SECTION 6: X-WEDGE - S&S Cycle

S e ction 6:Parts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006PushrodsFor S&S ® X-Wedge ® EnginesUnlike other S&S engines and stock engines modified with S&S high performance kits, allproduction X-Wedge engines are the same height. Changes in stroke are limited to whatcan be accommodated by changing the piston deck height, without changing cylinderlength. This limits the range of strokes available, but the range of bore size provides a widerange of available displacements. Based on this, pushrod length is determined by cam androcker arm combination2007-2012 X-Wedge®Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012Part NumbersX-Wedge® Pushrod Sets – All displacements with stock rocker armsStock Length (for use with 545, 548 and 569 cams) .................106-0699+.030" length (for use with 618 cams) ............................930-0021X-Wedge® Pushrod Set – All displacements with aluminum roller rocker arms-0.35" length (for use with all cams) ..............................930-0017Parts forVintage Engines1926-1984Pushrod set part #106-0699 features four pushrods of the same length.OEM Cross ReferenceAppendix & IndexWarranty &Company PolicyDealer Services& Promo ItemsTools & ShopSuppliesRacingProductsParts forVictory®, Off-road& MetricParts forX-Wedge®2007-20126-4Order toll free 866-244-2673