SECTION 6: X-WEDGE - S&S Cycle

2007-2012 X-Wedge ®S&S ®5-speed Transmission CaseFitment• Modified 1989-’99 Harley-Davidson® Softail® chassis• Similar aftermarket chassisParts forTwin Cam 96 /103 2007-2012OPTIONS• Natural, wrinkle black powdercoat, polished finishes• Additional parts available• Polished billet trap doorKIT CONTENTS• Transmission case• Bearing and seals• Shift lever adjustment screw• Shifter shaft guide• All studs and dowel pins required (installed)• InstructionsNOTEs:Bearing and seals are installed incase kits with bearings and seals.A low contact-style countershaft gear must be used in this transmission case to match the1980-’84 main drive gear required. Harley-Davidson® replaced low-contact gears with highcontactgears on 1994 international big twin models and 1995 U.S. models. Low and highcontact gears may not be mixed.S&S trap doors are of the 1987-’99 style. S&S recommends using this style trap door andend cover with the “ball and ramp” clutch actuator. The strength of the earlier, lever-typeactuator is marginal for heavy clutch springs sometimes required in high-performanceapplications.Extra parts needed to installThe late transmission mounting plate (H-D® #47698-86B) must be used with these cases.56-10475-speed transmission casein wrinkle black powdercoat.S&S ®XW-R Transmission Case Kitsfor X-Wedge ® EnginesS&S® 5-Speed Transmission Cases for modifiedHarley-Davidson® Softail® Chassis or similar aftermarket chassisDescription Natural Black PolishedCase w/Bearing & Seals 56-1044 56-1047 56-1076Optional Accessories for S&S®5-Speed Transmission CasesDescriptionPart No.Billet Trap Door Kit 56-102756-1027Trap Door AssemblyPERFORMANCEPARTSParts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012Parts forVictory®, Off-road& MetricRacingProductsThis series of transmission cases is for the S&S X-Wedge engine in the Rolling Thunder RubberMounted Bagger or FXR style frames. Available in several styles for left side drive five and sixspeedtransmissions and five-speed right side drive transmissions. Cases are available in silverpowdercoat, wrinkle black powdercoat, and polished finishes.This case is a must for anyone who intends to use the Rolling Thunder Rubber Mounted X-Wedgeframe to build a custom bike. Case kits come complete with hardware and mounting plate, andare compatible with stock and other five-speed gear sets.Tools & ShopSuppliesDealer Services& Promo ItemsS&S® XW-R Transmission Cases for S&S X-Wedge® EnginesDescription Black Silver PolishedFive Speed Left Side Drive 106-3376 106-3377 106-3375Five Speed Right Side Drive* 106-3384 106-3385 106-3383* Machined to accept most aftermarket RSD Transission kits that fit in stock transmission cases.Accommodates 250 rear tire.Replacement HardwareTransmission Mounting PlateSilver ................................ 106-3098Wrinkle Black Powdercoat ............. 106-3097Chorme .............................. 106-3096Hardware Kit ......................... 106-3359Warranty &Company PolicyOEM Cross ReferenceAppendix & IndexVisit us at www.sscycle.com6-21