4412 ACCELERATOR DY 070 (English (GB)) Huntsman ... - AMI-CON

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)1.1 Product identifierProduct nameProduct description :SAFETY DATA SHEETACCELERATOR DY 070SECTION 1: Identification of the substance/mixture and of thecompany/undertaking:ACCELERATOR DY 070EC number :Chemical name: 1-methylimidazoleCAS number : 616-47-7Product code : 000476071.2 Relevant identified uses of the substance or mixture and uses advised againstProduct use : Ancillary product for structural composites1.3 Details of the supplier of the safety data sheetSuppliere-mail address of personresponsible for this SDS: Huntsman Advanced Materials (Europe)BVBAEverslaan 453078 Everberg / BelgiumTel.: +41 61 299 20 41Fax: +41 61 299 20 40: Global_Product_EHS_AdMat@huntsman.com1.4 Emergency telephone numberSupplierTelephone number : EUROPE: +32 35 75 1234France ORFILA: +33(0)145425959ASIA: +65 6336-6011China: +86 20 39377888Australia: 1800 786 152New Zealand: 0800 767 437USA: +1/800/424.9300SECTION 2: Hazards identification2.1 Classification of the substance or mixtureProduct definition : Mono-constituent substanceClassification according to Regulation (EC) No. 1272/2008 [CLP/GHS]Acute Tox. 4, H302Acute Tox. 3, H311Skin Corr. 1B, H314Eye Dam. 1, H318Classification according to Directive 67/548/EEC [DSD]Xn; R21/22C; R34See Section 16 for the full text of the R phrases or H statements declared above.See Section 11 for more detailed information on health effects and symptoms.2.2 Label elementsDate of issue / Date of revision : 1/13/2012.1/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.022/14SECTION 2: Hazards identificationHazard pictograms :Signal word :Hazard statements :Precautionary statementsResponse :Storage :Disposal :DangerToxic in contact with skin.Harmful if swallowed.Causes severe skin burns and eye damage.General: Not applicable.Prevention : Wear protective gloves: >8 hours (breakthrough time): Ethyl Vinyl Alcohol Laminate(EVAL), butyl rubber. Wear eye or face protection. Wear protective clothing.Supplemental labelelementsIF INHALED: Remove victim to fresh air and keep at rest in a position comfortablefor breathing. Immediately call a POISON CENTER or physician. IF SWALLOWED:Immediately call a POISON CENTER or physician. Do NOT induce vomiting. IF ONSKIN (or hair): Take off immediately all contaminated clothing. Rinse skin withwater or shower. Immediately call a POISON CENTER or physician. IF IN EYES:Immediately call a POISON CENTER or physician.Store locked up.Not applicable.Special packaging requirementsContainers to be fittedwith child-resistantfastenings: Not applicable.Tactile warning of danger: Not applicable.:Not applicable.2.3 Other hazardsSubstance meets thecriteria for PBT accordingto Regulation (EC) No.1907/2006, Annex XIIISubstance meets thecriteria for vPvB accordingto Regulation (EC) No.1907/2006, Annex XIIIOther hazards which donot result in classification: PBT: No.P: No. B: No. T: No.: vPvB: No.vP: No. vB: No.:Not available.Date of issue / Date of revision : 1/13/2012.2/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.02SECTION 2: Hazards identification3/14SECTION 3: Composition/information on ingredientsSubstance/mixtureProduct/ingredientname:Mono-constituent substanceIdentifiers1-methylimidazole CAS: 616-47-7EC: 210-484-7% 67/548/EEC Regulation (EC) No. Type1272/2008 [CLP]60-100 Xn; R21/22C; R34See section 16 forthe full text of the R-phrases declaredaboveClassificationAcute Tox. 4, H302Acute Tox. 3, H311Skin Corr. 1B, H314Eye Dam. 1, H318See Section 16 for thefull text of the Hstatements declaredabove.[A]There are no additional ingredients present which, within the current knowledge of the supplier, are classified andcontribute to the classification of the substance and hence require reporting in this section.Type[A] Constituent[B] Impurity[C] Stabilising additiveOccupational exposure limits, if available, are listed in Section 8.SECTION 4: First aid measures4.1 Description of first aid measuresEye contact: Get medical attention immediately. Call a poison center or physician. Immediatelyflush eyes with plenty of water, occasionally lifting the upper and lower eyelids.Check for and remove any contact lenses. Continue to rinse for at least 10 minutes.Chemical burns must be treated promptly by a physician.InhalationSkin contactIngestion:::Get medical attention immediately. Call a poison center or physician. Removevictim to fresh air and keep at rest in a position comfortable for breathing. If it issuspected that fumes are still present, the rescuer should wear an appropriate maskor self-contained breathing apparatus. If not breathing, if breathing is irregular or ifrespiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.It may be dangerous to the person providing aid to give mouth-to-mouthresuscitation. If unconscious, place in recovery position and get medical attentionimmediately. Maintain an open airway. Loosen tight clothing such as a collar, tie,belt or waistband.Get medical attention immediately. Call a poison center or physician. Wash withplenty of soap and water. Remove contaminated clothing and shoes. Washcontaminated clothing thoroughly with water before removing it, or wear gloves.Continue to rinse for at least 10 minutes. Chemical burns must be treated promptlyby a physician. Wash clothing before reuse. Clean shoes thoroughly before reuse.Get medical attention immediately. Call a poison center or physician. Wash outmouth with water. Remove dentures if any. Remove victim to fresh air and keep atrest in a position comfortable for breathing. If material has been swallowed and theexposed person is conscious, give small quantities of water to drink. Stop if theexposed person feels sick as vomiting may be dangerous. Do not induce vomitingunless directed to do so by medical personnel. If vomiting occurs, the head shouldbe kept low so that vomit does not enter the lungs. Chemical burns must be treatedpromptly by a physician. Never give anything by mouth to an unconscious person. Ifunconscious, place in recovery position and get medical attention immediately.Maintain an open airway. Loosen tight clothing such as a collar, tie, belt orwaistband.Date of issue / Date of revision : 1/13/2012.3/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.024/14SECTION 4: First aid measuresProtection of first-aiders: No action shall be taken involving any personal risk or without suitable training. If it issuspected that fumes are still present, the rescuer should wear an appropriate maskor self-contained breathing apparatus. It may be dangerous to the person providingaid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughlywith water before removing it, or wear gloves.4.2 Most important symptoms and effects, both acute and delayedPotential acute health effectsEye contact: Causes serious eye damage.InhalationSkin contactIngestionOver-exposure signs/symptomsEye contactInhalationSkin contactIngestion: May give off gas, vapor or dust that is very irritating or corrosive to the respiratorysystem.: Causes severe burns. Toxic in contact with skin.: Harmful if swallowed. May cause burns to mouth, throat and stomach.: Adverse symptoms may include the following:painwateringredness:::No specific data.Adverse symptoms may include the following:pain or irritationrednessblistering may occurAdverse symptoms may include the following:stomach pains4.3 Indication of any immediate medical attention and special treatment neededNotes to physician : Treat symptomatically. Contact poison treatment specialist immediately if largequantities have been ingested or inhaled.Specific treatments: Symptomatic treatment and supportive therapy as indicated. Following severeexposure the patient should be kept under medical review for at least 48 hours.SECTION 5: Firefighting measures5.1 Extinguishing mediaSuitable extinguishingmediaUnsuitable extinguishingmedia::Use an extinguishing agent suitable for the surrounding fire.None known.5.2 Special hazards arising from the substance or mixtureHazards from thesubstance or mixture: In a fire or if heated, a pressure increase will occur and the container may burst.Hazardous thermaldecomposition products:No specific data.5.3 Advice for firefightersSpecial precautions forfire-fighters:Promptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without suitabletraining.Date of issue / Date of revision : 1/13/2012.4/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.025/14SECTION 5: Firefighting measuresSpecial protectiveequipment for fire-fighters:Fire-fighters should wear appropriate protective equipment and self-containedbreathing apparatus (SCBA) with a full face-piece operated in positive pressuremode. Clothing for fire-fighters (including helmets, protective boots and gloves)conforming to European standard EN 469 will provide a basic level of protection forchemical incidents.SECTION 6: Accidental release measures6.1 Personal precautions, protective equipment and emergency proceduresFor non-emergencypersonnel: No action shall be taken involving any personal risk or without suitable training.Evacuate surrounding areas. Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilt material. Do not breathe vapour or mist.Provide adequate ventilation. Wear appropriate respirator when ventilation isinadequate. Put on appropriate personal protective equipment.For emergency responders :If specialised clothing is required to deal with the spillage, take note of anyinformation in Section 8 on suitable and unsuitable materials. See also theinformation in "For non-emergency personnel".6.2 Environmentalprecautions:Avoid dispersal of spilt material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).6.3 Methods and materials for containment and cleaning upSmall spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mopup if water-soluble. Alternatively, or if water-insoluble, absorb with an inert drymaterial and place in an appropriate waste disposal container. Dispose of via alicensed waste disposal contractor.Large spill :Stop leak if without risk. Move containers from spill area. Approach the releasefrom upwind. Prevent entry into sewers, water courses, basements or confinedareas. Wash spillages into an effluent treatment plant or proceed as follows.Contain and collect spillage with non-combustible, absorbent material e.g. sand,earth, vermiculite or diatomaceous earth and place in container for disposalaccording to local regulations (see section 13). Dispose of via a licensed wastedisposal contractor. Contaminated absorbent material may pose the same hazardas the spilt product. Note: see section 1 for emergency contact information andsection 13 for waste disposal.6.4 Reference to othersections:See Section 1 for emergency contact information.See Section 8 for information on appropriate personal protective equipment.See Section 13 for additional waste treatment information.SECTION 7: Handling and storageThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).7.1 Precautions for safe handlingProtective measures: Put on appropriate personal protective equipment (see Section 8). Do not get ineyes or on skin or clothing. Do not breathe vapour or mist. Do not ingest. If duringnormal use the material presents a respiratory hazard, use only with adequateventilation or wear appropriate respirator. Keep in the original container or anapproved alternative made from a compatible material, kept tightly closed when notin use. Empty containers retain product residue and can be hazardous. Do notreuse container.Date of issue / Date of revision : 1/13/2012.5/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.026/14SECTION 7: Handling and storageAdvice on generaloccupational hygiene:Eating, drinking and smoking should be prohibited in areas where this material ishandled, stored and processed. Workers should wash hands and face beforeeating, drinking and smoking. Remove contaminated clothing and protectiveequipment before entering eating areas. See also Section 8 for additionalinformation on hygiene measures.7.2 Conditions for safestorage, including anyincompatibilities:Store between the following temperatures: 2 to 40°C (35.6 to 104°F). Store inaccordance with local regulations. Store in original container protected from directsunlight in a dry, cool and well-ventilated area, away from incompatible materials(see section 10) and food and drink. Store locked up. Keep container tightly closedand sealed until ready for use. Containers that have been opened must be carefullyresealed and kept upright to prevent leakage. Do not store in unlabelled containers.Use appropriate containment to avoid environmental contamination.Storage hazard classHuntsman AdvancedMaterials: Storage class 8, Corrosive substances7.3 Specific end use(s)Recommendations :Industrial sector specificsolutions:Not available.Not available.SECTION 8: Exposure controls/personal protectionThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).8.1 Control parametersOccupational exposure limitsNo exposure limit value known.Recommended monitoringproceduresDerived effect levelsNo DELs available.:If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment. Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of hazardoussubstances.Predicted effect concentrationsNo PECs available.8.2 Exposure controlsAppropriate engineeringcontrolsIndividual protection measures: If user operations generate dust, fumes, gas, vapour or mist, use processenclosures, local exhaust ventilation or other engineering controls to keep workerexposure to airborne contaminants below any recommended or statutory limits.Date of issue / Date of revision : 1/13/2012.6/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.027/14SECTION 8: Exposure controls/personal protectionHygiene measures :Eye/face protectionSkin protectionHand protectionMaterial of gloves forlong term application(BTT>480min):Material of gloves forshort term/splashapplication(10min

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.02SECTION 9: Physical and chemical propertiesBurning time: Not applicable.Burning rate: Not applicable.8/14Upper/lower flammability orexplosive limitsVapour pressureVapour densityRelative densitySolubility(ies)Water solubility :::::Not available.0.015 kPa [20°C]Not available.1.04misciblePartition coefficient: n-octanol/water (LogKow)Auto-ignition temperatureDecomposition temperatureViscosityExplosive propertiesOxidising properties :::::20 deg CNot available.Not available.: >200°CDynamic:

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.029/14SECTION 11: Toxicological informationConclusion/SummarySkin :Eyes :Respiratory :SensitiserConclusion/SummaryMutagenicityCarcinogenicityReproductive toxicityTeratogenicity: No additional information.Specific target organ toxicity (single exposure)Not available.Specific target organ toxicity (repeated exposure)Not available.Aspiration hazardNot available.No additional information.No additional information.No additional information.Information on the likelyroutes of exposure:Not available.Potential acute health effectsInhalationIngestionSkin contactEye contact: May give off gas, vapor or dust that is very irritating or corrosive to the respiratorysystem.:Harmful if swallowed. May cause burns to mouth, throat and stomach.: Causes severe burns. Toxic in contact with skin.: Causes serious eye damage.Symptoms related to the physical, chemical and toxicological characteristicsInhalation: No specific data.Ingestion: Adverse symptoms may include the following:stomach painsSkin contactEye contact:Adverse symptoms may include the following:pain or irritationrednessblistering may occur: Adverse symptoms may include the following:painwateringrednessDelayed and immediate effects and also chronic effects from short and long term exposureShort term exposurePotential immediateeffects:Not available.Potential delayed effects :Long term exposurePotential immediateeffects:Not available.Not available.Potential delayed effects :Potential chronic health effectsConclusion/SummaryGeneral :Not available.: Not available.No known significant effects or critical hazards.Date of issue / Date of revision : 1/13/2012.9/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing :Date of issue :13 January 201213 January 2012SECTION 11: Toxicological informationCarcinogenicity :Mutagenicity :Teratogenicity :Developmental effectsFertility effectsOther informationSECTION 12: Ecological information12.1 ToxicityMSDS no.Version :No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.: No known significant effects or critical hazards.: No known significant effects or critical hazards.: Not available.: 00047607Product/ingredient name TestEndpoint Exposure Species Result1-methylimidazole DIN DIN 38412 part 9 Acute EC50 72 hours Algae 180.7 mg/LDIN DIN 38412 Part 8 Acute EC50 17 hours Bacteria 1050 mg/LEU Acute EC50 48 hours Daphnia 267.9 mg/LStaticDIN DIN 38412 Part 15 Acute LC50 96 hoursStaticFish 100 to220mg/L3.0210/1412.2 Persistence and degradabilityProduct/ingredient name Test Period Result1-methylimidazole OECD 301F Ready Biodegradability -Manometric Respirometry Test28 days 0 to 10 %Product/ingredient name Aquatic half-life Photolysis Biodegradability1-methylimidazole - - Not readily12.3 Bioaccumulative potentialProduct/ingredient name LogPow BCF Potential1-methylimidazole 0.6 - low12.4 Mobility in soilSoil/water partitioncoefficient (KOC)Mobility::Not available.Not available.12.5 Results of PBT and vPvB assessmentPBT: PBT: No.P: No. B: No. T: No.vPvB: vPvB: No.vP: No. vB: No.12.6 Other adverse effects : No known significant effects or critical hazards.12.7 Other ecological informationDate of issue / Date of revision : 1/13/2012.10/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.0211/14SECTION 13: Disposal considerationsThe information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should beconsulted for any available use-specific information provided in the Exposure Scenario(s).13.1 Waste treatment methodsProductMethods of disposalHazardous waste :Yes.European waste catalogue (EWC)Waste code:The generation of waste should be avoided or minimised wherever possible.Significant quantities of waste product residues should not be disposed of via thefoul sewer but processed in a suitable effluent treatment plant. Dispose of surplusand non-recyclable products via a licensed waste disposal contractor. Disposal ofthis product, solutions and any by-products should at all times comply with therequirements of environmental protection and waste disposal legislation and anyregional local authority requirements.Waste designation07 02 04* other organic solvents, washing liquids and mother liquorsPackagingMethods of disposal :Special precautions :The generation of waste should be avoided or minimised wherever possible. Wastepackaging should be recycled. Incineration or landfill should only be consideredwhen recycling is not feasible.This material and its container must be disposed of in a safe way. Care should betaken when handling emptied containers that have not been cleaned or rinsed out.Empty containers or liners may retain some product residues. Avoid dispersal ofspilt material and runoff and contact with soil, waterways, drains and sewers.SECTION 14: Transport information14.1 UN number 14.2 UN proper shipping nameADR/RIDIMDGIATAUN2922UN2922UN2922Corrosive liquid, toxic, n.o.s. 1-METHYL IMIDAZOLECorrosive liquid, toxic, n.o.s. (1-METHYL IMIDAZOLE)Corrosive liquid, toxic, n.o.s. (1-METHYL IMIDAZOLE)14.3 Transporthazard class(es)14.4 Packinggroup14.5Environmentalhazards14.6 Specialprecautions foruserAdditionalinformationADR/RID8(6.1)IINo.Not available.Hazardidentificationnumber86Specialprovisions274Tunnel codeEIMDG8(6.1)IINo.Not available.Emergencyschedules (EmS)F-A, S-BDate of issue / Date of revision : 1/13/2012.11/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.0212/14SECTION 14: Transport informationIATA8(6.1)IINo.Not available.Passenger andCargo AircraftQuantity limitation:1 LPackaginginstructions: 851Cargo AircraftOnlyQuantitylimitation: 30 LPackaginginstructions: 85514.7 Transport in bulkaccording to Annex II ofMARPOL 73/78 and the IBCCode: Not applicable.SECTION 15: Regulatory information15.1 Safety, health and environmental regulations/legislation specific for the substance or mixtureEU Regulation (EC) No. 1907/2006 (REACH)Annex XIV - List of substances subject to authorisationSubstances of very high concernNone of the components are listed.Annex XVII - Restrictionson the manufacture,placing on the market anduse of certain dangeroussubstances, mixtures andarticles:Not applicable.Other EU regulationsEurope inventoryBlack List ChemicalsPriority List ChemicalsIntegrated pollutionprevention and controllist (IPPC) - AirIntegrated pollutionprevention and controllist (IPPC) - WaterNational regulationsReferencesInternational regulationsChemical WeaponsConvention List Schedule IChemicalsChemical WeaponsConvention List Schedule IIChemicals: All components are listed or exempted.: Not listed: Not listed: Not listed: Not listed: The provision of Safety Data Sheets comes under Regulation 6 of CHIP (CHIP is therecognised abbreviation for the Chemicals Hazard Information and PackagingRegulations). This is an addition to the Health and Safety at Work Act 1974.: Not listed: Not listedDate of issue / Date of revision : 1/13/2012.12/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing :Date of issue :13 January 201213 January 2012SECTION 15: Regulatory informationChemical WeaponsConvention List Schedule IIIChemicals: Not listedMSDS no.Version :: 000476073.0213/1415.2 Chemical SafetyAssessmentSECTION 16: Other informationFull text of abbreviated RphrasesFull text of classifications[DSD/DPD]MSDS no. : 00047607Date of printingDate of issue/ Date ofrevision::1/13/2012.1/13/2012.Date of previous issueVersion:::::This product contains substances for which Chemical Safety Assessments are stillrequired.Indicates information that has changed from previously issued version.Abbreviations andacronymsFull text of abbreviated Hstatements: ATE = Acute Toxicity EstimateCLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.1272/2008]DNEL = Derived No Effect LevelEUH statement = CLP-specific Hazard statementPNEC = Predicted No Effect ConcentrationRRN = REACH Registration NumberProcedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]Acute Tox. 4, H302Acute Tox. 3, H311Skin Corr. 1B, H314Eye Dam. 1, H318Full text of classifications[CLP/GHS]Classification::H302H311H314H318C - CorrosiveXn - Harmful1/13/2012.3.02On basis of test dataCalculation methodCalculation methodCalculation methodHarmful if swallowed.Toxic in contact with skin.Causes severe skin burns and eye damage.Causes serious eye damage.JustificationAcute Tox. 3, H311 ACUTE TOXICITY: SKIN - Category 3Acute Tox. 4, H302 ACUTE TOXICITY: ORAL - Category 4Eye Dam. 1, H318 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1Skin Corr. 1B, H314 SKIN CORROSION/IRRITATION - Category 1BR21/22- Harmful in contact with skin and if swallowed.R34- Causes burns.Notice to readerWhile the information and recommendations in this publication are to the best of our knowledge, informationand belief accurate at the date of publication, NOTHING HEREIN IS TO BE CONSTRUED AS A WARRANTY,EXPRESS OR OTHERWISE.IN ALL CASES, IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE THE APPLICABILITY OF SUCHINFORMATION AND RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT FOR ITS OWNPARTICULAR PURPOSE.THE PRODUCT MAY PRESENT HAZARDS AND SHOULD BE USED WITH CAUTION. WHILE CERTAIN HAZARDSARE DESCRIBED IN THIS PUBLICATION, NO GUARANTEE IS MADE THAT THESE ARE THE ONLY HAZARDSTHAT EXIST.Hazards, toxicity and behaviour of the products may differ when used with other materials and are dependentupon the manufacturing circumstances or other processes. Such hazards, toxicity and behaviour should beDate of issue / Date of revision : 1/13/2012.13/14

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)ACCELERATOR DY 070Date of printing : 13 January 2012MSDS no.: 00047607Date of issue : 13 January 2012Version : 3.0214/14SECTION 16: Other informationdetermined by the user and made known to handlers, processors and end users.NO PERSON OR ORGANIZATION EXCEPT A DULY AUTHORIZED HUNTSMAN EMPLOYEE IS AUTHORIZED TOPROVIDE OR MAKE AVAILABLE DATA SHEETS FOR HUNTSMAN PRODUCTS. DATA SHEETS FROMUNAUTHORIZED SOURCES MAY CONTAIN INFORMATION THAT IS NO LONGER CURRENT OR ACCURATE.NO PART OF THIS DATA SHEET MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM, OR BY ANYMEANS, WITHOUT PERMISSION IN WRITING FROM HUNTSMAN. ALL REQUESTS FOR PERMISSION TOREPRODUCE MATERIAL FROM THIS DATA SHEET SHOULD BE DIRECTED TO HUNTSMAN, MANAGER,PRODUCT SAFETY AT THE ABOVE ADDRESS.Date of issue / Date of revision : 1/13/2012.14/14