Power Distribution Board SIVACON S4 - Flexible and cost ... - Industry

© Siemens AG 2010Power Distribution BoardSIVACON S4 - Flexible andcost-effectiveLow-voltage power distribution board SIVACON S4SIVACON S4 is an AS (TTA-TSK) switchgear and controlgear system, type testedaccording to IEC 60439-1, for installation as primary or secondary boards in industrialand service sector facilities, including hospitals, shopping centres, banks, schools.7 Easy and quick assembly with amodern designThe modern design makes marking andoperation of the built-in components easyand reliable. A clear separation of the functionalareas, markings on all frame componentsthat facilitate assembly and thedescription of the necessary steps in themounting instructions ensure quick andeasy assembly.7 Safety in the futureThe SIVACON S4 system is future-proof andalready complies with the requirements ofthe standard IEC 61439-2.Highlights7 Compact, space-saving and flexibledesign through the modular system /side-by-side cabinet system in frametype of construction, expandable inwidth or depth7 Safe grounding, e.g. through doorhinges with grounding function7 Safety through TTA test according toIEC 60439-1 and design verificationby verification tests according toIEC 61439-27 Fast and safe planning and configurationwith the free SIMARIS CFB softwareAnswers for infrastructure.

© Siemens AG 2010Low-voltage Power Distribution BoardOverviewThe SIVACON S4 energy distribution concept consists of a fullline-up of boards in galvanised chromed sheet steel, of sturdydesign, suitable for any installation modality: self-standing, flushor wall-mounted. SIVACON S4 low-voltage power distributionBenefits• Type-tested switchgear and controlgear assembly in accordancewith IEC 60439-1, EN 60439-1• Modular system delivered as flat pack (delivery of packagedassembly kits in the form of individual and standard componentswith assembly drawing for do-it-yourself installation)• New design, ventilation and locking system• Colour RAL 7035• Doors with universal stop• Degrees of protection IP30, IP31, IP40, IP41, IP55• Busbar systems up to 4000 A, Icw up to 100 kA (1 sec), lpk upto 220 kA• Cubicle height 2000 mmSIVACON S4 - technical featuresboards are constructed according to a modular design systemand, by means of ad hoc assembly kits, can be combined tomeet all power distribution needs.• Base height optionally 100 mm or 200 mm• Cubicle width optionally 400 mm, 600 mm, 800 mm, 1000 mmor 1200 mm• Cubicle depth optionally 400 mm, 600 mm or 800 mm• Assembly kits for Siemens switching devices SENTRON 3WL,3VL, 3KL, 3KA as well as for built-in installation devices• Assembly kits for copper terminal modules for Sentron 3WL,3VL• Forms of internal separation 1, 2, 3, 4• Easy planning and configuration with the SIMARIS CFB softwaretool13241234Assembly kits withSENTRON 3WLAssembly kits withSENTRON 3KA / 3KLAssembly kits withSENTRON 3VLAssembly kits withbuilt-in installationdevicesI202_01484Assembly kits with SENTRON 3WL• Rated current 630 A - 3,200 A• 3-pole and 4-pole• Withdrawable and fixed-mounted design• Copper assembly kitsAssembly kits with SENTRON 3KA/ 3KL• SENTRON 3KL5/6 (LBS) switch disconnectorsRated current up to 630 A• SENTRON 3KL7/3KA7 (LBS) switch disconnectorsRated current up to 1,250 A• 3-pole and 4-pole• Fixed-mounted design• Door coupling rotary driveAssembly kits with SENTRON 3VL• Rated current 160 A - 1,600 A• 3-pole and 4-pole• Withdrawable, fixed-mounted and plug-in design• Manual, motor or rotary drive• Copper assembly kitsAssembly kits with built-in installation devices• Modular spacing24 with 600 mm cubicle width36 with 800 mm cubicle width• 150 mm or 200 mm matrix• Depth-adjustable multi-profile bus bar (AL 35 mm)• Silkclip rapid wiring system2Low-voltage Power Distribution Board

Ambient temperature 1) ≤ 35 °C© Siemens AG 2010Technical DataStandards and regulationsType AS (TTA-TSK) assembled protection and circuit breakersfor low-voltage (L.V. boards)Design verification by verification testsAir clearances and creepage distance Rated impulse withstand voltage (U imp )Overvoltage categoryPollution degreeIEC 60439-1EN 60439-1IEC 60349-212 kVIV3Internal separation forms 1, 2b, 3b,4a, 4bRated insulation voltage (U i )1000 VRated operational voltage (U e ) Up to 690 VRated frequency50/60 HzRated current (In) of Main horizontal bars Rated current Up to 4000 A(3-pole and 4-pole) busbar system Rated peak current of busbar Up to 220 kAsystem (I pk )Rated short-time current ofbusbar system (I cw ) Up to 100 kA, 1sProtection of people in the event of internal arcs Type tested according to IEC 61641 Rated utilisation voltage 400 VDegree of protection ≤ IP40, without glazed door Rated short-time current without extra kit 50 kALength of internal arc without extra kit 100 msLength of internal arc with extra kit300 msSurface treatment Cubicle, interior components, enclosure Galvanised min. 20 µmCoated with RAL 7035 powder Epoxy resin RAL 7035Cold phosphatisedThickness of coating min. 70 µmInsulation class According to IEC 61140, EN 61140 SK1Degree of protection According to IEC 60529, EN 60529 IP 30, IP 31, IP 40, IP 41, IP 55Resistance to mechanical impacts According to IEC 62262, paragraph 9.6 IP 3X IK08≥ IP 4XIK10Additional static loads on frame components Front frame revolving 1.0 kgfixed5.0 kgCovers with quick closing screws, H 50-300mm 0.5 kgwith quick closing screws, H 350-550mm 1.0 kgwith quick closing screws, H 600-800mm 2.0 kgwith hinges0.0 kgInternal inner door2.5 kgInternal door / double door W 400, 600mm 10.0 kgW 800mm5.0 kgW 1000, 1200mm2.5 kgH 150-200mm0.5 kgH 250-350mm1.5 kgH 400-800mm3.0 kgExterior covers10.0 kgMax construction weight According to IEC 62208, paragraph 9.3, 9.4, 1200 kgType tested with static load by lifting a cubicleOperating conditionsInstallation altitude ≤ 2000 mFrame parts: 2.5 mm – Galvanised chromed sheet steel, with 25mm hole pattern according to DIN 43 660Dimensions Exterior dimensions Height: 2000 mmWidth:400, 600, 800, 1000, 1200 mmDepth:400, 600, 800 mmBase Height: 100, 200 mm1) For different ambient temperatures and installation altitudes, take into account the appropriate correction factors (see LV 56/chapter on Planning andConfiguration)Low-voltage Power Distribution Board 3

© Siemens AG 2010More informationSIVACON S4 - the perfectly matched toollandscapeLV56 catalogwith description,product selection,configuration notesMounting manualproduct description,mounting illustration,production notesSimaris CFB softwarefor the management ofproject and customerdata,for the selectedcomponents pricing,for the generation ofoffers, views, singleline,order lists, ....Operating instructionsstorage,errection and operationhints,detailled assemblinginstructions in wordand pictureAdvertising brochuredesign highlights,custumer benefits,typical applications,technical data.The information provided in this brochure contains descriptions or characteristics of performancewhich in case of actual use do not always apply as described or which may change asa result of further development of the products. An obligation to provide the respective characteristicsshall only exist if expressly agreed in the terms of contract. Availability and technicalspecifications are subject to change without notice.All product designations may be registered trademarks or product names of Siemens AG orsupplier companies whose use by third parties for their own purposes may violate the rightsof the owner.© Siemens AG 2010 • Order No.: E10003-E38-10T-G2181-7600 • PI 0310 2. DB EnSiemens AGIndustry SectorBuilding Technologies DivisionPostfach 10 09 5393009 REGENSBURGGERMANYwww.siemens.com/sivacon