaped,
welded and hand-buffed to mirror finish.
Upholstery straps attached with solid
stainless steel screws.
Chrome Frame:
Hand-ground and hand-buffed to a
mirror finish. Upholstery attaches with
aluminum rivets.
Upholstery straps:
Cowhide belting straps. Side and
all sides are dyed to match specified
upholstery color. Chair contains 17
belting support straps; stool 7. Child’s
Chair contains 13 belting support straps;
stool 7.

pattern no. cowhide U V W X Y
250LC $6,958. $8,567. $9,116. $9,228. $9,361.
250LS 10,626. 10,992. 11,650. 11,764. 11,943.
251YC 3,289. 4,043. 4,317. 4,374. 4,439.
251YS 6,149. 6,312. 6,639. 6,718. 6,788.
251YC-L80 2,255.
250LC-S 5,907. 7,274. 7,739. 7,835. 7,948.
251YC-S 2,792. 3,433. 3,665. 3,714. 3,769.
258LS-(HO1) 12,159. 12,626. 13,577. 13,775. 14,005.
258LS-( ) 13,099. 13,779. 15,163. 15,450. 15,785.
Upholstery:
Chair has 40 individual panels for the
chair and 18 for the stool; Child’s Chair
has 40 individual panels for the chair
and 16 for the stool. Individual panels
are cut, hand-welted, and hand-tufted
with leather and buttons produced from a
single cowhide. Cushions are premium
quality, highly resilient urethane foam
with down-like dacron polyester fiberfill.
Child’s Barcelona Chair and Stool:
The Child’s Barcelona Chair and Stool is
80% scale of standard size.
BARCELONA STOOL WITH COWHIDE
SLING:
Thick cowhide sling in black with nylon
laces on a chrome frame.
BARCELONA COUCH
Platform:
Hardwood frame is Sapele Mahogany
from Africa. Wood has oak-like strength
and is characterized by a dark or
reddish-brown color. Frame is finished
with a protective clear lacquer finish. 11
thick cowhide leather straps over rubber
webbing.
Legs:
Tubular steel in polished stainless steel
finish.
Bolster:
Bolster in matching leather is secured to
cushion platform with straps complete
with lock snaps.
111
Upholstery straps:
Cowhide belting straps with front, back,
and side edges all stained to match
specified upholstery color. For black
straps, specify option (HO1). For
matching straps in all other colors,
specify leather upholstery selection and
straps will be produced to match. Couch
contains 11 belting support straps over
rubber webbing.
Upholstery:
72 individual panels are cut,
hand-welted and hand-tufted with
leather and buttons produced from a
single cowhide. Cushions are premium
quality, fire retardant, high resilient
urethane foam with down-like dacron
polyester fiberfill.
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucente
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your Spinneybeck
Representative for changes or additions.

Designer(s):
Ludwig Mies van der Rohe, 1930
Design from the Mies van der
Rohe Archive of The Museum of
Modern Art
Order Code
Example: 751-AWE-DV112
751 Krefeld lounge chair
AWE Wenge legs
DV112 Ducale Velour, Brandy
Example: 752-AWA-K1026/3-VO904
752 Krefeld settee
AWA Light Walnut legs
K1026/3 Cross Stitch, Windsor
VO904 Volo, Stallion welt
Krefeld lounge seating is part of a
collection. Please refer to Mies side
chairs and lounge seating beginning on
page 100 and tables, beginning on page
210.
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Leather Welt selection, specify:
1. Pattern number
2. Leg finish
3. Textile selection
4. Leather Welt Selection (upcharge
applies)
Ludwig Mies van der Rohe
Krefeld Collection
description seat h arm h w d h type
textile
fabric
yds.
req.
leather
sq. ft. weight
751 Lounge chair 19� 25� 32� 27� 30� 6.5 80 59 lbs.
Lounge Chair in textile with leather welt
option
welt 21
uphol. 6.5
752 Settee 19� 25� 57� 27� 30� 8 120 93 lbs.
Settee in textile with leather welt option welt 25
uphol. 8
753 Sofa 19� 25� 82� 27� 30� 11 160 122 lbs.
Sofa in textile with leather welt option uphol. 11
welt 34
754 Ottoman 17� 26� 20 1 /2� 17� 3 50 17 lbs.
Ottoman in textile with leather welt option welt 15
uphol. 3
Ordering Information
Leg finishes:
Clear Oak (suffix AOC)
Deep Red Mahogany (suffix AF)
Light Walnut (suffix AWA)
Medium Cherry (suffix AM)
Wenge (suffix AWE)
Leather Welt Option:
The Krefeld collection may be specified
with an optional leather welt option. Welt
contours all edges, including cushions.
Please specify pattern number with LT
suffix and add appropriate leather
upcharge for total list price of the piece.
Leather welt option is available on textile
upholstery only.
Cal 133 Fire Codef:
The Krefeld Lounge Collection complies
with California Technical Bulletin 133.
Specify suffix -C after pattern number.
Upcharge applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The Krefeld Collection is Greenguard
certified.
112
Construction
Frame:
Inner frame in engineered hardwood and
plywood. Legs are removable, and are
attached to metal plate attached to frame.
Coil spring suspension for enhanced
comfort. Dynamic suspension in the back
for added flexibility and support. Legs
are ash hardwood stained (in wenge,
medium cherry, deep red mahogany,
walnut and clear oak).
Upholstery:
High-density foam cushions with dacron
top layer. Benches and ottoman feature
dual density foam for added softness and
support. Side panel upholstery is tailored
to fit, seat and back cushions are more
loose.
Inside dimensions:
751 Lounge Chair:
d: 21�
w: 26� *
752 Settee:
d: 21�
w: 51� *
753 Sofa:
d: 21�
w: 76� *
*Width measured at the inside of the
front of the arms. The chair tapers back,
resulting in less width at the back of the
chair than the front.

Designer(s):
Ludwig Mies van der Rohe, 1930
Design from the Mies van der
Rohe Archive of The Museum of
Modern Art
Order Code
Example: 751-AWE-DV112
751 Krefeld lounge chair
AWE Wenge legs
DV112 Ducale Velour, Brandy
Example: 752-AWA-K1026/3-VO904
752 Krefeld settee
AWA Light Walnut legs
K1026/3 Cross Stitch, Windsor
VO904 Volo, Stallion welt
Krefeld lounge seating is part of a
collection. Please refer to Mies side
chairs and lounge seating beginning on
page 100 and tables, beginning on page
210.
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Leather Welt selection, specify:
1. Pattern number
2. Leg finish
3. Textile selection
4. Leather Welt Selection (upcharge
applies)
Ludwig Mies van der Rohe
Krefeld Collection
description seat h arm h w d h type
textile
fabric
yds.
req.
leather
sq. ft. weight
755 Medium Bench 17� 51� 20 1 /2� 17� 5 64 21 lbs.
Medium Bench in textile with leather welt
option
welt 20
uphol. 5
756 Large Bench 17� 76� 20 1 /2� 17� 5.5 80 45 lbs.
Large Bench in textile with leather welt
option
Ordering Information
Leg finishes:
Clear Oak (suffix AOC)
Deep Red Mahogany (suffix AF)
Light Walnut (suffix AWA)
Medium Cherry (suffix AM)
Wenge (suffix AWE)
Leather Welt Option:
The Krefeld collection may be specified
with an optional leather welt option. Welt
contours all edges, including cushions.
Please specify pattern number with LT
suffix and add appropriate leather
upcharge for total list price of the piece.
Leather welt option is available on textile
upholstery only.
Cal 133 Fire Codef:
The Krefeld Lounge Collection complies
with California Technical Bulletin 133.
Specify suffix -C after pattern number.
Upcharge applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The Krefeld Collection is Greenguard
certified.
114
Construction
Frame:
Inner frame in engineered hardwood and
plywood. Legs are removable, and are
attached to metal plate attached to frame.
Coil spring suspension for enhanced
comfort. Dynamic suspension in the back
for added flexibility and support. Legs
are ash hardwood stained (in wenge,
medium cherry, deep red mahogany,
walnut and clear oak).
Upholstery:
High-density foam cushions with dacron
top layer. Benches and ottoman feature
dual density foam for added softness and
support. Side panel upholstery is tailored
to fit, seat and back cushions are more
loose.
welt 20
uphol. 5.5
Inside dimensions:
751 Lounge Chair:
d: 21�
w: 26� *
752 Settee:
d: 21�
w: 51� *
753 Sofa:
d: 21�
w: 76� *
*Width measured at the inside of the
front of the arms. The chair tapers back,
resulting in less width at the back of the
chair than the front.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
755-( )-( ) $2,384. $2,509. $2,630. $2,765. $2,872. $2,952. $3,085. $3,339. $3,526. $3,784. $4,103. $4,755. $4,890. $5,047.
upchg, welt 781. 881. 1,087. 1,131. 1,180.
755LT-( )-( )-( ) 2,384. 2,509. 2,630. 2,765. 2,872. 2,952. 3,085. 3,339. 3,526.
756-( )-( ) 2,766. 2,934. 3,097. 3,275. 3,421. 3,526. 3,702. 4,043. 4,293. 4,930. 5,381. 6,295. 6,484. 6,707.
upchg, welt 805. 905. 1,111. 1,155. 1,205.
756LT-( )-( )-( ) 2,766. 2,934. 3,097. 3,275. 3,421. 3,526. 3,702. 4,043. 4,293.
Approved KnollTextiles Grades/Fabrics
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Mariner
Metaphor
Monarchf
Prepf
Stacks
B
Abacusf
Bank Shot
Belize
Bifold CR
Chromaf
Classic Boucle
B continued
Digit
Fairway
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyricf
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochetf
Sparkf
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
C continued
Hula Hoop
Kora CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Quark
Rio
Roundtrip
Sahara
Sequin CR
Star Struck
Stepping Stones
Swing
Transitionf
Vibe
Zari CR
115
D
Cavalier
Eclat Weave
Harrison
Hologram
Masquerade
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
F continued
Eclipse
Groove Line
Icon
Rivington
Topography
G
Brugge
Garden City
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Lyonese Velvet
I
Byron
Cato
Galloway
Gates
Knoll Velvet
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tippedf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Fortef
Sabrinaf
KnollStudio
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
George Nakashima, 1946
Order Code
Example: N19-AW
N19 Straight Chair
AW American Walnut
Note:
The Straight chair is part of a collection.
Please refer to the Splay-Leg table on
page 220.
Specify:
1. Pattern number
2. Finish
George Nakashima
Straight Chair
description seat h w d h weight
N19 Straight Chair 17 1 /4� 22 1 /2� 17 1 /2� 30� 11 lbs.
Ordering Information
Finishes:
American Walnut (suffix AW)
Maintenance:
See pages 27-28.
Note:
The Straight Chair is Greenguard
certified.
Each chair features George Nakashima’s
signature under the seat.
116
Construction
Frame:
Constructed from solid American
Walnut, turned American Walnut legs
and stretchers, and contrasting Hickory
spindles, clear low-sheen finish and
nylon glides.
Note:
American Walnut exhibits a high
degree of natural color
characteristics, ranging from
chocolate, grey and
purplish-browns to deep honey.
Color variation will soften and
become more uniform over time.

pattern no.
KnollStudio
N19-AW $975.
117

Designer(s):
Jorge Pensi, 1988
Award(s):
First Place, Sidi Selection,
Valencia, Spain, 1988; ‘‘Delta
Plate’’ of ADI FAD, 1988; Design
Center Stuttgart Award, W.
Germany, 1990
Order Code
Example: 29C-29K-K161/1
29C Toledo chair
29K Seat cushion option
K161/1 Classic Boucle, Pearl
Note:
Toledo Chairs are part of a collection.
Please refer to Pensi Tables on pages
224.
Specify:
1. Pattern number
2. Seat pad option
3. Textile selection
Jorge Pensi
Toledo Stacking Chair
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
29C Toledo Chair 17 3 /4� 27 1 /4� 21 5 /8� 21 1 /4� 29 7 /8� 15 lbs.
29K Toledo Chair, seat cushion replacement 0.6 7
Ordering Information
Note:
The Toledo Chair is available in the
United States only.
KnollStudio 20-Day Program:
The Toledo Chair is available on the
KnollStudio 20-Day program. For
specific information, consult pages 29 -
32.
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
118
Cal 133 Fire Codef:
The Toledo Chair without seat pad
complies with California Technical
Bulletin 133. See page 18.
Maintenance:
See pages 27-28.
Note:
Toledo Chairs are stamped under the seat
with the name of the designer and the
manufacturer, AMAT 3.
The Toldo Stacking Chair is Greenguard
certified.
Construction
Seat, back, arms:
Polished cast aluminum, thermo-treated.
Legs:
Anodized, polished tubular aluminum.
The Toledo chair is 100% recyclable.
Stacking feature:
Chairs can be stacked up to 4 high for
compact storage.
Outdoor use:
With proper preventative maintenance,
the Toledo Chair is appropriate for
outdoor environments. Aluminum will
not reflect extreme outdoor temperatures.
Optional seat pad:
Regardless of the textile, the seat pad is
not approved for outdoor use.
Toledo Stacking Chair is manufactured
in Spain by Amat-3.

pattern no.
29C $1,589.
grades
A
COM
B C D E F G H I
COL
U V W X Y
29K 224. 245. 262. 283. 298. 310. 331. 369. 400. 394. 439. 528. 547. 568.
Approved KnollTextiles Grades/Fabric
A
Alignment
Analogy
Bocce
Cat’s Cradle
Common Ground
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarch
Prep
Presto
Stacks
B
Abacus
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chroma
B continued
Classic Boucle
Close Knit
Digit
Digital Tape
Dovetail
Fairway
Fast Forward
Field Day
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Techno Tweed
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Atlas
Autobahn
Biota
Charm
Circa
Cricket
Decade
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sequin CR
C continued
Sahara
Sandpiper
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
119
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leathers
U
Vicenza
Volo
V
Acqua
Andes
Espana
Hand Tipped
Maremma
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Lucente
Sabrina
X
Ducale
Ducale Velours
KnollStudio
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Charles Pfister, 1971
Order Code
Example: 1051C-ST-R-H-K109/15
1051C Petite Pfister lounge chair
ST Tablet arm option
R Right handed tablet arm
H Caster option
K109/15 Haze, Persimmon
Specify:
1. Pattern number
2. Cal 133 Fire Code option
3. Tablet option (lounge chair only),
right or left
4. Caster option (lounge chair only)
5. Textile selection
Charles Pfister
Petite Lounge Seating
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
1051C-S Petite lounge chair 16� 24� 29 1 /2� 29 1 /2� 26� 6.5 117 39 lbs.
1051C-ST-( ) Petite Pfister lounge chair with
optional tablet arm
16� 24� 29 1 /2� 29 1 /2� 26� 6.5 117 41 lbs.
1052C-S Petite settee 16� 24� 53� 29 1 /2� 26� 10.8 194 64 lbs.
1053C-S Petite sofa 16� 24� 76 1 /2� 29 1 /2� 26� 15.0 270 88 lbs.
1059C-S Petite ottoman 22� 22� 16� 3.8 69 18 lbs.
H Optional casters for Petite lounge chair
Ordering Information
Tablet arm option (suffix ST),
lounge chair only:
Left handed (suffix L)
Right handed (suffix R)
Caster option (suffix H),
lounge chair only:
To specify four casters add -H to end of
pattern number before upholstery
selection.
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. Non-railroad COM
fabrics will require additional
yardage. For approval requirements,
processing instructions and ordering
information please see page 20.
Cal 133 Fire Codef:
Petite Pfister lounge seating complies
with California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 21.
Note:
The Petite Pfister Lounge Seating
Collection is Greenguard certified.
120
Construction
Frame:
Constructed in sections with a
combination plywood/hardwood seat and
back.
Upholstery:
Petite Pfister lounge seat and back
cushion are fully upholstered.
Double-needled top stitching on leather
upholstery and on thin solid textiles.
Single-needled top stitching on heavily
ribbed fabrics and multicolor prints. No
sag spring deck covered in black
cotton textile.
Swivel tablet:
Machined aluminum, post and socket
mechanism with black phenolic
rectangular tablet; swivels 360°.
Seat height:
Seat height is measured from the floor to
the crown of the seat cushion. Height
could vary up to 1 /2� depending on leather
or textile specified.
Glides:
Nylon, adjustable.
Cushion fill:
Polyester wrap: foam core with polyester
fiber wrap for tight, tailored aesthetic.

pattern no. upcharge
grades
A
COM
B C D E F G H I
COL
U V W X Y
1051C-S $2,255. $2,467. $2,670. $2,890. $3,072. $3,202. $3,422. $3,847. $4,280. $5,386. $6,144. $7,756. $8,006. $8,379.
1051C-ST-( ) 2,848. 3,060. 3,263. 3,483. 3,665. 3,795. 4,015. 4,440. 4,873. 5,979. 6,737. 8,349. 8,599. 8,972.
1052C-S 3,961. 4,309. 4,644. 5,007. 5,308. 5,524. 5,891. 6,589. 7,305. 9,174. 10,431. 13,103. 13,519. 14,137.
1053C-S 5,535. 6,023. 6,487. 6,998. 7,416. 7,718. 8,230. 9,204. 10,204. 12,835. 14,580. 18,297. 18,876. 19,737.
1059C-S 1,665. 1,783. 1,891. 2,012. 2,108. 2,179. 2,299. 2,525. 2,759. 3,516. 3,937. 4,832. 4,972. 5,179.
H n/c
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Mariner
Monarch
Prep
Stacks
B
Abacusf
Bank Shot
Belize
Betwixt
Bifold CR
Chromaf
Classic Boucle
B continued
Digit
Dovetail
Fairway
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
C continued
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerade
Obi
Plain Linen
Satelite
Satin Chisel
Zoom
121
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencerf
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvetf
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
fApproved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Charles Pfister, 1971
Order Code
Example: 1053C-MABLK
1053C Pfister sofa
MABLK Marissa, Black
Specify:
1. Pattern number
2. Cal 133 Fire Code option
3. Textile selection
Charles Pfister
Lounge Seating
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
1051C Standard lounge chair 16� 24� 33 1 /2� 33� 26� 7.2 130 44 lbs.
1052C Standard settee 16� 24� 60 1 /2� 33� 26� 12.4 224 73 lbs.
1053C Standard sofa 16� 24� 87� 33� 26� 17.6 318 101 lbs.
1059C Standard ottoman 27 3 /4� 27 3 /4� 16� 3.8 69 20 lbs.
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. Non-railroad COM
fabrics will require additional
yardage. For approval requirements,
processing instructions and ordering
information please see page 20.
Cal 133 Fire Codef:
Pfister lounge seating complies with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 21.
Maintenance:
To fluff standard Pfister cushions, turn
cushion upside down occasionally. See
also pages 27-28.
Note:
The Pfister Lounge Seating Collection is
Greenguard certified.
122
Construction
Frame:
Constructed in sections with a
combination plywood/hardwood seat and
back.
Upholstery:
Pfister lounge seat and back cushion are
fully upholstered. Double-needled top
stitching on leather upholstery and on
thin solid textiles. Single-needled top
stitching on heavily ribbed fabrics and
multicolor prints. No sag spring deck
covered in black cotton textile.
Seat height:
Seat height is measured from the floor to
the crown of the seat cushion. Height
could vary up to 1 /2� depending on leather
or textile specified.
Glides:
Nylon, adjustable.
Cushion fill:
Polyester wrap: foam core with polyester
fiber wrap for tight, tailored aesthetic.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
1051C $2,827. $3,052. $3,269. $3,506. $3,699. $3,840. $4,076. $4,531. $4,997. $6,244. $7,063. $8,793. $9,064. $9,467.
1052C 4,997. 5,388. 5,759. 6,167. 6,504. 6,743. 7,155. 7,934. 8,733. 10,899. 12,304. 15,291. 15,754. 16,445.
1053C 7,002. 7,556. 8,084. 8,665. 9,140. 9,482. 10,065. 11,171. 12,307. 15,420. 17,413. 21,653. 22,310. 23,295.
1059C 2,103. 2,226. 2,339. 2,463. 2,565. 2,639. 2,767. 3,004. 3,248. 4,060. 4,491. 5,409. 5,555. 5,766.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Mariner
Monarch
Prep
Stacks
B
Abacusf
Bank Shot
Belize
Betwixt
Bifold CR
Chromaf
Classic Boucle
B continued
Digit
Dovetail
Fairway
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
C continued
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Smart
Star Struck
Stepping Stones
Spectator
Swing
Transition
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerade
Obi
Plain Linen
Satelite
Satin Chisel
Zoom
123
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencerf
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvetf
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
fApproved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Charles Pfister, 1971
Order Code
Example: 1050C-3-K349/1
1050C-3 Pfister corner module
K349/1 Alignment, Sand
Specify:
1. Pattern number
2. Cal 133 Fire Code option
3. Textile selection
Charles Pfister
Sofa System
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
1050C Center module 16� 27 1 /4� 33� 26� 5.2 94 28 lbs.
1050C-1 End module, arm panel on right
side of user
1050C-2 End module, arm panel on left side
of user
16� 24� 30 1 /8� 33� 26� 6.2 112 36 lbs.
16� 24� 30 1 /8� 33� 26� 6.2 112 36 lbs.
1050C-3 Corner module 16� 24� 33� 33� 26� 7.0 126 41 lbs.
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered. Note: Non-railroad COM
fabrics will require additional yardage.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Note:
Modules shipped with unupholstered
sides unless specified. For upholstered
sides, contact your Knoll representative
for pricing. All modules shipped
knocked-down (KD), assembly required.
124
Cal 133 Fire Code f:
The Pfister Collection complies with
California Technical Bulletin 133 in
selected upholstery. Specify polyester
fiber wrap and suffix -C at end of pattern
number and suffix -133 at end of textile
selection. Upcharge applies, see page 18.
Seat height:
Seat height is measured from the floor to
the crown of the seat cushion. Height
could vary up to 1 /2� depending on leather
or textile specified.
Maintenance:
To fluff cushions, turn cushion upside
down occasionally. See also pages
27-28.
Note:
The Pfister Sofa System is Greenguard
certified.
Construction
Frame:
Constructed in sections with a
combination plywood/hardwood seat and
back.
Upholstery:
Pfister sofa system cushions are fully
upholstered. Coverings are upholstered
on both sides in fabric or leather.
Double-needled top stitching on leather
upholstery and thin solid textiles.
Single-needled top stitching on heavily
ribbed fabrics and multicolor prints. No
sag spring deck covered in black cotton
textile.
Cushion fill:
Polyester wrap: foam core with polyester
fiber wrap for tight, tailored aesthetic.
Glides:
Nylon, adjustable.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
1050C $2,156. $2,320. $2,472. $2,646. $2,787. $2,888. $3,061. $3,389. $3,723. $4,736. $5,325. $6,522. $6,774. $7,065.
1050C-1 2,674. 2,870. 3,058. 3,264. 3,428. 3,551. 3,754. 4,146. 4,544. 5,789. 6,492. 7,919. 8,216. 8,563.
1050C-2 2,674. 2,870. 3,058. 3,264. 3,428. 3,551. 3,754. 4,146. 4,544. 5,789. 6,492. 7,919. 8,216. 8,563.
1050C-3 3,301. 3,522. 3,731. 3,963. 4,153. 4,288. 4,519. 4,960. 5,411. 6,880. 7,667. 9,274. 9,610. 9,999.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Mariner
Monarch
Prep
Stacks
B
Abacusf
Bank Shot
Belize
Betwixt
Bifold CR
Classic Boucle
Chromaf
Digit
Dovetail
Fairway
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
B continued
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahn
Biotaf
Charm
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
C continued
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sequin CR
Sahara
Sandpiper
Smart
Star Struck
Stepping Stones
Spectator
Swing
Transition
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrisonf
Hologram
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
Zoom
125
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencerf
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Cato
Canaan
Cummings
Galloway
Gates
Jaipur
Knoll Velvetf
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Maremma
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
V
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Warren Platner, 1962
Award(s):
1966 American Institute of
Architects International Award
Order Code
Example: 1725A-N-K771/7
1725A Platner arm chair
N Nickel frame
K771/7 Techno Tweed, Quicksilver
Note:
Platner lounge seating is part of a
collection. Please refer to Platner tables
on page 230.
Specify:
1. Pattern number
2. Frame finish
3. Textile selection
Warren Platner
Seating Collection
description seat h w d h frame
textile
fabric
yds.
req.
leather sq
ft weight
1715L Lounge chair 18 1 /2� 36 1 /2� 25 1 /2� 30 1 /4� nickel 4.0 n/a 37 lbs.
18 1 /2� 36 1 /2� 25 1 /2� 30 1 /4� bronze 4.0 n/a 37 lbs.
1725A Arm chair 19� 26 1 /2� 22� 28 3 /4� nickel 1.8 35 21 lbs.
19� 26 1 /2� 22� 28 3 /4� bronze 1.8 35 21 lbs.
1719Y Stool 22 3 /4� 15 1 /4� 22 3 /4� nickel 1.1 20 12 lbs.
22 3 /4� 15 1 /4� 22 3 /4� bronze 1.1 20 12 lbs.
Ordering Information
Frame:
Metallic Bronze (suffix BRM)
Polished Nickel (suffix N)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
126
Maintenance:
See pages 27-28.
Note:
The Platner Seating Collection is
Greenguard certified.
Construction
Frame:
Forms created by vertical steel wire rods
welded to circular horizontal and
edge-framing rods. Finish in bright
nickel with clear lacquer protection or
painted bronze metallic.
Base:
Clear plastic extrusion ring for smooth
bottom surface.
Upholstery:
Molded fiberglass shell with molded
latex foam cushion. Cushions with latex
core and zipper cover attach to seat with
Velcro.

pattern no.
grades
A
COM
B C D E F G H I
1715L-N-( ) $6,794. $6,895. $6,991. $7,097. $7,183. $7,245. $7,352. $7,553. $7,702.
1715L-BRM-( ) 7,178. 7,279. 7,376. 7,481. 7,568. 7,630. 7,736. 7,938. 8,086.
COL
U V W X Y
1725A-N-( ) 3,900. 3,945. 3,989. 4,036. 4,076. 4,104. 4,151. 4,243. 4,310. 4,579. 4,754. 5,111. 5,185. 5,272.
1725A-BRM-( ) 4,211. 4,256. 4,300. 4,347. 4,387. 4,415. 4,462. 4,554. 4,621. 4,891. 5,065. 5,423. 5,497. 5,583.
1719Y-N-( ) 2,201. 2,228. 2,254. 2,283. 2,307. 2,324. 2,354. 2,410. 2,451. 2,585. 2,685. 2,889. 2,932. 2,981.
1719Y-BRM-( ) 2,298. 2,325. 2,351. 2,381. 2,405. 2,421. 2,452. 2,507. 2,548. 2,683. 2,782. 2,987. 3,029. 3,079.
Approved KnollTextiles Grades/Fabric
A
Bocce
Cat’s Cradle
Common Ground
Dristi
Mariner
Monarch
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Close Knit *
Dovetail
Fairway
Field Day
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Paradigm
Pogo
Pop
Ricochet
B continued
Spark
Spinoff Nuance
Spotlight
Starry Night
Techno Tweed
Triple Lace
Utmost
Wide Angle
Zephyr
C
Atlas * *
Autobahn *
Biota
Charm
Circa
Cricket * *
Earthwork
Echo
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
C continued
Highline CR
Hula Hoop
Kaleidoscope
CR**
Kora CR
Legend CR
Metro
Moto CR
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper * *
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones * *
Swing
Transition
Treble CR
Vibe**
Zari CR
D
Compass CR * *
Eclat Weave
Harrison
Hologram
Obi
Plain Linen *
Satellite *
Satin Chisel *
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
F
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
127
G
Brugge
Garden City
Gibson
Hampshire
Haze
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal * *
North Island
Sandis * *
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza * *
Volo**
V
Acqua * *
Andes * *
España**
Hand Tipped * *
Maremma * *
Velluto Pelle * *
W
Alaska * *
Amazon * *
Antique * *
Arizona * *
Derby * *
Forte * *
Sabrina * *
KnollStudio
X
Ducale * *
Ducale Velour * *
Y
Capri * *
Cervo * *
Copenhagen * *
Cordovan * *
Distressed * *
Marissa * *
Portofino * *
Prima * *
Riva * *
Saddle * *
Salon * *
*Approved for 1719Y stool only.
* *Not approved for 1715L lounge chair.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Charles Pollock, 1963
Order Code
Example: 12A-1-D5G-H-AM3030
12A Pollock arm chair
1 Polished aluminum
frame/stainless steel base
top caps
D5G Swivel/tilt control with
pneumatic seat height
adjustment
H Hard-wheel casters
AM3030 Amazon, Bossa Nova
Specify:
1. Pattern number
2. Frame/base top cap finish
3. Cal 133 Fire Code option
4. Textile selection
Charles Pollock
Executive Conference Arm and Armless Chairs
description seat h arm h w d h
12A-(1, 2, 3 or 4)-D5G-H Arm chair,
swivel/tilt, pneumatic height, seat height
adjustment
12C-(1, 2, 3 or 4)-D5G-H Armless chair,
swivel/tilt, pneumatic height, seat height
adjustment
textile
fabric
yds.
req.
leather
sq. ft. weight
18�-25� 24�-30� 26 1 /4� 28 1 /4� 31�-36� 1.1 20 44 lbs.
44 lbs.
18�-25� 23 1 /2� 28 1 /4� 31�-36� 1.1 20 41 lbs.
1250COVER Replacement cover
R Optional casters for hard floors (substitute
-R for -H in pattern number)
1250BUTTON Replacement buttons
(specify upholstery)
1.1 20
Ordering Information
Frame/base top cap finishes:
Polished aluminum/stainless steel
(suffix 1)
Satin anodized aluminum/brushed
stainless steel (suffix 2)
Black anodized aluminum/black epoxy
(suffix 3)
Black anodized aluminum/stainless steel
(suffix 4)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
Cal 133 Fire Codef:
The Pollock chair complies with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of upholstery selection. Upcharge
applies, see page 18.
Note:
The Pollock Executive Conference Arm
and Armless Chair is Greenguard
certified.
128
Construction
Outer shell:
Integrally colored, black textured
polypropylene.
Frame:
Extruded aluminum with polished, satin
or black anodized finish. Steel support
plate spans the width of the seat cushion.
Upholstery:
Multi-density urethane foam (4 1 /2�
maximum thickness); button tufting on
fabric and leather detail. Replacement
upholstery can be field installed.
Arms:
Seamless, black phenolic plastic.
Column cover:
Polypropylene on pneumatic seat height
models; steel with epoxy finish on
mechanical seat height models.
Base:
Steel armature with epoxy finish;
polished stainless or black epoxy
finished top caps. Standard five-star
design.
Standard casters:
Hard wheel casters standard.
41 lbs.
Controls:
360° swivel; tilt with tilt tension and
pneumatic seat height adjustment.
Replacement buttons:
Set of 6 buttons for one chair.
Replacement cover:
Must be installed by an upholsterer.

pattern no.
12A-(1 or
2)-D5G-H
12A-(3 or
4)-D5G-H
12C-(1 or
2)-D5G-H
12C-(3 or
4)-D5G-H
grades
A
COM
B C D E F G H I
COL
U V W X Y
$2,416. $2,456. $2,492. $2,522. $2,546. $2,568. $2,592. $2,652. $2,763. $2,864. $2,996. $3,292. $3,344. $3,375.
2,211. 2,251. 2,288. 2,317. 2,341. 2,363. 2,387. 2,447. 2,558. 2,660. 2,791. 3,087. 3,139. 3,171.
2,220. 2,257. 2,293. 2,319. 2,343. 2,364. 2,387. 2,446. 2,552. 2,652. 2,776. 3,062. 3,114. 3,141.
2,024. 2,062. 2,097. 2,123. 2,147. 2,168. 2,191. 2,251. 2,356. 2,457. 2,580. 2,866. 2,919. 2,946.
1250COVER 378. 413. 448. 472. 496. 514. 537. 593. 693. 784. 904. 1,174. 1,223. 1,249.
R n/c
1250BUTTON-
()
Approved KnollTextiles Grades/Fabric
A
Bocce
Cat’s Cradle
Common Groundf
Cotton Duck
Dristi
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shotf
Belize
Betwixtf
Chromaf
Classic Boucle
Close Knit
Digit
Dovetailf
Fairway
Field Dayf
Grande
Gusto CR
Knoll Feltf
Knoll Hopsackf
Lyric
Mini Stitchf
Night Life
Nonchalant CR
B continued
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Autobahn
Biotaf
Charm
Circa
Cricket
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
46. 46. 46. 46. 46. 46. 46. 46. 46. 69. 69. 69. 69. 69.
C continued
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kora CR
Legend CR
Lore CR
Metro
Moto CR
Panache CR
Quark
Regard CR
Rio
Roundtrip
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrisonf
Hologram
In The Loop
Masquerade
Obi
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
129
F
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Hand Tipped
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressed
Marissaf
Portofino
Primaf
Rivaf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Joe Ricchio
Order Code
Example: 48A-BN-K224/1
48A Joe arm chair
BN Natural Beech
K224/1 Wide Angle, Castor
Specify:
1. Pattern number
2. Finish
3. Cal 133 fire code option
4. Textile selection
Joe Ricchio
Joe Chair
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
48A Joe arm chair 19� 26� 24� 22� 32� 0.8 14.5 16 lbs. other
stains
19� 26� 24� 22� 32� 0.8 14.5 16 lbs. maple,
ebonized
48R Seat basket replacement for 48A 0.8 13
Ordering Information
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. If no complementary
standard finish is available, please refer
to custom finish policy below.
130
Custom finishes:
Complementary finishes to any
KnollStudio or Knoll Office wood finish
are available at no upcharge. To
complement non-Knoll wood veneer or
lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Cal 133 Fire Code:
The Joe chair complies with California
Technical Bulletin 133 in selected
upholstery. Specify -C at the end of the
pattern number and suffix -133 at the
end of the textile selection. See page 18.
Maintenance:
See pages 27-28.
Note:
The Joe Chair is Greenguard certified.
Construction
Frame:
Select maple hardwood in clear or beech
hardwood in stained finish.
Upholstered seat:
Elastic seat belt suspension, high
resilient foam. Seat basket is 1.25� thick.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
48A-( ) $938. $960. $980. $1,003. $1,022. $1,034. $1,056. $1,101. $1,133. $1,239. $1,318. $1,479. $1,511. $1,549.
48A-(KC, BE) 1,081. 1,102. 1,122. 1,145. 1,164. 1,176. 1,199. 1,244. 1,275. 1,381. 1,460. 1,621. 1,653. 1,691.
48R-( ) 190. 213. 234. 258. 276. 289. 315. 356. 392. 505. 586. 754. 788. 828.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duckf
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Bifold CRf
Chromaf
Classic Boucle
Close Knit
Digitf
Digital Tape
Dovetailf
Fairway
Fast Forward
Field Dayf
B continued
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyricf
Mini Stitchf
Night Life
Nonchalant CR
Odeon
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahnf
Biotaf
Charmf
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoopf
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CRf
C continued
Panache CR
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sequin CR
Sahara
Sandpiper
Smart
Star Struckf
Stepping Stones
Spectator
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrison
Hologramf
In The Loop
Masquerade
Obi
Plain Linen
Satellitef
Satin Chiself
Zoom
131
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Iconf
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvetf
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
España f
Hand Tippedf
Maremmaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofinof
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Joseph and Linda Ricchio, 1990
Award(s):
Roscoe, 1991
Order Code
Example: 37A-T-BN-K1320/4
37A Arm chair
T Thick seat
BN Natural Beech
K1320/4 Cornaro, Tabasco
Specify:
1. Pattern number
2. Thick seat option (Ricchio chair only)
3. Finish selection
4. Cal 133 Fire Code option
5. Textile selection
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Joe and Linda Ricchio
JR� and Ricchio Chair with Upholstered Seat
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
37A Arm chair 18� 25 1 /4� 21 3 /4� 23 1 /2� 32 1 /4� 0.7 13 17 lbs. maple,
ebonized
18� 25 1 /4� 21 3 /4� 23 1 /2� 32 1 /4� 0.7 13 17 lbs. other
finishes
37C Armless chair 18� 21 3 /4� 23 1 /2� 32 1 /4� 0.7 13 15 lbs. maple,
ebonized
18� 21 3 /4� 23 1 /2� 32 1 /4� 0.7 13 15 lbs. other
finishes
T Thick seat option (add -T to end of pattern
number)
37R-T Thick seat basket replacement for
37A and 37C
37R Seat basket replacement for 37A and
37C
0.7 13
0.7 13
44A JR Arm chair, non-stacking 19� 25 3 /4� 23 1 /2� 21 5 /8� 32 1 /8� 0.7 13 14 lbs. maple,
ebonized
19� 25 3 /4� 23 1 /2� 21 5 /8� 32 1 /8� 0.7 13 14 lbs. other
finishes
44R Seat basket replacement for 44A and
44A-U
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. If no complementary
standard finish is available, please refer
to custom finish policy below.
Custom finishes:
Complementary finishes to any
KnollStudio or Knoll Office wood finish
are available at no upcharge. To
complement non-Knoll wood veneer or
lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
132
Cal 133 Fire Codef:
JR and Ricchio Chairs with upholstered
seat comply with California Technical
Bulletin 133 in selected upholstery. For
upholstered chairs, specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.
Maintenance:
See pages 27-28.
Note:
The JR and Ricchio Chair are
Greenguard certified.
JR Chair (44A) does not stack.
0.8 14.5
Construction
Frame:
Select clear maple hardwood in clear or
beech hardwood in stained finish. Dowel
and mortise and tenon construction.
Upholstered seat:
Injection-molded copolymer plastic seat
pan screws into corner blocks of chair
frame. Standard seat basket is 1� thick.
Thick seat basket option is 2� (Ricchio
chair only). Note upcharge above.
Upholstered Seat:
High density, polyurethane foam used in
all upholstered areas. Elastic seat belt
suspension.
Seat Basket Replacement:
Upholstered seat sits on chair frame.
Screws lock basket in place for easy
installation or removal. For seat basket
replacements for JR chairs ordered prior
to February 2007, specify pattern
numbers 37R-S. Pricing for 44R will
apply.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
Glides:
Recessed plastic glides.

pattern no. upcharge
grades
A
COM
B C D E F G H I
COL
U V W X Y
37A-(KC, BE) $1,070. $1,092. $1,110. $1,134. $1,155. $1,166. $1,189. $1,234. $1,265. $1,402. $1,486. $1,648. $1,681. $1,720.
37A-( ) 1,017. 1,039. 1,056. 1,081. 1,101. 1,113. 1,136. 1,181. 1,212. 1,349. 1,433. 1,595. 1,628. 1,667.
37C-(KC, BE) 1,004. 1,028. 1,046. 1,069. 1,089. 1,100. 1,124. 1,169. 1,201. 1,338. 1,420. 1,582. 1,616. 1,655.
37C-( ) 955. 979. 997. 1,020. 1,040. 1,051. 1,075. 1,120. 1,152. 1,288. 1,371. 1,533. 1,566. 1,606.
T 22.
37R-T-( ) 225. 248. 266. 287. 307. 322. 344. 389. 421. 558. 640. 804. 837. 875.
37R-( ) 203. 226. 245. 265. 285. 300. 322. 367. 399. 536. 618. 782. 815. 853.
44A-(KC, BE) 1,059. 1,084. 1,101. 1,124. 1,146. 1,157. 1,183. 1,228. 1,259. 1,376. 1,455. 1,622. 1,656. 1,696.
44A-( ) 1,004. 1,029. 1,047. 1,070. 1,092. 1,102. 1,129. 1,174. 1,205. 1,322. 1,400. 1,568. 1,602. 1,642.
44R-( ) 190. 213. 234. 258. 276. 289. 315. 356. 392. 505. 586. 754. 788. 828.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duckf
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Bifold CRf
Chromaf
Classic Boucle
Close Knit
Digitf
B continued
Digital Tape
Dovetailf
Fairway
Fast Forward
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyricf
Mini Stitchf
Night Life
Nonchalant CR
Odeon
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahnf
Biotaf
Charmf
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoopf
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CRf
Panache CR
C continued
Parasol
Posh
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Sequin CR
Smart
Spectator
Star Struckf
Stepping Stones
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrison
Hologramf
In The Loop
Masquerade
Obi
Plain Linen
Satellitef
Satin Chiself
Zoom
133
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Iconf
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvetf
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
España f
Hand Tippedf
Maremmaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofinof
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Joseph and Linda Ricchio, 1994
Order Code
Example: 37A-U-B319-K1084/2
37A Ricchio arm chair,
upholstered seat and back
U Upholstered seat and back
B319 Medium Cherry
K1084/2 Harrison, Campbell
Specify:
1. Pattern number
2. Finish selection
3. Cal 133 Fire Code option
4. Textile selection
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Reff Light Walnut (B411)
Warm Brown Walnut (J)
Joe and Linda Ricchio
Fully Upholstered Ricchio and JR� Chairs
description seat h arm h w d h
37A-UP Ricchio arm chair, uphol. seat, back
and side panels
37A-U Ricchio arm chair, uphol. seat and
back
37C-U Ricchio armless chair, uphol. seat
and back
textile
fabric
yds.
req.
leather
sq. ft. weight finish
18 1 /2� 26� 21 5 /8� 23 3 /4� 32 1 /4� 1.5 29 24 lbs. maple,
ebonized
18 1 /2� 26� 21 5 /8� 23 3 /4� 32 1 /4� 1.5 29 24 lbs. other
finishes
18 1 /2� 26� 21 5 /8� 23 3 /4� 32 1 /4� 1 19 21 lbs. maple,
ebonized
18 1 /2� 26� 21 5 /8� 23 3 /4� 32 1 /4� 1 19 21 lbs. other
finishes
18 1 /2� 21 5 /8� 23 3 /4� 32 1 /4� 1 19 19 lbs. maple,
ebonized
18 1 /2� 21 5 /8� 23 3 /4� 32 1 /4� 1 19 19 lbs. other
finishes
44A-U JR Arm chair, uphol. seat and back 19� 26� 24� 22� 32� 1 18 15 lbs. maple,
ebonized
19� 26� 24� 22� 32� 1 18 15 lbs. other
finishes
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. If no complementary
standard finish is available, please refer
to custom finish policy below.
Custom finishes:
Complementary finishes to any
KnollStudio or Knoll Office wood finish
are available at no upcharge. To
complement non-Knoll wood veneer or
lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
134
Cal 133 Fire Code f:
Fully upholstered Ricchio Chairs comply
with California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number and suffix -133 at
end of textile selection. Upcharge
applies, see page 18.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.
Maintenance:
See pages 27-28
Note:
The Fully Upholstered Ricchio and JR
Chairs are Greenguard certified.
Construction
Frame:
Select clear maple hardwood in clear or
beech hardwood in stained finish.
Fully upholstered chairs:
Plywood core back panel bolted to frame
for added strength. Optional arm panels
have plywood core bolted to frame.
Injection-molded plastic seat pan. High
density, polyurethane foam used in all
upholstered areas. JR fully upholstered
chair does not stack.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
Glides:
Recessed plastic glides.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
37A-UP-(KC, BE) $1,764. $1,810. $1,856. $1,903. $1,945. $1,972. $2,021. $2,115. $2,184. $2,526. $2,707. $3,070. $3,144. $3,232.
37A-UP-( ) 1,676. 1,722. 1,768. 1,815. 1,857. 1,884. 1,933. 2,027. 2,096. 2,438. 2,619. 2,982. 3,057. 3,144.
37A-U-(KC, BE) 1,429. 1,460. 1,490. 1,522. 1,550. 1,569. 1,602. 1,662. 1,709. 2,011. 2,132. 2,367. 2,418. 2,475.
37A-U-( ) 1,357. 1,389. 1,419. 1,450. 1,479. 1,497. 1,531. 1,590. 1,638. 1,940. 2,061. 2,296. 2,347. 2,404.
37C-U-(KC, BE) 1,364. 1,395. 1,422. 1,456. 1,484. 1,503. 1,536. 1,598. 1,642. 1,946. 2,064. 2,301. 2,352. 2,409.
37C-U-( ) 1,296. 1,327. 1,354. 1,388. 1,416. 1,435. 1,468. 1,530. 1,574. 1,878. 1,996. 2,233. 2,284. 2,341.
44AU-(KC, BE) 1,388. 1,412. 1,435. 1,461. 1,482. 1,496. 1,523. 1,572. 1,607. 1,721. 1,810. 1,988. 2,023. 2,068.
44AU-( ) 1,251. 1,275. 1,298. 1,324. 1,345. 1,360. 1,386. 1,435. 1,470. 1,584. 1,673. 1,851. 1,886. 1,931.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duckf
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Bifold CRf
Chromaf
Classic Boucle
Close Knit
Digitf
Digital Tape
B continued
Fast Forward
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyricf
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahnf
Biotaf
Charm
Circa
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CRf
Panache CR
Quark
C continued
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
Smart
Star Struck
Stepping Stones
Spectator
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrison
Hologramf
In The Loop
Masquerade
Obi
Plain Linen
Satellitef
Satin Chisel
Zoom
135
E
Cross Stitch
Luberon
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvetf
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Españaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
KnollStudio
W continued
Fortef
Sabrinaf
X
Ducale Veloursf
Y
Caprif
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
f Approved for Cal 133 upholstery.
Check with KnollTextiles or Spinneybeck
Representative for changes or additions.

Designer(s):
Joseph and Linda Ricchio, 1994
Order Code
Example: 37CM-BN-K715/3
37CM Ricchio barstool, medium
BN Natural Beech
K715/3 Abacus, Sand Dollar
Specify:
1. Pattern number
2. Finish selection
3. Textile selection
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Beech (suffix B311)
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Deep Red Mahogany (suffix B328)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Joe and Linda Ricchio
Ricchio Barstool
description seat h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight finish
37CH High barstool 30� 18 1 /2� 21� 40� 0.7 10 16 lbs. maple,
ebonized
30� 18 1 /2� 21� 40� 0.7 10 16 lbs. other
finishes
37CM Medium barstool 24� 18 1 /2� 21� 34� 0.7 10 15 lbs. maple,
ebonized
24� 18 1 /2� 21� 34� 0.7 10 15 lbs. other
finishes
37CR Replacement seat basket for barstool 0.5 10
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. If no complementary
standard finish is available, please refer
to custom finish policy below.
Custom finishes:
Complementary finishes to any
KnollStudio or Knoll Office wood finish
are available at no upcharge. To
complement non-Knoll wood veneer or
lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
136
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Cal 133 Fire Codef:
Ricchio Barstools comply with California
Technical Bulletin 133 in selected
upholstery. Specify suffix -C at end of
pattern number and suffix -133 at end of
textile selection. Upcharge applies, see
page 18.
Maintenance:
See pages 27-28.
Note:
The Ricchio Barstool is Greenguard
certified.
Construction
Frame:
Select clear maple hardwood in clear or
beech hardwood in stained finish.
Barstool:
Plywood seat basket with foam on elastic
suspension. Barstool has metal foot rest.
For maple finish, footrest is in satin
anodized aluminum. For beech stains,
footrest is in black aluminum.
Finish:
Catalyzed lacquer protective coating.
Hand-applied final wax coating.
Footrest:
Clear maple stools have a satin anodized
footrest. Beech substrate stools have a
black footrest.
Glides:
Recessed plastic glides.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
37CH-(KC, BE) $1,170. $1,184. $1,200. $1,215. $1,232. $1,239. $1,256. $1,287. $1,311. $1,415. $1,479. $1,608. $1,634. $1,666.
37CH-( ) 959. 973. 989. 1,004. 1,021. 1,028. 1,045. 1,076. 1,100. 1,204. 1,268. 1,397. 1,423. 1,455.
37CM-(KC, BE) 1,143. 1,159. 1,172. 1,190. 1,203. 1,212. 1,230. 1,262. 1,287. 1,388. 1,452. 1,581. 1,607. 1,638.
37CM-( ) 944. 959. 973. 991. 1,003. 1,013. 1,030. 1,063. 1,088. 1,188. 1,252. 1,381. 1,408. 1,438.
37CR 213. 229. 243. 258. 275. 284. 302. 334. 356. 458. 521. 650. 678. 710.
Approved KnollTextiles Grade/Fabrics
A
Alignmentf
Analogy
Bocce
Cat’s Cradle
Common Groundf
Cotton Duckf
Dristi
Foil Rap
Heavy Metal
Mariner
Metaphor
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Backdrop
Bank Shot
Belize
Betwixtf
Bifold CRf
Chromaf
Classic Boucle
Close Knit
Digitf
Digital Tape
Dovetailf
B continued
Fairway
Fast Forward
Field Dayf
Forza
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyricf
Mini Stitchf
Night Life
Nonchalant CR
Odeon
Paradigm
Pogof
Pop
Ricochetf
Sparkf
Spinoff Nuancef
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Autobahnf
Biotaf
Charmf
Circa
Cricket
Decade
Earthworkf
Echo
Empire Stripe
English Accent
Enmeshf
Entourage
Fable CR
Fibra
Fox Trot CR
Galaf
Highline CR
Hula Hoopf
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CRf
C continued
Parasol
Panache CR
Posh
Quark
Regard CR
Rio
Roundtrip
Sequin CR
Sahara
Smart
Spectator
Star Struckf
Stepping Stones
Swing
Transitionf
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrison
Hologramf
In The Loop
Masquerade
Obi
Plain Linen
Satellitef
Satin Chiself
Zoom
137
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Iconf
Rivington
Topography
Tweed Frieze
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvetf
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
Mepal
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
España f
Hand Tippedf
Maremmaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Lucentef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Veloursf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Portofino
Primaf
Rivaf
Saddlef
Salonf
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Jens Risom, 1943
Order Code
Example: 666C-WB-LWT-MZ
666C-WB Risom side chair with
webbed seat and back
LWT Light Walnut
MZ Maize cotton webbing
Note:
The Risom side chairs are part of a
collection. Please refer to the Risom
lounge chairs on page 142 and tables on
page 234.
Specify:
1. Pattern number
2. Frame finish
3. Webbing color selection
Jens Risom
Side Chairs and Stool
description seat h w d h
666C-WB Side chair with webbed seat and
back
666C-WB-KIT Re-upholstery kit for side
chair with webbed back
reuphol.
kit ydg. weight
17 3 /4� 17 1 /4� 18� 30 5 /8� see below
666C Side chair with webbed seat 17 3 /4� 17 1 /4� 18� 30 5 /8� see below
666C-KIT Re-upholstery kit for side chair
with wood back
667Y Sitting stool 17 1 /8� 16 1 /2� 15 1 /8� 17 1 /8� see below
667Y-KIT Re-upholstery kit for stool 7.0
Ordering Information
Frame finishes:
Clear Maple (suffix KC)
Ebonized Maple (suffix KE)
Light Walnut (suffix LWT)
Cotton webbing colors:
Aubergine (suffix AU)
Black (suffix BL)
Dark Grey (suffix DG)
Flax (suffix FL)
Forest Green (suffix FG)
Khaki (suffix KH)
Maize (suffix MZ)
Navy (suffix NA)
Red (suffix RD)
Steel Blue (suffix SB)
138
Cotton/nylon webbing colors:
Blueberry (suffix BU)
Eucalyptus (suffix EU)
Licorice (suffix LC)
Nutmeg (suffix NM)
Squash (suffix SH)
Tomato (suffix TO)
Re-upholstery kit:
Webbing straps in one length to
re-upholster existing chairs. Must be
reupholstered by a professional
upholsterer.
Note:
The Risom side chairs are Greenguard
certified.
Maintenance:
See pages 27-28.
14.0
9.0
Construction
Frame:
Select maple or walnut hardwood with
clear finish. Ebonized finish is stained
maple hardwood. Mortise and tenon
construction.
Finish:
Catalyzed lacquer protective coating.
Upholstery:
Cotton webbing is 100% natural cotton.
Nylon webbing straps are 60% nylon,
40% cotton with water repellant finish.

pattern no. maple, ebonized walnut webbing kit
666C-WB-( )-( ) $896. $1,118.
666C-WB-KIT-( ) 100.
666C-( )-( ) 826. 1,072.
666C-KIT-( ) 80.
667Y-( )-( ) 533. 559.
667Y-KIT-( ) 69.
Weight:
Side chair with webbed seat and back in
Maple and/or Ebonized finishes weigh 11
lbs, Walnut finish weigh 10 lbs. Side
chair with webbed seat in Maple and/or
Ebonized finishes weigh 10 lbs., Walnut
finish weigh 9lbs. Sitting stool in Maple
and/or Ebonized finishes weigh 7 lbs.,
Walnut finish weigh 6 lbs.
139
KnollStudio

Designer(s):
Jens Risom, 1943
Order Code
Example: 666CS-WB-HB-OR
666CS-WB Child’s Risom side chair
with webbed seat and back
HB Honey Beech
OR Orange nylon webbing
Note:
The Child’s Risom side chairs are part of
a collection. Please refer to the Child’s
Risom Amoeba table on page 236.
Specify:
1. Pattern number
2. Frame finish
3. Webbing color selection
Jens Risom
Child’s Side Chairs and Stool
description seat h w d h
666CS Child’s Risom chair, webbed seat
only
666CS-KIT Re-upholstery kit for Child’s
side chair with webbed seat
666CS-WB Child’s Risom chair with
webbed seat and back
666CS-WB-KIT Re-upholstery kit for
Child’s side chair with webbed seat and back
reuphol.
kit ydg. weight
13 1 /4� 13 1 /8� 15 5 /8� 23� 6 lbs.
13 1 /4� 13 1 /8� 15 5 /8� 23� 6 lbs.
667YS Child’s sitting stool 13 1 /2� 12 3 /8� 11 1 /2� 13 1 /2� 6 lbs.
667YS-KIT Re-upholstery kit for Child’s
Sitting stool
Ordering Information
Frame finishes:
Honey Beech (suffix HB)
Child’s nylon webbing colors:
Blue (suffix BC)
Green (suffix GC)
Orange (suffix OC)
Red (suffix RC)
Re-upholstery kit:
Webbing straps in one length to
re-upholster existing chairs. Must be
reupholstered by a professional
upholsterer.
Maintenance:
See pages 27-28.
140
Construction
Frame:
Select European Beech hardwood with a
toned natural finish. Mortise and tenon
construction.
Finish:
Toned catalyzed lacquer finish
Child’s Risom Chairs:
Child’s Risom Chairs are 75% scale of
standard risom chair. Child’s size chairs
are only available in Honey Beech (HB)
finish and approved nylon webbing.
Upholstery:
Nylon webbing straps are 60% nylon,
40% cotton with water repellant finish.
7.0
9.0
5.5
Note:
The Child’s Risom chair and stool are
compliant to the Consumer Product
Safety Improvement Act of 2008 for
Children’s Products, 16 C.F.R. 1303,
CPSIA Title 1 Section 101 for Total Lead
in Substrates and Surface Coatings.

pattern no. honey beech webbing kit
666CS-HB-( ) $303.
666CS-KIT-( ) 58.
666CS-WB-HB-( ) 337.
666CS-WB-KIT-( ) 83.
667YS-HB-( ) 219.
KnollStudio
667YS-KIT-( ) 50.
141

Designer(s):
Jens Risom, 1943
Order Code
Example: 654LC-KC-RD
654LC Risom lounge chair, armless
KC Clear Maple
RD Red cotton webbing
Note:
The Risom lounge chairs are part of a
collection. Please refer to the Risom side
chairs on page 138 and tables on page
234.
Specify:
1. Pattern number
2. Frame finish
3. Webbing color selection
Jens Risom
Lounge Chairs
description seat h arm h w d h
reuphol.
kit ydg. weight
654LA Arm lounge chair 15 1 /2� 20� 23 1 /2� 25� 29� see below
654LC Armless lounge chair 16 1 /4� 20� 28� 29 3 /4� see below
654L-KIT Re-upholstery kit for arm and
armless lounge chair
Ordering Information
Frame finishes:
Clear maple (suffix KC)
Ebonized maple (suffix KE)
Light walnut (suffix LWT)
Cotton webbing colors:
Aubergine (suffix AU)
Black (suffix BL)
Dark grey (suffix DG)
Flax (suffix FL)
Forest green (suffix FG)
Khaki (suffix KH)
Maize (suffix MZ)
Navy (suffix NA)
Red (suffix RD)
Steel blue (suffix SB)
142
Cotton/nylon webbing colors:
Blueberry (suffix BU)
Eucalyptus (suffix EU)
Licorice (suffix LC)
Nutmeg (suffix NM)
Squash (suffix SH)
Tomato (suffix TO)
Re-upholstery kit:
Webbing straps in one length to
re-upholster existing chairs. Must be
reupholstered by a professional
upholsterer.
Note:
The Risom Lounge chairs are
Greenguard certified.
Maintenance:
See pages 27-28.
25
Construction
Frame:
Select maple or walnut hardwood with
clear finish. Ebonized finish is stained
maple hardwood. Mortise and tenon
construction. Seat basket of arm lounge
chair attaches to arm frame with invisible
screws.
Finish:
Lacquer finish.
Upholstery:
Cotton webbing is 100% natural cotton.
Nylon webbing straps are 60% nylon,
40% cotton with water repellant finish.

pattern no. maple, ebonized walnut webbing kit
654LA-( )-( ) $1,627. $1,709.
654LC-( )-( ) 1,238. 1,300.
654L-KIT-( ) 134.
Weight:
Arm lounge chair in Maple and/or
Ebonized finishes weigh 20 lbs, Walnut
finish weigh 17 lbs. Armless lounge
chair in Maple and/or Ebonized
finishes weigh 14 lbs., Walnut
finish weigh 12 lbs.
143
KnollStudio

Designer(s):
Eero Saarinen, 1957
Award(s):
The Museum of Modern Art, New
York, USA, 1969; Federal Award
for Industrial Design, W.
Germany, 1969; Design Center
Stuttgart Award, W. Germany,
1962
Order Code
Example: 150AX-2-U-K451/4
150AX Tulip arm chair, fixed
position
2 White
U Upholstered inner shell and
seat cushion
K451/4 Una, Ebony
Note:
The Saarinen chairs are part of a
collection. Please refer to Saarinen
lounge seating, executive chairs and
tables on pages 146 and 238.
Specify:
1. Pattern number
2. Swivel or fixed position
3. Finish selection
4. Upholstery option (except stool)
5. Textile selection
Eero Saarinen
Tulip Chairs
description upholstery seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
150A Tulip arm chair inner shell 18� 25 3 /8� 26� 23 1 /4� 32� 2.3 n/a 24 lbs.
seat cushion 18� 25 3 /8� 26� 23 1 /4� 32� 0.8 14 18 lbs.
150K Upholstered cushion replacement, arm
chair
inner shell 18� 25 3 /8� 26� 23 1 /4� 32� 2.3 n/a 23 lbs.
seat cushion 18� 25 3 /8� 26� 23 1 /4� 32� 0.8 14 18 lbs.
seat cushion 0.8 14
151C Tulip armless chair inner shell 18 1 /2� 20� 21 1 /4� 32� 1.7 n/a 20 lbs.
inner shell 18 1 /2� 20� 21 1 /4� 32� 1.7 n/a 19 lbs.
seat cushion 18 1 /2� 20� 21 1 /4� 32� 0.8 14 17 lbs.
151K Upholstered cushion replacement,
armless chair
seat cushion 18 1 /2� 20� 21 1 /4� 32� 0.8 14 16 lbs.
seat cushion 0.8 14
153Y Stool 16 1 /2� 15 1 /2� 16 1 /2� 0.8 14 10 lbs.
Ordering Information
Swivel or fixed position:
Swivel action (suffix S)
Fixed position (suffix X)
Base and shell finishes:
Black (suffix 1)
Platinum (suffix PL) (not on fully
upholstered chairs)
White (suffix 2)
Upholstery options:
Upholstered seat cushion only (suffix K)
Upholstered inner shell and seat cushion
(suffix U)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
144
Maintenance:
See pages 27-28.
Note:
The signature of Eero Saarinen and the
KnollStudio logo are located on the
underside of the base.
The Tulip Chair is Greenguard certified.
Construction
Base:
Cast aluminum. Rilsan coated finish for
black and white chairs, platinum
chairs consist of a high-resilient
polyurethane enamel wet coat with a
clear satin finish.
Shell:
Molded fiberglass reinforced plastic
bonded finish.
Upholstery:
Upholstered or unupholstered inner
shell, with removable foam cushion
(zippered cover and Velcro fastening).

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
150AS-(1,2)U $3,808. $3,871. $3,930. $3,997. $4,050. $4,090. $4,157. $4,282. $4,374.
150AS-(1,2,
PL)K
2,270. 2,289. 2,306. 2,325. 2,342. 2,352. 2,373. 2,410. 2,437. 2,515. 2,581. 2,713. 2,740. 2,771.
150AX-(1,2)U 3,557. 3,620. 3,679. 3,746. 3,800. 3,839. 3,906. 4,032. 4,126.
150AX-(1,2,PL)K 2,139. 2,158. 2,176. 2,196. 2,211. 2,222. 2,242. 2,279. 2,306. 2,386. 2,451. 2,582. 2,609. 2,642.
150K 449. 467. 484. 503. 517. 528. 547. 582. 607. 740. 802. 926. 951. 981.
151CS-(1,2)U 3,211. 3,258. 3,302. 3,350. 3,391. 3,420. 3,468. 3,562. 3,630.
151CX-(1,2)U 3,099. 3,146. 3,191. 3,240. 3,280. 3,308. 3,358. 3,452. 3,521.
151CS-
(1,2,PL)K
1,957. 1,976. 1,994. 2,013. 2,029. 2,041. 2,061. 2,097. 2,124. 2,237. 2,303. 2,435. 2,462. 2,494.
151CX-(1,2,PL)K 1,769. 1,788. 1,806. 1,825. 1,841. 1,852. 1,872. 1,908. 1,936. 2,134. 2,199. 2,330. 2,359. 2,389.
151K 449. 467. 484. 503. 517. 528. 547. 582. 607. 740. 802. 926. 951. 981.
153YS-(1, 2, PL) 1,156. 1,174. 1,190. 1,209. 1,224. 1,234. 1,253. 1,288. 1,314. 1,389. 1,449. 1,574. 1,600. 1,630.
Approved KnollTextiles Grades/Fabric
A
Alignment *
Analogy
Bocce *
Cat’s Cradle *
Common Ground *
Dristi *
Mariner *
Metaphor
Monarch
Prep
Presto (n/a on stool)
Stacks *
B
Abacus *
Bank Shot *
Belize *
Betwixt *
Chroma
Classic Boucle *
Close Knit *
Digit
Dovetail *
Fairway *
Field Day *
Grande *
Gusto CR *
B continued
Knoll Felt *
Knoll Hopsack *
Lyric *
Mini Stitch *
Night Life *
Paradigm *
Pogo *
Pop *
Ricochet *
Spark *
Spinoff Nuance *
Spotlight *
Starry Night *
Techno Tweed *
Triple Lace *
Utmost *
Vinyl
Wide Angle *
Zephyr *
C
Atlas *
Autobahn
Biota *
Charm *
Circa *
Cricket
Earthwork *
Echo *
Empire Stripe
Enmesh *
Entourage *
Fable CR *
Fibra *
Fox Trot CR *
Gala *
Highline CR *
Hula Hoop *
Kora CR
Legend CR
Lore CR
Metro
Moto CR *
Panache CR *
Parasol *
Posh
Quark *
Regard CR *
C continued
Rio *
Roundtrip *
Sahara *
Sandpiper
Sequin CR *
Smart *
Spectator *
Star Struck *
Stepping Stones
Swing *
Transition *
Treble CR *
Vibe *
Zari CR *
D
Cavalier *
Compass CR
Eclat Weave *
Harrison *
Hologram
Masquerade
Obi *
Satellite
Satin Chisel
Zoom
145
E
Cross Stitch *
Luberon *
Madison
Mamba *
Plus *
Whip *
F
Calais Cotton
Velvet
Century *
Coco *
Cornaro *
Eclipse *
Groove Line *
Icon *
Rivington *
Topography *
Tweed Frieze *
Una *
G
Brugge *
Garden City *
Gibson *
Hampshire *
Haze *
Lyon
Spencer *
Ultrasuede *
H
Arno *
Bavaria *
Lyonese Velvet *
I
Bryon
Canaan *
Cato *
Galloway *
Gates *
Jaipur *
Knoll Velvet *
North Island *
Sandis *
Stirling *
Walker *
Worth *
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
* Approved for fully upholstered
versions.
KnollStudio
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Eero Saarinen, 1950
Order Code
Example: 71A-3-T5G-R-ES8080
71A Open back arm chair
3 Black top caps
T5G Advanced height
adjustment, swivel/tilt
R Soft wheel casters
ES8080 Espana, Serpentina
Note:
The Saarinen executive chairs are part of
a collection. Please refer to Saarinen side
chairs, lounge chairs and tables on
beginning on pages 144 and 238.
Specify:
1. Pattern number
2. Black top cap option (swivel base
only)
3. Caster type (swivel base only)
4. Cal 133 fire code option
5. Split upholstery option (add S)
6. Textile selection
Eero Saarinen
Executive Arm Chairs
description
71A-T5G-H Executive arm chair with
pneumatic seat height adjustment
Executive arm chair with pneumatic seat
height adjustment, contrast leather welt
option
71A-C Executive arm chair with tubular legs
and glides
Executive arm chair with tubular legs and
glides, contrast leather welt option
71A-W Executive arm chair with wood legs
and glides
Executive arm chair with wood legs and
glides, contrast leather welt option
R Optional soft wheel casters (change -H to
-R)
3 Optional black top caps (add -3 after 71A,
not available for 71A-PC)
Ordering Information
Leg Finishes:
Ebonized Walnut (suffix D)
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Pearwood (suffix P)
Polished Chrome (suffix C)
Reff Dark Cherry (suffix V314)
Caster option:
Hard wheel casters standard. For soft
wheel casters, change -H in pattern
number to -R. No glide option on swivel
models.
Split upholstery option:
The seat and back of the Saarinen
Executive Chair can be specified in split
upholstery. Indicate S before selected
seat upholstery, followed by selected
back upholstery. The price equals the
price of the higher upholstery grade.
COM split fabric requirements:
Back upholstery: 2.25 yards
Seat upholstery: 1.25 yards
COL split leather requirements:
Back upholstery: 40 square feet
Seat upholstery: 23 square feet
seat h,
min
seat h,
max w d h, min h, max
textile
fabric
yds.
req.
leather
sq. ft. weight type
16 1 /2� 21 3 /4� 26� 24 1 /4� 31� 36 1 /4� 2.9 47 34 lbs.
16 1 /2� 21 3 /4� 26� 24 1 /4� 31� 36 1 /4� 2.9 47 34 lbs. uphol.
6.25 welt
18� 26� 25 1 /2� 31 1 /2� 2.9 47 19 lbs.
18� 26� 26� 31 1 /2� 2.9 47 19 lbs. uphol.
6.25 welt
18� 26� 24 1 /2� 31 1 /2� 2.9 47 18 lbs.
18� 26� 24 1 /2� 31 1 /2� 2.9 47 18 lbs. uphol.
146
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Cal 133 Fire Codef:
The Saarinen Executive chair complies
with California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number. Upcharge
applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The Saarinen Executive Arm Chair is
Greenguard certified.
6.25 welt
Construction
Frame:
Molded reinforced polyurethane shell.
Contoured plywood seat form.
Upholstery:
Urethane foam cushion. Welt detail along
arm, back and top of seat is available as
a self welt (same material) or as a
contrasting leather welt. Please specify
pattern number with LT suffix, for
contrasting welt, and add appropriate
leather upcharge for total list price of the
piece. Leather welt option is available
on both textile and leather upholstery.
Swivel base:
Five-star steel base in protective black
epoxy finish. Stainless steel or optional
black epoxy top caps.
Steel leg base:
Four legs in seamless tubular steel with
polished chrome finish.

pattern no. upcharge
grades
A
COM
B C D E F G H I
COL
U V W X Y
71A-T5G-( )-( ) $2,517. $2,584. $2,648. $2,719. $2,777. $2,819. $2,890. $3,025. $3,125. $3,931. $4,150. $4,592. $4,685. $4,791.
71A-T5G-( )-LT-
( )-( )
2,517. 2,584. 2,648. 2,719. 2,777. 2,819. 2,890. 3,025. 3,125. 3,931. 4,150. 4,592. 4,685. 4,791.
upchg, welt 192. 218. 272. 283. 296.
71A-C-( ) 1,858. 1,925. 1,990. 2,061. 2,118. 2,160. 2,231. 2,365. 2,465. 3,268. 3,486. 3,928. 4,020. 4,128.
71A-C-LT-( )-( ) 1,858. 1,925. 1,990. 2,061. 2,118. 2,160. 2,231. 2,365. 2,465. 3,268. 3,486. 3,928. 4,020. 4,128.
upchg, welt 192. 218. 272. 283. 296.
71A-W-( )-( ) 2,175. 2,244. 2,310. 2,384. 2,443. 2,486. 2,560. 2,698. 2,802. 3,605. 3,831. 4,288. 4,383. 4,494.
71A-W-( )-LT-( )-
()
2,175. 2,244. 2,310. 2,384. 2,443. 2,486. 2,560. 2,698. 2,802. 3,605. 3,831. 4,288. 4,383. 4,494.
upchg, welt 192. 218. 272. 283. 296.
R n/c
3 76.
Wood leg base:
Solid steam bent oak with a clear or
stained finish. Finish is complementary
match to Saarinen, Florence Knoll and
Platner low tables.
Casters:
2� twin wheel hard casters for use on
carpeted floors. Wheel and housing
components in black textured plastic.
Optional soft casters for use on wood and
other resilient flooring (black with grey
housing).
Glides:
Molded nylon disk in stamped steel
shroud.
Approved KnollTextiles Grades/Fabric
A
Common Groundf
Dristi
Mariner
Presto
Stacks
B
Abacus
Bank Shot
Classic Boucle
Digit
Field Day
Grande
Knoll Felt
Knoll Hopsack
Lyric
Night Life
Pop
Ricochet
Spinoff Nuance
Spotlight
Starry Night
B continued
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Echo
English Accent
Entourage
Hula Hoop
Metro
Quark
Sequin CR
Smart
Stepping Stones
Swing
Transition
D
Cavalierf
Harrison
Hologram
147
D continued
Masquerade
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Luberon
Mamba
Plus
F
Coco
Cornaro
Eclipse
Groove Line
Rivington
Tweed Frieze
Una
G
Brugge
Garden City
Hampshire
Haze
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Cato
Galloway
Knoll Velvet
North Island
Stirling
Walker
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velours
Y
Capri
Copenhagen
Cordovan
Distressed
Marissa
Prima
Riva
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Eero Saarinen, 1946
Order Code
Example: 72C-C-S-CD70-AL5008
72C Open back chair, armless
C Polished chrome leg
S Split upholstery option
CD70 seat: Cordovan, Rembrandt
Brown
AL5008 back: Alaska, Caribou
Note:
The Saarinen executive chairs are part of
a collection. Please refer to Saarinen side
chairs, lounge chairs and tables on
beginning on pages 144 and 238.
Specify:
1. Pattern number
2. Leg base option
3. Cal 133 fire code option
4. Split upholstery option (add S)
5. Textile selection, seat
6. Textile selection, back
Leg Finishes:
Ebonized Walnut (suffix D)
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Pearwood (suffix P)
Polished Chrome (suffix C)
Reff Dark Cherry (suffix V314)
Plastic Back Finishes:
Black (suffix 1)
White (suffix 2)
Eero Saarinen
Executive Armless Chairs
description
72C-T5G-H Executive armless chair with
pneumatic seat height adjustment
72C-C Executive armless chair with tubular
legs and glides
72C-W Executive armless chair with wood
legs and glides
72C-C Executive armless chair with plastic
back, tubular legs and glides
3 Optional black top caps (add -3 after 72C,
not available for 72C-PC)
R Optional soft wheel casters (change -H to
-R)
Ordering Information
Caster option:
Hard wheel casters standard. For soft
wheel casters, change -H to -R. No glide
option on control models.
Split upholstery option:
The seat and back of the Saarinen
Executive Chair can be specified in split
upholstery. Indicate S before selected
seat upholstery, followed by selected
back upholstery. The price equals the
price of the higher upholstery grade.
COM split fabric requirements:
Back upholstery: 1.5 yards
Seat upholstery: .75 yards
COL split leather requirements:
Back upholstery: 27 square feet
Seat upholstery: 13.5 square feet
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.Customer’s Own Material
is available pending approval. For
approval requirements, processing
instructions and ordering information
please see page 20.
seat h,
min
seat h,
max w d h, min h, max
textile
fabric
yds.
req.
leather
sq. ft. weight
14 1 /2� 19 3 /4� 22 1 /2� 24� 31� 36 1 /4� 2.0 35 29 lbs.
18 3 /4� 22 1 /2� 20 1 /2� 31 3 /4� 2.0 35 14 lbs.
18 3 /4� 22 1 /2� 20 1 /2� 31 1 /2� 2.0 35 13 lbs.
18 3 /4� 22� 20.5� 31 3 /4� 1.3 12 16 lbs.
148
Cal 133 Fire Codef:
The Saarinen Executive chair complies
with California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number. Upcharge
applies, see page 18.
Maintenance:
See pages 27-28.
Note:
The Saarinen Executive Armless Chair is
Greenguard certified
Construction:
Frame:
Molded reinforced polyurethane shell.
Contoured plywood seat form.
Plastic Back:
Polycarbonate with a powder coat paint
in black or white. Note that the seat of
the plastic back version is slightly wider
than the fully upholstered version.
Upholstery:
Urethane foam cushion.
Swivel base:
Five-star steel base in protective black
epoxy finish. Stainless steel or optional
black epoxy top caps.
Steel Leg base:
Four legs in seamless tubular steel with
polished chrome finish.
Wood leg base:
Solid steam bent oak with a clear or
stained finish. Finish is complementary
match to Saarinen, Florence Knoll and
Platner low tables
Casters:
2� twin wheel hard casters for use on
carpeted floors. Wheel and housing
components in black textured plastic.
Optional soft casters for use on wood and
other resilient flooring (black with grey
housing).
Glides:
Molded nylon disk in stamped steel
shroud.

pattern no. upcharge
grades
A
COM
B C D E F G H I
COL
U V W X Y
72C-T5G-H-( ) $1,804. $1,850. $1,895. $1,943. $1,982. $2,012. $2,061. $2,154. $2,222. $2,654. $2,816. $3,145. $3,214. $3,294.
72C-C-( ) 1,245. 1,292. 1,336. 1,385. 1,424. 1,454. 1,502. 1,595. 1,664. 2,070. 2,232. 2,561. 2,629. 2,710.
72C-W-( )-( ) 1,588. 1,636. 1,682. 1,733. 1,773. 1,804. 1,854. 1,950. 2,021. 2,434. 2,601. 2,941. 3,012. 3,094.
72C-C-(1, 2)-( ) 866. 897. 925. 957. 982. 1,001. 1,034. 1,093. 1,139. 1,073. 1,129. 1,241. 1,265. 1,293.
3 76.
R n/c
Approved KnollTextiles Grades/Fabric
A
Bocce
Cat’s Cradle
Common Groundf
Dristi
Mariner
Prep
Prestof
Stacks
B
Abacusf
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Digit
Fairway
Field Day
Forza
Grande
B continued
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Paradigm
Pop
Ricochet
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Wide Anglef
Zephyr
C
Atlas
Biota
Charmf
Circa
Cricket
Earthwork
Echo
C continued
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Galaf
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Lore CR
Metro
Panache CR
Quark
Regard CR
Rio
Rountrip
Sandpiper
Sequin CR
Smart
Spectator
Star Struckf
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalierf
Compass CR
Eclat Weave
Harrison
Hologram
Masquerade
Obi
Satellite
Satin Chisel
Zoom
E
Cross Stitch
Luberon
Madison
Mamba
Plus
Whip
F
Coco
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Tweed Frieze
Una
149
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Canaan
Cato
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Forte
Sabrina
KnollStudio
X
Ducale
Ducale Velour
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
f Approved for Cal 133 upholstery;
approval does not apply to chairs with
plastic backs.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Eero Saarinen, 1946
Order Code
Example: 70LM-BL-K530/4
70LM Medium womb chair
BL Black base
K530/4 Lyonese Velvet, Cognac
Note:
The Womb chair and ottoman are part of
a collection. Please refer to Saarinen side
and executive chairs and tables on pages
144 and 238.
Specify:
1. Pattern number/size
2. Base finish selection
3. Cal 133 option
4. Split upholstery option (add S)
5. Textile selection
Eero Saarinen
Womb Chair and Ottoman
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
70L Womb chair 16� 20 1 /2� 40� 34� 35 1 /2� 7.2 117 36 lbs.
74Y Ottoman 25 1 /2� 20� 16� 2.1 34 13 lbs.
70LM Medium Womb chair 15� 18� 35� 31� 31 1 /4� 5 96 31 lbs.
74YM Medium ottoman 21� 17 1 /2� 14 1 /4� 1.7 28 11 lbs.
70LS Child’s Womb chair 14 1 /2� 17� 31� 28� 27 1 /4� 5 96 27 lbs.
Ordering Information
Base finishes:
Black (suffix BL)
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
KnollStudio 20-day Program:
The standard Womb chair and ottoman
are available in a chrome finish on the
20-day program upholstered with
in-stock KnollTextile. For more
information, please consult pages 29-32.
150
Split upholstery option:
The surround and cushions of the Womb
chair and ottoman may be specified
with split upholstery. Indicate S before
selected surround upholstery, followed
by selected cushion upholstery. Price
equals the higher upholstery grade.
COM split fabric requirements:
75% Womb chair body: 3.5 yards
75% Womb chair seat/back: 1.25 yards
85% Womb chair body: 3.75 yards
85% Womb chair seat/back: 1.25 yards
85% Ottoman body: 1 yard
85% Ottoman cushion: .75 yards
100% Womb chair body: 5.50 yards
100% Womb chair seat/back: 2 yards
100% Ottoman body: 1 yard
100% Ottoman cushion: 1.25 yards
COL split leather requirements:
75% Womb chair body: 90 square ft
75% Womb chair seat/back: 23 square ft
85% Womb chair body: 96 square ft
85% Womb chair seat/back: 25 square ft
85% Ottoman body: 48 square ft
85% Ottoman cushion: 25 square ft
100% Womb chair body: 110 square ft
100% Womb chair seat/back: 40 square
ft
100% Ottoman body: 27.5 square ft
100% Ottoman cushion: 27.5 square ft
Maintenance:
See pages 27-28.
Cal 133 Fire Codef:
The Saarinen Womb chair complies with
California Technical Bulletin 133 in
selected upholstery. Specify suffix -C at
end of pattern number. Upcharge
applies, see page 18.
Note:
The Saarinen Womb chair and ottoman
are Greenguard certified.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
70L-(BL,C)-( ) $4,506. $4,732. $4,961. $5,130. $5,274. $5,407. $5,553. $5,918. $6,591. $7,514. $8,275. $10,228. $10,566. $10,775.
74Y-(BL,C)-( ) 1,329. 1,386. 1,446. 1,489. 1,528. 1,563. 1,601. 1,694. 1,866. 2,030. 2,227. 2,734. 2,822. 2,875.
70LM-(BL,C)-( ) 4,251. 4,464. 4,680. 4,839. 4,975. 5,101. 5,239. 5,582. 6,218. 7,088. 7,807. 9,650. 9,968. 10,165.
74YM-(BL,C)-( ) 1,254. 1,307. 1,365. 1,404. 1,441. 1,474. 1,510. 1,598. 1,761. 1,915. 2,100. 2,579. 2,662. 2,712.
70LS-(BL,C)-( ) 3,826. 4,018. 4,212. 4,355. 4,478. 4,591. 4,715. 5,024. 5,596. 6,380. 7,027. 8,685. 8,972. 9,149.
Construction
Base:
Steel wire with a polished chrome finish
or matte black powder-coat.
Frame and upholstery:
Foam over molded, reinforced fiberglass
shell on chair. Foam cushion over
molded plywood platform on ottoman.
Separate seat, back, and ottoman
cushions constructed of polyester fiber
with foam core.
Glides:
Stainless steel and nylon articulating
glides.
Medium and Child’s Womb Chairs:
Medium Womb chair and ottoman are
85% scale of standard Womb
chair. Child’s Womb chair is 75% scale
of standard chair. Child’s chair does not
have accompanying ottoman.
Approved KnollTextiles Grades/Fabric
A
Alignmentf
Bocce
Cat’s Cradle
Common Groundf
Monarchf
Prep
Stacks
B
Abacusf
Bank Shot
Belize
Betwixt
Bifold CR
Classic Boucle
Digit
Dovetailf
Fairway
Field Dayf
Grande
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitchf
Night Life
Nonchalant CR
Paradigm
Pogo
B continued
Ricochetf
Spark
Spotlight
Starry Nightf
Techno Tweed
Utmost
C
Atlas
Autobahn
Biota
Charm
Circa
Cricket
Earthwork
Echo
Empire Stripe *
English Accent *
Entourage *
Fibra
Galaf
Highline CR *
Hula Hoop
Kaleidoscope CR
Kora CR *
Legend CR
Lore CR
Metro
Posh
Quark
151
C continued
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR *
Smart
Spectator
Star Struck
Swing
Transitionf
Treble CR
Vibe *
Zari CR *
D
Compass CR
Eclat Weave
Harrison
Masquerade
Obi
Plain Linen
Satellite
E
Cross Stitch
Kimono
Luberon
Mamba
Plus
Whip
F
Coco
Cornaro *
Cuddle Cloth
Eclipse
Groove Line *
Icon
Rivington
Topography
G
Brugge
Garden City
Gibson
Hampshire *
Haze
Lyon
Spencer
Ultrasuedef
H
Arno
Bavaria
Lyonese Velvet
I
Byron *
Canaan
Cato
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Sandis
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España+
Hand Tipped+
Velluto Pelle
W
Alaska
Amazon
Arizona
Antique
Derby
Forte
Sabrina
KnollStudio
X
Ducale+
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed+
Marissa
Portofino+
Prima+
Riva
Note: All KnollTextiles and COM
fabrics are railroaded on the Womb chair.
* Approved for chair and ottoman
cushion upholstery only.
+ Not approved for small and medium
Womb chairs and ottomans.
f Approved for Cal 133 upholstery.
Check with your KnollTextile or
Spinneybeck Representative for any
changes or additions.

Designer(s):
Peter Shelton and Lee Mindel,
2006
Award(s):
Good Design Award, 2006
Order Code
Example: SM8A-B312-K162/20
SM8A Shelton Mindel side chair,
seat upholstery only
B312 Bronzed Cherry
K162/20 Classic Boucle, Neutral
The Shelton Mindel side chair is part of a
collection. Please refer to the SM lounge
collections starting on page 154 and the
SM table collection on page 250.
Specify:
1. Pattern number
2. Finish selection
3. Textile selection
Shelton Mindel
Shelton Mindel Side Chair
description seat h arm h w d h
textile
fabric
yds.
leather
sq. ft. weight finish
SM8A Arm chair 18� 24� 22� 23 1 /2� 32� 1 18 19 lbs. Other
finishes
18� 24� 22� 23 1 /2� 32� 1 18 24 lbs. Golden
Oak,
Maple
18� 24� 22� 23 1 /2� 32� 1 18 22 lbs. Light
Walnut
SM8A-U Arm chair, fully uph. 18� 24� 22� 23 1 /2� 32� 1.5 27 20 lbs. Other
finishes
18� 24� 22� 23 1 /2� 32� 1.5 27 25 lbs. Golden
Oak,
Maple
18� 24� 22� 23 1 /2� 32� 1.5 27 23 lbs. Light
Walnut
SM8R seat basket replacement for SM8A
and SM8A-U
Ordering Information
Oak with light lacquer finish:
Golden Oak (suffix GO)
Walnut with light lacquer finish:
Light Walnut (suffix LWT)
Maple:
Clear Maple (suffix KC)
Beech frame stains:
Bronzed Cherry (suffix B312)
Burnt Walnut (suffix B313)
Ebonized (suffix BE)
Light Cherry (suffix B315)
Light Walnut (suffix B411)
Medium Cherry (suffix B319)
Medium Red Mahogany (suffix BR)
Medium Walnut (suffix B323)
Natural Beech (suffix BN)
Peacock Green Walnut (suffix B415)
Smoked Walnut (suffix B418)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see
page 20.
152
KnollStudio wood finishes:
KnollStudio wood finishes complement a
large variety of KnollStudio veneer and
Knoll Office veneer finishes. To select
correct complementary finish, please
refer to KnollStudio Wood Finish Matrix
on page 25. If no complementary
standard finish is available, please refer
to custom finish policy below.
Custom finishes:
Complementary finishes to any
KnollStudio or Knoll Office wood finish
are available at no upcharge. To
complement non-Knoll wood veneer or
lumber finishes, a one-time,
non-negotiable net upcharge of $600
applies. Re-orders are at no upcharge.
Please contact your KnollStudio
representative, dealer or Customer
Service associate for complete custom
finish information and Order Code.
Minimum order quantity for any custom
finish order: 4 chairs.
Maintenance:
See pages 27-28.
Note:
The Shelton Mindel Side Chair is
Greenguard certified.
1 18
Construction
Frame:
Available in Beech, Walnut and Oak
hardwood with mortise and tenon
construction.
Upholstered Seat:
1 3 /4� thick seat filled with high density
polyurethane foam, with elastic webbing
suspension in a cross weave. Seat frame
is constructed of 1� plywood.
Fully Upholstered:
Inside back upholstery is inset in
frame. * indicates approved textiles and
leathers.
Finish:
Satin catalyzed lacquer finish. Oak and
Walnut versions have lower sheen.
Glides:
Chairs feature plastic glides.
Certified Wood:
Chairs manufactured using FSC certified
hardwoods are available through Custom
Product Development. Extended
leadtime and upcharge apply.

pattern no.
grades
A
COM
B C D E F G H I
COM
U V W X Y
SM8A-( ) $1,366. $1,390. $1,413. $1,438. $1,459. $1,473. $1,499. $1,547. $1,582. $1,695. $1,782. $1,956. $1,992. $2,036.
SM8A-(GO,KC) 1,641. 1,665. 1,688. 1,713. 1,734. 1,748. 1,773. 1,821. 1,857. 1,970. 2,057. 2,231. 2,267. 2,310.
SM8A-(LWT) 1,870. 1,894. 1,917. 1,942. 1,963. 1,977. 2,002. 2,050. 2,086. 2,199. 2,285. 2,460. 2,495. 2,539.
SM8A-U-( ) 1,646. 1,681. 1,715. 1,754. 1,784. 1,807. 1,844. 1,917. 1,969. 2,139. 2,267. 2,530. 2,585. 2,648.
SM8A-U-
(GO,KC)
1,870. 1,905. 1,938. 1,977. 2,007. 2,030. 2,068. 2,140. 2,192. 2,363. 2,490. 2,754. 2,809. 2,872.
SM8A-U-(LWT) 2,117. 2,153. 2,186. 2,225. 2,255. 2,278. 2,316. 2,388. 2,440. 2,610. 2,738. 3,001. 3,057. 3,119.
SM8R-( ) 369. 390. 410. 432. 450. 463. 485. 527. 558. 840. 916. 1,069. 1,100. 1,138.
Approved KnollTextiles Grades/Fabrics
A
Alignment
Bocce *
Cat’s Cradle *
Common Ground
Dristi
Mariner *
Monarch
Prep *f
Presto *f
Stacks
B
Abacus
Bank Shotf
Belize *
Betwixt
Classic Boucle *
Close Knit
Dovetail
Fairway
Field Day *f
Grande
Knoll Felt *
Knoll Hopsack *
Lyric
Mini Stitch *
B continued
Night Life
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Nightf *
Triple Lace
Utmost *
Vinyl
Wide Angle *f
Zephyr
C
Atlas *
Biota *
Circa
Cricket
Earthwork *
Echo
English Accent
Enmesh *f
Entourage *
Fibra
Gala *
C continued
Highline CR
Hula Hoop
Kaleidoscope CR
Legend CR *
Lore CR *
Metro
Panache CR *
Parasol
Posh *
Quark *
Regard CR
Rio
Roundtrip *
Sahara
Sandpiper *
Sequin CR
Smart *
Spectator *
Star Struck
Stepping Stones
Swing *
Transition
Treble CR
Vibe *
D
Cavalier *
Compass CR *
Eclat Weave
Harrison *
Hologram
In The Loop *
Masquerade
Obi *
Plain Linen *
Satellite
Satin Chisel
Zoom
E
Cross Stitchf
Kimono
Luberon
Mamba
Plus
Whip *
F
Calais Cotton
Velvet *
Coco
Cornaro *
Eclipse *
Groove Line
Rivington
153
F continued
Topography
Tweed Frieze
Una *
G
Brugge *
Garden City *
Hampshire
Haze
Lyon *
Spencer
Ultrasuede *f
H
Arno *
Bavaria *
Lyonese Velvet
I
Byron *
Canaan *
Cato *
Cummings *
Galloway *
Gates *
Jaipur
Knoll Velvet *
North Island *
Sandis
Stirling *
Walker *
Worth
Spinneybeck Leather
U
Vicenza *f
Volo *f
V
Acqua *f
Andes *f
Espana *f
Maremmaf
Velluto Pelle *f
W
Alaska *f
Amazon *f
Antique *f
Arizona *f
Forte *f
Sabrina *f
KnollStudio
X
Ducale *f
Ducale Velours *f
Y
Capri *f
Cervo *
Copenhagen *f
Cordovan *f
Distressed *f
Marissa *f
Prima *f
Riva *f
Salon *f
*Approved for fully upholstered
versions.
f Approved for Cal 133 upholstery.
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Peter Shelton and Lee Mindel,
2006
Order Code
Example: SM1-1-AOC-K349/1
SM1-1 SM1 Lounge Chair
AOC Clear Oak legs
K349/1 Alignment, Sand
The SM1 lounge collection is part of a
collection. Please refer to the Shelton
Mindel side chair on page 152, SM2
lounge collection on page 156 and the
SM table collection on page 250.
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Shelton Mindel
SM1 Lounge Collection
description seat h arm h w d h
textile
fabric
yds.
leather
sq. ft. weight
SM1-1 SM1 Lounge chair 15 1 /2� 25 1 /2� 39� 32 1 /4� 25 1 /2� 6.5 80 83 lbs.
SM1-2 SM1 Settee 15 1 /2� 25 1 /2� 61 1 /2� 32 1 /4� 25 1 /2� 9.0 120 96 lbs.
SM1-3 SM1 Sofa 15 1 /2� 25 1 /2� 85 1 /2� 32 1 /4� 25 1 /2� 11.3 148 116 lbs.
Ordering Information
Leg finishes:
Clear Oak (suffix AOC)
Ebonized (suffix AE)
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
154
Construction
Frame:
Constructed in multi ply plywood with
sinuous spring seat suspension and
elastic webbing back suspension.
Upholstery:
Seat and back cushions are continuous
on all models.
Cushion fill:
Arm, seat and back cushions in variable
density foam with Dacron wrap.
Stitching:
Double-needled topstitching on leather
upholstery. Double-needled topstitching
on thin solid textiles, single-blind
stitching on heavily ribbed fabrics and
multicolor prints.
Legs:
Round legs in Ash hardwood stained in
clear oak or ebonized finish.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
SM1-1-( )-( ) $3,514. $3,670. $3,818. $3,982. $4,116. $4,213. $4,376. $4,689. $4,919. $5,635. $6,112. $7,085. $7,288. $7,524.
SM1-2-( )-( ) 5,248. 5,464. 5,670. 5,897. 6,082. 6,216. 6,442. 6,875. 7,194. 8,362. 9,080. 10,539. 10,842. 11,195.
SM1-3-( )-( ) 6,199. 6,470. 6,729. 7,013. 7,246. 7,414. 7,699. 8,241. 8,641. 10,003. 10,888. 12,687. 13,061. 13,498.
Approved KnollTextiles Grades/Fabrics
A
Alignmentf
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Heavy Metal
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Bank Shot
Belize
Betwixtf
Chroma
Classic Boucle
Fairway
Field Dayf
Gusto CR *
Knoll Felt
Knoll Hopsack
Nonchalant CRf
B continued
Paradigm
Pogo
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Zephyr
C
Atlas
Biotaf
Circa
Cricket
Decade
Earthworkf
Enmeshf
Entourage
Fibra
Kaleidoscope CR
Kora CR
Moto CR
Panache CR *
Parasol
C continued
Roundtrip
Sahara
Sandpiper
Sequin CR
Star Struck
Swing
Transitionf
Vibe
D
Cavalier
Eclat Weave *
Harrison
Plain Linen
Satellite
Satin Chisel
E
Luberon *
Mamba
Whip
F
Calais Cotton
Velvet *
Coco
Cornaro
Groove Line *
Rivington
Topography
Tweed Frieze *
G
Brugge
Garden City
Hampshire
Haze *
Lyon
Spencer
Ultrasuedef
155
H
Arno
I
Cato
Gates
Knoll Velvet *
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Espanaf
Maremmaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Velourf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
fApproved for Cal 133 upholstery.
* Indicates fabrics without topstitching.
Check with your KnollTextiles or
Spinneybeck Representative for additions
or changes.

Designer(s):
Peter Shelton and Lee Mindel,
2006
Order Code
Example: SM2-2-PC-K349/1
SM2-2 SM2 Lounge Collection,
settee
PC Polished Chrome legs
K349/1 Alignment, Sand
Example: SM2S-2-AE-VOBLK-
K349/1
SM2-2 SM2 Lounge Collection,
settee
AE Ebonized legs
VOBLK Surround in Volo, Black
K349/1 Cushions in Alignment,
Sand
The SM2 lounge collection is part of a
collection. Please refer to the Shelton
Mindel side chair on page 152, SM1
lounge collection on page 154 and SM
table collection on page 250.
Specify:
1. Pattern number
2. Leg finish
3. Textile selection
Specify with split upholstery:
1. Pattern number
2. Leg finish
3. Textile selection, Surround
4. Textile selection, Cushions
Shelton Mindel
SM2 Lounge Collection
description seat h arm h w d h type
SM2-1 SM2 Lounge chair, same upholstery,
frame and cushions
SM2-1 SM2 Lounge chair, combination
upholstery, frame and cushions
SM2-2 SM2 Settee, same upholstery, frame
and cushions
SM2-2 SM2 Settee, combination upholstery,
frame and cushions
SM2-3 SM2 Sofa, same upholstery, frame
and cushions
SM2-3 SM2 Sofa, combination upholstery,
frame and cushions
Ordering Information
Leg finishes:
Clear Oak (suffix AOC)
Ebonized (suffix AE)
Polished Chrome (suffix C)
Upholstery/ COM information:
Prices shown includes fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Maintenance:
See pages 27-28.
textile
fabric
yds.
leather
sq ft weight
17 3 /4� 23 3 /4� 39 1 /4� 36 1 /2� 29� 8.3 124 56 lbs.
17 3 /4� 39 1 /4� 36 1 /2� 29� frame
uph.
5 76
upchg,
cushions
4.25 56
17 3 /4� 23 3 /4� 66 1 /2� 36 1 /2� 29� 13.25 168 77 lbs.
17 3 /4� 66 1 /2� 36 1 /2� 29� frame
uph.
7.5 104
upchg,
cushions
7.5 80
17 3 /4� 23 3 /4� 93 1 /2� 36 1 /2� 29� 19.5 208 108 lbs.
17 3 /4� 93 1 /2� 36 1 /2� 29� 9.5 128
upchg,
cushions
11.25 104
156
Construction
Frame:
Constructed in 7 /8� multi ply plywood with
sinuous spring seat suspension and
matrix back suspension.
Upholstery:
One seat and back cushion for
the Lounge chair, two seat and back
cushions for the Settee and three seat
and back cushions for the Sofa. For units
with combination upholstery, add list
price of surround in appropriate grade
with the list price of cushions to obtain
total list price for item.
Cushion fill:
Arm, seat and back cushions in variable
density foams with Dacron wrap. The
seat and back cushions are filled with
memory foam.
Stitching:
Double needle top stitching on arms and
back. Single needle top stitching on seat
and back cushions in textile, double
needle stitching for leather.
Legs:
Round legs in Ash substrate with a Clear
Oak or Ebonized finish.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
SM2-1-( )-( ) $4,530. $4,730. $4,919. $5,129. $5,299. $5,423. $5,633. $6,031. $6,324. $7,718. $8,459. $9,981. $10,282. $10,646.
SM2S-1-( )-( )-( ) 3,626. 3,770. 3,907. 4,059. 4,182. 4,272. 4,422. 4,711. 4,924. 5,328. 5,783. 6,708. 6,900. 7,124.
upchg,
cushions
1,334. 1,436. 1,533. 1,641. 1,727. 1,791. 1,899. 2,103. 2,253. 2,597. 2,931. 3,613. 3,755. 3,919.
SM2-2-( )-( ) 6,783. 7,102. 7,405. 7,738. 8,011. 8,207. 8,542. 9,178. 9,648. 10,973. 11,977. 14,020. 14,445. 14,939.
SM2S-2-( )-( )-( ) 5,321. 5,513. 5,696. 5,898. 6,062. 6,181. 6,383. 6,767. 7,051. 7,661. 8,283. 9,547. 9,809. 10,117.
upchg,
cushions
1,991. 2,170. 2,342. 2,531. 2,686. 2,797. 2,987. 3,347. 3,613. 3,731. 4,208. 5,181. 5,384. 5,620.
SM2-3-( )-( ) 8,779. 9,247. 9,693. 10,185. 10,586. 10,876. 11,368. 12,305. 12,996. 13,861. 15,104. 17,633. 18,160. 18,771.
SM2S-3-( )-( )-( ) 6,867. 7,143. 7,406. 7,695. 7,933. 8,104. 8,393. 8,946. 9,354. 9,673. 10,439. 11,995. 12,318. 12,695.
upchg,
cushions
2,616. 2,886. 3,143. 3,428. 3,659. 3,826. 4,109. 4,649. 5,048. 4,810. 5,432. 6,696. 6,960. 7,266.
Approved KnollTextiles Grades/Fabrics
A
Alignmentf
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Heavy Metal
Mariner
Monarchf
Prepf
Prestof
Stacks
B
Abacusf
Bank Shot
Belize
Betwixtf
Bifold CR
Chroma
Classic Boucle
Digit
Fairway
Field Dayf
Gusto CR *
Knoll Felt
Knoll Hopsack
Night Life
B continued
Nonchalant CRf
Paradigm
Pogo
Pop
Ricochetf
Sparkf
Spinoff Nuance
Spotlight
Starry Nightf
Triple Lace
Utmost
Vinyl
Zephyr
C
Atlas
Autobahn
Biotaf
Circa
Cricket
Decade
Earthworkf
C continued
English Accent *
Enmeshf
Entourage
Fibra
Fox Trot CR
Gala
Hula Hoop
Kaleidoscope CR
Kora CR
Metro
Moto CR
Panache CR *
Parasol
Roundtrip
Sahara
Sandpiper
Sequin CR
Star Struck
Stepping Stones
Swing
Transitionf
Vibe
Zari CR
D
Cavalier
Eclat Weave *
Harrison
Masquerade
Plain Linen
Satellite
Satin Chisel
E
Luberon *
Mamba
Whip
F
Calais Cotton
Velvet *
Coco
Cornaro
Eclipse
Groove Line *
Icon *
Rivington
157
F continued
Topography
Tweed Frieze *
G
Brugge
Garden City
Hampshire
Haze *
Lyon
Spencer
Ultrasuedef
H
Arno
I
Cato *
Galloway
Gates
Knoll Velvet *
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenzaf
Volof
V
Acquaf
Andesf
Espanaf
Maremmaf
Velluto Pellef
W
Alaskaf
Amazonf
Antiquef
Arizonaf
Derbyf
Fortef
Sabrinaf
KnollStudio
X
Ducalef
Ducale Velourf
Y
Caprif
Cervo
Copenhagenf
Cordovanf
Distressedf
Marissaf
Primaf
Rivaf
Saddlef
fApproved for Cal 133 upholstery.
* Indicates fabrics without topstitching.
Check with your KnollTextiles or
Spinneybeck Representative for additions
or changes.

Designer(s):
Peter Stamberg and Paul Aferiat,
1994
Award(s):
Honorable Mention, ID Design
Review, 1995
Order Code
Example: 66S1-M-TF-B-K787/10
(2)66SH-A-TF-B
66S1 Lounge chair
M Grommet option
TF Tutti Frutti leg finishes
B Natural Beech frame
K787/10 Calais Cotton Velvet,
Lipstick
(2)66SH-A Two arm shelves
TF Tutti Frutti bracket finishes
B Natural Beech shelf finish
Specify:
1. Pattern number
2. Grommet option
3. Leg finish selection
4. Wood frame finish
5. Textile selection
6. Arm shelf option pattern number
7. Shelf bracket finish
8. Shelf finish
Stamberg Aferiat
Salsa� Lounge Seating
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
66S1-Y Lounge chair without grommets 16 3 /4� 24 3 /8� 31� 30� 29� 2.8 50 87 lbs.
66S1-M Lounge chair with grommets for
shelves
16 3 /4� 24 3 /8� 47� 30� 29� 2.8 50 89 lbs.
66S2-Y Settee without grommets 16 3 /4� 24 3 /8� 60� 30� 29� 5.5 100 136 lbs.
66S2-M Settee with grommets for shelves 16 3 /4� 24 3 /8� 76� 30� 29� 5.5 100 138 lbs.
66S3-Y Sofa without grommets 16 3 /4� 24 3 /8� 88� 30� 29� 8.3 150 185 lbs.
66S3-M Sofa with grommets for shelves 16 3 /4� 24 3 /8� 104� 30� 29� 8.3 150 188 lbs.
Ordering Information
Grommet option:
Grommets (suffix M)
No grommets: (suffix Y)
Leg and shelf bracket finishes:
Real Red (suffix RR)
Nasturtium Orange (suffix NO)
Daffodil Yellow (suffix DY)
Spring Green (suffix SG)
Cornflower Blue (suffix CB)
Wisteria Violet (suffix WV)
Tutti Frutti, mix of all above colors
(suffix TF)
Copper (suffix CO)
Tungsten (suffix TU)
Dark Metallic Grey (suffix V)
Custom mix of colors:
Add 5% to list price and provide
descriptive drawing.
Wood frame and shelf finishes:
Maple (suffix K)
Natural Beech (suffix B)
Medium Red Mahogany (suffix Z)
Warm Brown Walnut (suffix J)
Ebonized Walnut (suffix D)
158
Side cushion:
Specify side cushions separately. Narrow
side cushion recommended for lounge
chairs.
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Shelf specification note:
Additional shelf options are listed on
page 160. Shelves are shipped
separately, and installed on site.
The Salsa Lounge Seating Collection is
Greenguard certified.
Glides:
Plastic glides.
Maintenance:
See pages 27-28.
Construction
Grommets, legs & shelf supports:
1 1 /3�Dx8 1 /4�H legs are cold-rolled 14
gauge seamless steel tubing. 1 1 /4�D shelf
supports are aluminum alloy. Copper and
tungsten finishes are powder-coated
finishes. Grommets are 1 1 /4� aluminum
castings with tungsten powder-coat finish
on side and back. 12 grommets per
lounge chair; 14 grommets per settee; 16
grommets per sofa. Shelf supports are
nickel-plated steel.
Wood frame and shelves:
Natural veneer over 1 1 /4� thick solid
fiberboard core.
Upholstery:
Highly resilient Dymetrol seat
suspension over black plywood frame
attached to black 12-gauge steel frame.
Welting detail with both leather and
textile upholstery.
Cushion fill:
5� thick polycore with a soft,
double-wrapped quilted dacron wrap for
a softer sit. Cushion displays moderate
crowning.

pattern no.
grades
A
COM
B C D E F G H I
COL
U V W X Y
66S1-Y $3,323. $3,421. $3,520. $3,595. $3,658. $3,713. $3,777. $3,933. $4,224. $4,936. $5,291. $6,011. $6,161. $6,337.
66S1-M 3,450. 3,551. 3,649. 3,718. 3,784. 3,838. 3,903. 4,061. 4,350. 5,062. 5,416. 6,139. 6,289. 6,462.
66S2-Y 5,115. 5,309. 5,500. 5,644. 5,765. 5,877. 6,001. 6,310. 6,880. 8,342. 9,052. 10,494. 10,795. 11,145.
66S2-M 5,327. 5,520. 5,713. 5,856. 5,978. 6,091. 6,214. 6,522. 7,095. 8,554. 9,265. 10,707. 11,007. 11,356.
66S3-Y 6,910. 7,202. 7,493. 7,705. 7,895. 8,063. 8,251. 8,715. 9,580. 11,834. 12,813. 14,977. 15,513. 15,909.
66S3-M 7,207. 7,497. 7,789. 8,004. 8,193. 8,360. 8,549. 9,011. 9,875. 12,129. 13,113. 15,275. 15,813. 16,206.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Mariner
Monarch
Prep
Presto
Stacks
B
Abacus
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chroma
Classic Boucle
B continued
Digit
Digital Tape
Dovetail
Fairway
Field Day
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Autobahn
Biota
Charm
Circa
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
C continued
Panache CR
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Satellite
Satin Chisel
Zoom
159
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
KnollStudio
W continued
Forte
Sabrina
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Check with your KnollTextiles or
Spinneybeck Representative for changes or
additions.

Designer(s):
Peter Stamberg and Paul Aferiat,
1994
Order Code
Example: 66SH-A-CO-D
66SH-A Arm shelf
CO Copper bracket
D Ebonized Walnut shelf
Specify:
1. Pattern number
2. Bracket finish
3. Shelf finish
Stamberg Aferiat
Salsa� Lounge Seating Shelf and Side Cushion Options
description w d h
textile
fabric yds.
req. leather
sq. ft. weight
66SH-A Arm shelf 30 1 /8� 8� 1 1 /4� 11 lbs.
66SH-B Partial width single seat back shelf 39 1 /4� 8� 1 1 /4� 13 lbs.
66SH-C Full width single seat back shelf 47 1 /4� 8� 1 1 /4� 15 lbs.
66SH-D Partial width double seat back shelf 67 3 /4� 8� 1 1 /4� 22 lbs.
66SH-E Full width double seat back shelf 75 3 /4� 8� 1 1 /4� 25 lbs.
66SH-F Partial width triple seat back shelf 96 1 /4� 8� 1 1 /4� 32 lbs.
66SH-G Full width triple seat back shelf 104 1 /4� 8� 1 1 /4� 34 lbs.
66SC-N Narrow side cushion (single) 3� 21� 9� 0.8 14
66SC-W Wide side cushion (single) 6� 21� 9� 0.8 14
Ordering Information
Painted shelf bracket finishes:
Real Red (suffix RR)
Nasturtium Orange (suffix NO)
Daffodil Yellow (suffix DY)
Spring Green (suffix SG)
Cornflower Blue (suffix CB)
Wisteria Violet (suffix WV)
Tutti Frutti, mix of all above colors
(suffix TF)
Copper (suffix CO)
Tungsten (suffix TU)
Dark Metallic Grey (suffix V)
160
Custom mix of colors:
For custom mix of colors, add 5% to list
price and provide descriptive drawing.
Shelf finishes:
Maple (suffix K)
Natural Beech (suffix B)
Medium Red Mahogany (suffix Z)
Warm Brown Walnut (suffix J)
Ebonized Walnut (suffix D)
Shelf specification note:
Shelves are shipped separately, and
installed on site. Partial width back
shelves are non-handed with pre-drilled
inserts for left or right installation.
Note:
The Salsa Lounge Seating Collection is
Greenguard certified.
Maintenance:
See pages 27-28.
Contruction
Shelf supports and spacers:
1 1 /4�d shelf supports are aluminum alloy.
Copper and tungsten finishes are
powder-coated finishes. Shelf supports
are nickel-plated steel.
Number of shelf supports per shelf:
A: 2 E: 3
B: 2 F: 4
C: 2 G: 4
D: 3
Shelves:
Natural veneer over 1 1 /4� thick, solid
fiberboard core.

pattern no. list
66SH-A $423.
66SH-B 511.
66SH-C 595.
66SH-D 679.
66SH-E 765.
66SH-F 977.
66SH-G 1,144.
grades
A
COM
B C D E F G H I
COL
U V W X Y
66SC-N 238. 265. 296. 316. 333. 351. 368. 414. 496. 651. 751. 950. 997. 1,045.
66SC-W 238. 265. 296. 316. 333. 351. 368. 414. 496. 651. 751. 950. 997. 1,045.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cat’s Cradle
Common Ground
Cotton Duck
Dristi
Mariner
Monarch
Prep
Presto
Stacks
B
Abacus
Backdrop
Bank Shot
Belize
Betwixt
Bifold CR
Chroma
Classic Boucle
B continued
Digit
Digital Tape
Dovetail
Fairway
Field Day
Grande
Gusto CR
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Night Life
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spinoff Nuance
Spotlight
Starry Night
Triple Lace
Utmost
Vinyl
Wide Angle
Zephyr
C
Autobahn
Biota
Charm
Circa
Earthwork
Echo
Empire Stripe
English Accent
Enmesh
Entourage
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
Hula Hoop
Kaleidoscope CR
Kora CR
Legend CR
Lore CR
Metro
Moto CR
C continued
Panache CR
Quark
Regard CR
Rio
Roundtrip
Sandpiper
Sequin CR
Smart
Spectator
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Zari CR
D
Cavalier
Compass CR
Eclat Weave
Harrison
Hologram
In The Loop
Masquerade
Obi
Satellite
Satin Chisel
Zoom
161
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Cornaro
Eclipse
Groove Line
Icon
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Rattan
Spencer
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Knoll Velvet
North Island
Stirling
Walker
Worth
Spinneybeck Leather
U
Vicenza
Volo
V
Acqua
Andes
España
Hand Tipped
Velluto Pelle
W
Alaska
Amazon
Antique
Arizona
Derby
KnollStudio
W continued
Forte
Sabrina
X
Ducale
Ducale Velours
Y
Capri
Cervo
Copenhagen
Cordovan
Distressed
Marissa
Portofino
Prima
Riva
Check with your KnollTextiles or
Spinneybeck representative for changes or
additions.

Stamberg Aferiat
Salsa� Lounge Seating Specification Form
Lounge Seating Pattern Number
66S
Quantity Model Grommet Leg Color Wood Finish Upholstery
1 Club Chair
2 Settee
3 Sofa
Y no grommets
M grommets
See below See below Textile
Leather
66SH
Quantity Type of Shelf Bracket Color Wood Finish
Quantity
Shelf Pattern Numbers
A
B
C
D
E
F
G
Side Cushions Pattern Number
66SC
Model
N Narrow
W Wide
CO copper
TU tungsten
V dark metallic grey
RR real red
NO nasturtium orange
DY daffodil yellow
SG spring green
CB cornflower blue
WV wisteria violet
TF tutti frutti
Type of Shelf Shelves are non-handed. They can be specified at left, right, top and bottom.
Club Chair
Settee
Sofa
K
B
Z
J
D
maple
natural beech
med. red
mahogany
warm brown walnut
ebonized walnut
Upholstery
Textile
Leather
A B C D E F G
162

Recommended Shelf Combinations
163
KnollStudio

Designer(s):
Kazuhide Takahama, 1965
Order Code
Example: 53S1-K134/21
53S1 Suzanne lounge chair
K134/21 Bank Shot, Thyme
Specify:
1. Pattern number
2. Textile selection
Kazuhide Takahama
Suzanne Lounge Seating
description seat h w d h
textile
fabric yds. weight
53S1 Lounge chair 14 1 /2� 30 1 /2� 35� 27� 3.4 53 lbs.
53D1 Double lounge chair 14 1 /2� 30 1 /2� 59� 27� 4.6 79 lbs.
53S2 Settee 14 1 /2� 60� 35� 27� 6.8 98 lbs.
53S3 Sofa 14 1 /2� 83� 35� 27� 10.2 146 lbs.
Ordering Information
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your KnollStudio
representative for colors. only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
164
Maintenance:
See pages 27-28.
Notes:
The Suzanne Lounge Seating is
Greenguard certified.
Construction
Frame:
Aluminum extrusion, polished aluminum
end caps and top edge. Brushed
aluminum sides. Comes with plastic
glides
Upholstery:
Separate high-resilient Cal 117 foam
cushions with MDF seat and back
suppots structure.

Designer(s):
Ufficio Tecnico, 1971
Order Code
Example: 50CS-BL1901
50CS Spoleto armless chair
BL1901 Belting leather, Fudge
Specify:
1. Pattern number
2. Sling material and color selection
Ufficio Tecnico
Spoleto Chair
description seat h w d h weight
50CS Spoleto armless chair 18� 18 1 /2� 23 1 /2� 32� 17 lbs.
50KIT Replacement sling kit with nylon
laces, cowhide
50KIT Replacement sling kit with nylon
laces, belting leather
50LACE Replacement nylon laces for
cowhide, belting leather and hair hide slings
Ordering Information
Spinneybeck Belting Leather:
Black (suffix BLBLCK)
Chocolate (suffix BL1902)
Cinnamon (suffix BL1904)
Dark Mustard (suffix BL1903)
Dark Salmon (suffix BL1906)
Deep Blue (suffix BL1912)
Deep Green (suffix BL1911)
Deep Purple (suffix BL1913)
Fudge (suffix BL1901)
Key Lime (suffix BL1910)
Lemon Meringue (suffix BL1909)
Simply Red (suffix BL1905)
Sunshine (suffix BL1908)
Sweet Potato (suffix BL1907)
White (suffix BL1914)
Cowhide selection:
Black (suffix L80)
Light Brown (suffix L82)
White Beige (suffix L84)
166
Haired Hide:
Black (BLCKHH)
Black and White (BKWHHH)
Chestnut (suffix OA12HH)
Coffee (suffix O18HH)
Gold (suffix OCP5HH)
Mahogany (suffix OA19HH)
Tan (suffix OCP3HH)
Tri-Color (3COLHH)
Upholstery/COM information:
Prices shown include leather upholstery.
Customer’s Own Material is not
available.
KnollStudio 20-day Program:
The Spoleto chair is available on the
20-day program in black belting leather.
For more information, consult pages
29-32.
Maintenance:
See pages 27-28.
Note:
Please ask your Spinneybeck
Representative for samples of the belting
leather and haired hide.

pattern no.
50CS-( ) $1,659.
50KIT-L ( ) 747.
50KIT-(BL, HH) ( ) 747.
50LACE-(L, BL, HH)-( ) 72.
Construction
Frame:
Seamless tubular steel in polished
chrome finish.
Upholstery:
Cowhide Slings:
Thick cowhide leather slings in three
colors. Edges dyed to match for Black
and Light Brown colors. White Beige
will have edges matching Light Brown
cowhide color.
Belting Leather:
Highly durable Spinneybeck belting
leather in fifteen colors. Belting leather
edges will always match specified color.
Haired Hide:
Spinneybeck haired hide in eight colors.
Haired Hide is a natural material,
markings are one-of-a-kind and will vary
from piece to piece.
Laces:
Nylon laces are dyed to match specified
leather. Haired hide and belting leather
option will have nylon laces.
Glides:
Four molded clear plastic glides with
twin-pin snap-in construction included
with all Spoleto chairs.
Replacement Slings:
Slings can be replaced in the field by
field services or a furniture repair
specialist. Kit includes back and seat
replacement slings with nylon laces.
Slings should be fitted by field services
or by a professional upholsterer.
167
KnollStudio

Designer(s):
Vignelli Designs, 1983
Order Code
Example: 4901-W-V
4901 Handkerchief
unupholstered armless
chair
W White shell
V Dark metallic grey frame
Note:
The Vignelli Handkerchief side chairs
are part of a collection. Please refer to
Vignelli PaperClip Tables on page 252.
Specify:
1. Pattern number
2. Shell color selection
3. Base finish selection
4. Glide option
5. Cal 133 Fire Code option for seat pad
6. Textile selection for seat pad
Vignelli Associates
Handkerchief Armless Chair
description seat h w d h
textile fabric
yds. weight
4901 Armless chair, unupholstered shell 18� 23� 22 1 /2� 29� 21 lbs.
18� 23� 22 1 /2� 29� 21 lbs.
4901K-N Armless chair, seat pad,
non-stacking
18� 23� 22 1 /2� 29� 7 23 lbs.
18� 23� 22 1 /2� 29� 7 23 lbs.
4901K-S Armless chair, seat pad, stacking 18� 23� 22 1 /2� 29� 7 23 lbs.
18� 23� 22 1 /2� 29� 7 23 lbs.
49100D Stacking dolly 24 5 /8� 26� 12� 10 lbs.
G Optional glides
Ordering Information
Shell colors:
Black (suffix B)
Grey (suffix G)
Midnight (MD)
Red (suffix R)
White (suffix W)
Base finishes:
Dark Metallic Grey (suffix V)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown include fabric upholstery.
Contact your Knoll representative for
colors. Only approved KnollTextiles and
Spinneybeck leathers may be ordered.
168
Customer’s Own Material is available
pending approval. For approval
requirements, proccessing instructions
and ordering information please see page
20.
Cal 133 Fire Code f:
Handkerchief Chairs comply with
California Technical Bulletin 133
unupholstered and in selected
upholstery. Specify suffix -C at end of
pattern number and suffix -133 at end of
textile selection. Upcharge applies, see
page 18.
Maintenance:
See pages 27-28.
Note:
The Handkerchief Armless Chair is
Greenguard certified.
Construction
Shell:
Compression-molded. Highly durable
fiberglass reinforced polyester; with
urethane paint finish.
Seat pad:
High-resilience polyurethane cushion
bonded to a semi-rigid thermoformed
support.
Base:
7/16� steel wire finished in smooth
powder-coating, or brightly polished
chrome.
Optional glides:
Nylon. (Add -G to end of pattern number)
Stacking bumper:
Black flexible urethane stacking pad
secured between base and shell.

pattern no.
4901-( )-(V, 612) $562.
4901-( )-C 649.
grades
A
COM
B C D E F G H I
4901K-N-( )-(V, 612)-( ) 908. 927. 947. 968. 984. 999. 1,020. 1,060. 1,090.
4901K-N-( )-C-( ) 943. 961. 981. 1,002. 1,019. 1,034. 1,054. 1,094. 1,124.
4901K-S-( )-(V, 612)-( ) 944. 963. 982. 1,003. 1,021. 1,032. 1,054. 1,094. 1,124.
4901K-S-( )-C-( ) 977. 997. 1,016. 1,037. 1,054. 1,066. 1,088. 1,128. 1,158.
49100D 1,387.
G 24.
Stacking features:
4901 and 4901K-S chairs stack 15-20
high. Chairs without stacking bumper
(4901K-N) do not stack.
Stacking dolly:
16 gauge steel with side bumper strips
and four 5� casters (two which swivel).
Total height of 24 chairs stacked on the
dolly is 85�.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cats Cradle
Common Groundf
Monarch
Prep
B
Bank Shot
Belize
Betwixt
Chromaf
Classic Boucle
Close Knit
Digit
Dovetail
Field Day
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Paradigm
Pogof
B continued
Ricochet
Spark
Spotlight
Starry Night
Techno Tweed
Utmost
Wide Angle
C
Atlas
Autobahn
Biota
Circa
Decade
Enmesh
Entourage
Fable CR
Fibra
Galaf
Highline CR
Hula Hoop
169
C continued
Kaleidoscope CR
Legend CR
Lore CR
Regard CR
Rio
Roundtrip
Smart
Spectator
Stepping Stones
Transition
Treble CR
D
Compass CR
Eclat Weave
Harrison
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
E
Kimono
Luberon
Plus
Whip
F
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Rivington
Topography
Tweed Frieze
G
Garden City
Gibson
Hampshire
Lyon
Rattan
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Galloway
Gates
Jaipur
Mepal
Sandis
Stirling
Walker
Worth
KnollStudio
f Approved for Cal 133 upholstery.
Check with your KnollTextiles
representative for changes or additions.

Designer(s):
Vignelli Designs, 1983
Order Code
Example: 4902-MD-C
4902 Handkerchief
unupholstered arm chair
MD Midnight shell
C Chrome frame
Note:
The Vignelli Handkerchief side chairs
are part of a collection. Please refer to
Vignelli PaperClip Tables on page 252.
Specify:
1. Pattern number
2. Shell color selection
3. Base finish selection
4. Glide option
5. Cal 133 Fire Code option for seat pad
6. Textile selection for seat pad
Vignelli Associates
Handkerchief Arm Chair
description seat h arm h w d h
textile
fabric yds. weight
4902 Arm chair, unupholstered shell 18� 26� 26� 22 1 /2� 29� 24 lbs.
18� 26� 26� 22 1 /2� 29� 24 lbs.
4902K-N Arm chair, seat pad, non-stacking 18� 26� 26� 22 1 /2� 29� 7 26 lbs
18� 26� 26� 22 1 /2� 29� 7 26 lbs.
4902K-S Arm chair, seat pad, stacking 18� 26� 26� 22 1 /2� 29� 7 26 lbs.
18� 26� 26� 22 1 /2� 29� 7 26 lbs.
49100D Stacking dolly 24 5 /8� 26� 12� 10 lbs.
G Glides (add -G to end of pattern number)
Ordering Information
Shell colors:
Black (suffix B)
Grey (suffix G)
Midnight (MD)
Red (suffix R)
White (suffix W)
Base finishes:
Dark Metallic Grey (suffix V)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Upholstery/COM information:
Prices shown include fabric upholstery.
Contact your Knoll representative for
colors. Only approved KnollTextiles and
Spinneybeck leathers may be ordered.
170
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Cal 133 Fire Code f:
Handkerchief Chairs comply with
California Technical Bulletin 133
unupholstered and in selected
upholstery. Specify suffix -C at end of
pattern number and suffix -133 at end of
textile selection. Upcharge applies, see
page 18.
Maintenance:
See pages 27-28.
Note:
The Handkerchief Arm Chair is
Greenguard certified.
Construction
Shell:
Compression-molded. Highly durable
fiberglass reinforced polyester; with
urethane paint finish.
Seat pad:
High-resilience polyurethane cushion
bonded to a semi-rigid thermoformed
support.
Base:
7/16� steel wire finished in smooth
powder-coating, or brightly polished
chrome.
Optional glides:
Nylon. (Add -G to end of pattern number)
Stacking bumper:
Black flexible urethane stacking pad
secured between base and shell.

pattern no.
4902-( )-(V, 612) $703.
4902-( )-C 809.
grades
A
COM
B C D E F G H I
4902K-N-( )-(V, 612)-( ) 1,015. 1,036. 1,054. 1,075. 1,093. 1,107. 1,114. 1,167. 1,197.
4902K-N-( )-C-( ) 1,063. 1,084. 1,102. 1,123. 1,141. 1,155. 1,162. 1,215. 1,245.
4902K-S-( )-(V, 612)-( ) 1,051. 1,071. 1,091. 1,112. 1,130. 1,142. 1,163. 1,203. 1,233.
4902K-S-( )-C-( ) 1,096. 1,116. 1,136. 1,157. 1,175. 1,187. 1,208. 1,248. 1,278.
49100D 1,387.
G [4902] 24.
Stacking features:
4902 and 4902K-S chairs stack 15-20
high. Chairs without stacking bumper
(4902K-N) do not stack.
Stacking dolly:
16 gauge steel with side bumper strips
and four 5� casters (two which swivel).
Total height of 24 chairs stacked on the
dolly is 85�.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cat’s Cradle
Common Groundf
Monarch
Prep
B
Bank Shot
Belize
Betwixt
Chromaf
Classic Boucle
Close Knit
Digit
Dovetail
Field Day
Knoll Felt
Knoll Hopsack
Lyric
Mini Stitch
Paradigm
Pogof
B continued
Ricochet
Spark
Spotlight
Starry Night
Techno Tweed
Utmost
Wide Angle
C
Atlas
Autobahn
Biota
Circa
Compass CR
Decade
Enmesh
Entourage
Fable CR
Fibra
Galaf
Highline CR
Hula Hoop
171
C continued
Kaleidoscope CR
Legend CR
Lore CR
Regard CR
Rio
Roundtrip
Smart
Stepping Stones
Spectator
Transition
Treble CR
D
Eclat Weave
Harrison
In The Loop
Masquerade
Obi
Plain Linen
Satellite
Satin Chisel
E
Kimono
Luberon
Plus
Whip
F
Cornaro
Cuddle Cloth
Eclipse
Groove Line
Rivington
Topography
Tweed Frieze
G
Garden City
Gibson
Hampshire
Lyon
Rattan
Ultrasuede
H
Arno
Bavaria
Lyonese Velvet
I
Byron
Canaan
Cato
Cummings
Gates
Galloway
Jaipur
Mepal
Sandis
Stirling
Walker
Worth
KnollStudio
f Approved for Cal 133 upholstery.
Check with your KnollTextiles
representative for changes or additions.

Order Code
Example: KSP1-K1174/6
KSP1 Lumbar pillow, same
upholstery
K1174/6 Kimono, Sakura
Example: KSP3S-K1155/6-K1021/2
KSP3S Large throw
pillow, combination
upholstery
K1155/6 Jaipur, Ginger
K1021/2 Ultrasuede, Sand
Specify:
1. Pattern number
2. Upholstery selection
3. Upholstery selection for split
upholstery
KnollStudio
Throw Pillows
description w d
textile fabric
yds. type
KSP1 Lumbar pillow 21� 11� 0.4 same upholstery
KSP1S Lumbar pillow 21� 11� 0.4 combination
upholstery
KSP2 Throw pillow 17� 17� 0.4 same upholstery
KSP2S Throw pillow 17� 17� 0.4 combination
upholstery
KSP3 Large throw pillow 24� 24� 0.7 same upholstery
KSP3S Large throw pillow 24� 24� 0.7 combination
upholstery
Ordering Information
Upholstery/COM information:
Prices shown include fabric upholstery
only. Contact your Knoll representative
for colors. Only approved KnollTextiles
may be ordered.
Customer’s Own Material is not
approved.
Note:
For pillows with combination upholstery,
list price is the highest of the two grades.
172
Construction
Fill:
Made from 50% bamboo fiber and 50%
recycled polyester.
Ticking:
Bamboo/cotton combination.

pattern no. A B C D E F G H I
KSP1-( ) $147. $154. $161. $168. $174. $178. $186. $200. $210.
KSP1S-( )-( ) 162. 169. 176. 183. 189. 193. 201. 215. 225.
KSP2-( ) 185. 192. 199. 206. 212. 216. 224. 238. 248.
KSP2S-( )-( ) 204. 211. 218. 225. 231. 235. 243. 257. 267.
KSP3-( ) 294. 308. 321. 336. 348. 357. 371. 399. 420.
KSP3S-( )-( ) 325. 339. 352. 367. 379. 388. 402. 430. 451.
Approved KnollTextiles Grades/Fabric
A
Alignment
Bocce
Cat’s Cradle
Common Ground
Dristi
Heavy Metal
Mariner
Metaphor
Monarch
Prep
Presto
Stacks
B
Abacus
Bank Shot
Belize
Betwixt
Chroma
Classic Boucle
Close Knit
Digit
Dovetail
Fairway
Field Day
Gusto CR
Knoll Felt
Knoll Hopsack
B continued
Mini Stitch
Nonchalant CR
Paradigm
Pogo
Pop
Ricochet
Spark
Spotlight
Starry Night
Triple Lace
Utmost
Zephyr
C
Biota
Charm
Circa
Cricket
Decade
Earthwork
Empire Stripe
Enmesh
Fable CR
Fibra
Fox Trot CR
Gala
Highline CR
173
C continued
Kaleidoscope
Kora CR
Lore CR
Metro
Moto CR
Panache CR
Parasol
Quark
Regard CR
Rio
Roundtrip
Sahara
Sandpiper
Star Struck
Stepping Stones
Swing
Transition
Treble CR
Vibe
Zari CR
D
Cavalier
Eclat Weave
Harrison
Hologram
Masquerade
Plain Linen
Satelite
Satin Chisel
Zoom
E
Cross Stitch
Kimono
Luberon
Madison
Mamba
Plus
Whip
F
Calais Cotton
Velvet
Century
Coco
Cornaro
Groove Line
Rivington
Topography
Una
G
Brugge
Garden City
Gibson
Hampshire
Haze
Lyon
Spencer
Ultrasuede
H
Arno
KnollStudio
I
Byron
Cato
Galloway
Gates
Jaipur
Knoll Velvet
Sandis
Stirling
Walker
Worth
Check with your KnollTextiles
Representative for changes or additions.

Designer(s):
Franco Albini, 1938
Order Code
Example: 80D-E
80D Albini desk
E Ebonized Oak pedestal
Specify:
1. Pattern number
2. Pedestal finish
Franco Albini
Albini Desk
description w d h weight
80D Pedestal desk 48� 26� 27 1 /2� 95 lbs.
Ordering Information
Albini pedestal finishes:
Ebonized Oak (suffix E)
White Lacquer (suffix L2)
20-Day:
The Albini desk in ebonized oak finish is
available on the KnollStudio 20-Day
program. For specific information consult
pages 29-32.
Maintenance:
See pages 27-28.
174
Construction
Base:
Frame and legs in square steel tube with
chrome finish.
Top:
1/2� clear tempered glass.
Pedestal:
2 drawer ‘‘floating’’ wood pedestal. Rear
open shelf for magazines or small books.
Pedestal dimensions:
16 1 /2�wx26�dx8 1 /4�h
Drawer dimensions:
14 1 /8�wx141 /8�dx21 /2�h
Rear shelf dimensions:
15 1 /2�wx81 /2� dx7�h
Drawer mounts only on the right side.

pattern no.
KnollStudio
80D-(E, L2) $5,027.
175

Designer(s):
Marcel Breuer, 1924
Order Code
Example: 50T1-F1
50T1 Laccio side table
F1 Black Laminate
Note:
Laccio tables are part of a collection.
Please refer to the Cesca and Wassily
chairs on pages 52 and 54.
Specify:
1. Pattern number
2. Top finish selection
Marcel Breuer
Laccio Tables
description w d h weight
50T1 Laccio side table 21 3 /4� 19� 17 3 /4� 13 lbs.
50T2 Laccio coffee table 53 1 /2� 19� 13 1 /2� 29 lbs.
Ordering Information
Top finishes:
Black (suffix F1)
Red (suffix F3)
White (suffix F2)
KnollStudio 20-Day Program:
Laccio tables in black and white
laminates are available on the 20-day
program. For specific information,
consult pages 29-32.
176
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Marcel Breuer is stamped into the base
of the table.
Construction
Top:
Satin finish, smooth plastic laminate.
Base:
Frame and legs seamless tubular steel in
polished chrome finish.

pattern no.
KnollStudio
50T1-( ) $736.
50T2-( ) 1,041.
177

Designer(s):
Joseph Paul D’Urso, 1980
Award(s):
Design Center Stuttgart Award, W.
Germany, 1983; Federal Award
for Industrial Design, W.
Germany, 1983
Order Code
Example: 6354L-C-111-C
6354 54� square table
L Low height
C Casters
111 Jet Black laminate
C Polished Chrome
Specify:
1. Pattern number
2. Specify L for low height tables
3. Glides/casters selection
4. Top finish selection
5. Leg finish selection
Joseph Paul D’Urso
Square Work and Low Tables
description
width
between
legs w d
h, work
tables
h, low
tables weight top
6348 Square table, medium 22 1 /2� 48� 48� 27 1 /2� 15 1 /4� 130 lbs. laminate
22 1 /2� 48� 48� 27 1 /2� 15 1 /4� 128 lbs. figured
techgrain ®
22 1 /2� 48� 48� 27 1 /2� 15 1 /4� 128 lbs. natural
veneer
22 1 /2� 48� 48� 27 1 /2� 15 1 /4� 197 lbs. natural
marble
22 1 /2� 48� 48� 27 1 /2� 15 1 /4� 197 lbs. coated
marble
6354 Square table, medium 25 3 /8� 54� 54� 27 1 /2� 15 1 /4� 145 lbs. laminate
25 3 /8� 54� 54� 27 1 /2� 15 1 /4� 141 lbs. figured
techgrain ®
25 3 /8� 54� 54� 27 1 /2� 15 1 /4� 141 lbs. natural
veneer
25 38� 54� 54� 27 1 /2� 15 1 /4� 241 lbs. natural
marble
25 3 /8� 54� 54� 27 1 /2� 15 1 /4� 241 lbs. coated
marble
25 3 /8� 54� 54� 27 1 /2� 15 1 /4� 281 lbs. granite
6360 Square table, large 25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 183 lbs. laminate
25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 179 lbs. figured
techgrain ®
GL Glides
C Casters
CX Locking casters
Ordering Information
Laminate top finishes:
Bright White (suffix 118)
Fog (suffix 128)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Figured Techgrain top finishes:
American Cherry (suffix P)
Cherry (suffix R)
Maple (suffix M)
Medium Red Mahogany (suffix C)
Natural veneer top finishes:
American Cherry (suffix X)
Maple (suffix K)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 179 lbs. natural
veneer
25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 288 lbs. natural
marble
25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 288 lbs. coated
marble
25 3 /8� 60� 60� 27 1 /2� 15 1 /4� 338 lbs. granite
178
Coated marble top finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Granite top finishes:
Black Andes: black (suffix GA)
Low Tables:
D’Urso tables are available in two
heights: standard and low. For low
tables, add an L after the parent pattern
number. Example: 6348L for low height
option.
Leg finishes:
Jet Black (suffix 111)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Red (suffix RD)
Glides/ casters:
Casters (suffix C)
Glides, standard option (suffix GL)
Locking casters (suffix CX)
KnollStudio 20-Day Program:
The D’Urso 6348 Work Table is available
on the KnollStudio 20-Day program with
black legs and glides. All laminates in
stock can be specified for top finishes.
For specific information, consult pages
29-32.
Maintenance:
See pages 27-28.
Note:
D’urso Tables with Laminate, Veneer or
Granite tops and PVC edge are
Greenguard certified.
Weight information above is based on
work height tables. For weight
information on low height tables, please
contact your KnollStudio representative.

pattern no. upcharge base painted base chrome
6348-( )-( )-( ) $2,185. $2,552.
6348-( )-( )-( ) 3,139. 3,506.
6348-( )-( )-( ) 3,680. 4,047.
6348-( )-(NGC, NGE)-( ) 5,125. 5,492.
6348-( )-(GC, GB, GE)-( ) 5,947. 6,314.
6354-( )-( )-( ) 2,267. 2,633.
6354-( )-( )-( ) 3,223. 3,590.
6354-( )-( )-( ) 3,806. 4,173.
6354-( )-(NGC, NGE)-( ) 6,014. 6,380.
6354-( )-(GC, GB, GE)-( ) 7,052. 7,418.
6354-( )-GA-( ) 8,071. 8,437.
6360-( )-( )-( ) 2,469. 2,835.
6360-( )-( )-( ) 3,639. 4,004.
6360-( )-( )-( ) 4,393. 4,759.
6360-( )-(NGC, NGE)-( ) 6,960. 7,326.
6360-( )-(GC, GB, GE)-( ) 8,232. 8,598.
6360-( )-GA-( ) 9,073. 9,439.
GL n/c
C [63xx] 527.
CX 601.
Construction
Top:
Laminate, Techgrain� and veneer or
stone surface. Laminate, Techgrain� and
veneer tops are 3-ply construction with
medium density fiberboard core and
plastic laminate backer (laminate tops)
or paper backer (wood veneer tops).
Laminate, Techgrain� and veneer tops
have a black vinyl bullnose edge. Wood
tops are longitudinal veneered. 3 /4� thick
stone tops have an integral, hand-crafted
bullnose edge.
Edge detail:
Laminate/Techgrain/wood tops:
Stone tops:
Base:
Racetrack-shaped steel legs with painted
or polished chrome finish.
179
Glides:
Black nylon.
Casters:
3� single, black hard-rubber wheel.
Polished chrome wheel housings with
black or medium metallic grey legs.
Black housings with polished chrome
and red leg. Locking caster housings
always polished chrome. Tables with
casters are at the same height as tables
with glides.
Wood tables with casters are weighted
with steel plates to ensure stability.
Plates are painted and secured under
table top.
Please note: Casters cannot be retrofitted
to tables with glides.
KnollStudio

Designer(s):
Joseph Paul D’Urso, 1980
Award(s):
Design Center Stuttgart Award, W.
Germany, 1983; Federal Award
for Industrial Design, W.
Germany, 1983
Order Code
Example: 6248-C-NGE-C
6248 48� diameter round table
C Casters
NGE Emperador Dark Marble
C Polished Chrome
Specify:
1. Pattern number
2. Specify L for low height tables
3. Glides/casters selection
4. Top finish selection
5. Leg finish selection
Joseph Paul D’Urso
Round Work and Low Tables
description
width
between legs w h, work tables h, low tables weight top
6242 Round table, small 20 3 /8� 42� 27 1 /2� 15 1 /4� 110 lbs. laminate
20 3 /8� 42� 27 1 /2� 15 1 /4� 109 lbs. figured
techgrain ®
20 3 /8� 42� 27 1 /2� 15 1 /4� 109 lbs. natural
veneer
20 3 /8� 42� 27 1 /2� 15 1 /4� 132 lbs. natural
marble
20 3 /8� 42� 27 1 /2� 15 1 /4� 132 lbs. coated marble
6248 Round table, medium 22 1 /2� 48� 27 1 /2� 15 1 /4� 120 lbs. laminate
22 1 /2� 48� 27 1 /2� 15 1 /4� 118 lbs. figured
techgrain ®
22 1 /2� 48� 27 1 /2� 15 1 /4� 118 lbs. natural
veneer
22 1 /2� 48� 27 1 /2� 15 1 /4� 162 lbs. natural
marble
22 1 /2� 48� 27 1 /2� 15 1 /4� 162 lbs. coated marble
6254 Round table, medium 25 3 /8� 54� 27 1 /2� 15 1 /4� 156 lbs. laminate
25 3 /8� 54� 27 1 /2� 15 1 /4� 153 lbs. figured
techgrain ®
Ordering Information
Laminate top finishes:
Bright White (suffix 118)
Fog (suffix 128)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Figured Techgrain top finishes:
American Cherry (suffix P)
Cherry (suffix R)
Maple (suffix M)
Medium Red Mahogany (suffix C)
25 3 /8� 54� 27 1 /2� 15 1 /4� 153 lbs. natural
veneer
25 3 /8� 54� 27 1 /2� 15 1 /4� 197 lbs. natural
marble
25 3 /8� 54� 27 1 /2� 15 1 /4� 197 lbs. coated marble
25 3 /8� 54� 27 1 /2� 15 1 /4� 229 lbs. granite
180
Natural veneer top finishes:
American Cherry (suffix X)
Maple (suffix K)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Coated marble top finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Granite top finishes
Black Andes: black (suffix GA)
Leg finishes:
Jet Black (suffix 111)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Red (suffix RD)
Glides/casters:
Casters (suffix C)
Glides, standard option (suffix GL)
Locking casters (suffix CX)
Low Tables:
D’Urso tables are available in two
heights: standard and low. For low
tables, add an L after the parent pattern
number. Example: 6348L for low height
option.

pattern no. base painted base chrome
6242-( )-( )-( ) $2,066. $2,430.
6242-( )-( )-( ) 3,055. 3,418.
6242-( )-( )-( ) 3,597. 3,961.
6242-( )-(NGC, NGE)-( ) 3,731. 4,095.
6242-( )-(GC, GB, GE)-( ) 4,227. 4,591.
6248-( )-( )-( ) 2,185. 2,552.
6248-( )-( )-( ) 3,139. 3,506.
6248-( )-( )-( ) 3,680. 4,047.
6248-( )-(NGC, NGE)-( ) 4,393. 4,757.
6248-( )-(GC, GB, GE)-( ) 5,042. 5,406.
6254-( )-( )-( ) 2,267. 2,633.
6254-( )-( )-( ) 3,223. 3,590.
6254-( )-( )-( ) 3,806. 4,173.
6254-( )-(NGC, NGE)-( ) 5,148. 5,514.
6254-( )-(GC, GB, GE)-( ) 5,970. 6,336.
6254-( )-GA-( ) 8,246. 8,612.
KnollStudio 20-Day Program:
The 6242 D’Urso Work Table with black
legs and glides is available on the
KnollStudio 20-Day program. All
laminates in stock can be specified for
the top finish. For specific information,
consult pages 29-32.
Maintenance:
See pages 27-28.
Note:
The D’urso Tables with
Laminate, Veneer or Granite tops and
PVC edge are Greenguard certified.
Weight information above is based on
work height tables. For weight
information on low height tables, please
contact your KnollStudio representative.
Construction
Top:
Laminate, Techgrain� and veneer or
stone surface. Laminate, Techgrain� and
veneer tops are 3-ply construction with
medium density fiberboard core and
plastic laminate backer (laminate tops)
or paper backer (wood veneer tops).
Laminate, Techgrain� and veneer tops
have a black vinyl bullnose edge. 3 /4�
thick stone tops have an integral,
hand-crafted bullnose edge.
Edge detail:
Laminate/Techgrain/wood tops
Stone tops:
181
Base:
Racetrack-shaped steel legs with painted
or polished chrome finish.
Glides:
Black nylon.
Casters:
3� single, black hard-rubber wheel.
Polished chrome wheel housings with
black or medium metallic grey legs.
Black housings with polished chrome
and red leg. Locking caster housings
always polished chrome.
Wood tables with casters are weighted
with steel plates to ensure stability.
Plates are painted and secured under
table top.
Please note: Casters cannot be retrofitted
to tables with glides.
KnollStudio

Designer(s):
Joseph Paul D’Urso, 1980
Award(s):
Design Center Stuttgart Award, W.
Germany, 1983; Federal Award
for Industrial Design, W.
Germany, 1983
Order Code
Example: 6248-C-NGE-C
6248 48� diameter round table
C Casters
NGE Emperador Dark Marble
C Polished Chrome
Specify:
1. Pattern number
2. Specify L for low height tables
3. Glides/casters selection
4. Top finish selection
5. Leg finish selection
Joseph Paul D’Urso
Round Work and Low Tables
description
width
between legs w h, work tables h, low tables weight top
6260 Round table, large 25 3 /8� 60� 27 1 /2� 15 1 /4� 167 lbs. laminate
25 3 /8� 60� 27 1 /2� 15 1 /4� 164 lbs. figured
techgrain ®
25 3 /8� 60� 27 1 /2� 15 1 /4� 164 lbs. natural
veneer
25 3 /8� 60� 27 1 /2� 15 1 /4� 235 lbs. natural
marble
25 3 /8� 60� 27 1 /2� 15 1 /4� 235 lbs. coated marble
25 3 /8� 60� 27 1 /2� 15 1 /4� 274 lbs. granite
6272 Round table, large 31� 72� 27 1 /2� 15 1 /4� 255 lbs. Natural
veneer
C Casters
GL Glides
CX Locking casters
Ordering Information
Laminate top finishes:
Bright White (suffix 118)
Fog (suffix 128)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Figured Techgrain top finishes:
American Cherry (suffix P)
Cherry (suffix R)
Maple (suffix M)
Medium Red Mahogany (suffix C)
182
Natural veneer top finishes:
American Cherry (suffix X)
Maple (suffix K)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Coated marble top finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Granite top finishes
Black Andes: black (suffix GA)
Leg finishes:
Jet Black (suffix 111)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Red (suffix RD)
Glides/casters:
Casters (suffix C)
Glides, standard option (suffix GL)
Locking casters (suffix CX)
Low Tables:
D’Urso tables are available in two
heights: standard and low. For low
tables, add an L after the parent pattern
number. Example: 6348L for low height
option.

pattern no. base painted base chrome
6260-( )-( )-( ) $2,469. $2,835.
6260-( )-( )-( ) 3,639. 4,004.
6260-( )-( )-( ) 4,393. 4,759.
6260-( )-(NGC, NGE)-( ) 5,871. 6,237.
6260-( )-(GC, GB, GE)-( ) 6,870. 7,236.
6260-( )-GA-( ) 9,032. 9,398.
6272-( )-( )-( ) 5,228. 5,647.
C [62xx]
GL
CX
KnollStudio 20-Day Program:
The 6242 D’Urso Work Table with black
legs and glides is available on the
KnollStudio 20-Day program. All
laminates in stock can be specified for
the top finish. For specific information,
consult pages 29-32.
Maintenance:
See pages 27-28.
Note:
The D’urso Tables with
Laminate, Veneer or Granite tops and
PVC edge are Greenguard certified.
Weight information above is based on
work height tables. For weight
information on low height tables, please
contact your KnollStudio representative.
Construction
Top:
Laminate, Techgrain� and veneer or
stone surface. Laminate, Techgrain� and
veneer tops are 3-ply construction with
medium density fiberboard core and
plastic laminate backer (laminate tops)
or paper backer (wood veneer tops).
Laminate, Techgrain� and veneer tops
have a black vinyl bullnose edge. 3 /4�
thick stone tops have an integral,
hand-crafted bullnose edge.
Edge detail:
Laminate/Techgrain/wood tops
Stone tops:
183
Base:
Racetrack-shaped steel legs with painted
or polished chrome finish.
Glides:
Black nylon.
Casters:
3� single, black hard-rubber wheel.
Polished chrome wheel housings with
black or medium metallic grey legs.
Black housings with polished chrome
and red leg. Locking caster housings
always polished chrome.
Wood tables with casters are weighted
with steel plates to ensure stability.
Plates are painted and secured under
table top.
Please note: Casters cannot be retrofitted
to tables with glides.
KnollStudio

Designer(s):
Joseph Paul D’Urso, 1980
Award(s):
Design Center Stuttgart Award, W.
Germany, 1983; Federal Award
for Industrial Design, W.
Germany, 1983
Order Code
Example: 6472-GL-GA-C
6472 72� x36�racetrack table
GL Glides
GA Granite
C Polished Chrome
Specify:
1. Pattern number
2. Specify L for low height tables
3. Glides/casters selection
4. Top finish selection
5. Leg finish selection
Joseph Paul D’Urso
Racetrack Work Tables
description
w between
legs
d between
legs w d h weight top
6472 Racetrack table, small 32 3 /4� 20 3 /8� 72� 36� 27 1 /2� 144 lbs. laminate
32 3 /4� 20 3 /8� 72� 36� 27 1 /2� 141 lbs. figured
techgrain ®
32 3 /4� 20 3 /8� 72� 36� 27 1 /2� 141 lbs. natural
veneer
32 1 /4� 20 3 /8� 72� 36� 27 1 /2� 200 lbs. natural
marble
32 3 /4� 20 3 /8� 72� 36� 27 1 /2� 200 lbs. coated
marble
32 3 /4� 20 3 /8� 72� 36� 27 1 /2� 232 lbs. granite
6484 Racetrack table, medium 38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 162 lbs. laminate
38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 159 lbs. figured
techgrain ®
38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 159 lbs. natural
veneer
38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 294 lbs. natural
marble
38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 294 lbs. coated
marble
38 3 /4� 20 3 /8� 84� 42� 27 1 /2� 338 lbs. granite
6496 Racetrack table, large 44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 177 lbs. laminate
44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 173 lbs. figured
techgrain ®
GL Glides
C Casters
CX Locking casters
Ordering Information
Laminate top finishes:
Bright White (suffix 118)
Fog (suffix 128)
Jet Black (suffix111)
Light Grey (suffix L)
Pumice (suffix 119)
Figured Techgrain top finishes:
American Cherry (suffix P)
Cherry (suffix R)
Maple (suffix M)
Medium Red Mahogany (suffix C)
Natural veneer top finishes:
American Cherry (suffix X)
Maple (suffix K)
44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 173 lbs. natural
veneer
44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 377 lbs. natural
marble
44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 377 lbs. coated
marble
44 3 /4� 22 1 /2� 96� 48� 27 1 /2� 434 lbs. granite
184
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Coated marble top finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Granite top finish:
Black Andes: black (suffix GA)
Leg finishes:
Jet Black (suffix 111)
Medium Metallic Grey (suffix 612)
Polished Chrome (suffix C)
Red (suffix RD)
Glides/casters:
Casters (suffix C)
Glides, standard option (suffix GL)
Locking casters (suffix CX)
Casters not available on stone racetrack
tables.
KnollStudio 20-Day Program:
The 6472 D’Urso Table with black legs
and glides is available on the
KnollStudio 20-Day program. All
laminates in stock can be specified for
top finish. For specific information,
consult pages 29-32.

pattern no. upcharge base painted base chrome
6472-( )-( )-( ) $2,793. $3,158.
6472-( )-( )-( ) 3,918. 4,282.
6472-( )-( )-( ) 4,489. 4,854.
6472-( )-(NGC, NGE)-( ) 5,596. 5,961.
6472-( )-(GC, GB, GE)-( ) 6,513. 6,878.
6472-( )-GA-( ) 9,071. 9,436.
6484-( )-( )-( ) 2,997. 3,362.
6484-( )-( )-( ) 4,154. 4,519.
6484-( )-( )-( ) 5,015. 5,380.
6484-( )-(NGC, NGE)-( ) 7,540. 7,905.
6484-( )-(GC, GB, GE)-( ) 8,762. 9,127.
6484-( )-GA-( ) 10,483. 10,848.
6496-( )-( )-( ) 3,079. 3,442.
6496-( )-( )-( ) 4,393. 4,757.
6496-( )-( )-( ) 5,491. 5,855.
6496-( )-(NGC, NGE)-( ) 9,458. 9,821.
6496-( )-(GC, GB, GE)-( ) 11,114. 11,477.
6496-( )-GA-( ) 12,604. 12,967.
GL n/c
C [63xx] 527.
CX 601.
Maintenance:
See pages 27-28.
Note:
The D’urso Tables with
Laminate, Veneer or Granite tops and
PVC edge are Greenguard certified.
Weight information above is based on
work height tables. For weight
information on low height tables, please
contact your KnollStudio representative.
Construction
Top:
Laminate, Techgrain� and veneer or
stone surface. Laminate, Techgrain� and
veneer tops are 3-ply construction with
medium density fiberboard core and
plastic laminate backer (laminate tops)
or paper backer (wood veneer tops).
Laminate, Techgrain� and veneer tops
have a black vinyl bullnose edge. Wood
tops are longitudinal veneered. 3 /4� thick
stone tops have an integral, hand-crafted
bullnose edge.
185
Edge detail:
Laminate/Techgrain/wood tops:
Stone tops:
KnollStudio
Base:
Racetrack-shaped steel legs with painted
or polished chrome finish.
Glides:
Black nylon.
Casters:
3� single, black hard-rubber wheel.
Polished chrome wheel housings with
black or medium metallic grey legs.
Black housings with polished chrome
and red leg. Locking caster housings
always polished chrome. Not available on
stone racetrack tables.
Wood tables with casters are weighted
with steel plates to ensure stability.
Plates are painted and secured under
table top.
Please note: Casters cannot be retrofitted
to tables with glides.

Designer(s):
Frank Gehry, 1990
Order Code
Example: 95T-36-G2-GC
95T-36 36� Face Off table
G2 Clear Glass
GC Clear Maple
Note:
The Gehry tables are part of a collection.
Please refer to Gehry side chairs and
lounge seating starting on page 72.
Specify:
1. Pattern number
2. Top finish selection
Frank Gehry
Face Off Cafe Table
description w d h weight top base
95T-36 Face Off 36� café table 36� 28 3 /4� 10 lbs. glass clear maple
36� 28 3 /4� 10 lbs. white
laminate
clear maple
95T-40 Face Off 40� café table 40� 28 3 /4� 10 lbs. glass clear maple
Ordering Information
Glass top finish:
Clear Glass (suffix G2)
Laminate top finish :
White (suffix W)
Maple Base finish:
Clear (suffix GC)
Shipping note:
Tops ship separately.
40� 28 3 /4� 10 lbs. white
laminate
186
Signature:
The underside of each piece in the Gehry
Collection is embossed with Frank
Gehry’s signature and the Knoll logo.
Maintenance:
See pages 27-28.
clear maple
Construction
Face Off Cafe Table tops:
1 /2� thick tempered clear glass with
polished edge; 5 /8� thick textured laminate
top with clear solid edgeband. Four bolts
attach table top to base.
Face Off Cafe Table base:
Constructed of hard white maple veneers
in 2� wide, 1 /34� thick strips. Laminated to
7-ply thickness with high-bonding urea
glue. All wood grains run in the same
direction for resilience. State-of-the-art
thermoset assembly glue provides
structural rigidity without the need for
metal connectors. Solid maple center
column prevents cracking. Arched base
design allows ample leg room.
Glides:
Clear plastic with a matte frost finish.

pattern no.
KnollStudio
95T-36-G2-GC $3,783.
95T-36-W-GC 4,484.
95T-40-G2-GC 4,551.
95T-40-W-GC 5,248.
187

Designer(s):
Alexander Girard, 1948
Order Code
Example: 108-LWA-111
108 Girard Table
LWA Light Walnut
111 Jet Black
Specify:
1. Pattern number
2. Top finish delection
3. Leg finish selection
Alexander Girard
Girard Table
description w d h weight
108 Girard Table 59� 26� 16� 23 lbs.
59� 26� 16� 23 lbs.
Ordering Information
Top Finishes:
Ebonized Walnut (suffix D)
Light Walnut (suffix LWA)
Maple (suffix K)
Medium Cherry (suffix V319)
Leg Finish:
Jet Black (suffix 111)
188
Construction
Top:
Top is 3 /4� baltic birch core with either
plain slice bookmatch maple, cherry or
ebonized veneer. Top has a 45° beveled
edge.
Legs:
Cold-roll steel tubes with metal
weldment in black powder coat.
Maintenance:
See pages 27-28.

pattern no.
KnollStudio
108-(LWA, D, V319)-111 $1,270.
108-KC-111 1,623.
189

Designer(s):
Florence Knoll, 1961
Award(s):
Design Center Stuttgart Award,
1969-70
Order Code
Example: 2480D-CO-MC
2480D Florence Knoll oval table
desk
CO Satin Chrome
MC Calacatta Marble
Note:
Florence Knoll table desks are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and
credenzas, conference and low tables on
the following pages.
Specify:
1. Pattern number
2. Base finish option
3. Top finish selection
Florence Knoll
Oval Table Desks
description w d h weight top
2480D Oval table desk 78� 47 3 /4� 27 1 /2� 313 lbs. natural marble
78� 47 3 /4� 28� 185 lbs. white laminate
78� 47 3 /4� 28� 174 lbs. natural oak
78� 47 3 /4� 27 1 /2� 313 lbs. coated marble
78� 47 3 /4� 28� 174 lbs. mahogany
78� 47 3 /4� 28� 174 lbs. ebonized oak
78� 47 3 /4� 27 1 /2� 313 lbs. coated marble
78� 47 3 /4� 28� 174 lbs. pearwood
78� 47 3 /4� 27 1 /2� 313 lbs. coated marble
78� 47 3 /4� 27 1 /2� 313 lbs. coated marble
78� 47 3 /4� 27 1 /2� 313 lbs. coated marble
2481D Oval table desk 96� 54� 27 1 /2� 402 lbs. natural marble
96� 54� 28� 223 lbs. white laminate
96� 54� 27 1 /2� 402 lbs. coated marble
96� 54� 28� 207 lbs. natural oak
96� 54� 28� 207 lbs. mahogany
96� 54� 28� 207 lbs. ebonized oak
96� 54� 28� 207 lbs. pearwood
96� 54� 27 1 /2� 402 lbs. coated marble
96� 54� 27 1 /2� 402 lbs. coated marble
96� 54� 27 1 /2� 402 lbs. coated marble
96� 54� 27 1 /2� 402 lbs. coated marble
Ordering Information
Laminate top finish:
White Laminate (suffix F2)
Veneer top finishes:
Ebonized Oak (suffix E)
Natural Oak (suffix O)
Medium Brown Mahogany (suffix M7)
Medium Red Mahogany (suffix M9)
Pearwood (suffix P)
190
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Empire Beige: beige (suffix GB)
Emperador Dark: dark brown (suffix GE)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Florence Knoll are stamped into the base
of the table.
The Florence Knoll Oval Table Desk is
Greenguard certified.

pattern no. polished chrome base (C) satin chrome base (CO)
2480D-( )-(NGC, NGE) $7,688. $8,026.
2480D-( )-F2 7,851. 8,189.
2480D-( )-O 8,709. 9,047.
2480D-( )-(GC, GE, GB) 8,828. 9,166.
2480D-( )-(M7, M9) 9,097. 9,434.
2480D-( )-E 9,479. 9,817.
2480D-( )-(MN, MA) 10,222. 10,560.
2480D-( )-P 10,430. 10,768.
2480D-( )-(MC) 10,836. 11,173.
2480D-( )-(MV) 13,296. 13,633.
2480D-( )-(MW) 15,955. 16,293.
2481D-( )-(NGC, NGE) 9,318. 9,653.
2481D-( )-F2 10,836. 11,171.
2481D-( )-(GC, GE, GB) 10,905. 11,240.
2481D-( )-O 11,871. 12,207.
2481D-( )-(M7,M9) 12,255. 12,590.
2481D-( )-E 12,641. 12,977.
2481D-( )-P 13,908. 14,243.
2481D-( )-(MN, MA) 14,079. 14,415.
2481D-( )-(MC) 14,924. 15,259.
2481D-( )-(MV) 18,257. 18,593.
2481D-( )-(MW) 21,908. 22,244.
Construction
Base:
Frame and legs heavy gauge welded
steel. Post and four-star legs in polished
chrome finish. Optional satin chrome
finish. 78� and 96� tables use the same
base.
Top:
Satin finish smooth laminate, wood
veneer, or marble with bevel-edge.
Laminate tops are 1 1 /4� thick and veneer
tops are 1 3 /16� thick. Marble is 3 /4� thick.
Marble coated with transparent polyester
to help eliminate use-associated stains.
Glides:
Adjustable steel glides with a chrome
finish.
Note:
Polyester marble coating will yellow over
time.
Laminate edge detail:
Marble edge detail:
191
KnollStudio

Designer(s):
Florence Knoll, 1961
Award(s):
Design Center Stuttgart Award,
1969-70
Order Code
Example: 2482T-C-NGC
2482T Florence Knoll round table
desk
C Polished Chrome
NGC Carrara Marble
Note:
Florence Knoll table desks are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and
credenzas, conference and low tables on
the following pages.
Specify:
1. Pattern number
2. Base finish option
3. Top finish selection
Florence Knoll
Round Table Desk
description w d h weight top
2482T Round table desk 54� 28� 142 lbs. white laminate
54� 27 1 /2� 241 lbs. natural marble
54� 27 1 /2� 241 lbs. coated marble
54� 28� 134 lbs. natural oak
54� 28� 134 lbs. mahogany
54� 28� 134 lbs. ebonized oak
54� 27 1 /2� 241 lbs. coated marble
54� 28� 134 lbs. pearwood
54� 27 1 /2� 241 lbs. coated marble
54� 27 1 /2� 241 lbs. coated marble
54� 27 1 /2� 241 lbs. coated marble
Ordering Information
Laminate top finish:
White Laminate (suffix F2)
Veneer top finishes:
Ebonized Oak (suffix E)
Natural Oak (suffix O)
Medium Brown Mahogany (suffix M7)
Medium Red Mahogany (suffix M9)
Pearwood (suffix P)
192
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Empire Beige: beige (suffix GB)
Emperador Dark: dark brown (suffix GE)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Florence Knoll are stamped into the base
of the table.
The Florence Knoll Round Table Desk is
Greenguard certified.

pattern no. polished chrome base (C) satin chrome base (CO)
2482T-( )-F2 $6,256. $6,641.
2482T-( )-(NGC, NGE) 6,812. 7,197.
2482T-( )-(GC, GE, GB) 7,627. 8,012.
2482T-( )-O 8,548. 8,933.
2482T-( )-(M7,M9) 8,912. 9,297.
2482T-( )-E 9,278. 9,663.
2482T-( )-(MN, MA) 10,160. 10,545.
2482T-( )-P 10,207. 10,592.
2482T-( )-(MC) 10,668. 11,053.
2482T-( )-(MV) 13,224. 13,609.
2482T-( )-(MW) 15,869. 16,254.
Construction
Base:
Frame and legs heavy gauge welded
steel. Post and four-star legs in polished
chrome finish. Optional satin chrome
finish.
Top:
Satin finish smooth laminate, wood
veneer, or marble with bevel-edge.
Laminate tops are 1 1 /4� thick and veneer
tops are 1 3 /16� thick. Marble is 3 /4� thick.
Marble coated with transparent polyester
to help eliminate use-associated stains.
Glides:
Adjustable steel glides with a chrome
finish.
Note:
Polyester marble coating will yellow over
time.
Laminate edge detail:
Marble edge detail:
193
KnollStudio

Designer(s):
Florence Knoll, 1961
Order Code
Example: 2545M-C-M9-M9
2545M Florence Knoll credenza,
two position
C Polished Chrome
M9 Medium Red Mahogany
body
M9 Medium Red Mahogany top
2545x Optional central locking
system
Florence Knoll credenzas are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and table
desks, conference and low tables on
beginning on page 190.
Florence Knoll
Credenzas
Two Position Credenzas
description w d h body
2541M Six box drawers (each with one
removable partition)
2542M Four box drawers (each with one
removable partition), one full extension file
drawer with two metal bars for hanging files
2545M Two storage cabinets with two
adjustable shelves for use in one or both
cabinets
A B
2546M Two box drawers (each with one
removable partition), two full extension file
drawers with two metal bars for hanging files
Ordering Information
Specify:
1. Pattern number
2. Base finish option
3. Body veneer selection
4. Top marble or wood selection
5. Optional central locking system
(upcharge $310)
Body and top veneers/lacquer:
Ebonized Oak (suffix E)
Medium Brown Mahogany (suffix M7)
Medium Red Mahogany (suffix M9)
Natural Oak (suffix O)
Pearwood (suffix P)
White Lacquer (on 2545M only: suffix 2)
37 1 /2� 18� 25 1 /2� natural oak
37 1 /2� 18� 25 1 /2� mahogany
37 1 /2� 18� 25 1 /2� ebonized oak
37 1 /2� 18� 25 1 /2� pearwood
37 1 /2� 18� 25 1 /2� natural oak
37 1 /2� 18� 25 1 /2� mahogany
37 1 /2� 18� 25 1 /2� ebonized oak
37 1 /2� 18� 25 1 /2� pearwood
37 1 /2� 18� 25 1 /2� white lacquer
37 1 /2� 18� 25 1 /2� natural oak
37 1 /2� 18� 25 1 /2� mahogany
37 1 /2� 18� 25 1 /2� ebonized oak
37 1 /2� 18� 25 1 /2� pearwood
37 1 /2� 18� 25 1 /2� natural oak
37 1 /2� 18� 25 1 /2� mahogany
37 1 /2� 18� 25 1 /2� ebonized oak
37 1 /2� 18� 25 1 /2� pearwood
194
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Empire Beige: beige (suffix GB)
Emperador Dark: dark brown (suffix GE)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Central locking:
Optional central locking secures drawers
and doors instantly with one single key
lock located in credenza top (left front
side). Add proper lock suffix to item
number at an additional cost of $310.
See chart for ordering information.
Credenza
pattern
no.
2541M 2541X
2542M 2542X
2545M 2545X
2546M 2546X
Locking system pattern
no.
Note:
KnollStudio logo and Florence Knoll’s
signature are stamped on each piece.
For weight information, please contact
your KnollStudio representative.
Maintenance:
See pages 27-28.

pattern no.
wood top/
polished base
(MN, MA, MC,
MV, MW)
marble top/
polished base
(GC, GE, GB)
marble top/
polished base
(NGC,NGE)
marble top/
polished base
wood top/
satin base
(MN, MA, MC,
MV, MW)
marble top/
satin base
(GC, GE, GB)
marble top/
satin base
(NGC, NGE)
marble top/
satin base
2541M-( )-O-( )-( ) $8,530. $9,276. $9,276. $9,080. $8,652. $9,398. $9,398. $9,202.
2541M-( )-(M7, M9)-( )-( ) 9,048. 9,817. 9,817. 9,611. 9,169. 9,939. 9,939. 9,733.
2541M-( )-E-( )-( ) 9,600. 10,251. 10,251. 10,039. 9,722. 10,373. 10,373. 10,161.
2541M-( )-P-( )-( ) 11,276. 11,276. 11,276. 11,060. 11,397. 11,398. 11,398. 11,182.
2542M-( )-O-( )-( ) 8,229. 8,951. 8,951. 8,753. 8,349. 9,071. 9,071. 8,873.
2542M-( )-(M7, M9)-( )-( ) 8,625. 9,382. 9,382. 9,176. 8,745. 9,502. 9,502. 9,296.
2542M-( )-E-( )-( ) 9,079. 9,817. 9,817. 9,604. 9,198. 9,937. 9,937. 9,724.
2542M-( )-P-( )-( ) 10,798. 10,798. 10,798. 10,589. 10,917. 10,918. 10,918. 10,709.
2545M-( )-2-( )-( ) n/a 7,333. 7,333. 7,084. n/a 7,455. 7,455. 7,206.
2545M-( )-O-( )-( ) 5,410. 6,036. 6,036. 5,868. 5,532. 6,158. 6,158. 5,990.
2545M-( )-(M7, M9)-( )-( ) 5,812. 6,472. 6,472. 6,293. 5,935. 6,594. 6,594. 6,415.
2545M-( )-E-( )-( ) 6,241. 6,900. 6,900. 6,713. 6,363. 7,022. 7,022. 6,835.
2545M-( )-P-( )-( ) 7,590. 7,590. 7,590. 7,419. 7,712. 7,712. 7,712. 7,541.
2546M-( )-O-( )-( ) 8,078. 8,789. 8,789. 8,587. 8,197. 8,988. 8,988. 8,786.
2546M-( )-(M7, M9)-( )-( ) 8,421. 9,168. 9,168. 8,957. 8,540. 9,367. 9,367. 9,156.
2546M-( )-E-( )-( ) 8,820. 9,600. 9,600. 9,384. 8,939. 9,799. 9,799. 9,583.
2546M-( )-P-( )-( ) 10,562. 10,562. 10,562. 10,350. 10,681. 10,761. 10,761. 10,549.
Construction
Base:
Welded square steel tube in polished
chrome finish. Optional satin chrome
finish. Adjustable glides.
Body:
Wood veneer sides and matching back
panel in oak, pearwood, or mahogany.
Oak, mahogany and pearwood finished
with transparent polyurethane coat. Only
2545M storage cabinet available in white
lacquer.
Top :
3/4� thick marble coated with
transparent polyester to help eliminate
use-associated stains. Squared edge
detail. 3 /4� wood top matching body
available. Wood tops finished with
transparent polyurethane coat.
Note:
Marbles with polyester coating will
yellow over time.
195
Front:
Drawer and door fronts in same wood
veneers or lacquer finish as body. All
have polished aluminum pulls, top flush
mounted storage doors with magnetic
closures. Location A storage hinges open
from left. Location B storage hinges open
from right. Other hinging available as
special. Pull out drawers with
smooth-glide extension slides. Drawer
and storage have matching veneer inside.
KnollStudio

Designer(s):
Florence Knoll, 1961
Order Code
Example: 2543M-CO-P-MN
2543M Florence Knoll credenza,
four position
CO Satin Chrome
P Pearwood body
MN Nero Marquina top
2543x Optional locking system
Florence Knoll credenzas are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and table
desks, conference and low tables
beginning on page 190.
Florence Knoll
Credenzas
Four Position Credenzas
description w d h body
2543M Eight box drawers (each with one
removable partition), two full-extension file
drawers with two metal bars each for hanging
files
2544M Four storage cabinets with four
adjustable shelves for use in two or more of
the cabinets
A B C D
2547M Four box drawers (each with one
removable partition), one full-extension file
drawer with two metal bars for hanging files.
Two storage cabinets with two adjustable
shelves for use in one or both cabinets
A B
2548M Four box drawers (each with one
removable partition), one full-extension file
drawer with two metal bars, two storage
cabinets with two adjustable shelves for use
in one or both cabinets
A B
2549M Four box drawers (each with one
removable partition), four full-extension file
drawers with two metal bars each for hanging
files
Ordering Information
Specify:
1. Pattern number
2. Base finish option
3. Body veneer selection
4. Top marble or wood selection
5. Optional central locking system
(upcharge $620)
Body and top veneers/lacquer:
Ebonized Oak (suffix E)
Medium Brown Mahogany (suffix M7)
Medium Red Mahogany (suffix M9)
Natural Oak (suffix O)
Pearwood (suffix P)
White Lacquer (on 2544M only: suffix 2)
74 3 /4� 18� 25 1 /2� natural oak
74 3 /4� 18� 25 1 /2� mahogany
74 3 /4� 18� 25 1 /2� ebonized oak
74 3 /4� 18� 25 1 /2� pearwood
74 3 /4� 18� 25 1 /2� white lacquer
74 3 /4� 18� 25 1 /2� natural oak
74 3 /4� 18� 25 1 /2� mahogany
74 3 /4� 18� 25 1 /2� ebonized oak
74 3 /4� 18� 25 1 /2� pearwood
74 3 /4� 18� 25 1 /2� natural oak
74 3 /4� 18� 25 1 /2� mahogany
74 3 /4� 18� 25 1 /2� ebonized oak
74 3 /4� 18� 25 1 /2� pearwood
74 3 /4� 18� 25 1 /2� natural oak
74 3 /4� 18� 25 1 /2� mahogany
74 3 /4� 18� 25 1 /2� ebonized oak
74 3 /4� 18� 25 1 /2� pearwood
74 3 /4� 18� 25 1 /2� natural oak
74 3 /4� 18� 25 1 /2� mahogany
74 3 /4� 18� 25 1 /2� ebonized oak
74 3 /4� 18� 25 1 /2� pearwood
196
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Empire Beige: beige (suffix GB)
Emperador Dark: dark brown (suffix GE)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Central locking:
Optional central locking secures drawers
and doors instantly with one single key
lock located in credenza top (left front
side). Add proper lock suffix to item
number at an additional cost of $620.
See chart below for ordering information.
Credenza
pattern
no.
2453M 2543X
2544M 2544X
2547M 2547X
2548M 2548X
2549M 2549X
Central locking system
pattern no.
Note:
KnollStudio logo and Florence Knoll’s
signature are stamped on each piece.
For weight information, please contact
your KnollStudio representative.
Maintenance:
See pages 27-28.

pattern no.
wood top/
polished base
(MN, MA, MC,
MV,MW)
marble top/
polished base
(GC, GE, GB)
marble top/
polished base
(NGC, NGE)
marble top/
polished base
wood top/
satin base
(MN, MA, MC,
MV, MW)
marble top/
satin base
(GC, GE, GB)
marble top/
satin base
(NGC, NGE)
marble top/
satin base
2543M-( )-O-( )-( ) $16,403. $17,913. $17,913. $17,506. $16,603. $18,113. $18,113. $17,706.
2543M-( )-(M7,M9)-( )-( ) 17,429. 18,887. 18,887. 18,459. 17,628. 19,087. 19,087. 18,659.
2543M-( )-E-( )-( ) 18,335. 19,859. 19,859. 19,415. 18,534. 20,059. 20,059. 19,615.
2543M-( )-P-( )-( ) 21,845. 21,845. 21,845. 21,409. 22,044. 22,045. 22,045. 21,609.
2544M-( )-2-( )-( ) n/a 14,602. 14,602. 14,078. n/a 14,803. 14,803. 14,279.
2544M-( )-O-( )-( ) 10,700. 11,977. 11,977. 11,628. 10,901. 12,178. 12,178. 11,829.
2544M-( )-(M7,M9)-( )-( ) 11,392. 12,624. 12,624. 12,260. 11,593. 12,825. 12,825. 12,461.
2544M-( )-E-( )-( ) 11,985. 13,273. 13,273. 12,899. 12,187. 13,474. 13,474. 13,100.
2544M-( )-P-( )-( ) 14,602. 14,568. 14,568. 14,229. 14,803. 14,769. 14,769. 14,430.
2547M-( )-O-( )-( ) 13,552. 14,957. 14,957. 14,575. 13,751. 15,156. 15,156. 14,774.
2547M-( )-(M7,M9)-( )-( ) 14,359. 15,714. 15,714. 15,318. 14,559. 15,913. 15,913. 15,517.
2547M-( )-E-( )-( ) 15,063. 16,465. 16,465. 16,055. 15,262. 16,664. 16,664. 16,254.
2547M-( )-P-( )-( ) 18,118. 18,118. 18,118. 17,732. 18,318. 18,317. 18,317. 17,931.
2548M-( )-O-( )-( ) 13,552. 14,957. 14,957. 14,575. 13,751. 15,156. 15,156. 14,774.
2548M-( )-(M7,M9)-( )-( ) 14,359. 15,714. 15,714. 15,318. 14,559. 15,913. 15,913. 15,517.
2548M-( )-E-( )-( ) 15,063. 16,465. 16,465. 16,055. 15,262. 16,664. 16,664. 16,254.
2548M-( )-P-( )-( ) 18,118. 18,118. 18,118. 17,732. 18,318. 18,317. 18,317. 17,931.
2549M-( )-O-( )-( ) 15,797. 17,263. 17,263. 16,850. 15,998. 17,464. 17,464. 17,051.
2549M-( )-(M7,M9)-( )-( ) 16,826. 18,235. 18,235. 17,805. 17,026. 18,436. 18,436. 18,006.
2549M-( )-E-( )-( ) 17,729. 19,208. 19,208. 18,745. 17,930. 19,409. 19,409. 18,946.
2549M-( )-P-( )-( ) 21,240. 21,240. 21,240. 20,802. 21,440. 21,441. 21,441. 21,003.
Construction
Base:
Welded square steel tube in polished
chrome finish. Optional satin chrome
finish. Adjustable glides.
Body:
Wood veneer sides and matching back
panel in oak, pearwood, or mahogany.
Oak, mahogany and pearwood finished
with transparent polyurethane coat. Only
2544M storage cabinet available in white
lacquer.
Top:
3/4� thick marble coated with
transparent polyester to help eliminate
use-associated stains. Squared edge
detail. 3 /4� wood top matching body
available. Wood tops finished with
transparent polyurethane coat.
Note:
Marbles with a polyester coating will
yellow over time.
197
Front:
Drawer and door fronts in same wood
veneers or lacquer finish as body. All
have polished aluminum pulls, top flush
mounted storage doors with magnetic
closures. Location A storage hinges open
from left. Location B storage hinges open
from right. Other hinges open from right.
Other hinging available as special. Pull
out drawers with smooth-glide extension
slides. Drawer and storage have
matching veneer inside.
KnollStudio

Designer(s):
Florence Knoll, 1954
Award(s):
American Institute of Interior
Designers First Award, USA,
1954
Order Code
Example: 2510T-C-G2
2510T Florence Knoll square
coffee table
C Polished Chrome
G2 Clear glass
Note:
Florence Knoll coffee tables are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and desks
and credenzas beginning on page 190.
Specify:
1. Pattern number
2. Base finish option
3. Top selection
Florence Knoll
Coffee Tables
description w d h weight top
2510T Square coffee table 23 1 /2� 23 1 /2� 17� 50 lbs. clear glass
23 1 /2� 23 1 /2� 17� 50 lbs. white or black
glass
23 1 /2� 23 1 /2� 17� 65 lbs. natural marble
23 1 /2� 23 1 /2� 17� 65 lbs. coated marble
23 1 /2� 23 1 /2� 17� 33 lbs. veneer
23 1 /2� 23 1 /2� 17� 65 lbs. coated marble
23 1 /2� 23 1 /2� 17� 33 lbs. pearwood
23 1 /2� 23 1 /2� 17� 65 lbs. coated marble
23 1 /2� 23 1 /2� 17� 65 lbs. coated marble
23 1 /2� 23 1 /2� 17� 65 lbs. coated marble
23 1 /2� 23 1 /2� 17� 67 lbs. granite
2511T Rectangular coffee table 45� 22 1 /2� 17� 76 lbs. clear glass
45� 22 1 /2� 17� 104 lbs. natural marble
45� 22 1 /2� 17� 104 lbs. coated marble
45� 22 1 /2� 17� 45 lbs. veneer
45� 22 1 /2� 17� 104 lbs. coated marble
45� 22 1 /2� 17� 45 lbs. pearwood
45� 22 1 /2� 17� 104 lbs. coated marble
45� 22 1 /2� 17� 104 lbs. coated marble
45� 22 1 /2� 17� 106 lbs. granite
45� 22 1 /2� 17� 104 lbs. coated marble
Ordering Information
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Glass top finishes:
Black Glass (suffix C1)
Clear Glass (suffix G2)
White Glass (suffix C2)
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verdi Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
198
Veneer finishes:
Ebonized Walnut (suffix D)
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Reff Dark Cherry (suffix V314)
Pearwood finish:
Pearwood (suffix P)
Granite top finish:
Black Andes: black (suffix GA)
KnollStudio 20-Day Program:
The Florence Knoll 2510T and 2511T
tables in polished chrome finish and
clear glass top are available on the
KnollStudio 20-Day program. For
specific information, consult pages
29-32.
Note:
Wood finishes on Florence Knoll low
tables differ from those on the table desk
and credenzas.
Base:
Polished chrome-plated or satin
chrome-plated steel.
Maintenance:
See pages 27-28.
Note:
KnollStudio logo and signature of
Florence Knoll are stamped into the
base.
The Florence Knoll Coffee and End
Tables in all finishes are Greenguard
certified.

pattern no. polished chrome (suffix C) satin chrome (suffix CO)
2510T( )-G2 $911. $980.
2510T-(C1, C2) 1,253. 1,322.
2510T-( )-(NGC, NGE) 1,588. 1,657.
2510T( )-(MN, MA) 1,671. 1,740.
2510T( )-(LO, LWA, D, V314) 1,737. 1,806.
2510T-( )-(GC, GE, GB) 1,751. 1,820.
2510T( )-(P) 1,884. 1,953.
2510T( )-(MC) 1,907. 1,976.
2510T( )-(MV) 2,213. 2,282.
2510T( )-(MW) 2,767. 2,836.
2510T( )-(GA) 2,849. 2,918.
2511T( )-G2 1,260. 1,360.
2511T-( )-(NGC, NGE) 2,118. 2,218.
2511T( )-(MN, MA) 2,288. 2,387.
2511T( )-(LO, LWA, D, V314) 2,305. 2,405.
2511T-( )-(GC, GE, GB) 2,397. 2,497.
2511T( )-(P) 2,510. 2,609.
2511T( )-(MC) 2,611. 2,711.
2511T( )-(MV) 3,085. 3,184.
2511T( )-(GA) 3,815. 3,915.
2511T( )-(MW) 3,856. 3,955.
Construction
Top:
5/8� thick polished plate glass or coated
marble with transparent polyester to help
eliminate use-associated stains. 3 /4� thick
natural marble and granite top with
protective sealer.
Note:
Marbles with a polyester coating will
yellow over time.
Wood Top:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various toned
or stained finishes for light oak, light
walnut, reff dark cherry and pearwood.
Ebonized walnut features a black stain
on walnut substrate. Tops are 3 /4� thick.
Base and Top ship seperately. Top is
attached to base with wood screws that
are enclosed in hardware packet.
199
KnollStudio

Designer(s):
Florence Knoll, 1954
Award(s):
American Institute of Interior
Designers First Award, USA,
1954
Order Code
Example: 2517T-CO-GS
2517T Florence Knoll square end
table
CO Satin Chrome
GS Cedar Stone
Note:
Florence Knoll end tables are part of a
collection. Please refer to Florence Knoll
lounge seating on page 80 and desks
and credenzas beginning on page 190.
Specify:
1. Pattern number
2. Base finish option
3. Top selection
Florence Knoll
End Tables
description w d h weight top
2515T Square end table 29 1 /2� 29 1 /2� 19� 71 lbs. clear glass
29 1 /2� 29 1 /2� 19� 95 lbs. natural marble
29 1 /2� 29 1 /2� 19� 95 lbs. coated marble
29 1 /2� 29 1 /2� 19� 95 lbs. coated marble
29 1 /2� 29 1 /2� 19� 44 lbs. veneer
29 1 /2� 29 1 /2� 19� 44 lbs. pearwood
29 1 /2� 29 1 /2� 19� 95 lbs. coated marble
29 1 /2� 29 1 /2� 19� 95 lbs. coated marble
29 1 /2� 29 1 /2� 19� 95 lbs. coated marble
29 1 /2� 29 1 /2� 19� 96 lbs. granite
2517T Square end table 35 1 /2� 35 1 /2� 19� 93 lbs. clear glass
35 1 /2� 35 1 /2� 19� 128 lbs. natural marble
35 1 /2� 35 1 /2� 19� 53 lbs. veneer
35 1 /2� 35 1 /2� 19� 128 lbs. coated marble
35 1 /2� 35 1 /2� 19� 53 lbs. pearwood
35 1 /2� 35 1 /2� 19� 128 lbs. coated marble
35 1 /2� 35 1 /2� 19� 128 lbs. coated marble
35 1 /2� 35 1 /2� 19� 128 lbs. coated marble
35 1 /2� 35 1 /2� 19� 131 lbs. granite
35 1 /2� 35 1 /2� 19� 128 lbs. coated marble
Ordering Information
Base finishes:
Polished Chrome (suffix C)
Satin Chrome (suffix CO)
Glass top finishes:
Clear Glass (suffix G2)
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verdi Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
200
Veneer finishes:
Ebonized Walnut (suffix D)
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Reff Dark Cherry (suffix V314)
Pearwood finish:
Pearwood (suffix P)
Granite top finish:
Black Andes: black (suffix GA)
Note:
Wood finishes on Florence Knoll low
tables differ from those on the table desk
and credenzas.
Base:
Polished chrome-plated or satin
chrome-plated steel.
Maintenance:
See pages 27-28.
Note:
KnollStudio logo and signature of
Florence Knoll are stamped into the
base.
The Florence Knoll Coffee and End
Tables in all finishes are Greenguard
certified.

pattern no. polished chrome (suffix C) satin chrome (suffix CO)
2515T( )-G2 $1,215. $1,287.
2515T-( )-(NGC, NGE) 1,871. 1,943.
2515T( )-(MN, MA) 2,001. 2,073.
2515T-( )-(GC, GE, GB) 2,097. 2,169.
2515T( )-(LO, LWA, D, V314) 2,381. 2,453.
2515T( )-(P) 2,585. 2,657.
2515T( )-(MC) 2,742. 2,814.
2515T( )-(MV) 2,782. 2,854.
2515T( )-(MW) 3,478. 3,550.
2515T( )-(GA) 3,650. 3,722.
2517T-( )-G2 1,413. 1,512.
2517T-( )-(NGC, NGE) 2,434. 2,533.
2517T( )-(LO, LWA, D, V314) 2,481. 2,580.
2517T( )-(MN, MA) 2,666. 2,765.
2517T( )-(P) 2,686. 2,785.
2517T-( )-(GC, GE, GB) 2,793. 2,892.
2517T( )-(MV) 3,483. 3,582.
2517T( )-(MC) 3,652. 3,752.
2517T( )-(GA) 4,349. 4,448.
2517T( )-(MW) 4,353. 4,453.
Construction
Top:
5 /8� thick polished plate glass or coated
marble with transparent polyester to help
eliminate use-associated stains. 3 /4� thick
natural marble and granite top with
protective sealer.
Note:
Marbles with a polyester coating will
yellow over time.
Wood Top:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various toned
or stained finishes for light oak, light
walnut, reff dark cherry and pearwood.
Ebonized walnut features a black stain
on walnut substrate. Tops are 3 /4� thick.
Tops contain threaded inserts and attach
to base with screws.
201
KnollStudio

Designer(s):
Ross Lovegrove, 2007
Award(s):
Good Design Award, 2007
Order Code
Example: RL2-PL3-118
RL2 Ross Lovegrove
Rectangular table
PL3 Panelite, red
118 White
Specify:
1. Pattern number
2. Top finish selection
3. Base finish selection
Ross Lovegrove
Table Desks
description w d h weight top
RL1 Rectangular table 78 3 /4� 39 3 /8� 28� 154 lbs. laminate
78 3 /4� 39 3 /8� 28� 213 lbs. bronze and
starphire glass
RL2 Rectangular Table 78 3 /4� 39 3 /8� 28� 160 lbs. laminate
78 3 /4� 39 3 /8� 28� 220 lbs. bronze and
starphire glass
78 3 /4� 39 3 /8� 28� 220 lbs. painted, etched
glass
78 3 /4� 39 3 /8� 28� 119 lbs. panelite
RL3 Rectangular Table 78 3 /4� 39 3 /8� 28� 218 lbs. starphire glass
Ordering Information
Glass finishes:
Bronze glass (suffix BRG)
Painted green, acid etched glass
(suffix GA1)
Painted blue, acid etched glass
(suffix GA2)
Painted red, acid etched glass
(suffix GA3)
Starphire glass (suffix SFG)
Panelite finishes:
Clear (suffix PL1)
Red (suffix PL3)
Laminate finishes:
White (suffix 118)
202
Base finish:
Metallic Bronze (suffix BRM)
Multi-colored (suffix MTC)
Robin’s Egg Blue (suffix REB)
Silver (suffix SLV)
White (suffix 118)
Maintenance:
See pages 27-28.
Note:
Multi-color base available on RL3 only.
Base consists of robin’s egg blue, rust,
yellow and orange. Top and base are
shipped in seperate packages. Bases
have nameplate with designer’s
signature. Not suitable for outdoor
use.
The Ross Lovegrove Table Desk is
Greenguard certified.
Construction
Glass Tops:
Starphire Glass Top:
Tempered Starphire glass is more clear
and luminous than regular glass. The
low iron content gives glass a crystal
quality. 1 /8� bevel edge has an
exceptionally clear character.
Bronze Glass:
Tempered bronze colored glass; 1 /2� thick
with beveled edge and polished edge.
Painted Acid Etched Glass:
Tempered acid etched top surface with
painted underside.
Please note all glass tops have shaped
corners. The RL1 features a 7� radius
corners and the RL2 and RL3 feature a
3� radius corner. All glass tops are 1 /2�
thick with a beveled and polished edge.

pattern no.
RL1-118-( ) $3,990.
RL1-(BRG, SFG)-( ) 4,990.
RL2-118-( ) 3,515.
RL2-(BRG, SFG)-( ) 4,515.
RL2-(GA1, GA2, GA3)-( ) 4,820.
RL2-(PL1, PL3)-( ) 9,765.
RL3-SFG-MTC 4,695.
Panelite:
Rectangular translucent cast polymer
panel with internal structural honeycomb
core; integral resin edge exposes
honeycomb core. Tops are 1� thick.
Laminate:
Rectangular tops are 1 1 /8� thick with
3mm silver edge band.
Base:
1 3 /4� diameter steel tube, powder-coat
finish and machined aluminum
connections. Bases ship flat, with simple
assembly required.
Glides:
Adjustable clear nylon.
203
KnollStudio

Designer(s):
Ross Lovegrove, 2007
Order Code
Example: RL5L-60-GA1-118
RL5L-60 60� Lovegrove round table
GA1 Painted Green, acid etched
glass
118 White
Specify:
1. Pattern number
2. Top finish selection
3. Base finish selection
Ross Lovegrove
Round Tables
description w h weight top
RL5M-42 Round table, medium 42� 28� 72 lbs. laminate
42� 28� 129 lbs. bronze and starphire
glass
42� 28� 129 lbs. painted, etched glass
RL5M-48 Round table, medium 48� 28� 85 lbs. laminate
48� 28� 126 lbs. bronze and starphire
glass
48� 28� 126 lbs. painted, etched glass
RL5L-54 Round table, large 54� 28� 116 lbs. laminate
54� 28� 138 lbs. bronze and starphire
glass
54� 28� 138 lbs. painted, etched glass
RL5L-60 Round table, large 60� 28� 132 lbs. laminate
60� 28� 163 lbs. bronze and starphire
glass
60� 28� 163 lbs. painted, etched glass
Ordering Information
Glass finishes:
Bronze glass (suffix BRG)
Painted green, acid etched glass
(suffix GA1)
Painted blue, acid etched glass
(suffix GA2)
Painted red, acid etched glass
(suffix GA3)
Starphire glass (suffix SFG)
Laminate finishes:
White (suffix 118)
204
Base finish:
Metallic Bronze (suffix BRM)
Robin’s Egg Blue (suffix REB)
Silver (suffix SLV)
White (suffix 118)
Maintenance:
See pages 27-28.
Note:
Top and base are shipped in
seperate packages. Bases have
nameplate with designer’s signature. Not
suitable for outdoor use.
The Ross Lovegrove Round Table is
Greenguard certified.
Construction
Glass Tops:
Starphire Glass Top:
Tempered Starphire glass is more clear
and luminous than regular glass. The
low iron content gives glass a crystal
quality. 1 /8� bevel edge has an
exceptionally clear character.
Bronze Glass:
Tempered bronze colored glass; 1 /2� thick
with beveled edge and polished edge.
Painted Acid Etched Glass:
Tempered acid etched top surface with
painted underside.

pattern no.
RL5M-42-118-( ) $2,435.
RL5M-42-(BRG, SFG)-( ) 3,215.
RL5M-42-(GA1, GA2, GA3)-( ) 3,375.
RL5M-48-118-( ) 2,440.
RL5M-48-(BRG, SFG)-( ) 3,220.
RL5M-48-(GA1, GA2, GA3)-( ) 3,380.
RL5L-54-118-( ) 2,970.
RL5L-54-(BRG, SFG)-( ) 4,055.
RL5L-54-(GA1, GA2, GA3)-( ) 4,360.
RL5L-60-118-( ) 2,990.
RL5L-60-(BRG, SFG)-( ) 4,075.
RL5L-60-(GA1, GA2, GA3)-( ) 4,380.
Laminate:
Round tops are 1 1 /8� thick with 3mm
silver edge band.
Base:
1 3 /4� diameter steel tube, powder-coat
finish and machined aluminum
connections. Bases ship flat, with simple
assembly required.
Glides:
Adjustable clear nylon.
205
KnollStudio

Designer(s):
Ross Lovegrove, 2007
Order Code
Example: RL11-17-BRG-BRM
RL11-17 RL11 Tri-Oval Table, 17�
high
BRG Bronze glass
BRM Metallic Bronze
Example:
1. Pattern number
2. Top finish
3. Base finish
Ross Lovegrove
Tri-Oval Tables
description top w d h weight top
RL11-17 Tri-Oval Table 54 1 /2� 35� 17� 89 lbs. bronze and
starphire glass
54 1 /2� 35� 17� 89 lbs. painted, etched
glass
RL11-22 Tri-Oval Table 54 1 /2� 35� 22� 96 lbs. bronze and
starphire glass
54 1 /2� 35� 22� 96 lbs. painted, etched
glass
Ordering Information
Glass finishes:
Bronze glass (suffix BRG)
Painted green, acid etched glass
(suffix GA1)
Painted blue, acid etched glass
(suffix GA2)
Painted red, acid etched glass
(suffix GA3)
Starphire glass (suffix SFG)
206
Base finish:
Metallic Bronze (suffix BRM)
Robin’s Egg Blue (suffix REB)
Silver (suffix SLV)
White (suffix 118)
Maintenance:
See pages 27-28.
Note:
Top and base are shipped in
seperate packages. Bases have
nameplate with designer’s signature. Not
suitable for outdoor use.
The Ross Lovegrove Tri-Oval Table is
Greenguard certified.
Construction
Glass Tops:
Starphire Glass Top:
Tempered Starphire glass is more clear
and luminous than regular glass. The
low iron content gives glass a crystal
quality. 1 /8� bevel edge has an
exceptionally clear character.
Bronze Glass:
Tempered bronze colored glass; 1 /2� thick
with beveled edge and polished edge.
Painted Acid Etched Glass:
Tempered acid etched top surface with
painted underside.

pattern no.
RL11-17-(BRG,SFG)-( ) $3,165.
RL11-17-(GA1,GA2, GA3)-( ) 3,325.
RL11-22-(BRG,SFG)-( ) 3,170.
RL11-22-(GA1,GA2, GA3)-( ) 3,330.
Base:
1 3 /4� diameter steel tube with
powder-coat finish.
Glides:
Adjustable clear nylon.
207
KnollStudio

Designer(s):
Ross Lovegrove, 2007
Order Code
Example: RL9S-GA1-118
RL9S RL9S Credenza, 26 1 /2� high
GA1 Painted green etched glass
118 White
Example: RL7M-SLV
RL7M Mobile Pedestal
SLV Silver
Specify:
1. Pattern number
2. Top finish
3. Base finish
For mobile pedestal, specify:
1. Pattern number
2. Finish selection
Ross Lovegrove
Credenzas and Mobile Pedestal
description w d h weight top
RL9S Credenza 74 3 /4� 18� 26 1 /2� 386 lbs. laminate
74 3 /4� 18� 26 1 /2� 476 lbs. bronze and
starphire glass
74 3 /4� 18� 26 1 /2� 476 lbs. painted, etched
glass
74 3 /4� 18� 26 1 /2� 432 lbs. panelite
RL9L Low Credenza 74 3 /4� 18� 21� 450 lbs. laminate
74 3 /4� 18� 21� 413 lbs. bronze and
starphire glass
74 3 /4� 18� 21� 413 lbs. painted, etched
glass
74 3 /4� 18� 21� 369 lbs. panelite
RL7M Mobile Pedestal 18 1 /2� 18� 26� 104 lbs.
Ordering Information
Glass finishes:
Starphire glass (suffix SFG)
Bronze glass (suffix BRG)
Painted green, acid etched glass
(suffix GA1)
Painted blue, acid etched glass
(suffix GA2)
Painted red, acid etched glass
(suffix GA3)
Laminate finishes:
White (suffix 118)
Panelite finishes:
Clear (suffix PL1)
Red (suffix PL3)
208
Base finish:
Metallic Bronze (suffix BRM)
Robin’s Egg Blue (suffix REB)
Silver (suffix SLV)
White (suffix 118)
Maintenance:
See pages 27-28.
Note:
Body and bases are shipped in seperate
packages. Body has nameplate with
designer’s signature.
The Ross Lovegrove Credenza and
Mobile Pedestal is Greenguard certified.
Construction
Glass Tops:
Starphire Glass Top:
Tempered Starphire glass is more clear
and luminous than regular glass. The
low iron content gives glass a crystal
quality. 1 /8� bevel edge has an
exceptionally clear character.
Bronze Glass:
Tempered bronze colored glass; 1 /2� thick
with beveled edge and polished edge.
Painted Acid Etched Glass:
Tempered acid etched top surface with
painted underside.

pattern no.
RL9S-118-( ) $19,490.
RL9S-(BRG,SFG)-( ) 19,750.
RL9S-(GA1, GA2, GA3)-( ) 19,890.
RL9S-(PL1, PL3)-( ) 21,985.
RL9L-118-( ) 15,725.
RL9L-(BRG,SFG)-( ) 16,000.
RL9L-(GA1,GA2,GA3)-( ) 16,140.
RL9L-(PL1,PL3)-( ) 18,235.
RL7M-( ) 4,500.
Panelite:
Rectangular translucent cast polymer
panel with internal structural honeycomb
core; integral resin edge exposes
honeycomb core. Tops are 1� thick.
Laminate:
Tops are 1 1 /8� thick with 3mm silver edge
band.
Body:
Formed steel case with radius corners
and hemmed edge detail. High-gloss
painted exterior surface with matching
powder-coat interior surface.
Under-drawer slides with magnetic touch
latch closures.
RL9S Credenza:
Four box drawers, one full extension
legal-size file drawer. Two storage
cabinets with adjustable shelves.
RL9L Low Credenza:
Four storage drawers.
RL7M Mobile Pedestal:
One box drawer and one full extension
legal-size file drawer.
209
Base:
1 3 /4� diameter steel tube with
powder-coat finish.
Glides:
Adjustable clear nylon.
KnollStudio

Designer(s):
Ludwig Mies van der Rohe, 1930
Order Code
Example: 252C-SFG
252 Barcelona table
C Polished Chrome
SFG Starphire Glass
Note:
The Mies Barcelona and MR tables are
part of a collection. Please refer to Mies
side chairs and lounge seating beginning
on page 100.
Specify:
1. Pattern number
2. Base finish option
3. Top selection
Ludwig Mies van der Rohe
Barcelona� Table, MR Table
description w d h weight top base
252 Barcelona table 40� 40� 18.5� 140 lbs. Clear glass Polished
chrome
40� 40� 17� 134 lbs. Starphire
glass
Stainless steel
40� 40� 18.5� 140 lbs. Starphire Polished
glass chrome
40� 40� 17� 134 lbs. Clear glass Stainless steel
259TS MR table 28.5� 20.8� 37 lbs. Clear glass Stainless steel
Ordering Information
Shipping:
Top and base of MR Tables ship in
separate packages.
KnollStudio 20-Day Program:
The Barcelona table in chrome and the
MR table are available on the
KnollStudio 20-day program. For
specific information, consult pages
29-32.
Maintenance:
See pages 27-28.
Note:
The KnollStudio logo and signature of
Ludwig Mies van der Rohe is stamped
into the base of the MR and Barcelona
tables.
The Barcelona Table and MR Table are
Greenguard certified.
210
Construction
BARCELONA TABLE
Clear Glass Top:
3 1
/4� thick top with a /8� wide beveled
edge. Top and edges have a slight green
tint.
Starphire Glass Top:
Starphire glass is more clear and
luminous than regular glass. The low
iron content gives glass a crystal
quality. 1 /8� bevel edge has an
exceptionally clear character.
Stainless Steel Base:
Premium grade 202 bar stock stainless
steel. Single piece construction ensures
long-term durability. Frame hand-ground
and hand-buffed to mirror finish.
Polished Chrome Base:
Hand-ground and hand-buffed to a
mirror finish. Single piece construction.
Bumpers:
Polished Chrome table has black
bumpers. Stainless steel table has white
bumpers.
MR TABLE
Top:
1
/2� thick clear polished plate glass.
Base:
Frame and legs are tubular and
rectangular stainless steel welded
together. Seamless construction buffed to
a mirror finish.

pattern no.
KnollStudio
252C $2,205.
252-SFG 4,090.
252C-SFG 2,757.
252 3,662.
259TS-G 1,739.
211

Designer(s):
Ludwig Mies van der Rohe, 1930
Design from the Mies van der
Rohe Archive of The Museum of
Modern Art
Order Code
Example: 759-OWE
759 Krefeld square coffee table
OWE Wenge
Note:
The Mies Krefeld tables are part of a
collection. Please refer to Mies side
chairs and lounge seating beginning on
page 100.
Specify:
1. Pattern number
2. Finish selection
Ludwig Mies van der Rohe
Krefeld Side and Coffee Table
description w d h weight
759 Square Table 27 1 /2� 27 1 /2� 17 3 /4� 35 lbs.
760 Rectangular Coffee Table 54� 27 1 /2� 15 3 /4� 63 lbs.
Ordering Information
Table finishes:
Wenge (OWE)
Medium Cherry (OM)
Deep Red Mahogany (OF)
Light Walnut (OWA)
Clear Oak (OC)
212
Maintenance:
See pages 26-27.
Construction
Base and Top:
Oak with stained or clear oak finish.
Open pore finish. Black plastic glides.
Seamless connection between top and
base.

Designer(s):
Pascal Mourgue, 1985
Award(s):
The Roscoe Commendation, USA
1985; IBD Product Design Award,
1985; Corporate Design and
Reality Product Design Award,
1986
* Based on 26� wide arm chairs
Order Code
Example: 47TS31-1-V315
47TS31 Pascal rectangular table
1 Black Epoxy
V315 Light Cherry Veneer
Example: 47TSV15-AP-119-V315
47TSV15 Pascal square table,
with veneer edge
AP Polished Aluminum
119 Pumice
V315 Light Cherry Veneer
Specify:
1. Pattern number
2. Leg finish selection
3. Top finish selection
4. Wood bullnose finish selection (for
laminate tops only)
Pascal Mourgue
Square and Rectangular Conference Tables
PVC-T edge
description
seating
capacity * section legs w d h weight top
47TS15 square table 8 1 4 60 1 /4� 60 1 /4� 28 3 /4� 309 lbs. Coated
marble
8 1 4 60 1 /4� 60 1 /4� 28 3 /4� 309 lbs. Natural
marble
8 1 4 60 1 /4� 60 1 /4� 28 3 /4� 178 lbs. Laminate
8 1 4 60 1 /4� 60 1 /4� 28 3 /4� 166 lbs. Veneer
47TS20 rectangular table 8 1 4 80� 48 1 /2� 28 3 /4� 328 lbs. Coated
marble
8 1 4 80� 48 1 /2� 28 3 /4� 328 lbs. Natural
marble
8 1 4 80� 48 1 /2� 28 3 /4� 187 lbs. Laminate
8 1 4 80� 48 1 /2� 28 3 /4� 175 lbs. Veneer
47TS31 rectangular table 10 2 6 120� 48 1 /2� 28 3 /4� 279 lbs. Laminate
10 2 6 120� 48 1 /2� 28 3 /4� 262 lbs. Veneer
47TS48 rectangular table 16 3 8 204� 48 1 /2� 28 3 /4� 450 lbs. Laminate
16 3 8 204� 48 1 /2� 28 3 /4� 425 lbs. Veneer
47TS64 rectangular table 22 4 10 268� 48 1 /2� 28 3 /4� 586 lbs. Laminate
22 4 10 268� 48 1 /2� 28 3 /4� 554 lbs. Veneer
Ordering Information
Leg finishes:
Matte Black Epoxy (suffix 1)
Polished Aluminum (suffix AP)
Laminate finishes:
Bright White (suffix 118)
Folkstone Grey (suffix 114)
Fog (suffix 128)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
214
Veneer/bullnose finishes:
American Cherry (suffix X)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
Coated marble finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Natural marble finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Veneer edge:
For veneer edge, add ’V’ after 4th digit.
For example, for a 48 1 /2� square table
with veneer edge, specify 47TSV12.
Certified Wood:
Tables manufactured using FSC certified
hardwoods and veneers and/or LEED
compliant recyclable components are
available through Custom Product
Development. Extended leadtime and
upcharge apply.
Maintenance:
See pages 27-28.
Note:
Polyester marble coating will yellow over
time.
The Pascal Table with Laminate top and
PVC edge is Greenguard certified.

pattern no. pvc edge veneer edge (add V after 4th digit) marble top
47TS15-(1, AP)-(GC, GE, GB) $10,917.
47TS15-(1, AP)-(NGC, NGE) 9,167.
47TS15-(1, AP)-( )-( ) 3,742. 4,365.
47TS15-(1, AP)-( ) 4,208. 5,142.
47TS20-(1, AP)-(GC, GE, GB) 11,033.
47TS20-(1, AP)-(NGC, NGE) 9,282.
47TS20-(1, AP)-( )-( ) 3,742. 4,208.
47TS20-(1, AP)-( ) 4,365. 5,142.
47TS31-(1, AP)-( )-( ) 5,765. 7,170.
47TS31-(1, AP)-( ) 7,014. 8,572.
47TS48-(1, AP)-( )-( ) 10,239. 12,156.
47TS48-(1, AP)-( ) 13,403. 15,119.
47TS64-(1, AP)-( )-( ) 11,776. 14,821.
47TS64-(1, AP)-( ) 16,676. 18,702.
Construction
Combining tables:
If individual tables are purchased with
the intent of placing them contiguously,
they should be quoted for flitch or book
match. When desired specifically for
combination, note that information on the
order so that bullnose edges and legs at
each table junction are removable.
Leveling strip slides into slots at edges.
Legs connect into inserts that span tops.
Bullnose edges store for future retrieval
and separation.
Standard size tables:
For additional standard size tables
please consult your KnollStudio
representative, dealer or Customer
Service associate.
Special width tables:
For standard depth tables (42 3 /4�,481 /2�,
and 60 1 /4�), you may determine list
pricing on any special width between two
standard sizes simply by identifying the
next higher standard width tables, and
add 5% to the standard list price.
For example, if requesting an 80�wx
42 3 /4�d table, you would identify the next
wider table (84�wx423 /4�d) and add 5%
to the list price of that standard size.
Consult a KnollStudio representative for
special Order Code.
Special sizes and finishes:
For all other sizes and for special
finishes, consult your KnollStudio
representative, dealer, or Customer
Services for information.
Legs:
Extruded aluminum leg in black epoxy or
polished aluminum finish. Multiple
sectioned tables have two legs bridging
each section, plus two legs at each end.
Marble top:
13/16� thick marble coated with
transparent polyester to help eliminate
use-associated stains.
215
Laminate and wood tops:
Tops are 1 1 /8� thick. Wood tops are
cross-veneered. Tops available with
black semi-gloss extruded PVC-T mold
bullnose edge or stained solid wood
bullnose edge. For PVC-T bullnose,
short ends of rectangular table have a
wood bullnose with a black semi-gloss
paint to match the PVC-T edges.
Glides:
Adjustable nylon, black epoxy finish.
Shipping:
Top and base shipped in separate pieces;
assembly required.
To assemble:
Legs connect into predrilled inserts
using mounting hardware (included).
Bullnose edge detail:
KnollStudio

Designer(s):
Pascal Mourgue, 1985
Award(s):
The Roscoe Commendation, USA
1985; IBD Product Design Award,
1985; Corporate Design and
Reality Product Design Award,
1986
* Based on 26� wide arm chairs
Order Code
Example: 47TR26-1-K
47TR26 Pascal racetrack table
1 Black Epoxy
K Maple Veneer
Example: 47TRV15-AP-J
47TRV15 Pascal round table, with
veneer edge
AP Polished Aluminum
J Warm Brown Walnut Veneer
Pascal Mourgue
Round and Racetrack Conference Tables
PVC-T edge
description
seating
capacity * section legs w d h weight top
47TR15 round table 7 1 4 60 1 /4� 28 3 /4� 250 lbs. Coated
marble
7 1 4 60 1 /4� 28 3 /4� 250 lbs. Natural
marble
7 1 4 60 1 /4� 28 3 /4� 147 lbs. Laminate
7 1 4 60 1 /4� 28 3 /4� 138 lbs. Veneer
47TR24 racetrack table 8 1 4 97� 48 1 /2� 28 3 /4� 605 lbs. Coated
marble
8 1 4 97� 48 1 /2� 28 3 /4� 605 lbs. Natural
marble
8 1 4 97� 48 1 /2� 28 3 /4� 315 lbs. Laminate
8 1 4 97� 48 1 /2� 28 3 /4� 313 lbs. Veneer
47TR26 racetrack table 8 2 6 108� 48 1 /2� 28 3 /4� 380 lbs. Laminate
8 2 6 108� 48 1 /2� 28 3 /4� 377 lbs. Veneer
47TR30 racetrack table 10 2 6 120� 48 1 /2� 28 3 /4� 280 lbs. Laminate
10 2 6 120� 48 1 /2� 28 3 /4� 262 lbs. Veneer
47TR50 racetrack table 16 3 8 192� 60 1 /4� 28 3 /4� 510 lbs. Laminate
16 3 8 192� 60 1 /4� 28 3 /4� 485 lbs. Veneer
47TR72 racetrack table 6 1 4 84� 42 3 /4� 28 3 /4� 177 lbs. Laminate
6 1 4 84� 42 3 /4� 28 3 /4� 165 lbs. Veneer
Ordering Information
Specify:
1. Pattern number
2. Leg finish selection
3. Top finish selection
4. Wood bullnose finish selection (for
laminate tops only)
Leg finishes:
Matte Black Epoxy (suffix 1)
Polished Aluminum (suffix AP)
Laminate finishes:
Bright White (suffix 118)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Soft Grey (suffix 117)
Slate (suffix SL)
216
Veneer/bullnose finishes:
American Cherry (suffix X)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
Coated marble finishes:
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Natural marble finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Veneer edge:
For veneer edge, add ’V’ after 4th digit.
For example, for a 48 1 /2� round table,
specify 47TRV12.
Certified Wood:
Tables manufactured using FSC certified
hardwoods and veneers and/or LEED
compliant recyclable components are
available through Custom Product
Development. Extended leadtime and
upcharge apply.
Maintenance:
See pages 27-28.
Note:
Polyester marble coating will yellow over
time.
The Pascal Table with Laminate top and
PVC edge is Greenguard certified.

pattern no. pvc edge veneer edge (add V after 4th digit) marble top
47TR15-(1, AP)-(GC, GE, GB) $8,765.
47TR15-(1, AP)-(NGC, NGE) 7,435.
47TR15-(1, AP)-( )-( ) 3,897. 5,142.
47TR15-(1, AP)-( ) 4,365. 6,078.
47TR24-(1, AP)-(GC, GE, GB) 13,070.
47TR24-(1, AP)-(NGC, NGE) 10,905.
47TR24-(1, AP)-( )-( ) 4,520. 6,078.
47TR24-(1, AP)-( ) 5,298. 7,170.
47TR26-(1, AP)-( )-( ) 5,461. 7,339.
47TR26-(1, AP)-( ) 6,485. 8,535.
47TR30-(1, AP)-( )-( ) 6,485. 8,874.
47TR30-(1, AP)-( ) 8,535. 10,583.
47TR50-(1, AP)-( )-( ) 9,975. 14,184.
47TR50-(1, AP)-( ) 16,213. 20,139.
47TR72-(1, AP)-( )-( ) 4,053. 5,298.
47TR72-(1, AP)-( ) 4,676. 6,546.
Construction
Standard size tables:
For additional standard size tables
please consult your KnollStudio
representative, dealer or Customer
Service associate.
Special width tables:
For standard depth tables (42 3 /4�,481 /2�,
and 60 1 /4�), you may determine list
pricing on any special width between two
standard sizes simply by identifying the
next higher standard width tables, and
add 5% to the standard list price.
For example, if requesting an 80�wx
42 3 /4�d table, you would identify the next
wider table (84�wx423 /4�d) and add 5%
to the list price of that standard size.
Consult a KnollStudio representative for
special Order Code.
Special sizes and finishes:
For all other sizes and for special
finishes, consult your KnollStudio
representative, dealer, or Customer
Services for information.
Legs:
Extruded aluminum leg in black epoxy or
polished aluminum finish. Multiple
sectioned tables have two legs bridging
each section, plus two legs at each end.
Laminate and wood tops:
Tops are 1 1 /8� thick. Wood tops are
cross-veneered. Tops available with
black semi-gloss extruded PVC-T mold
bullnose edge or stained solid wood
bullnose edge. Bullnose edges on ends of
racetrack tables are single, continuous
arcs of wood.
Marble top:
13/16� thick marble coated with
transparent polyester to help eliminate
use-associated stains.
Glides:
Adjustable nylon, black epoxy finish.
Shipping:
Top and base shipped in separate pieces;
assembly required.
217
To assemble:
Legs connect into predrilled inserts
using mounting hardware (included).
Bullnose edge detail:
KnollStudio

Designer(s):
Pascal Mourgue, 1985
Award(s):
The Roscoe Commendation, USA
1985; IBD Product Design Award,
1985; Corporate Design and
Reality Product Design Award,
1986
* Based on 26� wide arm chairs
Order Code
Example: 47TR19-AP-111
47TR19 Pascal bullet table
AP Polished Aluminum
111 Jet Black Laminate
Example: 47TRV22-1-111-B
47TRV22 Pascal bullet table,
with veneer edge
1 Black Epoxy
111 Jet Black Laminate
B Natural Beech Veneer
Pascal Mourgue
Bullet Conference Tables
PVC-T edge
description
seating
capacity * section legs w d h weight top
47TR22 bullet table 8 1 4 87 3 /4� 48 1 /2� 28 3 /4� 356 lbs. Coated
marble
8 1 4 87 3 /4� 48 1 /2� 28 3 /4� 356 lbs. Natural
marble
8 1 4 87 3 /4� 48 1 /2� 28 3 /4� 201 lbs. Laminate
8 1 4 87 3 /4� 48 1 /2� 28 3 /4� 188 lbs. Veneer
47TR19 bullet table 7 1 4 76� 60 1 /4� 28 3 /4� 353 lbs. Coated
marble
7 1 4 76� 60 1 /4� 28 3 /4� 353 lbs. Natural
marble
7 1 4 76� 60 1 /4� 28 3 /4� 200 lbs. Laminate
7 1 4 76� 60 1 /4� 28 3 /4� 187 lbs. Veneer
Ordering Information
Specify:
1. Pattern number
2. Leg finish selection
3. Top finish selection
4. Wood bullnose finish selection (for
laminate tops only)
Leg finishes:
Matte Black Epoxy (suffix 1)
Polished Aluminum (suffix AP)
Laminate finishes:
Bright White (suffix 118)
Fog (suffix 128)
Jet Black (suffix 111)
Light Grey (suffix L)
Pumice (suffix 119)
Slate (suffix SL)
218
Laminate finishes, continued:
Folkstone Grey (suffix 114)
Soft Grey (suffix 117)
Veneer/bullnose finishes:
American Cherry (suffix X)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
Coated marble finishes:
Carrara: white-grey (suffic GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Natural marble finishes:
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Veneer edge:
For veneer edge, add ’V’ after 4th digit.
For example, for a 204� x60 1 /4�
rectangular table with veneer edge,
specify 47TSV52.

pattern no. pvc edge veneer edge (add V after 4th digit) marble top
47TR22-(1, AP)-(GC, GE, GB) $11,427.
47TR22-(1, AP)-(NGC, NGE) 9,595.
47TR22-(1, AP)-( )-( ) 4,267. 5,765.
47TR22-(1, AP)-( ) 4,676. 6,546.
47TR19-(1, AP)-(GC, GE, GB) 12,122.
47TR19-(1, AP)-(NGC, NGE) 10,148.
47TR19-(1, AP)-( )-( ) 4,267. 5,765.
47TR19-(1, AP)-( ) 4,676. 6,546.
Certified Wood:
Tables manufactured using FSC certified
hardwoods and veneers and/or LEED
compliant recyclable components are
available through Custom Product
Development. Extended leadtime and
upcharge apply.
Maintenance:
See pages 27-28.
Note:
Polyester marble coating will yellow over
time.
The Pascal Table with Laminate top and
PVC edge is Greenguard certified.
Construction
Standard size tables:
For additional standard size tables
please consult your KnollStudio
representative, dealer or Customer
Service associate.
Special width tables:
For standard depth tables (42 3 /4�,481 /2�,
and 60 1 /4�), you may determine list
pricing on any special width between two
standard sizes simply by identifying the
next higher standard width tables, and
add 5% to the standard list price.
For example, if requesting an 80�wx
42 3 /4�d table, you would identify the next
wider table (84�wx423 /4�d) and add 5%
to the list price of that standard size.
Consult a KnollStudio representative for
special Order Code.
219
Special sizes and finishes:
For all other sizes and for special
finishes, consult your KnollStudio
representative, dealer, or Customer
Services for information.
Legs:
Extruded aluminum leg in black epoxy or
polished aluminum finish. Multiple
sectioned tables have two legs bridging
each section, plus two legs at each end.
Laminate and wood tops:
Tops are 1 1 /8� thick. Wood tops are
cross-veneered. Tops available with
black semi-gloss extruded PVC-T mold
bullnose edge or stained solid wood
bullnose edge. Bullnose edges on ends of
racetrack tables are single, continuous
arcs of wood.
KnollStudio
Marble top:
1 3 /16� thick marble coated with
transparent polyester to help eliminate
use-associated stains.
Glides:
Adjustable nylon, black epoxy finish.
Shipping:
Top and base shipped in separate pieces;
assembly required.
To assemble:
Legs connect into predrilled inserts
using mounting hardware (included).

Designer(s):
George Nakashima, 1946
Order Code
Specify: N10-HK-AW
N10 Splay-Leg Table
HK Hickory
AW American Walnut
Specify: N20-DF-BS
N20 Tray
DF Douglas Fir
BS Brazilian Santos
Note:
The Splay-Leg Table and Tray are part of
a collection. Please refer to the Straight
chair on page 116.
For Splay-Leg Table, specify:
1. Pattern number
2. Primary finish
3. Edge detail finish
For Splay-Leg Tray, specify:
1. Pattern number
2. Tray finish
3. Edge detail finish
George Nakashima
Splay-Leg Table and Tray
description w d h weight
N10 Splay-Leg Table 37 3 /4� 34 1 /4� 17 1 /2� 33 lbs.
N20 Tray 21 3 /8� 16� 1 3 /4� 5 lbs.
Ordering Information
Finishes, table only:
American Walnut (suffix AW)
Hickory (suffix HK)
Finishes, tray only:
Brazilian Santos (suffix BS)
Douglas Fir (suffix DF)
Wenge (suffix WG)
Maintenance:
See pages 27-27.
Note:
Each table and tray features George
Nakashima’s signature under the table
top.
The Splay-Leg Table is Greenguard
certified.
220
Construction
TABLE:
Top:
Tops are veneered with reverse
slip-matched cathedral pattern, matching
solid wood edge in clear low-sheen
finish.
Legs, apron and edge detail:
Solid American Walnut. Mortise and
tenon joints with solid brass hardware.
Nylon glides. Edge detail finish is
available in American Walnut only.
TRAY:
Top:
Tops are constructed of solid Douglas Fir
lumber that is quarter-cut and finished in
a clear low-sheen finish.
Edge detail:
Available in two finishes: solid Brazilian
Santos; solid Wenge. Edge details are
joined to top with mortise and tenon
joints.

pattern no.
KnollStudio
N10-( )-AW $2,300.
N20-DF-( ) 500.
221

Designer(s):
Isamu Noguchi, 1954
Order Code
Example: 312-F2
312 Cyclone dining table
F2 White Laminate top
Specify:
1. Pattern number
2. Top finish selection
Isamu Noguchi
Cyclone Dining and Side Tables
description w d h weight top base
311 Cyclone Dining table 36� 28� 89 lbs. Black
laminate
36� 28� 89 lbs. White
laminate
312 Cyclone Dining table 42� 28� 97 lbs. Black
laminate
42� 28� 97 lbs. White
laminate
87 Side table 24� 20� 31 lbs. Black
laminate
24� 20� 31 lbs. White
laminate
Ordering Information
Laminate top finish:
Black (F1)
White (F2)
222
KnollStudio 20-Day Program:
The Noguchi table is available on the
KnollStudio 20-day program in round
36� with a white laminate top. For more
specific information, please consult
pages 29-32.
Cast iron
black
Cast iron
black
Cast iron
black
Cast iron
black
Cast iron
black
Cast iron
black
Note:
Each table features a signature plate
under the table top with the KnollStudio
logo and Isamu Noguchi’s signature.
Maintenance:
See pages 27-28.
Note:
The Cyclone Table is Greenguard
certified.

pattern no.
311-F1 $2,606.
311-F2 2,606.
312-F1 2,862.
312-F2 2,862.
87-F1 1,718.
87-F2 1,718.
Construction
Noguchi table top:
Top is black or white laminate with a
natural birch edge. Top is 0.8� thick.
Noguchi table base:
Cast iron, black textured powder-coat.
Noguchi table column:
Steel wire column, chrome plated finish.
223
KnollStudio

Designer(s):
Jorge Pensi, 1988
Award(s):
First Place, Sidi Selection,
Valencia, Spain, 1988; ‘‘Delta
Plate’’ of ADI FAD, 1988; Design
Center Stuttgart Award, W.
Germany, 1990
Order Code
Example: 29TS-27-DE
29TS Pensi table, square top
27 27� wide and deep
DE Disks, wrapped edge
Note:
Pensi Tables are part of a collection.
Please refer to Toledo chairs on page
118.
Specify:
1. Pattern number
2. Table size
3. Top finish selection
Jorge Pensi
Pensi Tables
Small Cafe Tables
description top w d h weight
29TS-27 Square café table Disks, wrapped edge 27 1 /2� 27 1 /2� 28 1 /4� 35 lbs.
Metallic Trespa,
natural black edge
27 1 /2� 27 1 /2� 28 1 /4� 32 lbs.
29TR-H-23 Bar-height café table Concentric circles,
wrapped edge
23 5 /8� 43 1 /3� 27 lbs.
Disks, wrapped edge 23 5 /8� 43 1 /3� 26 lbs.
Metallic Trespa,
natural black edge
23 5 /8� 43 1 /3� 24 lbs.
29TR-23 Round café table Concentric circles,
wrapped edge
Disks, wrapped
edgeband
Metallic Trespa,
natural black edge
23 3 /5� 28 1 /4� 26 lbs.
23 3 /5� 28 1 /4� 25 lbs.
23 5 /8� 28 1 /4� 23 lbs.
29TR-27 Round café table Disks, wrapped edge 27 1 /2� 28 1 /4� 31 lbs.
Ordering Information
Table top finishes:
Concentric circles, wrapped edge
(suffix CC)
Disks, wrapped edge (suffix DE)
Metallic laminate (suffix LM)
Note:
The Pensi Tables are available in the
United States only.
Metallic Trespa,
natural black edge
224
27 1 /2� 28 1 /4� 27 lbs.
KnollStudio 20-Day Program:
Pensi tables are available on the
KnollStudio 20-day program in a round
23� bar height size with concentric circle
finish and in the round 27� size with
disks finish. For specific information,
please consult pages 29-32.
Maintenance:
See pages 27-28.
Note:
The Pensi Table is Greenguard certified.
Construction
Top:
Two stainless steel finishes: acid-etched
pattern of concentric circles; sanded
pattern of scalloped, compact disk-like,
1 1 /4� wide circles; both with wrapped
edge. One metallic Trespa option with a
natural black phenolic edge. The Trespa
metallic (LM) top finish is UV resistant,
does not reflect heat, easy to clean and
made of recyclable materials. The Trespa
metallic (LM) top finish is ideal for
outdoor use.

pattern no.
29TS-27-DE $1,350.
29TS-27-LM 2,225.
29TR-H-23-CC 1,393.
29TR-H-23-DE 1,506.
29TR-H23-LM 2,033.
29TR-23-CC 1,112.
29TR-23-DE 1,226.
29TR-23-LM 1,710.
29TR-27-DE 1,350.
29TR-27-LM 2,225.
Base:
Anodized and polished cast aluminum
with 4 3 /8� pad-like feet. Four-star base on
cafe tables. Five-star base on bistro and
dining tables. The central column is a
polished and anodized aluminum round
tube. Internal weight for additional
stability. Black silicone non-scuffing
glides.
Outdoor use:
With proper preventative maintenance,
the Toledo Table is appropriate for
outdoor environments.
Pensi Tables are manufactured in Spain
by Amat-3.
Top edge details:
Concentric Circles (CC)
Square tables, Disks, wrapped edge (DE)
225
Round tables, Disks, wrapped edge (DE)
Square tables, Metallic laminate top,
phenolic black edge (LM)
KnollStudio
Round tables, metallic laminate top,
phenolic black edge (LM)

pattern no.
29TR-35-DE $3,140.
29TR-35-LM 3,748.
29TS-35-DE 3,140.
29TS-35-LM 3,748.
29TR-39-DE 3,630.
29TR-39-LM 5,965.
29TR-43-DE 3,839.
29TR-43-LM 6,530.
29TR-47-DE 4,082.
29TR-47-LM 6,646.
Base:
Anodized and polished cast aluminum
with 4 3 /8� pad-like feet. Four-star base on
cafe tables. Five-star base on bistro and
dining tables. The central column is a
polished and anodized aluminum round
tube. Internal weight for additional
stability. Black silicone non-scuffing
glides.
Outdoor use:
With proper preventative maintenance,
the Toledo Table is appropriate for
outdoor environments.
Pensi Tables are manufactured in Spain
by Amat-3.
Top edge details:
Concentric Circles (CC)
Square tables, Disks, wrapped edge (DE)
227
Round tables, Disks, wrapped edge (DE)
Square tables, Metallic laminate top,
phenolic black edge (LM)
KnollStudio
Round tables, metallic laminate top,
phenolic black edge (LM)

Designer(s):
Piiroinen, 2003
Order Code
Example: 23TR24-C-W
23TR24 Arena cafe table, 24�
C Crome
W White
Specify:
1. Pattern number
2. Column finish selection
3. Top finish
Piiroinen
Arena Cafe Tables
description w d h weight
23TR Round Cafe Table 24� 24� 27 1 /2� 44 lbs.
27� 27� 27 1 /2� 47 lbs.
36� 36� 27 1 /2� 73 lbs.
42� 42� 27 1 /2� 81 lbs.
23TS Square Cafe Table 24� 24� 27 1 /2� 63 lbs.
30� 30� 27 1 /2� 70 lbs.
23TRH Bar-height Round Cafe Table 24� 24� 41 1 /2� 46 lbs
27� 27� 41 1 /2� 49 lbs.
23TSH Bar-height Square Cafe Table 24� 24� 41 1 /2� 65 lbs.
27� 27� 41 1 /2� 69 lbs.
Ordering Information
Column Finish:
Chrome (C)
Silver grey paint (S)
Top finish:
White (W)
228
KnollStudio 20-Day Program:
The Arena table is available on the
20-day program in round 36� dining
height with chrome base and white
finish. Please consult pages 29-32.
Note:
The Arena Cafe Table is Greenguard
certified.
Construction
Top:
Top is laminate with a natural birch
edge. Top is .8� thick. Top is connected
to base via mounting plate.

pattern no. silver grey base chrome base
23TR24-( )-( ) $1,861. $1,933.
23TR27-( )-( ) 2,023. 2,090.
23TR36-( )-( ) 2,402. 2,470.
23TR42-( )-( ) 2,625. 2,695.
23TS24-( )-( ) 1,861. 1,933.
23TS30-( )-( ) 1,963. 2,029.
23TRH24-( )-( ) 1,861. 1,933.
23TRH27-( )-( ) 2,023. 2,090.
23TSH24-( )-( ) 1,861. 1,933.
23TSH27-( )-( ) 2,023. 2,090.
Base:
Base and mounting plates are solid
steel. Laser cut and always finished in a
silver grey powder coat finish. The
column is bolted to both the base plate
and mounting plate. The 24� and 27�
round tables comprise a 19.7�round base
plate. All other size tables, round and
square comprise a 25.5� round
baseplate. Column is 2.36� in diameter.
229
KnollStudio

Designer(s):
Warren Platner, 1962
Order Code
Example: 3710T-N-BRG
3710T Platner side table
N Nickel
BRG Bronze Glass
Note:
Platner dining and side tables are part of
a collection. Please refer to Platner
lounge seating on page 126 and Platner
coffee tables on page 232.
Specify:
1. Pattern number
2. Base finish option
3. Top option
Warren Platner
Dining and Side Tables
description base w w h weight top
3716T Dining table 20 3 /4� 53 3 /4� 27� 152 lbs. Clear glass
20 3 /4� 53 3 /4� 27� 152 lbs. Bronze glass
20 3 /4� 53 3 /4� 27� 254 lbs. Natural marble
20 3 /4� 53 3 /4� 27� 254 lbs. Coated marble
20 3 /4� 53 3 /4� 27� 254 lbs. Coated marble
20 3 /4� 53 3 /4� 27� 254 lbs. Coated marble
20 3 /4� 53 3 /4� 27� 267 lbs. Granite
20 3 /4� 53 3 /4� 27� 227 lbs. Veneer
20 3 /4� 53 3 /4� 27� 227 lbs. Pearwood
20 3 /4� 53 3 /4� 27� 254 lbs. Coated marble
20 3 /4� 53 3 /4� 27� 254 lbs. Coated marble
3710T Side table 13� 15 3 /4� 18� 14 lbs. Clear glass
13� 15 3 /4� 18� 14 lbs. Bronze glass
13� 15 3 /4� 18� 22 lbs. Natural marble
13� 15 3 /4� 18� 22 lbs. Coated marble
13� 15 3 /4� 18� 22 lbs. Coated marble
13� 15 3 /4� 18� 22 lbs. Coated marble
13� 15 3 /4� 18� 22 lbs. Coated marble
13� 15 3 /4� 18� 22 lbs. Coated marble
13� 15 3 /4� 18� 15 lbs. Veneer
13� 15 3 /4� 18� 15 lbs. Pearwood
13� 15 3 /4� 18� 25 lbs. Granite
Ordering Information
Frame:
Polished Nickel (N)
Metallic Bronze (BRM)
Glass top finishes:
Clear Glass (suffix G2)
Bronze Glass (suffix BRG)
Coated marble top finishes:
Arabescatto: white-grey (suffix MA)
Carrara: white-grey (suffix GC)
Calacatta: white-grey/beige (suffix MC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
230
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Veneer finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood finish:
Pearwood (suffix P)
Maintenance:
See pages 27-28.
KnollStudio 20-Day Program:
The Platner side table 3710 in selected
finishes are available on the KnollStudio
20-Day program. For specific
information, consult pages 29-32.
Note: Marbles with a polyester coating
will yellow over time.
The Platner Tables with glass,
veneer and natural marble tops are
Greenguard certifed.

pattern no. polished nickel metallic bronze
3716T-( )-G2 $4,578. $4,853.
3716T-( )-BRG 4,807. 5,095.
3716T-( )-(NGC, NGE) 6,717. 7,781.
3716T-( )-(GC, GB, GE) 7,532. 8,597.
3716T-( )-(MN, MA) 8,141. 8,630.
3716T-( )-(MC) 8,480. 8,990.
3716T-( )-(GA) 9,066. 10,131.
3716T-( )-(LO, LWA, D, V314) 9,679. 10,259.
3716T-( )-(P) 10,475. 11,103.
3716T-( )-(MV) 10,918. 11,572.
3716T-( )-(MW) 12,407. 13,150.
3710T-( )-G2 1,064. 1,424.
3710T-( )-BRG 1,117. 1,495.
3710T-( )-(NGC, NGE) 1,445. 1,828.
3710T-( )-(GC, GB, GE) 1,560. 1,943.
3710T-( )-(MN, MA) 1,747. 1,853.
3710T-( )-(MV) 1,770. 1,876.
3710T-( )-(MC) 1,835. 1,946.
3710T-( )-(MW) 2,036. 2,157.
3710T-( )-(LO, LWA, D, V314) 2,432. 2,577.
3710T-( )-(P) 2,613. 2,769.
3710T-( )-(GA) 2,961. 3,344.
Construction
Frame:
Vertical steel wire rods welded to
circular horizontal and edge-framing
rods. Finish in bright nickel with a clear
lacquer protection or in a painted
metallic bronze.
Base:
Clear plastic extrusion ring for smooth
bottom surface.
Glass top:
3/8� thick tempered glass.
Edge detail for glass:
Marble Top:
All marble tops feature a bevel edge. 3 /4�
thick coated marble tops have
transparent polyester coating to help
eliminate use-associated stains. 3 /4� thick
natural marble tops and granite tops have
protective sealer. Larger tops have
subtop that fits into base opening to
ensure stability.
Marble edge detail:
231
Wood Top:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various toned
or stained finishes for light oak, light
walnut, reff dark cherry and pearwood.
Ebonized walnut features a black stain
on walnut substrate. All tops are 1 1 /16�
thick. Edges are 1 /4� solid wood to match
face veneer. Wood tops are weighted
with plates to ensure stability.
KnollStudio

Designer(s):
Warren Platner, 1962
Order Code
Example: 3712T-BRM-NB
3712T Platner coffee table
BRM Metallic Bronze
NGE Emperador Dark Marble
Note:
Platner coffee table are part of a
collection. Please refer to Platner lounge
seating on page 126 and Platner dining
and side tables on page 230.
Specify:
1. Pattern number
2. Base finish option
3. Top option
Warren Platner
Coffee Tables
description base w w h weight top
3712T Coffee table 18 1 /2� 36� 15 1 /4� 58 lbs. Clear glass
18 1 /2� 36� 15 1 /4� 58 lbs. Bronze glass
18 1 /2� 36� 15 1 /4� 107 lbs. Natural marble
18 1 /2� 36� 15 1 /4� 107 lbs. Coated marble
18 1 /2� 36� 15 1 /4� 107 lbs. Coated marble
18 1 /2� 36� 15 1 /4� 107 lbs. Coated marble
18 1 /2� 36� 15 1 /4� 107 lbs. Granite
18 1 /2� 36� 15 1 /4� 107 lbs. Coated marble
18 1 /2� 36� 15 1 /4� 107 lbs. Coated marble
18 1 /2� 36� 15 1 /4� 96 lbs. Natural veneer
18 1 /2� 36� 15 1 /4� 96 lbs. Pearwood
3714T Coffee table 18 1 /2� 42 1 /4� 15 1 /4� 71 lbs. Clear glass
18 1 /2� 42 1 /4� 15 1 /4� 71 lbs. Bronze glass
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Natural marble
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Coated marble
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Coated marble
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Coated marble
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Granite
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Coated marble
18 1 /2� 42 1 /4� 15 1 /4� 139 lbs. Coated marble
18 1 /2� 42 1 /4� 15 1 /4� 108 lbs. Veneer
18 1 /2� 42 1 /4� 15 1 /4� 108 lbs. Pearwood
Ordering Information
Frame:
Polished Nickel (N)
Metallic Bronze (BRM)
Glass top finishes:
Clear Glass (suffix G2)
Bronze Glass (suffix BRG)
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Carrara: white-grey (suffix GC)
Calacatta: white-grey/beige (suffix MC)
Emperador Dark: dark brown (suffix GE)
Empire Stripe: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
232
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Veneer finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood finish:
Pearwood (suffix P)
Maintenance:
See pages 27-28.
KnollStudio 20-Day Program:
The Platner coffe table 3712 and 3714 in
selected finishes are available on the
KnollStudio 20-Day program. For
specific information, consult pages
29-32.
Note:
Marbles with a polyester coating will
yellow over time.
The Platner Tables with glass,
veneer and natural marble tops are
Greenguard certifed.

pattern no.
KnollStudio
642TR-KC-KC $1,592.
642TR-KE-D 1,655.
642TR-LWT-LWT 1,738.
614TS-KC-KC 740.
614TS-KE-D 769.
614TS-LWT-LWT 808.
618TR-KC-KC 792.
618TR-KE-D 823.
618TR-LWT-LWT 865.
643TA-KC-KC 1,361.
643TA-KE-D 1,415.
643TA-LWT-LWT 1,486.
235

Designer(s):
Jens Risom, 1943
Order Code
Example: 643TAS-HB-HL
643TAS Child’s Risom Amoeba
table
HB Honey Beech
HL Honey laminate
Note:
The Child’s Risom Amoeba table is part
of a Collection. Please refer to the
Child’s Risom side chairs on page 140.
Specify:
1. Pattern number
2. Base finish selection
3. Top finish selection
Jens Risom
Child’s Amoeba Table
description w d h weight base top
643TAS Child’s Amoeba shaped coffee table 42� 32� 20� 32 lbs. Honey
Beech
Ordering Information
Base finish:
Honey Beech (suffix HB)
Top finish:
Honey laminate (suffix HL)
236
Shipping information:
Child’s Risom Amoeba table is shipped
knocked down with top and legs in one
box. Simple field assembly required.
Maintenance:
See pages 27-28.
Note:
The Child’s Risom Amoeba table is
compliant to the Consumer Product
Safety Improvement Act of 2008 for
Children’s Products, 16 C.F.R. 1303,
CPSIA Title 1 Section 101 for Total Lead
in Substrates and Surface Coatings.
Honey
laminate
Construction
Legs and aprons:
Select European Beech hardwood with a
toned natural finish. Mortise and tenon
construction.
Top:
3 /4� thick wood grain laminate top is 3-ply
construction with medium density
fiberboard core and plastic laminate
backer. Honey laminate features a
Beech grain pattern.
Finish:
Toned catalyzed lacquer finish.

pattern no.
KnollStudio
643TAS-HB-HL $622.
237

pattern no.
172TR-F2-(1, 2, PL) $2,481.
172TR-(NGC, NGE)-(1, 2, PL) 3,115.
172TR-(GC, GB, GE)-(1, 2, PL) 3,523.
172TR-(MN, MA)-(1, 2, PL) 3,787.
172TR-(MC)-(1, 2, PL) 4,147.
172TR-(LO, LWA, D, V314)-(1, 2, PL) 4,195.
172TR-(RO, TK)-(1, 2, PL) 4,269.
172TR-(P)-(1, 2, PL) 4,541.
172TR-(GA)-(1, 2, PL) 4,652.
172TR-(MV)-(1, 2, PL) 5,552.
172TR-(MW)-(1, 2, PL) 6,385.
173TR-F2-(1, 2, PL) 2,646.
173TR-(NGC, NGE)-(1, 2, PL) 3,815.
173TR-(GC, GB, GE)-(1, 2, PL) 4,338.
173TR-(MN, MA)-(1, 2, PL) 4,416.
173TR-(RO, TK)-(1, 2, PL) 4,675.
173TR-(MC)-(1, 2, PL) 4,839.
173TR-(LO, LWA, D, V314)-(1, 2, PL) 5,045.
173TR-(P)-(1, 2, PL) 5,491.
173TR-(GA)-(1, 2, PL) 5,668.
173TR-(MV)-(1, 2, PL) 5,949.
173TR-(MW)-(1, 2, PL) 6,842.
176TR-F2-(1, 2, PL) 2,839.
176TR-(NGC, NGE)-(1, 2, PL) 4,055.
176TR-(GC, GB, GE)-(1, 2, PL) 4,660.
176TR-(MN, MA)-(1, 2, PL) 4,743.
176TR-(RO, TK)-(1, 2, PL) 4,957.
176TR-(MC)-(1, 2, PL) 5,198.
176TR-(LO, LWA, D, V314)-(1,2, PL) 5,647.
176TR-(P)-(1, 2, PL) 6,167.
176TR-(MV)-(1, 2, PL) 6,345.
176TR-(GA)-(1,2, PL) 6,481.
176TR-(MW)-(1, 2, PL) 7,297.
Marbles with a polyester coating will
yellow over time.
Saarinen Dining Tables with Laminate,
Natural Marble, Veneer or Granite tops
are Greenguard certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Measurements:
172TR, 173TR, 176TR: 20� diameter
164TR, 165TR: 25.984� diameter
239
Marble and Laminate Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops
have transparent polyester coating to
help eliminate use-associated stains. 3 /4�
thick natural marble tops and granite
tops have protective sealer. Laminate
tops are 1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Wood Top:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned stains. All tops are 1 1 /16� thick
with the exception of 164TR and 165TR
which are 1 1 /4� thick. Edges are 1 /4� solid
wood to match face veneer.

Designer(s):
Eero Saarinen, 1957
Order Code
Example: 176TR-MN-1
176TR Saarinen dining table
MN Nero Marquina Marble
1 Black
Note:
Saarinen tables are part of a collection.
Please refer to Saarinen side chairs,
lounge seating, and executive chairs on
beginning on page 144.
Specify:
1. Pattern number
2. Top selection
3. Base finish selection
Eero Saarinen
Round Dining Tables
description w d h weight top
164TR Large round table, dining height 54� 28 1 /4� 102 lbs. Laminate
54� 28 1 /4� 203 lbs. Natural marble
54� 28 1 /4� 203 lbs. Coated marble
54� 28 1 /4� 203 lbs. Coated marble
54� 28 1 /4� 103 lbs. Veneer
54� 28 1 /4� 203 lbs. Coated marble
54� 28 1 /4� 103 lbs. Veneer
54� 28 1 /4� 103 lbs. Pearwood
54� 28 1 /4� 218 lbs. Granite
54� 28 1 /4� 203 lbs. Coated marble
54� 28 1 /4� 203 lbs. Coated marble
165TR Large round table, dining height 60� 28 1 /4� 115 lbs. Laminate
60� 28 1 /4� 244 lbs. Natural marble
60� 28 1 /4� 244 lbs. Coated marble
60� 28 1 /4� 121 lbs. Veneer
60� 28 1 /4� 121 lbs. Veneer
60� 28 1 /4� 121 lbs. Pearwood
60� 28 1 /4� 263 lbs. Granite
60� 28 1 /4� 244 lbs. Coated marble
60� 28 1 /4� 244 lbs. Coated marble
Ordering Information
Laminate top finish:
White (suffix F2)
Veneer finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood (suffix P)
Rosewood (suffix RO)
Teak (suffix TK)
Base finishes:
Black (suffix 1)
White (suffix 2)
Platinum (suffix PL)
240
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV) *
White Extra: white-white/grey
(suffix MW) *
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
* Note:
Verdi Alpi and White Extra may not be
specified for 165TR.
KnollStudio 20-Day Program:
Saarinen dining table 164TR, 173TR,
176TR is available on the KnollStudio
20-Day program with a white base and
white laminate top. For specific
information, consult pages 29-32.
Maintenance:
See pages 27-28.
Note:
Top and base shipped in separate
packages. The Knoll logo is stamped into
the base of the Saarinen tables. Tops
have nameplate wih designer’s signature.
Not suitable for outdoor use.

pattern no.
164TR-F2-(1,2, PL) $3,782.
164TR-(NGC, NGE)-(1, 2, PL) 5,429.
164TR-(GC, GB, GE)-(1, 2, PL) 6,244.
164TR-(MN, MA)-(1, 2, PL) 6,377.
164TR-(RO, TK)-(1, 2, PL) 6,920.
164TR-(MC)-(1, 2, PL) 6,989.
164TR-(LO, LWA, D, V314)-(1, 2, PL) 7,073.
164TR-(P)-(1, 2, PL) 7,696.
164TR-(GA)-(1, 2, PL) 7,852.
164TR-(MV)-(1, 2, PL) 8,571.
164TR-(MW)-(1, 2, PL) 9,856.
165TR-F2-(1, 2, PL) 5,905.
165TR-(NGC, NGE)-(1, 2, PL) 6,222.
165TR-(GC, GB, GE)-(1, 2, PL) 7,228.
165TR-(RO, TK)-(1, 2, PL) 7,367.
165TR-(LO, LWA, D, V314)-(1, 2, PL) 7,689.
165TR-(P)-(1, 2, PL) 8,350.
165TR-(GA)-(1, 2, PL) 9,426.
165TR-(MN, MA)-(1, 2, PL) 9,812.
165TR-(MC)-(1, 2, PL) 10,744.
Marbles with a polyester coating will
yellow over time.
Saarinen Dining Tables with Laminate,
Natural Marble, Veneer or Granite tops
are Greenguard certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Measurements:
172TR, 173TR, 176TR: 20� diameter
164TR, 165TR: 25.984� diameter
241
Marble and Laminate Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops
have transparent polyester coating to
help eliminate use-associated stains. 3 /4�
thick natural marble tops and granite
tops have protective sealer. Laminate
tops are 1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Wood Top:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned stains. All tops are 1 1 /16� thick
with the exception of 164TR and 165TR
which are 1 1 /4� thick. Edges are 1 /4� solid
wood to match face veneer.

Designer(s):
Eero Saarinen, 1957
Order Code
Example: 174TO-MA-PL
174TO Saarinen dining table
MA Arabescato Marble
PL Platinum
Note:
Saarinen tables are part of a collection.
Please refer to Saarinen side chairs,
lounge seating, and executive chairs on
beginning on page 144.
Specify:
1. Pattern number
2. Top selection
3. Base finish selection
Eero Saarinen
Oval Dining Tables
description w d h weight top
174TO Medium oval table, dining height 78� 47 3 /4� 28 1 /4� 131 lbs. Laminate
78� 47 3 /4� 28 1 /4� 259 lbs. Natural marble
78� 47 3 /4� 28 1 /4� 259 lbs. Coated marble
78� 47 3 /4� 28 1 /4� 131 lbs. Veneer
78� 47 3 /4� 28 1 /4� 131 lbs. Veneer
78� 47 3 /4� 28 1 /4� 259 lbs. Coated marble
78� 47 3 /4� 28 1 /4� 229 lbs. Granite
78� 47 3 /4� 28 1 /4� 131 lbs. Pearwood
78� 47 3 /4� 28 1 /4� 259 lbs. Coated marble
78� 47 3 /4� 28 1 /4� 259 lbs. Coated marble
78� 47 3 /4� 28 1 /4� 259 lbs. Coated marble
175TO Large oval table, dining height 96� 54� 28 1 /4� 169 lbs. Laminate
96� 54� 28 1 /4� 348 lbs. Natural marble
96� 54� 28 1 /4� 168 lbs. Veneer
96� 54� 28 1 /4� 348 lbs. Coated marble
96� 54� 28 1 /4� 168 lbs. Veneer
96� 54� 28 1 /4� 348 lbs. Coated marble
96� 54� 28 1 /4� 168 lbs. Pearwood
96� 54� 28 1 /4� 374 lbs. Granite
96� 54� 28 1 /4� 348 lbs. Coated marble
96� 54� 28 1 /4� 348 lbs. Coated marble
96� 54� 28 1 /4� 348 lbs. Coated marble
Ordering Information
Laminate top finish:
White (suffix F2)
Veneer finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood (suffix P)
Rosewood (suffix RO)
Teak (suffix TK)
242
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Base finishes:
Black (suffix 1)
White (suffix 2)
Platinum (suffix PL)

pattern no.
174TO-F2-(1, 2, PL) $6,512.
174TO-(NGC, NGE)-(1, 2, PL) 6,650.
174TO-(GC, GB, GE)-(1, 2, PL) 7,790.
174TO-(RO, TK)-(1, 2, PL) 8,287.
174TO-(LO, LWA, D, V314)-(1, 2, PL) 9,670.
174TO-(MN, MA)-(1, 2, PL) 10,069.
174TO-(GA)-(1, 2, PL) 10,086.
174TO-(P)-(1, 2, PL) 10,524.
174TO-(MC)-(1, 2, PL) 11,025.
174TO-(MV)-(1, 2,PL) 14,789.
174TO-(MW)-(1, 2,PL) 17,007.
175TO-F2-(1, 2, PL) 7,370.
175TO-(NGC, NGE)-(1, 2, PL) 8,362.
175TO-(RO, TK)-(1, 2, PL) 9,160.
175TO-(GC, GB, GE)-(1, 2, PL) 9,947.
175TO-(LO, LWA, D, V314)-(1, 2, PL) 10,766.
175TO-(MN, MA)-(1, 2, PL) 11,564.
175TO-(P)-(1, 2, PL) 11,752.
175TO-(GA)-(1, 2, PL) 12,185.
175TO-(MC)-(1, 2, PL) 12,662.
175TO-(MV)-(1, 2, PL) 16,994.
175TO-(MW)-(1, 2, PL) 19,543.
Maintenance:
See pages 27-28.
Note:
Top and base shipped in separate
packages. The Knoll logo is stamped into
the base of the Saarinen tables. Tops
have nameplate with designer’s
signature. Not suitable for outdoor
use.
Marbles with a polyester coating will
yellow over time.
Saarinen Dining Tables with Laminate,
Natural Marble, Veneer or Granite tops
are Greenguard certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Measurements:
174TO, 175TO: width is 31.3� and depth
is 23�
243
Marble and Laminate Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops have
transparent polyester coating to help
eliminate use-associated stains. 3 /4� thick
natural marble tops and granite tops have
protective sealer. Laminate tops are
1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Veneer Tops:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned stains. Oval dining tops are 1 1 /4�
thick. Edges are 1 /4� solid wood to match
face veneer.

Designer(s):
Eero Saarinen, 1957
Order Code
Example: 160TR-MW-2
161TO Saarinen side table
MW White Extra Marble
2 White
Note:
Saarinen tables are part of a collection.
Please refer to Saarinen side chairs,
lounge seating and executive chairs on
pages 144.
Specify:
1. Pattern number
2. Top selection
3. Base finish selection
Eero Saarinen
Round End and Coffee Tables
description w d h weight top
160TR Small round side table, intermediate
height
163TR Small round table, intermediate
height
16 1 /4� 20� 12 lbs. Laminate
16 1 /4� 20� 21 lbs. Natural marble
16 1 /4� 20� 21 lbs. Coated marble
16 1 /4� 20� 21 lbs. Coated marble
16 1 /4� 20� 21 lbs. Coated marble
16 1 /4� 20� 21 lbs. Coated marble
16 1 /4� 20� 21 lbs. Coated marble
16 1 /4� 20� 25 lbs. Granite
16 1 /4� 20� 14 lbs. Veneer
16 1 /4� 20� 14 lbs. Pearwood
16 1 /4� 20� 14 lbs. Veneer
20� 20� 16 lbs. Laminate
20� 20� 30 lbs. Natural marble
20� 20� 30 lbs. Coated marble
20� 20� 30 lbs. Coated marble
20� 20� 30 lbs. Coated marble
20� 20� 30 lbs. Coated marble
20� 20� 17 lbs. Veneer
20� 20� 30 lbs. Coated marble
20� 20� 33 lbs. Granite
20� 20� 17 lbs. Pearwood
20� 20� 17 lbs. Veneer
169TR Small round side table, low level 20� 13 3 /4� 14 lbs. Laminate
20� 13 1 /4� 29 lbs. Natural marble
20� 13 3 /4� 29 lbs. Coated marble
20� 13 3 /4� 29 lbs. Coated marble
20� 13 3 /4� 29 lbs. Coated marble
20� 13 3 /4� 29 lbs. Coated marble
20� 13 3 /4� 29 lbs. Coated marble
20� 13 3 /4� 16 lbs. Veneer
20� 13 3 /4� 32 lbs. Granite
20� 13 3 /4� 16 lbs. Pearwood
20� 13 3 /4� 16 lbs. Veneer
Ordering Information
Laminate top finish:
White (suffix F2)
Veneer Finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood (suffix P)
Rosewood (suffix RO)
Teak (suffix TK)
244
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Base finishes:
Black (suffix 1)
White (suffix 2)
Platinum (suffix PL)
KnollStudio 20-Day Program:
Saarinen 169TR and 163TR side tables
are available on the KnollStudio 20-day
program in select finishes. For specific
information, consult pages 29-32.

pattern no.
160TR-F2-(1, 2, PL) $764.
160TR-(NGC, NGE)-(1, 2, PL) 920.
160TR-(GC, GB, GE)-(1, 2, PL) 1,009.
160TR-(MN, MA)-(1, 2, PL) 1,060.
160TR-(MC)-(1, 2, PL) 1,111.
160TR-(MV)-(1, 2, PL) 1,323.
160TR-(MW)-(1, 2, PL) 1,470.
160TR-(GA)-(1, 2, PL) 1,751.
160TR-(LO, LWA, D, V314)-(1, 2, PL) 1,803.
160TR-(P)-(1, 2, PL) 2,054.
160TR-(RO, TK)-(1, 2, PL) 2,449.
163TR-F2-(1, 2, PL) 900.
163TR-(NGC, NGE)-(1, 2, PL) 1,004.
163TR-(GC, GB, GE)-(1, 2, PL) 1,131.
163TR-(MN, MA)-(1, 2, PL) 1,220.
163TR-(MC)-(1, 2, PL) 1,280.
163TR-(MV)-(1, 2, PL) 1,736.
163TR-(LO, LWA, D, V314)-(1, 2, PL) 1,917.
163TR-(MW)-(1, 2, PL) 1,928.
163TR-(GA)-(1, 2, PL) 2,074.
163TR-(P)-(1, 2, PL) 2,191.
163TR-(TK, RO)-(1, 2, PL) 2,535.
169TR-F2-(1,2, PL) 826.
169TR-(NGC, NGE)-(1, 2, PL) 979.
169TR-(GC, GB, GE)-(1, 2, PL) 1,097.
169TR-(MN, MA)-(1, 2, PL) 1,185.
169TR-(MC)-(1, 2, PL) 1,245.
169TR-(MV)-(1, 2, PL) 1,574.
169TR-(MW)-(1, 2, PL) 1,748.
169TR-(LO, LWA, D, V314)-(1, 2, PL) 2,005.
169TR-(GA)-(1, 2, PL) 2,034.
169TR-(P)-(1, 2, PL) 2,282.
169TR-(RO, TK)-(1, 2, PL) 2,595.
Maintenance:
See pages 27-28.
Note:
Top and base shipped in separate
packages. The Knoll logo is stamped into
the base of the Saarinen tables. Tops
have a nameplate with the designers
signature. Not suitable for outdoor
use.
Marbles with a polyester coating will
yellow over time.
Saarinen Round End and Coffee Tables
with Laminate, Natural Marble,
Veneer or Granite tops are Greenguard
certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Diameters:
160TR, 163TR: 10.7�
162TR: 17�
169TR: 13.5�
245
Laminate and Marble Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops have
transparent polyester coating to help
eliminate use-associated stains. 3 /4� thick
natural marble tops and granite tops have
protective sealer. Laminate tops are
1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Veneer Tops:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned or stains. All tops are 1 1 /16�
thick.

Designer(s):
Eero Saarinen, 1957
Order Code
Example: 160TR-MW-2
161TO Saarinen side table
MW White Extra Marble
2 White
Note:
Saarinen tables are part of a collection.
Please refer to Saarinen side chairs,
lounge seating and executive chairs on
pages 144.
Specify:
1. Pattern number
2. Top selection
3. Base finish selection
Eero Saarinen
Round End and Coffee Tables
description w d h weight top
162TR Medium round coffee table, low level 35 3 /4� 15 1 /4� 40 lbs. Laminate
35 3 /4� 15 1 /4� 88 lbs. Natural marble
35 3 /4� 15 1 /4� 88 lbs. Coated marble
35 3 /4� 15 1 /4� 43 lbs. Veneer
35 3 /4� 15 1 /4� 43 lbs. Veneer
35 3 /4� 15 1 /4� 88 lbs. Coated marble
35 3 /4� 15 1 /4� 43 lbs. Pearwood
35 3 /4� 15 1 /4� 88 lbs. Coated marble
35 3 /4� 15 1 /4� 96 lbs. Granite
35 3 /4� 15 1 /4� 88 lbs. Coated marble
35 3 /4� 15 1 /4� 88 lbs. Coated marble
Ordering Information
Laminate top finish:
White (suffix F2)
Veneer Finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood (suffix P)
Rosewood (suffix RO)
Teak (suffix TK)
246
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Base finishes:
Black (suffix 1)
White (suffix 2)
Platinum (suffix PL)
KnollStudio 20-Day Program:
Saarinen 169TR and 163TR side tables
are available on the KnollStudio 20-day
program in select finishes. For specific
information, consult pages 29-32.

pattern no.
162TR-F2-(1, 2, PL) $2,077.
162TR-(NGC, NGE)-(1, 2, PL) 2,357.
162TR-(GC, GB, GE)-(1, 2, PL) 2,765.
162TR-(LO, LWA, D, V314)-(1, 2, PL) 3,059.
162TR-(RO, TK)-(1, 2, PL) 3,463.
162TR-(MN, MA)-(1, 2, PL) 3,487.
162TR-(P)-(1, 2, PL) 3,493.
162TR-(MC)-(1, 2, PL) 3,662.
162TR-(GA)-(1, 2, PL) 4,084.
162TR-(MV)-(1, 2, PL) 4,746.
162TR-(MW)-(1, 2, PL) 5,274.
Maintenance:
See pages 27-28.
Note:
Top and base shipped in separate
packages. The Knoll logo is stamped into
the base of the Saarinen tables. Tops
have a nameplate with the designers
signature. Not suitable for outdoor
use.
Marbles with a polyester coating will
yellow over time.
Saarinen Round End and Coffee Tables
with Laminate, Natural Marble,
Veneer or Granite tops are Greenguard
certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Diameters:
160TR, 163TR: 10.7�
162TR: 17�
169TR: 13.5�
247
Laminate and Marble Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops have
transparent polyester coating to help
eliminate use-associated stains. 3 /4� thick
natural marble tops and granite tops have
protective sealer. Laminate tops are
1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Veneer Tops:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned or stains. All tops are 1 1 /16�
thick.

Designer(s):
Eero Saarinen, 1957
Order Code
Example: 161TO-NGC-2
161TO Saarinen side table
NGC Carrara Marble
2 White
Note:
Saarinen tables are part of a collection.
Please refer to Saarinen side chairs,
lounge seating and executive chairs on
pages 144.
Specify:
1. Pattern number
2. Top selection
3. Base finish selection
Eero Saarinen
Oval End and Coffee Tables
description w d h weight top
161TO Oval side table, intermediate height 22 1 /2� 15� 20� 15 lbs. Laminate
22 1 /2� 15� 20� 28 lbs. Natural marble
22 1 /2� 15� 20� 28 lbs. Coated marble
22 1 /2� 15� 20� 28 lbs. Coated marble
22 1 /2� 15� 20� 28 lbs. Coated marble
22 1 /2� 15� 20� 28 lbs. Coated marble
22 1 /2� 15� 20� 28 lbs. Coated marble
22 1 /2� 15� 20� 16 lbs. Veneer
22 1 /2� 15� 20� 29 lbs. Granite
22 1 /2� 15� 20� 16 lbs. Pearwood
22 1 /2� 15� 20� 16 lbs. Veneer
162TO Oval coffee table, low level 41 1 /4� 27 1 /2� 15 1 /4� 37 lbs. Laminate
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Natural marble
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Coated marble
41 1 /4� 27 1 /2� 15 1 /4� 40 lbs. Veneer
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Coated marble
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Coated marble
41 1 /4� 27 1 /2� 15 1 /4� 40 lbs. Veneer
41 1 /4� 27 1 /2� 15 1 /4� 40 lbs. Pearwood
41 1 /4� 27 1 /2� 15 1 /4� 86 lbs. Granite
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Coated marble
41 1 /4� 27 1 /2� 15 1 /4� 80 lbs. Coated marble
Ordering Information
Laminate top finish:
White (suffix F2)
Veneer Finishes:
Light Oak (suffix LO)
Light Walnut (suffix LWA)
Ebonized Walnut (suffix D)
Reff Dark Cherry (suffix V314)
Pearwood (suffix P)
Rosewood (suffix RO)
Teak (suffix TK)
248
Coated marble top finishes:
Arabescato: white-grey (suffix MA)
Calacatta: white-grey/beige (suffix MC)
Carrara: white-grey (suffix GC)
Emperador Dark: dark brown (suffix GE)
Empire Beige: beige (suffix GB)
Nero Marquina: black (suffix MN)
Verde Alpi: green (suffix MV)
White Extra: white-white/grey
(suffix MW)
Natural marble top finishes:
Calacatta: white-grey/beige (contact your
KnollStudio representative for suffix and
pricing)
Carrara: white-grey (suffix NGC)
Emperador Dark: dark brown (suffix
NGE)
Granite top finish:
Black Andes: black (suffix GA)
Base finishes:
Black (suffix 1)
White (suffix 2)
Platinum (suffix PL)
KnollStudio 20-Day Program:
Saarinen 162TO coffee table is available
on the KnollStudio 20-day program in
select finishes. For specific information,
consult pages 30-0.

pattern no.
161TO-F2-(1, 2, PL) $922.
161TO-(NGC, NGE)-(1, 2, PL) 926.
161TO-(GC, GB, GE)-(1, 2, PL) 1,015.
161TO-(MN, MA)-(1, 2, PL) 1,044.
161TO-(MC)-(1, 2, PL) 1,096.
161TO-(MV)-(1, 2, PL) 1,241.
161TO-(MW)-(1, 2, PL) 1,379.
161TO-(LO, LWA, D, V314)-(1, 2, PL) 2,003.
161TO-(GA)-(1, 2, PL) 2,019.
161TO-(P)-(1, 2, PL) 2,290.
161TO-(RO, TK)-(1, 2, PL) 2,488.
162TO-F2-(1, 2, PL) 2,086.
162TO-(NGC, NGE)-(1, 2, PL) 2,636.
162TO-(GC, GB, GE)-(1, 2, PL) 2,993.
162TO-(LO, LWA, D, V314)-(1, 2, PL) 3,059.
162TO-(MN, MA)-(1, 2, PL) 3,145.
162TO-(MC)-(1, 2, PL) 3,303.
162TO-(RO, TK)-(1, 2, PL) 3,381.
162TO-(P)-(1, 2, PL) 3,494.
162TO-(GA)-(1, 2, PL) 4,162.
162TO-(MV)-(1, 2, PL) 4,300.
162TO-(MW)-(1, 2, PL) 4,778.
Maintenance:
See pages 27-28.
Note:
Top and base shipped in separate
packages. The Knoll logo is stamped into
the base of the Saarinen tables. Tops
have a nameplate with the designers
signature. Not suitable for outdoor
use.
Marbles with a polyester coating will
yellow over time.
Saarinen Oval End and Coffee Tables
with Laminate, Natural Marble,
Veneer or Granite tops are Greenguard
certified.
Construction
Base:
Heavy molded cast aluminum,
strap-polished. Black and white bases
are coated in a tough, abrasion-resistant
Rilsan finish. Platinum bases consist of a
highly resilient polyurethane enamel wet
coat with a clear satin finish.
Base Diameters:
161TO: 10.7�
162TO: 17�
249
Laminate and Marble Tops:
Bevel-edged satin smooth laminate or
marble. 3 /4� thick coated marble tops have
transparent polyester coating to help
eliminate use-associated stains. 3 /4� thick
natural marble tops and granite tops have
protective sealer. Laminate tops are
1.06� thick.
Laminate edge detail:
Marble edge detail:
KnollStudio
Veneer Tops:
Tops are constructed of veneered
medium density fiberboard with a
cathedral grain pattern in various clear
or toned or stains. All tops are 1 1 /16�
thick.

Designer(s):
Peter Shelton and Lee Mindel,
2006
Order Code
Example: SM93-2-S2
SM93 Shelton Mindel square
coffee table
2 White
S2 Painted White Starphire
Note:
The SM tables are part of a collection.
Please refer to SM side chair on page
152 and SM1 and SM2 lounge collection
on pages 154 and 156.
Shelton Mindel
SM Tables
description w d h
SM9 Shelton Mindel side table 24� 24� 18�
SM91 Shelton Mindel small coffee table 42� 24� 14�
SM92 Shelton Mindel large coffee table 48� 30� 14�
SM93 Shelton Mindel square coffee table 40� 40� 14�
Ordering Information
Specify:
1. Pattern number
2. Base option
3. Top option
Shipping:
Top and base of SM tables will ship in
separate packages.
250
Glass top finishes:
Clear glass (suffix G2)
Painted White Starphire (suffix S2)
Slate top finish:
Natural black (suffix SN)
Base finishes:
White (suffix 2)
Stainless Steel (suffix S)
Maintenance:
See pages 26-27.
Note:
The SM Table Collection is Greenguard
certified.
For weight information, please contact
your KnollStudio representative.

Designer(s):
Vignelli Design, 1994
Order Code
Example: 49TS-30-SN-1
49TS-30 PaperClip table, square, 30�
SN Natural Black slate
1 Black
The Vignelli PaperClip Tables are part of
a collection. Please refer to Vignelli
Handkerchief Chairs on page 168.
Specify:
1. Pattern number
2. Top finish selection
3. Urethane edge detail (laminate tops
only)
4. Leg finish selection
Vignelli Associates
PaperClip Cafe Tables
description w d h weight top
49TS-30 Square table, small 30� 30� 28 1 /8� 37 lbs. Laminate
30� 30� 28 1 /8� 51 lbs. Clear glass
30� 30� 28 1 /8� 51 lbs. White glass
30� 30� 28 1 /8� 72 lbs. Slate
49TS-36 Square table, medium 36� 36� 28 1 /8� 55 lbs. Laminate
36� 36� 28 1 /8� 75 lbs. Clear glass
36� 36� 28 1 /8� 75 lbs. White glass
36� 36� 28 1 /8� 105 lbs. Slate
49TS-42 Square table, large 42� 42� 28 1 /8� 75 lbs. Laminate
42� 42� 28 1 /8� 103 lbs. Clear glass
42� 42� 28 1 /8� 103 lbs. White glass
42� 42� 28 1 /8� 144 lbs. Slate
49TR-36 Round table, small 36� 28 1 /8� 41 lbs. Laminate
36� 28 1 /8� 57 lbs. Clear glass
36� 28 1 /8� 57 lbs. White glass
36� 28 1 /8� 80 lbs. Slate
49TR-42 Round table, medium 42� 28 1 /8� 58 lbs. Laminate
42� 28 1 /8� 80 lbs. Clear glass
42� 28 1 /8� 80 lbs. White glass
42� 28 1 /8� 112 lbs. Slate
49TR-48 Round table, large 48� 28 1 /8� 76 lbs. Laminate
48� 28 1 /8� 106 lbs. Clear glass
48� 28 1 /8� 106 lbs. White glass
48� 28 1 /8� 147 lbs. Slate
Ordering Information
Laminate top finishes:
Bright White (suffix 118)
Light Grey (suffix L)
Fog (suffix 128)
Jet Black (suffix 111)
252
Urethane edge finishes:
Light Grey (suffix LG)
Medium Grey (suffix MG)
Black (suffix BL)
Glass top finishes:
Clear (suffix G2)
White (suffix G3)
Slate top finish:
Natural Black (suffix SN)
Painted base finishes:
Light Metallic Grey (suffix U)
Medium Metallic Grey (suffix 612)
Outdoor Powder Coat Finish:
Black (suffix 1)
Chrome base finish:
Polished Chrome (suffix C)
*For finishes specified prior to July
2005, please consult page 25.
Maintenance:
See pages 27-28.
Note:
The PaperClip Table is Greenguard
certified.

pattern no.
Painted/
black base Pol. chrome base
49TS-30-( )-( )-( ) $1,679. $1,866.
49TS-30-G2-( ) 1,866. 2,053.
49TS-30-G3-( ) 2,052. 2,239.
49TS-30-SN-( ) 4,295. 4,482.
49TS-36-( )-( )-( ) 1,866. 2,145.
49TS-36-G2-( ) 2,242. 2,521.
49TS-36-G3-( ) 2,483. 2,762.
49TS-36-SN-( ) 5,100. 5,379.
49TS-42-( )-( )-( ) 2,052. 2,429.
49TS-42-G2-( ) 2,615. 2,991.
49TS-42-G3-( ) 2,896. 3,272.
49TS-42-SN-( ) 6,287. 6,663.
49TR-36-( )-( )-( ) 1,679. 1,866.
49TR-36-G2-( ) 2,429. 2,616.
49TR-36-G3-( ) 2,615. 2,802.
49TR-36-SN-( ) 5,242. 5,429.
49TR-42-( )-( )-( ) 1,866. 2,145.
49TR-42-G2-( ) 2,710. 2,989.
49TR-42-G3-( ) 2,953. 3,232.
49TR-42-SN-( ) 6,568. 6,847.
49TR-48-( )-( )-( ) 2,052. 2,429.
49TR-48-G2-( ) 3,084. 3,460.
49TR-48-G3-( ) 3,458. 3,834.
49TR-48-SN-( ) 7,519. 7,895.
Construction
Top:
Three top options: 1� thick laminate top
with molded urethane beveled edge; 1 /2�
thick clear tempered glass with polished
pencil edge; and 3 /4� thick natural cleft
slate with beveled edge.
Base:
7/16� diameter cold rolled steel rod with
fused polyester, outdoor powder coat and
chrome-plated finishes.
Glides:
Plastic.
Outdoor use:
With proper preventative maintenance
and limited exposure to the elements, the
PaperClip cafe table is appropriate for
outdoor environments. Specify outdoor
powder coat black base finish and glass
or slate tops.
253
Shipping:
All tables shipped knocked-down. Base
and top assembly required.
Laminate/slate edge detail:
Glass edge detail:
KnollStudio

Emanuela Frattini
Propeller� Training Table Series
Configurations and Product Information
Below are only a few examples of suggested configurations using Propeller
Training tables, bridge tops, segments and screens.
All connections are tool-free and can be made by the user. To gang tables,
connectors can be simply removed from the integral storage port in the leg.
When tables are hard wired a screwdriver is needed.
Ordering Information
Specify:
1. Pattern number
2. Top finish selection
3. Caster or glide selection
(table only)
4. Edgeband selection
5. Grommet option
(table and bridge only)
6. Leg/grommet finish
Shipping:
Tops and legs are shipped
separately. Legs ship
knocked-down: foot plate and
vertical component. Simple field
assembly required.
Scope
Product scope:
P2-B Bullet table
P2-F Folding table
P2-M Semi-round table
P2-R Rectangular table
P2-S Segment
P2-T Trapezoid table
P2-V Rectangular bridge
P6-C Flip Top table
P8-C Adjustable Height table
Electrical options:
Please see Propeller Electrical
section for product and specification
details.
254
The inherent flexibility of Propeller tables allows for diverse applications,
ranging from setups for conference rooms to private offices and workstations.
Construction
Top:
1 3 /16� thick; 3-ply, solid-core
construction (5-ply, hollow-core
construction for trapezoid table with
lightweight honeycomb interior
within particleboard frame.) Plastic
laminate top and backer sheet on
bottom. Threaded inserts are
die-cast zinc.
Edges:
All table edges are finished,
allowing ganged tables to be
separated and used individually.
3mm flat PVC edgeband and solid
wood edge are available.
Molded edge detail:
Molded, seamless urethane edge
with integral color.
3mm flat edgeband:
PVC flat edgeband, with integral
color.
1 /4� edge detail:
Solid wood or PVC

P2-C, P2-V P2-C P2-R, P2-S, P2-SC
P2-R, P2-SC P2-B P2-R, P2-V, P2-SC
Grommet option:
Individual table segments may be
specified with zero, one, or two
grommets, located at mid-depth or
front edge locations. All grommets
are 3 1 /4� diameter. Optional
grommet-mounted power or
communications receptacles
available.
Grommet liners are black injection
molded ABS plastic. Yin-yang
grommet cap is textured, die-cast
aluminum with powder-coat finish.
P2-R, P2-SC , P2-VP2-R, P2-L, P2-SC P2-R, P2-V, P2-S
Legs:
Propeller’s S-shaped training leg
incorporates two separate channels
for power and communications
wiring. Cables are laid behind
flexible translucent PVC flipper
strips. Vertical leg is extruded
aluminum construction with clear
satin anodized or powder coat
finish. There are three types of
Propeller training legs:
Standard Training leg section:
255
Standard Training leg: vertical
extrusion is 3 3 /4�wx1 5 /8�d. Leg end
caps are injection-molded,
glass-filled nylon. Leg mounting
plates are aluminum die-castings
with integral storage port in a
textured paint finish.
C-leg and T-legs:
C-leg and T-leg offer additional
kneespace. Vertical extrusion is 5�w
x2 1 /4�d, same profile as conference
leg. Cast aluminum end plates with
textured paint finish. Cast
aluminum foot in textured metallic
powder coat.
KnollStudio
Glides/casters:
Glides and locking casters-black
nylon.
C-Leg has low glide at front and
high glide in the back.
T-Leg has two low glides.
Connector plates:
Aluminum die-casting with textured
paint finish. Integral storage port for
connecting tables.
Connector bars:
Bar and latch are made of cast alloy
with tumble-bead finish. Button is
injection-molded red ABS plastic.
Spring and back plate are steel
stampings.

Designer(s):
Emanuela Frattini, 1994
Award(s):
IIDA Apex Design Award, 1994;
IDSA Silver Industrial Design
Excellence Award, 1995;
Honorable Mention,ID Award
Design Review, 1995
Order Code
Example: P2-T60-C-LJ-JW-EGL-A
P2-T60 30� x60�trapezoid C Locking casters
LJ Brushed Aluminum
JW Frosty White 3mm
edgeband
EGL Single grommet, center,
back
A Anodized Aluminum legs
and grommet
Specify:
1. Pattern number
2. Locking caster or glide selection
(table only)
3. Top finish selection
4. Edgeband selection
5. Grommet or Transact options (table
and bridge only)
6. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Trapezoid Tables
description pattern no. type w d h
clearance
btwn
legs, w
P2-T Trapezoid table P2-T60 60�/30� 26� 28 1 /2� 48 1 /2�/
29 1 P2-T72 72�/36� 31� 28
/2�
1 /2� 60 1 /2�/
35 1 /2�
P2-U Trapezoid bridge top P2-U60 60�/30� 26� 2 5 /8� 48 1 /2�/
P2-S3 Trapezoid segment, 30° P2-S30 for 30�
angled
edge of
trap tbl
P2-S36 for 36�
angled
edge of
trap tbl
P2-S120 Pie segment, 120° P2-S120 for 30�
angled
edge of
trap tbl
P2-S126 for 36�
angled
edge of
trap tbl
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
29 1 P2-U72 72�/36� 31� 2
/2�
5 /8� 60 1 /2�/
35 1 /2�
256
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking casters (suffix C)
2 5 /8�
2 5 /8�
47 1 /8� 29� 2 5 /8�
56 5 /8� 35� 2 5 /8�
clearance
btwn
legs, d
15 1 /4� 44
21 1 /4� 55
table
weight
(lbs.)
28
39
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet Options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� diameter. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (Y)
Two grommets, left and right, mid-depth
(AG)
Single grommet, left, mid-depth (BG)
Two grommets, left and right, back
(DG)
Single grommet, center, back (EGW)
Single grommet, center, front (EGN)

pattern no. list price
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-T60 $1,318. $1,620. $3,333. $3,835.
P2-T72 1,545. 1,901. 3,470. 4,002.
P2-U60 1,032. 1,267. 2,947. 3,431.
P2-U72 1,261. 1,550. 3,086. 3,599.
P2-S30 452. 558. 941. 1,507.
P2-S36 509. 627. 1,030. 1,658.
P2-S120 859. 1,055. 1,930. 3,143.
P2-S126 1,032. 1,267. 2,283. 3,734.
Features
Connecting tables:
Each trapezoid table, segment, or bridge
top includes two hand-held connector
bars to connect tops to each other, or to
rectangular tables of the same depth.
Trapezoids connect on short sides only.
When not needed, connectors store in
ports at top of table leg. 120° segments
have additional fixed connector installed
on outer side.
Bridge tops and segments:
Pie-shaped segments and bridge tops
attach to tables with connector bars.
These tops can only be used between two
tables, not cantilevered at the end of a
single table. If desired, legs can be
retrofitted on bridge tops. Purchase leg
kit separately (see page 340).
Bridge tops have a weight capacity of
300 pounds.
Modesty screens for Trapezoid tables:
Due to the positioning of the legs on the
Trapezoid tables, modesty panels must
be attached using 90 degree connectors
drilled into the top. Please order part
number KR1C5899CT. Specify 2 per
table
Trapezoid stacking feature:
Trapezoid tables can be stacked to a
maximum height of 3 tables high by
lifting each table only 3�. Red rubber
bumpers protect worksurfaces from
marring.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
257
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-R24-G-PA-6-Y-WK
P2-R24 30� x60�rectangle G Glides
PA Pearwood laminate
6 Black molded edgeband
Y No grommet
W-K Maple legs
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Grommet, Plexus or Transact option
6. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Rectangular, Square and Bullet Tables
description pattern no. type w d h
clearance
between
legs w
clearance
between
legs d
P2-R Rectangular table P2-R02 48� 18� 28 1 /2� 40� 7 3 /4� 44
P2-R04 60� 18� 28 1 /2� 52� 7 3 /4� 55
P2-R06 72� 18� 28 1 /2� 64� 7 3 /4� 62
P2-R10 36� 24� 28 1 /2� 28� 13 3 /4� 50
P2-R12 48� 24� 28 1 /2� 40� 13 3 /4� 54
P2-R14 60� 24� 28 1 /2� 52� 13 3 /4� 63
P2-R16 72� 24� 28 1 /2� 64� 13 3 /4� 73
P2-R21 42� 30� 28 1 /2� 34� 19 3 /4� 57
P2-R22 48� 30� 28 1 /2� 40� 19 3 /4� 63
P2-R24 60� 30� 28 1 /2� 52� 19 3 /4� 75
P2-R25 66� 30� 28 1 /2� 58� 19 3 /4� 81
P2-R26 72� 30� 28 1 /2� 64� 19 3 /4� 87
P2-R32 48� 36� 28 1 /2� 52� 25 3 /4� 73
P2-R34 60� 36� 28 1 /2� 52� 25 3 /4� 87
P2-R36 72� 36� 28 1 /2� 64� 25 3 /4� 101
P2-B Bullet training table P2-B26 72� 30� 28 1 /2� 52� 19 3 /4� 86
P2-B36 72� 36� 28 1 /2� 52� 25 3 /4� 100
P2-N Square table P2-N30 36� 36� 28 1 /2� 59
P2-N41 42� 42� 28 1 /2� 75
P2-N52 48� 48� 28 1 /2� 94
Training wood legs Set of 4 W-( ) beech
W-(K) maple
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
258
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood leg finishes:
For wood leg finish, add letter W to the
end of the pattern number and then
specify finish (e.g. W-K for maple legs).
On all tables with wood legs, grommet
cover will be in anodized finish only.
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking casters (suffix C)
table
weight
(lbs.)

pattern no.
wood legs
upcharge
laminate/
3mm edge
laminate /
molded edge
veneer/
3mm edge veneer/wood edge
P2-R02 * $877. $1,079. $2,563. $3,057.
P2-R04 * 974. 1,198. 2,622. 3,113.
P2-R06 * 1,056. 1,297. 2,662. 3,161.
P2-R10 * 926. 1,281. 2,561. 3,057.
P2-R12 * 1,088. 1,338. 2,614. 3,119.
P2-R14 1,201. 1,478. 2,665. 3,175.
P2-R16 1,318. 1,620. 2,723. 3,237.
P2-R21 * 1,146. 1,408. 2,640. 3,141.
P2-R22 * 1,201. 1,478. 2,662. 3,175.
P2-R24 1,318. 1,620. 2,741. 3,266.
P2-R25 1,374. 1,689. 2,770. 3,293.
P2-R26 1,431. 1,760. 2,793. 3,322.
P2-R32 * 1,318. 1,620. 2,718. 3,237.
P2-R34 1,431. 1,760. 2,791. 3,322.
P2-R36 1,545. 1,901. 2,869. 3,411.
P2-B26 1,488. 1,830. 3,345. 5,282.
P2-B36 1,605. 1,973. 3,556. 5,657.
P2-N30 * 1,201. 1,478. 2,173. 2,911.
P2-N41 * 1,318. 1,620. 2,359. 3,113.
P2-N52 1,431. 1,760. 2,377. 3,161.
W-( ) 864.
W-(K) 956.
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left & right, front (DGR),
(DGL), (DG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, center, front
(EGR), (EGL), (EG)
Single grommet, center, right (HG)
Single grommet, center (P2-N) (GG)
* AG, BG not available on 18� deep
tables
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1
/2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep Rectangular tables only. 36�,42�
and 48� wide tables, ES location only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)
259
Plexus options: ($27 per cutout)
* Plexus box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM),
(DMR), (DML)
For medium Plexus, left & right, front
(DM), (EMR), (EML)
For medium Plexus, center (P2-N) (GM)
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Features
Connecting tables:
Each rectangular table, bullet table or
folding table, includes two connector
bars to connect rectangular tops to each
other on any side. Bullet tables connect
on flat depth side only. 30�d and 36� d
tables also connect to trapezoids of same
depth. When not needed, connectors
store in ports at top of table leg.
Wood Training Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard training legs. Finishes
are equivalent to Propeller veneer tops.
Tables with wood legs can be ganged to
tables with aluminum legs.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
Square Tables:
Square tables have four legs with
rectangular table end plates. Two
connector bars per table. Square tables
gang on all four sides to training tables of
same width.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-E36-G-SL-1-Y-A
P2-E36 72� x36�bullet desk
G Glides
SL Slate laminate
1 Spring Green edgeband
Y No grommets
A Anodized Aluminum leg
and grommet
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Grommet, Plexus or Transact option
6. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Rectangular and Bullet Desks, Returns and End Tables
description pattern no. type w d h
P2-E Bullet desk for return attachment (end
table) 4 legs
P2-D Rectangular desk for return
attachment - 4 legs
clearance
between
legs w
clearance
between
legs d
table
weight
(lbs.)
P2-E26 72� 30� 28 1 /2� 52� 19 3 /4� 86
P2-E36 72� 36� 28 1 /2� 52� 25 3 /4� 100
P2-D14 60� 24� 28 1 /2� 52� 13 3 /4� 63
P2-D16 72� 24� 28 1 /2� 64� 13 3 /4� 73
P2-D24 60� 30� 28 1 /2� 52� 19 3 /4� 75
P2-D25 66� 30� 28 1 /2� 58� 19 3 /4� 81
P2-D26 72� 30� 28 1 /2� 64� 19 3 /4� 87
P2-D34 60� 36� 28 1 /2� 52� 25 3 /4� 87
P2-D36 72� 36� 28 1 /2� 64� 25 3 /4� 101
P2-L Rectangular table return - 2 legs P2-L02 48� 18� 28 1 /2� 44� 7 3 /4� 37
P2-L04 60� 18� 28 1 /2� 56� 7 3 /4� 49
P2-L10 36� 24� 28 1 /2� 32� 13 3 /4� 44
P2-L12 48� 24� 28 1 /2� 44� 13 3 /4� 46
P2-L14 60� 24� 28 1 /2� 56� 13 3 /4� 55
P2-L16 72� 24� 28 1 /2� 68� 13 3 /4� 65
P2-L21 42� 30� 28 1 /2� 38� 19 3 /4� 49
P2-L22 48� 30� 28 1 /2� 44� 19 3 /4� 55
P2-L24 60� 30� 28 1 /2� 56� 19 3 /4� 67
P2-L25 66� 30� 28 1 /2� 62� 19 3 /4� 73
P2-L26 72� 30� 28 1 /2� 68� 19 3 /4� 79
P2-L32 48� 36� 28 1 /2� 44� 25 3 /4� 65
P2-L34 60� 36� 28 1 /2� 56� 25 3 /4� 79
P2-L36 72� 36� 28 1 /2� 68� 25 3 /4� 93
Training wood legs Set of 4 W-( ) beech
W-(K) maple
Training wood legs Set of 2 W-( ) beech
W-(K) maple
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
260
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood leg finishes:
For wood leg finish, add letter W to the
end of the pattern number and then
specify finish (e.g. W-K for maple legs).
On all tables with wood legs, grommet
cover will be in anodized finish only.
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking casters (suffix C)
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-E26 $1,530. $1,880. $3,345. $5,282.
P2-E36 1,645. 2,020. 3,556. 5,657.
P2-D14 1,244. 1,528. 2,665. 3,175.
P2-D16 1,356. 1,670. 2,723. 3,237.
P2-D24 1,356. 1,670. 2,741. 3,266.
P2-D25 1,414. 1,739. 2,770. 3,293.
P2-D26 1,473. 1,810. 2,793. 3,322.
P2-D34 1,473. 1,810. 2,791. 3,322.
P2-D36 1,585. 1,866. 2,869. 3,265.
P2-L02 * 666. 818. 2,388. 2,876.
P2-L04 * 762. 938. 2,447. 2,930.
P2-L10 * 732. 1,002. 2,386. 2,876.
P2-L12 * 945. 1,161. 2,440. 2,937.
P2-L14 1,061. 1,303. 2,490. 2,994.
P2-L16 * 1,172. 1,443. 2,549. 3,056.
P2-L21 * 1,001. 1,233. 2,465. 2,958.
P2-L22 1,061. 1,303. 2,488. 2,994.
P2-L24 1,172. 1,443. 2,567. 3,084.
P2-L25 1,230. 1,513. 2,597. 3,112.
P2-L26 1,290. 1,585. 2,619. 3,139.
P2-L32 * 1,172. 1,380. 2,544. 2,925.
P2-L34 1,290. 1,585. 2,616. 3,139.
P2-L36 1,403. 1,724. 2,695. 3,229.
W-( ) 864.
W-(K) 956.
W-( ) 449.
W-(K) 534.
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left & right, front
(DGR), (DGL), (DG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, center, front
(EGR), (EGL), (EG)
Single grommet, center, right (HG)
* AG, BG not available on 18� deep
tables
Plexus options: ($27 per cutout)
*Plexus box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM),
(DMR), (DML)
For medium Plexus, left & right, front
(DM), (EMR), (EML)
261
Features
Connecting tables:
Each rectangular desk, bullet desk and
end table includes two connector bars
which may be used to connect
rectangular tops to each other on any
side. 30�d and 36�d tables also connect
to trapezoids of same depth. When not
needed, connectors store in ports at top
of table leg.
Desk for return attachment:
To create an L-desk configuration,
specify a desk for return attachment plus
a24�or 30� deep end table. Desks come
with threaded inserts and a connector kit
to be field-installed. End table returns
attach perpendicularly with included two
connector bars.
Rectangular end tables:
By attaching to the short side of other
rectangular tables or to the front of
rectangular desks, end tables allow
additional worksurfaces while
minimizing the number of legs. If
desired, legs can be retrofitted so table
can be used freestanding. Purchase leg
kit separately (see page 340).
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1996
Order Code
Example: P2-M20-C-SL-4-A
P2-M20 60� wide semi-circular table
C Locking casters
SL Slate laminate
4 Light Grey edgeband
A Anodized Aluminum legs
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Grommet, Plexus, or Transact option
6. Grommet/leg finish
Finishes:
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Emanuela Frattini
Propeller� Training Table Series
Semi-Circular Tables, Bridge Tops and Segments
description pattern no. type w d h
clearance
between
legs
P2-M Semi-circular table - three legs P2-M10 48� 24� 28 1 /2� 35 1 /2� 51
P2-M20 60� 30� 28 1 /2� 51 1 /2� 62
P2-M30 72� 36� 28 1 /2� 63 1 /2� 81
Training wood legs Set of 3 W-( ) beech
W-(K) maple
P2-V Rectangular bridge top - no legs P2-V02 48� 18� 2 5 /8� 30
P2-V04 60� 18� 2 5 /8� 41
P2-V10 36� 24� 2 5 /8� 30
P2-V12 48� 24� 2 5 /8� 38
P2-V14 60� 24� 2 5 /8� 47
P2-V21 42� 30� 2 5 /8� 41
P2-V22 48� 30� 2 5 /8� 47
P2-V24 60� 30� 2 5 /8� 59
P2-V32 48� 36� 2 5 /8� 57
P2-V34 60� 36� 2 5 /8� 71
P2-S Bridging segments 60°, 90° - no legs P2-S62 60° 24� 2 5 /8�
P2-S92 90° 24� 2 5 /8�
P2-S64 60° 30� 2 5 /8�
P2-S94 90° 30� 2 5 /8�
P2-S66 60° 36� 2 5 /8�
P2-S96 90° 36� 2 5 /8�
Finishes
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood leg finishes:
For wood leg finish, add letter W to the
end of the pattern number and then
specify finish (e.g. W-K for maple legs).
On all tables with wood legs, grommet
cover will be in anodized finish only.
262
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
table
weight
(lbs.)
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet Option:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options (rectangular bridge top
only): ($27 per cutout)
No grommet (Y)
Two grommets, left and right, mid-depth
(AG)
Single grommet, left, mid-depth (BG)
Two grommets, left and right, front (DG)
Single grommet, center, front (EG)
* AG, BG not available on 18� deep
tables

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-M10 $1,032. $1,267. $2,257. $3,538.
P2-M20 1,146. 1,408. 2,523. 3,984.
P2-M30 1,261. 1,550. 2,796. 4,435.
W-( ) 683.
W-(K) 811.
P2-V02 * 432. 533. 2,196. 2,673.
P2-V04 * 530. 650. 2,255. 2,731.
P2-V10 * 604. 742. 2,192. 2,673.
P2-V12 * 800. 985. 2,245. 2,736.
P2-V14 916. 1,125. 2,299. 2,791.
P2-V21 * 800. 985. 2,273. 2,757.
P2-V22 * 916. 1,125. 2,296. 2,791.
P2-V24 1,032. 1,267. 2,374. 2,881.
P2-V32 * 1,032. 1,267. 2,350. 2,854.
P2-V34 1,146. 1,408. 2,423. 2,937.
P2-S62 509. 627. 1,025. 1,658.
P2-S92 567. 697. 1,115. 1,805.
P2-S64 567. 697. 1,116. 1,805.
P2-S94 625. 767. 1,205. 1,956.
P2-S66 625. 767. 1,206. 1,955.
P2-S96 682. 837. 1,298. 2,105.
Plexus Options: ($27 per coutout)
* Plexus box not available
For no Plexus box (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM)
For medium Plexus, left & right, front
(DM)
Note:
Cutouts not available on
Semi-Circular Tables.
Semi-Circular Tables:
Semi-circular tables have three legs for
maximum leg space. Use 180° tables
free-standing or connected to other
tables. 180° tables connect to
rectangular tables of same width or to
rectangular tables in a back-to-back
configuration. Connect two
semi-circular tables to create a large
round table.
Bridge tops have a weight capacity of
300 pounds.
Configurations:
with rectangular table/bridge top
with rectangular tables back-to-back two
180° tables
263
Features
Wood Training Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard training legs. Finishes
are equivalent to Propeller veneer tops.
Stacking:
Semi-circular tables and square tables
do not stack. Bridge tops can be stacked
ten high on table dolly (see page 272).
Shipping:
Propeller tables shipped knocked-down.
Simple field assembly required.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-C26-PA-R5-EG-J
P2-A26 72� x30�bullet training
table with C-Legs
PA Pearwood laminate
R5 Black 3mm edgeband
EG Single grommet, center,
front
612 Medium Metallic Grey legs
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Grommet, Plexus or Transact option
5. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Rectangular and Bullet tables with C-Legs and T-Legs
description pattern no. w d h leg type
clearance
between
legs
P2-C Rectangular table with C-Legs/T-Legs P2-C02 48� 18� 28� C-Legs 34 1 /2� 50
P2-C04 60� 18� 28 1 /2� C-Legs 46 1 /2� 53
P2-C06 72� 18� 28 1 /2� C-Legs 58 1 /2� 55
P2-C10 36� 24� 28 1 /2� C-Legs 22 1 /2� 60
P2-C12 48� 24� 28 1 /2� C-Legs 34� 67
P2-C14 60� 24� 28 1 /2� C-Legs 46 1 /2� 76
P2-C16 72� 24� 28 1 /2� C-Legs 58 1 /2� 86
P2-C21 42� 30� 28 1 /2� C-Legs 29 1 /2� 70
P2-C22 48� 30� 28 1 /2� C-Legs 34 1 /2� 76
P2-C23 48� 30� 28 1 /2� T-Legs 34 1 /2� 76
P2-C24 60� 30� 28 1 /2� C-Legs 46 1 /2� 82
P2-C27 60� 30� 28 1 /2� T-Legs 46 1 /2� 82
P2-C25 66� 30� 28 1 /2� C-Legs 52 1 /2� 88
P2-C28 66� 30� 28 1 /2� T-Legs 52 1 /2� 88
P2-C26 72� 30� 28 1 /2� C-Legs 58 1 /2� 100
P2-C29 72� 30� 28 1 /2� T-Legs 58 1 /2� 100
P2-C32 48� 36� 28 1 /2� T-Legs 34 3 /4� 95
P2-C34 60� 36� 28 1 /2� T-Legs 43 3 /4� 109
P2-C36 72� 36� 28 1 /2� T-Legs 52 3 /4� 123
P2-A Bullet training table with C-Legs /
T-Legs
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
table
weight
(lbs.)
P2-A26 72� 30� 28 1 /2� C-Legs 50 1 /8� 86
P2-A29 72� 30� 28 1 /2� T-Legs 50 1 /8� 86
P2-A36 72� 36� 28 1 /2� T-Legs 49 3 /4� 100
264
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides:
Glides (suffix G)

pattern no.
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-C02 * $1,275. $1,605. $2,956. $3,477.
P2-C04 * 1,286. 1,649. 3,023. 3,530.
P2-C06 * 1,320. 1,693. 3,060. 3,579.
P2-C10 * 1,482. 1,826. 2,960. 3,477.
P2-C12 * 1,488. 1,830. 3,169. 3,701.
P2-C14 1,605. 1,973. 3,223. 3,756.
P2-C16 1,719. 2,114. 3,280. 3,819.
P2-C21 * 1,545. 1,901. 3,196. 3,721.
P2-C22 * 1,605. 1,973. 3,218. 3,756.
P2-C23 * 1,727. 2,101. 3,349. 3,894.
P2-C24 1,719. 2,114. 3,298. 3,846.
P2-C27 1,843. 2,242. 3,430. 3,985.
P2-C25 1,777. 2,184. 3,326. 3,875.
P2-C28 1,900. 2,313. 3,459. 4,013.
P2-C26 1,832. 2,254. 3,349. 3,902.
P2-C29 1,957. 2,280. 3,482. 3,867.
P2-C32 * 1,863. 2,114. 3,400. 3,957.
P2-C34 1,924. 2,254. 3,479. 4,040.
P2-C36 1,987. 2,394. 3,557. 4,131.
P2-A26 1,890. 2,323. 3,901. 5,863.
P2-A29 2,014. 2,453. 4,034. 6,001.
P2-A36 2,005. 2,464. 4,245. 6,377.
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left & right, front
(DGR), (DGL), (DG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, center, front
(EGR), (EGL), (EG)
Single grommet, center, right (HG)
* AG, BG not available on 18� deep
tables
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1
/2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep Rectangular C-leg tables only. 36�,
42� and 48� wide tables, ES location
only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)
265
Plexus options: ($27 per cutout)
*Plexus Box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM),
(DMR), (DML)
For medium Plexus, left & right,
front (DM), (EMR), (EML)
Features
Bullet tables:
Bullet tables with C-Legs are
non-handed. Bullet-shaped end of the
table may be positioned on left or right
side during installation.
C-Leg tables/T-Leg tables:
C-Leg and T-Leg tables combine
Propeller table features with more leg
space. Tables have either two C-Legs or
T-Legs. 24�d and 30�d training tables
have C-Legs mounted to the rear, 36�d
training tables have centered T-Legs.
Legs are positioned at 3 7 /8� from table
edge on the depth side. Tables have
identical wire management and ganging
capabilities as standard training tables,
but do not connect to trapezoid tables.
Note:
C-Leg and T-Leg tables are available
with glides only.
Maintenance:
See pages 27-28.
KnollStudio
Note:
Propeller tables are Greenguard
certified.
Connecting tables:
Each rectangular table or bullet table
includes four connector plates and two
connector bars to connect rectangular
tables to each other on any side. Bullet
tables connect on flat depth side only.
C-Leg and T-Leg tables do not connect to
trapezoid tables. When not needed,
connectors may be stored in additional
black plastic storage port attached
underneath table tops.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-G36-SL-4-Y-J
P2-G36 72� x36�bullet desk, t-legs
SL Slate laminate
4 Light Grey edge
Y No grommet
612 Medium Metallic Grey legs
Example: P2-J12-SL-5-Y-J
P2-J12 24� x48� return, C-Legs
SL Slate laminate
R5 3mm black edgeband
Y No grommets
612 Medium Metallic Grey legs
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Grommet option
5. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Returns with C-Legs and T-Legs
description pattern no. w d h leg type
P2-I Rectangular desk for return attachment
with C-Legs/T-Legs - 2 legs
P2-J Rectangular return/end table with
C-Legs/T-Legs-1leg
P2-G Bullet desk for return attachment with
C-Legs/T-Legs - 2 legs
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Glides:
Glides (suffix G)
clearance
between
legs
table
weight
(lbs.)
P2-I02 48� 18� 28 1 /2� C-Legs 34 1 /2� 36
P2-I04 60� 18� 28 1 /2� C-Legs 46 1 /2� 38
P2-I06 72� 18� 28 1 /2� C-Legs 58 1 /2� 40
P2-I10 36� 24� 28 1 /2� C-Legs 22 1 /2� 45
P2-I14 60� 24� 28 1 /2� C-Legs 46 1 /2� 76
P2-I16 72� 24� 28 1 /2� C-Legs 58 1 /2� 86
P2-I23 48� 30� 28 1 /2� T-Legs 41 1 /4�� 62
P2-I24 60� 30� 28 1 /2� C-Legs 46 1 /2� 82
P2-I27 60� 30� 28 1 /2� T-Legs 46 1 /2� 82
P2-I25 66� 30� 28 1 /2� C-Legs 52 1 /2� 88
P2-I28 66� 30� 28 1 /2� T-Legs 52 1 /2� 88
P2-I26 72� 30� 28 1 /2� C-Legs 58 1 /2� 100
P2-I29 72� 30� 28 1 /2� T-Legs 58 1 /2� 100
P2-I34 60� 36� 28 1 /2� T-Legs 63 3 /4� 109
P2-I36 72� 36� 28 1 /2� T-Legs 52 3 /4� 123
P2-J02 48� 18� 28 1 /2� C-Legs 41 1 /4� 95
P2-J04 60� 18� 28 1 /2� C-Legs 53 1 /4� 107
P2-J12 48� 24� 28 1 /2� C-Legs 41 1 /4� 53
P2-J14 60� 24� 28 1 /2� C-Legs 53 1 /4� 62
P2-J21 42� 30� 28 1 /2� C-Legs 35 1 /4� 56
P2-J22 48� 30� 28 1 /2� C-Legs 41 1 /4� 62
P2-J23 48� 30� 28 1 /2� T-Legs 41 1 /4� 62
P2-J24 60� 30� 28 1 /2� C-Legs 53 1 /4� 68
P2-J27 60� 30� 28 1 /2� T-Legs 53 1 /4� 68
P2-J32 48� 36� 28 1 /2� T-Legs 41 3 /8� 76
P2-J34 60� 36� 28 1 /2� T-Legs 51 7 /8� 90
P2-G26 72� 30� 28 1 /2� C-Legs 58 1 /2� 99
P2-G29 72� 30� 28 1 /2� T-Legs 58 1 /2� 99
P2-G36 72� 36� 28 1 /2� T-Legs 52 3 /4� 122
266
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood leg finishes:
For wood leg finish, add letter W to the
end of the pattern number and then
specify finish (e.g. W-K for maple legs).
On all tables with wood legs, grommet
cover will be in anodized finish only.
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Maintenance:
See pages 27-28.

pattern no.
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-I02 * $883. $1,204. $2,956. $3,477.
P2-I04 * 898. 1,245. 3,023. 3,530.
P2-I06 * 928. 1,284. 3,060. 3,579.
P2-I10 * 1,201. 1,481. 2,960. 3,477.
P2-I14 1,645. 2,020. 3,223. 3,756.
P2-I16 1,759. 2,161. 3,280. 3,819.
P2-I23 * 1,797. 2,201. 3,339. 3,891.
P2-I24 1,759. 2,161. 3,298. 3,846.
P2-I27 1,821. 2,227. 3,364. 3,917.
P2-I25 1,815. 2,232. 3,326. 3,875.
P2-I28 1,877. 2,297. 3,393. 3,944.
P2-I26 1,873. 2,301. 3,349. 3,902.
P2-I29 1,994. 2,438. 3,968. 5,934.
P2-I34 1,873. 2,301. 3,479. 4,040.
P2-I36 1,987. 2,443. 3,557. 4,131.
P2-J02 * 859. 1,055. 2,956. 3,477.
P2-J04 * 952. 1,171. 3,023. 3,530.
P2-J12 * 1,146. 1,408. 3,169. 3,701.
P2-J14 1,261. 1,550. 3,223. 3,756.
P2-J21 * 1,201. 1,478. 3,196. 3,721.
P2-J22 * 1,261. 1,550. 3,218. 3,756.
P2-J23 * 1,325. 1,615. 3,285. 3,826.
P2-J24 1,374. 1,689. 3,298. 3,846.
P2-J27 1,438. 1,756. 3,364. 3,917.
P2-J32 * 1,374. 1,689. 3,407. 3,957.
P2-J34 1,488. 1,830. 3,479. 4,040.
P2-G26 1,930. 2,372. 3,901. 5,863.
P2-G29 1,951. 2,285. 3,968. 5,676.
P2-G36 2,042. 2,513. 4,245. 6,377.
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left & right, front
(DGR), (DGL), (DG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, center, front
(EGR), (EGL), (EG)
Single grommet, center, right (HG)
* AG, BG not available on 18� deep
tables
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1
/2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep Rectangular tables only. 36�,42�
and 48� wide tables, ES location only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)
267
Plexus options: ($27 per cutout)
* Plexus Box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM),
(DMR), (DML)
For medium Plexus, left & right, front
(DM), (EMR), (EML)
Features
C-Leg tables/T-Leg desks and returns:
C-Leg and T-Leg desks and returns
combine Propeller table features with
more leg space. 24�d and 30�d tables
have C-Legs mounted to the rear, 36�d
tables have centered T-Legs. Legs are
positioned at 3 7 /8� from table edge on the
depth side.
Bullet desks:
Bullet desks with C-Legs are
non-handed.
Connecting tables:
C-Leg and T-Leg tables do not connect to
trapezoid tables. Connector plates have
to be field-installed.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
Desk for return attachment:
To create an L-shaped desk
configuration, specify a desk for return
attachment plus a 24� or 30� deep end
table/return. The fifth connector on
rectangular desks and bullet desks can
be positioned non-handedly to connect a
return perpendicularly off the desk.
Connector has to be field-installed.
Returns simply attach with standard
connector bars.

Designer(s):
Emanuela Frattini, 2002
Order Code
Example: P6-C26-PA-R6-EG-A
P6-C26 72� x30�flip-top with
C-legs
PA Pearwood laminate
R6 Medium Grey 3mm
edgeband
EG Single grommet, center
back
A Anodized Aluminum
grommet and legs
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Grommet, Plexus or Transact option
5. Leg/grommet finish
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Emanuela Frattini
Propeller� Training Table Series
Flip-Top Tables with C-Legs and T-Legs
description pattern no. w d h leg type
P6-C Rectangular flip-top table with
C-Legs/T-Legs
P6-C02 48� 18� 28 1 /2� C-Legs 71
P6-C04 60� 18� 28 1 /2� C-Legs 82
P6-C06 72 18� 28 1 /2� C-Legs 91
P6-C12 48� 24� 28 1 /2� C-Legs 73
P6-C14 60� 24� 28 1 /2� C-Legs 84
P6-C16 72� 24� 28 1 /2� C-Legs 96
P6-C22 48� 30� 28 1 /2� C-Legs 83
P6-C24 60� 30� 28 1 /2� C-Legs 97
P6-C26 72� 30� 28 1 /2� C-Legs 111
P6-C32 48� 36� 28 1 /2� T-Legs 95
P6-C34 60� 36� 28 1 /2� T-Legs 112
P6-C36 72� 36� 28 1 /2� T-Legs 126
P6-Y Round flip-top table P6-Y36 36� 28 1 /2� 4 star 53
P6-Y42 42� 28 1 /2� 4 star 67
P6-X Square flip-top table P6-X30 30� 28 1 /2� 4 star 49
P6-X36 36� 28 1 /2� 4 star 63
P6-X42 42� 28 1 /2� 4 star 80
Finishes
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Note:
Propeller tables are Greenguard
certified.
Maintenance:
See pages27-28.
268
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options:($27 per cutout)
No grommet (Y)
Single grommet, left, mid-depth (BG)
Two grommets, left and right, front
(DG)
Two grommets, left and right, mid-depth
(AG)
Single grommet, center, front (EG)
Singel grommet, center (GG)
* AG, BG not available on 18� deep
tables
table weight
(lbs.)
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1 /2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep Rectangular flip-top tables with
C-leg. 48� wide tables, ES location only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)
Plexus options: ($27 per cutout)
* Plexus Box not available
No Plexus (Y)
Single medium Plexus, center (GM)
Two medium Plexus, left and right,
mid-depth (AM)

pattern no.
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P6-C02 * $1,436. $1,763. $3,386. $3,924.
P6-C04 * 1,537. 1,890. 3,516. 4,047.
P6-C06 * 1,624. 1,995. 3,578. 4,118.
P6-C12 * 2,133. 2,504. 3,755. 4,310.
P6-C14 2,249. 2,611. 3,841. 4,405.
P6-C16 2,358. 2,706. 3,894. 4,461.
P6-C22 * 2,236. 2,575. 3,768. 4,332.
P6-C24 2,368. 2,688. 3,929. 4,507.
P6-C26 2,455. 2,796. 4,011. 4,592.
P6-C32 * 2,346. 2,696. 3,917. 4,490.
P6-C34 2,494. 2,813. 4,022. 4,609.
P6-C36 2,695. 2,922. 4,057. 4,652.
P6-Y36 1,974. 2,103. 3,079. 4,093.
P6-Y42 1,997. 2,460. 3,229. 4,532.
P6-X30 1,938. 2,053. 2,727. 3,497.
P6-X36 1,983. 2,110. 2,818. 3,515.
P6-X42 2,000. 2,160. 3,004. 3,624.
Features
Note:
- Rectangular Fliptop tables can be
specified with medium cordset Plexus or
Transact
- Plexus options not available for 48�
wide tables
- Plexus options for 60� and 72� wide
tables: (GM, AM)
- Cutouts not available on square or
round Flip-Top tables.
C-Leg/T-Leg Flip-Top Rectangular
Tables:
24�d and 30�d tables have C-Legs
mounted to the rear, 36�d flip-top tables
have centered T-Legs. Legs are
positioned at 2 7 /8� from table edge on the
depth side. Flip-Top tables can be
ganged side to side or front to back to
other flip-top or standard tables. C-Leg
and T-Leg tables do not connect to
trapezoid tables.
Note:
Flip-Top tables are available with
locking casters only.
Four Star Base:
Extruded aluminum column with
anodized or powder-coat finish. Black
aluminum die cast top attachment plate.
Cast aluminum star base with protective
textured metallic surface coat matching
the column color. Flip-Top column base
tables feature locking casters.
Flip Mechanism:
The Flip mechanism consists of black
nylon glass-filled housing on both the
C-Leg/T-Leg and the column base tables.
The cross-member on rectangular tables
is an aluminum extrusion that is
anodized or painted to match the
Propeller C-Leg/T-Leg. To operate,
simply depress the mechanism to lower
the table; to raise the table, lift the
mechanism towards the table top.
Flip-Top mechanism is pneumatic and
easy to operate with one hand.
Wire management:
Vertical extrusion of C-Legs and T-Legs
is 5�wx2 1 /4� – same profile as
conference leg profile. In horizontal
position, Quadruplex monument or
shallow plug in Plexus boxes can be
used.
269
Nesting:
Flip-Top tables nest easily for compact
storage. C-Leg and T-Leg Flip Tops allow
the top to flip and nest as well as
providing more leg space than a standard
folding table. When nested, the tables
are staggered. There is no limit to the
number of tables that can be nested
together.
Example:
Footprint area guideline C-Leg
48� x24�C-Leg - Two 48� x24�C-Leg tables flipped and
nested measure 51� x301 /2�
- Three 48� x24�C-Leg tables flipped
and nested measure 54� x381 /2�
- Six 48� x24�C-Leg tables flipped and
nested measure 63� x63�
60� x30�C-Leg - Two 60� x30�C-Leg tables flipped and
nested measure 63� x301 /2�
- Three 60� x30�C-Leg tables flipped
and nested measure 66� x381 /2�
- Six 60� x30�C-Leg tables flipped and
nested measure 75� x63�
KnollStudio
72� x36� T-Leg
Footprint area guideline T-Leg
- Two 72� x36� T-Leg tables flipped and
nested measure 75� x42�
- Three 72� x36� T-Leg tables flipped
and nested measure 78� x49 1 /2�
- Six 72� x36� T-Leg tables flipped and
nested measure 87� x72�
Shipping:
C-Leg/T-Leg Flip-Top tables are shipped
knocked down. The table top, flip
mechanism, aluminum cross-member,
and leg kit are
all shipped in separate boxes. Simple
field assembly required.
Nesting Diagrams Guideline:

Designer(s):
Emanuela Frattini
Order Code
Example: P8CE12-122-JW-A
P8C12 Propeller Electrical
Adjustable Table, 48 x 24
122 Brushed Sand laminate
JW Frosty White 3mm
Edgeband
A Andonized legs
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Grommet, Plexus or Transact option
5. Leg/grommet finish
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Emanuela Frattini
Propeller� Training Table Series
Adjustable Height Tables
description pattern no. w d
clearance
between legs w
P8-CE Height Adjustable Table, Electrical P8-CE12 48� 24� 31 1 /2� 103
P8-CE14 60� 24� 43 1 /2� 114
P8-CE16 72� 24� 55 1 /2� 125
P8-CE22 48� 30� 31 1 /2� 111
P8-CE24 60� 30� 43 1 /2� 124
P8-CE26 72� 30� 55 1 /2� 139
P8-CM Height Adjustable Table, Manual P8-CM12 48� 24� 31 1 /2� 98
P8-CM14 60� 24� 43 1 /2� 103
P8-CM16 72� 24� 55 1 /2� 114
P8-CM22 48� 30� 31 1 /2� 100
P8-CM24 60� 30� 43 1 /2� 113
P8-CM26 72� 30� 55 1 /2� 128
Finishes
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg/grommet finish:
Anodized Aluminum (suffix A)
Note:
Propeller tables are Greenguard
certified.
270
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Center grommet (GG)
Mid-depth grommet, left & right (AG)
Two grommets, left & right, front (DG)
Single grommet, center, front (EG)
Back grommet, left (BGL)
Back grommet, right (BGR)
table weight
(lbs)
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1
/2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep tables only. 48� wide tables, ES
location only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)

pattern no. laminate/3mm edge laminate/molded edge veneer/wood edge veneer/3mm edge
P8-CE12 $3,810. $3,933. $5,998. $5,616.
P8-CE14 3,857. 3,973. 6,054. 5,666.
P8-CE16 3,900. 4,013. 6,116. 5,727.
P8-CE22 3,850. 3,968. 6,054. 5,664.
P8-CE24 3,903. 4,018. 6,143. 5,745.
P8-CE26 3,955. 4,064. 6,198. 5,798.
P8-CM12 * 2,824. 2,947. 5,012. 4,628.
P8-CM14 * 2,869. 2,987. 5,067. 4,681.
P8-CM16 * 2,913. 3,025. 5,128. 4,739.
P8-CM22 * 2,862. 2,980. 5,067. 4,677.
P8-CM24 * 2,917. 3,032. 5,156. 4,758.
P8-CM26 * 2,968. 3,079. 5,211. 4,811.
Plexus options: ($27 per cutout)
* Plexus Box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left &
right, mid-depth (AM)
Note:
- Plexus box not available on manual
mechanism tables.
- Plexus box available on electrical
mechanism tables. 48� wide tables take
GM and EM configurations only.
Features
Perfect for classrooms and office
applications, adjustable height tables are
ADA compliant and adjustable for sitting
or standing while discreetly managing
power and data cables. Table is
available with either an electrical or
hand crank mechanism. All height
adjustable legs feature the Propeller C
Leg design allowing for enhanced leg
space and incorporating a vertical
channel for wire management.
Note:
Adjustable Height Tables are
available with glides only.
271
Manual Crank Mechanism:
Propeller hand crank adjustable height
tables include an intuitive manual
mechanism that allows one person to
raise and lower the table top from a
height of 28� to 41�. A discreet hand
crank is located under the worksurface
for easy access and operation. To operate
simply pull the hand crank from under
the table and rotate clockwise or counter
clockwise to raise or lower. The crank
can be readily interchanged between
right and left hands.
KnollStudio
Electrical Mechanism:
Propeller electrical height adjustable
table include an intuitive electric
mechanism that allows one person to
raise and lower the table top from a
height of 28� to 43 1 /2�. A discreet push
button control panel is located at the
front edge of the worksurface. To operate
simply plug the power cord in to a
receptacle and utilize the up and down
arrows to raise and lower the
worksurface. Three custom height
presets are available when quickly
interchanging between multiple users.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-F16-G-LP-R6-Y-J
P2-F16 24� x72�rectangle folding
table
G Glides
LP Craft Paper laminate
R6 Medium Grey 3mm
edgeband
Y No grommet
612 Medium Metallic Grey legs
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Grommet option
6. Leg/grommet finish
Emanuela Frattini
Propeller� Training Table Series
Rectangular Folding Tables and Dolly
description pattern no. w d h
clearance
between
legs w
clearance
between
legs d
P2-F Folding table P2-F14 60� 24� 28 1 /2� 52� 13 3 /4� 72
P2-F16 72� 24� 28 1 /2� 64� 13 3 /4� 81
P2-F24 60� 30� 28 1 /2� 52� 19 3 /4� 83
P2-F25 66� 30� 28 1 /2� 58� 19 3 /4� 89
P2-F26 72� 30� 28 1 /2� 64� 19 3 /4� 95
P2-F34 60� 36� 28 1 /2� 52� 25 3 /4� 95
P2-F36 72� 36� 28 1 /2� 64� 25 3 /4� 109
P2-DOLLY Table dolly with one handle P2-DOLLY24 60� 30� 32 1 /4�
P2-DOLLY26 72� 30� 32 1 /4�
P2-DOLLY34 60� 36� 32 1 /4�
P2-DOLLY36 72� 36� 32 1 /4�
P2-DOLLY-H Additional handle for table
dolly
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
P2-DOLLY-H
272
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
table
weight
(lbs.)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/casters:
Glides (suffix G)
Locking casters (suffix C)

pattern no. list price
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-F14 $1,545. $1,901. $3,352. $3,906.
P2-F16 1,662. 2,041. 3,406. 3,971.
P2-F24 1,662. 2,041. 3,441. 4,016.
P2-F25 1,719. 2,114. 3,469. 4,044.
P2-F26 1,777. 2,184. 3,491. 4,073.
P2-F34 1,777. 2,184. 3,508. 4,093.
P2-F36 1,890. 2,323. 3,586. 4,182.
P2-DOLLY24 1,222.
P2-DOLLY26 1,364.
P2-DOLLY34 1,364.
P2-DOLLY36 1,507.
P2-DOLLY-H 545.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter . Optional grommet mounted
power or communications receptacles
available, see page 354.
Grommet options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left and right, front (DG)
Two grommets, left and right, mid-depth
(AG)
Single grommet, center, front (EG)
Single grommet, center, right (HG)
Features
Connecting tables:
Each folding table, includes two
connector bars to connect rectangular
tops to each other on any side. 30�d and
36� d tables also connect to trapezoids of
same depth. When not needed,
connectors store in ports at top of table
leg.
Table dollies:
Table dollies can stack 5 folding tables.
Red urethane edge is scuff resistant,
bottom is medium grey laminate, handle
is stainless steel. Wheels are
self-lubricating steel bearings with
puncture-proof and impact-resistant
solid cushion tires, mounted on a
polypropylene hub.
Note:
Height of Propeller table folded is 4 1 /4�.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
273
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-H26-G-111-5-AG-J-P2-
K26-A
P2-H26 72� x30�standing height
table
G Glides
111 Jet Black laminate
5 Medium Grey edge
AG 2 grommets, mid-depth
612 Medium Metallic Grey
grommets and legs
P2-K26 Shelf for 72� x30�standing height table
A Aluminum shelf finish
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Grommet/Transact option
6. Grommet and leg finish
Specify shelf:
7. Pattern number
8. Shelf finish
Emanuela Frattini
Propeller� Training Table Series
Standing Height Tables
description pattern no. w d h
clearance
between
legs w
clearance
between
legs d
P2-H Standing height table P2-H12 48� 24� 38� 40� 13 3 /4� 66
P2-H14 60� 24� 38� 52� 13 3 /4� 75
P2-H16 72� 24� 38� 64� 13 3 /4� 85
P2-H22 48� 30� 38� 40� 19 3 /4� 75
P2-H24 60� 30� 38� 52� 19 3 /4� 87
P2-H26 72� 30� 38� 64� 19 3 /4� 99
P2-H32 48� 36� 38� 40� 25 3 /4� 85
P2-H34 60� 36� 38� 52� 25 3 /4� 99
P2-H36 72� 36� 38� 64� 25 3 /4� 113
P2-K Shelf for standing height table P2-K12 for
P2-H12
P2-K14 for
P2-H14
P2-K16 for
P2-H16
P2-K22 for
P2-H22
P2-K24 for
P2-H24
P2-K26 for
P2-H26
P2-K32 for
P2-H32
P2-K34 for
P2-H34
P2-K36 for
P2-H36
Finishes
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Woodgrain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
274
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded edgeband finishes:
Spring Green (suffix 1)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Black (suffix 6)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
table
weight
(lbs.)
Leg/grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)

pattern no. shelf
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-H12 * $1,201. $1,478. $2,918. $3,440.
P2-H14 1,318. 1,620. 2,972. 3,494.
P2-H16 1,431. 1,760. 3,031. 3,557.
P2-H22 * 1,318. 1,620. 2,980. 3,508.
P2-H24 1,431. 1,760. 3,060. 3,600.
P2-H26 1,545. 1,901. 3,113. 3,656.
P2-H32 * 1,431. 1,760. 3,175. 3,715.
P2-H34 1,545. 1,901. 3,247. 3,798.
P2-H36 1,662. 1,952. 3,324. 3,721.
P2-K12 494.
P2-K14 598.
P2-K16 704.
P2-K22 598.
P2-K24 704.
P2-K26 811.
P2-K32 704.
P2-K34 811.
P2-K36 913.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one,
or two grommets. All grommets are 3 1 /4�
diameter. Optional grommet mounted
power or communications receptacles
available, see page 354.
Grommet options: ($27 per cutout)
No grommet (Y)
Single grommet, left, mid-depth (BG)
Two grommets, left and right, front (DG)
Two grommets, left and right, mid-depth
(AG)
Single grommet, center, front (EG)
* AG, BG not available on 48� wide
tables
Plexus options: ($27 per cutout)
* Plexus Box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM)
For medium Plexus, left & right, front
(DM)
* AM, DM available for 72� wide tables
only
275
Features
Standing height tables:
Use Standing Height Tables
free-standing or connected to other
Standing Height Tables. Two connectors
provided with tables.
Standing height table shelf:
Optional shelf has to be specified
separately. Shelf is retro-fittable.
Shelf:
Perforated metal shelf has rolled edges
on all 4 sides. Powdercoat finish. Shelves
are installed at 12� below table top.
Legs:
Extruded aluminum construction with
clear satin anodized finish
or powder-coat finish. Wire management
flipper strips are flexible PVC. Leg end
caps are injection-molded, glass-filled
nylon. Leg mounting plates are
aluminum die-castings with a textured
paint finish. Black ribbed nylon glide or
black nylon caster.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1999
Order Code
Example: P2-Y30-SN-1-Y-A
P2-Y30 Propeller 30� round table,
3-star base
117 Soft Grey laminate
1 Spring Green edge
Y No grommet
A Anodized Aluminum base
Specify:
1. Pattern number
2. Top finish
3. Edge band selection (except for wood
top with wood edge)
4. Grommet option
5. Leg/grommet finish
Emanuela Frattini
Propeller� Column Base Tables
Round and Square Tables
description pattern no. w d h weight base
P2-Y Propeller round column base table P2-Y30 30� 28 1 /2� 44 3-star
P2-Y36 36� 28 1 /2� 54 3-star
P2-Y42 42� 28 1 /2� 71 4-star
P2-Y48 48� 28 1 /2� 85 4-star
P3-J Propeller round column base table P3-J30 30� 28 1 /2� 44 3-star
P3-J36 36� 28 1 /2� 54 3-star
P3-J42 42� 28 1 /2� 71 4-star
P3-J48 48� 28 1 /2� 85 4-star
P2-X Propeller square column base table P2-X30 30� 30� 28 1 /2� 53 4-star
P2-X36 36� 36� 28 1 /2� 67 4-star
P2-X42 42� 42� 28 1 /2� 83 4-star
P2-X48 48� 48� 28 1 /2� 102 4-star
P3-L Propeller square column base table P3-L30 30� 30� 28 1 /2� 53 4-star
P3-L36 36� 36� 28 1 /2� 67 4-star
P3-L42 42� 42� 28 1 /2� 83 4-star
P3-L48 48� 48� 28 1 /2� 102 4-star
Ordering Information
Colored laminate finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
276
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Molded/PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Spring Green (suffix 1) (Not for PVC
edge)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet and leg finishes:
Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)

pattern no.
laminate/
3mm edge
laminate/
molded edge
laminate/
PVC edge
laminate/
1 /2� wood edge
veneer/
PVC edge
veneer/
1 /4� wood edge
veneer/
3mm edge
P2-Y30 $1,102. $1,354. $3,545. $2,670.
P2-Y36 1,201. 1,476. 3,810. 2,807.
P2-Y42 1,430. 1,645. 4,326. 3,033.
P2-Y48 1,444. 1,651. 4,395. 3,110.
P3-J30 1,741. 3,738. 3,144.
P3-J36 1,770. 3,761. 3,293.
P3-J42 1,937. 3,760. 3,443.
P3-J48 2,081. 3,897. 3,591.
P2-X30 1,102. 1,354. 3,291. 2,531.
P2-X36 1,201. 1,476. 3,382. 2,623.
P2-X42 1,301. 1,599. 3,582. 2,809.
P2-X48 1,402. 1,724. 3,474. 2,828.
P3-L30 1,851. 2,860. 3,245.
P3-L36 1,784. 2,881. 3,362.
P3-L42 1,786. 2,735. 3,591.
P3-L48 1,925. 2,872. 3,744.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter. Optional grommet mounted
power or communications receptacles
available, see page 354 for details.
Grommet option: ($27 per cutout)
No grommet (suffix Y)
Single grommet, center (suffix GG)
Y
GG
Note:
- Plexus box not available on column
base tables.
Specification Information
The column base of the tables has one
integrated channel for wire management.
Cables are laid behind a translucent
PVC flipper strip and can be easily
pulled out. Wires can be brought to the
table top through an optional center
grommet.
Column profile:
277
Urethane table edge detail:
PVC table edge detail:
3mm flat edgeband:
Wood Edge:
Tables can be specified with either 1 /4�
wood edge with veneer top or 1 /2� wood
edge with laminate top.
Base:
Extruded aluminum column with
integrated wire management channel in
anodized or powder-coat finish. Silver
steel top attachment plate. Cast
aluminum star-base with protective
textured metallic surface coat matching
the column color. Leveling low black
nylon glides.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Emanuela Frattini
Propeller� Conference Table Series
Configurations and Product Information
Below are only a few examples of suggested configurations using Propeller
Conference tables and accessories.
Conference table types
Ordering
P3-HL
P3-RL
P3-AL
Specify:
1. Pattern number
2. Caster or glide selection (table
only).
3. Top finish selection
4. Edgeband selection
5. Grommet option
(table and bridge only)
6. Leg/grommet finish
P3-RL Rectangular table,
Std. legs
P2-IL Rectangular desk
return, C-Legs
P3-AL Bullet conference
table, T-legs
Bullet conference
table, Std. legs
P3-HL Rectangular table,
T-Legs
P3-IL Rounded rectangular
table, T-Legs
P3-J Round conference
table, column base
Construction
P3-CL
P3-IL
P3-DL
Top:
1 3 /16� thick, 3-ply, solid medium
density fiberboard core with
balanced backer sheet on bottom.
Solid veneer or plastic laminate.
Wood tops are cross veneered.
Threaded inserts are die-cast zinc.
Edges:
All table edges are finished,
allowing ganged tables to be
separated and used individually.
3mm flat edgeband, PVC, and solid
wood edge are available. On
rectangular tables with wood edges,
short sides have rectalinear edges
for ganging, long side edges are
chamferred.
278
The inherent flexibility of Propeller tables allows for diverse applications,
ranging from setups for conference rooms to private offices and workstations.
P3-EL, P4-BOXJ
Long side edge detail:
Solid wood or PVC
Short side edge detail:
Solid wood or PVC
P3-AL, P3-HL
P3-TL, P4-BOXM
3mm flat edgeband:
PVC flat edgeband, with integral
color.
Wood Edge Profiles:
AutoStrada and Saarinen edge
profiles are available as long side
edge details. On rectangular tables
with wood edges, short sides have
rectilinear edges for ganging, long
side edges are chamferred.
Long side edge detail:
AutoStrada profile = AE
Long side edge detail:
Saarinen profile = SE
Long side edge detail
Propeller profile = PE

Below are a few examples of private office and workstation configurations
using Propeller Conference tables and accessories. The possibilities of
connecting tables and accessories are virtually unlimited.
Conference area configurations
P5-1
P3-HL
P3-J
P2-I
P3-AL
P5-1
P4-TR
Legs:
Propeller’s S-shaped conference leg
incorporates two separate channels
for power and communications
wiring. Cables are laid behind
flexible translucent PVC flipper
strips to meet UL code. Vertical leg
is extruded aluminum construction
with clear satin anodized or powder
coat finish. Legs are 5�wx21 /4�d
with 25% greater capacity than the
training table leg. There are two
types of Propeller Conference legs:
Standard Conference legs and
T-Legs.
Conference Leg section
P5-1
P5-1
Standard Conference legs:
Leg mounting plates are steel
stampings with powder-coat finish.
Leg end caps are injection-molded,
glass-filled nylon. Black plastic
glide with 3 /4� levelling range or 2�
lockable black nylon caster.
T-Legs:
T-legs offer additional kneespace.
Cast aluminum end plates with
textured paint finish. Cast
aluminum foot in textured metallic
powder coat.
Conference
Leg T-Leg
P5-C
P5-C
279
All configurations utilize standard Propeller products which are grouped
according to desired application. Coordination of finishes allows for cohesive
aesthetic solutions.
P3-AL
P3-IL
P4-EASEL
Connecting Segments
Underside of worksurface is
pre-drilled with zinc inserts for
freestanding or bridging leg
position. Rectangular tops that are
78� and wider cannot be shared
between legs. Standard conference
leg includes screws for attachment
of mounting plate under
worksurface. Tool free option allows
reconfiguration using soft touch
hand screws. Kit includes: 8 soft
touch hand screws for 2 legs.
KnollStudio
Glides/casters:
Glides and locking casters-black
nylon.
Electrical options:
Electrical options include Grommet,
Quadruplex and Plexus box. Please
see Propeller Electrical section
beginning on page 344.
Shipping:
Tops and legs are shipped
separately. Legs ship knocked-down
into foot plate and vertical assembly.
Simple field assembly required.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-NL44-C-K-K-SE-AG-A-
W-K
P3-NL44 60� x42�rounded rectangle
table
C Locking casters
K Maple veneer top
K Maple veneer edge
SE Saarinen edge profile
AG Left and right grommets,
mid-depth
A Anodized grommets
W-K Maple wood legs
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option
7. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Round/Rounded Tables with Standard Legs
description pattern no. type w d h
clearancebetween
legs d
clearancebetween
legs w
no. of
legs
included
P3-DL Round table, with legs P3-DL48 48� 28 1 /2� 28 1 /2� 4 59
P3-DL54 54� 28 1 /2� 33 1 /2� 4 75
P3-DL60 60� 28 1 /2� 39� 4 92
P3-ML Rounded square table, with legs P3-ML42 42� 42� 28 1 /2� 20 1 /2� 4 47
P3-ML48 48� 48� 28 1 /2� 25 1 /2� 4 62
P3-ML54 54� 54� 28 1 /2� 30 1 /2� 4 80
P3-ML60 60� 60� 28 1 /2� 35 1 /2� 4 99
P3-NL Rounded rectangular table, with legs P3-NL44 60� 42� 28 1 /2� 27 1 /4� 25� 4 74
P3-NL46 66� 42� 28 1 /2� 33 1 /4� 25� 4 82
P3-NL48 72� 42� 28 1 /2� 39 1 /4� 25� 4 90
P3-NL50 78� 42� 28 1 /2� 45 1 /4� 25� 4 98
P3-NL52 84� 42� 28 1 /2� 51 1 /4� 25� 4 106
P3-NL54 90� 42� 28 1 /2� 57 1 /4� 25� 4 115
P3-NL56 96� 42� 28 1 /2� 63 1 /4� 25� 4 123
P3-NL64 60� 48� 28 1 /2� 28 1 /4� 25� 4 83
P3-NL66 66� 48� 28 1 /2� 34 1 /4� 25� 4 92
P3-NL68 72� 48� 28 1 /2� 40 1 /4� 25� 4 102
P3-NL70 78� 48� 28 1 /2� 46 1 /4� 25� 4 111
P3-NL72 84� 48� 28 1 /2� 52 1 /4� 25� 4 120
P3-NL74 90� 48� 28 1 /2� 58 1 /4� 25� 4 130
P3-NL76 96� 48� 28 1 /2� 64 1 /4� 25� 4 139
P3-NL88 72� 60� 28 1 /2� 41 1 /4� 27� 4 126
P3-NL90 78� 60� 28 1 /2� 47 1 /4� 27� 4 138
P3-NL92 84� 60� 28 1 /2� 53 1 /4� 27� 4 149
P3-NL94 90� 60� 28 1 /2� 59 1 /4� 27� 4 161
P3-NL96 96� 60� 28 1 /2� 65 1 /4� 27� 4 173
Conference wood legs Set of 4 W-( ) beech
W-(K) maple
Conference wood legs Set of 3 W-(K) maple
Conference wood legs Set of 3 W-( ) beech
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
280
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
top
weight
(lbs.)

pattern no.
wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-DL48 $1,758. $2,134. $4,337. $3,285. $3,673. $5,470. $5,743.
P3-DL54 2,140. 2,395. 4,710. 3,765. 4,117. 5,934. 6,231.
P3-DL60 2,144. 2,460. 4,815. 3,900. 4,294. 6,131. 6,437.
P3-ML42 2,123. 2,410. 4,654. 4,344. 4,745. 6,386. 6,706.
P3-ML48 2,133. 2,460. 4,759. 4,371. 4,908. 6,574. 6,902.
P3-ML54 2,236. 2,511. 4,864. 4,545. 5,067. 6,765. 7,103.
P3-ML60 2,939. 2,564. 4,971. 5,449. 5,229. 6,956. 7,304.
P3-NL44 2,231. 2,610. 5,421. 4,910. 5,470. 7,560. 7,937.
P3-NL46 2,296. 2,634. 5,568. 4,994. 5,539. 7,659. 8,042.
P3-NL48 2,298. 2,661. 5,717. 5,006. 5,611. 7,758. 8,146.
P3-NL50 2,301. 2,686. 5,863. 5,123. 5,682. 7,856. 8,249.
P3-NL52 2,304. 2,712. 6,012. 5,136. 5,753. 7,956. 8,354.
P3-NL54 2,307. 2,738. 6,161. 5,290. 5,822. 8,052. 8,455.
P3-NL56 2,312. 2,764. 6,309. 5,301. 5,892. 8,153. 8,562.
P3-NL64 2,292. 2,661. 5,717. 4,926. 5,619. 7,751. 8,138.
P3-NL66 2,298. 2,686. 5,863. 5,009. 5,690. 7,850. 8,243.
P3-NL68 2,301. 2,712. 6,012. 5,023. 5,759. 7,948. 8,345.
P3-NL70 2,304. 2,738. 6,161. 5,142. 5,829. 8,047. 8,450.
P3-NL72 2,308. 2,764. 6,309. 5,157. 5,900. 8,145. 8,551.
P3-NL74 2,312. 2,789. 6,456. 5,312. 5,969. 8,244. 8,656.
P3-NL76 2,315. 2,815. 6,603. 5,326. 6,039. 8,343. 8,760.
P3-NL88 2,465. 2,800. 6,456. 5,386. 5,985. 8,228. 8,640.
P3-NL90 2,468. 2,825. 6,603. 5,402. 6,056. 8,328. 8,745.
P3-NL92 2,472. 2,850. 6,743. 5,526. 6,126. 8,421. 8,841.
P3-NL94 2,477. 2,875. 6,884. 5,543. 6,196. 8,513. 8,938.
P3-NL96 2,480. 2,901. 7,027. 5,628. 6,265. 8,603. 9,034.
W-( ) 1,250.
W-(K) 1,720.
W-(K) 1,291.
W-( ) 939.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. See page 278 for details.
Optional grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth
(GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, left, mid-depth (BG)
Y
GG
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM) *
For jumbo Plexus, center, mid-depth
(GJ) *
For medium double Plexus, center,
mid-depth (GMD)
For medium double Plexus, left and
right, mid-depth (AMD) *
*for rounded rectangular tables only
281
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- Plexus box not available on 42� square
tables.
- Configurations AM, AMD and GJ not
available on 48�,54� and 60� square
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard conference legs.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-IL44-K-K-BG-P611
P3-IL44 60� x42�rounded rectangular table, T-Legs
K Maple top
K Maple edge
BG Single grommet, left
611 Beige Mist grommet and leg
finish
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option
6. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Rounded Table with T-Legs
description pattern no. top w d h leg type
P3-IL Rounded rectangular table, T-Legs P3-IL44 60� 42� 28 1 /2� T-Legs 74
P3-IL46 66� 42� 28 1 /2� T-Legs 82
P3-IL48 72� 42� 28 1 /2� T-Legs 90
P3-IL50 78� 42� 28 1 /2� T-Legs 98
P3-IL52 84� 42� 28 1 /2� T-Legs 106
P3-IL54 90� 42� 28 1 /2� T-Legs 115
P3-IL56 96� 42� 28 1 /2� T-Legs 123
P3-IL64 60� 48� 28 1 /2� T-Legs 83
P3-IL66 66� 48� 28 1 /2� T-Legs 92
P3-IL68 72� 48� 28 1 /2� T-Legs 102
P3-IL70 78� 48� 28 1 /2� T-Legs 111
P3-IL72 84� 48� 28 1 /2� T-Legs 120
P3-IL74 90� 48� 28 1 /2� T-Legs 130
P3-IL76 96� 48� 28 1 /2� T-Legs 139
P3-IL88 72� 60� 28 1 /2� T-Legs 126
P3-IL90 78� 60� 28 1 /2� T-Legs 138
P3-IL92 84� 60� 28 1 /2� T-Legs 147
P3-IL94 90� 60� 28 1 /2� T-Legs 161
P3-IL96 96� 60� 28 1 /2� T-Legs 173
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
282
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
top weight
(lbs.)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)

pattern no.
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood edge
(AE, SE)
P3-IL44 $2,546. $2,610. $5,421. $5,224. $5,470. $7,560. $7,937.
P3-IL46 2,610. 2,634. 5,568. 5,308. 5,539. 7,659. 8,042.
P3-IL48 2,614. 2,661. 5,717. 5,319. 5,611. 7,758. 8,146.
P3-IL50 2,617. 2,686. 5,863. 5,436. 5,682. 7,856. 8,249.
P3-IL52 2,621. 2,712. 6,012. 5,450. 5,753. 7,956. 8,354.
P3-IL54 2,623. 2,738. 6,161. 5,603. 5,822. 8,052. 8,455.
P3-IL56 2,628. 2,764. 6,309. 5,616. 5,892. 8,153. 8,562.
P3-IL64 2,610. 2,661. 5,717. 5,240. 5,619. 7,751. 8,138.
P3-IL66 2,613. 2,686. 5,863. 5,324. 5,690. 7,850. 8,243.
P3-IL68 2,616. 2,712. 6,012. 5,338. 5,759. 7,948. 8,345.
P3-IL70 2,619. 2,738. 6,161. 5,457. 5,829. 8,047. 8,450.
P3-IL72 2,623. 2,764. 6,309. 5,472. 5,900. 8,145. 8,551.
P3-IL74 2,626. 2,789. 6,456. 5,626. 5,969. 8,244. 8,656.
P3-IL76 2,632. 2,815. 6,603. 5,641. 6,039. 8,343. 8,760.
P3-IL88 2,780. 2,800. 6,456. 5,700. 5,985. 8,228. 8,640.
P3-IL90 2,783. 2,825. 6,603. 5,717. 6,056. 8,328. 8,745.
P3-IL92 2,789. 2,850. 6,743. 5,839. 6,126. 8,421. 8,841.
P3-IL94 2,792. 2,875. 6,884. 5,855. 6,196. 8,513. 8,938.
P3-IL96 2,795. 2,901. 7,027. 5,942. 6,265. 8,603. 9,034.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. See page 278 for details.
Optional grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium double Plexus, center,
mid-depth (GMD)
For medium double Plexus, left & right,
mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
283
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Specification Information
T-Leg conference tables:
T-Leg conference tables provide more leg
room for free-standing conference tables
while still offering wire management
capabilities. Each table has two T-Legs
positioned at 10� from rounded table
edges.
Connecting tables:
Conference tables with T-Legs are
free-standing and cannot be connected
with legs. However, they may be joined
with standard connecting hardware.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-BL42-C-DC-6-GG-A
P3-BL42 54� x42�bullet table
C Locking casters
DC Deep Cherry laminate top
6 Black edgeband
GG Single grommet, center
A Aluminum grommet and leg
finish
Specify:
1. Pattern number
2. Locking caster or glide selection
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option
7. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Bullet Table with Standard Legs
description pattern no. type w d h
clearance
btwn.
legs w
clearance
btwn.
legs d
P3-BL Bullet table, with legs P3-BL42 54� 42� 28 1 /2� 25 1 /2� 25� 4 70
P3-BL44 60� 42� 28 1 /2� 31 1 /2� 25� 4 78
P3-BL46 66� 42� 28 1 /2� 37 1 /2� 25� 4 86
P3-BL48 72� 42� 28 1 /2� 43 1 /2� 25� 4 94
P3-BL50 78� 42� 28 1 /2� 49 1 /2� 25� 4 102
P3-BL52 84� 42� 28 1 /2� 55 1 /2� 25� 4 111
P3-BL54 90� 42� 28 1 /2� 61 1 /2� 25� 4 119
P3-BL56 96� 42� 28 1 /2� 71 1 /4� 25� 4 127
P3-BL62 54� 48� 28 1 /2� 25 1 /2� 25� 4 79
P3-BL64 60� 48� 28 1 /2� 31 1 /2� 25� 4 88
P3-BL66 66� 48� 28 1 /2� 37 1 /2� 25� 4 98
P3-BL68 72� 48� 28 1 /2� 43 1 /2� 25� 4 107
P3-BL70 78� 48� 28 1 /2� 49 1 /2� 25� 4 116
P3-BL72 84� 48� 28 1 /2� 55 1 /2� 25� 4 126
P3-BL74 90� 48� 28 1 /2� 61 1 /2� 25� 4 135
P3-BL76 96� 48� 28 1 /2� 71 1 /2� 25� 4 145
P3-BL82 54� 60� 28 1 /2� 25 1 /2� 27� 4 98
P3-BL84 60� 60� 28 1 /2� 31 1 /2� 27� 4 110
P3-BL86 66� 60� 28 1 /2� 37 1 /2� 27� 4 122
P3-BL88 72� 60� 28 1 /2� 43 1 /2� 27� 4 133
P3-BL90 78� 60� 28 1 /2� 49 1 /2� 27� 4 145
P3-BL92 84� 60� 28 1 /2� 55 1 /2� 27� 4 157
P3-BL94 90� 60� 28 1 /2� 61 1 /2� 27� 4 168
P3-BL96 96� 60� 28 1 /2� 72 1 /4� 27� 4 180
Conference wood legs Set of 4 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
284
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
no. of
legs
incl.
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
top wgt
(lbs.)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-BL42 $2,230. $2,604. $5,717. $4,531. $4,998. $6,569. $6,897.
P3-BL44 2,233. 2,641. 5,787. 4,543. 5,095. 6,688. 7,023.
P3-BL46 2,335. 2,675. 5,857. 4,669. 5,196. 6,809. 7,149.
P3-BL48 2,338. 2,712. 5,926. 4,683. 5,294. 6,926. 7,273.
P3-BL50 2,341. 2,748. 5,998. 4,761. 5,392. 7,046. 7,399.
P3-BL52 2,346. 2,783. 6,069. 4,775. 5,491. 7,167. 7,525.
P3-BL54 2,349. 2,820. 6,139. 4,854. 5,590. 7,287. 7,651.
P3-BL56 2,353. 2,855. 6,208. 4,867. 5,690. 7,407. 7,778.
P3-BL62 2,232. 2,681. 5,863. 4,712. 5,189. 6,809. 7,149.
P3-BL64 2,237. 2,716. 5,934. 4,727. 5,286. 6,926. 7,273.
P3-BL66 2,338. 2,753. 6,005. 4,855. 5,386. 7,046. 7,399.
P3-BL68 2,341. 2,789. 6,075. 4,869. 5,484. 7,167. 7,525.
P3-BL70 2,346. 2,825. 6,145. 4,949. 5,582. 7,287. 7,651.
P3-BL72 2,348. 2,861. 6,217. 4,964. 5,682. 7,407. 7,778.
P3-BL74 2,351. 2,896. 6,288. 5,078. 5,781. 7,525. 7,901.
P3-BL76 2,356. 2,932. 6,356. 5,092. 5,878. 7,645. 8,028.
P3-BL82 2,387. 2,908. 6,309. 5,092. 5,765. 7,519. 7,894.
P3-BL84 2,392. 2,943. 6,378. 5,107. 5,863. 7,638. 8,020.
P3-BL86 2,518. 2,978. 6,448. 5,269. 5,963. 7,758. 8,146.
P3-BL88 2,522. 3,015. 6,519. 5,388. 6,061. 7,878. 8,272.
P3-BL90 2,526. 3,049. 6,592. 5,406. 6,161. 7,997. 8,398.
P3-BL92 2,530. 3,087. 6,661. 5,489. 6,259. 8,115. 8,522.
P3-BL94 2,533. 3,121. 6,731. 5,506. 6,356. 8,238. 8,649.
P3-BL96 2,538. 3,158. 6,800. 5,524. 6,456. 8,357. 8,775.
W-( ) 1,250.
W-(K) 1,720.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter, see page 278 for details.
Optional grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth
(GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes:($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For jumbo Plexus, center, mid-depth (GJ)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left & right,
mid-depth (AMD)
285
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard conference legs.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-AL68-118-4-GG-A
P3-AL68 72� x48�bullet conference
table, T-Legs
118 Bright White laminate top
4 Light Grey edge
GG Center grommet
A Anodized Aluminum
grommet and leg
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option
6. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Bullet Table with T-Legs
description pattern no. top w d h leg type
P3-AL Bullet conference table, T-Legs P3-AL42 54� 42� 28 1 /2� T-Legs 70
P3-AL44 60� 42� 28 1 /2� T-Legs 78
P3-AL46 66� 42� 28 1 /2� T-Legs 86
P3-AL48 72� 42� 28 1 /2� T-Legs 94
P3-AL50 78� 42� 28 1 /2� T-Legs 102
P3-AL52 84� 42� 28 1 /2� T-Legs 111
P3-AL54 90� 42� 28 1 /2� T-Legs 119
P3-AL56 96� 42� 28 1 /2� T-Legs 127
P3-AL62 54� 48� 28 1 /2� T-Legs 79
P3-AL64 60� 48� 28 1 /2� T-Legs 88
P3-AL66 66� 48� 28 1 /2� T-Legs 98
P3-AL68 72� 48� 28 1 /2� T-Legs 107
P3-AL70 78� 48� 28 1 /2� T-Legs 116
P3-AL72 84� 48� 28 1 /2� T-Legs 126
P3-AL74 90� 48� 28 1 /2� T-Legs 135
P3-AL76 96� 48� 28 1 /2� T-Legs 145
P3-AL82 54� 60� 28 1 /2� T-Legs 98
P3-AL84 60� 60� 28 1 /2� T-Legs 110
P3-AL86 66� 60� 28 1 /2� T-Legs 122
P3-AL88 72� 60� 28 1 /2� T-Legs 135
P3-AL90 78� 60� 28 1 /2� T-Legs 145
P3-AL92 84� 60� 28 1 /2� T-Legs 157
P3-AL94 90� 60� 28 1 /2� T-Legs 168
P3-AL96 96� 60� 28 1 /2� T-Legs 180
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
286
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
top weight
(lbs.)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)

pattern no.
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood edge
(AE, SE)
P3-AL42 $2,546. $2,604. $5,717. $4,845. $4,998. $6,569. $6,897.
P3-AL44 2,551. 2,641. 5,787. 4,857. 5,095. 6,688. 7,023.
P3-AL46 2,650. 2,675. 5,857. 4,984. 5,196. 6,809. 7,149.
P3-AL48 2,653. 2,712. 5,926. 4,996. 5,294. 6,926. 7,273.
P3-AL50 2,658. 2,748. 5,998. 5,076. 5,392. 7,046. 7,399.
P3-AL52 2,661. 2,783. 6,069. 5,087. 5,491. 7,167. 7,525.
P3-AL54 2,664. 2,820. 6,139. 5,166. 5,590. 7,287. 7,651.
P3-AL56 2,669. 2,855. 6,208. 5,180. 5,690. 7,407. 7,778.
P3-AL62 2,549. 2,681. 5,863. 5,026. 5,189. 6,809. 7,149.
P3-AL64 2,553. 2,600. 5,679. 5,040. 5,059. 6,628. 6,960.
P3-AL66 2,652. 2,753. 6,005. 5,169. 5,386. 7,046. 7,399.
P3-AL68 2,657. 2,789. 6,075. 5,182. 5,484. 7,167. 7,525.
P3-AL70 2,661. 2,825. 6,145. 5,263. 5,582. 7,287. 7,651.
P3-AL72 2,664. 2,861. 6,217. 5,277. 5,682. 7,407. 7,778.
P3-AL74 2,669. 2,896. 6,288. 5,392. 5,781. 7,525. 7,901.
P3-AL76 2,672. 2,932. 6,356. 5,406. 5,878. 7,645. 8,028.
P3-AL82 2,703. 2,908. 6,309. 5,406. 5,765. 7,519. 7,894.
P3-AL84 2,709. 2,943. 6,378. 5,421. 5,863. 7,638. 8,020.
P3-AL86 2,834. 2,978. 6,448. 5,583. 5,963. 7,758. 8,146.
P3-AL88 2,838. 3,015. 6,519. 5,702. 6,061. 7,878. 8,272.
P3-AL90 2,841. 3,049. 6,592. 5,718. 6,161. 7,997. 8,398.
P3-AL92 2,846. 3,087. 6,661. 5,805. 6,259. 8,115. 8,522.
P3-AL94 2,851. 3,121. 6,731. 5,821. 6,356. 8,238. 8,649.
P3-AL96 2,854. 3,158. 6,800. 5,836. 6,456. 8,357. 8,775.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter, see page 278 for details.
Optional grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options:($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth
(GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For jumbo Plexus, center, mid-depth (GJ)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left & right,
mid-depth (AMD)
287
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
T-Leg conference tables:
T-Leg conference tables provide more leg
room for free-standing conference tables
while still offering wire management
capabilities. Each table has two T-Legs
positioned at 10 7 /8� from flat table edges
and 10� from rounded table edges.
Connecting tables:
Conference tables with T-Legs are
free-standing and cannot be connected
with legs. However, they may be joined
with standard connecting hardware.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-RL56-C-Z-Z-SE-6-Y-A
P3-RL56 96� x42�rectangular table
C Locking casters
Z Medium Red Mahogany top
Z Medium Red Mahogany
edge
SE Saarinen edge profile
6 Black edgeband
Y No grommets
A Anodized Aluminum legs
Specify:
1. Pattern number
2. Locking castor or glide selection
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option
7. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Square/Rectangular Tables with Standard Legs
description pattern no. type w d h
clearance
btwn.
legs w
clearance
btwn.
legs d
P3-SL Square table, with legs P3-SL42 42� 42� 28 1 /2� 25 1 /4� 25� 4 57
P3-SL48 48� 48� 28 1 /2� 31 1 /4� 25� 4 75
P3-SL54 54� 54� 28 1 /2� 37 1 /4� 25� 4 95
P3-SL60 60� 60� 28 1 /2� 43 1 /4� 27� 4 117
P3-RL Rectangular table, with legs P3-RL40 48� 42� 28 1 /2� 31 1 /4� 25� 4 66
P3-RL42 54� 42� 28 1 /2� 37 1 /4� 25� 4 74
P3-RL44 60� 42� 28 1 /2� 43 1 /4� 25� 4 82
P3-RL46 66� 42� 28 1 /2� 49 1 /4� 25� 4 90
P3-RL48 72� 42� 28 1 /2� 55 1 /4� 25� 4 98
P3-RL50 78� 42� 28 1 /2� 61 1 /4� 25� 4 107
P3-RL52 84� 42� 28 1 /2� 67 1 /4� 25� 4 115
P3-RL54 90� 42� 28 1 /2� 73 1 /4� 25� 4 123
P3-RL56 96� 42� 28 1 /2� 79 1 /4� 25� 4 131
P3-RL62 54� 48� 28 1 /2� 37 1 /4� 25� 4 84
P3-RL64 60� 48� 28 1 /2� 43 1 /4� 25� 4 94
P3-RL66 66� 48� 28 1 /2� 49 1 /4� 25� 4 103
P3-RL68 72� 48� 28 1 /2� 55 1 /4� 25� 4 113
P3-RL70 78� 48� 28 1 /2� 55 1 /4� 25� 4 122
P3-RL72 84� 48� 28 1 /2� 55 1 /4� 25� 4 131
P3-RL74 90� 48� 28 1 /2� 55 1 /4� 25� 4 141
P3-RL76 96� 48� 28 1 /2� 55 1 /4� 25� 4 150
P3-RL80 48� 60� 28 1 /2� 31 1 /4� 27� 4 94
P3-RL82 54� 60� 28 1 /2� 37 1 /4� 27� 4 105
P3-RL86 66� 60� 28 1 /2� 49 1 /4� 27� 4 129
P3-RL88 72� 60� 28 1 /2� 55 1 /4� 27� 4 141
P3-RL90 78� 60� 28 1 /2� 61 1 /4� 27� 4 152
P3-RL92 84� 60� 28 1 /2� 67 1 /4� 27� 4 164
P3-RL94 90� 60� 28 1 /2� 73 1 /4� 27� 4 176
P3-RL96 96� 60� 28 1 /2� 79 1 /4� 27� 4 288
Conference wood legs Set of 4 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
288
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
no. of
legs
incl.
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
top
wgt.
(lbs.)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-SL42 $1,952. $2,281. $3,618. $3,529. $3,873. $4,908. $5,154.
P3-SL48 1,961. 2,430. 3,971. 3,555. 4,759. 5,491. 5,766.
P3-SL54 2,072. 2,579. 4,321. 3,882. 5,110. 6,271. 6,585.
P3-SL60 2,082. 2,727. 4,673. 3,985. 5,470. 6,259. 6,572.
P3-RL40 1,996. 2,353. 3,814. 3,944. 4,582. 5,301. 5,566.
P3-RL42 2,026. 2,388. 3,907. 3,991. 4,673. 5,401. 5,670.
P3-RL44 2,031. 2,424. 3,999. 4,003. 4,764. 5,498. 5,773.
P3-RL46 2,129. 2,460. 4,090. 4,127. 4,856. 5,597. 5,877.
P3-RL48 2,131. 2,498. 4,183. 4,138. 4,949. 5,696. 5,982.
P3-RL50 2,134. 2,532. 4,274. 4,151. 5,040. 5,792. 6,083.
P3-RL52 2,139. 2,570. 4,366. 4,325. 5,132. 5,892. 6,186.
P3-RL54 2,142. 2,604. 4,455. 4,336. 5,224. 5,991. 6,290.
P3-RL56 2,145. 2,641. 4,548. 4,348. 5,315. 6,090. 6,394.
P3-RL62 2,031. 2,466. 4,076. 4,170. 4,851. 5,590. 5,870.
P3-RL64 2,035. 2,503. 4,167. 4,181. 4,943. 5,690. 5,974.
P3-RL66 2,132. 2,537. 4,258. 4,305. 5,034. 5,787. 6,077.
P3-RL68 2,135. 2,573. 4,351. 4,319. 5,126. 5,885. 6,179.
P3-RL70 2,140. 2,610. 4,443. 4,333. 5,218. 5,985. 6,284.
P3-RL72 2,142. 2,645. 4,534. 4,443. 5,310. 6,084. 6,388.
P3-RL74 2,145. 2,681. 4,625. 4,456. 5,401. 6,182. 6,492.
P3-RL76 2,149. 2,716. 4,717. 4,469. 5,491. 6,279. 6,594.
P3-RL80 2,035. 2,649. 4,520. 4,186. 5,294. 6,069. 6,373.
P3-RL82 2,161. 2,686. 4,612. 4,407. 5,386. 6,168. 6,477.
P3-RL86 2,285. 2,758. 4,793. 4,575. 5,568. 6,364. 6,683.
P3-RL88 2,289. 2,794. 4,885. 4,591. 5,661. 6,463. 6,786.
P3-RL90 2,292. 2,830. 4,977. 4,608. 5,753. 6,562. 6,890.
P3-RL92 2,298. 2,866. 5,067. 4,785. 5,844. 6,661. 6,983.
P3-RL94 2,301. 2,901. 5,160. 4,802. 5,934. 6,759. 7,098.
P3-RL96 2,304. 2,936. 5,252. 4,818. 6,029. 6,856. 7,200.
W-( ) 1,250.
W-(K) 1,720.
Electrical
Features
+ For more detailed information, consult
the Electical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter, see page 278 for details.
Optional grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For jumbo Plexus, center, mid-depth (GJ)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left & right,
mid-depth (AMD)
289
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- Plexus box not available on 42� square
tables and 48�x42� tables.
- Configurations AM, AMD and GJ not
available on 48�,54� and 60� square
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchageable with
the standard training legs. Finishes
are compliemntary to Propeller veneer
tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P3-HL94-B-B-Y-A
P3-HL94 90� x60�rectangular table,
T-Legs
B Natural Beech veneer top
B Natural Beech veneer edge
Y No grommet
A Anodized Aluminum legs
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option
6. Grommet/leg finish
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Table with T-Legs
description pattern no. top w d h leg type
P3-HL Rectangular table, T-Legs P3-HL40 48� 42� 28 1 /2� T-Legs 66
P3-HL42 54� 42� 28 1 /2� T-Legs 74
P3-HL44 60� 42� 28 1 /2� T-Legs 82
P3-HL46 66� 42� 28 1 /2� T-Legs 90
P3-HL48 72� 42� 28 1 /2� T-Legs 98
P3-HL50 78� 42� 28 1 /2� T-Legs 107
P3-HL52 84� 42� 28 1 /2� T-Legs 115
P3-HL54 90� 42� 28 1 /2� T-Legs 123
P3-HL56 96� 42� 28 1 /2� T-Legs 131
P3-HL62 54� 48� 28 1 /2� T-Legs 84
P3-HL64 60� 48� 28 1 /2� T-Legs 94
P3-HL66 66� 48� 28 1 /2� T-Legs 103
P3-HL68 72� 48� 28 1 /2� T-Legs 113
P3-HL70 78� 48� 28 1 /2� T-Legs 122
P3-HL72 84� 48� 28 1 /2� T-Legs 131
P3-HL74 90� 48� 28 1 /2� T-Legs 141
P3-HL76 96� 48� 28 1 /2� T-Legs 150
P3-HL80 48� 60� 28 1 /2� T-Legs 94
P3-HL82 54� 60� 28 1 /2� T-Legs 105
P3-HL86 66� 60� 28 1 /2� T-Legs 129
P3-HL88 72� 60� 28 1 /2� T-Legs 141
P3-HL90 78� 60� 28 1 /2� T-Legs 152
P3-HL92 84� 60� 28 1 /2� T-Legs 164
P3-HL94 90� 60� 28 1 /2� T-Legs 176
P3-HL96 96� 60� 28 1 /2� T-Legs 188
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
290
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
top weight
(lbs.)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Casters (suffix C)

pattern no.
laminate/
3mm edg
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood edge
(AE, SE)
P3-HL40 $2,312. $2,353. $3,814. $4,257. $4,582. $5,301. $5,566.
P3-HL42 2,344. 2,388. 3,907. 4,305. 4,673. 5,401. 5,670.
P3-HL44 2,347. 2,424. 3,999. 4,317. 4,764. 5,498. 5,773.
P3-HL46 2,443. 2,460. 4,090. 4,441. 4,856. 5,597. 5,877.
P3-HL48 2,446. 2,498. 4,183. 4,452. 4,949. 5,696. 5,982.
P3-HL50 2,449. 2,532. 4,274. 4,465. 5,040. 5,792. 6,083.
P3-HL52 2,455. 2,570. 4,366. 4,639. 5,132. 5,892. 6,186.
P3-HL54 2,458. 2,604. 4,455. 4,650. 5,224. 5,991. 6,290.
P3-HL56 2,461. 2,641. 4,548. 4,663. 5,315. 6,090. 6,394.
P3-HL62 2,347. 2,466. 4,076. 4,483. 4,851. 5,590. 5,901.
P3-HL64 2,350. 2,503. 4,167. 4,496. 4,943. 5,690. 5,974.
P3-HL66 2,446. 2,537. 4,258. 4,620. 5,034. 5,787. 6,077.
P3-HL68 2,449. 2,573. 4,351. 4,634. 5,126. 5,885. 6,179.
P3-HL70 2,455. 2,610. 4,443. 4,646. 5,218. 5,985. 6,284.
P3-HL72 2,458. 2,645. 4,534. 4,758. 5,310. 6,084. 6,388.
P3-HL74 2,461. 2,681. 4,625. 4,770. 5,401. 6,182. 6,492.
P3-HL76 2,466. 2,716. 4,717. 4,783. 5,491. 6,279. 6,594.
P3-HL80 2,350. 2,649. 4,520. 4,501. 5,294. 6,069. 6,373.
P3-HL82 2,478. 2,686. 4,612. 4,720. 5,386. 6,168. 6,477.
P3-HL86 2,601. 2,758. 4,793. 4,889. 5,568. 6,364. 6,683.
P3-HL88 2,604. 2,794. 4,885. 4,905. 5,661. 6,463. 6,786.
P3-HL90 2,610. 2,830. 4,977. 4,922. 5,753. 6,562. 6,890.
P3-HL92 2,614. 2,866. 5,067. 5,100. 5,844. 6,661. 6,993.
P3-HL94 2,617. 2,901. 5,160. 5,116. 5,934. 6,759. 7,098.
P3-HL96 2,621. 2,936. 5,252. 5,132. 6,029. 6,856. 7,200.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter, see page 278 for location
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth
(GG)
Two grommets, left & right, mid depth
(AG)
Single grommet, left (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Table
segments may be specified with zero, one
or two cutouts. To specify plexus box and
for more information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For jumbo Plexus, center, mid-depth (GJ)
291
Note:
- Plexus not available on 48�x42�table.
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
T-Leg conference tables:
T-Leg conference tables provide more leg
room for free-standing conference tables
while still offering wire management
capabilities. Each table has two T-Legs
positioned at 10 7 /8� from flat table edges.
Connecting tables:
Conference tables with T-Legs are
free-standing and cannot be connected
with legs. However, they may be joined
with standard connecting hardware.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two Segment Conference Table with Standard Legs
description pattern no. type
P3-CL Rounded rectangular table, 2
segments, with legs
Note: Order 2 additional legs if tables will be seperated
Order Code
Example: P3-CL10-G-K-K-AE-HG-
HG-A
P3-CL10 108� x42�rounded rectangular table, 2
segments
G Glides
K Maple veneer top
K Maple veneer edge
AE Autostrada edge profile
HG Single grommet, outside,
segment A
HG Single grommet, outside,
segment B
A Anodized Aluminum
grommet and leg finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus cutout option,
segment B
8. Grommet/leg finish
Specify additional legs:
9. Pattern number
10. Leg finish
Conference wood legs Set of 6 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width A,
B
no. of
legs
included
top wgt
(lbs.)
P3-CL10 108� 42� 28 1 /2� 54� 6 140
P3-CL12 120� 42� 28 1 /2� 60� 6 156
P3-CL14 132� 42� 28 1 /2� 66� 6 172
P3-CL16 144� 42� 28 1 /2� 72� 6 188
P3-CL18 156� 42� 28 1 /2� 78� 6 204
P3-CL20 168� 42� 28 1 /2� 84� 6 222
P3-CL22 180� 42� 28 1 /2� 90� 6 238
P3-CL30 108� 48� 28 1 /2� 54� 6 158
P3-CL32 120� 48� 28 1 /2� 60� 6 176
P3-CL34 132� 48� 28 1 /2� 66� 6 196
P3-CL36 144� 48� 28 1 /2� 72� 6 214
P3-CL38 156� 48� 28 1 /2� 78� 6 232
P3-CL40 168� 48� 28 1 /2� 84� 6 252
P3-CL42 180� 48� 28 1 /2� 90� 6 270
P3-CL50 108� 60� 28 1 /2� 54� 6 196
P3-CL52 120� 60� 28 1 /2� 60� 6 220
P3-CL54 132� 60� 28 1 /2� 66� 6 244
P3-CL56 144� 60� 28 1 /2� 72� 6 266
P3-CL58 156� 60� 28 1 /2� 78� 6 290
P3-CL60 168� 60� 28 1 /2� 84� 6 314
P3-CL62 180� 60� 28 1 /2� 90� 6 336
292
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (C)

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rounded Three Segment Conference Tables with Standard Legs
description pattern no. type
P3-FL Rounded rectangular table, 3
segments, with legs
Note: Order 4 additional legs if table will be separated.
Order Code
Example: P3-FL10-G-SL-5-GG-
GMD-GG-612
P3-FL10 204� x42�rounded rectangular table, 3
segments
G Glides
SL Slate laminate tops
5 Medium Grey edgeband
GG Single grommet, center,
mid-depth, segment A
GMD Double medium plexus,
center, segment B
612 Medium Metallic Grey
grommet and leg finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus option, segment B
8. Grommet/Plexus option, segment C
Specify additioanl legs:
9. Pattern number
10. Leg finish
Conference wood legs Set of 8 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width
A,C
section
width
B
no. of
legs
incl.
top wgt
(lbs.)
P3-FL06 192� 42� 28 1 /2� 60� 72� 8 248
P3-FL10 204� 42� 28 1 /2� 72� 60� 8 262
P3-FL12 216� 42� 28 1 /2� 72� 72� 8 286
P3-FL14 228� 42� 28 1 /2� 78� 72� 8 302
P3-FL16 240� 42� 28 1 /2� 84� 72� 8 320
P3-FL18 252� 42� 28 1 /2� 90� 72� 8 336
P3-FL26 192� 48� 28 1 /2� 60� 72� 8 289
P3-FL30 204� 48� 28 1 /2� 72� 60� 8 308
P3-FL32 216� 48� 28 1 /2� 72� 72� 8 327
P3-FL34 228� 48� 28 1 /2� 78� 72� 8 345
P3-FL36 240� 48� 28 1 /2� 84� 72� 8 365
P3-FL38 252� 48� 28 1 /2� 90� 72� 8 383
P3-FL46 192� 60� 28 1 /2� 60� 72� 8 359
P3-FL50 204� 60� 28 1 /2� 72� 60� 8 383
P3-FL52 216� 60� 28 1 /2� 72� 72� 8 407
P3-FL54 228� 60� 28 1 /2� 78� 72� 8 431
P3-FL56 240� 60� 28 1 /2� 84� 72� 8 455
P3-FL58 252� 60� 28 1 /2� 90� 72� 8 477
294
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffixC)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-FL06 $5,834. $6,925. $14,419. $12,984. $13,918. $17,888. $18,783.
P3-FL10 6,021. 7,068. 14,784. 13,040. 14,284. 18,282. 19,196.
P3-FL12 6,117. 7,140. 14,965. 13,186. 14,466. 18,481. 19,406.
P3-FL14 6,140. 7,213. 15,109. 13,260. 14,666. 18,719. 19,655.
P3-FL16 6,162. 7,285. 15,249. 13,333. 14,862. 18,958. 19,907.
P3-FL18 6,186. 7,357. 15,390. 13,407. 15,058. 19,199. 20,159.
P3-FL26 6,000. 7,157. 15,010. 13,094. 14,429. 18,430. 19,350.
P3-FL30 6,180. 7,300. 15,291. 13,392. 14,825. 18,908. 19,853.
P3-FL32 6,204. 7,372. 15,430. 13,470. 15,023. 19,148. 20,104.
P3-FL34 6,227. 7,444. 15,573. 13,549. 15,219. 19,389. 20,359.
P3-FL36 6,251. 7,515. 15,713. 13,627. 15,419. 19,627. 20,608.
P3-FL38 6,275. 7,587. 15,854. 13,706. 15,615. 19,868. 20,860.
P3-FL46 6,253. 7,829. 16,431. 13,423. 16,143. 20,536. 21,564.
P3-FL50 6,592. 7,971. 16,713. 14,006. 16,524. 20,944. 21,991.
P3-FL52 6,617. 8,043. 16,854. 14,094. 16,713. 21,149. 22,206.
P3-FL54 6,641. 8,115. 16,996. 14,181. 16,909. 21,387. 22,457.
P3-FL56 6,669. 8,185. 17,136. 14,271. 17,108. 21,627. 22,709.
P3-FL58 6,694. 8,259. 17,276. 14,359. 17,305. 21,865. 22,959.
W-( ) 2,505.
W-(K) 3,444.
Electrical
+ For more detailed information. consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter, see
page 278 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options:($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth
(GJ)
295
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the aluminum conference leg.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rounded Four Segment Conference Tables with Standard Legs
description pattern no. type total w d h
P3-EL Rounded rectangular table, 4
segments, with legs
Note: Order 6 additional legs if tables will be separated.
Order Code
Example: P3-EL32-G-125-125-Y-
GM-GM-Y-A
P3-EL32 276� x48�rounded rectangular table, 4
segments
G Glides
125 Natural Maple laminate top
125 Natural Maple laminate
edge
Y No plexus, segment A
GM Single grommet, center,
mid-depth, segment B
GM Single grommet, center,
mid-depth, segment C
Y No plexus, segment D
A Aluminum grommet and leg
finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus cutout option,
segment B
8. Grommet/Plexus cutout option,
segment C
9. Grommet/Plexus sutout option,
segment D
10. Grommet.leg finish
Specify additional legs
11. Pattern number
12. Leg finish
Conference wood legs Set of 10 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
section
width
A,D
section
width
B,C
no. of
legs
incl.
top
wgt.
(lbs.)
P3-EL10 264� 42� 28 1 /2� 72� 60� 10 352
P3-EL12 276� 42� 28 1 /2� 78� 60� 10 368
P3-EL14 288� 42� 28 1 /2� 78� 66� 10 384
P3-EL16 300� 42� 28 1 /2� 84� 66� 10 402
P3-EL18 312� 42� 28 1 /2� 84� 72� 10 418
P3-EL20 324� 42� 28 1 /2� 90� 72� 10 434
P3-EL30 264� 48� 28 1 /2� 72� 60� 10 402
P3-EL32 276� 48� 28 1 /2� 78� 60� 10 420
P3-EL34 288� 48� 28 1 /2� 78� 66� 10 438
P3-EL36 300� 48� 28 1 /2� 84� 66� 10 458
P3-EL38 312� 48� 28 1 /2� 84� 72� 10 478
P3-EL40 324� 48� 28 1 /2� 90� 72� 10 496
P3-EL50 264� 60� 28 1 /2� 72� 60� 10 500
P3-EL52 276� 60� 28 1 /2� 78� 60� 10 524
P3-EL54 288� 60� 28 1 /2� 78� 66� 10 548
P3-EL56 300� 60� 28 1 /2� 84� 66� 10 572
P3-EL58 312� 60� 28 1 /2� 84� 72� 10 596
P3-EL60 324� 60� 28 1 /2� 90� 72� 10 618
296
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-EL10 $8,243. $8,458. $14,207. $18,126. $17,276. $20,189. $21,199.
P3-EL12 8,271. 8,529. 14,390. 18,214. 17,459. 20,387. 21,407.
P3-EL14 8,299. 8,603. 14,573. 18,305. 17,644. 20,585. 21,614.
P3-EL16 8,328. 8,674. 14,756. 18,393. 17,827. 20,780. 21,819.
P3-EL18 8,356. 8,746. 14,937. 18,484. 18,010. 20,980. 22,030.
P3-EL20 8,385. 8,817. 15,121. 18,573. 18,190. 21,177. 22,237.
P3-EL30 8,381. 8,767. 14,883. 18,558. 17,979. 20,951. 21,998.
P3-EL32 8,408. 8,837. 15,067. 18,653. 18,164. 21,149. 22,206.
P3-EL34 8,438. 8,909. 15,249. 18,746. 18,346. 21,345. 22,413.
P3-EL36 8,466. 8,981. 15,430. 18,840. 18,529. 21,543. 22,620.
P3-EL38 8,493. 9,053. 15,615. 18,935. 18,712. 21,739. 22,826.
P3-EL40 8,524. 9,125. 15,797. 19,032. 18,896. 21,937. 23,034.
P3-EL50 8,976. 9,658. 16,967. 19,461. 20,107. 23,245. 24,407.
P3-EL52 9,006. 9,738. 17,092. 19,564. 20,275. 23,430. 24,601.
P3-EL54 9,037. 9,802. 17,332. 19,670. 20,473. 23,641. 24,823.
P3-EL56 9,069. 9,864. 17,573. 19,776. 20,671. 23,850. 25,042.
P3-EL58 9,099. 9,935. 17,754. 19,879. 20,852. 24,049. 25,251.
P3-EL60 9,130. 10,006. 17,938. 19,986. 21,035. 24,245. 25,457.
W-( ) 3,137.
W-(K) 4,304.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter, see
page 278 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth
(GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
297
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the aluminum conference leg.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Two Segment Conference Table with Standard Legs
description pattern no. type
P3-SL Rectangular table, 2 segments with
legs
Note: Order 2 additional legs if tables will be seperated
Order Code
Example: P3-SL10-G-K-R5-BG-BG-
A
P3-SL10 108� x42�rectangular table, 2 segments
G Glides
K Maple veneer top
R5 Black edgeband
BG Single grommet, side,
segment A
BG Single grommet, side,
segment B
A Anodized Aluminum
grommet and leg finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus cutout option,
segment B
8. Grommet/leg finish
Specify additional legs:
9. Pattern number
10. Leg finish
Conference wood legs Set of 6 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width,
A,B
no. of
legs
incl.
top wgt.
(lbs.)
P3-SL10 108� 42� 28 1 /2� 54� 6 148
P3-SL12 120� 42� 28 1 /2� 60� 6 164
P3-SL14 132� 42� 28 1 /2� 66� 6 180
P3-SL16 144� 42� 28 1 /2� 72� 6 196
P3-SL30 108� 48� 28 1 /2� 54� 6 168
P3-SL32 120� 48� 28 1 /2� 60� 6 188
P3-SL34 132� 48� 28 1 /2� 66� 6 206
P3-SL36 144� 48� 28 1 /2� 72� 6 226
P3-SL50 108� 60� 28 1 /2� 54� 6 210
P3-SL52 120� 60� 28 1 /2� 60� 6 234
P3-SL53 132� 60� 28 1 /2� 66� 6 258
P3-SL56 144� 60� 28 1 /2� 72� 6 282
298
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Glides/Casters:
Glides (suffix G)
Locking Casters (C)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-SL10 $3,677. $4,390. $7,279. $7,495. $8,815. $10,264. $10,777.
P3-SL12 3,747. 4,460. 7,463. 7,519. 8,997. 10,461. 10,984.
P3-SL14 3,802. 4,532. 7,645. 7,764. 9,180. 10,659. 11,192.
P3-SL16 3,841. 4,603. 7,827. 7,806. 9,363. 10,854. 11,397.
P3-SL30 3,685. 4,542. 7,615. 7,852. 9,166. 10,644. 11,175.
P3-SL32 3,755. 4,614. 7,800. 7,877. 9,352. 10,843. 11,385.
P3-SL34 3,807. 4,686. 7,984. 8,126. 9,534. 11,039. 11,591.
P3-SL36 3,847. 4,758. 8,166. 8,152. 9,716. 11,236. 11,798.
P3-SL50 3,981. 4,984. 8,687. 8,355. 10,236. 11,798. 12,387.
P3-SL52 4,323. 5,065. 8,815. 8,663. 10,405. 11,982. 12,582.
P3-SL53 4,344. 5,126. 9,054. 8,704. 10,604. 12,192. 12,801.
P3-SL56 4,394. 5,197. 9,236. 8,771. 10,785. 12,390. 13,010.
W-( ) 1,881.
W-(K) 2,580.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter, see
page 278 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, right (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
299
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard conference legs.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Three Segment Conference Table with Standard Legs
description pattern no. type total w d h
P3-TL Rectangular table, 3 segments, with
legs
Note: Order 4 additional legs if tables will be seperated
Order Code
Example: P3-TL10-G-SL-5-GG-AG-
GG-612
P3-TL10 204� x42�rounded rectangular table, 3
segments
G Glides
SL Slate laminate top
5 Medium Grey edgeband
GG Single grommet, center,
segment A
AG Two grommets, left and
right, mid-depth, segment B
GG Single grommet, center,
segment C
612 Medium Metallic Grey
grommet and leg finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus cutout option,
segment B
8. Grommet/Plexus cutout option,
segment C
9. Grommet/leg finish
Specify additional legs:
10. Pattern number
11. Leg finish
Conference wood legs Set of 8 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffixC)
section
width
A,C
section
width
B
no. of
legs
incl.
top
wgt.
(lbs.)
P3-TL10 156� 42� 28 1 /2� 54� 48� 8 214
P3-TL12 168� 42� 28 1 /2� 60� 48� 8 230
P3-TL14 180� 42� 28 1 /2� 60� 60� 8 246
P3-TL16 192� 42� 28 1 /2� 66� 60� 8 262
P3-TL18 204� 42� 28 1 /2� 72� 60� 8 278
P3-TL20 216� 42� 28 1 /2� 72� 72� 8 294
P3-TL30 156� 48� 28 1 /2� 54� 48� 8 243
P3-TL32 168� 48� 28 1 /2� 60� 48� 8 263
P3-TL34 180� 48� 28 1 /2� 60� 60� 8 282
P3-TL36 192� 48� 28 1 /2� 66� 60� 8 300
P3-TL38 204� 48� 28 1 /2� 72� 60� 8 320
P3-TL40 216� 48� 28 1 /2� 72� 72� 8 339
P3-TL50 156� 60� 28 1 /2� 54� 48� 8 304
P3-TL52 168� 60� 28 1 /2� 60� 48� 8 328
P3-TL54 180� 60� 28 1 /2� 60� 60� 8 351
P3-TL56 192� 60� 28 1 /2� 66� 60� 8 375
P3-TL58 204� 60� 28 1 /2� 72� 60� 8 399
P3-TL60 216� 60� 28 1 /2� 72� 72� 8 423
300
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg and Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-TL10 $5,196. $6,352. $10,561. $11,009. $12,863. $15,030. $15,782.
P3-TL12 5,267. 6,423. 10,742. 11,033. 13,045. 15,228. 15,990.
P3-TL14 5,373. 6,496. 10,925. 11,049. 13,228. 15,424. 16,195.
P3-TL16 5,428. 6,567. 11,108. 11,296. 13,412. 15,622. 16,403.
P3-TL18 5,467. 6,638. 11,292. 11,337. 13,593. 15,819. 16,610.
P3-TL20 5,513. 6,711. 11,477. 11,480. 13,777. 16,016. 16,817.
P3-TL30 5,277. 6,581. 11,052. 11,555. 13,390. 15,600. 16,380.
P3-TL32 5,350. 6,654. 11,236. 11,590. 13,574. 15,797. 16,587.
P3-TL34 5,391. 6,726. 11,432. 11,615. 13,756. 15,995. 16,794.
P3-TL36 5,449. 6,797. 11,616. 11,875. 13,941. 16,191. 17,001.
P3-TL38 5,493. 6,869. 11,798. 11,913. 14,122. 16,390. 17,209.
P3-TL40 5,543. 6,942. 11,982. 12,060. 14,306. 16,585. 17,414.
P3-TL50 5,770. 7,243. 12,671. 12,441. 14,994. 17,332. 18,199.
P3-TL52 6,127. 7,325. 12,798. 12,776. 15,165. 17,516. 18,393.
P3-TL54 6,313. 7,402. 12,954. 12,969. 15,340. 17,704. 18,590.
P3-TL56 6,340. 7,464. 13,195. 13,031. 15,537. 17,918. 18,813.
P3-TL58 6,400. 7,535. 13,377. 13,121. 15,719. 18,113. 19,018.
P3-TL60 6,432. 7,603. 13,587. 13,163. 15,909. 18,317. 19,232.
W-( ) 2,505.
W-(K) 3,444.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter, see
page 278 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, side (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth
(GJ)
301
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the aluminum conference leg.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Four Segment Conference Table with Standard Legs
description pattern no. type total w d h
P3-VL Rectangular table, 4 segments, with
legs
Note: Order 6 additional legs if tables will be seperated
Order Code
Example: P3-VL32-125-125-Y-BG-
BG-Y-A
P3-VL32 276� x48�rounded rectangular table, 4
segments
125 Natural Maple laminate top
125 Natural Maple laminate
edge
Y No grommet, segment A
BG Single grommet, right,
segment B
BG Single grommet, right,
segment C
Y No grommet, segment D
A Aluminum grommet and leg
finish
Specify:
1. Pattern number
2. Locking caster or glide option
3. Top finish selection
4. Edgeband selection
5. Edge profile option (veneer/wood
edge only)
6. Grommet/Plexus cutout option,
segment A
7. Grommet/Plexus cutout option,
segment B
8. Grommet/Plexus cutout option,
segment C
9. Grommet/Plexus cutout option,
segment D
10. Grommet/leg finish
Specify additional legs:
11. Pattern number
12. Leg finish
Conference wood legs Set of 10 W-( ) beech
W-(K) maple
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
section
width
A,D
section
width
B,C
no. of
legs
incl.
top
wgt.
(lbs.)
P3-VL10 228� 42� 28 1 /2� 60� 54� 10 312
P3-VL12 240� 42� 28 1 /2� 60� 60� 10 328
P3-VL14 252� 42� 28 1 /2� 66� 60� 10 344
P3-VL16 264� 42� 28 1 /2� 66� 66� 10 360
P3-VL18 276� 42� 28 1 /2� 72� 66� 10 376
P3-VL20 288� 42� 28 1 /2� 72� 72� 10 392
P3-VL30 228� 48� 28 1 /2� 60� 54� 10 356
P3-VL32 240� 48� 28 1 /2� 60� 60� 10 376
P3-VL34 252� 48� 28 1 /2� 66� 60� 10 394
P3-VL36 264� 48� 28 1 /2� 66� 66� 10 412
P3-VL38 276� 48� 28 1 /2� 72� 66� 10 432
P3-VL40 288� 48� 28 1 /2� 72� 72� 10 452
P3-VL50 228� 60� 28 1 /2� 60� 54� 10 444
P3-VL52 240� 60� 28 1 /2� 60� 60� 10 468
P3-VL54 252� 60� 28 1 /2� 66� 60� 10 492
P3-VL56 264� 60� 28 1 /2� 66� 66� 10 516
P3-VL58 276� 60� 28 1 /2� 72� 66� 10 540
P3-VL60 288� 60� 28 1 /2� 72� 72� 10 564
302
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
Wood leg finishes:
For wood leg finish, add letter W to the
end of pattern number and specify
desired wood leg finish (e.g. W-K for
maple legs). On all tables with wood legs,
grommet cover will be in an anodized
finish only.
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)

pattern no.
Wood legs
upcharge
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-VL10 $6,915. $8,458. $14,207. $14,519. $17,276. $20,189. $21,199.
P3-VL12 6,993. 8,529. 14,390. 14,567. 17,459. 20,387. 21,407.
P3-VL14 7,063. 8,603. 14,573. 14,863. 17,644. 20,585. 21,547.
P3-VL16 7,127. 8,674. 14,756. 15,134. 17,827. 20,780. 21,819.
P3-VL18 7,175. 8,746. 14,937. 15,201. 18,010. 20,980. 22,030.
P3-VL20 7,225. 8,817. 15,121. 15,264. 18,190. 21,177. 22,237.
P3-VL30 7,000. 8,767. 14,883. 15,458. 17,979. 20,951. 21,998.
P3-VL32 7,081. 8,837. 15,067. 15,512. 18,164. 21,149. 22,206.
P3-VL34 7,144. 8,909. 15,249. 15,790. 18,346. 21,345. 22,413.
P3-VL36 7,206. 8,981. 15,430. 16,070. 18,529. 21,543. 22,620.
P3-VL38 7,256. 9,053. 15,615. 16,123. 18,712. 21,739. 22,826.
P3-VL40 7,307. 9,125. 15,797. 16,177. 18,896. 21,937. 23,034.
P3-VL50 7,981. 9,658. 16,967. 17,045. 20,107. 23,245. 24,407.
P3-VL52 8,346. 9,738. 17,092. 17,395. 20,275. 23,430. 24,601.
P3-VL54 8,379. 9,802. 17,332. 17,465. 20,473. 23,641. 24,823.
P3-VL56 8,408. 9,864. 17,573. 17,536. 20,671. 23,850. 25,042.
P3-VL58 8,472. 9,935. 17,754. 17,634. 20,852. 24,049. 25,251.
P3-VL60 8,538. 10,006. 17,938. 17,732. 21,035. 24,245. 25,457.
W-( ) 3,137.
W-(K) 4,304.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter, see
page 278 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, right (BG)
Plexus Cutout Options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
303
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
- AM and AMD are not appropriate
for stand alone tables or end
segments.
Features
Wood Conference Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the aluminum conference leg.
Finishes are complimentary to Propeller
veneer tops.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio

Emanuela Frattini
Propeller� Conference Table Series
Conference Tables with Drum and Peanut Base Product
Information
Below are only a few examples of suggested configurations using Propeller
Conference tables with Drum and Peanut base.
Table types and configurations
P3-NP
P3-RD
P3-BD
P3-FP
Ordering Information Contruction
Specify:
1. Pattern number
2. 2. Top finish selection
3. 3. Edgeband selection
4. 4. Grommet option
5. 5. Base finish
*D/P, D= Drum base, P= Peanut base
P3-RD/P Rectangular table
P3-BD/P Bullet conference table
P3-ND/P Rounded rectangular table
P3-DD/P Round conference table
P3-SD/P Square conference table
P3-BD/P Rounded square table
P3-SD/P Rectangular table, 2 segments
P3-TD/P Rectangular table, 3 segments
P3-VD/P Rectangular table, 4 segments
P3-CD/P Rounded rectangular table, 2
segments
P3-FD/P Rounded rectangular table, 3
segments
P3-ED/P Rounded rectangular table, 4
segments
P3-SD
P3-DD
Top:
1 3 /16� thick, 3-ply, solid medium
density fiberboard core with
balanced backer sheet on bottom.
Solid veneer or plastic laminate.
Wood tops are cross veneered.
Threaded inserts are die-cast zinc.
Edges:
All table edges are finished,
allowing ganged tables to be
separated and used individually;
3mm flat edgeband, PVC, and solid
wood edge are available. On
rectangular tables with wood edges,
short sides have rectilinear edges
for ganging, long side edges are
chamferred.
304
The inherent flexibility of Propeller tables allows for applications Ideal for
conference rooms and break-out areas.
P3-ED
Long side edge detail:
Solid wood or PVC
Short side edge detail:
Solid wood or PVC
P3-TD
P3-SP
3mm flat edgeband:
PVC flat edgeband, with integral
color.
Wood Edge Profiles:
AutoStrada and Saarinen edge
profiles are available as long side
edge details. On rectangular tables
with wood edges, short sides have
rectilinear edges for ganging, long
side edges are chamferred. Please
contact your Knoll representative ro
CPD for pricing.
Long side edge detail:
AutoStrada profile = AE
Long side edge detail:
Saarinen profile = SE
Long side edge detail:
Propeller profile = PE

Conference tables with Drum and Peanut bases offer enhanced wire
management capability and unobstructed kneespace. On most tables drum
and peanut bases will be located at the center of the table or segment, some
exceptions arise on tables with three and four segments, where a base is
shared between two segments.
Side panels:
The side panels of the Drum are
available in 18-gauge perforated
metal with a silver powder coat finish
or solid veneer (same finishes as
veneer tops). Veneer panels interior
finish, black powder coat sheet
metal.
Panels feature black nylon fastners
and are easily removable without
tools, providing immediate access to
wiring, in compliance with UL
guidelines.
Table with drum base
All 48� deep tables feature a 18�
drum with 25� footplate.
All 48� square, rounded square,
single base rectangular and bullet
tables feature a 18� drum with 30�
footplate. Also used on 54� round
tables
All 60� width tables including the
round and rounded square tables
feature a 23� drum with 30� footplate.
Peanut base
All 42�,48�, and 60� tables feature
the 27� x8� Peanut base.
Installation
Field attachment of Drum and
Peanut base to table top is necessary.
Some larger configurations require
attachment of support frame. Tops
ship with pre-drilled holes for frame
attachment.
Connecting plate:
For configurations using more than
one segment, tops must connected
using connector plates (included in
box), inserted in pre-drilled holes.
305
Three different sizes of Drum bases are offered, to suit different depth tables.
Certain larger tables may required support frames under the table top. A
Peanut base suits all table sizes.
P4S-BOXM( )
P4SD-BOXM( )
Leveling: Drum base
All Drums have leveling nuts to
allow for irregularities in the floor.
Leveling: Peanut base
All peanut bases have leveling glides
to allow for irregularities in the floor.
KnollStudio
Electrical options
Tables with Drum and Peanut bases
can be hardwired using pre-wired or
empty Plexus boxes or plugged-in
with Plexus boxes with cordset. All
Drum and Peanut base tables can
accomodate shallow medium plexus
boxes; 60� tables can also
accomodate double wide shallow
medium boxes. Please specifiy boxes
separately.
All Drum and Peanut bases feature
internal wire management hooks.
The drum base includes an 11�
cut-out in the footplate to allow
enclosure of floor power monuments.
The Peanut base has an opening in
its base of up to 8� deep and 27�
wide, to allow enclosure of floor
power monuments.
Electrical options:
Compatible with shallow Plexus
Boxes. All Drum/Peanut bases
feature internal wire managment
hooks. All tables with frames ship
also ship with wire management
C-clips.
Shipping:
Tops, Drum/Peanut bases and frames
are shipped separately. Drum and
Peanut bases ship fully-assembled.
Support frames, required for some
larger tables are shipped in a box.
Tops are predrilled for frame or base.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-ND64-K-K-PE-GM-WK
P3-ND64 60� x48�Rounded rectangular table
K Maple veneer top
K Maple veneer edge
PE Propeller edge profile
GM Center plexus
WK Maple veneer drum finish
($559 upcharge)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option
6. Drum base finish (upcharge for
veneer drum)
Emanuela Frattini
Propeller� Conference Table Series
Round/Rounded, Square/Rectangular and Bullet Tables with
Drum Base
description pattern no. w d h
base
size
no. of
drums frame
P3-DD Round table with drum base P3-DD48 48� 28 1 /2� S 1 N 142
P3-DD54 54� 28 1 /2� M 1 N 173
P3-DD60 60� 28 1 /2� L 1 N 202
P3-MD Rounded square table with drum
base
P3-ND Rounded rectangular table, with
drum base
table
weight
(lbs.)
P3-MD48 48� 28 1 /2� M 1 N 160
P3-MD54 54� 28 1 /2� M 1 N 178
P3-MD60 60� 28 1 /2� L 1 N 209
P3-ND64 60� 48� 28 1 /2� M 1 N 181
P3-BD Bullet table, with drum base P3-BD62 54� 48� 28 1 /2� M 1 N 177
P3-BD64 60� 48� 28 1 /2� M 1 N 186
P3-BD82 54� 60� 28 1 /2� L 1 N 208
P3-BD84 60� 60� 28 1 /2� L 1 N 220
P3-BD86 66� 60� 28 1 /2� L 1 N 232
P3-SD Square table with drum base P3-SD48 48� 28 1 /2� M 1 N 173
P3-SD54 54� 28 1 /2� M 1 N 193
P3-SD60 60� 28 1 /2� L 1 N 227
P3-RD Rectangular table with drum base P3-RD62 54� 48� 28 1 /2� M 1 N 182
P3-RD64 60� 48� 28 1 /2� M 1 N 192
P3-RD80 48� 60� 28 1 /2� L 1 N 204
P3-RD82 54� 60� 28 1 /2� L 1 N 215
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
306
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)

pattern no. veneer drum
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge
veneer/wood
edge (AE, SE)
P3-DD48 $3,241. $3,215. $5,048. $4,631. $4,740. $6,350. $6,669.
P3-DD54 3,529. 3,506. 5,468. 5,008. 5,131. 6,801. 7,140.
P3-DD60 3,621. 3,604. 5,554. 5,223. 5,357. 7,015. 7,367.
P3-MD48 3,524. 3,505. 5,361. 5,598. 5,725. 7,252. 7,615.
P3-MD54 3,625. 3,619. 5,580. 5,767. 5,911. 7,472. 7,846.
P3-MD60 3,719. 3,724. 5,690. 6,056. 6,215. 7,788. 8,177.
P3-ND64 3,683. 3,692. 5,884. 6,139. 6,300. 8,227. 8,639.
P3-BD62 3,624. 3,617. 6,254. 5,930. 6,074. 7,516. 7,891.
P3-BD64 3,626. 3,626. 6,280. 5,945. 6,095. 7,585. 7,963.
P3-BD82 3,863. 3,862. 6,666. 6,381. 6,539. 7,899. 8,294.
P3-BD84 3,867. 3,874. 6,692. 6,397. 6,566. 8,096. 8,501.
P3-BD86 3,994. 4,003. 6,944. 6,554. 6,730. 8,283. 8,696.
P3-SD48 3,349. 3,396. 4,483. 4,804. 4,923. 5,919. 6,216.
P3-SD54 3,464. 3,529. 4,759. 5,122. 5,257. 6,325. 6,641.
P3-SD60 3,556. 3,630. 4,883. 5,303. 5,452. 6,551. 6,878.
P3-RD62 3,420. 3,479. 4,830. 5,402. 5,767. 6,495. 6,820.
P3-RD64 3,424. 3,489. 4,856. 5,414. 5,790. 6,532. 6,858.
P3-RD80 3,508. 3,568. 4,931. 5,500. 5,870. 6,615. 6,946.
P3-RD82 3,636. 3,706. 5,188. 5,715. 6,111. 6,865. 7,207.
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Drum Base Finishes:
Perforated Aluminum (suffix A)
Veneer Drum Base Finishes (upcharge
applies)
For veneer drum base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
drum finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
1 base (small and medium) $613
1 base (large) $736
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet Option:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter, see page 304 for details.
Optional grommet-mounted power or
communications receptacles
available, see page 354.
Grommet: ($38 upcharge per cutout)
For no grommet: (suffix Y)
For center grommet: (GG)
For mid depth grommet, left and right:
(AG)
307
Plexus Option:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. Tables may be
specified with zero, one or two cutouts.
All drum base and peanut tables can
accommodate shallow medium plexus
boxes, 60� tables can also accommodate
double wide shallow medium plexus
boxes. To specify plexus box and for
more information, see pages 344-352.
Plexus locations: ($38 upcharge per
cutout)
For no plexus: (suffix Y)
For center plexus: (GM)
For center double plexus: (GMD)
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion shipped with c-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
In most cases Drum bases will be located
at the center of the table or segment -
some exceptions arise on the
multi-segment tables, where some drums
are shared between two segments.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-CD34-117-R5-AM-AM-
AM-AM-A
P3-CD34 48� x 132� Rounded
rectangular table
117 Soft Grey laminate top
R5 Black opaque 3mm
edgeband
AM Medium plexus, left and
right, segment A
AM Medium plexus, left and
right, segment B
AM Medium plexus, left and
right, segment C
AM Medium plexus, left and
right, segment D
A Perforated drum anodized
finish
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Drum base finish (upcharge for
veneer drum)
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two, Three and Four Segment Conference Tables with
Drum Base
description pattern no.
P3-CD Rounded rectangular table, 2
segments, with drum base
P3-FD Rounded rectangular table, 3
segments, with drum base
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
total
w d h
section
width,
outside
section
width, base
inside size
no. of
drums frame
table
wgt.
(lbs.)
P3-CD30 108� 48� 28 1 /2� 54� S 2 N 324
P3-CD32 120� 48� 28 1 /2� 60� S 2 N 342
P3-CD34 132� 48� 28 1 /2� 66� S 2 N 362
P3-CD36 144� 48� 28 1 /2� 72� S 2 Y 380
P3-CD38 156� 48� 28 1 /2� 78� S 2 Y 398
P3-CD40 168� 48� 28 1 /2� 84� S 2 Y 501
P3-CD50 108� 60� 28 1 /2� 54� L 2 N 416
P3-CD52 120� 60� 28 1 /2� 60� L 2 N 440
P3-CD54 132� 60� 28 1 /2� 66� L 2 N 464
P3-CD56 144� 60� 28 1 /2� 72� L 2 Y 486
P3-CD58 156� 60� 28 1 /2� 78� L 2 Y 510
P3-CD60 168� 60� 28 1 /2� 84� L 2 Y 534
P3-FD26 192� 48� 28 1 /2� 60� 72� S 3 Y 538
P3-FD30 204� 48� 28 1 /2� 72� 60� S 3 Y 557
P3-FD32 216� 48� 28 1 /2� 72� 72� S 3 Y 576
P3-FD34 228� 48� 28 1 /2� 78� 72� S 3 Y 594
P3-FD36 240� 48� 28 1 /2� 84� 72� S 3 Y 614
P3-FD38 252� 48� 28 1 /2� 90� 72� S 3 Y 632
P3-FD46 192� 60� 28 1 /2� 60� 72� L 3 Y 689
P3-FD50 204� 60� 28 1 /2� 72� 60� L 3 Y 632
P3-FD52 216� 60� 28 1 /2� 72� 72� L 3 Y 737
P3-FD54 228� 60� 28 1 /2� 78� 72� L 3 Y 761
P3-FD56 240� 60� 28 1 /2� 84� 72� L 3 Y 785
P3-FD58 252� 60� 28 1 /2� 90� 72� L 3 Y 807
308
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Drum Base finishes:
Perforated Aluminum (suffix A)
Veneer Drum Base finishes: (upcharge
applies)
For veneer drum base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
drum finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases (small) $1,227
2 bases (large) $1,471
3 bases (small) $1,840
3 bases (large) $2,207
4 bases (small) $2,454
4 bases (large) $2,943

pattern no. veneer drum
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-CD30 $6,845. $6,842. $12,449. $11,334. $11,615. $13,980. $14,679.
P3-CD32 6,852. 6,866. 12,504. 11,361. 11,660. 14,057. 14,760.
P3-CD34 6,983. 7,006. 12,783. 11,532. 11,959. 14,278. 14,993.
P3-CD36 8,080. 8,078. 13,868. 12,615. 12,948. 15,449. 16,222.
P3-CD38 8,295. 8,300. 14,117. 12,845. 13,194. 15,732. 16,518.
P3-CD40 10,652. 10,577. 16,385. 15,148. 15,514. 18,160. 19,068.
P3-CD50 7,514. 7,513. 13,137. 11,884. 12,195. 14,569. 15,298.
P3-CD52 7,520. 7,537. 13,196. 11,915. 12,245. 14,651. 15,383.
P3-CD54 7,790. 7,813. 13,732. 12,252. 12,599. 15,045. 15,796.
P3-CD56 8,890. 8,886. 14,815. 13,343. 13,704. 16,220. 17,031.
P3-CD58 8,600. 8,624. 14,593. 13,089. 13,469. 16,005. 16,805.
P3-CD60 8,696. 8,734. 14,733. 13,206. 13,606. 16,176. 16,984.
P3-FD26 12,467. 12,328. 19,090. 19,000. 19,377. 22,043. 23,146.
P3-FD30 12,647. 12,591. 20,233. 19,290. 19,758. 22,768. 23,908.
P3-FD32 12,868. 12,819. 20,498. 19,556. 20,043. 23,105. 24,261.
P3-FD34 13,168. 13,125. 20,855. 19,902. 20,405. 23,522. 24,698.
P3-FD36 13,192. 13,165. 20,920. 19,978. 20,498. 23,664. 24,847.
P3-FD38 13,630. 13,603. 21,388. 20,455. 20,994. 24,219. 25,429.
P3-FD46 13,477. 13,229. 19,852. 20,051. 20,360. 23,028. 24,178.
P3-FD50 13,816. 13,755. 22,232. 20,619. 21,132. 24,253. 25,466.
P3-FD52 14,036. 13,985. 22,499. 20,895. 21,424. 24,600. 25,831.
P3-FD54 14,341. 14,291. 22,861. 21,250. 21,797. 25,030. 26,282.
P3-FD56 14,367. 14,333. 22,927. 21,336. 21,899. 25,182. 26,441.
P3-FD58 14,805. 14,772. 23,402. 21,823. 22,405. 25,750. 27,037.
Electrical
+ For more detailed information. consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes.
Individual table segments may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth
(GJ)
309
Features
Maintenance:
See pages 27 - 28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion and is shipped with C-clips for
wire management. For tables without a
frame, please see page 342 to specify
clips seperately.
Base Location:
In most cases Drum bases will be located
at the center of the table or segment -
some exceptions arise on the
multi-segment tables, where some drums
are shared between two segments.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-CD34-117-R5-AM-AM-
AM-AM-A
P3-CD34 48� x 132� Rounded
rectangular table
117 Soft Grey laminate top
R5 Black opaque 3mm
edgeband
AM Medium plexus, left and
right, segment A
AM Medium plexus, left and
right, segment B
AM Medium plexus, left and
right, segment C
AM Medium plexus, left and
right, segment D
A Perforated drum anodized
finish
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Drum base finish (upcharge for
veneer drum)
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two, Three and Four Segment Conference Tables with
Drum Base
description pattern no.
P3-ED Rounded rectangular table, 4
segments, with drum base
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
total
w d h
section
width,
outside
section
width, base
inside size
no. of
drums frame
table
wgt.
(lbs.)
P3-ED30 264� 48� 28 1 /2� 72� 60� S 3 Y 651
P3-ED32 276� 48� 28 1 /2� 78� 60� S 3 Y 669
P3-ED34 288� 48� 28 1 /2� 78� 66� S 3 Y 687
P3-ED50 264� 60� 28 1 /2� 72� 60� L 3 Y 830
P3-ED52 276� 60� 28 1 /2� 78� 60� L 3 Y 854
P3-ED54 288� 60� 28 1 /2� 78� 66� L 3 Y 878
P3-ED36 300� 48� 28 1 /2� 84� 66� S 4 Y 790
P3-ED38 312� 48� 28 1 /2� 84� 72� S 4 Y 810
P3-ED40 324� 48� 28 1 /2� 90� 72� S 4 Y 828
P3-ED56 300� 60� 28 1 /2� 84� 66� L 4 Y 1012
P3-ED58 312� 60� 28 1 /2� 84� 72� L 4 Y 1036
P3-ED60 324� 60� 28 1 /2� 90� 72� L 4 Y 1058
310
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Drum Base finishes:
Perforated Aluminum (suffix A)
Veneer Drum Base finishes: (upcharge
applies)
For veneer drum base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
drum finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases (small) $1,227
2 bases (large) $1,471
3 bases (small) $1,840
3 bases (large) $2,207
4 bases (small) $2,454
4 bases (large) $2,943

pattern no. veneer drum
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-ED30 $15,242. $15,215. $22,470. $24,701. $25,305. $28,479. $29,904.
P3-ED32 15,448. 15,428. 22,719. 24,962. 25,583. 28,815. 30,256.
P3-ED34 15,475. 15,473. 22,776. 25,054. 25,691. 28,944. 30,392.
P3-ED50 15,839. 15,842. 24,028. 25,577. 26,238. 29,812. 31,303.
P3-ED52 16,045. 16,057. 24,280. 25,848. 26,526. 30,160. 31,668.
P3-ED54 16,076. 16,103. 24,339. 25,952. 26,646. 30,333. 31,850.
P3-ED36 17,912. 17,827. 27,771. 27,476. 28,132. 31,845. 33,438.
P3-ED38 17,994. 17,921. 27,771. 27,618. 28,291. 32,060. 33,663.
P3-ED40 18,437. 18,363. 28,386. 28,113. 28,801. 32,635. 34,268.
P3-ED56 18,516. 18,460. 29,369. 28,383. 29,097. 32,916. 34,561.
P3-ED58 18,598. 18,556. 29,511. 28,539. 29,266. 33,143. 34,800.
P3-ED60 19,042. 19,001. 29,994. 29,041. 29,789. 33,731. 35,417.
Electrical
+ For more detailed information. consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes.
Individual table segments may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth
(GJ)
311
Features
Maintenance:
See pages 27 - 28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion and is shipped with C-clips for
wire management. For tables without a
frame, please see page 342 to specify
clips seperately.
Base Location:
In most cases Drum bases will be located
at the center of the table or segment -
some exceptions arise on the
multi-segment tables, where some drums
are shared between two segments.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-SD30-V421-R5-AM-
AM-WB
P3-SD30 48� x 108� rect. table
V421 Chalk Oak veneer top
R5 Black opaque 3mm
edgeband
AM Medium plexus, left and
right, mid-depth, segment A
AM Medium plexus, left and
right, mid-depth, segment B
WK Beech veneer drum finish
(upchg. $1,118)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Drum base finish (upcharge for
veneer drum)
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Two, Three and Four Segment Conference Tables
with Drum Base
description pattern no.
P3-SD Rectangular table, 2 segments, with
drum base
P3-TD Rectangular table, 3 segments, with
drum base
P3-VD Rectangular table, 4 segments, with
drum base
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
width d h
section
width,
outside
section
width, base
inside size
no. of
drums frame
table
weight
(lbs.)
P3-SD30 108� 48� 28 1 /2� 54� S 2 N 334
P3-SD32 120� 48� 28 1 /2� 60� S 2 N 354
P3-SD34 132� 48� 28 1 /2� 66� S 2 N 372
P3-SD36 144� 48� 28 1 /2� 72� S 2 Y 392
P3-SD50 108� 60� 28 1 /2� 54� L 2 N 430
P3-SD52 120� 60� 28 1 /2� 60� L 2 N 454
P3-SD53 132� 60� 28 1 /2� 66� L 2 N 478
P3-SD56 144� 60� 28 1 /2� 72� L 2 Y 502
P3-TD30 156� 48� 28 1 /2� 54� 48� S 2 Y 409
P3-TD32 168� 48� 28 1 /2� 60� 48� S 2 Y 494
P3-TD50 156� 60� 28 1 /2� 54� 48� L 2 Y 524
P3-TD52 168� 60� 28 1 /2� 60� 48� L 2 Y 548
P3-TD34 180� 48� 28 1 /2� 60� 60� S 3 N 549
P3-TD36 192� 48� 28 1 /2� 66� 60� S 3 N 549
P3-TD38 204� 48� 28 1 /2� 72� 60� S 3 Y 569
P3-TD40 216� 48� 28 1 /2� 72� 72� S 3 Y 588
P3-TD54 180� 60� 28 1 /2� 60� 60� L 3 N 705
P3-TD56 192� 60� 28 1 /2� 66� 60� L 3 N 705
P3-TD58 204� 60� 28 1 /2� 72� 60� L 3 Y 669
P3-TD60 216� 60� 28 1 /2� 72� 72� L 3 Y 753
P3-VD30 228� 48� 28 1 /2� 60� 54� S 3 Y 605
P3-VD32 240� 48� 28 1 /2� 60� 60� S 3 Y 625
P3-VD34 252� 48� 28 1 /2� 66� 60� S 3 Y 643
P3-VD36 264� 48� 28 1 /2� 66� 66� S 3 Y 765
P3-VD38 276� 48� 28 1 /2� 72� 66� S 3 Y 681
P3-VD40 288� 48� 28 1 /2� 72� 72� S 3 Y 701
P3-VD50 228� 60� 28 1 /2� 60� 54� L 3 Y 774
P3-VD52 240� 60� 28 1 /2� 60� 60� L 3 Y 798
P3-VD54 252� 60� 28 1 /2� 66� 60� L 3 Y 822
P3-VD56 264� 60� 28 1 /2� 66� 66� L 3 Y 846
P3-VD58 276� 60� 28 1 /2� 72� 66� L 3 Y 870
P3-VD60 288� 60� 28 1 /2� 72� 72� L 3 Y 894
312
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Drum Base finishes:
Perforated Aluminum (suffix A)
Veneer Drum Base finishes: (upcharge
applies)
For veneer drum base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
drum finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases (small) $1,227
2 bases (large) $1,471
3 bases (small) $1,840
3 bases (large) $2,207

pattern no. veneer drum
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-SD30 $6,677. $6,773. $9,659. $10,537. $11,232. $12,722. $13,358.
P3-SD32 6,748. 6,860. 9,714. 10,562. 11,278. 12,799. 13,439.
P3-SD34 6,801. 6,933. 10,296. 10,803. 11,555. 13,114. 13,769.
P3-SD36 7,934. 8,038. 11,376. 11,887. 12,656. 14,278. 14,993.
P3-SD50 7,478. 7,576. 10,814. 11,514. 12,263. 13,879. 14,573.
P3-SD52 7,819. 7,947. 11,531. 11,814. 12,604. 14,258. 14,971.
P3-SD53 7,840. 7,985. 11,565. 11,853. 12,662. 14,305. 15,020.
P3-SD56 8,983. 9,101. 12,680. 12,976. 13,809. 15,523. 16,299.
P3-TD30 9,077. 9,232. 13,630. 14,921. 15,939. 18,189. 19,099.
P3-TD32 9,237. 9,407. 13,775. 15,041. 16,079. 18,364. 19,281.
P3-TD50 10,075. 10,244. 15,232. 16,269. 17,375. 19,818. 20,810.
P3-TD52 10,518. 10,711. 16,063. 16,679. 17,829. 20,320. 21,336.
P3-TD34 10,155. 10,307. 14,634. 15,913. 16,972. 19,291. 20,255.
P3-TD36 10,213. 10,383. 15,232. 16,166. 17,261. 19,621. 20,601.
P3-TD38 11,959. 12,077. 16,897. 17,851. 18,965. 21,412. 22,483.
P3-TD40 12,206. 12,334. 17,410. 18,185. 19,327. 21,815. 22,906.
P3-TD54 11,831. 12,003. 17,536. 17,961. 19,141. 21,709. 22,795.
P3-TD56 11,860. 12,048. 17,590. 18,023. 19,224. 21,786. 22,875.
P3-TD58 13,624. 13,761. 19,305. 19,758. 20,984. 23,645. 24,827.
P3-TD60 13,851. 13,999. 19,539. 19,989. 21,233. 23,912. 25,107.
P3-VD30 13,450. 13,626. 19,534. 21,285. 22,677. 25,792. 27,081.
P3-VD32 13,529. 13,725. 19,613. 21,334. 22,748. 25,901. 27,197.
P3-VD34 14,006. 14,203. 20,620. 22,007. 23,458. 26,672. 28,005.
P3-VD36 14,071. 14,286. 21,241. 22,279. 23,769. 27,029. 28,380.
P3-VD38 14,295. 14,521. 21,485. 22,501. 24,011. 27,314. 28,680.
P3-VD40 14,345. 14,590. 21,565. 22,550. 24,084. 27,425. 28,796.
P3-VD50 15,186. 15,386. 22,570. 23,560. 25,095. 28,548. 29,976.
P3-VD52 15,552. 15,781. 23,340. 23,899. 25,477. 28,981. 30,429.
P3-VD54 15,998. 16,226. 23,793. 24,369. 25,969. 29,482. 30,955.
P3-VD56 16,028. 16,275. 23,854. 24,437. 26,061. 29,565. 31,043.
P3-VD58 16,268. 16,525. 24,141. 24,702. 26,350. 29,910. 31,405.
P3-VD60 16,332. 16,609. 24,261. 24,797. 26,470. 30,079. 31,583.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
313
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame ships
with C-clips for wire mangement. For
tables without a frame, please see page
342 to specify clips seperately.
Base Location:
In most cases Drum bases will be located
at the center of the table or segment -
some exceptions arise on the
multi-segment tables, where some drums
are shared between two segments.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-BP52-W-JW-Y-A
P3-BP52 84� x42�Rectangular table
118 Bright White laminate top
JW Frosty white 3mm edge
Y No grommet
A Anodized aluminum base
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option
6. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Bullet, Rounded and Rectangular Conference Tables with Peanut
Base
description pattern no. w d h frame no. of bases
P3-BP Bullet table, with peanut base P3-BP50 78� 42� 28 1 /2� N 2
P3-BP52 84� 42� 28 1 /2� N 2
P3-BP54 90� 42� 28 1 /2� N 2
P3-BP56 96� 42� 28 1 /2� N 2
P3-BP70 78� 48� 28 1 /2� N 2
P3-BP72 84� 48� 28 1 /2� N 2
P3-BP74 90� 48� 28 1 /2� N 2
P3-BP76 96� 48� 28 1 /2� N 2
P3-BP96 96� 60� 28 1 /2� N 2
P3-NP Rounded rectangular table, with
peanut base
P3-NP50 78� 42� 28 1 /2� N 2
P3-NP52 84� 42� 28 1 /2� N 2
P3-NP54 90� 42� 28 1 /2� N 2
P3-NP56 96� 42� 28 1 /2� N 2
P3-NP70 78� 48� 28 1 /2� N 2
P3-NP72 84� 48� 28 1 /2� N 2
P3-NP74 90� 48� 28 1 /2� N 2
P3-NP76 96� 48� 28 1 /2� N 2
P3-NP96 96� 60� 28 1 /2� N 2
P3-RP Rectangular table, with peanut base P3-RP50 78� 42� 28 1 /2� N 2
P3-RP52 84� 42� 28 1 /2� N 2
P3-RP54 90� 42� 28 1 /2� N 2
P3-RP56 96� 42� 28 1 /2� N 2
P3-RP70 78� 48� 28 1 /2� N 2
P3-RP72 84� 48� 28 1 /2� N 2
P3-RP74 90� 48� 28 1 /2� N 2
P3-RP76 96� 48� 28 1 /2� N 2
P3-RP96 96� 60� 28 1 /2� N 2
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
314
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases $2,943

pattern no. veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-BP50 $4,164. $4,160. $6,926. $6,397. $6,566. $8,107. $8,513.
P3-BP52 4,167. 4,173. 6,952. 6,409. 6,587. 8,143. 8,550.
P3-BP54 4,172. 4,185. 6,977. 6,486. 6,671. 8,244. 8,657.
P3-BP56 4,176. 4,196. 7,003. 6,498. 6,694. 8,280. 8,694.
P3-BP70 4,167. 4,172. 6,941. 6,579. 6,758. 8,307. 8,722.
P3-BP72 4,172. 4,184. 6,967. 6,593. 6,778. 8,342. 8,759.
P3-BP74 4,176. 4,196. 6,993. 6,705. 6,900. 8,480. 8,904.
P3-BP76 4,179. 4,208. 7,019. 6,719. 6,921. 8,515. 8,940.
P3-BP96 4,362. 4,398. 7,405. 7,138. 7,358. 8,995. 9,445.
P3-NP50 4,124. 4,131. 6,478. 6,750. 6,928. 8,931. 9,378.
P3-NP52 4,129. 4,144. 6,503. 6,762. 6,949. 8,965. 9,414.
P3-NP54 4,130. 4,153. 6,530. 6,911. 7,107. 9,144. 9,601.
P3-NP56 4,134. 4,169. 6,556. 6,923. 7,127. 9,178. 9,637.
P3-NP70 4,128. 4,144. 6,480. 6,768. 6,957. 8,948. 9,396.
P3-NP72 4,131. 4,155. 6,506. 6,782. 6,979. 8,985. 9,434.
P3-NP74 4,134. 4,167. 6,533. 6,934. 7,138. 9,163. 9,620.
P3-NP76 4,138. 4,178. 6,559. 6,947. 7,160. 9,200. 9,660.
P3-NP96 4,302. 4,357. 6,856. 7,241. 7,474. 9,498. 9,972.
P3-RP50 3,958. 4,028. 5,510. 5,801. 6,193. 6,986. 7,335.
P3-RP52 3,962. 4,039. 5,535. 5,971. 6,386. 7,198. 7,557.
P3-RP54 3,965. 4,053. 5,561. 5,984. 6,406. 7,231. 7,593.
P3-RP56 3,968. 4,063. 5,589. 5,996. 6,427. 7,267. 7,632.
P3-RP70 3,962. 4,038. 5,529. 5,979. 6,391. 7,194. 7,553.
P3-RP72 3,965. 4,051. 5,555. 6,087. 6,516. 7,338. 7,706.
P3-RP74 3,970. 4,062. 5,582. 6,100. 6,539. 7,376. 7,744.
P3-RP76 3,973. 4,074. 5,609. 6,113. 6,559. 7,414. 7,784.
P3-RP96 4,128. 4,245. 5,939. 6,451. 6,938. 7,818. 8,210.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4� in
diameter. Grommet cover finish will
always be Anodized Aluminum, see
page 304 for details. Optional
grommet-mounted power or
communications receptacles available,
see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Single grommet, right, mid-depth (HG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Tables
may be specified with zero, one or two
cutouts. To specify plexus box and for
more information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
315
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes C-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note that on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-CP10-K-K-SE-AM-GM-
GM-AM-WK
P3-CP10 108� x42�rounded rect.
table
K Maple veneer top
K Maple wood edge
SE Saarinen edge detail
AM Medium plexus, left and
right, mid-depth, segment A
GM Medium plexus, center,
mid-depth, segment B
GM Medium plexus, center,
mid-depth, segment C
AM Medium plexus, left and
right, mid-depth, segment D
WK Maple veneer base
(upcharge applies)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two, Three and Four Segment Conference Tables with
Peanut Base
description pattern no.
P3-CP Rounded rectangular table, 2
segments, with peanut base
P3-FP Rounded rectangular table, 3
segments, with peanut base
Ordering Information
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width,
outside
section
width,
inside frame
P3-CP10 108� 42� 28 1 /2� 54� Y 2
P3-CP12 120� 42� 28 1 /2� 60� Y 2
P3-CP14 132� 42� 28 1 /2� 66� Y 2
P3-CP16 144� 42� 28 1 /2� 72� Y 2
P3-CP18 156� 42� 28 1 /2� 78� Y 2
P3-CP30 108� 48� 28 1 /2� 54� Y 2
P3-CP32 120� 48� 28 1 /2� 60� Y 2
P3-CP34 132� 48� 28 1 /2� 66� Y 2
P3-CP36 144� 48� 28 1 /2� 72� Y 2
P3-CP38 156� 48� 28 1 /2� 78� Y 2
P3-CP50 108� 60� 28 1 /2� 54� Y 2
P3-CP52 120� 60� 28 1 /2� 60� Y 2
P3-CP54 132� 60� 28 1 /2� 66� Y 2
P3-CP56 144� 60� 28 1 /2� 72� Y 2
P3-CP58 156� 60� 28 1 /2� 78� Y 2
P3-CP20 168� 42� 28 1 /2� 84� Y 3
P3-CP22 180� 42� 28 1 /2� 90� Y 3
P3-CP40 168� 48� 28 1 /2� 84� Y 3
P3-CP42 180� 48� 28 1 /2� 90� Y 3
P3-CP60 168� 60� 28 1 /2� 84� Y 3
P3-CP62 180� 60� 28 1 /2� 90� Y 3
P3-FP06 192� 42� 28 1 /2� 60� 72� Y 3
P3-FP10 204� 42� 28 1 /2� 72� 60� Y 3
P3-FP12 216� 42� 28 1 /2� 72� 72� Y 3
P3-FP14 228� 42� 28 1 /2� 78� 72� Y 3
P3-FP16 240� 42� 28 1 /2� 84� 72� Y 3
316
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
no. of
bases
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases $2,943
3 bases $4,414
4 bases $5,885

pattern no. veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-CP10 $6,031. $6,044. $11,667. $10,522. $10,789. $13,129. $13,787.
P3-CP12 6,037. 6,070. 11,724. 10,549. 10,831. 13,205. 13,865.
P3-CP14 6,405. 6,437. 12,225. 10,943. 11,243. 13,661. 14,345.
P3-CP16 6,412. 6,461. 12,280. 10,969. 11,286. 13,735. 14,422.
P3-CP18 6,626. 6,685. 12,531. 11,194. 11,531. 14,017. 14,717.
P3-CP30 6,037. 6,066. 11,689. 10,553. 10,834. 13,173. 13,832.
P3-CP32 6,045. 6,091. 11,745. 10,581. 10,879. 13,250. 13,912.
P3-CP34 6,411. 6,459. 12,247. 10,979. 11,295. 13,709. 14,395.
P3-CP36 6,418. 6,482. 12,303. 11,007. 11,338. 13,787. 14,475.
P3-CP38 6,634. 6,707. 12,554. 11,237. 11,586. 14,071. 14,775.
P3-CP50 6,201. 6,254. 11,905. 10,613. 10,925. 13,258. 13,920.
P3-CP52 6,207. 6,280. 11,961. 10,648. 10,977. 13,340. 14,007.
P3-CP54 6,714. 6,782. 12,721. 11,210. 11,559. 13,971. 14,669.
P3-CP56 6,724. 6,807. 12,776. 11,244. 11,608. 14,054. 14,756.
P3-CP58 6,938. 7,030. 13,029. 11,478. 11,859. 14,344. 15,061.
P3-CP20 8,472. 8,473. 14,315. 13,000. 13,352. 15,929. 16,726.
P3-CP22 8,583. 8,595. 14,467. 13,125. 13,494. 16,107. 16,912.
P3-CP40 8,479. 8,495. 14,339. 13,044. 13,410. 15,985. 16,786.
P3-CP42 8,589. 8,619. 14,492. 13,170. 13,556. 16,166. 16,974.
P3-CP60 8,784. 8,811. 14,815. 13,292. 13,692. 16,263. 17,077.
P3-CP62 8,896. 8,941. 14,969. 13,424. 13,841. 16,450. 17,273.
P3-FP06 10,037. 9,985. 16,913. 16,700. 17,066. 19,599. 20,578.
P3-FP10 10,222. 10,315. 17,944. 16,754. 17,270. 20,137. 21,143.
P3-FP12 10,516. 10,545. 18,209. 17,088. 17,552. 20,467. 21,490.
P3-FP14 10,816. 10,848. 18,564. 17,426. 17,909. 20,879. 21,923.
P3-FP16 10,840. 10,888. 18,626. 17,499. 17,998. 21,015. 22,065.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut base tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
317
Note:
- Double Plexus AMD and GMD
configurations not available on 42� and
48� deep tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes c-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-CP10-K-K-SE-AM-GM-
GM-AM-WK
P3-CP10 108� x42�rounded rect.
table
K Maple veneer top
K Maple wood edge
SE Saarinen edge detail
AM Medium plexus, left and
right, mid-depth, segment A
GM Medium plexus, center,
mid-depth, segment B
GM Medium plexus, center,
mid-depth, segment C
AM Medium plexus, left and
right, mid-depth, segment D
WK Maple veneer base
(upcharge applies)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two, Three and Four Segment Conference Tables with
Peanut Base
description pattern no.
P3-FP Rounded rectangular table, 3
segments, with peanut base
P3-EP Rounded rectangular table, 4
segments, with peanut base
Ordering Information
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width,
outside
section
width,
inside frame
P3-FP18 252� 42� 28 1 /2� 90� 72� Y 3
P3-FP26 192� 48� 28 1 /2� 60� 72� Y 3
P3-FP30 204� 48� 28 1 /2� 72� 60� Y 3
P3-FP32 216� 48� 28 1 /2� 72� 72� Y 3
P3-FP34 228� 48� 28 1 /2� 78� 72� Y 3
P3-FP36 240� 48� 28 1 /2� 84� 72� Y 3
P3-FP38 252� 48� 28 1 /2� 90� 72� Y 3
P3-FP46 192� 60� 28 1 /2� 60� 72� Y 3
P3-FP50 204� 60� 28 1 /2� 72� 60� Y 3
P3-FP52 216� 60� 28 1 /2� 72� 72� Y 3
P3-FP54 228� 60� 28 1 /2� 78� 72� Y 3
P3-FP56 240� 60� 28 1 /2� 84� 72� Y 3
P3-FP58 252� 60� 28 1 /2� 90� 72� Y 3
P3-EP10 264� 42� 28 1 /2� 72� 60� Y 3
P3-EP12 276� 42� 28 1 /2� 78� 60� Y 3
P3-EP14 288� 42� 28 1 /2� 78� 66� Y 3
P3-EP16 300� 42� 28 1 /2� 84� 66� Y 3
P3-EP30 264� 48� 28 1 /2� 72� 60� Y 3
P3-EP32 276� 48� 28 1 /2� 78� 60� Y 3
P3-EP34 288� 48� 28 1 /2� 78� 66� Y 3
P3-EP50 264� 60� 28 1 /2� 72� 60� Y 3
P3-EP52 276� 60� 28 1 /2� 78� 60� Y 3
P3-EP54 288� 60� 28 1 /2� 78� 66� Y 3
P3-EP18 312� 42� 28 1 /2� 84� 72� Y 4
P3-EP20 324� 42� 28 1 /2� 90� 72� Y 4
P3-EP36 300� 48� 28 1 /2� 84� 66� Y 4
318
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
no. of
bases
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases $2,943
3 bases $4,414
4 bases $5,885

pattern no. veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-FP18 $11,277. $11,324. $19,095. $17,974. $18,488. $21,564. $22,642.
P3-FP26 10,202. 10,156. 16,959. 16,808. 17,185. 19,779. 20,767.
P3-FP30 10,382. 10,420. 18,104. 17,097. 17,565. 20,502. 21,527.
P3-FP32 10,603. 10,648. 18,368. 17,364. 17,850. 20,839. 21,882.
P3-FP34 10,904. 10,953. 18,724. 17,709. 18,213. 21,257. 22,320.
P3-FP36 10,928. 10,993. 18,789. 17,786. 18,306. 21,400. 22,469.
P3-FP38 11,365. 11,431. 19,258. 18,262. 18,801. 21,954. 23,052.
P3-FP46 10,455. 10,330. 17,012. 17,128. 17,436. 20,007. 21,007.
P3-FP50 10,794. 10,858. 19,389. 17,696. 18,207. 21,233. 22,295.
P3-FP52 11,016. 11,087. 19,659. 17,971. 18,500. 21,579. 22,658.
P3-FP54 11,319. 11,396. 20,020. 18,326. 18,871. 22,009. 23,110.
P3-FP56 11,345. 11,436. 20,087. 18,410. 18,976. 22,161. 23,269.
P3-FP58 11,783. 11,874. 20,560. 18,899. 19,479. 22,729. 23,865.
P3-EP10 12,841. 12,886. 20,143. 22,087. 22,663. 25,687. 26,970.
P3-EP12 13,046. 13,098. 20,390. 22,343. 22,938. 26,016. 27,317.
P3-EP14 13,073. 13,142. 20,448. 22,430. 23,042. 26,140. 27,447.
P3-EP16 14,450. 14,480. 24,413. 23,823. 24,451. 27,642. 29,025.
P3-EP30 12,978. 13,044. 20,340. 22,508. 23,112. 26,215. 27,526.
P3-EP32 13,183. 13,256. 20,590. 22,770. 23,390. 26,550. 27,877.
P3-EP34 13,211. 13,301. 20,644. 22,861. 23,499. 26,679. 28,013.
P3-EP50 13,575. 13,670. 21,896. 23,385. 24,045. 27,546. 28,924.
P3-EP52 13,779. 13,886. 22,149. 23,656. 24,334. 27,895. 29,290.
P3-EP54 13,812. 13,932. 22,209. 23,758. 24,453. 28,069. 29,473.
P3-EP18 14,531. 14,573. 24,550. 23,961. 24,607. 27,820. 29,211.
P3-EP20 14,560. 14,616. 24,639. 24,049. 24,710. 27,974. 29,373.
P3-EP36 14,588. 14,639. 24,643. 24,259. 24,915. 28,521. 29,947.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut base tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
319
Note:
- Double Plexus AMD and GMD
configurations not available on 42� and
48� deep tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes c-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-CP10-K-K-SE-AM-GM-
GM-AM-WK
P3-CP10 108� x42�rounded rect.
table
K Maple veneer top
K Maple wood edge
SE Saarinen edge detail
AM Medium plexus, left and
right, mid-depth, segment A
GM Medium plexus, center,
mid-depth, segment B
GM Medium plexus, center,
mid-depth, segment C
AM Medium plexus, left and
right, mid-depth, segment D
WK Maple veneer base
(upcharge applies)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Rounded Two, Three and Four Segment Conference Tables with
Peanut Base
description pattern no.
P3-EP Rounded rectangular table, 4
segments, with peanut base
Ordering Information
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
overall
w d h
section
width,
outside
section
width,
inside frame
P3-EP38 312� 48� 28 1 /2� 84� 72� Y 4
P3-EP40 324� 48� 28 1 /2� 90� 72� Y 4
P3-EP56 300� 60� 28 1 /2� 84� 66� Y 4
P3-EP58 312� 60� 28 1 /2� 84� 72� Y 4
P3-EP60 324� 60� 28 1 /2� 90� 72� Y 4
320
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
no. of
bases
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interior:
fabricated sheet metal with black powder
coat finish.
2 bases $2,943
3 bases $4,414
4 bases $5,885

pattern no. veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-EP38 $14,669. $14,731. $24,780. $24,401. $25,074. $28,735. $30,172.
P3-EP40 14,698. 14,776. 24,869. 24,493. 25,185. 28,897. 30,343.
P3-EP56 15,191. 15,273. 26,241. 25,167. 25,879. 29,591. 31,071.
P3-EP58 15,274. 15,368. 26,382. 25,318. 26,049. 29,819. 31,309.
P3-EP60 15,304. 15,415. 26,476. 25,423. 26,168. 29,994. 31,494.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut base tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
321
Note:
- Double Plexus AMD and GMD
configurations not available on 42� and
48� deep tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes c-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini
Order Code
Example: P3-VP10-K-K-AE-GM-AM-
AM-GM-WK
P3-VP10 108� x42�rounded rect.
table
K Maple veneer top
K Maple wood edge
AE Autostrada edge detail
GM Medium plexus, center,
mid-depth, segment A
AM Medium plexus, left and
right, mid-depth, segment B
AM Medium plexus, left and
right, mid-depth, segment C
GM Medium plexus, center,
mid-depth, segment D
WK Maple veneer base
(upcharge applies)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Two, Three and Four Segment Conference Tables
with Peanut Base
description pattern no. w d h
P3-SP Rectangular table, 2 segments, with
peanut base
P3-TP Rectangular table, 3 segments, with
peanut base
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
section
width,
outside
section
width,
inside frame
P3-SP10 108� 42� 28 1 /2� 54� Y 2
P3-SP12 120� 42� 28 1 /2� 60� Y 2
P3-SP14 132� 42� 28 1 /2� 66� Y 2
P3-SP16 144� 42� 28 1 /2� 72� Y 2
P3-SP30 108� 48� 28 1 /2� 54� Y 2
P3-SP32 120� 48� 28 1 /2� 60� Y 2
P3-SP34 132� 48� 28 1 /2� 66� Y 2
P3-SP36 144� 48� 28 1 /2� 72� Y 2
P3-SP50 108� 60� 28 1 /2� 54� Y 2
P3-SP52 120� 60� 28 1 /2� 60� Y 2
P3-SP54 132� 60� 28 1 /2� 66� Y 2
P3-SP56 144� 60� 28 1 /2� 72� Y 2
P3-TP10 156� 42� 28 1 /2� 54� 48� Y 2
P3-TP12 168� 42� 28 1 /2� 60� 48� Y 2
P3-TP30 156� 48� 28 1 /2� 54� 48� Y 2
P3-TP32 168� 48� 28 1 /2� 60� 48� Y 2
P3-TP50 156� 60� 28 1 /2� 54� 48� Y 2
P3-TP52 168� 60� 28 1 /2� 60� 48� Y 2
P3-TP14 180� 42� 28 1 /2� 60� 60� Y 3
P3-TP16 192� 42� 28 1 /2� 66� 60� Y 3
P3-TP18 204� 42� 28 1 /2� 72� 60� Y 3
P3-TP20 216� 42� 28 1 /2� 72� 72� Y 3
P3-TP34 180� 48� 28 1 /2� 60� 60� Y 3
P3-TP36 192� 48� 28 1 /2� 66� 60� Y 3
P3-TP38 204� 48� 28 1 /2� 72� 60� Y 3
P3-TP40 216� 48� 28 1 /2� 72� 72� Y 3
P3-TP54 180� 60� 28 1 /2� 60� 60� Y 3
P3-TP56 192� 60� 28 1 /2� 66� 60� Y 3
P3-TP58 204� 60� 28 1 /2� 72� 60� Y 3
P3-TP60 216� 60� 28 1 /2� 72� 72� Y 3
322
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
no. of
bases
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interiorfabricated
sheet metal with black powder
coat finish.
2 bases $2,943
3 bases $4,414

pattern no veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-SP10 $5,863. $5,985. $8,864. $9,408. $10,069. $11,501. $12,077.
P3-SP12 5,934. 6,074. 8,918. 9,431. 10,112. 11,575. 12,154.
P3-SP14 6,224. 6,372. 9,722. 9,899. 10,615. 12,125. 12,731.
P3-SP16 6,353. 6,536. 10,013. 10,185. 10,955. 12,547. 13,174.
P3-SP30 5,870. 5,997. 8,900. 9,754. 10,450. 11,916. 12,513.
P3-SP32 5,940. 6,086. 8,955. 9,780. 10,496. 11,991. 12,590.
P3-SP34 6,229. 6,386. 9,759. 10,251. 11,002. 12,542. 13,169.
P3-SP36 6,272. 6,445. 9,814. 10,278. 11,047. 12,616. 13,247.
P3-SP50 6,167. 6,319. 9,582. 10,244. 10,994. 12,566. 13,194.
P3-SP52 6,508. 6,689. 10,297. 10,543. 11,334. 12,948. 13,595.
P3-SP54 6,766. 6,953. 10,553. 10,814. 11,625. 13,230. 13,891.
P3-SP56 6,817. 7,023. 10,643. 10,878. 11,710. 13,356. 14,024.
P3-TP10 7,338. 7,547. 11,872. 12,780. 13,751. 15,892. 16,687.
P3-TP12 7,493. 7,719. 12,009. 12,889. 13,878. 16,053. 16,855.
P3-TP30 7,415. 7,637. 12,067. 13,312. 14,331. 16,528. 17,354.
P3-TP32 7,575. 7,813. 12,211. 13,431. 14,470. 16,701. 17,536.
P3-TP50 7,910. 8,166. 13,193. 14,172. 15,279. 17,653. 18,535.
P3-TP52 8,352. 8,634. 14,024. 14,583. 15,731. 18,153. 19,060.
P3-TP14 9,224. 9,404. 13,697. 14,477. 15,485. 17,715. 18,600.
P3-TP16 9,399. 9,593. 14,396. 14,838. 15,879. 18,151. 19,058.
P3-TP18 9,442. 9,652. 14,440. 14,878. 15,937. 18,237. 19,150.
P3-TP20 9,684. 9,906. 14,937. 15,208. 16,297. 18,633. 19,564.
P3-TP34 9,242. 9,432. 13,775. 15,030. 16,088. 18,376. 19,295.
P3-TP36 9,423. 9,625. 14,488. 15,401. 16,497. 18,831. 19,773.
P3-TP38 9,467. 9,686. 14,552. 15,438. 16,553. 18,918. 19,863.
P3-TP40 9,712. 9,944. 15,066. 15,771. 16,914. 19,323. 20,289.
P3-TP54 10,164. 10,401. 15,966. 16,346. 17,525. 20,041. 21,043.
P3-TP56 10,313. 10,567. 16,137. 16,526. 17,726. 20,237. 21,249.
P3-TP58 10,375. 10,644. 16,250. 16,613. 17,838. 20,396. 21,416.
P3-TP60 10,602. 10,881. 16,482. 16,842. 18,088. 20,662. 21,695.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
323
Note:
- Double Plexus AMD and GMD
configurations not available on 42� deep
tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes C-clips for wire
management. For tables without a frame,
please see page 342 to specify clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.

Designer(s):
Emanuela Frattini
Order Code
Example: P3-VP10-K-K-AE-GM-AM-
AM-GM-WK
P3-VP10 108� x42�rounded rect.
table
K Maple veneer top
K Maple wood edge
AE Autostrada edge detail
GM Medium plexus, center,
mid-depth, segment A
AM Medium plexus, left and
right, mid-depth, segment B
AM Medium plexus, left and
right, mid-depth, segment C
GM Medium plexus, center,
mid-depth, segment D
WK Maple veneer base
(upcharge applies)
Specify:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Edge profile option (veneer/wood
edge only)
5. Grommet/Plexus cutout option,
segment A
6. Grommet/Plexus cutout option,
segment B
7. Grommet/Plexus cutout option,
segment C
8. Grommet/Plexus cutout option,
segment D
9. Peanut base selection
Emanuela Frattini
Propeller� Conference Table Series
Rectangular Two, Three and Four Segment Conference Tables
with Peanut Base
description pattern no. w d h
P3-VP Rectangular table, 4 segments, with
peanut base
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
section
width,
outside
section
width,
inside frame
P3-VP10 228� 42� 28 1 /2� 60� 54� Y 3
P3-VP12 240� 42� 28 1 /2� 60� 60� Y 3
P3-VP14 252� 42� 28 1 /2� 66� 60� Y 3
P3-VP16 264� 42� 28 1 /2� 66� 66� Y 3
P3-VP18 276� 42� 28 1 /2� 72� 66� Y 3
P3-VP20 288� 42� 28 1 /2� 72� 72� Y 3
P3-VP30 228� 48� 28 1 /2� 60� 54� Y 3
P3-VP32 240� 48� 28 1 /2� 60� 60� Y 3
P3-VP34 252� 48� 28 1 /2� 66� 60� Y 3
P3-VP36 264� 48� 28 1 /2� 66� 66� Y 3
P3-VP38 276� 48� 28 1 /2� 72� 66� Y 3
P3-VP40 288� 48� 28 1 /2� 72� 72� Y 3
P3-VP50 228� 60� 28 1 /2� 60� 54� Y 3
P3-VP52 240� 60� 28 1 /2� 60� 60� Y 3
P3-VP54 252� 60� 28 1 /2� 66� 60� Y 3
P3-VP56 264� 60� 28 1 /2� 66� 66� Y 3
P3-VP58 276� 60� 28 1 /2� 72� 66� Y 3
P3-VP60 288� 60� 28 1 /2� 72� 72� Y 3
324
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Brown Oak (suffix V427)
Burnt Walnut (suffix V313)
Chalk Oak (suffix V421)
Ebonized Walnut (suffix D)
Graphite Oak (suffix V513)
Light Cherry (suffix V315)
Light Oak (suffix V423)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Old English Walnut (V417)
Warm Brown Walnut (suffix J)
Wood edge profiles:
Autostrada edge (suffix AE)
Propeller edge (suffix PE)
Saarinen edge (suffix SE)
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Grommet finishes:
Anodized Aluminum (suffix A)
Beige Mist (suffix 611)
Medium Metallic Grey (suffix 612)
Peanut Base finishes:
Perforated Aluminum (suffix A)
no. of
bases
Veneer Peanut Base finishes: (upcharge
applies)
For veneer peanut base finish, add letter
W to the veneer finish code at the end of
the pattern number (e.g. W-K for maple
peanut base finish) and add appropriate
upcharge as listed below. Interiorfabricated
sheet metal with black powder
coat finish.
2 bases $2,943
3 bases $4,414

Designer(s):
Emanuela Frattini, 1994
Emanuela Frattini
Propeller� Accessories
Privacy and Modesty Screens with Fabric or Perforated Metal
Interior
description pattern no. w d h
P2-SC 11� high screen P2-SC2411-( ) 22 1 /2� 1� 11�
P2-SC3011-( ) 28 1 /2� 1� 11�
P2-SC3611-( ) 34 1 /2� 1� 11�
P2-SC4211-( ) 40 1 /2� 1� 11�
P2-SC4811-( ) 46 1 /2� 1� 11�
P2-SC6011-( ) 58 1 /2� 1� 11�
P2-SC6611-( ) 64 1 /2� 1� 11�
P2-SC7211-( ) 70 1 /2� 1� 11�
P2-SC 13� high screen P2-SC2413-( ) 22 1 /2� 1� 13�
P2-SC3013-( ) 28 1 /2� 1� 13�
P2-SC3613-( ) 34 1 /2� 1� 13�
P2-SC4213-( ) 40 1 /2� 1� 13�
P2-SC4813-( ) 46 1 /2� 1� 13�
P2-SC6013-( ) 58 1 /2� 1� 13�
P2-SC6613-( ) 64 1 /2� 1� 13�
P2-SC7213-( ) 70 1 /2� 1� 13�
P2-SC 18� high screen P2-SC2418-( ) 22 1 /2� 1� 18�
P2-SC3018-( ) 28 1 /2� 1� 18�
P2-SC3618-( ) 34 1 /2� 1� 18�
P2-SC4218-( ) 40 1 /2� 1� 18�
P2-SC4818-( ) 46 1 /2� 1� 18�
P2-SC6018-( ) 58 1 /2� 1� 18�
P2-SC6618-( ) 64 1 /2� 1� 18�
P2-SC7218-( ) 70 1 /2� 1� 18�
58� and 64� fabrics will usually be railroaded, 70� fabric will always be railroaded.
Order Code
Example: P2-SC-6018-A-A2
P2-SC-BKT-PS-A
P2-SC Propeller screen
6018 58 1 /2�wx18�h
A Aluminum frame finish
A2 Thorn fabric
P2-SC-
BKT-PS
2 privacy screen attachment
clamps
A Anodized Aluminum paint
finish
Specify:
1. Pattern number
2. Frame finish
3. Screen fabric selection/suffix -M for
metal screen
4. Attachment bracket (see page 330)
5. Privacy clamp finish (see page 330)
Finishes
Frame, screen and privacy clamp paint
finish options:
Aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
Screen fabric selection:
Grade A:
Black (suffix A4)
Cane (suffix A5)
Granite (suffix A1)
Thorn (suffix A2)
Approved KnollTextiles:
Allegory WC865
Back Drop W302
Bollywood WC1015
Matinee WC272
Odeon K317
Sequel WC866
326
Features
Screens:
Fabric screens are universal for either
modesty or privacy use. Screen heights
are measured from table top to screen
top. 11� high screens are recommended
for modesty application. Note: smaller
screens have to be railroaded as a
special to match wide screens.
Screen Attachment:
Privacy screens attach anywhere along
table edge. They can be full table
width/depth or less. Corresponding
attachment clamps must be ordered
seperately.
Modesty screens attach to leg plates,
have to be sized to match full table width
(less 1 /2�) or depth for rectangular
training tables. For Trapezoid tables,
modesty panels must be attached using
90 degree connectors drilled into the top.
Specify part number (KR1C59648CT).
Two connectors are needed per table.
Frame:
Frame consists of extruded aluminum
horizontals and die-cast vertical
members. Powdercoat finish. Metal
screens should be used for modesty only.
Metal screens are sheet metal with
perforation pattern and fused
powder-coat finish. Metal screens
should be used for privacy only.
Maintenance:
See pages 27-28.

KnollStudio
pattern no. screen fabric metal (add suffix -M)
P2-SC2411-( ) $301. $480.
P2-SC3011-( ) 328. 534.
P2-SC3611-( ) 355. 588.
P2-SC4211-( ) 396. 643.
P2-SC4811-( ) 431. 724.
P2-SC6011-( ) 506. 827.
P2-SC6611-( ) 547. 881.
P2-SC7211-( ) 580. 929.
P2-SC2413-( ) 328. 534.
P2-SC3013-( ) 355. 588.
P2-SC3613-( ) 382. 643.
P2-SC4213-( ) 424. 724.
P2-SC4813-( ) 458. 781.
P2-SC6013-( ) 534. 881.
P2-SC6613-( ) 575. 937.
P2-SC7213-( ) 609. 983.
P2-SC2418-( ) 355. 588.
P2-SC3018-( ) 382. 643.
P2-SC3618-( ) 412. 698.
P2-SC4218-( ) 452. 781.
P2-SC4818-( ) 486. 833.
P2-SC6018-( ) 560. 937.
P2-SC6618-( ) 600. 992.
P2-SC7218-( ) 634. 1,039.
327

Designer(s):
Emanuela Frattini, 1999
Order Code
Example: P2-SCT6018A-WC296/17
P2-SC-BKT-PS-A
P2-SCT Propeller tackable screen
6018 60�wx18�h
A Aluminum frame
WC296/17 Bauhaus Block, Evergreen
P2-SC-BKT Screen attachment bracket
PS Single bracket
A Aluminum finish
Specify:
1. Pattern number
2. Frame finish
3. Panel fabric selection
4. Attachment clamp (see page 330)
5. Attachment clamp finish (see page
330)
Emanuela Frattini
Propeller� Accessories
Tackable Fabric Privacy Screens
description pattern no. w d h
P2-SCT Propeller tackable fabric privacy
screen for training tables, 11� above table
top
P2-SCT Propeller tackable fabric privacy
screen for training tables, 13� above table
top
P2-SCT Propeller tackable fabric privacy
screen for training tables, 18� above table
top
Finishes
Frame/clamp finish:
Aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
P2SCT2411-( ) 22 1 /2� 1� 11�
P2SCT3011-( ) 28 1 /2� 1� 11�
P2SCT3611-( ) 34 1 /2� 1� 11�
P2SCT4211-( ) 40 1 /2� 1� 11�
P2SCT4811-( ) 46 1 /2� 1� 11�
P2SCT6011-( ) 58 1 /2� 1� 11�
P2SCT6611-( ) 64 1 /2� 1� 11�
P2SCT7211-( ) 70 1 /2� 1� 11�
P2SCT2413-( ) 22 1 /2� 1� 13�
P2SCT3013-( ) 28 1 /2� 1� 13�
P2SCT3613-( ) 34 1 /2� 1� 13�
P2SCT4213-( ) 40 1 /2� 1� 13�
P2SCT4813-( ) 46 1 /2� 1� 13�
P2SCT6013-( ) 58 1 /2� 1� 13�
P2SCT6613-( ) 64 1 /2� 1� 13�
P2SCT7213-( ) 70 1 /2� 1� 13�
P2SCT2418-( ) 22 1 /2� 1� 18�
P2SCT3018-( ) 28 1 /2� 1� 18�
P2SCT3618-( ) 34 1 /2� 1� 18�
P2SCT4218-( ) 40 1 /2� 1� 18�
P2SCT4818-( ) 46 1 /2� 1� 18�
P2SCT6018-( ) 58 1 /2� 1� 18�
P2SCT6618-( ) 64 1 /2� 1� 18�
P2SCT7218-( ) 70 1 /2� 1� 18�
328
Features
Screens:
Propeller tackable screens are
upholstered on front and back.
Screens 60� and wider will also be
railroaded. Smaller screens have to be
railroaded as a special to match wide
screens.
Tackable screens can be specified for
privacy application only. Screen heights
are measured from table top to screen
top. Privacy screens can be attached
anywhere along table edge. They can be
full table width/depth or less.
Corresponding attachment clamps must
be ordered seperately.
58� and 64� fabrics will usually be
railroaded, 70� fabric will always be
railroaded
Construction
Frame:
Extruded aluminum horizontal and
die-cast vertical members. Powder-coat
finish.
Screen:
1/2� thick mineral board for durable,
highly tackable surface. Upholstered on
both sides.
Maintenance:
See pages 27-28.

pattern no. brackets
COM
10 20 30 40 45 50 55 60
P2SCT2411-( ) $400. $403. $444. $448. $452. $484. $496. $505.
P2SCT3011-( ) 450. 454. 490. 494. 498. 547. 564. 577.
P2SCT3611-( ) 509. 514. 557. 564. 575. 609. 629. 643.
P2SCT4211-( ) 543. 548. 598. 606. 616. 667. 694. 707.
P2SCT4811-( ) 585. 589. 641. 646. 657. 720. 748. 765.
P2SCT6011-( ) 721. 725. 790. 795. 808. 900. 934. 955.
P2SCT6611-( ) 841. 861. 950. 971. 1,000. 1,011. 1,053. 1,081.
P2SCT7211-( ) 903. 922. 1,019. 1,039. 1,066. 1,081. 1,120. 1,147.
P2SCT2413-( ) 417. 421. 461. 464. 468. 496. 510. 518.
P2SCT3013-( ) 464. 467. 509. 513. 518. 560. 578. 590.
P2SCT3613-( ) 526. 535. 579. 588. 598. 622. 643. 657.
P2SCT4213-( ) 575. 582. 633. 643. 654. 696. 720. 736.
P2SCT4813-( ) 616. 624. 681. 689. 701. 753. 782. 797.
P2SCT6013-( ) 752. 760. 826. 833. 845. 927. 960. 982.
P2SCT6613-( ) 861. 881. 971. 992. 1,019. 1,032. 1,074. 1,100.
P2SCT7213-( ) 929. 950. 1,032. 1,053. 1,081. 1,093. 1,135. 1,163.
P2SCT2418-( ) 443. 446. 487. 491. 498. 517. 531. 539.
P2SCT3018-( ) 517. 520. 561. 568. 575. 609. 627. 640.
P2SCT3618-( ) 609. 619. 667. 677. 689. 698. 718. 730.
P2SCT4218-( ) 649. 660. 722. 730. 745. 769. 793. 811.
P2SCT4818-( ) 689. 701. 769. 781. 792. 829. 856. 876.
P2SCT6018-( ) 861. 874. 953. 965. 977. 1,043. 1,077. 1,099.
P2SCT6618-( ) 983. 1,005. 1,107. 1,128. 1,156. 1,168. 1,210. 1,238.
P2SCT7218-( ) 1,066. 1,087. 1,198. 1,216. 1,245. 1,256. 1,299. 1,328.
Fabrics Approved for Upholstery on Propeller Tackable Screens
Grade 10:
COM
Bailey II
Broadcloth
Element
Foundation
Growth Spurt
Newbury
Solid Crepe
Symbolic Details
Tailor Made
Taurus
Versatility
Grade 20:
Banyan
Bauhaus
Block
Boardwalk
Circle Line
Clarity
Criss Cross
Grade 20 con’t
Devon
Frequency
Labyrinth
Litchfield
Melbourne
Outback
Playa
Reflect
Resolution
Walkabout
Weave Three
Grade 30:
Basket Draft
Crescent
Elan
Flow
Freehand
Harmony
Interknit
Matchpoint
Micro
Grade 30 con’t:
Peano
Progression
Promenade
Raku Cloth
Relay
Walls of Rain
Grade 40:
Bardo
Boxstep
Chimes
Eurythmic
Foil Rap
Freefall
Hard Rock
Heavy Metal
Ornament
Palladium
Sennit
Sierra
Spinoff Nuance
Grade 45:
Backdrop
Casual Elegance
Digital Tape
Dristi
Fast Forward
Macro
Mezzo
Grade 50:
Balance
Bank Shot
Breakers
329
Grad 50 con’t:
Glo
Ingot
Knoll Hopsack
Presto
Ricochet
Tokay II
Grade 55:
Knoll Felt
Transition
Grade 60:
Aero
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-SC-6018-A-A2
P2-SC-BKT-PS-A
P2-SC Propeller screen
6018 58 1 /2�wx18�h
A Aluminum frame finish
A2 Thorn fabric
P2-SC-
BKT-PS
2 privacy screen attachment
clamps
A Anodized Aluminum paint
finish
Specify:
1. Pattern number
2. Frame finish
3. Screen fabric selection/suffix -M for
metal screen (see page 326)
4. Attachment bracket
5. Privacy clamp finish
Emanuela Frattini
Propeller� Accessories
Attachment Clamps for Modesty and Privacy Screens
description pattern no.
P2-SC-BKT-MP Set of two modesty screen
attachment clips
P2-SC-BKT-PS Set of two privacy screen
attachment clamps, single
P2-SC-BKT-PSD Set of two privacy screen
attachment clamps, shared
P2-SC-BKT-PSE One privacy screen
attachment clamp, end
P2-SC-BKT-PST One privacy screen
attachment clamp, T-end
Finishes
Frame, screen and privacy clamp paint
finish options:
Aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
P2-SC-BKT-MP-( )
P2-SC-BKT-PS-( )
P2-SC-BKT-PSD-( )
P2-SC-BKT-PSE-( )
P2-SC-BKT-PST-( )
330
Features
Privacy screen attachment clamps:
Clamps are die-cast aluminum with a
fused powder-coat finish. One set (two
clamps) required for attachment of each
screen. Specify single attachment
clamps. Clamps can be attached at any
location on table edge by simple screw
fit.
Screens install without the use of any
tools and are held in place with a simple
friction fit.
Privacy screen attachment clamps for
shared configuration:
One set (2 clamps) required for each
screen. Specify shared attachment
clamps. Brackets attach on two tables, in
a back-to-back or side-to-side
configuration at any location on width or
depth side of table. There will be a 3 /4�
gap between connected tables below the
shared screen.
Modesty screen attachment clips:
Clips are injection molded medium grey
nylon. Two clips required for each
screen. Clips are inserted in top of leg
endplate.

pattern no. brackets
P2-SC-BKT-MP-( ) $31.
P2-SC-BKT-PS-( ) 86.
P2-SC-BKT-PSD-( ) 113.
P2-SC-BKT-PSE-( ) 73.
P2-SC-BKT-PST-( ) 100.
Mid-depth privacy screen attachment:
Use two end clamps to attach mid-depth
screens anywhere along the table top.
When using a mid-depth screen with a
standard privacy screen, use one T-end
clamp where the two screens meet and
one end clamp at the free end.
Maintenance:
See pages 27-28.
331
KnollStudio

Designer(s):
Emanuela Frattini
Order Code
Example: P2FT4811-A-W534/4
P2-FT-BKT-MP-A
P2FT Propeller Flip-Top modesty
screen
4811 31�wx11�h
A Aluminum frame
W534/4 Foil Wrap, Silver
P2-FT-BKT- Modesty screen attachment
MP bracket
A Aluminum finish
Specify:
1. Pattern number
2. Frame finish
3. Panel fabric selection
4. Attachment clamp
5. Attachment clamp finish
Emanuela Frattini
Propeller� Accessories
Tackable Modesty Screens for Flip-Top Tables
description pattern no. w d h
P2-FT Propeller tackable fabric modesty
screen for Flip-Top tables, 11�
P2-FT Propeller tackable fabric modesty
screen for Flip-Top tables, 13�
P2-FT Propeller tackable fabric modesty
screen for Flip-Top tables, 18�
P2-FT-BKT-MP Set of two modesty panel
attachment clips for Flip-Top table
Finishes
Frame/Clamp finish:
Aluminum (suffix A)
Medium Metallic Grey (suffix 612)
Beige Mist (suffix 611)
P2FT4811-( ) 31� 7 /8� 11�
P2FT6011-( ) 43�
7
/8� 11�
P2FT7211-( ) 55�
7
/8� 11�
P2FT4813-( ) 31�
P2FT6013-( ) 43�
P2FT7213-( ) 55�
P2FT4818-( ) 31�
P2FT6018-( ) 43�
P2FT7218-( ) 55�
P2-FT-BKT-MP( )
332
Features
Screens:
Modesty screens for Flip-top tables are
available in mesh screen fabric and
select KnollTextiles. Available in three
standard heights and widths. Screens
are non-sided and non-directional.
7
/8� 13�
7
/8� 13�
7
/8� 13�
7
/8� 18�
7
/8� 18�
7
/8� 18�
Modesty screen attachment clips:
Two P2-FT-BKT-MP clips required for
each screen. Clips are screw fixed to the
Flip-top leg. Please reference the
Propeller Manual for drawings.
Modesty screens for the Flip-top tables
differ in size to standard modesty/privacy
screens.

pattern no. brackets screen fabric
P2FT4811-( ) $431.
P2FT6011-( ) 506.
P2FT7211-( ) 580.
P2FT4813-( ) 458.
P2FT6013-( ) 534.
P2FT7213-( ) 609.
P2FT4818-( ) 486.
P2FT6018-( ) 560.
P2FT7218-( ) 634.
P2-FT-BKT-MP( ) 98.
Construction
Frame:
Extruded aluminum horizontal and
die-cast vertical members. Powder coat
finish.
Fabrics Approved for Upholstery on Flip-Top Modesty Screens
Mesh screen fabric:
Black (suffix A4)
Cane (suffix A5)
Granite (suffix A1)
Thorn (suffix A2)
Approved KnollTextiles:
Allegory WC865
Back Drop W302
Bollywood WC1015
Matinee WC272
Odeon K317
Sequel WC866
333
KnollStudio

Designer(s):
Emanuela Frattini, 2000
Order Code
Example: (2) P2-SH60-A
(3) P2-SHSD-A
P2-SH60 Propeller 60�-wide shelf,
two for back-to-back
configuration
A Aluminum finish
PS-SHSD Stanchion for back-to-back
configuration, three for
60�-wide shelf
A Aluminum finish
Specify:
1. Shelf Pattern number (double
quantity for back-to-back shelves)
2. Shelf finish
3. Stanchion type and required quantity
per shelf
4. Stanchion finish
5. Load bar
6. Load bar finish
Emanuela Frattini
Propeller� Accessories
Shelves and Stanchions with Load Bars
description pattern no. w d h
P2-SH Shelf for Propeller training table P2-SH24-( ) 24� 10 3 /4� 18� 2
P2-SH30-( ) 30� 10 3 /4� 18� 2
P2-SH36-( ) 36� 10 3 /4� 18� 2
P2-SH42-( ) 42� 10 3 /4� 18� 2
P2-SH48-( ) 48� 10 3 /4� 18� 3
P2-SH60-( ) 60� 10 3 /4� 18� 3
P2-SH66-( ) 66� 10 3 /4� 18� 3
P2-SH72-( ) 72� 10 3 /4� 18� 4
P2-SHS Stanchion for single table with
optional load bar bracket, per piece
P2-SHSD Stanchion for back-to-back tables
with optional load bar bracket, per piece
P2-SHLB Orchestra load bar for stanchion,
width to fit shelf width
Finishes
Shelf/stanchion/load bar finish:
Aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
P2-SHS-( )
P2-SHSD-( )
P2-SHLB24-( ) 24� 1 /2� 3�
P2-SHLB30-( ) 30� 1 /2� 3�
P2-SHLB36-( ) 36�
1
/2� 3�
P2-SHLB42-( ) 42�
1
/2� 3�
P2-SHLB48-( ) 48� 1 /2� 3�
P2-SHLB60-( ) 60� 1 /2� 3�
P2-SHLB66-( ) 66� 1 /2� 3�
P2-SHLB72-( ) 72� 1 /2� 3�
334
Features
Shelves:
Propeller shelves can be attached to any
Propeller table in the same width as table
or less. Shelf can be single or double in
back-to-back configurations. Shelves are
18� high when attached to stanchion and
align with 18� screens. Clearance below
shelf is 9 1 /4�. Height of shelf alone is
8 3 /4�.
Stanchions:
Number of stanchions required depends
on shelf width (see right column on left
page). Stanchion attaches by simply
screw-clamping onto table top from
bottom. Stanchion can be single or for
back-to-back configurations so shelves
can be hung from both sides. 3 /4� gap
between tables. Pre-drilled holes allow
for attachment of optional load bars.
no. of
stanchions
required
Load bar:
Standard KnollExtra load bar for
Orchestra accessories in three finishes.
Specify same width as shelf.

pattern no. list price
P2-SH24-( ) $445.
P2-SH30-( ) 485.
P2-SH36-( ) 523.
P2-SH42-( ) 589.
P2-SH48-( ) 628.
P2-SH60-( ) 786.
P2-SH66-( ) 863.
P2-SH72-( ) 903.
P2-SHS-( ) 196.
P2-SHSD-( ) 245.
P2-SHLB24-( ) 87.
P2-SHLB30-( ) 87.
P2-SHLB36-( ) 92.
P2-SHLB42-( ) 105.
P2-SHLB48-( ) 115.
P2-SHLB60-( ) 133.
P2-SHLB66-( ) 148.
P2-SHLB72-( ) 172.
Construction
Shelf:
Perforated sheet metal with rolled front
edges in powder-coat finish. Steel wire
supports in chrome finish.
Stanchion:
Die-cast aluminum bracket with
powder-coat finish. Steel vertical bar for
attachment of shelf.
Load bar:
Extruded aluminum in satin anodized or
powder-coat finish. Textured polystyrene
end caps. Load bar is filled with 1 /2�
Delvin plastic pellets to support papers
on info rail.
Maintenance:
See pages 27-28.
335
KnollStudio

Designer(s):
Emanuela Frattini, 1996
Order Code
Example: P4-TR1-SL-R6-G-A
P4-TR1 Small rolling cart
SL Slate laminate
R6 Black 3mm edgeband
BG Grommet option
A Anodized Aluminum
grommet, shelf and leg
finish
Specify rolling cart:
1. Pattern number
2. Top finish selection
3. Edgeband selection
4. Grommet option
5. Leg/grommet/shelf finish
Specify easel:
1. Pattern number
Emanuela Frattini
Propeller� Accessories
Rolling Cart and Easel
description pattern no. w d h
P4-TR Rolling cart P4-TR1 36� 20� 27�
P4-TR2 44� 24� 28 1 /2�
P4-EASEL-P With porcelain enamel
erasable writing board
Two load bars for P4-TR-2 P4-TR2-LB2 17�
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
P4-EASEL-P 30� 27� 76�
336
Veneer top/edge and leg finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Burnt Walnut (suffix V313)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
Molded and PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
Spring Green (suffix 1) *
For urethane edge only
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Leg, shelf and grommet finishes:
Anodized Aluminum (suffix A)
Medium Metallic Grey (suffix 612)
Beige Mist (suffix 611)

pattern no. accessories
laminate/
3mm edge
laminate/
molded edgeband
veneer/
3mm edge veneer/ PVC
P4-TR1 $1,277. $1,435. $2,655. $2,920.
P4-TR2 1,400. 1,573. 2,953. 3,293.
P4-EASEL-P 1,299.
P4-TR2-LB2 165.
Electrical
Grommet options:
No grommet (suffix Y)
Mid-depth grommet, right side (suffix
BG)
Features
Rolling cart:
Versatile Propeller rolling cart can be
used to serve food, support presentation
equipment or as an individual computer
workstation. Small cart fits underneath
standard height training tables for
temporary storage.
Attach a KnollExtra keyboard drawer to
underside of top to create a small,
independent computer workstation.
Narrow keyboard drawer fits underneath
P4-TR1 and P4-TR2, wide keyboard
drawer underneath P4-TR2 only. See
KnollExtra price list for more
information.
Available in all Propeller
laminate/techgrain finishes with molded
urethane edge and in all wood veneer
finishes with PVC-T edge.
Optional grommet is located 2 1 /8� from
rolling cart edge and has 3 1 /4� diameter.
Same finish as legs.
337
Rolling Cart Construction:
1 1 /4� thick; solid, 3-ply, medium density
fiberboard core with laminate/Techgrain
top and molded urethane edge or wood
top with PVC-T edge. Legs are extruded
aluminum with clear satin anodized or
powder-coat finish. 18 gauge perforated
steel metal shelf with rolled edges is
attached to legs with round steel rod at
7 1 /2� height off floor. Leg end mounting
plate is medium grey powder-coated
metal. Leg end caps are black injection
molded nylon. Rolling cart has two 2 3 /8�
locking casters and two non-locking
casters. Load bars are black painted
steel.
KnollStudio
Easel:
Holds standard sized flip charts.
Erasable magnetic enamel writing board
(ships with 8 magnets). Available in
anodized aluminum frame finish only.
Easel folds for storage.
Easel construction:
Clear satin anodized aluminum extrusion
frame, front legs and marker trough.
Medium grey painted steel folding bail.
Front legs have rounded black
thermoplastic rubber end caps for
stability. White porcelain enamel
magnetic writing board. Steel cable
folding mechanism.
Maintenance:
See pages 27-28.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P5-2-9-V-A
P5 Propeller credenza
2 Six positions
9 Double box/file, double
door,
Double box/file
B Natural Beech veneer
A Aluminum legs and pulls
Example: P5-1-2-LJ-4-A
P5 Propeller credenza
1 Four positions
2 Four box/file
LJ Brushed Aluminum
laminate top
4 Light Grey edge
A Aluminum pedestal, pulls
and legs
Specify:
1. Pattern number
2. Top finish (pedestal finish for veneer
tops)
3. Edge band selection (sideboard and
laminate credenzas)
4. Leg/pull/shelf finish (pedestal for
laminate top credenzas
* Please note, AE/SE optional edge
option adds 3� to the overall depth of
each piece; AE1/SE1 optional edge
option adds 1 1 /2� to the overall depth
of each piece.
Emanuela Frattini
Propeller� Accessories
Credenzas and Sideboards
description pattern no. w d* h
P5-0 Two position credenza P5-01 36 1 /4� 20� 28 1 /2�
P5-02 36 1 /4� 20� 28 1 /2�
P5-1 Four position credenza P5-11 67 3 /8� 20� 28 1 /2�
P5-12 67 3 /8� 20� 28 1 /2�
P5-13 67 3 /8� 20� 28 1 /2�
P5-14 67 3 /8� 20� 28 1 /2�
P5-15 67 3 /8� 20� 28 1 /2�
P5-2 Six position credenza P5-21 98 1 /2� 20� 28 1 /2�
P5-22 98 1 /2� 20� 28 1 /2�
P5-23 98 1 /2� 20� 28 1 /2�
P5-24 98 1 /2� 20� 28 1 /2�
P5-25 98 1 /2� 20� 28 1 /2�
P5-26 98 1 /2� 20� 28 1 /2�
P5-27 98 1 /2� 20� 28 1 /2�
P5-28 98 1 /2� 20� 28 1 /2�
P5-29 98 1 /2� 20� 28 1 /2�
P5-C Small sideboard P5-C 67 3 /8� 20� 28 1 /2�
P5-D Large sideboard P5-D 98 1 /2� 20� 28 1 /2�
Finishes
Colored laminate top finishes:
Bright White (suffix 118)
Brushed Aluminum (suffix LJ)
Brushed Sand (suffix 122)
Craft Paper (suffix LP)
Fog (suffix 128)
Folkstone Grey (suffix 114)
Jet Black (suffix 111)
Light Grey (suffix L)
Micro Grey (suffix 121)
Micro Sand (suffix 129)
Pumice (suffix 119)
Slate (suffix SL)
Soft Grey (suffix 117)
Wood grain laminate finishes:
Deep Cherry (suffix DC)
Medium Cherry (suffix 124)
Natural Cherry (suffix 126)
Natural Maple (suffix 125)
Pearwood (suffix PA)
Walnut (suffix 127)
Veneer top/edge finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Burnt Walnut (suffix V313)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
338
PVC edgeband finishes:
Black (suffix 6)
Light Grey (suffix 4)
Medium Grey (suffix 5)
3mm flat edgeband finish:
Opaque:
Black (suffix R5)
Bright White (suffix 118)
Medium Grey (suffix R6)
Translucent:
Frosty White (suffix JW)
Limette (suffix JL)
Silver Grey (suffix JS)
Wood edge profiles:
Autostrada edge, both sides (suffix AE)
Autostrada edge, front (suffix AE1)
Propeller edge (suffix PE)
Saarinen edge, both sides (suffix SE)
Saarinen edge, front (suffix SE1)
Leg, shelf and grommet finishes:
Anodized Aluminum (suffix A)
Medium Metallic Grey (suffix 612)
Beige Mist (suffix 611)
Leg, pull, shelf and pedestal finishes on
painted credenzas:
Aluminum (suffix A) *
Medium Metallic Grey (suffix 6112)
Beige Mist (suffix 611)
Features
Credenza:
Peanut-shaped leg of Propeller credenza
does not include wire channels.
Wood credenzas:
Pedestals on wood credenzas are
pre-configured with matching veneer run
along credenza front.
Credenzas with laminate top:
Pedestals on laminate top credenzas are
painted to match leg and pull finish. All
credenzas are fully lockable. One key for
all locks. Pull finish matches leg finish.
Credenzas have six legs, four side legs
and two short center legs.

pattern no.
top/edge/pedestal
laminate/3mm/
painted case
top/edge/pedestal
laminate/PVC/
painted case
top/edge/pedestal
laminate/wood/
painted case
top/edge/pedestal
veneer/3mm/
veneer case
top/edge/pedestal
veneer/PE wood/
veneer case
top/edge/pedestal
veneer/
AE/SE wood/
veneer case
top/edge/pedestal
veneer/
AE1/SE1 wood/
veneer case
P5-01 $4,524. $5,103. $5,632. $6,099. $7,019. $7,053. $7,053.
P5-02 4,252. 4,839. 5,358. 5,852. 6,733. 6,765. 6,765.
P5-11 7,644. 8,474. 9,402. 10,027. 10,778. 10,830. 10,830.
P5-12 7,917. 8,474. 9,402. 10,277. 10,778. 10,830. 10,830.
P5-13 7,644. 8,066. 8,970. 10,027. 10,478. 10,528. 10,528.
P5-14 7,644. 8,066. 8,970. 10,027. 10,478. 10,528. 10,528.
P5-15 7,372. 7,656. 8,541. 9,781. 10,179. 10,228. 10,228.
P5-21 10,309. 11,347. 12,631. 13,822. 14,671. 14,741. 14,741.
P5-22 10,855. 11,755. 13,061. 14,318. 14,969. 15,040. 15,040.
P5-23 10,309. 10,935. 12,199. 13,822. 14,370. 14,439. 14,439.
P5-24 10,309. 10,935. 12,199. 13,822. 14,370. 14,439. 14,439.
P5-25 10,037. 10,527. 12,489. 13,575. 14,070. 14,137. 14,137.
P5-26 10,309. 10,935. 12,199. 13,822. 14,370. 14,439. 14,439.
P5-27 10,628. 11,347. 12,631. 14,116. 14,671. 14,741. 14,741.
P5-28 10,628. 11,347. 12,631. 14,116. 14,671. 14,741. 14,741.
P5-29 10,628. 11,347. 12,631. 14,116. 14,671. 14,741. 14,741.
P5-C 3,041. 3,419. 4,091. 3,458. 4,941. 4,964. 4,964.
P5-D 4,046. 4,580. 5,527. 4,593. 6,712. 6,744. 6,744.
Credenza Construction:
Pedestals of wood credenzas are 3-ply
solid medium density fiberboard core
with veneer surface on front, back and
sides. Pedestals of laminate top
credenzas have textured powder-coat
paint surface on front, back and sides.
Pedestals have double module
construction (double door, single door
left or right with single box/file drawer,
double box/file drawer). Layout is
preconfigured as shown to right.
Credenzas have beam frame
construction. Pedestal modules glide
onto frame and are numbered in
sequence for veneer run.
Double door pedestal has one adjustable
shelf. Inside dimensions are 29�w,
17 1 /4�d, 19�h. A door hinges open from
left. B door hinges open from right.
P5-11 and P5-21 have single box/file
drawer units. Box/file drawer unit: file
drawer suitable for letter and legal filing;
full extension drawers. Insides of drawers
are lined with black vinyl.
Credenza Construction con’t.
Extruded aluminum legs with anodized
aluminum or powder-coat finish (medium
metallic grey, dark metallic grey). Black
plastic leveling glides. Pulls are die-cast
aluminum with powder-coat finish. Beam
supports are powder-coated metal,
positioned to be invisible in frontal view.
Sideboard:
Peanut-shaped leg of Propeller side
boards does not include wire channels.
Sideboards ship with perforated metal
shelf that attaches to legs at 7 3 /4� under
side board top. Shelf finish matches leg
finish. Small side-board has four legs,
large sideboard has six legs (four side
legs and two center legs).
Sideboard Construction:
1 1 /8� thick 3-ply solid medium density
fiberboard core with urethane edge on
laminate tops, PVC or solid wood edge
on wood tops. Black plastic glides.
Extruded aluminum legs with anodized
or powder-coated finish.
18-gauge perforated metal shelf with 4
rolled edges, attached to leg with steel
rod. Fused powder-coat finish.
339
Credenza/sideboard leg profile:
Credenza pull detail:
Shipping:
Credenzas and sideboards shipped
knocked down. Field assembly required.
Sideboards ship tops, shelf and legs
separately. Credenzas ship top, pedestal
modules (two for four position credenza,
three for six position credenza), legs and
beam support separately. Pedestals are
marked for veneer run.
Maintenance:
See pages 27-28.
Credenza configurations:
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P2-RLEG2KIT-G-A
P2- 2 replacement legs, training
RLEGKIT table, aluminum leg
G Glides
A Anodized Aluminum finish
Example: P3-CLEG-C-P611
P3-CLEG-C Replacement leg,
conference table, aluminum
leg
611 Beige Mist finish
Emanuela Frattini
Propeller� Accessories
Replacement Parts, Training and Conference Tables
description pattern no. type w d h
P2-TLEG Replacement leg kit, trapezoid
tables
P2-RLEG Replacement leg kit for
rectangular table, aluminum leg
P2-TLEG2-( )-( ) Set of 2 3 3 /4� 1 5 /8� 27 1 /4�
P2-TLEG4-( )-( ) Set of 4 3 3 /4� 1 5 /8� 27 1 /4�
P2-RLEG2KIT-( )-
()
P2-RLEG4KIT-( )-
()
Set of 2 3 3 /4� 1 5 /8� 27 1 /4�
Set of 4
P2-TCLEG2 Replacement C-Leg kit P2-TCLEG218-( ) Set of 2, 18�
table
P2-TCLEG2-( ) Set of 2, 24�
and 30� tables
P2-TTLEG Replacement T-Leg kit P2-TTLEG30-( ) Set of 2, 30�
tables
P2-TTLEG2-( ) Set of 2, 36�
tables
P3-CLEG Single conference table leg P3-CLEG-C-( ) caster 2 1 /4� 27 1 /2�
P3-CLEG-F-( ) glide 2 1 /4� 27 1 /2�
P2-CASTER4 Replacement casters,
aluminum training leg
P2-GLIDE4 Aluminum leg replacement
glides
P3-KNOB8 Tool-free hand screws for
conference table leg
P2-C-2 Replacement connector bars P2-C-2 Set of 2,
temporary
connection
P4-RW-C2 Replacement connectors P4-RW-C2 Set of 2,
permanent
connection
Finishes
Specify:
1. Caster or glide option (Training table
legs only)
2. Leg finish
P2-CASTER4 Set of 4 2� 1 1 /2� 1 3 /4�
P2-GLIDE4 Set of 4 1 1 /2� 1 1 /2� 1 1 /2�
P3-KNOB8 8 for 2 legs
340
Grommet and Leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
Glides/Casters:
Glides (suffix G)
Locking Casters (suffix C)
4 3 /8�
3 /4�
3 /4�
Features
Legs are for replacement of standard
conference and training legs. For
hardwired applications specify empty
plexus boxes and empty legs. See page
366 or Propeller manual for more
information.
For pre-wired applications, specify with
pre-wired plexus boxes and pre-wired
legs. See page 364 or the Propeller
manual for more information.

pattern no. list
P2-TLEG2-( )-( ) $654.
P2-TLEG4-( )-( ) 1,144.
P2-RLEG2KIT-( )-( ) 654.
P2-RLEG4KIT-( )-( ) 1,144.
P2-TCLEG218-( ) 1,564.
P2-TCLEG2-( ) 1,564.
P2-TTLEG30-( ) 1,564.
P2-TTLEG2-( ) 1,564.
P3-CLEG-C-( ) 342.
P3-CLEG-F-( ) 342.
P2-CASTER4 34.
P2-GLIDE4 34.
P3-KNOB8 170.
P2-C-2 39.
P4-RW-C2 40.
Maintenance:
See pages 27-28.
341
KnollStudio

Designer(s):
Emanuela Frattini, 2004
Order Code
Example: P3-DBASES-W(X)
P3- Small drum base only
DBASES
W Veneer Option
X American Cherry Finish
Specify:
1. Drum or Peanut base size
2. Veneer or Perforated Aluminum
Option
3. Veneer Finish
Emanuela Frattini
Propeller� Accessories
Replacement Parts, Peanut and Drum Base Conference Tables
description pattern no.
base
finish
panel
width
footplate
width d h weight
P3-DBASES Small Drum Base Only P3-DBASES-(A) Perforated
Aluminum
18� 25� 28 1 /2� 83
P3-DBASES-W( ) Veneer 18� 25� 28 1 /2� 83
P3-DBASEM Medium Drum Base Only P3-DBASEM-(A) Perforated
Aluminum
18� 30� 28 1 /2� 98
P3-DBASEM-W( ) Veneer 18� 30� 28 1 /2� 98
P3-DBASEL Large Drum Base Only P3-DBASEL-(A) Perforated
Aluminum
23� 30� 28 1 /2� 110
P3-DBASEL-W( ) Veneer 23� 30� 28 1 /2� 110
P3-PBASE Peanut Base Only P3-PBASE-(A) Perforated
Aluminum
27� 8� 27 1 /2� 40
P3-PBASE-W( ) Veneer 27� 8� 27 1 /2� 40
P4-WM4 Wire management C-clips P4-WM4
FInishes
Peanut and Drum Base Finishes:
Perforated Aluminum (suffix A)
Veneer base finishes:
American Cherry (suffix X)
Bronzed Cherry (suffix V312)
Burnt Walnut (V313)
Ebonized Walnut (suffix D)
Light Cherry (suffix V315)
Maple (suffix K)
Medium Red Mahogany (suffix Z)
Natural Beech (suffix B)
Warm Brown Walnut (suffix J)
342
Features
Drum Bases:
Three different sizes of Drum bases are
offered to suit different depth tables.
When specifying drum bases alone,
please note that certain larger tables may
require a support frame underneath the
table top. Interior: fabricated sheet
metal with black powder coat finish.
All drum bases include an 11� cutout in
the footplate to allow enclosure of the
floor power monuments. The two side
panels of the drum are available in
perforated metal with a silver powder
coat finish or veneer. Veneer panels are
finished with black powder coat interior.
Panels feature black nylon fasteners, and
are easily removable without tools,
providing immediate access to wiring, in
compliance with UL guidelines.
Peanut Base:
The Peanut base is an S-shaped
extrusion that is 8� wide by 27� long to
allow enclosure of floor power
monuments. Two panels feature black
nylon fasteners and are easily removable
without tools, providing immediate
access to wiring, in accordance with UL
guidelines.
When specifying peanut base tables
alone, please note that vertain larger
tables may require a support frame
underneath the table top.
+ At least 2 Peanut bases per table must
be used.

pattern no. list
P3-DBASES-(A) $4,155.
P3-DBASES-W( ) 4,768.
P3-DBASEM-(A) 4,240.
P3-DBASEM-W( ) 4,853.
P3-DBASEL-(A) 4,491.
P3-DBASEL-W( ) 5,105.
P3-PBASE-(A) 2,979.
P3-PBASE-W( ) 3,715.
P4-WM4 31.
C-Clip:
Grey nylon C-clips can be drilled into
the underside of the table in desired
location to increase wire management
capabilities. C-clips are shipped with all
Drum and Peanut base tables with
frames. For other tables, specify
seperately.
Maintenance:
See pages 27-28.
Jumper cables available for hardwired
applications, see page 332.
343
KnollStudio

Emanuela Frattini
Propeller� Electrical
Plexus Box and Connectivity Options
Plexus Boxes for Training and Conference Tables are covered power and communications units mounted flush into the table top, offering a
clean aesthetic. Plexus Boxes are installed in the field and fit in pre-configured cutout locations in Propeller table tops. Various cutout
locations are available, see specific products pages for more information.
Plexus Box types and sizes:
Plexus Boxes are available in two lengths, medium and jumbo.
Medium boxes are also available in a double width format.
Medium Box (Conference and training tables)
P4S-BOXM-( )
Medium (10�) Shallow Plexus Box: offers room for two
duplex power outlets with surge protector, one
quadruple communication outlet and two additional
data plates.
Double Medium Box (Conference tables only)
P4SD-BOXM-( )
Ordering Information
To specify Plexus Boxes:
1. Determine power and data
requirements and suitable box size
2. Specify table type with required
cutout option. (see chart on table
product page)
3. Specify box(es).
4. Specify data outlets.
5. Specify infeed legs and finish
(empty and pre-wired versions only).
6. Specify jumper cables (pre-wired
version only).
Medium (10�) Shallow Plexus Box: offers room for four
duplex power outlets with surge protector, two
quadruple communications outlets and four additional
data plates.
Performance
Power options:
The Plexus Box is a four-circuit,
eight-wire power distribution
system. It includes two 20-amp
conveniene circuits (A,B), with
neutral and ground and two
protected 20-amp circuits (X,Y)
with separate neutral and ground.
All power outlets are preconfigured
to avoid circuit overload. If several
Plexus Boxes are connected
together, alternate configurations A
& B for optimal load distribution.
All power and communication
wiring is completely separated by
metal septum to avoid interference.
UL listed product. Medium cordset
comprises a single electrical circuit.
Additional data options are
available through CPD or can be
installed in the field by a licensed
data contractor.
344
Jumbo Box (Conference tables only)
P4S-BOXJ-( )
Communication options:
The Plexus Box is available with
either RJ11 jacks to be connected to
modular cables or with Category 5E
outlet. Category 5E jacks apply for
RJ45 and Category 5
communication wiring. Room for
two additional data plates in
medium box which can be wired by
Knoll through CPD or installed in
the field by a licensed data
contractor.
Shallow Plexus Box:
Fabricated steel body in powder
coat or anodized finish. Lid is
extruded aluminum in anodized
finish.
Jumbo (20�) Plexus Box; offers room for four
duplex power outlets with surge protector and two
quadruple communications outlets
Power and communications outlets
are positioned under a hinged lid to
allow access. The extruded
aluminum lid features a brush seal
allowing wires to pass when lid is
closed. On the inside, power and
communication outlets are placed
on a 60° angle.
Shallow Plexus Boxes are also
available in a double width format
for medium box.

Plexus Box Connectivity options:
Plexus Boxes are available with three connectivity options for either temporary or permanent installation.
Plexus Box with Cordset For temporary power and communications access.
P4( )-BOX( )-PP
Use existing leg.
Empty Plexus Box For hard-wired power and communications access. Compatible with legs shown below.
P4( )-BOX( )-E
Training leg
Conference leg
P4-RWIN4-RE (right) P3-CLEG-PE
P4-RWIN4-LE (left)
Trapezoid leg
P4-RWIN4-TE
C-Leg
P4-RWIN4-CRE (right)
P4-RWIN4-CLE (left)
Pre-wired Plexus Box For permanent power and communications access. Compatible with legs shown below.
P4( )-BOX( )-PR
Connectivity
Plexus Box with Cordset:
The Plexus Box with Cordset offers
temporary power and
communications access, comprising
a single electrical circuit with a
3-prong plug. The 15’ cable can
simply be channeled through the
Propeller leg to connect to standard
floor or wall outlets. Leg that is
shipped with the Propeller table is
used with the Plexus box with
Cordset.
Plexus Boxes with Cordset simply
rest in the table cutout. Do not
attach permanently to the table to
comply with UL requirements. This
option is not available for New York
and Chicago.
Training leg
P4-RWIN4-R (right)
P4-RWIN4-L (left)
Conference leg
P3-CLEG-PR
Empty Plexus Boxes for hardwiring:
The empty Plexus Box for
hardwiring offers permanent power
and data access and has room for
wiring up to four-circuits. A special
empty infeed leg (E) must be
specified to bring wires from
building power supply to first empty
Plexus Box. Suitable for all regions.
Pre-wired Plexus Boxes:
The Pre-wired Plexus Box offers
permanent power and data access.
A special Pre-wired infeed leg (R)
must be specified to bring wires
from building power supply to first
pre-wired Plexus Box.
Jumper cables connect individual
pre-wired Plexus Boxes together
and connect the first plexus Box to a
pre-wired infeed leg. Suitable for
most regions if connected to
building power by licensed
electrician.
Trapezoid leg
P4-RWIN4-T
345
Construction
T-Leg
P3-TLEGU-PE
C-Leg
P4-RWIN4-CR (right)
P4-RWIN4-CL (left)
Empty Plexus boxes attach to table
via clamps from underneath the
table top. Pre-wired and Cordset
Plexus Boxes simply rest in the
table cutout. Accomodates table
thickness from 1� to 1 1 /2�.
T-Leg
P3-TLEGU-PR
Cutout options
KnollStudio
Plexus cutout locations:
For cutout locations see chart on
specific product pages. Boxes ship
with actual cutout template in case
cutouts need to be done in the field.

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-PP-5-B-A
P4S- Medium shallow Plexus Box
BOXM-PP
5 Four category 5
transition cables
B ATT/Lucent
transition cables (non-EIA)
A Anodized Aluminum finish
Specify:
1. Plexus Box for cutout size
2. Desired data configuration
3. Select B for (ATT/Lucent) or A for
(EIA) wiring in building
4. Plexus Box lid finish
Emanuela Frattini
Propeller� Electrical
One-Circuit Plexus Boxes with Cordset
description pattern no. type w d h
P4S-BOXS-PP-2 small plexus box P4S-BOXS-PP-2 one electrical
duplex,
two RJ45 jacks
with
category 6
transition
cables
P4S-BOXS-PP-X small plexus box P4S-BOXS-PP-X one electical
duplex,
room for two
data faceplates
P4S-BOXM-PP medium shallow box with
cordset and surge protector
Finishes
Plexus Box lid finishes:
Aluminum (suffix A)
P4S-BOXM-PP-
11(A)
P4S-BOXM-PP-5-
(A,B)-(A)
P4S-BOXM-PP-
4511-(A,B)-(A)
346
two duplex, four
RJ11 jacks,
room for 2
additional data
plates
two duplex, four
RJ45 jacks,
room for 2
additional data
plates
two duplex, two
RJ11 jacks, two
RJ45 jacks,
room for 2
additional data
plates
Features
All power and communication wiring is
completely separated by metal septum to
avoid interference.
Shallow Plexus Box with Cordset:
The Shallow Plexus Box with cordset
offers temporary power and data access
at the table top. The height of the box is
only 2.8�; the data and electrical
receptacles are angled at 60 degrees for
easier access and complete knee
clearance. All power and communication
wiring is completely separated by a metal
septum to avoid interference. The
extruded aluminum hinge lid features a
brush seal, allowing for wires to pass
through when lid is closed. The shallow
box features a black circuit reset button.
7.5� 6.75� 2.8�
7.5� 6.75� 2.8�
10.5� 7� 2.8�
10.5� 7� 2.8�
10.5� 7� 2.8�
Shallow Plexus Box with cordset,
continued:
The Plexus Box with Cordset comprises a
single electrical circuit with a 3-prong
plug. The 15� cable can simply be
channeled through the Propeller leg to
connect to standard floor or wall outlets.
For horizontal wire management, use
wire management troughs on page 354.
Leg that is shipped with the Propeller
table is used with the Plexus box with
cordset.
UL listed product. Temporary Plexus
Boxes simply rest in the table cutout.
Universal in application. Do not attach
permanently to the table to comply with
UL requirements. This option is not
available for New York and Chicago.

pattern no. list price
P4S-BOXS-PP-2 $1,060.
P4S-BOXS-PP-X 710.
P4S-BOXM-PP-11(A) 1,376.
P4S-BOXM-PP-5-(A,B)-(A) 1,391.
P4S-BOXM-PP-4511-(A,B)-(A) 1,385.
Two box sizes are available:
• The medium box offers two duplex
outlets with a surge protector and four
communications jacks in three
configurations. There is room for two
additional plates. To specify
individual faceplates, see page 368.
Communication options:
The Plexus Box is available with either
Cat. 3 (RJ11) or Cat. 6 (RJ45) transition
cables, 20’ long dependent on box type,
that simply connect to like jacks,
indicated in parenthesis.
Small Plexus box with cordset:
The small shallow Plexus box with
cordset offers temporary power and data
access at the table top. A single
electrical duplex with one data faceplate
are angled at 60 degrees for ease of
access, with room for an additional
faceplate in floor of box. The extruded
Aluminum hinge lid features a brush seal
allowing wires to pass through when lid
is closed.
347
Construction
Small Plexus Box with cordset, continued:
A single electrical circuit with a 15’
cable and 3-prong plus connects to
standard floor or wall outlets. Available
in two configurations: pre configured
with two RJ45 Cat. 6 connectors with
room for a 20’ patch cords or with two
data plates. To specify data plates,
please see page 368.
Note:
To specify tables to accommodate the
small plexus box, tables with cut-outs
must be ordered through CPD.
Plexus Box:
Extruded aluminum body in anodized
finish. Sides are stamped steel with
aluminum powder-coat finish. Lid is
extruded aluminum in anodized finish.
Fabricated steel body in powder coat
annodized finish.
Accomodates tables up to 1 1 /4� thick.
Cut-out Dimensions:
Small 7.0� x 6.25�
Medium 6.5� x 10.25�
Double Medium 10.25� x 11.875�
Jumbo 6.5� x 20.25�
KnollStudio
Data Plates:
One plate fits up to four Cat 6/RJ45
cables. Medium shallow box has room
for 2 additional data places.
Electrical Componets:
Eagle Cooper (included in all shallow
boxes)
Black: 4270-5BK
Orange: IG5262-RN

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-PP-5-B-A
P4S- Medium shallow Plexus Box
BOXM-PP
5 Four category 5
transition cables
B ATT/Lucent
transition cables (non-EIA)
A Anodized Aluminum finish
Specify:
1. Plexus Box for cutout size
2. Desired data configuration
3. Select B for (ATT/Lucent) or A for
(EIA) wiring in building
4. Plexus Box lid finish
Emanuela Frattini
Propeller� Electrical
One-Circuit Plexus Boxes with Cordset
description pattern no. type w d h
P4SD-BOXM-PP medium shallow double
wide box with cordset and surge protector
Finishes
Plexus Box lid finishes:
Aluminum (suffix A)
P4SD-BOXM-PP-
11(A)
P4SD-BOXM-PP-
5-(A,B)-(A)
P4SD-BOXM-PP-
4511-(A,B)-(A)
348
four duplex,
eight RJ11
jacks, room for
4 additional
data plates
four duplex,
eight RJ45
jacks, room for
4 additional
data plates
four duplex,
four RJ11 jacks,
four RJ45 jacks,
room for 4
additional data
plates
Features
All power and communication wiring is
completely separated by metal septum to
avoid interference.
Shallow Plexus Box with Cordset:
The Shallow Plexus Box with cordset
offers temporary power and data access
at the table top. The height of the box is
only 2.8�; the data and electrical
receptacles are angled at 60 degrees for
easier access and complete knee
clearance. All power and communication
wiring is completely separated by a metal
septum to avoid interference. The
extruded aluminum hinge lid features a
brush seal, allowing for wires to pass
through when lid is closed. The shallow
box features a black circuit reset button.
10.5� 12.5� 2.8�
10.5� 12.5� 2.8�
10.5� 12.5� 2.8�
Shallow Plexus Box with cordset,
continued:
The Plexus Box with Cordset comprises a
single electrical circuit with a 3-prong
plug. The 15� cable can simply be
channeled through the Propeller leg to
connect to standard floor or wall outlets.
For horizontal wire management, use
wire management troughs on page 354.
Leg that is shipped with the Propeller
table is used with the Plexus box with
cordset.
UL listed product. Temporary Plexus
Boxes simply rest in the table cutout.
Universal in application. Do not attach
permanently to the table to comply with
UL requirements. This option is not
available for New York and Chicago.

pattern no. list price
P4SD-BOXM-PP-11(A) $2,134.
P4SD-BOXM-PP-5-(A,B)-(A) 2,138.
P4SD-BOXM-PP-4511-(A,B)-(A) 2,238.
Two box sizes are available:
• The medium box offers two duplex
outlets with a surge protector and four
communications jacks in three
configurations. There is room for two
additional plates. To specify
individual faceplates, see page 368.
Communication options:
The Plexus Box is available with either
Cat. 3 (RJ11) or Cat. 6 (RJ45) transition
cables, 20’ long dependent on box type,
that simply connect to like jacks,
indicated in parenthesis.
Small Plexus box with cordset:
The small shallow Plexus box with
cordset offers temporary power and data
access at the table top. A single
electrical duplex with one data faceplate
are angled at 60 degrees for ease of
access, with room for an additional
faceplate in floor of box. The extruded
Aluminum hinge lid features a brush seal
allowing wires to pass through when lid
is closed.
349
Construction
Small Plexus Box with cordset, continued:
A single electrical circuit with a 15’
cable and 3-prong plus connects to
standard floor or wall outlets. Available
in two configurations: pre configured
with two RJ45 Cat. 6 connectors with
room for a 20’ patch cords or with two
data plates. To specify data plates,
please see page 368.
Note:
To specify tables to accommodate the
small plexus box, tables with cut-outs
must be ordered through CPD.
Plexus Box:
Extruded aluminum body in anodized
finish. Sides are stamped steel with
aluminum powder-coat finish. Lid is
extruded aluminum in anodized finish.
Fabricated steel body in powder coat
annodized finish.
Accomodates tables up to 1 1 /4� thick.
Cut-out Dimensions:
Small 7.0� x 6.25�
Medium 6.5� x 10.25�
Double Medium 10.25� x 11.875�
Jumbo 6.5� x 20.25�
KnollStudio
Data Plates:
One plate fits up to four Cat 6/RJ45
cables. Medium shallow box has room
for 2 additional data places.
Electrical Componets:
Eagle Cooper (included in all shallow
boxes)
Black: 4270-5BK
Orange: IG5262-RN

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-E-A
P4S- Medium shallow plexus box,
BOXM-E empty
A Anodized finish
Specify: Propeller table with desired
cutout size and location
1. Plexus box size
2. Anodized finish
Can also specify:
1. Empty leg, refer to page 358.
2. Electrical outlets, refer to page 358.
3. Communication outlets, refer to page
358.
4. Jumper cable to connect empty leg to
1st plexus (female-male), refer to
page 358.
5. Jumper cable to connect plexus boxes
(male-male), refer to page 358.
Power outlets to be installed by electrical
contractor; communication outlets to be
installed by licensed communications
contractor.
Emanuela Frattini
Propeller� Electrical
Empty Plexus Boxes for Hardwiring
description pattern no. accommodates w d h
P4S-BOXM-E medium shallow box, empty P4S-BOXM-E-(A) two duplex,
room for three
additional data
plates
P4S-BOXJ-E jumbo shallow box, empty P4S-BOXJ-E-(A) four duplex,
room for four
additional data
plates
P4SD-BOXM-E double shallow medium
box, empty
Finishes
Plexus Box lid/infeed leg finishes:
Aluminum (suffix A)
P4SD-BOXM-E-
(A)
350
four duplex,
room for six
additional data
plates
Empty Shallow Plexus for hardwiring
The Plexus Box offers room for wiring up
to four-circuits. A special empty infeed
leg must be specified to bring wires from
building power supply to Plexus Box. UL
listed product. Empty Plexus Boxes
simply attach to table with clamps from
underneath the table top. Universal in
application. Suitable for all regions if
installed by licensed electrician.
The empty Shallow Plexus Box offers
permanent power and data access at the
table top. The height of the box is only
2.8�; the data and electrical receptacles
are angled at 60 degrees for easier access
and complete knee clearance. All power
and communication wiring is completely
seperated by a metal septum to avoid
interference.
The extruded aluminum hinge lid
features a brush seal, allowing for wires
to pass when lid is closed. The shallow
box features a black reset button.
10.5� 7� 2.8�
20.5� 7� 2.8�
10.5� 12.5� 2.8�
Outlets:
Power outlets to be provided by electrical
contractor. For communication outlets
please refer to page 368. Communication
outlets may also be provided by
communications contractor.

pattern no. list price
P4S-BOXM-E-(A) $734.
P4S-BOXJ-E-(A) 1,205.
P4SD-BOXM-E-(A) 1,318.
Construction
Plexus Box:
Extruded aluminum body in anodized
finish. Sides are stamped steel with
aluminum powder-coat finish. Lid is
extruded aluminum in anodized or
powder-coat finish.
Accomodates tables up to 1 1 /4� thick.
Cut-out Dimensions:
Small 7.0� x 6.25�
Medium 6.5� x 10.25�
Double Medium 10.25� x 11.875�
Jumbo 6.5� x 20.25�
Infeed leg:
Standard conference leg: extruded
aluminum with anodized or powder-coat
finish. One section of leg is completely
enclosed for electrical wiring, other
section has clear flexible PVC strips to
lay in communication wiring. Stamped
steel mounting plates with powder-coat
finish. Black nylon glides. Specify ’PE’
version of leg when ordering i.e.
P3-TLEGU-PE for use with a T-leg table
and empty plexus box. Data Plates:
Medium box has room for three data
plates. Each plate can fit up to four Cat
6/RJ45 jacks.
351
KnollStudio

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-PR-A
P4S-
BOXM-
PRA
Medium shallow plexus box,
prewired
A Andonized legs
Specify:
1. Plexus box size
2. Specify Duplex A and X or B and Y
3. Andonized finish
Can also specify:
1. Communication outlets, refer to page
358.
2. Prewired leg, refer to page 358.
3. Jumper to connect plexus boxes
(male/male), refer to page 358.
4. Jumper to connect 1st plexus box to
leg (female/male), refer to page 358.
Emanuela Frattini
Propeller� Electrical
Pre-Wired Plexus Boxes
description pattern no. type w d h
P4S-BOXM-PR medium shallow box,
pre-wired
P4S-BOXJ-PR jumbo shallow box,
pre-wired
P4SD-BOXM-PR double medium shallow
box, pre-wired
Finishes
Plexus Box lid/infeed leg finishes:
Aluminum (suffix A)
P4S-BOXM-PRA-(A) one duplex
A, one
duplex X,
room for 3
data plates
P4S-BOXM-PRB-(A) one duplex
B, one duple
Y, room for 3
data plates
P4S-BOXJ-PRA-(A) two duplex
A, two
duplex X,
room for 4
data plates
P4S-BOXJ-PRB-(A) two duplex
B, two
duplex Y,
room for 4
data plates
P4SD-BOXM-PRA-(A) 2 duplex A,
2 duplex X,
room for 6
data plates
P4SD-BOXM-PRB-(A) 2 duplex B,
2 duplex Y,
room for 6
data plates
352
Features
Pre-wired Plexus Boxes:
The pre-wired Plexus Box offers
permanet electrical power and data
access at the table top. The data and
electrical receptacles are angled at 60
degrees for easier access. Additional
data faceplates are located on box floor.
The extruded aluminum hinge lid
features a brush seal, allowing wires to
pass when lid is closed.
10.5� 7� 2.8�
10.5� 7� 2.8�
20.5� 7� 2.8�
20.5� 7� 2.8�
10.5� 12.5� 2.8�
10.5� 12.5� 2.8�
All power and communication wiring is
completely seperated by a metal septum
to avoid interference.
The Plexus Box is a four-circuit,
eight-wire power distribution system that
includes two 20-amp convenience
circuits (A,B), with neutral and ground
and two protected 20-amp circuits (X,Y)
with separate neutral and ground. All
power outlets are pre-configured to avoid
circuit overload. If several Plexus Boxes
are connected together, alternate
configurationsA&Bforoptimal load
distribution. The pre-wired system
consists of three components:

pattern no. list price
P4S-BOXM-PRA-(A) $1,309.
P4S-BOXM-PRB-(A) 1,309.
P4S-BOXJ-PRA-(A) 1,895.
P4S-BOXJ-PRB-(A) 1,895.
P4SD-BOXM-PRA-(A) 2,289.
P4SD-BOXM-PRB-(A) 2,289.
• Plexus boxes with outlets.
• A special pre-wired infeed leg for
connection to the building power. All
conference and training leg versions
are available.
• Jumper cables to connect individual
Plexus Boxes and to connect the first
Plexus Box to pre-wired infeed leg.
UL listed product. Suitable for most
regions if connected to building electric
by licensed electrician.
Electrical Components:
Eagle Cooper (included in all shallow
plexus boxes)
Black: 4270-5BK
Orange: IG5262-RN
Data Plates:
Data Plates can fit up to four Cat 6/RJ45
cables. To specify please see page 368.
Jumper cables:
Jumper cables ensure power connection
between infeed legs and first Plexus Box
and between each consecutive box.
Length calculated for maximum distance.
Jumper cables ship with clamps for
attachment underneath table top.
353
Construction
Plexus Box:
Extruded aluminum body in anodized
finish. Sides are stamped steel with
aluminum powder-coat finish. Lid is
extruded aluminum in anodized or
powder-coat finish.
Accomodates tables up to 1 1 /4� thick.
Cut-out Dimensions:
Small 7.0� x 6.25�
Medium 6.5� x 10.25�
Double Medium 10.25� x 11.875�
Jumbo 6.5� x 20.25�
KnollStudio
Infeed leg:
Leg: extruded aluminum with anodized
or powder-coat finish. One section of leg
is completely enclosed for electrical
wiring, other section has clear flexible
PVC strips to lay in communication
wiring. Stamped steel mounting plates
with powder-coat finish. Black nylon
glides. Please specify ’PR’ version of leg
i.e., specify P3-CLEG-PR for a
conference leg to match a pre-wired
Plexus box.
Pre-wired infeed leg has 6� open wire
cord for attachment to building power via
junction box.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-PT11-A
P4-PT11 Quadruplex monument, 2
power and 2 RJ11 outlets
A Anodized
Example: P4-BOXT-45-SS
P4-BOXT-
45
Transact box with cordset
SS Stainless steel finish
Specify:
1. Pattern number
2. Finish (grommet only)
Emanuela Frattini
Propeller� Electrical
Quadruplex and Wire Management
description pattern no. type w d h
P4-P/T 360° quadruplex desktop monument
for use in grommet
P4-PT4511-( ) 2 power outlets,
1RJ11,
1RJ45/CAT5e
jack
P4-PT11-( ) 2 power outlets,
2 RJ11 jacks
P4-PT45-( ) 2 power outlets,
2 RJ45/CAT5e
jacks
P4-PP-( ) 4 power outlets
P4-TT11-( ) 4 RJ11 jacks
P4-TT45-( ) 4 RJ45/CAT5e
jacks
P4-WMT Double wire management trough P4-WMT-18 18� 5� 1�
P4-WMT-32 32� 5� 1�
P4-WMT-44 44� 5� 1�
P4-WMT-56 56� 5� 1�
P4-WMT-96 96� 5� 1�
P4-AWB Equity worksurface cable basket P4-AWB20 20� 4� 2�
P4-AWB26 26� 4� 2�
P4-AWB32 32� 4� 2�
P4-AWB36 36� 4 2�
P4-AWB42 42� 4� 2�
P4-MRI Wire management clips (10) P4-MRI
P4-GR Grommet replacement sleeve and
cover
Finishes
Quadruplex finishes:
Black (suffix BK)
Silver anodized (suffix A)
P4-GR-( ) 3 1 /4� 1 1 /4�
354
Features
Quadruplex monument:
Four combined power and/or telephone
outlets in one single desktop monument.
Power hemisphere has two power outlets
with one common ground. UL listed. 10’
cord. Telephone hemisphere has two
telephone outlets (RJ11 or RJ45). Six
combinations of power and telephone
outlets available. Fits in standard size
Propeller grommet with adapter shipped
with unit. Composed of two 180° black or
silver powder-coat ABS plastic dome
segments. Data cables not provided.
Recommended Patch Cord:
Belkin� #A3L791, available through
www.belkin.com.
Small Plexus box with cordest:
The small shallow Plexus box with
cordset offers temporary power and data
access at the table top. A single
electrical duplex with one data faceplate
are angled at 60 degrees for ease of
access, with room for additional faceplate
in floor of box. The extruded Aluminum
hinge lid features a brush sale allowing
wires to pass through when lid is closed.
A single electrical circuit with a 15’
cable and 3-prong plug connects to
standard floor or wall outlets. Available
in two configurations: pre configured
with two RJ45 Cat. 6 connectors with 20’
patch cords or with room for two data
plates. To specify data plates, please see
page 368.

pattern no. list price
P4-PT4511-( ) $269.
P4-PT11-( ) 254.
P4-PT45-( ) 261.
P4-PP-( ) 276.
P4-TT11-( ) 232.
P4-TT45-( ) 248.
P4-WMT-18 25.
P4-WMT-32 33.
P4-WMT-44 43.
P4-WMT-56 55.
P4-WMT-96 84.
P4-AWB20 43.
P4-AWB26 47.
P4-AWB32 56.
P4-AWB36 57.
P4-AWB42 61.
P4-MRI 31.
P4-GR-( ) 34.
Morrison wire management clips:
Plastic clips with fastener can be drilled
on the underside of the table in desired
location to hold up wires and cables.
Simply drill a pilot hole in the desired
location .7� deep (use 15 /32� drill).
Wire management troughs:
Rigid black PVC plastic.
Maintenance:
See pages 27-28.
355
KnollStudio

Order Code
Example: P4SEDA-L2-BLK
P4SEDA Sequence, duplex
receptacle with data adapter
L2 Link #2
BLK Molded Black finish
Specify:
1. Pattern number
2. Starter or numbered link
3. Finish
Emanuela Frattini
Propeller� Electrical
Sequence, duplex receptacle
description pattern no. type
P4SEDA-S1 Sequence Starter,
Data adapter included (no jacks, no cables)
P4SEDA-(L2-L8) Sequence Link,
Data adapter included (no jacks, no cables)
P4SE45-S1 Sequence Starter,
with Cat. 5e data couplers and transition
cables
P4SE45-(L2-L8) Sequence Link,
with Cat. 5e data couplers and transition
cables
P4SECDA Sequence desktop monument,
with cordset, data adapter included
P4SEC45 Sequence desktop monument,
with cordset, Cat. 5e data couplers and
transition cables
Finishes
Sequence finishes:
Black (suffix BLK)
Silver paint (suffix SLV)
P4SEDA-S1-BLK 2 power outlets,
data adapters,
starter
P4SEDA-S1-SLV 2 power outlets,
data adapters,
starter
P4SEDA-(L2-L8)-BLK 2 power outlets,
data adapters,
linking unit
P4SEDA-(L2-L8)-SLV 2 power outlets,
data adapters,
linking unit
P4SE45-S1-BLK 2 power outlets,
2 RJ45 couplers,
2 Cat 5e patch cords,
starter unit
P4SE45-S1-SLV 2 power outlets,
2 RJ45 couplers,
2 Cat 5e patch cords,
starter unit
P4SE45-(L2-L8)-BLK 2 power outlets,
2 RJ45 couplers,
2 Cat. 5e patch cords,
linking unit
P4SE45-(L2-L8)-SLV 2 power outlets,
2 RJ45 couplers,
2 Cat. 5e patch cords,
linking unit
P4SECDA-BLK 2 power outlets,
data adapters,
cordset unit
P4SECDA-SLV 2 power outlets,
data adapters,
cordset unit
P4SEC45-BLK 2 power outlets,
2 RJ45 couplers,
2 Cat. 5e patch cords,
cordset
P4SEC45-SLV 2 power outlets,
2 RJ45 couplers,
2 Cat. 5e patch cords,
cordset
356
Features
Convenient single circuit, 15 amp power
and data distribution; each unit houses
two electrical receptacles and room for
data jacks per unit. Available configured
with two RJ45 couplers and Cat. 5e
patch cords. Adapter kit provides
adapters for a variety of manufacturers
jacks and couplers. See Propeller
Manual for compatibility chart.
Sequence units may be linked together to
supply electrical power to each unit form
one electrical power source via a
standard three prong plug. Specify units
in numerical order beginning with a
starter unit, e.g., Starter–Link #2–Link
#3. Links are color coded and cannot be
connected out of sequence. Starter cable
is 120� in length and linking cables are
60� in length.

KnollStudio
pattern no. list
P4SEDA-S1-BLK $327.
P4SEDA-S1-SLV 344.
P4SEDA-(L2-L8)-BLK 248.
P4SEDA-(L2-L8)-SLV 265.
P4SE45-S1-BLK 443.
P4SE45-S1-SLV 461.
P4SE45-(L2-L8)-BLK 364.
P4SE45-(L2-L8)-SLV 382.
P4SECDA-BLK 239.
P4SECDA-SLV 256.
P4SEC45-BLK 356.
P4SEC45-SLV 373.
357

Emanuela Frattini
Propeller� Electrical
2+2 Raceway Kit Electrical options for Training and Conference
tables
The Propeller raceway kit is used when a permanent configuration with rectangular and trapezoid training tables is specified. Typical examples for such
situations are desk configurations, cluster desk configurations, computer training room setups. The raceway kit offers permanent power and communication
outlets accessible from underneath the top. Access to these outlets is provided through grommets in the table. Quadruplex or transact outlets may also bring
the wiring up to the table top.
Raceway kit components
The Propeller Raceway kit is comprised of three components:
Infeed leg, Raceway, Jumper cable and the power and
communications outlets.
Power infeed legs:
Provides permanent power and communications access. Alternatively empty infeed legs can also be specified.
Raceway compatible with legs shown below.
Ordering Information
Specify:
1. Suitable raceway for every table
2. Jumper cables for every
table-to-table connection.
3. Power infeed leg
4. Power infeed leg finish
5. Power and communications
outlets
Description
Raceway kit:
The2+2Raceway kit is a
four-circuit, eight-wire modular
power distribution system available
for all Knoll systems. Raceway
components distribute two 20 amp
convenience circuits (A,B) with
shared neutral and ground and two
surge protected 20 amp circuits (X,
Y) with separate neutral and
ground. Each raceway has four
connectors for jumper cables, two
on left and two on the right. This
allows for configurations with
branching side connections from the
overall circuit.
Raceway:
Raceways are available in various different lengths. All raceways offer room for
two duplex power outlets with surge protection. The 20�,26�,38� long raceway
also has pre-cut holes for installation of two double communication outlets.
Raceways are compatible with training and trapezoid tables and can be located
in the front of mid-depth positions of all tables, and also at the back of the
trapezoid table.
Jumper cables:
There are two types of jumper cables. Male-Female jumper cables are used to
connect power infeed legs to the first plexus box or first raceway. Male-male
jumper cables are used to connect between plexus boxes or between raceways.
358
A complete Raceway Kit consists of:
- Pre-assembled Raceway mounted
inside metal trough. One raceway
per table required.
- Jumper cables for bridging power
between raceways on ganged tables.
- Power infeed legs bring power
from building power to raceway.
Construction
Raceway:
Bent sheet metal trough with dark
grey finish. Raceway is fully
enclosed in metal trough.
Jumper cables:
Electrical conduit encased in a
flexible metal tube with electrical
connectors on both ends.
Power infeed leg:
Extruded aluminum leg with glide
and cast aluminum end plate or cast
aluminum foot for C-legs or T-legs
Wiring is shielded inside fully
enclosed leg section. 6’ conduit
emanating from bottom of leg for
connection to building power. 9 1 /4�
long jumper cable emanating from
top of leg is used to connect power
infeed leg to raceway.

Typical Raceway configurations:
Virtually any electrical layout can be realized by utilizing the power infeed leg, proper lengths of raceway and jumper cables. Raceways provide combinations of
duplex power outlets and duplex communications outlets. The length of the table top defines the length of the raceway.
90� Desking configuration:
Consists of a power infeed leg, a long and
short raceway and 2 jumper cables
Linear computer training configuration:
Consists of a power infeed leg, 2 raceways of equal length
mounted at front of desk, and 2 jumper cables. This configuration
may be extended to incorporate any number of desks.
Specifications
Raceway:
All raceways include a pre-installed
power rail that fits 2 duplex outlets.
The 20�,26�,38�long raceway also
has pre-cut holes for installation of
two double communication outlets.
Raceways ship with special locking
connectors for permanently ganging
tables.
Communication wiring has to be
field installed by communication
contractor.
Raceway kits do not include wire
management trough for surplus
wires. Specify P4-WMT or P4-AWB
for storage of surplus wires.
Note: all tables must be ganged
permanently with electrical
connectors when Raceway Kit is
used.
Duplex outlets:
Duplex outlet circuits are
designated by white letters on black
background. Two duplex outlets
marked for a specific circuit can be
specified. Choose none, one or two
duplex outlets per raceway. Each
raceway kit can receive two duplex
outlets of the same or of different
circuits.
Communications modules:
AMP outlet faceplates have black
textured finish. A maximum of two
double communications outlets can
be specified for different wiring and
standards. AMP RJ45 outlets are
available with EIA-T568B (ATT
wiring) or EIA-T568A (all other EIA
wiring) configurations. All RJ45
communications outlets are
specially configured and rated for
359
Cluster configuration:
Consists of a power infeed leg of 4 short and long raceways connected by 8
jumper cables.
Curved training configuration:
Consists of a power infeed leg, 3 raceways of equal length mounted at
mid-depth of desk, and 3 jumper cables.
Category 5 high speed data cabling,
except those with couplers (Cat 3).
For more communications module
options, consult the Currents
pricelist.
Jumper cables:
Jumper cables connect power from
raceway to raceway, bridging
between tables. They consist of
electrical conduit encased in a
flexible metal tube with electrical
connectors on both ends. Different
length jumper cables are required
depending on the configuration.
KnollStudio
Pre-wired, power infeed leg:
Pre-wired, power infeed leg supplies
raceway with power from building
power source. Extruded aluminum
with anodized or powder coat finish.
One section of the leg is fully
enclosed for electrical wiring, the
other has a clear, flexible PVC strip
to lay in data cables.
A91 /4� long cable emanating from
top of leg is used to connect power
infeed leg to raceway. 6’ conduit
emanating from bottom of leg is
used for hard-wiring leg to building
power. This can be cut to length
during installation.
Specify left leg if infeed is located
left of raceway, right leg if infeed is
located right of raceway. Installation
by licensed electrician only.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWR60
P4 Propeller accessory
RW Raceway
R For rectangular table
60 For 60� wide table
Specify:
1. Suitable raceway kit for every table
2. Jumper cables for every table-to-table
connection
3. Power infeed leg (one per raceway)
4. Power infeed leg finish
5. Power and communication outlets
Emanuela Frattini
Propeller� Electrical
2+2 Raceway Components
description pattern no. type w d h
P4-RWR Power Raceway Kit for rectangular
table
P4-RWT Power Raceway Kit for trapezoid
table
P4-RWR48 48� w rect tbls 14� 2 1 /2� 3 1 /4�
P4-RWR60 60� w rect tbls 26� 2 1 /2� 3 1 /4�
P4-RWR66 66� w rect tbls 26� 2 1 /2� 3 1 /4�
P4-RWR72 72� w rect tbls 38� 2 1 /2� 3 1 /4�
P4-RWT Trapezoid table,
long side
Two RJ11 AMP (box of 10) P4-PDC-22 Two RJ11, 110
termination
P4-PDC-21 Two RJ11,
couplers
Two RJ45 AMP (box of 10) P4-PDC-12 Two RJ45,
couplers
P4-AMP-2A Two RJ45, IDC,
EIA-T568A/6+5
P4-AMP-2B Two RJ45, IDC,
EIA-T568B/6+5
RJ11/RJ45 AMP (box of 10) P4-AMP1145A RJ11, RJ45, 110,
EIA-T568A/6+5
P4-AMP1145B RJ11, RJ45, 110,
EIA-T568B/6+5
P4-PDC-24 RJ11, RJ45,
couplers
P4-RW-D Duplex outlets, black P4-RWDA Circuit A
P4-RWDB Circuit B
P4-RWDX Circuit X
P4-RWDY Circuit Y
P4-RW-DO Duplex outlets, orange P4-RWDOX Circuit X
P4-RWDOY Circuit Y
Ordering Information
Infeed leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
Propeller raceway:
Propeller2+2Raceway is a four-circuit,
eight-wire modular power distribution
system available for all Knoll Systems. 2
+ 2 Raceway components distribute two
20-amp convenience circuits (A, B), with
neutral and ground, and two protected
20-amp circuits (X, Y) with separate
neutral and ground. UL183 listed for use
on tables.
360
A complete Propeller Raceway consists
of pre-assembled raceway kits mounted
inside metal troughs, jumper cables and
infeed legs.
• One raceway kit per table required.
• Jumper cables bridge power between
tables.
• Power infeed legs bring power from
building power to raceway.
The raceway circuit is connected to the
building power via a junction box.
Installation by licensed electrician only.
Maintenance:
See pages 27-28.
20� 2 1 /2� 3 1 /4�
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway.
Raceway:
All raceways include a pre-installed
power rail that fits 2 duplex outlets. The
20�,26�,38� long raceway also has
pre-cut holes for installation of two
double communication outlets. The 14�
raceway can fit either 2 duplex outlets or
one duplex outlet and one double
communications outlet. Raceways ship
with special locking connectors for
permanently ganging tables.

pattern no. list price
P4-RWR48 $436.
P4-RWR60 464.
P4-RWR66 464.
P4-RWR72 491.
P4-RWT 464.
P4-PDC-22 492.
P4-PDC-21 492.
P4-PDC-12 492.
P4-AMP-2A 563.
P4-AMP-2B 563.
P4-AMP1145A 527.
P4-AMP1145B 527.
P4-PDC-24 492.
P4-RWDA 34.
P4-RWDB 34.
P4-RWDX 34.
P4-RWDY 34.
P4-RWDOX 40.
P4-RWDOY 40.
Communication wiring has to be field
installed by communication contractor.
Raceway kits do not include wire
management trough for surplus wires.
Use P4-WMT/P4-WMTR
on page 358 for storage of surplus wires.
Jumper cables:
Jumper cables ensure power connection
in a straight line configuration, or for
tables
joined perpendicularly, or for
configurations with bridges or segments
between tables.
Jumper cables ship with clamps for
attachment underneath table top.
Power infeed leg:
Supplies raceway with power from
building power source. Complete leg
assembly hard- wired inside, fully
enclosed wiring. Use junction box to
connect raceway to building power.
Specify left leg if infeed is located left of
raceway, right leg if infeed is located
right of raceway. Power infeed has 6�
cord for hard wiring that can be cut to
length during installation of raceway.
Cord must be cut to 18� length or less for
application in New York City.
361
Duplex outlets:
Duplex outlet circuits are designated by
white letters on black background.
Communication modules:
AMP outlet faceplates are black textured
finish.
AMP RJ45 outlets are available with
EIA-T568B (ATT wiring) or EIA-T568A
(all other EIA wiring) configurations.
All RJ45 data/communication outlets are
specially configured and rated for
Category 5 high speed data cabling,
except those with couplers (Cat 3).
KnollStudio
Construction
Power infeed leg:
Extruded aluminum leg with glide and
cast aluminum end plate or cast
aluminum foot for C-legs or T-legs.
Wiring is shielded inside fully enclosed
leg section. 6� open lines to attach
junction box on bottom of leg. 9 1 /4� long
jumper infeed end at top of infeed leg
connects to raceway kit.
Raceway Kits:
Bent sheet metal trough with dark
metallic grey finish (suffix V).
Raceway is fully enclosed in metal
trough.
Refer to page 362 for jumper cables.

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWMFJ17
P4RWMF Female-male jumper cable
to connect power infeed leg
to first plexus box or first
raceway
J17 17� female/male jumper
cable
Specify:
1. Male-male or male-female jumper
cable connection
2. Length of jumper cable needed
Emanuela Frattini
Propeller� Electrical
Jumper Cables for Raceway Kit and Pre-Wired Plexus Boxes
description pattern no. type w
P4-RWJ Male-male jumper cable- to
connect between plexus boxes or between
raceways
P4-RWMF Female-male jumper cable- to
connect power infeed leg to first plexus box
or first raceway
P4-RWJ10 10�
P4-RWJ17 17�
P4-RWJ27 27�
P4-RWJ37 37�
P4-RWJ47 47�
P4-RWJ57 57�
P4-RWJ67 67�
P4-RWMFJ10 10�
P4-RWMFJ17 17�
P4-RWMFJ27 27�
P4-RWMFJ37 37�
P4-RWM Infeed cable P4-RWM30 Prewired power connection for
drum/peanut
P4-RWM96 Prewired power connection for
drum/peanut
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway. Building power must be
turned off before reconfiguration.
Jumper cables:
Jumper cables ensure power connection
in a straight line configuration, or for
tables joined perpendicularly, or for
configurations with bridges or segments
between tables.
Jumper cables ship with clamps for
attachment underneath table top.
362
Jumper cables: Training
Jumper cables ensure power connection
between legs and raceway kits under
each table.
Raceway jumper connections:
Male-male jumper cables for connection
between raceway kits.
Female-male jumper cables for
connection between power infeed leg and
raceway kit.
Plexus jumper connections:
Male-male jumper cables for connection
between Plexus boxes.
Female-male jumper cables for
connection between power infeed leg and
Plexus box.
30�
96�

KnollStudio
pattern no. list price
P4-RWJ10 $88.
P4-RWJ17 93.
P4-RWJ27 106.
P4-RWJ37 113.
P4-RWJ47 124.
P4-RWJ57 133.
P4-RWJ67 143.
P4-RWMFJ10 88.
P4-RWMFJ17 93.
P4-RWMFJ27 106.
P4-RWMFJ37 113.
P4-RWM30 159.
P4-RWM96 278.
363

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWIN4-L(A)
P4-RWIN4-
L
Infeed leg for rectangular
table,
left
A Anodized finish
Specify:
1. Power infeed leg
2. Power infeed leg finish
Emanuela Frattini
Propeller� Electrical
Leg Options for Training and Conference Tables
Leg Options for Prewired Plexus Boxes
description pattern no. type
P3-CLEG-PR P3-CLEG-PR-( ) Conference Std. leg, Prewired
(Universal)
P3-TLEGU-PR P3-TLEGU-PR-( ) T-Leg, Prewired (Universal)
P3-TLEGU-PR30-( ) T-Leg, Prewired (Universal) for 30�
Tables
P4-RWIN4-CL P4-RWIN4-CL-( ) C-Leg, Prewired (Left)
P4-RWIN4-CR P4-RWIN4-CR-( ) C-Leg, Prewired (Right)
P4-RWIN4-T P4-RWIN4-T-( ) Trapezoid Std. leg, Prewired
(Universal)
P4-RWIN4-RR P4-RWIN4-RR-( ) Training Std. leg, Prewired (Right)
P4-RWIN4-RL P4-RWIN4-RL-( ) Training Std. leg, Prewired (Left)
Finishes
Infeed leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
364
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway. Building power must be
turned off before reconfiguration.
Infeed leg:
Standard leg: extruded aluminum with
anodized or powder-coat finish. One
section of leg is completely enclosed for
electrical wiring, other section has clear
flexible PVC strips to lay in
communication wiring. Stamped steel
mounting plates with powder-coat finish.
Black nylon glides.

pattern no. list price
P3-CLEG-PR-( ) $703.
P3-TLEGU-PR-( ) 1,062.
P3-TLEGU-PR30-( ) 1,017.
P4-RWIN4-CL-( ) 1,062.
P4-RWIN4-CR-( ) 1,062.
P4-RWIN4-T-( ) 462.
P4-RWIN4-RR-( ) 462.
P4-RWIN4-RL-( ) 462.
Standard conference, trapezoid and
T-Legs are universal and can be used on
either side of the table. For C-Legs and
training specify right or left.
C-Leg & T-Leg: Extruded aluminum with
anodized or powder-coat finish. One
section of leg is completely enclosed for
electrical wiring, other section has clear
flexible PVC strips to lay in
communication wiring. Cast aluminum
foot plate with textured surface with
powder-coat finish matching the leg
finish. Steel mounting plates with
powder-coat finish.
365
Cast aluminum foot plate with textured
surface with powder-coat finish matching
the leg finish. Steel mounting plates with
powder-coat finish. Black nylon glides.
KnollStudio

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWIN4-RE(A)
P4-RWIN4-
RE
infeed leg for rectangular
table,
right
A anodized finish
Specify:
1. Power infeed leg
2. Power infeed leg finish
Emanuela Frattini
Propeller� Electrical
Leg Options for Training and Conference Tables
Leg Options for Empty Plexus Boxes
description pattern no. type
P3-CLEG-PE P3-CLEG-PE-( ) Conference Std. leg, Empty
(Universal)
P3-TLEGU-PE P3-TLEGU-PE-( ) T-Leg, Empty (Universal)
P3-TLEGU-PE30-( ) T-Leg, Empty (Universal) for 30�
tables
P4-RWIN4-RER P4-RWIN4-RER-( ) Training Std. leg, Empty (Right)
P4-RWIN4-REL P4-RWIN4-REL-( ) Training Std. leg, Empty (Left)
P4-RWIN4-CRE P4-RWIN4-CRE-( ) C-Leg, Empty (Right)
P4-RWIN4-CLE P4-RWIN4-CLE-( ) C-Leg, Empty (Left)
P4-RWIN4-TE P4-RWIN4-TE-( ) Trapezoid Std. Leg, Empty
Finishes
Infeed leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
366
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway. Building power must be
turned off before reconfiguration.
Infeed leg:
Standard leg: extruded aluminum with
anodized or powder-coat finish. One
section of leg is completely enclosed for
electrical wiring, other section has clear
flexible PVC strips to lay in
communication wiring. Stamped steel
mounting plates with powder-coat finish.
Black nylon glides.
Standard conference, trapezoid and
T-Legs are universal and can be used on
either side of the table. For C-Legs and
training, specify right or left.

pattern no. list price
P3-CLEG-PE-( ) $490.
P3-TLEGU-PE-( ) 654.
P3-TLEGU-PE30-( ) 627.
P4-RWIN4-RER-( ) 348.
P4-RWIN4-REL-( ) 348.
P4-RWIN4-CRE-( ) 884.
P4-RWIN4-CLE-( ) 884.
P4-RWIN4-TE-( ) 348.
C-Leg & T-Leg: Extruded aluminum with
anodized or powder-coat finish. One
section of leg is completely enclosed for
electrical wiring, other section has clear
flexible PVC strips to lay in
communication wiring. Cast aluminum
foot plate with textured surface with
powder-coat finish matching the leg
finish. Steel mounting plates with
powder-coat finish.
Cast aluminum foot plate with textured
surface with powder-coat finish matching
the leg finish. Steel mounting plates with
powder-coat finish. Black nylon glides.
367
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-C3 black data faceplate,
one RJ-11 communication jack
P7-C6 black data faceplate,
one RJ-45 data jack
P7-C3-C6 black data faceplate, one RJ-11
communication jack, one RJ-45 data jack
P7-C3-C6-C6 black data faceplate,
one RJ-11 communication jack,
two RJ-45 data jacks
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-C3 one RJ-11
Cat. 3 jack*
P7-C6 one RJ-45
Cat. 6 jack*
P7-C3-C6 one RJ-11
Cat. 3 jack,
one RJ-46
Cat.6 jack*
P7-C3-C6-C6 one RJ-11
Cat. 3 jack,
two RJ-45
Cat. 6 jack*
368
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-C3 $51.
P7-C6 83.
P7-C3-C6 120.
P7-C3-C6-C6 201.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
369
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-C6-C6 black data faceplate,
two RJ-45 data jacks
P7-C6-C6-C6 black data faceplate,
three RJ-45 data jacks
P7-C6-C6-C6-C6 black data faceplate,
four RJ-45 data jacks
P7-C3-C3-C6-C6 black data faceplate,
two RJ-11 communication jacks,
two RJ-45 data jacks
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-C6-C6 two RJ-45
Cat. 6 jack*
P7-C6-C6-C6 three RJ-45
Cat. 6 jack*
P7-C6-C6-C6-C6 four RJ-45
Cat. 6 jack*
P7-C3-C3-C6-C6 two RJ-11
Cat. 3 jack,
two RJ-45
Cat. 6 jack*
370
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-C6-C6 $158.
P7-C6-C6-C6 233.
P7-C6-C6-C6-C6 308.
P7-C3-C3-C6-C6 244.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
371
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

pattern no. list price
P7-C5-C5 $158.
P7-C5-C5-C5 233.
P7-C3I-C3I 73.
P7-LC-LC 345.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
373
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-LC-LC-C6-C6 black data faceplate,
two fiber optic connectors,
two RJ45 Cat. 6 jacks
P7-VGA-C6 black data faceplate,
one 15 pin HD VGA coupler,
one RJ-45 data jack
P7-VGA-C6-C6 black data faceplate,
one 15 pin HD VGA coupler,
two RJ-45 data jacks
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-LC-LC-C6-C6 two fiber optic
duplex
connectors,
two RJ45 Cat. 6
jacks
P7-VGA-C6 one 15 pin HD
VGA coupler,
one RJ-45
Cat. 6 jack*
P7-VGA-C6-C6 one 15 pin HD
VGA coupler,
two RJ-45
Cat. 6 jacks*
374
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-LC-LC-C6-C6 $495.
P7-VGA-C6 212.
P7-VGA-C6-C6 287.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
375
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-C3-C6 black data faceplate,
one 15 pin HD VGA coupler,
one RJ-11 communication jack,
one RJ-45 data jack
P7-VGA-MS-C3-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack, one RJ-11
communication jack, one RJ-45 data jack
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-C3-C6 one 15 pin HD
VGA coupler,
one RJ-11
Cat. 3 jack,
one RJ-45
Cat. 6 jack*
P7-VGA-MS-C3-
C6
376
one 15pin HD
VGA coupler,
one Mini-Stereo
jack,
one RJ-11
Cat. 3 jack,
one RJ-45
Cat. 6 jack*
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-C3-C6 $255.
P7-VGA-MS-C3-C6 269.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
377
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-MSI-C3-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler, one RJ-11
communication jack, one RJ-45 data jack
P7-VGA-MS-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack,
one RJ-45 data jack
P7-VGA-MSI-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler,
one RJ-45 data jack
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-MSI-C3-
C6
one 15 pin HD
VGA coupler,
one Mini-Stereo
in-line coupler,
one RJ-11
Cat. 3 jack,
one RJ-45
Cat. 6 jack*
P7-VGA-MS-C6 one 15 pin HD
VGA coupler,
one Mini-Stereo
jack,
one RJ-45
Cat. 6 jack*
P7-VGA-MSI-C6 one 15 pin HD
VGA coupler,
one Mini-Stereo
in-line coupler,
one RJ-45
Cat. 6 jack*
378
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-MSI-C3-C6 $305.
P7-VGA-MS-C6 226.
P7-VGA-MSI-C6 262.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
379
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-MS-C6-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack,
two RJ-45 data jacks
P7-VGA-MSI-C6-C6 black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler,
one RJ-45 data jack
P7-C3-C6-USB black data faceplate,
one RJ-11 communication jack,
one RJ-45 data jack,
one USB A/B in-line coupler
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-MS-C6-
C6
P7-VGA-MSI-C6-
C6
one 15 pin HD
VGA coupler,
one Mini-Stereo
jack,
two RJ-45
Cat. 6 jacks*
one 15 pin HD
VGA coupler,
one Mini-Stereo
in-line coupler,
two RJ-45
Cat. 6 jacks*
P7-C3-C6-USB one RJ-11
Cat. 3 jack,
one RJ-45
Cat. 6 jack,*
one USB A/B
in-line coupler
380
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-MS-C6-C6 $301.
P7-VGA-MSI-C6-C6 337.
P7-C3-C6-USB 244.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
381
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-MS black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack
P7-VGA-MSI black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler
P7-3X-3X black data faceplate,
two 3 pin XLR jacks
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-MS one 15 pin HD
VGA coupler,
one Mini-Stereo
jack*
P7-VGA-MSI one 15 pin HD
VGA coupler,
one Mini-Stereo
in-line coupler
P7-3X-3X two 3 pin
XLR jacks*
382
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-MS $151.
P7-VGA-MSI 187.
P7-3X-3X 314.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
383
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-3M-3M black data faceplate,
two 3 pin mini-XLR jacks
P7-3M-3M-3M black data faceplate,
three 3 pin mini-XLR jacks
P7-VGA-USB black data faceplate,
one 15 pin HD VGA coupler,
one USB A/B in-line coupler
P7-USB-USB black data faceplate,
two USB A/B in-line couplers
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-3M-3M two 3 pin
mini-XLR
jacks*
P7-3M-3M-3M three 3 pin
mini-XLR
jacks*
P7-VGA-USB one 15 pin HD
VGA coupler,
one USB A/B
in-line coupler
P7-USB-USB two USB A/B
in-line couplers
384
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-3M-3M $248.
P7-3M-3M-3M 368.
P7-VGA-USB 196.
P7-USB-USB 126.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
385
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-MS-RCA black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack,
one RCA (white, red and yellow) coupler
P7-VGA-MSI-RCA black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler,
one set RCA (white, red and yellow) couplers
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-MS-RCA one 15 pin HD
VGA coupler,
one Mini-Stereo
jack,*
one set RCA
couplers- one
left audio
(white),
one right audio
(red),
composite video
(yellow)
P7-VGA-MSI-RCA one 15 pin HD
VGA coupler,
one Mini-Stereo
coupler,
one set RCA
couplers- one
left audio
(white),
one right audio
(red),
compostite
video
(yellow)
386
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-MS-RCA $246.
P7-VGA-MSI-RCA 283.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
387
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-RCA black data faceplate,
one 15 pin HD VGA coupler,
one set RCA (white, red and yellow) couplers
P7-DVI-VGA black data faceplate,
one DVI coupler,
one 15 pin HD VGA coupler
P7-DVI black data faceplate,
one DVI coupler
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-VGA-RCA one 15 pin HD
VGA coupler,
one set RCA
couplers- one
left audio
(white),
one right audio
(red),
composite video
(yellow)
P7-DVI-VGA one DVI
in-line coupler,
one 15 pin HD
VGA coupler
P7-DVI one CVI
in-line coupler
388
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-RCA $232.
P7-DVI-VGA 383.
P7-DVI 254.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
389
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-DVI-MS-MS black data faceplate,
one DVI in-line coupler,
two mini stereo jacks
P7-DVI-MSI-MSI black data faceplate,
one DVI coupler,
two mini stereo in-line couplers
P7-HDMI black data faceplate,
one HDMI coupler
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-DVI-MS-MS one DVI
coupler,
two Mini-Stereo
jacks
P7-DVI-MSI-MSI one DVI
coupler,
two Mini-Stereo
couplers
P7-HDMI one HDMI
coupler,
female/female
390
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-DVI-MS-MS $282.
P7-DVI-MSI-MSI 355.
P7-HDMI 171.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
391
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-HDMI-VGA-MS black data faceplate,
one HDMI coupler,
one VGA coupler,
one mini stereo jack
P7-HDMI-VGA-MSI black data faceplate,
one HDMI coupler,
one VGA coupler,
one mini stereo in-line coupler
P7-VGA-MS-USB black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo jack,
one USB A/B in-line coupler
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-HDMI-VGA-MS one HDMI
coupler,
one VGA
coupler,
one Mini-Stereo
jack
P7-HDMI-VGA-
MSI
one HDMI
coupler,
one VGA
coupler,
one Mini-Stereo
in-line coupler,
female/female
P7-VGA-MS-USB one 15 pin HD
VGA coupler,
one Mini-Stereo
jack*,
one USB A/B
in-line coupler
392
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-HDMI-VGA-MS $314.
P7-HDMI-VGA-MSI 350.
P7-VGA-MS-USB 218.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
393
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-VGA-MSI-USB black data faceplate,
one 15 pin HD VGA coupler,
one Mini-Stereo coupler,
one USB A/B in-line coupler
P7-VGA-MSI-USB one 15 pin HD
VGA coupler,
one Mini-Stereo
coupler,
one USB A/B
in-line coupler
P7-RCA black data faceplate,
P7-RCA one set RCA
one set RCA (white, red and yellow) couplers
couplers- one
left audio
(white),
one right audio
(red),
composite video
(yellow)
P7-SV black data faceplate,
one S-Video coupler
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-SV one S-Video
(SVHS), in-line
coupler
394
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-VGA-MSI-USB $254.
P7-RCA 103.
P7-SV 170.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
395
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

Order Code
Example: P7-C3-C6-C6
P7 Black data faceplate
C3 RJ11 Cat. 3 jack
C6 RJ45 Cat. 6 jack
C6 RJ45 Cat. 6 jack
Specify: Faceplate with desired
communication or data jacks.
1. Faceplate
2. Communication/data jack
3. Communication/data jack
4. Communication/data jack
On-site wiring to be installed by
communications/data contractor.
Emanuela Frattini
Propeller� Electrical
Plexus Communication and Data Faceplates
description pattern no. accomodates w d h
P7-DVI-SV black data faceplate,
one DVI coupler,
one S-Video coupler
P7-X black data faceplate,
blank, no cut-outs
P7GR-X grey data faceplate,
blank, no cut-outs
P7-CM black data faceplate,
three cord minders
Finishes
Faceplate finishes:
Black (suffix P7)
Grey (suffix P7GR) $12, per plate
upcharge applies
Communication data options:
RJ-11 Category 3 jack (suffix C3) *
RJ-11 Category 3 inline coupler
(suffix C3I)
RJ-45 Category 5e inline coupler
(suffix C5E)
RJ-45 Category 6 jack (suffix C6) *
Fiberoptic (suffix LC)
Data cables are not supplied.
* requires on-site wiring
RJ-11 (Cat. 3) and RJ-45 (Cat. 6) jacks
require wires to be crimped to backs.
P7-DVI-SV one DVI
in-line coupler,
one S-Video
(SVHS) in-line
coupler
P7-X blank,
no cut-outs
P7GR-X blank,
no cut-outs
P7-CM three cord
minders
396
A/V and data options:
15 pin HD VGA coupler (suffix VGA)
Mini Stereo jack (suffix MS) *
Mini Stereo coupler (suffix MSI)
USB Z/B in XLR body (suffix USB)
RCA: white, red, yellow couplers
(suffix RCA)
S-Video, SVSH (suffix SV) *
DVI coupler (suffix DVI)
HDMI coupler (suffix HDMI)
3 pin XLR female (suffix 3X) *
3 pin mini XLR female (suffix 3M) *
Cord minders (suffix CM)
Blank plate (suffix X)
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
3.2� 1.9� .4�
Features
Communication, data jacks:
RJ-11 Telephone Connection:
RJ-11 Category 3 data jack, requires site
wiring and wires must be crimped to
back of jack. Configured for Siemons
cables. (suffix C3)
RJ-11 Category 3 inline coupler
female/female. Configured for Amp
cables. (suffix C3I)
RJ-45 Data Connection:
RJ-45 Category 5e in-line coupler
female/female. Configured for Amp
cables. (suffix C5E)
RJ-45 Category 6 data jack,requires site
wiring and cables must be crimped to
back of jack. Configured for Siemons
cables. (suffix C6)
Fiber Optic Data Connection:
Fiber optic LC connections, one full
duplex. (suffix LC)

pattern no. list price
P7-DVI-SV $416.
P7-X 8.
P7GR-X 20.
P7-CM 39.
A/V and data jacks:
DB Connection:
15 pin High density VGA female/female
coupler. (suffix VGA)
DVI Connection:
DVI in-line female/female coupler.
(suffix DVI)
RCA Connection:
White (left audio), Red (right audio) and
Yellow (composite video) female/female
coupler. (suffix RCA)
Stereo Connection:
Mini Stereo (3.5mm) jack, requires site
wiring (suffix MS). Mini Stereo (3.5mm)
female/female coupler (suffix MSI).
USB Connection:
USB A/B inline in XLR body. (suffix
USB)
Video Connection:
S-Video (SVHS) female/female coupler.
(suffix SV)
XLR Connection:
3 pin XLR jack, requires site wiring
(suffix 3X). 3 pin mini XLR jack,
requires site wiring (suffix 3M).
HDMI Connection:
HDMI in-line female/female coupler
(suffix HDMI).
A/V Cables are not included.
397
Construction
ABS fire retardant faceplate with integral
color. Fits shallow Plexus box openings.
KnollStudio

pattern no. page
1050C 124
1050C-1 124
1050C-2 124
1050C-3 124
1051C 122
1051C-S 120
1051C-ST 120
1052C 122
1052C-S 120
1053C 122
1053C-S 120
1059C 122
1059C-S 120
108 188
108-KC-111 188
1205-CO-S1 80
1205-CO-S2 80
1205-CO-S3 80
1205-C-S1 80
1205-C-S2 80
1205-C-S3 80
1250BUTTON 128
1250COVER 128
12A 128
12C 128
150AS 144
150AX 144
150K 144
151CS 144
151CX 144
151K 144
153YS 144
160TR 244
160TR-F2 244
161TO 248
161TO-F2 248
162TO 248
162TO-F2 248
162TR 246
162TR-F2 246
163TR 244
163TR-F2 244
164TR 240
164TR-F2 240
165TR 240
165TR-F2 240
169TR 244
169TR-F2 244
1715L-BRM 126
1715L-N 126
1719Y-BRM 126
1719Y-N 126
1725A-BRM 126
1725A-N 126
172TR 238
172TR-F2 238
173TR 238
173TR-F2 238
174TO 242
174TO-F2 242
175TO 242
Alpha-Numeric Index
pattern no. page
175TO-F2 242
176TR 238
176TR-F2 238
2160-C 62
2160R 64
2160RS 64
2160S-C 62
2161-C 62
2161P 62
2161S-C 62
2162P 64
2162R 64
2162RS 64
2163-C 62
2163R 64
2163RS 64
2163S-C 62
2165 66
23A 82
23AK-N 82
23C 82
23CH 82
23CK-N 82
23DOLLY 82
23GA 82
23TR24 228
23TR27 228
23TR36 228
23TR42 228
23TRH24 228
23TRH27 228
23TS24 228
23TS30 228
23TSH24 228
23TSH27 228
241LS 106
242LS 106
245A-C 100
245A-S 100
245AT-C 100
245AT-S 100
247LS 106
2480D 190
2481D 190
2482T 192
248LS 106
250LC 110
250LC-S 110
250LS 110
2510T 198
2510T( ) 198
2511T 198
2511T( ) 198
2515T 200
2515T( ) 200
2517T 200
2517T( ) 200
251YC 110
251YC-L80 110
251YC-S 110
251YS 110
398
pattern no. page
252 210
252C 210
252C-SFG 210
252-SFG 210
2530Y2C 80
2530Y3C 80
2541M 194
2542M 194
2543M 196
2544M 196
2545M 194
2546M 194
2547M 196
2548M 196
2549M 196
255A-C 102
255A-S 102
255C-C 102
255C-S 102
256AKIT-L 108
256AS-L 108
256CKIT-L 108
256CS-L 108
256LACE-L 108
257C 104
258LS 110
259TS-G 210
27A 90
27AGA 90
27C 88
27CGA 88
27DOLLY 88, 90
29C 118
29K 118
29TR-23-CC 224
29TR-23-DE 224
29TR-23-LM 224
29TR-27-DE 224
29TR-27-LM 224
29TR-35-DE 226
29TR-35-LM 226
29TR-39-DE 226
29TR-39-LM 226
29TR-43-DE 226
29TR-43-LM 226
29TR-47-DE 226
29TR-47-LM 226
29TR-H-23-CC 224
29TR-H-23-DE 224
29TR-H23-LM 224
29TS-27-DE 224
29TS-27-LM 224
29TS-35-DE 226
29TS-35-LM 226
3 146, 148
30C 58
30C2 58
30C2-A 58
30C3-A 58
30C-A 58
311-F1 222
KnollStudio
pattern no. page
311-F2 222
312-F1 222
312-F2 222
31C2-A 34
31C-A 34
31CK 34
3710T 230
3712T 232
3714T 232
3716T 230
37A 132
37A-U 134
37A-UP 134
37C 132
37CH 136
37CM 136
37CR 136
37C-U 134
37R 132
37R-T 132
38A 68
38AW-KC
38A-KC or
68
38AW-U 68
38AW-U-KC 68
38C 68
38C-KC or
38CW-KC 68
38CW-U 68
38CW-U-KC 68
38R 68
400K 48
400Y 48
41A 70
41A-KC or
41AW-KC 70
41AW-U 70
41AW-U-KC 70
41C 70
41C-KC or
41CW-KC 70
41CW-U 70
41CW-U-KC 70
41R 70
420C 36
420C-CO-K 36
420C-CO-KP 36
420C-CO-U 36
420F 36
420K 36
420KP 36
420P 36
421F 42
421FS 42
421K 42
421KS 42
421LCO-K 42
421LCO-U 42
421L-K 42
421LS-C-K 42
421LS-C-U 42
421L-U 42

pattern no. page
422F 42
422L-U 42
423F 44
423L-U 44
424F 44
424Y-U 44
427C 40
427C-CO-K 40
427C-CO-KP 40
427C-CO-U 40
427F 40
427K 40
427KP 40
427P 40
428C 38
428C-CO-K 38
428C-CO-KP 38
428C-CO-U 38
428F 38
428K 38
428KP 38
428P 38
429F 46
429K 46
429L 46
429L-K 46
429L-U 46
44A 132
44AU 134
44R 132
46A 92
46A-U 92
46C 92
46C-U 92
47TR15 216
47TR19 218
47TR22 218
47TR24 216
47TR26 216
47TR30 216
47TR50 216
47TR72 216
47TS15 214
47TS20 214
47TS31 214
47TS48 214
47TS64 214
48A 130
48R 130
4901 168
4901K-N 168
4901K-S 168
4902 170
4902K-N 170
4902K-S 170
49100D 168, 170
49TR-36 252
49TR-36-G2 252
49TR-36-G3 252
49TR-36-SN 252
49TR-42 252
49TR-42-G2 252
49TR-42-G3 252
49TR-42-SN 252
49TR-48 252
pattern no. page
49TR-48-G2 252
49TR-48-G3 252
49TR-48-SN 252
49TS-30 252
49TS-30-G2 252
49TS-30-G3 252
49TS-30-SN 252
49TS-36 252
49TS-36-G2 252
49TS-36-G3 252
49TS-36-SN 252
49TS-42 252
49TS-42-G2 252
49TS-42-G3 252
49TS-42-SN 252
4-C-LG-N 56
4-C-LG-S 56
4-C-SD-N 56
4-C-SD-S 56
4DOLLY 56
4GA 56
4LGSEAT 56
4SDSEAT 56
50A-5-B 52
50A-5-BE 52
50A-7 52
50AR-5-B 52
50AR-5-BE 52
50AR-7 52
50C-1-B 52
50C-1-BE 52
50C-2 52
50CR-1-B 52
50CR-1-BE 52
50CR-2 52
50CS 166
50KIT 166
50KIT-L 166
50L 54
50LACE 166
50T1 176
50T2 176
53D1 164
53S1 164
53S2 164
53S3 164
58A 60
58A-R 60
58C 60
58C-R 60
59Dolly 92
614TS-KC-KC 234
614TS-KE-D 234
614TS-LWT-LWT 234
618TR-KC-KC 234
618TR-KE-D 234
618TR-LWT-LWT 234
6242 180
6248 180
6254 180
6260 182
6272 182
6348 178
6354 178
6360 178
399
pattern no. page
642TR-KC-KC 234
642TR-KE-D 234
642TR-LWT-LWT 234
643TA-KC-KC 234
643TA-KE-D 234
643TA-LWT-LWT 234
643TAS-HB-HL 236
6472 184
6484 184
6496 184
654LA 142
654LC 142
654L-KIT 142
666C 138
666C-KIT 138
666CS-HB 140
666CS-KIT 140
666CS-WB-HB 140
666CS-WB-KIT 140
666C-WB 138
666C-WB-KIT 138
667Y 138
667Y-KIT 138
667YS-HB 140
667YS-KIT 140
66S1-M 158
66S1-Y 158
66S2-M 158
66S2-Y 158
66S3-M 158
66S3-Y 158
66SC-N 160
66SC-W 160
66SH-A 160
66SH-B 160
66SH-C 160
66SH-D 160
66SH-E 160
66SH-F 160
66SH-G 160
67 86
67R 86
67S 86
68 86
68C 86
68R 86
69 86
69R 86
70L 150
70LM 150
70LS 150
71A-C 146
71A-C-LT 146
71A-T5G 146
71A-W 146
72C-C 148
72C-T5G-H 148
72C-W 148
73 86
73R 86
74Y 150
74YM 150
751 112
751LT 112
752 112
KnollStudio
pattern no. page
752LT 112
753 112
753LT 112
754 112
754LT 112
755 114
755LT 114
756 114
756LT 114
759 212
760 212
78 98
78CH 98
78CM 98
80D 174
83ANCHOR 84
83Y-K 84
83YM 84
83YMW 84
84Y-K 84
84YM 84
84YMW 84
85T42M 84
87A 94
87AS 96
87C 94
87CH 96
87C-K-N 94
87C-K-S 94
87CM 96
87CS 96
87Dolly 94
87DOLLY 98
87-F1 222
87-F2 222
87GA 94
87TABLET 94
91A-GC 72
91A-GC-K 72
91C-GC 72
91C-GC-K 72
91K 72
92C-GC 72
92C-GC-K 72
92K 72
93A-GC 74
93A-GC-K 74
93K 74
94K 74
94L-GC 74
94L-GC-K 74
94LY-GC 74
94LY-GC-K 74
94YK 74
95T-36-G2-GC 186
95T-36-W-GC 186
95T-40-G2-GC 186
95T-40-W-GC 186
C [62xx] 182
C [63xx] 178, 184
CB1-C 50
CB1-L 50
CB2-C 50
CB2-L 50
CB3 50

pattern no. page
CBP1 50
CBP2 50
CX 178, 182, 184
G 100, 102, 168
G [4902] 170
GL 178, 182, 184
H 120
JL1-P 76
JL1-PLT 76
JL1-W 78
JL1-WLT 78
JL2-P 76
JL2-PLT 76
JL2-W 78
JL2-WLT 78
JL3-P 76
JL3-PLT 76
JL3-W 78
JL3-WLT 78
KSP1 172
KSP1S 172
KSP2 172
KSP2S 172
KSP3 172
KSP3S 172
L 92
N10 220
N19-AW 116
N20-DF 220
P 100, 102
P2-A26 264
P2-A29 264
P2-A36 264
P2-B26 258
P2-B36 258
P2-C02 264
P2-C04 264
P2-C06 264
P2-C10 264
P2-C12 264
P2-C14 264
P2-C16 264
P2-C-2 340
P2-C21 264
P2-C22 264
P2-C23 264
P2-C24 264
P2-C25 264
P2-C26 264
P2-C27 264
P2-C28 264
P2-C29 264
P2-C32 264
P2-C34 264
P2-C36 264
P2-CASTER4 340
P2-D14 260
P2-D16 260
P2-D24 260
P2-D25 260
P2-D26 260
P2-D34 260
P2-D36 260
P2-DOLLY24 272
P2-DOLLY26 272
pattern no. page
P2-DOLLY34 272
P2-DOLLY36 272
P2-DOLLY-H 272
P2-E26 260
P2-E36 260
P2-F14 272
P2-F16 272
P2-F24 272
P2-F25 272
P2-F26 272
P2-F34 272
P2-F36 272
P2FT4811 332
P2FT4813 332
P2FT4818 332
P2FT6011 332
P2FT6013 332
P2FT6018 332
P2FT7211 332
P2FT7213 332
P2FT7218 332
P2-FT-BKT-MP 332
P2-G26 266
P2-G29 266
P2-G36 266
P2-GLIDE4 340
P2-H12 274
P2-H14 274
P2-H16 274
P2-H22 274
P2-H24 274
P2-H26 274
P2-H32 274
P2-H34 274
P2-H36 274
P2-I02 266
P2-I04 266
P2-I06 266
P2-I10 266
P2-I14 266
P2-I16 266
P2-I23 266
P2-I24 266
P2-I25 266
P2-I26 266
P2-I27 266
P2-I28 266
P2-I29 266
P2-I34 266
P2-I36 266
P2-J02 266
P2-J04 266
P2-J12 266
P2-J14 266
P2-J21 266
P2-J22 266
P2-J23 266
P2-J24 266
P2-J27 266
P2-J32 266
P2-J34 266
P2-K12 274
P2-K14 274
P2-K16 274
P2-K22 274
400
pattern no. page
P2-K24 274
P2-K26 274
P2-K32 274
P2-K34 274
P2-K36 274
P2-L02 260
P2-L04 260
P2-L10 260
P2-L12 260
P2-L14 260
P2-L16 260
P2-L21 260
P2-L22 260
P2-L24 260
P2-L25 260
P2-L26 260
P2-L32 260
P2-L34 260
P2-L36 260
P2-M10 262
P2-M20 262
P2-M30 262
P2-N30 258
P2-N41 258
P2-N52 258
P2-R02 258
P2-R04 258
P2-R06 258
P2-R10 258
P2-R12 258
P2-R14 258
P2-R16 258
P2-R21 258
P2-R22 258
P2-R24 258
P2-R25 258
P2-R26 258
P2-R32 258
P2-R34 258
P2-R36 258
P2-RLEG2KIT 340
P2-RLEG4KIT 340
P2-S120 256
P2-S126 256
P2-S30 256
P2-S36 256
P2-S62 262
P2-S64 262
P2-S66 262
P2-S92 262
P2-S94 262
P2-S96 262
P2-SC2411 326
P2-SC2413 326
P2-SC2418 326
P2-SC3011 326
P2-SC3013 326
P2-SC3018 326
P2-SC3611 326
P2-SC3613 326
P2-SC3618 326
P2-SC4211 326
P2-SC4213 326
P2-SC4218 326
P2-SC4811 326
KnollStudio
pattern no. page
P2-SC4813 326
P2-SC4818 326
P2-SC6011 326
P2-SC6013 326
P2-SC6018 326
P2-SC6611 326
P2-SC6613 326
P2-SC6618 326
P2-SC7211 326
P2-SC7213 326
P2-SC7218 326
P2-SC-BKT-MP 330
P2-SC-BKT-PS 330
P2-SC-BKT-PSD 330
P2-SC-BKT-PSE 330
P2-SC-BKT-PST 330
P2SCT2411 328
P2SCT2413 328
P2SCT2418 328
P2SCT3011 328
P2SCT3013 328
P2SCT3018 328
P2SCT3611 328
P2SCT3613 328
P2SCT3618 328
P2SCT4211 328
P2SCT4213 328
P2SCT4218 328
P2SCT4811 328
P2SCT4813 328
P2SCT4818 328
P2SCT6011 328
P2SCT6013 328
P2SCT6018 328
P2SCT6611 328
P2SCT6613 328
P2SCT6618 328
P2SCT7211 328
P2SCT7213 328
P2SCT7218 328
P2-SH24 334
P2-SH30 334
P2-SH36 334
P2-SH42 334
P2-SH48 334
P2-SH60 334
P2-SH66 334
P2-SH72 334
P2-SHLB24 334
P2-SHLB30 334
P2-SHLB36 334
P2-SHLB42 334
P2-SHLB48 334
P2-SHLB60 334
P2-SHLB66 334
P2-SHLB72 334
P2-SHS 334
P2-SHSD 334
P2-T60 256
P2-T72 256
P2-TCLEG2 340
P2-TCLEG218 340
P2-TLEG2 340
P2-TLEG4 340
P2-TTLEG2 340

pattern no. page
P2-TTLEG30 340
P2-U60 256
P2-U72 256
P2-V02 262
P2-V04 262
P2-V10 262
P2-V12 262
P2-V14 262
P2-V21 262
P2-V22 262
P2-V24 262
P2-V32 262
P2-V34 262
P2-X30 276
P2-X36 276
P2-X42 276
P2-X48 276
P2-Y30 276
P2-Y36 276
P2-Y42 276
P2-Y48 276
P3-AL42 286
P3-AL44 286
P3-AL46 286
P3-AL48 286
P3-AL50 286
P3-AL52 286
P3-AL54 286
P3-AL56 286
P3-AL62 286
P3-AL64 286
P3-AL66 286
P3-AL68 286
P3-AL70 286
P3-AL72 286
P3-AL74 286
P3-AL76 286
P3-AL82 286
P3-AL84 286
P3-AL86 286
P3-AL88 286
P3-AL90 286
P3-AL92 286
P3-AL94 286
P3-AL96 286
P3-BD62 306
P3-BD64 306
P3-BD82 306
P3-BD84 306
P3-BD86 306
P3-BL42 284
P3-BL44 284
P3-BL46 284
P3-BL48 284
P3-BL50 284
P3-BL52 284
P3-BL54 284
P3-BL56 284
P3-BL62 284
P3-BL64 284
P3-BL66 284
P3-BL68 284
P3-BL70 284
P3-BL72 284
P3-BL74 284
pattern no. page
P3-BL76 284
P3-BL82 284
P3-BL84 284
P3-BL86 284
P3-BL88 284
P3-BL90 284
P3-BL92 284
P3-BL94 284
P3-BL96 284
P3-BP50 314
P3-BP52 314
P3-BP54 314
P3-BP56 314
P3-BP70 314
P3-BP72 314
P3-BP74 314
P3-BP76 314
P3-BP96 314
P3-CD30 308
P3-CD32 308
P3-CD34 308
P3-CD36 308
P3-CD38 308
P3-CD40 308
P3-CD50 308
P3-CD52 308
P3-CD54 308
P3-CD56 308
P3-CD58 308
P3-CD60 308
P3-CL10 292
P3-CL12 292
P3-CL14 292
P3-CL16 292
P3-CL18 292
P3-CL20 292
P3-CL22 292
P3-CL30 292
P3-CL32 292
P3-CL34 292
P3-CL36 292
P3-CL38 292
P3-CL40 292
P3-CL42 292
P3-CL50 292
P3-CL52 292
P3-CL54 292
P3-CL56 292
P3-CL58 292
P3-CL60 292
P3-CL62 292
P3-CLEG-C 340
P3-CLEG-F 340
P3-CLEG-PE 366
P3-CLEG-PR 364
P3-CP10 316
P3-CP12 316
P3-CP14 316
P3-CP16 316
P3-CP18 316
P3-CP20 316
P3-CP22 316
P3-CP30 316
P3-CP32 316
P3-CP34 316
401
pattern no. page
P3-CP36 316
P3-CP38 316
P3-CP40 316
P3-CP42 316
P3-CP50 316
P3-CP52 316
P3-CP54 316
P3-CP56 316
P3-CP58 316
P3-CP60 316
P3-CP62 316
P3-DBASEL 342
P3-DBASEL-W 342
P3-DBASEM 342
P3-DBASEM-W 342
P3-DBASES 342
P3-DBASES-W 342
P3-DD48 306
P3-DD54 306
P3-DD60 306
P3-DL48 280
P3-DL54 280
P3-DL60 280
P3-ED30 310
P3-ED32 310
P3-ED34 310
P3-ED36 310
P3-ED38 310
P3-ED40 310
P3-ED50 310
P3-ED52 310
P3-ED54 310
P3-ED56 310
P3-ED58 310
P3-ED60 310
P3-EL10 296
P3-EL12 296
P3-EL14 296
P3-EL16 296
P3-EL18 296
P3-EL20 296
P3-EL30 296
P3-EL32 296
P3-EL34 296
P3-EL36 296
P3-EL38 296
P3-EL40 296
P3-EL50 296
P3-EL52 296
P3-EL54 296
P3-EL56 296
P3-EL58 296
P3-EL60 296
P3-EP10 318
P3-EP12 318
P3-EP14 318
P3-EP16 318
P3-EP18 318
P3-EP20 318
P3-EP30 318
P3-EP32 318
P3-EP34 318
P3-EP36 318
P3-EP38 320
P3-EP40 320
KnollStudio
pattern no. page
P3-EP50 318
P3-EP52 318
P3-EP54 318
P3-EP56 320
P3-EP58 320
P3-EP60 320
P3-FD26 308
P3-FD30 308
P3-FD32 308
P3-FD34 308
P3-FD36 308
P3-FD38 308
P3-FD46 308
P3-FD50 308
P3-FD52 308
P3-FD54 308
P3-FD56 308
P3-FD58 308
P3-FL06 294
P3-FL10 294
P3-FL12 294
P3-FL14 294
P3-FL16 294
P3-FL18 294
P3-FL26 294
P3-FL30 294
P3-FL32 294
P3-FL34 294
P3-FL36 294
P3-FL38 294
P3-FL46 294
P3-FL50 294
P3-FL52 294
P3-FL54 294
P3-FL56 294
P3-FL58 294
P3-FP06 316
P3-FP10 316
P3-FP12 316
P3-FP14 316
P3-FP16 316
P3-FP18 318
P3-FP26 318
P3-FP30 318
P3-FP32 318
P3-FP34 318
P3-FP36 318
P3-FP38 318
P3-FP46 318
P3-FP50 318
P3-FP52 318
P3-FP54 318
P3-FP56 318
P3-FP58 318
P3-HL40 290
P3-HL42 290
P3-HL44 290
P3-HL46 290
P3-HL48 290
P3-HL50 290
P3-HL52 290
P3-HL54 290
P3-HL56 290
P3-HL62 290
P3-HL64 290

pattern no. page
P3-HL66 290
P3-HL68 290
P3-HL70 290
P3-HL72 290
P3-HL74 290
P3-HL76 290
P3-HL80 290
P3-HL82 290
P3-HL86 290
P3-HL88 290
P3-HL90 290
P3-HL92 290
P3-HL94 290
P3-HL96 290
P3-IL44 282
P3-IL46 282
P3-IL48 282
P3-IL50 282
P3-IL52 282
P3-IL54 282
P3-IL56 282
P3-IL64 282
P3-IL66 282
P3-IL68 282
P3-IL70 282
P3-IL72 282
P3-IL74 282
P3-IL76 282
P3-IL88 282
P3-IL90 282
P3-IL92 282
P3-IL94 282
P3-IL96 282
P3-J30 276
P3-J36 276
P3-J42 276
P3-J48 276
P3-KNOB8 340
P3-L30 276
P3-L36 276
P3-L42 276
P3-L48 276
P3-MD48 306
P3-MD54 306
P3-MD60 306
P3-ML42 280
P3-ML48 280
P3-ML54 280
P3-ML60 280
P3-ND64 306
P3-NL44 280
P3-NL46 280
P3-NL48 280
P3-NL50 280
P3-NL52 280
P3-NL54 280
P3-NL56 280
P3-NL64 280
P3-NL66 280
P3-NL68 280
P3-NL70 280
P3-NL72 280
P3-NL74 280
P3-NL76 280
P3-NL88 280
pattern no. page
P3-NL90 280
P3-NL92 280
P3-NL94 280
P3-NL96 280
P3-NP50 314
P3-NP52 314
P3-NP54 314
P3-NP56 314
P3-NP70 314
P3-NP72 314
P3-NP74 314
P3-NP76 314
P3-NP96 314
P3-PBASE 342
P3-PBASE-W 342
P3-RD62 306
P3-RD64 306
P3-RD80 306
P3-RD82 306
P3-RL40 288
P3-RL42 288
P3-RL44 288
P3-RL46 288
P3-RL48 288
P3-RL50 288
P3-RL52 288
P3-RL54 288
P3-RL56 288
P3-RL62 288
P3-RL64 288
P3-RL66 288
P3-RL68 288
P3-RL70 288
P3-RL72 288
P3-RL74 288
P3-RL76 288
P3-RL80 288
P3-RL82 288
P3-RL86 288
P3-RL88 288
P3-RL90 288
P3-RL92 288
P3-RL94 288
P3-RL96 288
P3-RP50 314
P3-RP52 314
P3-RP54 314
P3-RP56 314
P3-RP70 314
P3-RP72 314
P3-RP74 314
P3-RP76 314
P3-RP96 314
P3-SD30 312
P3-SD32 312
P3-SD34 312
P3-SD36 312
P3-SD48 306
P3-SD50 312
P3-SD52 312
P3-SD53 312
P3-SD54 306
P3-SD56 312
P3-SD60 306
P3-SL10 298
402
pattern no. page
P3-SL12 298
P3-SL14 298
P3-SL16 298
P3-SL30 298
P3-SL32 298
P3-SL34 298
P3-SL36 298
P3-SL42 288
P3-SL48 288
P3-SL50 298
P3-SL52 298
P3-SL53 298
P3-SL54 288
P3-SL56 298
P3-SL60 288
P3-SP10 322
P3-SP12 322
P3-SP14 322
P3-SP16 322
P3-SP30 322
P3-SP32 322
P3-SP34 322
P3-SP36 322
P3-SP50 322
P3-SP52 322
P3-SP54 322
P3-SP56 322
P3-TD30 312
P3-TD32 312
P3-TD34 312
P3-TD36 312
P3-TD38 312
P3-TD40 312
P3-TD50 312
P3-TD52 312
P3-TD54 312
P3-TD56 312
P3-TD58 312
P3-TD60 312
P3-TL10 300
P3-TL12 300
P3-TL14 300
P3-TL16 300
P3-TL18 300
P3-TL20 300
P3-TL30 300
P3-TL32 300
P3-TL34 300
P3-TL36 300
P3-TL38 300
P3-TL40 300
P3-TL50 300
P3-TL52 300
P3-TL54 300
P3-TL56 300
P3-TL58 300
P3-TL60 300
P3-TLEGU-PE 366
P3-TLEGU-PE30 366
P3-TLEGU-PR 364
P3-TLEGU-PR30 364
P3-TP10 322
P3-TP12 322
P3-TP14 322
P3-TP16 322
KnollStudio
pattern no. page
P3-TP18 322
P3-TP20 322
P3-TP30 322
P3-TP32 322
P3-TP34 322
P3-TP36 322
P3-TP38 322
P3-TP40 322
P3-TP50 322
P3-TP52 322
P3-TP54 322
P3-TP56 322
P3-TP58 322
P3-TP60 322
P3-VD30 312
P3-VD32 312
P3-VD34 312
P3-VD36 312
P3-VD38 312
P3-VD40 312
P3-VD50 312
P3-VD52 312
P3-VD54 312
P3-VD56 312
P3-VD58 312
P3-VD60 312
P3-VL10 302
P3-VL12 302
P3-VL14 302
P3-VL16 302
P3-VL18 302
P3-VL20 302
P3-VL30 302
P3-VL32 302
P3-VL34 302
P3-VL36 302
P3-VL38 302
P3-VL40 302
P3-VL50 302
P3-VL52 302
P3-VL54 302
P3-VL56 302
P3-VL58 302
P3-VL60 302
P3-VP10 324
P3-VP12 324
P3-VP14 324
P3-VP16 324
P3-VP18 324
P3-VP20 324
P3-VP30 324
P3-VP32 324
P3-VP34 324
P3-VP36 324
P3-VP38 324
P3-VP40 324
P3-VP50 324
P3-VP52 324
P3-VP54 324
P3-VP56 324
P3-VP58 324
P3-VP60 324
P4-AMP1145A 360
P4-AMP1145B 360
P4-AMP-2A 360

pattern no. page
P4-AMP-2B 360
P4-AWB20 354
P4-AWB26 354
P4-AWB32 354
P4-AWB36 354
P4-AWB42 354
P4-EASEL-P 336
P4-GR 354
P4-MRI 354
P4-PDC-12 360
P4-PDC-21 360
P4-PDC-22 360
P4-PDC-24 360
P4-PP 354
P4-PT11 354
P4-PT45 354
P4-PT4511 354
P4-RW-C2 340
P4-RWDA 360
P4-RWDB 360
P4-RWDOX 360
P4-RWDOY 360
P4-RWDX 360
P4-RWDY 360
P4-RWIN4-CL 364
P4-RWIN4-CLE 366
P4-RWIN4-CR 364
P4-RWIN4-CRE 366
P4-RWIN4-REL 366
P4-RWIN4-RER 366
P4-RWIN4-RL 364
P4-RWIN4-RR 364
P4-RWIN4-T 364
P4-RWIN4-TE 366
P4-RWJ10 362
P4-RWJ17 362
P4-RWJ27 362
P4-RWJ37 362
P4-RWJ47 362
P4-RWJ57 362
P4-RWJ67 362
P4-RWM30 362
P4-RWM96 362
P4-RWMFJ10 362
P4-RWMFJ17 362
P4-RWMFJ27 362
P4-RWMFJ37 362
P4-RWR48 360
P4-RWR60 360
P4-RWR66 360
P4-RWR72 360
P4-RWT 360
P4S-BOXJ-E 350
P4S-BOXJ-PRA 352
P4S-BOXJ-PRB 352
P4S-BOXM-E 350
P4S-BOXM-PP-11 346
P4S-BOXM-PP-4511 346
P4S-BOXM-PP-5 346
P4S-BOXM-PRA 352
P4S-BOXM-PRB 352
P4S-BOXS-PP-2 346
P4S-BOXS-PP-X 346
P4SD-BOXM-E 350
P4SD-BOXM-PP-11 348
pattern no. page
P4SD-BOXM-PP-4511 348
P4SD-BOXM-PP-5 348
P4SD-BOXM-PRA 352
P4SD-BOXM-PRB 352
P4SE45 356
P4SE45-S1-BLK 356
P4SE45-S1-SLV 356
P4SEC45-BLK 356
P4SEC45-SLV 356
P4SECDA-BLK 356
P4SECDA-SLV 356
P4SEDA 356
P4SEDA-S1-BLK 356
P4SEDA-S1-SLV 356
P4-TR1 336
P4-TR2 336
P4-TR2-LB2 336
P4-TT11 354
P4-TT45 354
P4-WM4 342
P4-WMT-18 354
P4-WMT-32 354
P4-WMT-44 354
P4-WMT-56 354
P4-WMT-96 354
P5-01 338
P5-02 338
P5-11 338
P5-12 338
P5-13 338
P5-14 338
P5-15 338
P5-21 338
P5-22 338
P5-23 338
P5-24 338
P5-25 338
P5-26 338
P5-27 338
P5-28 338
P5-29 338
P5-C 338
P5-D 338
P6-C02 268
P6-C04 268
P6-C06 268
P6-C12 268
P6-C14 268
P6-C16 268
P6-C22 268
P6-C24 268
P6-C26 268
P6-C32 268
P6-C34 268
P6-C36 268
P6-X30 268
P6-X36 268
P6-X42 268
P6-Y36 268
P6-Y42 268
P7-3M-3M 384
P7-3M-3M-3M 384
P7-3X-3X 382
P7-C3 368
P7-C3-C3-C6-C6 370
403
pattern no. page
P7-C3-C6 368
P7-C3-C6-C6 368
P7-C3-C6-USB 380
P7-C3I-C3I 372
P7-C5-C5 372
P7-C5-C5-C5 372
P7-C6 368
P7-C6-C6 370
P7-C6-C6-C6 370
P7-C6-C6-C6-C6 370
P7-CM 396
P7-DVI 388
P7-DVI-MSI-MSI 390
P7-DVI-MS-MS 390
P7-DVI-SV 396
P7-DVI-VGA 388
P7GR-X 396
P7-HDMI 390
P7-HDMI-VGA-MS 392
P7-HDMI-VGA-MSI 392
P7-LC-LC 372
P7-LC-LC-C6-C6 374
P7-RCA 394
P7-SV 394
P7-USB-USB 384
P7-VGA-C3-C6 376
P7-VGA-C6 374
P7-VGA-C6-C6 374
P7-VGA-MS 382
P7-VGA-MS-C3-C6 376
P7-VGA-MS-C6 378
P7-VGA-MS-C6-C6 380
P7-VGA-MSI 382
P7-VGA-MSI-C3-C6 378
P7-VGA-MSI-C6 378
P7-VGA-MSI-C6-C6 380
P7-VGA-MSI-RCA 386
P7-VGA-MSI-USB 394
P7-VGA-MS-RCA 386
P7-VGA-MS-USB 392
P7-VGA-RCA 388
P7-VGA-USB 384
P7-X 396
P8-CE12 270
P8-CE14 270
P8-CE16 270
P8-CE22 270
P8-CE24 270
P8-CE26 270
P8-CM12 270
P8-CM14 270
P8-CM16 270
P8-CM22 270
P8-CM24 270
P8-CM26 270
R 128, 146, 148
RL1 202
RL11-17 206
RL1-118 202
RL11-22 206
RL2 202
RL2-118 202
RL3-SFG-MTC 202
RL5L-54 204
RL5L-54-118 204
KnollStudio
pattern no. page
RL5L-60 204
RL5L-60-118 204
RL5M-42 204
RL5M-42-118 204
RL5M-48 204
RL5M-48-118 204
RL7M 208
RL9L 208
RL9L-118 208
RL9S 208
RL9S-118 208
SM1-1 154
SM1-2 154
SM1-3 154
SM2-1 156
SM2-2 156
SM2-3 156
SM2S-1 156
SM2S-2 156
SM2S-3 156
SM8A 152
SM8A-U 152
SM8R 152
SM9 250
SM91 250
SM92 250
SM93 250
T 132
TR 88
upchg, welt 76, 78, 112, 114, 146
upchg,
cushions 62, 64, 156
W 258, 260, 262, 280, 284, 288, 292, 294,
296, 298, 300, 302

Selling Policy
This
......................................................................................................................................
Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.
Terms & Conditions Sales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are
of Sales made only on the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and
conditions. This sale is expressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may
apply to KnollStudio and KnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an
authorized representative of Seller. These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between
Purchaser and Seller. Written quotations expire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that
period. Where Purchaser and Seller have entered into the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other
business communications placed or transmitted in accordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed
and
......................................................................................................................................
shall be valid for all purposes as if they were originated and maintained in documentary form.
Ordering Information All
......................................................................................................................................
orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.
Order Confirmation A
......................................................................................................................................
purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.
Pricing Policies List prices are subject to change without notice.
List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after
order entry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no
other
......................................................................................................................................
charges are included in Seller’s list prices.
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,
Purchaser
......................................................................................................................................
shall submit to Seller the appropriate exemption certificates.
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is issued upon shipment. In
case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deducted
and the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due
within thirty (30) days of the date of invoice.
KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and
charges for inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit
is due at time of order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior
to shipment.
If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in
advance.
Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added
to the outstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s
fees
......................................................................................................................................
and costs.
Changes and Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expenses
Cancellation incurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation charges
established by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery
programs,
......................................................................................................................................
may not be canceled.
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc.
and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is
tested for rigorous motion and transportation but is not guaranteed to protect furniture from conditions over which the Seller has no control. If special
packaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipment and routing.All
shipments
......................................................................................................................................
shall be tailgate deliveries. Freight for all KnollTextiles orders is prepaid and added to the invoice.
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.
For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including any
handling and transportation charges incidental to loading at the point of departure and unloading at the final destination.
Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not be
responsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.
Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special
services in excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle
and extra, export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.
Partial
......................................................................................................................................
shipments may be made and invoiced by Seller.
Claims All shipments for all Knoll Products within the contiguous United States and Canada are F.O.B. Origin. Risk of loss passes to Purchaser at time of delivery
to carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are,
or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to make a claim against carrier or notify Seller during the
ten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. Seller will agree to repair
or replace Product damaged in shipment if Purchaser has notified Seller of freight damage within ten (10) working days after receipt and assigns its rights
against
......................................................................................................................................
the carrier.
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including
but
......................................................................................................................................
not limited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer
Service. All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products
not currently offered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and
in
......................................................................................................................................
the original Seller packing cartons. No refund or credit shall be given for damaged Products.
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests
a delay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the
order is ready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including
demurrage, preparation for storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the
Product shall pass to the Purchaser upon delivery of the Product into storage.
January 1, 2010
404

Selling Policy
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested
material to Seller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any
requirements of Underwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a
description of the procedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no
responsibility for the appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify
and hold Seller harmless for any damages, injuries or losses arising out of or related to use of the COM on the Product.
......................................................................................................................................
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and
materials, during the applicable warranty period set forth below.
Warranty period set forth below is for 24-hour, 7 days a week, multi shift use.
Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment,
Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.
Product and Period of Warranty
Lifetime: AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Equity, Morrison, Reff laminate, Series 2 Storage, Template, Antenna
Workspaces and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 Veneer Front
Storage, special or custom products, see below)
10 Years: AutoStrada, Crinion Open Table, Reff wood components, Series 2 Veneer Front Storage, Antenna Workspaces wood components, Wood Casegoods
(Magnusson, The Graham Collection) (except wood casegoods upholstered surfaces, see below), Interaction tables (except height adjustment mechanisms
for Counterforce, crank-adjustable, and split-top tables and worksurfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor
Arm Collection, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, see below), Smokador collection
(except leathers, see below), and Orchestra Universal Systems Accessories, Bulldog, Chadwick, Essentials Work Chairs, Generation by Knoll work chair,
Life, Moment, RPM and Sapper seating structural and operational parts, controls, casters, pneumatic cylinders, seat and back suspension material (except
seating upholstery, textiles and leathers, finishes and labor, see below). Labor to repair Generation by Knoll work chair.
5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), cascade edge worksurfaces, special or
custom product, wood veneer products, Currents handcrank, Interaction Counterforce, Interaction crank-adjustable, and split-top mechanisms,
KnollStudio, KnollExtra Wishbone and Zorro monitor supports, CPU storage and all universal storage drawers, Spark Series seating structural parts,
(except seating upholstery, textiles, finishes and labor, see below).
3 Years: Bulldog, Chadwick, Essentials Work Chairs, Life, Moment, RPM, Sapper seating upholstery, textiles and leathers, finishes and labor to repair,
Generation by Knoll work chair seating uphostery, textiles and leathers, and finishes, Spark Series seating uphostery and textiles. Fabric boards textiles
and Smokador Collection leathers.
2 Years: All other KnollExtra product
1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, Spark Series seating finishes and labor to repair, wood
casegoods upholstered surfaces.
This warranty does not apply to:
• Damage caused by a carrier other than the Seller.
• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).
• COM or other third party materials applied to Products.
• Products not installed by or under the auspices of a Knoll Dealer.
• Dramatic temperature variations or exposure to unusual conditions.
• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles (consult current KnollTextiles price list for applicable warranty).
Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching
of the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.
THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM
COURSE OF DEALING OR USAGE OF TRADE.
The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of its
Products. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller,
with respect to or arising out of the Product furnished hereunder.
......................................................................................................................................
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of any
governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,
materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its
reasonable control. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate
available Product or cancel any purchase order.
......................................................................................................................................
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,
REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.
......................................................................................................................................
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the
Purchaser, and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder
constitutes a direct or a contributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if
Purchaser shall have made all payments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance
for the defense of said claim, suit or proceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.
The foregoing indemnity does not apply to the following:
• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.
• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.
• Any settlements of a suit or proceeding made without Seller’s written consent.
......................................................................................................................................
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BE
LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A
BREACH OF THIS AGREEMENT.
Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into
between the parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
January 1, 2010
405

General Ordering Information
The Products
This guide encompasses all standard products for this product group.
Sizes
Dimensions listed in this guide are indicated as:
H = height
W = width
D = depth
Dia. = diameter
Rad. = radius
Pricing
All prices shown are list.
How to Order
Select pattern numbers and quantities required for your complete installation. Product questions can be
addressed in the specific sections of this guide or by contacting your sales representative or customer
resource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference the
Finishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization and
handling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors and
area identifications are completely specified. Also, include complete purchase order numbers, bill-to and
ship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:
Knoll, Inc.
1235 Water Street
P.O. Box 157
East Greenville, PA 18041
Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of your
scheduled shipping date within five days of the original acknowledgment. If it is necessary to revise your
order, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to social
responsibility and a healthy environment has prompted us to further articulate our longstanding
environmental programs and, with encouragement and support from our colleagues in the industry, we have
re-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED certification. Knoll is
proud to have contributed to projects that have received LEED certification from the U.S. Green Building
Council.
For the latest information on Knoll products that help our customers achieve LEED certification, log on to
knoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
406