4412 ACCELERATOR DY 070 (English (GB)) Huntsman ... - AMI-CON

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.026/14SECTION 7: Handling and storageAdvice on generaloccupational hygiene:Eating, drinking and smoking should be prohibited in areas where this material ishandled, stored and processed. Workers should wash hands and face beforeeating, drinking and smoking. Remove contaminated clothing and protectiveequipment before entering eating areas. See also Section 8 for additionalinformation on hygiene measures.7.2 Conditions for safestorage, including anyincompatibilities:Store between the following temperatures: 2 to 40°C (35.6 to 104°F). Store inaccordance with local regulations. Store in original container protected from directsunlight in a dry, cool and well-ventilated area, away from incompatible materials(see section 10) and food and drink. Store locked up. Keep container tightly closedand sealed until ready for use. Containers that have been opened must be carefullyresealed and kept upright to prevent leakage. Do not store in unlabelled containers.Use appropriate containment to avoid environmental contamination.Storage hazard classHuntsman AdvancedMaterials: Storage class 8, Corrosive substances7.3 Specific end use(s)Recommendations :Industrial sector specificsolutions:Not available.Not available.SECTION 8: Exposure controls/personal protectionThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).8.1 Control parametersOccupational exposure limitsNo exposure limit value known.Recommended monitoringproceduresDerived effect levelsNo DELs available.:If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment. Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of hazardoussubstances.Predicted effect concentrationsNo PECs available.8.2 Exposure controlsAppropriate engineeringcontrolsIndividual protection measures: If user operations generate dust, fumes, gas, vapour or mist, use processenclosures, local exhaust ventilation or other engineering controls to keep workerexposure to airborne contaminants below any recommended or statutory limits.Date of issue / Date of revision : 1/13/2012.6/14