Catalogue of optical equipment Catalogue of ... - Optronik Sp. z o.o.

Fiber optic equipment catalogue 2010FIBER OPTIC INTERCONNECTING COMPONENTSCABLE ASSEMBLIESFiber optic patch cords are made of highest quality SENKO and R&M components that conform to optical interfacestandards described in IEC/PN-EN 61754. Connector plugs are terminated on modern assembly line SENKO APC8000 and verified by means of Data Pixel andEXFO measurement equipment:KONCENTRIK – measurement equipment forferrule eccentricity verification as well as foreccentricity measurements and tuning ofterminated connectors.DAISI / DASI MT – optical interferometer for 1,25and 2,5 mm connectors and MT / MTRJ end facegeometry measurements.IQS 12001 – optical connectors and passivedevices insertion loss and return loss computermeasurement test set;FOT150 – optical connectors insertion loss andreturn loss measurement test set kit.All offered connectors are compliant with therequirements for interfaces according to PN-EN 61754 and PN-EN 61755. All cable assemblies are compliant withperformance standards series PN-EN 50377 and internal standards of Polish Telecom ZN-05/TPSA-044 forenvironment of U category according to PN-EN 61753-1 (uncontrolled environment, temperature range from –25 to+70°C, relative humidity 5%-95%).Customized products include connectors for use in environmental category E according to PN-EN 61753-1 (extremeenvironment, temperature range from –40 to +85°C, relative humidity 0%-98%, humidity condensation, industrialatmosphere).Plugs are offered in three attenuation grades: S-standard, P-premium, M-master.Standard – high performance plugs providing very good random mate attenuation performance, compliant with IECand PN-EN standards as well as corporate TP S.A. standard. Performance of standard grade plugs fulfilsrequirements of most currently used fiber optic telecommunication systems (SDH, CWDM and CATV).Premium – plugs for most requiring customers, dedicated for use in high-end DWDM systems with high Power levelsand in case of tight optical line loss budget.Master – selection plugs, dedicated for test and measurement and for extremely high optical Power levels in opticalfibers (>30 dBm).Main geometrical parameters of SM PC and APC plugsParameter Standard Premium MasterRadius of curvature PC 2,5/1,25 mm10–25 mm/ 7–15mmRadius of curvature APC5–12mmFiber protrusion/undercut(spherical fit) PC and APC+50nm/ -50nmApex offset for PC and APC plugs < 50um (typical) ≤ 50um ≤ 30umAPC 8° angle tolerance ± 0,3° ± 0,3° ± 0,2°PC angle tolerance ± 0,2° ± 0,2° ± 0,1°Key positioning tolerance for APC ± 0,5° ± 0,5° ± 0,3°Fiber core concentricity in ferrulefor PC and APC plugs≤ 1,5um ≤ 1,0um ≤ 0,3umPC and APC key tuning No Yes Yeswww.optronik.com.pl3