Catalogue of optical equipment Catalogue of ... - Optronik Sp. z o.o.

Fiber optic equipment catalogue 2010Contents:FIBER OPTIC INTERCONNECTING COMPONENTS ................................................................................................. 3PASSIVE DEVICES .................................................................................................................................................... 11FIBER OPTIC DOME CLOSURES OZKS 160 ............................................................................................................ 17FTTX INDOOR AND OUTDOOR BOXES ................................................................................................................... 23DISTRIBUTION CABINETS FOR FTTX ...................................................................................................................... 50PATCH PANELS 19” AND 21” OPD ........................................................................................................................... 55SPLICE TRAYS KSP12, KSP24 ................................................................................................................................. 60CLOSURES AND BOXES EQUIPMENT ..................................................................................................................... 62CABLE SPARE LENGTHS MANAGEMENT EQUIPMENT ......................................................................................... 65BURIED CABLE CONTAINERS HDPE ....................................................................................................................... 67www.optronik.com.pl2

Fiber optic equipment catalogue 2010FIBER OPTIC INTERCONNECTING COMPONENTSCABLE ASSEMBLIESFiber optic patch cords are made of highest quality SENKO and R&M components that conform to optical interfacestandards described in IEC/PN-EN 61754. Connector plugs are terminated on modern assembly line SENKO APC8000 and verified by means of Data Pixel andEXFO measurement equipment:KONCENTRIK – measurement equipment forferrule eccentricity verification as well as foreccentricity measurements and tuning ofterminated connectors.DAISI / DASI MT – optical interferometer for 1,25and 2,5 mm connectors and MT / MTRJ end facegeometry measurements.IQS 12001 – optical connectors and passivedevices insertion loss and return loss computermeasurement test set;FOT150 – optical connectors insertion loss andreturn loss measurement test set kit.All offered connectors are compliant with therequirements for interfaces according to PN-EN 61754 and PN-EN 61755. All cable assemblies are compliant withperformance standards series PN-EN 50377 and internal standards of Polish Telecom ZN-05/TPSA-044 forenvironment of U category according to PN-EN 61753-1 (uncontrolled environment, temperature range from –25 to+70°C, relative humidity 5%-95%).Customized products include connectors for use in environmental category E according to PN-EN 61753-1 (extremeenvironment, temperature range from –40 to +85°C, relative humidity 0%-98%, humidity condensation, industrialatmosphere).Plugs are offered in three attenuation grades: S-standard, P-premium, M-master.Standard – high performance plugs providing very good random mate attenuation performance, compliant with IECand PN-EN standards as well as corporate TP S.A. standard. Performance of standard grade plugs fulfilsrequirements of most currently used fiber optic telecommunication systems (SDH, CWDM and CATV).Premium – plugs for most requiring customers, dedicated for use in high-end DWDM systems with high Power levelsand in case of tight optical line loss budget.Master – selection plugs, dedicated for test and measurement and for extremely high optical Power levels in opticalfibers (>30 dBm).Main geometrical parameters of SM PC and APC plugsParameter Standard Premium MasterRadius of curvature PC 2,5/1,25 mm10–25 mm/ 7–15mmRadius of curvature APC5–12mmFiber protrusion/undercut(spherical fit) PC and APC+50nm/ -50nmApex offset for PC and APC plugs < 50um (typical) ≤ 50um ≤ 30umAPC 8° angle tolerance ± 0,3° ± 0,3° ± 0,2°PC angle tolerance ± 0,2° ± 0,2° ± 0,1°Key positioning tolerance for APC ± 0,5° ± 0,5° ± 0,3°Fiber core concentricity in ferrulefor PC and APC plugs≤ 1,5um ≤ 1,0um ≤ 0,3umPC and APC key tuning No Yes Yeswww.optronik.com.pl3

Fiber optic equipment catalogue 2010Measurement documentationEach plug is labeled with unique serial number together with manufacturing date (mm/yy) and has insertion loss andreturn loss test report (against reference plug). Each report contains full identification data for the final product.Master grade plugs are accompanied by concentricity and end face geometry test reports.Main optical parametersConnector typeSM-PCSM-APCSM MTANGLEMMMM MTFLATFC/PCSC/PCE2000/PCMU/PCST/PCLC/PCFC/APCSC/APCE2000/APCMPOMTPST/PCFC/PCSC/PCLC/PCMU/PCMPOMTPRandom matingInsertion loss(PN-EN 61300-3-34),average, IL, dBgrade S ≤ 0,20(99%≤ 0,5)grade P ≤ 0,12(97%≤ 0,25)grade M ≤ 0,10(97%≤ 0,15)grade S ≤ 0,20(99%≤ 0,5)grade P ≤ 0,12(97%≤ 0,25)grade M ≤ 0,10(97%≤ 0,15)≤ 0,35max 0,7≤0,35(95% ≤0,5)max 0,75Insertion loss against referenceplug (PN-EN 61300-3-4),Maximum value,IL, dBgrade S - 0,4grade P - 0,25grade M - 0,15grade S - 0,4grade P - 0,25grade M - 0,15Return loss ofrandom mating(PN-EN 61300-3-6),Minimum value, ORL, dBgrade S – 45grade P - 45grade M – 50grade S – 60grade P – 60grade M - 65No reference plug specification 55No reference plug specification 26≤ 0,50max 1,0 No reference plug specification 26Matingsnumber1009080706050403020100Random mating SC/APC StandardPN- EN 61300-3-34average: 0,159 dBstd. deviation: 0,046 dBMatingsnumber1009080706050403020100Random mating SC/APC PremiumPN- EN 61300-3-34average: 0,068 dBstd. deviation: 0,044 dBInsertion Loss, dBInsertion Loss, dBwww.optronik.com.pl4

Fiber optic equipment catalogue 2010MarkingOrdering exampleJ-SX-SM-SCP-SCP-U-24-100Patch cord simplex terminated with SM SC/PC Premium plugs, fiber SM B2 according to PN-EN 60793-2-50,environment cat. U, reinforced cable of diameter 2,4 mm and length 10 m.P-SX-SMF28-E2AP-U-09-20Pigtail simplex terminated with SM E2000/APC Premium plug, fiber SMF28, environment cat. U, buffered fiber 0,9mm, length 2 m.www.optronik.com.pl5

Fiber optic equipment catalogue 2010FIBER OPTIC CONNECTORS AND ADAPTERS SPECIFICATIONSC connectors - PN-EN 61754-4• SC/PC SM plugs• SC/APC SM plugs• SC/PC MM plugs• SC/PC duplex SM and MM plugs• SC/APC adapters• SC simplex SM and MM adapters• SC “small flange” adapters• SC duplex SM and MM adapters• Plugs terminated on reinforced cables 3/2,4/2mm and buffer fibers 0,9 mmE2000 connectors – PN-EN 61754-15• E2000/PC SM plugs• E2000/APC SM plugs• E2000/PC SM adapters• E2000/APC SM adapters• E-2000 ”small flange” adapters• Plugs terminated on 3/2,4/2 mm cables andbuffer fiber 0,9 mmFC connectors - PN-EN 61754-13• FC/PC SM plugs• FC/APC SM plugs• FC/PC MM plugs• FC DHM adapters• FC/APC narrow key adapters• Plugs terminated on reinforced cables 3/2,4/2mm and buffer fiber 0,9 mmST connectors - PN-EN 61754-3• ST/PC SM plugs• ST/PC MM plugs• ST SM and MM adapters• Plugs terminated on cables 3/2,4 mm andbuffer fiber 0,9 mmwww.optronik.com.pl6

Fiber optic equipment catalogue 2010LC connectors - PN-EN 61754-20• LC/PC SM plugs• LC/PC MM plugs• LC/PC duplex SM and MM plugs• LC duplex SM and MM adapters• Terminated on cables 3,0/2,4/2,0/1,6 mmand buffer fiber 0,9 mmMU connectors - PN-EN 61754-6• MU/PC SM plugs• MU/PC SM Duplex plugs• MU duplex SM adapters• Terminated on cables 3,0/2,4/2,0/1,6 mmand buffer fiber 0,9 mmMPO/MTP connectors – PN-EN 61754-7• MTP and MPO 12 fibers SM (angle) plugs• MTP and MPO 12 fibers MM (flat) plugs• MTP/MPO adapters• Plugs terminated on reinforced ribboncables• Installation of fan-out 12 fibers SM and MMHybrid adapters• FC/PC – SC/PC• FC/PC – ST/PC• FC/PC – E2000/PC• SC/PC – ST/PC• SC/PC – E2000/PC• SC/APC – FC/APC• SC/APC – E2000/APC• SC/PC – ST/PC Duplex• FDDI – ST/PC Duplex• ESCON – ST/PC Duplexwww.optronik.com.pl7

Fiber optic equipment catalogue 2010FIBER OPTIC ATTENUATORSATCFixed attenuators made of doped fiber, optimized for1310, 1550, 1310/1550 nm and bands C and L.• attenuation range: 1…10dB every 1dB, 12, 15, 20,25dB;• tolerance: 1…5dB±0,5dB, 6...25dB±10%;• operating wavelength 1310/1550nm±10nm;• ORL: PC >50dB, APC >65dB;• max optical power >30dBm (1W);• all connector types;• operating temperature range: -40...+75°CATSFused attenuators on reinforced cables.• attenuation range: 3...20dB;• tolerance: 3...5dB±0,5dB, 6...20dB±10%;• operating wavelength: 1310/1550±20nm;• all connector types;• any length;• operating temperature range: -25...+70°CTRM TerminatorsPlug terminators for back-reflection suppression.• ORL: PC >50dB, APC >65dB;• Max. optical power >30dBm (1W);• all main connector styles;• operating temperature range: -40...+75°COrdering exampleATS-10-SM-SCAP-E2AP-U-24-50Fused attenuator 10dB, SM, terminated with SM SC/APC and E2000/APC Premium plugs, environment cat. U, madeon reinforced simplex cable of diam. 2,4 mm and length 5 m.www.optronik.com.pl8

Fiber optic equipment catalogue 2010PRE-TERMINATED CABLES AND FIBERSMPO/MTP indoor cablesIndoor installation cables with MPO or MTP connectors.• MT/APC SM patch cords, female, 12 fibers ribboncable;• hybrid fan-out patch cords MT/APC SMmale/female - SC/E2A/LC/ST, 12 fibers,• MT/PC MM, male/female, 12 fibers ribbon cable;• hybrid fan-out patch cords MT/PC MM,male/female - SC/ST/LC, 12 fibers;• MPO adapters;• optimal fan-out installation in adapted patch panelsand distribution boxes;• environment cat. C according to PN-EN 61753-1(controlled environment)Indoor cables (multi-cables)Pre-terminated indoor cables.• cables of 2-12 buffered fibers 0,9mm SM andMM;• pigtails 0,9mm or 2mm jacket with simplexconnectors;• environment cat. C according to PN-EN61753-1 (controlled environment)Outdoor cables – tacticalPre-terminated outdoor cables.• cables with polyurethane coating (PUR)reinforced by Kevlar fibers, diam. 6 mm;• 2-4 fibers with 0,9mm buffer, SM or MM;• terminated with 2mm reinforced cables withsimplex connectors;• SM and MM LC duplex cables;• environment cat. E according to PN-EN61753-1 (extreme environment)Outdoor trumpet cables, gelledPre-terminated outdoor cables• 2-12 fibers with 0,25 mm coating SM or MM,• terminated with threaded head for CATVequipment (5/8” thread);• pigtails on 0,9mm buffer or;• environment cat. U according to PN-EN61753-1 (uncontrolled environment)www.optronik.com.pl9

Fiber optic equipment catalogue 2010SWR – box optical network simulatorsBoxes with optical fiber for OTDR measurement fordead-zone suppression, dedicated for laboratory testsB&R and education.• SM and MM optical fibers;• Total fibers length up to 4 km;• pigtails of length up to 5m;• terminated with any connectors;• durable and aesthetic housing made ofpolycarbonate.Optical network simulators• OPD/6U – patch panel up to 40km fiber;• OPD/3U – patch panel up to 10 km fiber;• reels with z optical fiber SMF28e of length upto 20km, terminated with pigtails of anyconnector type.Ordering exampleJ-12-SM-MPOAF-MPOAM-C-RC-50Indoor reinforced ribbon cable with 12 SM fibers with MPO angle connectors, female, environment cat. C accordingto PN-EN 61753-1, length 5,0m.F-12-SM-MPOAM-SCP-C-09-20Fan-out, 12 SM fibers, with MPO angle connectors, male and SC/PC premium grade connectors, pigtails on 0,9mmbuffered fiber 2 m length, environment cat. C according to PN-EN 61753-1.SWR-SMF28e-1000-FC-SCA-C-20-50Box with fiber SMF28e 1000m length, environment cat. C according to PN-EN 61753-1, pigtails FC/PC and SC/APC,2mm reinforced cable 5m length.www.optronik.com.pl10

Fiber optic equipment catalogue 2010PASSIVE DEVICESWIDEBAND SPLITTERSPassive devices for coupling and splitting optical power propagating in optical fibers.We provide custom tuning of components, configuration and housing according to customer order.Fused splitters FBT (Fused Biconic Taper)• couplers for BPON, FTTX, CATV networks;• single-element couplers 1(2)x2, 1x3, 1x4 withpigtails on bare fiber 0,25 mm or buffered fiber0,9 mm;• coupling ratio 1x2 from 01/99 to 50/50;• wideband 1310/1550±40nm or triple play1310/1490/1550±40nm;• tree couplers up to 1x32 ports, symmetricaland asymmetrical (tuned) power split;• box housing, pigtails terminated with anyconnector type.Main parametersOptical power split1x2 (50/50)2x2 (50/50)1x31x4Spectral bandwidth, nm1310/1490/1550 (±40nm)Insertion loss, max, dB 3,6 5,8 7,2Non-uniformity, max, dB 0,3 1,0 1,0PDL, max, dB 0,15Thermal stability, max, dB/°C 0,002Directivity, dB>55 (1x2)>65 (2x2)>50 >50Operating temperature range, °C -40...+70Fiber type (SM)Housing dimensions / fiber diameter, mmPlanar technology splitters PLC• Nx4 up to Nx64 ports (N=1,2), fan-outterminated with any connector type;• Nx4 up to Nx64 ports (N=1,2), box modules,0,9mm buffer or 2mm cable pigtails with anyconnector type;• uniform power split in the wavelength band;• wide operating temperature band;Ø3.0 x 55/0.25mmØ3.0 x 60/ 0.9mmCorning SMF-28Ø3.5 x 45/0.25mmØ4.0 x 70/0.9mmØ4.0 x 45/0.25mmØ4.0 x 70/0.9mmwww.optronik.com.pl11

Fiber optic equipment catalogue 2010Main parametersOptical power split 1x4 1x8 1x16 1x32 1x64Spectral bandwidth, nm 1260...1360/1480...1610Insertion loss, max, dB 7,3 10,7 13,7 17,7 21,6Non-uniformity, max, dB 0,8 1,0 1,0 1,3 1,3PDL, max, dB 0,2Thermal stability, max, dB/°C 0,002Return loss, minimum, dB 55Operating temperature range, °C -40...+85Fiber type (SM)Corning SMF-28e® Fiber EquivalentSplitter fan-out dimensions, mm 4 x 4 x 40 4 x 7 x 52Splitter in box dimensions, mm 100x80x10 140x114x20CWDM MULTIPLEXERSPassive devices for coupling and splitting optical signals at ITU-defined 20nm grid transmitted in 1310-1610nm band.CWDM channels parameters shall be equalized and insensitive to polarization and temperature. Operatingbandwidth of CWDM systems ranges from 1430 to 1610nm and comprises 10 channels. It is possible to useadditional channels from 1310nm band.We provide custom tuning of components, configuration and housing according to customer order.Main parametersType MUX DEMUXNumber of channels 10@1550+1@1310 10@1550+1@1310Central wavelengths, nm 1310, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610Interchannel grid, nm 20Bandwidth @ 0,5 dB CWDM (1430-1610), nm > ITU +/- 7Bandwidth @ 0,5 dB (1310), nm > ITU +/- 30Insertion loss (1430-1610), max, dB 4.2 4.2Insertion loss (1310), max, dB 1.8 1.8Insertion loss (for a pair), max, dB 7.0 7.0Channels non-uniformity for a module, dB 1.5 1.5Channels non-uniformity for a pair of modules, dB 2.0 2.0Directivity CWDM, min, dB 55 55Directivity 1310, min, dB 60 65Adjacent channels isolation CWDM, dB - 35Non-adjacent channels isolation CWDM, dB - 45Isolation (1310 to COM), min, dB 60 60Input ORL, min, dB 45 45PDL, max, dB 0,15 0,15PMD, max, ps 0,1 0,1Thermal stability, dB/°C 0,005 0,005Thermal drift, nm/°C 0,005 0,005Optical power, max, mW/dBm 400/26Operating temperature range, °C -10...+60Housing dimensions/fiber diameter, mm160×120×10/0.9mm bufferwww.optronik.com.pl12

Fiber optic equipment catalogue 2010WDM TRIPLEXERBidirectional 1x2 WDM operating in passive FTTH networks; Triple Play signals division 1490nm and 1550nmdownstream and 1310nm upstream.Main parametersTypeFTTX WDMPass bandwidth, nm 1550...1560Reflection bandwidth, nm1260...1360&1480...1500Insertion loss, max, dB 1,0Isolation, min, dB 30Directivity, min, dB 50Return loss, min, dB 50PDL, max, dB 0,2PMD, max, ps 0,2Optical power, max, mW 300Operating temperature range, °C -10...+60SM fiber typeSMF-28Housing dimensions/fiber diameter mmØ5.5x35/0.25mm bare fiber;WDM FILTERSPassive devices for coupling and splitting optical signals of different wavelength propagating in optical fibers.We provide custom tuning of components, configuration and housing according to customer order.WDM FBT (Fused Biconic Taper)• good transmission parameters and stability;• single-element WDM 1x2 1310/1550, pigtails with0,25 mm bare fiber, 0,9 mm buffer or 2,0 mm reinforcedcable, terminated with any connector typeMain parametersType Standard Isolation High IsolationConfiguration1x2, 2x2Spectral bandwidth, nm 1295...1325/1528...1565Insertion loss, max, dB(1295...1325nm/1528...1565nm)0,3 0,7Excess loss dependent on wavelength and temperature,max, dB0,3 0,3Isolation, minimum, dB 17 34PDL, max, dB 0,1 0,2Directivity, minimum, dB 55Optical power, max, mW 500Operating temperature range, °C -10...+60Fiber type SMCorning SMF-28Housing dimensions/fiber diameter, mmØ3.0x55/0.25mm; Ø3.0x55/0.9mm; 6.4x12x96/3mmwww.optronik.com.pl13

Fiber optic equipment catalogue 2010WDM – high isolation• excellent transmission parameters;• narrow operating temperature range;• pigtails with bare or buffered fiber, terminated withany connector type;Main parametersType FWDM HWDMTransmission channel bandwidth @λ1,nm1530...1570 (Type 13/15) 1260...1360 1520...16001470...1510 (Type 13/14) (Type13/15) (Type 15/13)Reflection channel bandwidth @λ2,nm 1290...13301520...1600 1260...1360(Type 13/15) (Type 15/13)Directivity, min, dB 55 55Return loss, minimum, dB 45 50PDL, max, dB 0,2 0,2PMD, max, ps 0,2 0,05Optical power, max, mW 300 500Operating temperature range, °C -10...+60Fiber type SMCorning SMF-28 Fiber equivalentHousing dimensions/fiber diameter, mmØ5,5x35/0.25mm;Ø5,5x50/0.9mmOPTICAL ISOLATORSPassive devices dedicated for non-reflective attenuation of optical signal of specified wavelength for all polarizationstates.Main parametersType PSI single stage PSI dual stageCentral wavelength λc, nm 1310, 1490 or 1550Isolation (23°C, λc±15nm, all polarization states), minimum, dB 32 45Insertion loss (-5...+70°C, λc±20nm, all polarization states),max, dB0,5 0,6ORL (input/output), minimum, dB 60/55 60/55PDL, max, dB 0,1 0,15PMD, max, ps 0,2 0,07Optical power, max, mW 300 300Operating temperature range, °C -10...+60Fiber type SMCorning SMF-28Housing dimensions/fiber diameter, mmØ5.5x55/0.25mmwww.optronik.com.pl14

Fiber optic equipment catalogue 2010PASSIVE DEVICES HOUSING VARIANTSFiber optic equipment manufactured by OPTRONIK allows for various applications of passive devices in fiber optictelecom networks; PON, FTTx, CATV, LAN/WAN in different environmental conditions. Our offer comprises widerange of outdoor closures and distribution frames. The splice organizers are dedicated for installation of large-sizedpassive components.Passive devices in box housing• BB – box type module sized 140x100x20mmwith pigtails on buffered fiber 0,9 mm orreinforced cable 2,0 mm terminated with anyconnector type or not connectorized.• LP – box type module sized 100x80x10mmwith pigtails on buffered fiber 0,9 mm orreinforced cable 2,0 mm terminated with anyconnector type or not connectorized.• MB – box type module sized 100x20x10mmwith pigtails on buffered fiber 0,9 mm orreinforced cable 2,0 mm terminated with anyconnector type or not connectorized.www.optronik.com.pl15

Fiber optic equipment catalogue 2010ACCESSORIES FOR CONNECTORS AND OPTICAL COMPONENTSIsopropyl alcohol (IPA)• bottle 1L• dispenser 200mlCompressed air for opticalcomponents• dispenser 400mlHermetic dispenser for IPA• capacity 100mlLint-free tissues• package 100 pcsCleaning tape in cassettes• Cletop-S• Clean-CoreCleaning sticks for plugs andadapters• 2,5mm• 1,25mmPolishing films for FO connectors• rough• precision• finalEpoxies for fiber optic connectors:• Epotek 353 - 2gwww.optronik.com.pl16

Fiber optic equipment catalogue 2010FIBER OPTIC DOME CLOSURES OZKS 160Fiber optic dome closures OZKS 160 are universal enclosures for aerial,underground, buried and fiber optic ADSS cables, for all kinds oftelecommunication networks.The closure protects fiber connection points from environmental influenceand gives possibility to control the optical fibers. The base and dome ismade of high-density polyethylene (HDPE). Heat-shrinkable or mechanicalsealing system are applied. Closures may be equipped with pressure controlvalve or external grounding clamp.The offer comprises three main dome closure types:• OZKS 160N – closure up to 144 splices;• OZKS 160NK – closure do up to 72 splices;• OZKS 160ND – distribution closure up to 72 splices and 24 FOconnectors.Application rangeOZKS160 closures can be used in environment categories: S (Subterranean environment), A (Aerial environment)and G (Ground environment) according to PN-EN 61753-1 (subterranean, aerial and other above-groundinstallations). OZKS160 closures have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009.Markingwww.optronik.com.pl17

Fiber optic equipment catalogue 2010DOME CLOSURE OZKS 160NClosure base has three round entry ports for cables of diameters 18 mm and oval port for two cables of diameters upto 20 mm. Heat-shrinkable or mechanical cable port sealing are applied along with main head sealing. Internal framemade of painted steel provides base for cable fixing, fiber optic trays and excess tubes of fiber optic cables (includinguncut cables coming through oval entry port). Chassis enables fastening of three KSP 24 splice trays, with capacityfrom 24 heat shrinkable or mechanical splices (diameter from 2.4 to 3 mm) up to 48 fused splices (diameter 2.4±0.2mm). Organizer trays enable installation of fiber optic passive devices and fiber ribbons.Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs.Dimensions: length 635mm, diameter 160mm.Ordering exampleOZKS 160N-2/2S12-AB/DDome closure, pass-drop, equipped with heat-shrinkable sealing kit for three round entry ports and for oval entryport, main sealing kit mechanical OZKS160D, two organizer trays KSP 24/24 for 24 heat-shrinkable fused spliceseach, self-sticking labels for fibers and cables.Technical datawww.optronik.com.pl18

Fiber optic equipment catalogue 2010OZKS160 NK closureClosure base incorporates three round entry ports for cables of diameter 18 mm and oval port for two cables of diameterup to 20 mm. Heat-shrinkable or mechanical cable port sealing are applied along with main head sealing. Internal framemade of painted steel provides foundations for fixing cables and fiber optic trays. Chassis enables fastening of threeKSP 12 splice trays, with capacity from 12 heat shrinkable or mechanical splices (diameter from 2.4 to 3 mm) up to 24fused splices (diameter 2.4±0.2 mm). Organizer trays enable installation of fiber optic passive devices and fiber ribbons.Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs.Dimensions: length 465mm, diameter 160mm.Ordering exampleOZKS 160NK-1/S24-3AM1/DDome closure, equipped with three mechanical sealing kits for round entry ports OZKS160AM1, main mechanicalsealing kit OZKS160D, one organizer tray KSP 12/24 for 24 heat-shrinkable splices, self-sticking labels for fibersand cables.Technical datawww.optronik.com.pl19

Fiber optic equipment catalogue 2010DISTRIBUTION CLOSURE OZKS 160NDThe OZKS 160ND distribution closure is based on the chassis of the OZKS 160N closure with internal frame forKSP12 organizer trays and with additional sliding support for 24 SC-E2000-LC Duplex adapters or 16 FC-STadapters. Up to three organizer trays KSP12, with capacity of 12 fused or mechanical splices each (diameter from2.4 to 3 mm) and up to 24 fused splices (diameter 2.4 ± 0.2 mm) may be fastened to main closure frame.Organizer trays, sealing kits and other auxiliary outfit shall be ordered according to user needs.Dimensions: length 635mm, diameter 160mm.Ordering exampleOZKS 160ND-P-2/S24-2AM1AM4/D-24SCDistribution closure with pressure control valve and support frame for 24 SC adapters, equipped with two mechanicalsealing kits for single cable 12 mm in round AM1 entry ports and one kit for four 3-5mm cables in AM4 port, mainmechanical sealing kit OZKS160D, two KSP 12/S24 organizer trays, self-sticking labels for fibers and cables.Technical datawww.optronik.com.pl20

Fiber optic equipment catalogue 2010OZKS 160 closure equipmentOZKS160C – main heat-shrinkable sealing kitOZKS160D – main mechanical sealing kitOZKS160A – heat-shrinkable sealing kit for threeround cable ports Ø 8-18mmOZKS160AMx – mechanical sealing kit for single roundcable port Ø 8-18mm• AM1 – one cable Ø 8-16mm,• AM3 – three cables Ø 6-8mm,• AM4 – four cables Ø 3-6mm;OZKS160B – heat-shrinkable sealing kit for ovaltwo-cable port Ø8-20mmOZKS160BMx – mechanical sealing kit for ovaltwo-cable/uncut cable port:• BM1 – Ø8…12mm,• BM2 – Ø13…16mm.www.optronik.com.pl21

Fiber optic equipment catalogue 2010USKn – closure pole-mounting bracketUSK – closure wall-mounting bracketwww.optronik.com.pl22

Fiber optic equipment catalogue 2010FTTX INDOOR AND OUTDOOR BOXESOUTLET BOX MSP1SPolycarbonate (PC) made box closures, highly durable (IK-08),non-flammable (UL94-5V), resistant to extreme environmentalconditions, RoHS compliant, color grey RAL 7035.In standard make boxes have a screw-mounted dome and areprepared for wall mounting. Box make may be adjusted to meetindividual customer requirements.Dimensions WxHxD, mm: 100x100x36Assured bounding radius >20 mm.MSP1S/2Outlet boxes with max. 2 SC optical ports or 4 LC Duplex ports.Boxes have a screw-mounted dome, wall side cable feedthrough and spare fiber lengths organizer with S6 holder forfused splices or F6 holder for mechanical Fibrlok splices.1x2 WDM elements can be installed in the box. Adapters are mounted on a hinge with protective rubber bushing on abox side. SC and LC Duplex adapters can be equipped with protective flap. Boxes are prepared for wall mounting,particularly on a recessed box.Application rangeMSP1S/2 boxes are designed for indoor applications (environment cat. C according to PN-EN 61753-1).MarkingOrdering exampleMSP1S/2SC-S6Outlet wall mounted box IP20, dimensions: 100x100x36 mm, wall-side cable feedthrough, 2 SC simplex ports, fiberorganizer with a S6 flexible holder for six fused splices, prepared for wall mounting.www.optronik.com.pl23

Fiber optic equipment catalogue 2010Technical datawww.optronik.com.pl24

Fiber optic equipment catalogue 2010BOX CLOSURES MSP1MSP1 box closures made of polycarbonate(PC), highly durable (IK-08), non-flammable (UL94-5V), resistant toextreme environmental conditions, RoHS compliant, color: grey RAL 7035.In standard make boxes have a screw-mounted dome and are prepared for wall mounting. Box make may beadjusted to meet individual customer requirements.Dimensions WxHxD, mm: 130x130x36www.optronik.com.pl25

Fiber optic equipment catalogue 2010MSP1-12Box with two cable glands or two single rubberfeedthroughs can be used as a closure for 12 splices inLAN and FTTX networks. The boxes come with variousglands’ and feedthroughs’ position configuration (singleside, passing through, angled 90°). The MSPz-1outdoor boxes with IP66 rating are equipped with anextra feedthrough for pressure compensation.The box is equipped with one organizer tray for sparetube/fiber lengths and one lifting organizer tray withone S12 or M10 module for splices and passivedevices. One or two F6 holders for mechanical splicesFibrlok as an option. Standard outfit comprises cablefastening components and self-sticking labels forcables and fibers (OSN and OSK).MSP1FTTX-12Box with IP54 equipped with rubber passing-dropfeedthrough or four single passing type rubberfeedthroughs. The feedthrough enables installation ofpassing cable Ø6-8 mm and up to 9 drop cablesØ3-5mm in FTTx distribution networks.The box is equipped with one organizer tray for sparetube/fiber lengths and one lifting organizer tray withone S12 or M10 module for splices and passivedevices. One or two F6 holders for mechanical splicesFibrlok as an option. Standard outfit comprises cablefastening components and self-sticking labels forcables and fibers (OSN and OSK).MSP1/4-12Box with IP20 equipped with one cable gland andsupport for 4 adapters on the side wall.The box is equipped with one organizer tray for sparetube/fiber lengths and one lifting organizer tray withone S12 or M10 module for splices and passivedevices. One or two F6 holders for mechanical splicesFibrlok as an option. Standard outfit comprises cablefastening components and self-sticking labels forcables and fibers (OSN and OSK).www.optronik.com.pl26

Fiber optic equipment catalogue 2010MSP1-6Box with two cable glands or two single rubberfeedthroughs can be used as a closure for 6 splices inLAN and FTTX networks. The boxes come with variousglands’ and feedthroughs’ position configuration (singleside, passing through, angled 90°). The MSPz-1outdoor boxes with IP66 rating are equipped with anextra pressure valve to prevent water condensing.The box is equipped with one organizer tray for sparetube/fiber lengths and one lifting organizer tray withone S6 holder for six fused splices. One F6 holder formechanical splices Fibrlok as an option. Standard outfitcomprises cable fastening components and selfstickinglabels for cables and fibers (OSN and OSK).MSP1/2-6Box rated IP20 equipped with one cable gland and asupport for two adapters on the side wall.The box is equipped with one organizer tray for sparetube/fiber lengths and one lifting organizer tray withone S6 module for splices. One F6 holder formechanical splices Fibrlok as an option. Standard outfitcomprises cable fastening components and selfstickinglabels for cables and fibers (OSN and OSK).Application rangeThe MSP1 boxes are designed for indoor applications (cat. C according to PN-EN 61753-1).MSP1z with IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1).Outdoor applications of IP54 MSP1FTTX boxes (cat. A and G according to PN-EN 61753-1) are allowed whenmeeting local requirements.MarkingOrdering exampleMSP1FTTX-S12Box enclosure IP54, rubber feedthrough „passing-drop”, lifting organizer tray with a S12 splicing module, labels forfibers and cables OSN12, screws for wall mounting.www.optronik.com.pl27

Fiber optic equipment catalogue 2010Technical dataMSP1-6MSP1FTTX-12MSP1-12MSP1/4SC-12www.optronik.com.pl28

Fiber optic equipment catalogue 2010BOX ENCLOSURES AND DISTRIBUTION BOXES MSP1LBox type enclosures and distribution boxes sized 130x180x36mm, made of polycarbonate (PC), highly durable(IK-08), non-flammable (UL94-5V), resistant to extreme environmental conditions, RoHS compliant.Color: grey RAL 7035.In standard make boxes have a screw-mounted dome and are prepared for wall mounting. In MSP1LH make withheightened dome a patented Master Key lock can be applied.Box make may be adjusted to meet individual customer requirements.MSP(z)1L-12Box enclosure with cable glands (max. 6) can be usedas a closure for up to 12 splices in LAN and FTTXnetworks. Cable glands position is variant according todifferent makes (on one side, straight through, angled90°).MSPz 1L type outdoor enclosures IP66 are equippedwith special pressure control feedthrough.Enclosure is equipped with organizer for sparetubes/fibers lengths storage and lifting organizer traywith one S12 or M10 splices module, optionally one ortwo F6 holders for Fibrlok mechanical splices. Basicequipment includes cable mounting elements andadhesive fiber and cable identification markers (OSNand OSK).MSP1LFTTH-12IP54 box enclosure equipped with rubber „passingdrop”feedthroughs, „passing” feedthroughs and cableglands.The „passing-drop” feedthrough allows to install anuncut (passing) cable with diameter of 5-9 mm and upto 9 individual cables with diameter of 3-5 mm (drop) inFTTX distribution networks.Individual „passing” feedthrough is designed for uncutcable installation as well.Enclosure is equipped with organizer for sparetubes/fibers lengths storage and lifting organizer traywith one S12 or M10 splices module, optionally one ortwo F6 holders for Fibrlok mechanical splices. Basicequipment includes cable mounting elements andadhesive fiber and cable identification markers (OSNand OSK).www.optronik.com.pl29

Fiber optic equipment catalogue 2010MSP1LH/4-6Distribution box IP66 with 5-9 mm cable glands or IP54with rubber feedthroughs/patented lock. Rubberfeedthroughs enable installation of passing cables 5-10 mm and connectorized patch cords.The box has a support for four adapters and anorganizer tray for cable fixing, splice holding and sparefiber lengths management.The organizer can be equipped with one S12 or S6holder for fused splices or a F6 holder for mechanicalFibrlok splices as an option.Standard equipment covers cable installation elementsand self-sticking labels for cables and fibers (OSN andOSK).Dimensions WxHxD, mm: 130x180x55.Application rangeMSP1L box enclosures are designed for indoor applications (cat. C according to PN-EN 61753-1).MSPz1 makes with cable glands are designed for outdoor applications (cat. A and G according to PN-EN 61753-1).Outdoor applications of IP54 MSP 1LFTTX with cable feedthroughs and patented security locks (cat. A and Gaccording to PN-EN 61753-1) are allowed when meeting local requirements.MarkingOrdering exampleMSP1LFTTX-S12Box enclosure, IP54 make, two rubber passing-drop feedthroughs, screw fixed dome, cable and fiber organizer,lifting tray with a S12 holder, labels for cables and fibers OSN12, screws for wall mounting.MSP1LHK/4ST-S6Box enclosure, IP54 make, two rubber passing feedthroughs or 5-9 mm cable glands, dome on hinges, patentedlock, internal tray for 4 ST adapters, organizer with a S6 holder, labels for cables and fibers OSN12, screws for wallmounting.www.optronik.com.pl30

Fiber optic equipment catalogue 2010Technical dataTechnical datawww.optronik.com.pl31

Fiber optic equipment catalogue 2010Technical data MSP1LH/4 –6www.optronik.com.pl32

Fiber optic equipment catalogue 2010DISTRIBUTION BOXES FTB1Box enclosures and distribution boxes, dimensions 180x130x45mm, made of polycarbonate (PC), mechanicallyresistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHS compliant, ratedIP54, color grey RAL 7035The box has two wall-side cable inlets and two cable glands on the bottom side. Box cover is latch-fixed with optionalpatented Master Key system lock.In standard make boxes are prepared for wall mounting. Box make may be adjusted to meet individual customerrequirements.FTB1/XThe box has two PA cable glands Ф5-9mmon the bottom side and a support for fouradapters. Fiber organizer is adapted for0.9 mm buffered fiber and has two S6holders (for six fused splices each),optionally two F6 holders (for sixmechanical Fibrlok splices each).Standard equipment covers cableinstallation elements and self-stickinglabels for cables and fibers (OSN andOSK).Application rangeThe FTB1 boxes are designed for indoor applications (environment cat. C according to PN-EN 61753-1).Operating temperature range: -10…+60ºC, humidity up to 95%.Outdoor applications of IP54 FTB1 boxes (cat. A and G according to PN-EN 61753-1) are allowed when meetinglocal requirements.MarkingOrdering exampleFTB1/4SC-2F6Box enclosure IP54, two cable glands, internal support for 4 SC adapters, two holders for 6 Fibrlok splices, labels forcables and fibers OSN12, screws for wall mounting.www.optronik.com.pl33

Fiber optic equipment catalogue 2010Technical datawww.optronik.com.pl34

Fiber optic equipment catalogue 2010DISTRIBUTION BOXES MSP2Box enclosures and distribution boxes, dimensions WxHxD, mm: 175x175x75, made of polycarbonate (PC),mechanically resistant (IK 08), non-flammable (UL94-V0), resistant to extreme environmental conditions, RoHScompliant, color grey RAL 7035In standard make the box has a screw-fixed cover and is prepared for wall mounting. Box make may be adjusted tomeet individual customer requirements.MSP2-12Enclosure housing is rated IP65 equipped with twocable glands, which position can be configured onmake if needed.The box has a buffered fiber organizer with a spliceholder for 12 fused splices or two F6 holders formechanical Fibrlok splices as an option.Standard equipment covers cable installation elementsand self-sticking labels for cables and fibers (OSN andOSK).MSP2/XDistribution box housing is rated IP20 equipped withtwo cable glands, which position can be configured onmake if needed and a support for 8 adapters on a sidewall.The box has a buffered fiber organizer with a spliceholder for 12 fused splices or two F6 holders formechanical Fibrlok splices as an option.Standard equipment covers cable installation elementsand self-sticking labels for cables and fibers (OSN andOSK).Application rangeThe MSP2 enclosures and distribution boxes are designed for indoor applications (environment cat. C according toPN-EN 61753-1).MarkingOrdering exampleMSP2/8SC-S12Distribution box IP20, two cable glands, PS-010 support for eight SC-E2 adapters, one S12 splice tray, labels forcables and fibers OSN12, screws for wall mounting.www.optronik.com.pl35

Fiber optic equipment catalogue 2010Technical data MSP2/8www.optronik.com.pl36

Fiber optic equipment catalogue 2010BOX ENCLOSURES AND DISTRIBUTION BOXES MSP3Box enclosures and distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable(UL94-5V), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035.Boxes are equipped with KSP12 splice trays. In standard make the box has a screw-fixed cover and is prepared forwall mounting. Box make may be adjusted to meet individual customer requirements.MSP3Box enclosures, dimensions: 180x255x75mm withmax. two KSP12 splice trays.In standard make the boxes are equipped with cableglands (three on the top and three on the bottom side).MSPz3 enclosures rated IP66 for outdoor applicationsare equipped with pressure control valve to preventwater condensing.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK), wall mounting elements.MSP3HBox enclosures, dimensions: 180x255x100mm withmax. three KSP12 splice trays.In standard make the boxes are equipped with cableglands (three on the top and three on the bottom side).In MSP3H type boxes an additional lifting support forsplitter module can be installed in place of the thirdsplice tray (max split 2x32).MSPz3H enclosures rated IP66 for outdoorapplications are equipped with pressure control valveto prevent water condensing.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK), wall mounting elements.MSP3FTTXIn MSP3FTTX type boxes a rubber passing-dropfeedthrough IP54 is installed. The feedthrough enablesinstallation of uncut cable Ø6-8 mm and up to 36cables Ø3-5 mm.In MSP3FTTH type boxes an additional lifting supportfor splitter module can be installed in place of the thirdsplice tray (max split 2x32).Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK), wall mounting elements.www.optronik.com.pl37

Fiber optic equipment catalogue 2010MSP3/XDistribution boxes, dimensions: 180x255x75 mm.In MSP3.1 make the boxes are equipped with oneKSP12 splice tray, one PS010 module – FC-ST or SC-E2 type installed on an internal support and three cableglands PA16 type 10-14 mm on top or bottom side.In MSP3.2 make the boxes are equipped with oneKSP12 splice tray, one PS010 module – FC-ST or SC-E2 type installed on a side wall, three cable glandsPA16 type 10-14 mm on top or bottom side. andoptionally a pressure control valve.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK), wall mounting elements.MSP3H/XDistribution boxes, dimensions: 180x255x100 mmequipped with one KSP12 splice tray and an internalsupport for two PS-010 modules with 16-24 adaptersand three cable glands PA16 type 10-14 mm on top orbottom side.In MSPz3H make rated P66 for outdoor applicationsthe boxes are also equipped with pressure controlvalve.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK), wall mounting elements.Application rangeAll MSP3 makes are designed for indoor applications (cat. C according to PN-EN 61753-1).The MSPz3 makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1.MarkingOrdering exampleMSPz3H/24SC-1/S24Distribution box, IP66 – for outdoor applications, three cable glands, internal support with two PS-010 modules for12SC Small Flange adapters, one KSP12/S24 organizer tray for 24 splices, self-sticking labels for cables and fibersOSN24, screws for wall mounting.www.optronik.com.pl38

Fiber optic equipment catalogue 2010Technical data MSP3Technical data MSP3Hwww.optronik.com.pl39

Fiber optic equipment catalogue 2010Technical data MSP3 FTTXTechnical data MSP3.1/Xwww.optronik.com.pl40

Fiber optic equipment catalogue 2010Technical data MSP3.2/XTechnical data MSP3H/Xwww.optronik.com.pl41

Fiber optic equipment catalogue 2010BOX ENCLOSURES AND DISTRIBUTION BOXES MSP4Box enclosures and distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable(UL94-V0), resistant to extreme environmental conditions, RoHS compliant, color grey RAL 7035.Boxes are equipped with KSP12 splice trays. In standard make the box has a screw-fixed cover and is prepared forwall mounting. Box make may be adjusted to meet individual customer requirements.MSP4Box enclosures, dimensions: 190x380x130 mm withmax. three KSP12 splice trays.In standard make the boxes are equipped with cableglands (PG16 type 10-14mm, four on the top and fouron the bottom side).MSPz4 enclosures rated IP66 for outdoor applicationsare equipped with pressure control valve to preventwater condensing.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK).MSP4/XDistribution boxes, dimensions: 190x380x130 mm withmax two KSP24 splice trays and internal support withPS-010 modules for 16-24 adapters and four cableglands (PA16 type 10-14mm on top or bottom side).MSPz4 enclosures rated IP66 for outdoor applicationsare equipped with pressure control valve to preventwater condensing.Basic equipment includes: one splice tray, cable fixingand arrangement elements, labels for cables and fibers(OSN and OSK).Application rangeAll MSP4 makes are designed for indoor applications (cat. C according to PN-EN 61753-1).The MSPz4 makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1.MarkingOrdering exampleMSPz4/24SC-1/2S24Distribution box, IP66 – for outdoor applications, four cable glands, internal support with two PS-010 modules for12SC-E2 Small Flange adapters, one KSP24/2S24 organizer tray for 48 splices, self-sticking labels for cables andfibers OSN24, screws for wall mounting.www.optronik.com.pl42

Fiber optic equipment catalogue 2010Technical data MSP4Technical data MSP4 Xwww.optronik.com.pl43

Fiber optic equipment catalogue 2010DISTRIBUTION BOXES MSP5Distribution boxes, made of polycarbonate (PC), mechanically resistant (IK 08), non-flammable (UL94-V0), resistantto extreme environmental conditions, RoHS compliant, color grey RAL 7035.Boxes are available with either screw-fixed cover or with cover on hinges with Master Key system lock. Boxes areprepared for wall mounting. Box make may be adjusted to meet individual customer requirements.MSP5/XDistribution boxes, dimensions: 270x380x130 mm,with max two KSP24 splice trays and an internalsupport with four PS-010 modules for 32-48 adapters.Boxes are equipped with cable glands: PG16 type 10-14mm, three on the top and three on the bottom sidefor cables feed and PG21 type 13-18mm max two onthe top and two on the bottom side for patch cordbundle feed.Basic equipment includes: cable and patch cord fixingand arrangement elements, labels for cables and fibers(OSN and OSK) and wall mounting elements.Application rangeAll MSP5 makes are designed for indoor applications (cat. C according to PN-EN 61753-1).MarkingOrdering exampleMSP5/48SF-2/2S24-NYYDistribution box with cover on hinges with Master Key system lock, equipped with internal support with four PS-010modules for 48 SC-E2 Small Flange type adapters, two KSP24/2S24 trays for 96 splices, self-sticking labels forcables and fibers OSN24, screws for wall mounting.www.optronik.com.pl44

Fiber optic equipment catalogue 2010Technical data MSP5www.optronik.com.pl45

Fiber optic equipment catalogue 2010MODULAR DISTRIBUTION BOXES PSNDistribution boxes, made of polycarbonate (PC), highlydurable (IK-08), non-flammable (UL94-V0), resistant toextreme environmental conditions, RoHS compliant, color:grey RAL 7035, rated IP66 – for both indoor and outdoorapplications.The boxes can be fixed to each other by their side walls invarious combinations.In standard make boxes have a screw-mounted dome andare prepared for wall mounting.Optional equipment covers:• covers on hinges, patented locks,• additional cable glands and feedthroughs (D1,D2and P1,P2 type) and IP67 pressure control valve toprevent water condensing.Basic PSN elements:• Cable termination boxes equipped with cable glands, holders for spare cable lengths storage, lifting splicetray support which provides safe fiber spare lengths and fused splices storage.• Distribution boxes equipped with cable glands and cable bundles feedthroughs, holders for spare cablelengths storage, and internal supporting elements for optical adapters installation.Box modules are fixed by their side walls. Internal cable communication is done by openings in the adjacent walls.Cable glands and feedthroughs can be placed on the top or bottom side of a box.As optional equipment the P1 and P2 feedthroughs can be applied to enable insertion of an uncut cable andextraction of cable bundles terminated with large sized optical connectors.The PSN distribution boxes are adaptable for modular extension, even when already installed in customer’spremises. Box make may be adjusted to meet individual customer requirements.Application rangePSN makes rated IP65 are designed for indoor applications (cat. C according to PN-EN 61753-1) – central office,containers, cabling rooms etc.PSN makes rated IP66 are designed for outdoor applications (cat. A and G according to PN-EN 61753-1.PSN distribution boxes have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009Markingwww.optronik.com.pl46

Fiber optic equipment catalogue 2010PSN 8Single-chamber distribution box, dimensions:190x380x130mm suitable for installation of 16-24 connectors.Standard equipment:• one organizer tray KSP24 for 24 or 48 splices (max2 organizer trays);• interconnection module support for two modules PS-010 (16-24 optical ports);• one cable glands set – D2;• cables and bundles fastening and storingcomponents;• self-sticking labels for cables and fibers (OSN andOSK);• components for wall mountingPSN 16Two-chamber distribution box of dimensions380x380x130mm dedicated for installation of 24-36 fiberoptic connectors.Standard outfit:• one organizer tray KSP24 (max 3 organizer trays);• sliding support for three modules PS-010 (24-36optical ports);• two cable glands sets – D1 and D2• cables and bundles fastening and storingcomponents;• self-sticking labels for cables and fibers (OSN andOSK)• components for wall mountingPSN 32Two-chamber distribution box of dimensions470x380x130mm dedicated for installation of 48-72 fiberoptic connectors.Standard outfit:• one organizer tray KSP24 (max 3 organizer tray);• sliding support for six modules PS-010 (48-72optical ports);• two cable glands sets – D1 and D3• cables and bundles fastening and storingcomponents;• self-sticking labels for cables and fibers ( OSN andOSK)• components for wall mountingOrdering examplePSN16/36SF-3/2S24-YNNDistribution box, IP66 with pressure control valve – for outdoor applications, swinging support with three PS-010modules for 12SC-E2 Small Flange adapters, three KSP24/2S24 organizer trays for 48 splices, D1 and D2 cableglands, self-sticking labels for cables and fibers OSN24, screws for wall mountingAdditional equipment: D1 and D2 cable glands, P1 and P2 cable feedthroughs, splice protection sleeves, adapters,pigtails and patch cords should be ordered according to customer’s needs.www.optronik.com.pl47

Fiber optic equipment catalogue 2010Technical data – PSN 8Technical data – PSN16www.optronik.com.pl48

Fiber optic equipment catalogue 2010Technical data – PSN32Additional equipment for PSN boxesCable gland module D1, D2Cable gland modules are installed in side openingcovers:• D1 – small cover with three GPA16 glands;• D2 – small cover with two GPA16 glands andone GPA21 gland;• D3 – large cover with two GPA16 and twoGPA21 glands;• protection rating: IP66Cable feedthroughs P1, P2IP20 rated feedthroughs with foam gasket PE screwfixed replacing gland covers:• P1 – small feedthrough;• P2 – large feedthrough;• make color: grey RAL 7035• protection rating IP41www.optronik.com.pl49

Fiber optic equipment catalogue 2010DISTRIBUTION CABINETS FOR FTTXDISTRIBUTION CABINETS MST6 AND MSP6Universal cabinets for indoor and outdoor applications in FTTX fiber optic networks, and in industrial, corporate orpublic networks (i.e. copper or fiber based CCTV monitoring) The cabinet’s protection level is rated IP66, mechanicalresistance IK-10, flammability UL94-V0. Cabinets also complies with 2002/95/WE (RoHS).MSP6 type cabinets sized 400x600x230 mm are made of reinforced polyester, color grey RAL 9002.MST6 types are sized 400x600x250 mm made of powder painted steel, color grey RAL 7035.The cabinets have ATEX Ex safety certificate for use in potentially explosive atmospheres. The cabinets come withdoor on hinges, locks and wall mounting elements. Cabinets can also be equipped in P1 type cable glands on top orbottom side. IP66 rated cabinets for outdoor applications have a special pressure valve to prevent water condensing.Cabinet makes can be adjusted to meet individual customer needs.www.optronik.com.pl50

Fiber optic equipment catalogue 2010MSP6.1/XMST6.1/XFiber optic distribution cabinets are equipped with lifting support forKSP12 splice trays (max 6 pcs. for 144 splices), one sliding distributionframe (ODF) module for 96 standard adapters or 144 SC-E2000 SmallFlange adapters and also a support for box type, connectorized splitterinstallation (max 4 splitters 2x32) or other passive/active devicesaccording to customer’s needs. Splitters’ output ports’ pigtails areconnected directly in ODF.MSP6.2/XMST6.2/XFiber optic distribution cabinets are equipped with two symmetricallyplaced modules for KSP12 splice trays (total max 8 pcs for 192 splices),one sliding ODF module for 64 standard adapters or 96 SC-E2000Small Flange adapters and also a support for box type, connectorizedsplitter installation (max 4 splitters 2x32) or other passive/active devicesaccording to customer’s needs. Splitters’ output ports’ pigtails areconnected directly in ODF.Application rangeAll MSP6 and MST6 makes are designed for indoor applications (cat. C according to PN-EN 61753-1).Special MSP6 and MST6 makes rated IP66 with pressure control valve are designed for outdoor applications (cat. Gaccording to PN-EN 61753-1.MarkingOrdering exampleMSP6/96SC-4/S24-YYYOutdoor distribution cabinet made of polyester, rated IP66, four cable glands, ODF module for 96 SC-E2 standardadapters, four KSP12/S24 splice trays for 96 splices, self-sticking labels for cables and fibers OSN96, screws for wallmounting.Technical dataMake variant Housing materialDimensions,mmW x H x DWeight,kgOptical ports number*,maxNumber ofKSP12 trays /number of splices, maxMSP 6.1/X polyester 400x600x230 12 96SC(144SF) 6/144MST6.1/X painted steel 400x600x250 19 96SC(144SF) 6/144MSP6.2/X polyester 400x600x230 13 64SC(96SF) 8/192MST6.2/X painted steel 400x600x230 20 64SC(96SF) 8/192(*) – number of optical ports for application of: SC adapters with protective flap and E-2000 (SC) – flange typeor flapless SC adapters and E2000 – small flange (SF) type.www.optronik.com.pl51

Fiber optic equipment catalogue 2010Technical data – MST6www.optronik.com.pl52

Fiber optic equipment catalogue 2010MSP6.3/XMST6.3/XDistribution cabinets dedicated for FTTH.Cabinets are equipped with a lifting module for KSP12 splice trays(max 6 pcs. for 144 splices), sliding distribution frame (ODF) module(max 96 standard adapters or 144 SC-E2000 Small Flange adapters)and a splitter distribution frame module for two connectorized boxtype splitters (64 ports SC-E2 type). Splitters’ output ports are crossconnectedwith any port on ODF using short patch cords, withoutneed of splitter cabling rearrangement.Splitters’ input ports are spliced with fiber optic line by fused ormechanical splices or switchable with connectors using ODF.Cabinets can also be equipped in P1 type cable glands on top orbottom side.Application rangeAll MSP6 and MST6 makes are designed for indoor applications (cat. C according to PN-EN 61753-1).Special MSP6 and MST6 makes rated IP66 with pressure control valve are designed for outdoor applications (cat. Gaccording to PN-EN 61753-1.MarkingOrdering exampleMSP6.3/64SC-4/S24-YYYOutdoor distribution cabinet made of polyester, rated IP66, splitter distribution frame for 64 SC-E2A adapters, ODFmodule for 96 SC-E2 standard adapters, four KSP12/S24 splice trays for 96 splices, four cable glands, self-stickinglabels for cables and fibers OSN96, screws for wall mounting.Technical dataMake variantHousingmaterialDimensions,mmW x H x DWeight,kgOptical portsnumber*, maxSplitter’s opticalports number*,maxNumber of KSP12 trays/number of splices, maxMSP 6.3 /X polyester 400x600x230 13 96SC(144SF) 64SC(64SF) 6/144(*) – number of optical ports for application of: SC adapters with protective flap and E-2000 (SC) – flange type orflapless SC adapters and E2000 – small flange (SF) type.www.optronik.com.pl53

Fiber optic equipment catalogue 2010Technical data MSP6.3/Xwww.optronik.com.pl54

Fiber optic equipment catalogue 2010PATCH PANELS 19” AND 21” OPDPatch panels for installation in 19” or 21” racks andcabinets.Patch panel consists of bearing frame with removablecover and of swinging drawer with splice trays and frontpanels for connector installation.Swinging drawers provide easy access to splice traysand optical connectors during service works due tooptimal spare cable and fiber lengths management.Universal patch panels OPDU are adapted for easylatch installation of PS-010 connector modules on thefront panel, which enables flexible configuration ofoptical connectors. Available are modules: 8FC-ST,8SC-E2, 12SF (Small Flange) and dummy modules.OPDP type patch panels feature reduced installationdepth and interchangeable mounting holders 19” and21” with adjustable positioning.The OPD panels family is a whole range of 1U, 2U and3U patch panels with various optical ports number along with additional equipment for cable management andcommunication within the rack or cabinet: cable dividers, spare lengths management panels, labeling panels, cableholder modules, etc.Application rangeThe OPD patch panels are designed for indoor applications (cat. C according to PN-EN 61753-1) – station objests,containers, cabling rooms etc.OPD patch panels have approval of MŁ and comply with TP S.A. industrial standard ZN-96/TP S.A.-009MarkingOrdering exampleOPDP21/1U-24SC-1/S24-NYPPatch panel with reduced installation depth 200mm 1U with mounting holders 21”, universal front panel for 24 SC-E2000 adapters, patch cord tray, one KSP12/S24 splice tray, self-sticking labels for cables and fibers, mountingscrews/elements, color grey RAL 7035.www.optronik.com.pl55

Fiber optic equipment catalogue 2010UNIVERSAL 19” PATCH PANELS OPDUOPDU/1U• panels 19”/1U with universal front board forinstallation of three modules PS-010;• installation depth 300 mm;• organizer tray KSP12 or KSP24 according toorder;• standard outfit comprises self-sticking labelsfor fibers and cables and assemblycomponents.Panels are available in color grey RAL7032.OPDU/2U• panels 19”/2U with universal front board forinstallation of six modules PS-010;• installation depth 300 mm;• two organizer trays KSP12 or KSP24according to order;• standard outfit comprises self-sticking labelsfor fibers and cables and assemblycomponents.Panels are available in color grey RAL7032.OPDU/3U• panels 19”/3U with universal front board forinstallation of twelve PS-010 modules;• installation depth 300 mm;• max three organizer trays KSP24 accordingto order;• standard outfit comprises self-sticking labelsfor fibers and cables and assemblycomponents.Panels are available in color grey RAL7032.PZS/1U• spare lengths tray for station cables with adrawer.• installation depth 300mm;• front panel with optional patch cord holdingrack.Panels are available in color grey RAL7032.PZS/2U• spare cable lengths tray for station cables witha drawer;• installation depth 300mm;• front panel with a patch cord rack;Panels are available in color grey RAL7032.www.optronik.com.pl56

Fiber optic equipment catalogue 2010PATCH PANELS 19” AND 21” WITH REDUCED INSTALLATION DEPTH OPDPOPDP/1U• patch panel for 24-36 optical ports;• installation depth 200mm;• interchangeable mounting holders 19 and 21”;• adjustable position of mounting holders;• front boards with 24 holes FC-ST type or up to36 SC-E2 type,• optional patented lock (for SC-E2A type);• optional universal front panel with 3 PS-010modules and patch cord rack – no lock)• one organizer tray KSP12 or KSP24according to order;• standard outfit comprises self-sticking labelsfor fibers/cables and assembly components.Panels are available in color grey RAL7032.OPDP/2U• patch panel for 36-48 optical ports;• installation depth 200mm;• interchangeable mounting holders 19 and 21”;• adjustable position of mounting holders;• universal front panel for 6 modules PS-010,with optional patch cord rack;• one KSP24 splice tray;• standard outfit comprises self-sticking labelsfor fibers/cables and assembly components.Panels are available in color grey RAL7032.PZPS/1U• spare cable lengths tray for station cables witha drawer;• installation depth 200mm;• interchangeable mounting holders 19 and 21”;• adjustable position of mounting holders;• front panel with optional patch cord rack;• OPDP compatible.Panels are available in color grey RAL7032.www.optronik.com.pl57

Fiber optic equipment catalogue 2010MODULAR PATCH PANELS 19” OPDMOPDM/3U• panel 3U is a chassis for installation of largeoptical nodes in 19 inch cabinets;• enables installation of up to 14 modules M/3Utype with 12 optical adapters each or passivedevices with up to 12 ports;• possible installation of only PS-010 modules(i.e. for pre-terminated break-out cables);• color grey RAL7032.M/3U module• modules for chassis OPDM/3U for installationwith screws on the front side;• module has holders for fixing transport tubeswith buffered fibers or station cables, a sparefiber lengths organizer (for buffered fiber0,9 mm) and also an interchangeable holderfor splices or passive devices;• module for 8 FC/ST adapters – M/3U/8FC;• module for 8 SC/E2000 adapters –M/3U/8SC;• module for 12 SC/E2000 Small Flangeadapters – M/3U/12SF;• standard outfit comprises self-sticking labelsfor fibers/cables OSN12 and assemblycomponents;• color grey RAL7032.www.optronik.com.pl58

Fiber optic equipment catalogue 2010PATCH PANEL EQUIPMENTFront panel 19”/1U• LU/1U – panel with CHM cable holders forhorizontal station cable communication;• LO/1U – panel with a translucent tray forinsertion of a description label;• color grey RAL7032.Cable divider RK12, RK24Dividers are designed for outdoor cable fastening anddividing of fibers into bundles protected by transporttubes (RK12 and RK24 for 12 or 24 tubesrespectively).Dividers utilize corrugated Miniflex tubes Ø5/3 mmproviding mechanical protection and maintaining safebound radius. Transport tubes are to be orderedseparately according to customer’s needs. Divider’sconstruction provides outdoor cable grounding ifrequired.Installation panel LRKPanel 19”/1U with holes for installation of up to eightRK dividers in a rack or cabinet. Mounting screwsincluded.Color RAL 7032.www.optronik.com.pl59

Fiber optic equipment catalogue 2010SPLICE TRAYS KSP12, KSP24KSP type splice trays’ size is adapted for storing and arrangement of ribbon fiber splices, mechanical splices andpassive devices up to 60 mm length, maintaining bound radius over 30 mm. Interchangeable splice holders enableapplication of various heat-shrinkable protective sleeves, mechanical splices and passive elements of variousdimensions. Installation of other supplier’s holders (3M, Corning) is also possible. Modular extension of splice traysset is simple due to the latch hinges installed on each tray. Splice tray’s body and splice holders are made ofpolycarbonate (PC), hinges made of polyamide (PA), covers of pressed PVC.Application rangeSplice trays are designed for installation in closures, distribution boxes and patch panels within temperature rangefrom -40 to +70°C.KSP 12• dimensions: 186x136x13 mm;• installation of 1-2 holders: S24 for fused splices,S12 and M10 for fused splices, passive devices ormechanical splices 4x4mm, F6 for Fibrlok typemechanical splices;• recommended installation density: 24 fibers or six12-fiber ribbons;• latch hinges, PVC cover and cable ties included.KSP 24• dimensions: 300x136x13 mm;• installation of 2-4 holders: S24 for fused splices,S12 and M10 for fused splices, passive devices ormechanical splices 4x4mm, F6 for Fibrlok typemechanical splices;• recommended installation density: 48 fibers ortwelve 12-fiber ribbons;• latch hinges, PVC cover and cable ties included.Interchangeable splice and passive device holders• S12 – 12 splice sleeves and passive devicesØ2,4-3 mm;• M10 – 10 mechanical splices and passive devicesof dimensions 4x4 mm (±0,2mm);• S24 – 24 splice sleeves Ø2,4mm ±0,2mm, twolayers in flexible comb;• latched covers;• full compatibility.www.optronik.com.pl60

Fiber optic equipment catalogue 2010Ordering exampleKSP12/S24Organizer tray KSP12 with one S24 module, latch hinges, cover and cable ties included.KSP24/S24/F6Organizer tray KSP24 with one S24 module and one F6 module, latch hinges, cover and cable ties included.Technical data KSP 12Technical data KSP 24www.optronik.com.pl61

Fiber optic equipment catalogue 2010CLOSURES AND BOXES EQUIPMENTFused splice protective sleeves SPHeat-shrinkable sleeves for protection of fused splices. Applicable for primary fiber 0.25 mm and buffered fiber0.9 mm as well as their combinations. Shrinks in all models of built-in splicer’s shrink ovens and in hot air from aheater gun in temperature of 120 O C. After shrinkage the sleeves are fully airtight and provide good mechanicalprotection of the splice. The range of available products comprises splice sleeves of diameter (after shrinkage) 2,4 or3 mm and length 60 or 45 mm.Mechanical fiber optic splicesFibrlok – 3M mechanical splices:• Fibrlok II 2529• interconnection of SM and MM fibers 0.25 mmand 0.9 mm;• 6-splice holders for splice trays andorganizersCamSplice – Corning mechanical splices:• CamSplice 95-000-04• CamSplice 95-000-04-ATC (Anti TorsionCrimp)• interconnection of SM and MM fibers 0.25 mmand 0.9 mm;• 5-splice holders for splice trays andorganizersApplication rangeFused splices protective sleeves are designed for use in dome closures and distribution boxes within temperaturerange from –40 to +70°C.The SP sleeves were tested on conformity with Ministry of Telecommunications requirements and TP S.A. industrialstandard number ZN-96/TPSA-009 (applied with OZKS160 closures).Ordering exampleSP60/24Heat-shrinkable protective sleeve for fused splices, length 60 mm, diameter (after shrinkage) 2.4 mm.www.optronik.com.pl62

Fiber optic equipment catalogue 2010Cable holders CHMHolders (collars) for cable bundles.Material: polyamide, bore dimensions 34x20 mm.Mounted with single screw or rivet using positioning pin,alternatively with self-adhesive Velcro tape.Color RAL7035Cable holders CHDHolders (collars) for cable bundles in distribution boxesand cabinets. Material: polyamide, bore dimensions:80x20 mm. Mounted with single screw (included).Color RAL7035.Velcro tapes RKWVelcro tapes for fastening cable bundles and otherelements in closures, boxes or cabinets.• RKWRA-20-BK width: 20 mm, sold in runningmeters;• RKWA-9 dimensions: 90x10 mm, formed inthreading eyelet – packed by 100 pcs.Cable glands GPACable glands made of polyamide for individualinstallation:• GPA M16 – bore diameter 5-10 mm, installationin M16 hole or with a counter-screw;• GPA16 – bore diameter 10-14 mm, installationwith a counter-screw (optional cable grip);• GPA21 – bore diameter 13-18 mm, installationwith a counter-screw (optional cable grip);Cable ties TKTies for cable fastening, material: polyamide (black),length L: from 90 to 300 mm – packed by 100 pcs.Adapter installationmodules PS-010Universal panel modules made of polycarbonate forinstallation of optical adapters in distribution boxes andcabinets PSS, PSN, MSP and OPDU panels.Available makes:• PS010/ 8FC-ST,• PS010/ 8SC-E2,• PS010/ 12SF (SC-E2 Small Flange);• PS010/CSDX (SC Duplex);• PS010/Z (dummy).The PS-010 modules are mounted with latches andenable flexible configuration of optical ports indistributors. LGX Lucent compatible.Available colors: grey RAL7032 and on demandRAL7035www.optronik.com.pl63

Fiber optic equipment catalogue 2010LABELS FOR FIBERS AND CABLESOSNSelf-sticking labels on a vinyl film with a thermal print.Designed for optical fibers, buffer tubes and cableswith diameter up to 3 mm.• dimensions 20x10 mm;• in sheets of 24 pcs. each with doublenumeration: 1-12; 13-24; 25-36; 37-48 etc.;• sheets with custom print available for quantity>1000 labels.ONLClamp cable markers for buffer tubes and cables withdiameter from 1.5 to 3.4 mm.• numerical markers 0-9;• alphabetic markers A-Z;• markers come on applicators by 30 pcs ofsame type.OSL1Self-sticking warning labels on yellow vinyl film.• dimensions 40x20 mm;• black print „UWAGA LASER”.OSL2Self-sticking warning labels on yellow vinyl film.• dimensions 60x30 mm;• black print „UWAGA – NIEWIDZIALNEPROMIENIOWANIE LASEROWE”.OSKSelf-sticking warning labels on yellow vinyl film.• dimensions 110x55 mm;• black print „UWAGA – KABELŚWIATŁOWODOWY”;• blank field for description (use permanentmarker).www.optronik.com.pl64

Fiber optic equipment catalogue 2010CABLE SPARE LENGTHS MANAGEMENT EQUIPMENTSPARE LENGTH FRAMES AND BOXESFrames and boxes for managing and protection of cable spare lengths in lodgings, cable chambers and on aerial linepoles.SZK• SZK300 – adjustable frame (in range of 250-350 mm),can be adjusted for best fit to spare cable bendingradius and length. With optional installation kit forcable racks and cabinets.• SZK600 – adjustable frame (in range of 500-700 mm)can be adjusted for best fit to manhole size, sparecable bending radius and length.• SZK900 – adjustable frame (in range of 800-1000 mm), dedicated for large diameter (>16 mm)optical cable storage;• SZKn – optional outfit for installation on aerial linepoles;• made of bent and welded steel elements, zinc platedPZK• covers for SZK600 frames;• PZK 600 dimensions: 610x610x105 mm;• PZK 700 dimensions: 710x710x105 mm;• made of steel plates covered with protectiveelectrochemical coating and powder painted, color RAL7032.SZK/PZK• SZK/PZK600 – box, dimensions: 610x610x105 mm;• SZK/PZK700 – box, dimensions: 710x710x105 mm;SZKO600• full frame, dimensions: 600x600x100 mm with aPZK600 cover;• industrial padlock bolt as an option;• made of steel plates covered with protectiveelectrochemical coating and powder painted, color RAL7032.Ordering exampleSZK600Universal frame for wall mounting.SZKO600KFull frame with PZK 600 cover with industrial padlock bolt.www.optronik.com.pl65

Fiber optic equipment catalogue 2010PROTECTIVE TUBESReinforced tubes S661• Flexible PVC tubes, with spiral reinforcement;• type, by internal diameter: S661/16mm,S661/18mm;• high mechanical durability;• very high resistance to extreme environmentconditions, oils, lubricants or solvents;• recommended for applications in cable shafts, hardindustrial conditions and in the ground directly.Twofold corrugated tubes CoFlex• Low smoke, zero halogen tubes (LSZH);• internal diameter range: 10-50 mm;• enables installation on cables without threading;• recommended for indoor applications for cablebundles protection.Corrugated tubes Ingremio• Low smoke, zero halogen tubes (LSZH);• internal diameter range: 10-50 mm;• optional pilot wire for Ø>14 mm tubes;• recommended for indoor applications for cablebundles protection.www.optronik.com.pl66

Fiber optic equipment catalogue 2010BURIED CABLE CONTAINERS HDPEThe container incorporates a polyethylene body and a cover with support tube which directly carries vertical tension.The body shape provides proper anchoring in the ground.ZZ-PE container make is designed only for cable spare lengths storage. Other makes have a pouch for domeclosures installation. The container can usually store from 50 m of Ø16 mm cable to 100 m of Ø12 mm cable.The corners in lower part of the body are formed to enable installation of tight glands for insertion of protectivesecondary tubes with diameters of 32 mm and 40 mm (three in each corner). Glands can be installed individually byfitter or at make if required.Standard equipment includes cover sealing kit.ZZ-PE-1Container for spare cable lengths storage and one domeclosure.ZZ-PE-2Container for spare cable lengths storage and two domeclosures.ZZ-PEContainer for spare cable lengths storage without pouch.Main features• low weight – no need for using heavy equipment for transport and installation;• superior leak tightness, including cable and tube insertion points;• fast and easy installation in extreme environmental conditions: high ground water level, rain,low temperature;• stiff body provides good durability and excellent resistance to corrosion, chemicals or low temperature;• 100% recyclable, environment friendly product.Technical dataMaterial: polyethylene HDPEWeight: body ZZ-PE – 14 kg;body ZZ-PE-1 – 17 kg;body ZZ-PE-2 – 20 kg;cover – 6,5 kg.Operating chamber dimensions: diameter – 780 mm, height – 330 mmInner dimensions of closure holding pouch: diameter – 220 mm, length – 350 mmManhole entrance diameter: 600 mmNumber of corners for tube insertion:ZZ-PE – 4;ZZ-PE-1 – 3;ZZ-PE-2 – 2.www.optronik.com.pl67