CHAPTER 22 MODELING AND UNDERSTANDING BLEVEs

22.26 CHAPTER TWENTY-TWO
22.8 REFERENCES
� Radiation coefficient (�)
� Density (kg � m�3 )
�l Liquid density (kg � m�3 )
�v Vapor density (kg � m�3 )
Appleyard, R. D. 1980. Testing and Evaluation of the Explosafe System as a Method of Controlling the
BLEVE, Report TP2740, Transportation Development Centre, Montreal.
Armet, L. 1997. Private communication.
American Society of Testing and Materials (ASTM). 1983. ‘‘A Guide to the Safe Handling of Hazardous
Materials Accidents,’’ ASTM STP 825, ASTM, Philadelphia.
Bagster, D. F., and R. M. Pitblado. 1989. ‘‘Thermal Hazards in the Process Industry,’’ Chemical Engineering
Progress, vol. 85, pp. 69–75.
Baum, M. R. 1992. ‘‘Development of the Breach Generated by Axial Rupture of a Gas-Pressurized Steel
Pipe,’’ Journal of Pressure Vessel Technology, Transactions of the ASME, vol. 104, pp. 253–261.
Baum, M. R. 1988. ‘‘Disruptive Failure of Pressure Vessels: Preliminary Design Guidelines for Fragment
Velocity and the Extent of the Hazard Zone,’’ Journal of Pressure Vessel Technology, Transactions of
the ASME, vol. 110, pp. 168–176.
Baum, M. R. 1999. ‘‘Failure of a Horizontal Pressure Vessel Containing a High Temperature Liquid: the
Velocity of End-Cap and Rocket Missiles,’’ Journal of Loss Prevention in the Process Industries, vol.
12, pp. 137–145.
Bestratén, M., and E. Turmo. 1991a. ‘‘Explosiones BLEVE (I): Evaluación de la Radiaciñ Térmica,’’
Notas técnica de prevención NTP-293, Inst. Nac. Seg. Hig. Trab., Barcelona.
Bestratén, M., and E. Turmo. 1991b. ‘‘Explosiones BLEVE (II): Medidas Preventivas,’’ Notas técnica
de prevención NTP-294, Inst. Nac. Seg. Hig. Trab., Barcelona.
Birk, A. M. 1995. ‘‘Scale Effects with Fire Exposure of Pressure-Liquefied Gas Tanks,’’ Journal of Loss
Prevention in the Process Industries, vol. 8, pp. 275–290.
Birk, A. M. 1996. ‘‘Hazards from Propane BLEVEs: An Update and Proposal for Emergency Responders,’’
Journal of Loss Prevention in the Process Industries, vol. 9, pp. 173–181.
Birk, A. M., and M. H. Cunningham. 1996. ‘‘Liquid Temperature Stratification and Its Effects on BLE-
VEs and their Hazards,’’ Journal of Hazardous Materials, vol. 48, pp. 219–237.
Calpe, J., and J. Casal. 1989. ‘‘BLEVE-Bola de Foc. Estudi Comparatiu de Models de Predicció
d’Efectes,’’ in Proc. Conferència sobre seguretat ambiental, Reus, Spain, pp. 389–404.
Capdevila, J. 1994. Programa de càlcul per a l’estimació d’efectes i conseqüències de l’accident BLEVE/
bola de foc, Internal Report, CERTEC, Barcelona.
Casal, J., H. Montiel, E. Planas, and J. A. Vilchez. 1999. Análisis del Riesgo en Instalaciones Industriales,
Edicions UPC, Barcelona.
Center for Chemical Process Safety (CCPS). 1994. Guidelines for Evaluating the Characteristics of
Vapor Cloud Explosions, Flash Fires and BLEVEs, AIChE, New York.
Fay, J. A., and D. H. Lewis. 1977. ‘‘Unsteady Burning of Unconfined Fuel Vapor Clouds,’’ in 16th
International Symposium on Combustion, pp. 1397–1405.
Hasegawa, K., and K. Kato. 1978. ‘‘Study of the Fireball Following Steam Explosion of n-Pentane,’’ in
2nd. International Symposium on Loss Prevention, Heidelberg, pp. 297–305.
Holden, P. L., and A. B. Reeves. 1985. ‘‘Fragment Hazards from Failures of Pressurized Liquefied Gas
Vessels,’’ Chemical Engineering Symposium Series, no. 93, pp. 205–217.
Kayes, P. J., ed. 1985. Manual of Industrial Hazard Assessment Techniques, Office of Environmental
and Scientific Affairs, World Bank, Washington, DC.
Kletz, T. 1977. ‘‘Protect Pressure Vessels from Fire,’’ Hydrocarbon Processing, vol. 56, August, pp. 98–
102.
Lees, F. P. 1980. Loss Prevention in the Process Industries, vol. 1, Butterworth-Heinemann, London, pp.
519–528.