HIGH PERFORMANCE LIQUID FILTRATION SYSTEM

the powerful and professionalfiltration supportFILTER ELEMENTMeshSEP Series Sintered Metal Filter Cartridge is vacuum sintered with serval optimal stainless steel mesh layers. Its rating rangesfrom 5μm to 200μm. It has features of precise filtration rating, heavy duty, high thermostability, being easy to clean and regenerate,low consumption cost, thus is particularly suitable for applications of high temperature, strong solvents and high pressure.■ Multi-layer sintered, optimal combination, heavy duty■ Excellent permeability, low pressure drop■ Easy to clean and back-flushing■ No fiber dropping, high thermostability and chemical resistanceFiberSEP Series Sintered Metal Filter Cartridge is made of stainless steel fibers by sintering, pleating and welding. Its filtrationratings ranges from 3μm to 100μm. It has uniform pore size, high filtration rating, high porosity, large surface area, high dirty holdingcapacity and high flowrate, thus is particularly suitable for applications of high temperature, strong solvents and high pressure. It isreusable after cleaning and regenerating.■ Excellent permeability, low pressure drop, high dirt holding capacity■ No changes of the pore size and shape in sintering processPorSEP Series Sintered Metal Filter Cartridge is sintered by super fine metallic powders. Its filtration rating ranges from 0.5μm to20μ. It has uniform pore size, high porosity, heavy duty. Thus it is particularly suitable for application of high temperature, strongsolvents and high pressure. It is reusable after cleaning and regenerating.■ High thermostability , repeatedly sterilizable at high temperature.■ Rigid structure, directly filtering without support■ High thermostability and corrosion resistance■ Metal fiber felt porosity is much more higher than wire mesh■ Good chemical resistance against solvents and acids and alkalis■ Reusable after cleaning and regeneratingPorSEPMeshSEPFiberSEPV-SEP Series Slotted Metal Filter Cartridge has spiral slot with filtration ratings of 25μm to 1500μm. The slot width is strictlyuniform and the filtration performance is effecient and consistent. The extremely smooth surface can reduce clogging and makescleaning easier through manual or automatic backflushing. V-SEP is particularly suitable to filter viscous liquids or remove stickyagglomeration and micro fiber impurities. It has rigid structure, high pressure resistance and super long service life.■ Spiral slot on surface, extremely smooth■ No fiber droping and little pore size changing when pressurized■ Heavy duty, resistance against forward and reverse high pressure■ Precision one-body shape, strict symmetrical uniform gap width■ Can be cleaned thoroughly easily■ Super long service lifeV-SEPFineSEP Series Melt Blown Filter Cartridge is made of bonding melt-blown polypropylene fibers and has three dimensionalmillipores inside. Pore sizes are large-to-small gradiently distributed from outside to inside. Its filtration rating ranges 1μm to 50μm.It can remove impurities in different sizes and has the advantages of high porosity, low pressure drop, long service life, low cost andgood pre-filtration performance. It is widely used in nominal filtration.■ Large filtration area, better pressure reisistance■ No media drops off and pore diameter changes along with pressure■ Gradient structure, high dirty loading capacity■ No chemical pollutant releasing, no bubbles while filtering■ Super fine pores, low pressure drop■ Long service lifeMicroSEP Series Wound Filter Cartridge is made of super fine fiber bundles wound on the porous support frame. Its filtrationrating ranges from 1μm to 50μm. It has the internal tight and external loose structure, which yields thus good depth filtrationperformance. Good pre-filtration performance and cost-effectivity make it widely used in the nominal filtration.■ Depth filtration with wound structure■ High dirty holding capacity, long service life■ Polypropylene, bleached cotton and glass fiber are available■ Internal tight and external loose structure, good pre-filtrationFineSEP222 Socket 226 Socket DOE Socket Fin EndMicroSEPRating Level Filtration Rating(μm) Optianal Length(inch) Cartridge SocketAbsolute ■ Rating 线 绕 式 深 度 过 滤 结 构 0.45,1,4.5,6,10,20,40,70 ■ 聚 丙 烯 , 脱 脂 棉 , 玻 纤 20/40/60 材 质 可 选Large Diameter O-Ring Seals■ 深 层 过 滤 , 纳 污 能 力 强 , 使 用 寿 命 长■ 外 松 内 紧 绕 制 , 赋 于 良 好 的 预 过 滤 效 果Absolute Rating 0.45,1,4.5,6,10,20,40,70 40/60 Large Diameter Double O-Ring SealsAbsolute Rating 0.45,1,3,5,10,20,30,50 10/20/30/40 DOE\222\226Absolute Rating 0.05,0.1,0.2,0.45,0.65 10/20/30/40 DOE\222\226Absolute Rating 0.1,0.2,0.45 10/20/30/40 DOE\222\226Absolute Rating 5,10,15,20,30,40,50,75,100,150,200 10/20/30/40 Male thread\DOE\222\226Absolute Rating 3,5,10,20,30,50,75,100 10/20/30/40 Male thread\DOE\222\226Absolute Rating 0.5,1,3,5,10,20 10/20/30/40 Male thread\DOE\222\226Absolute Rating 25,50,75,100,125,150,175,200,250,300,350,400 10/13/20/26/30/40/60 DOENominal Rating 1,5,10,20,30,50 10/20/30 DOENominal Rating 1,5,10,20,30,50 10/20/30/40 DOE■ Note: The information above is product overview. The specific selection requires comprehensive consideration ofvarious factors. Please contact LIVIC filtration engineers to get professional advice and detailed product information.Shanghai LIVIC Filtration System Co., Ltd.15